1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
|
// SPDX-License-Identifier: GPL-2.0+
/*
* Amlogic Meson-AXG Clock Controller Driver
*
* Copyright (c) 2016 Baylibre SAS.
* Author: Michael Turquette <mturquette@baylibre.com>
*
* Copyright (c) 2019 Baylibre SAS.
* Author: Neil Armstrong <narmstrong@baylibre.com>
*/
#include <linux/clk-provider.h>
#include <linux/platform_device.h>
#include <linux/reset-controller.h>
#include <linux/mfd/syscon.h>
#include "meson-aoclk.h"
#include "g12a-aoclk.h"
#include "clk-regmap.h"
#include "clk-dualdiv.h"
#define IN_PREFIX "ao-in-"
/*
* AO Configuration Clock registers offsets
* Register offsets from the data sheet must be multiplied by 4.
*/
#define AO_RTI_STATUS_REG3 0x0C
#define AO_RTI_PWR_CNTL_REG0 0x10
#define AO_RTI_GEN_CNTL_REG0 0x40
#define AO_CLK_GATE0 0x4c
#define AO_CLK_GATE0_SP 0x50
#define AO_OSCIN_CNTL 0x58
#define AO_CEC_CLK_CNTL_REG0 0x74
#define AO_CEC_CLK_CNTL_REG1 0x78
#define AO_SAR_CLK 0x90
#define AO_RTC_ALT_CLK_CNTL0 0x94
#define AO_RTC_ALT_CLK_CNTL1 0x98
/*
* Like every other peripheral clock gate in Amlogic Clock drivers,
* we are using CLK_IGNORE_UNUSED here, so we keep the state of the
* bootloader. The goal is to remove this flag at some point.
* Actually removing it will require some extensive test to be done safely.
*/
#define AXG_AO_GATE(_name, _reg, _bit) \
static struct clk_regmap g12a_aoclk_##_name = { \
.data = &(struct clk_regmap_gate_data) { \
.offset = (_reg), \
.bit_idx = (_bit), \
}, \
.hw.init = &(struct clk_init_data) { \
.name = "g12a_ao_" #_name, \
.ops = &clk_regmap_gate_ops, \
.parent_names = (const char *[]){ IN_PREFIX "mpeg-clk" }, \
.num_parents = 1, \
.flags = CLK_IGNORE_UNUSED, \
}, \
}
AXG_AO_GATE(ahb, AO_CLK_GATE0, 0);
AXG_AO_GATE(ir_in, AO_CLK_GATE0, 1);
AXG_AO_GATE(i2c_m0, AO_CLK_GATE0, 2);
AXG_AO_GATE(i2c_s0, AO_CLK_GATE0, 3);
AXG_AO_GATE(uart, AO_CLK_GATE0, 4);
AXG_AO_GATE(prod_i2c, AO_CLK_GATE0, 5);
AXG_AO_GATE(uart2, AO_CLK_GATE0, 6);
AXG_AO_GATE(ir_out, AO_CLK_GATE0, 7);
AXG_AO_GATE(saradc, AO_CLK_GATE0, 8);
AXG_AO_GATE(mailbox, AO_CLK_GATE0_SP, 0);
AXG_AO_GATE(m3, AO_CLK_GATE0_SP, 1);
AXG_AO_GATE(ahb_sram, AO_CLK_GATE0_SP, 2);
AXG_AO_GATE(rti, AO_CLK_GATE0_SP, 3);
AXG_AO_GATE(m4_fclk, AO_CLK_GATE0_SP, 4);
AXG_AO_GATE(m4_hclk, AO_CLK_GATE0_SP, 5);
static struct clk_regmap g12a_aoclk_cts_oscin = {
.data = &(struct clk_regmap_gate_data){
.offset = AO_RTI_PWR_CNTL_REG0,
.bit_idx = 14,
},
.hw.init = &(struct clk_init_data){
.name = "cts_oscin",
.ops = &clk_regmap_gate_ro_ops,
.parent_names = (const char *[]){ IN_PREFIX "xtal" },
.num_parents = 1,
},
};
static const struct meson_clk_dualdiv_param g12a_32k_div_table[] = {
{
.dual = 1,
.n1 = 733,
.m1 = 8,
.n2 = 732,
.m2 = 11,
}, {}
};
/* 32k_by_oscin clock */
static struct clk_regmap g12a_aoclk_32k_by_oscin_pre = {
.data = &(struct clk_regmap_gate_data){
.offset = AO_RTC_ALT_CLK_CNTL0,
.bit_idx = 31,
},
.hw.init = &(struct clk_init_data){
.name = "g12a_ao_32k_by_oscin_pre",
.ops = &clk_regmap_gate_ops,
.parent_names = (const char *[]){ "cts_oscin" },
.num_parents = 1,
},
};
static struct clk_regmap g12a_aoclk_32k_by_oscin_div = {
.data = &(struct meson_clk_dualdiv_data){
.n1 = {
.reg_off = AO_RTC_ALT_CLK_CNTL0,
.shift = 0,
.width = 12,
},
.n2 = {
.reg_off = AO_RTC_ALT_CLK_CNTL0,
.shift = 12,
.width = 12,
},
.m1 = {
.reg_off = AO_RTC_ALT_CLK_CNTL1,
.shift = 0,
.width = 12,
},
.m2 = {
.reg_off = AO_RTC_ALT_CLK_CNTL1,
.shift = 12,
.width = 12,
},
.dual = {
.reg_off = AO_RTC_ALT_CLK_CNTL0,
.shift = 28,
.width = 1,
},
.table = g12a_32k_div_table,
},
.hw.init = &(struct clk_init_data){
.name = "g12a_ao_32k_by_oscin_div",
.ops = &meson_clk_dualdiv_ops,
.parent_names = (const char *[]){ "g12a_ao_32k_by_oscin_pre" },
.num_parents = 1,
},
};
static struct clk_regmap g12a_aoclk_32k_by_oscin_sel = {
.data = &(struct clk_regmap_mux_data) {
.offset = AO_RTC_ALT_CLK_CNTL1,
.mask = 0x1,
.shift = 24,
.flags = CLK_MUX_ROUND_CLOSEST,
},
.hw.init = &(struct clk_init_data){
.name = "g12a_ao_32k_by_oscin_sel",
.ops = &clk_regmap_mux_ops,
.parent_names = (const char *[]){ "g12a_ao_32k_by_oscin_div",
"g12a_ao_32k_by_oscin_pre" },
.num_parents = 2,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_regmap g12a_aoclk_32k_by_oscin = {
.data = &(struct clk_regmap_gate_data){
.offset = AO_RTC_ALT_CLK_CNTL0,
.bit_idx = 30,
},
.hw.init = &(struct clk_init_data){
.name = "g12a_ao_32k_by_oscin",
.ops = &clk_regmap_gate_ops,
.parent_names = (const char *[]){ "g12a_ao_32k_by_oscin_sel" },
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
/* cec clock */
static struct clk_regmap g12a_aoclk_cec_pre = {
.data = &(struct clk_regmap_gate_data){
.offset = AO_CEC_CLK_CNTL_REG0,
.bit_idx = 31,
},
.hw.init = &(struct clk_init_data){
.name = "g12a_ao_cec_pre",
.ops = &clk_regmap_gate_ops,
.parent_names = (const char *[]){ "cts_oscin" },
.num_parents = 1,
},
};
static struct clk_regmap g12a_aoclk_cec_div = {
.data = &(struct meson_clk_dualdiv_data){
.n1 = {
.reg_off = AO_CEC_CLK_CNTL_REG0,
.shift = 0,
.width = 12,
},
.n2 = {
.reg_off = AO_CEC_CLK_CNTL_REG0,
.shift = 12,
.width = 12,
},
.m1 = {
.reg_off = AO_CEC_CLK_CNTL_REG1,
.shift = 0,
.width = 12,
},
.m2 = {
.reg_off = AO_CEC_CLK_CNTL_REG1,
.shift = 12,
.width = 12,
},
.dual = {
.reg_off = AO_CEC_CLK_CNTL_REG0,
.shift = 28,
.width = 1,
},
.table = g12a_32k_div_table,
},
.hw.init = &(struct clk_init_data){
.name = "g12a_ao_cec_div",
.ops = &meson_clk_dualdiv_ops,
.parent_names = (const char *[]){ "g12a_ao_cec_pre" },
.num_parents = 1,
},
};
static struct clk_regmap g12a_aoclk_cec_sel = {
.data = &(struct clk_regmap_mux_data) {
.offset = AO_CEC_CLK_CNTL_REG1,
.mask = 0x1,
.shift = 24,
.flags = CLK_MUX_ROUND_CLOSEST,
},
.hw.init = &(struct clk_init_data){
.name = "g12a_ao_cec_sel",
.ops = &clk_regmap_mux_ops,
.parent_names = (const char *[]){ "g12a_ao_cec_div",
"g12a_ao_cec_pre" },
.num_parents = 2,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_regmap g12a_aoclk_cec = {
.data = &(struct clk_regmap_gate_data){
.offset = AO_CEC_CLK_CNTL_REG0,
.bit_idx = 30,
},
.hw.init = &(struct clk_init_data){
.name = "g12a_ao_cec",
.ops = &clk_regmap_gate_ops,
.parent_names = (const char *[]){ "g12a_ao_cec_sel" },
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_regmap g12a_aoclk_cts_rtc_oscin = {
.data = &(struct clk_regmap_mux_data) {
.offset = AO_RTI_PWR_CNTL_REG0,
.mask = 0x1,
.shift = 10,
.flags = CLK_MUX_ROUND_CLOSEST,
},
.hw.init = &(struct clk_init_data){
.name = "g12a_ao_cts_rtc_oscin",
.ops = &clk_regmap_mux_ops,
.parent_names = (const char *[]){ "g12a_ao_32k_by_oscin",
IN_PREFIX "ext_32k-0" },
.num_parents = 2,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_regmap g12a_aoclk_clk81 = {
.data = &(struct clk_regmap_mux_data) {
.offset = AO_RTI_PWR_CNTL_REG0,
.mask = 0x1,
.shift = 8,
.flags = CLK_MUX_ROUND_CLOSEST,
},
.hw.init = &(struct clk_init_data){
.name = "g12a_ao_clk81",
.ops = &clk_regmap_mux_ro_ops,
.parent_names = (const char *[]){ IN_PREFIX "mpeg-clk",
"g12a_ao_cts_rtc_oscin"},
.num_parents = 2,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_regmap g12a_aoclk_saradc_mux = {
.data = &(struct clk_regmap_mux_data) {
.offset = AO_SAR_CLK,
.mask = 0x3,
.shift = 9,
},
.hw.init = &(struct clk_init_data){
.name = "g12a_ao_saradc_mux",
.ops = &clk_regmap_mux_ops,
.parent_names = (const char *[]){ IN_PREFIX "xtal",
"g12a_ao_clk81" },
.num_parents = 2,
},
};
static struct clk_regmap g12a_aoclk_saradc_div = {
.data = &(struct clk_regmap_div_data) {
.offset = AO_SAR_CLK,
.shift = 0,
.width = 8,
},
.hw.init = &(struct clk_init_data){
.name = "g12a_ao_saradc_div",
.ops = &clk_regmap_divider_ops,
.parent_names = (const char *[]){ "g12a_ao_saradc_mux" },
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_regmap g12a_aoclk_saradc_gate = {
.data = &(struct clk_regmap_gate_data) {
.offset = AO_SAR_CLK,
.bit_idx = 8,
},
.hw.init = &(struct clk_init_data){
.name = "g12a_ao_saradc_gate",
.ops = &clk_regmap_gate_ops,
.parent_names = (const char *[]){ "g12a_ao_saradc_div" },
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
static const unsigned int g12a_aoclk_reset[] = {
[RESET_AO_IR_IN] = 16,
[RESET_AO_UART] = 17,
[RESET_AO_I2C_M] = 18,
[RESET_AO_I2C_S] = 19,
[RESET_AO_SAR_ADC] = 20,
[RESET_AO_UART2] = 22,
[RESET_AO_IR_OUT] = 23,
};
static struct clk_regmap *g12a_aoclk_regmap[] = {
&g12a_aoclk_ahb,
&g12a_aoclk_ir_in,
&g12a_aoclk_i2c_m0,
&g12a_aoclk_i2c_s0,
&g12a_aoclk_uart,
&g12a_aoclk_prod_i2c,
&g12a_aoclk_uart2,
&g12a_aoclk_ir_out,
&g12a_aoclk_saradc,
&g12a_aoclk_mailbox,
&g12a_aoclk_m3,
&g12a_aoclk_ahb_sram,
&g12a_aoclk_rti,
&g12a_aoclk_m4_fclk,
&g12a_aoclk_m4_hclk,
&g12a_aoclk_cts_oscin,
&g12a_aoclk_32k_by_oscin_pre,
&g12a_aoclk_32k_by_oscin_div,
&g12a_aoclk_32k_by_oscin_sel,
&g12a_aoclk_32k_by_oscin,
&g12a_aoclk_cec_pre,
&g12a_aoclk_cec_div,
&g12a_aoclk_cec_sel,
&g12a_aoclk_cec,
&g12a_aoclk_cts_rtc_oscin,
&g12a_aoclk_clk81,
&g12a_aoclk_saradc_mux,
&g12a_aoclk_saradc_div,
&g12a_aoclk_saradc_gate,
};
static const struct clk_hw_onecell_data g12a_aoclk_onecell_data = {
.hws = {
[CLKID_AO_AHB] = &g12a_aoclk_ahb.hw,
[CLKID_AO_IR_IN] = &g12a_aoclk_ir_in.hw,
[CLKID_AO_I2C_M0] = &g12a_aoclk_i2c_m0.hw,
[CLKID_AO_I2C_S0] = &g12a_aoclk_i2c_s0.hw,
[CLKID_AO_UART] = &g12a_aoclk_uart.hw,
[CLKID_AO_PROD_I2C] = &g12a_aoclk_prod_i2c.hw,
[CLKID_AO_UART2] = &g12a_aoclk_uart2.hw,
[CLKID_AO_IR_OUT] = &g12a_aoclk_ir_out.hw,
[CLKID_AO_SAR_ADC] = &g12a_aoclk_saradc.hw,
[CLKID_AO_MAILBOX] = &g12a_aoclk_mailbox.hw,
[CLKID_AO_M3] = &g12a_aoclk_m3.hw,
[CLKID_AO_AHB_SRAM] = &g12a_aoclk_ahb_sram.hw,
[CLKID_AO_RTI] = &g12a_aoclk_rti.hw,
[CLKID_AO_M4_FCLK] = &g12a_aoclk_m4_fclk.hw,
[CLKID_AO_M4_HCLK] = &g12a_aoclk_m4_hclk.hw,
[CLKID_AO_CLK81] = &g12a_aoclk_clk81.hw,
[CLKID_AO_SAR_ADC_SEL] = &g12a_aoclk_saradc_mux.hw,
[CLKID_AO_SAR_ADC_DIV] = &g12a_aoclk_saradc_div.hw,
[CLKID_AO_SAR_ADC_CLK] = &g12a_aoclk_saradc_gate.hw,
[CLKID_AO_CTS_OSCIN] = &g12a_aoclk_cts_oscin.hw,
[CLKID_AO_32K_PRE] = &g12a_aoclk_32k_by_oscin_pre.hw,
[CLKID_AO_32K_DIV] = &g12a_aoclk_32k_by_oscin_div.hw,
[CLKID_AO_32K_SEL] = &g12a_aoclk_32k_by_oscin_sel.hw,
[CLKID_AO_32K] = &g12a_aoclk_32k_by_oscin.hw,
[CLKID_AO_CEC_PRE] = &g12a_aoclk_cec_pre.hw,
[CLKID_AO_CEC_DIV] = &g12a_aoclk_cec_div.hw,
[CLKID_AO_CEC_SEL] = &g12a_aoclk_cec_sel.hw,
[CLKID_AO_CEC] = &g12a_aoclk_cec.hw,
[CLKID_AO_CTS_RTC_OSCIN] = &g12a_aoclk_cts_rtc_oscin.hw,
},
.num = NR_CLKS,
};
static const struct meson_aoclk_input g12a_aoclk_inputs[] = {
{ .name = "xtal", .required = true },
{ .name = "mpeg-clk", .required = true },
{ .name = "ext-32k-0", .required = false },
};
static const struct meson_aoclk_data g12a_aoclkc_data = {
.reset_reg = AO_RTI_GEN_CNTL_REG0,
.num_reset = ARRAY_SIZE(g12a_aoclk_reset),
.reset = g12a_aoclk_reset,
.num_clks = ARRAY_SIZE(g12a_aoclk_regmap),
.clks = g12a_aoclk_regmap,
.hw_data = &g12a_aoclk_onecell_data,
.inputs = g12a_aoclk_inputs,
.num_inputs = ARRAY_SIZE(g12a_aoclk_inputs),
.input_prefix = IN_PREFIX,
};
static const struct of_device_id g12a_aoclkc_match_table[] = {
{
.compatible = "amlogic,meson-g12a-aoclkc",
.data = &g12a_aoclkc_data,
},
{ }
};
static struct platform_driver g12a_aoclkc_driver = {
.probe = meson_aoclkc_probe,
.driver = {
.name = "g12a-aoclkc",
.of_match_table = g12a_aoclkc_match_table,
},
};
builtin_platform_driver(g12a_aoclkc_driver);
|