1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
|
/*
* Copyright 2001, 2002, 2003 MontaVista Software Inc.
* Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
* Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
*
* Common time service routines for MIPS machines. See
* Documents/MIPS/README.txt.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/param.h>
#include <linux/time.h>
#include <linux/timer.h>
#include <linux/smp.h>
#include <linux/kernel_stat.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <asm/bootinfo.h>
#include <asm/cpu.h>
#include <asm/time.h>
#include <asm/hardirq.h>
#include <asm/div64.h>
#include <asm/debug.h>
#include <int.h>
#include <cm.h>
static unsigned long cpj;
static cycle_t hpt_read(struct clocksource *cs)
{
return read_c0_count2();
}
static struct clocksource pnx_clocksource = {
.name = "pnx8xxx",
.rating = 200,
.read = hpt_read,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
static irqreturn_t pnx8xxx_timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *c = dev_id;
/* clear MATCH, signal the event */
c->event_handler(c);
return IRQ_HANDLED;
}
static struct irqaction pnx8xxx_timer_irq = {
.handler = pnx8xxx_timer_interrupt,
.flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER,
.name = "pnx8xxx_timer",
};
static irqreturn_t monotonic_interrupt(int irq, void *dev_id)
{
/* Timer 2 clear interrupt */
write_c0_compare2(-1);
return IRQ_HANDLED;
}
static struct irqaction monotonic_irqaction = {
.handler = monotonic_interrupt,
.flags = IRQF_DISABLED,
.name = "Monotonic timer",
};
static int pnx8xxx_set_next_event(unsigned long delta,
struct clock_event_device *evt)
{
write_c0_compare(delta);
return 0;
}
static struct clock_event_device pnx8xxx_clockevent = {
.name = "pnx8xxx_clockevent",
.features = CLOCK_EVT_FEAT_ONESHOT,
.set_next_event = pnx8xxx_set_next_event,
};
static inline void timer_ack(void)
{
write_c0_compare(cpj);
}
__init void plat_time_init(void)
{
unsigned int configPR;
unsigned int n;
unsigned int m;
unsigned int p;
unsigned int pow2p;
pnx8xxx_clockevent.cpumask = cpu_none_mask;
clockevents_register_device(&pnx8xxx_clockevent);
clocksource_register(&pnx_clocksource);
/* Timer 1 start */
configPR = read_c0_config7();
configPR &= ~0x00000008;
write_c0_config7(configPR);
/* Timer 2 start */
configPR = read_c0_config7();
configPR &= ~0x00000010;
write_c0_config7(configPR);
/* Timer 3 stop */
configPR = read_c0_config7();
configPR |= 0x00000020;
write_c0_config7(configPR);
/* PLL0 sets MIPS clock (PLL1 <=> TM1, PLL6 <=> TM2, PLL5 <=> mem) */
/* (but only if CLK_MIPS_CTL select value [bits 3:1] is 1: FIXME) */
n = (PNX8550_CM_PLL0_CTL & PNX8550_CM_PLL_N_MASK) >> 16;
m = (PNX8550_CM_PLL0_CTL & PNX8550_CM_PLL_M_MASK) >> 8;
p = (PNX8550_CM_PLL0_CTL & PNX8550_CM_PLL_P_MASK) >> 2;
pow2p = (1 << p);
db_assert(m != 0 && pow2p != 0);
/*
* Compute the frequency as in the PNX8550 User Manual 1.0, p.186
* (a.k.a. 8-10). Divide by HZ for a timer offset that results in
* HZ timer interrupts per second.
*/
mips_hpt_frequency = 27UL * ((1000000UL * n)/(m * pow2p));
cpj = DIV_ROUND_CLOSEST(mips_hpt_frequency, HZ);
write_c0_count(0);
timer_ack();
/* Setup Timer 2 */
write_c0_count2(0);
write_c0_compare2(0xffffffff);
setup_irq(PNX8550_INT_TIMER1, &pnx8xxx_timer_irq);
setup_irq(PNX8550_INT_TIMER2, &monotonic_irqaction);
}
|
