1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
|
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* This file configures the internal USB PHY in OMAP4430. Used
* with TWL6030 transceiver and MUSB on OMAP4430.
*
* Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
* Author: Hema HK <hemahk@ti.com>
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/err.h>
#include <linux/usb.h>
#include <linux/usb/musb.h>
#include "soc.h"
#include "control.h"
#include "usb.h"
#define CONTROL_DEV_CONF 0x300
#define PHY_PD 0x1
/**
* omap4430_phy_power_down: disable MUSB PHY during early init
*
* OMAP4 MUSB PHY module is enabled by default on reset, but this will
* prevent core retention if not disabled by SW. USB driver will
* later on enable this, once and if the driver needs it.
*/
static int __init omap4430_phy_power_down(void)
{
void __iomem *ctrl_base;
if (!cpu_is_omap44xx())
return 0;
ctrl_base = ioremap(OMAP443X_SCM_BASE, SZ_1K);
if (!ctrl_base) {
pr_err("control module ioremap failed\n");
return -ENOMEM;
}
/* Power down the phy */
writel_relaxed(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
iounmap(ctrl_base);
return 0;
}
omap_early_initcall(omap4430_phy_power_down);
void am35x_musb_reset(void)
{
u32 regval;
/* Reset the musb interface */
regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
regval |= AM35XX_USBOTGSS_SW_RST;
omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
regval &= ~AM35XX_USBOTGSS_SW_RST;
omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
}
void am35x_musb_phy_power(u8 on)
{
unsigned long timeout = jiffies + msecs_to_jiffies(100);
u32 devconf2;
if (on) {
/*
* Start the on-chip PHY and its PLL.
*/
devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
devconf2 &= ~(CONF2_RESET | CONF2_PHYPWRDN | CONF2_OTGPWRDN);
devconf2 |= CONF2_PHY_PLLON;
omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
pr_info("Waiting for PHY clock good...\n");
while (!(omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2)
& CONF2_PHYCLKGD)) {
cpu_relax();
if (time_after(jiffies, timeout)) {
pr_err("musb PHY clock good timed out\n");
break;
}
}
} else {
/*
* Power down the on-chip PHY.
*/
devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
devconf2 &= ~CONF2_PHY_PLLON;
devconf2 |= CONF2_PHYPWRDN | CONF2_OTGPWRDN;
omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
}
}
void am35x_musb_clear_irq(void)
{
u32 regval;
regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
regval |= AM35XX_USBOTGSS_INT_CLR;
omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
}
void am35x_set_mode(u8 musb_mode)
{
u32 devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
devconf2 &= ~CONF2_OTGMODE;
switch (musb_mode) {
case MUSB_HOST: /* Force VBUS valid, ID = 0 */
devconf2 |= CONF2_FORCE_HOST;
break;
case MUSB_PERIPHERAL: /* Force VBUS valid, ID = 1 */
devconf2 |= CONF2_FORCE_DEVICE;
break;
case MUSB_OTG: /* Don't override the VBUS/ID comparators */
devconf2 |= CONF2_NO_OVERRIDE;
break;
default:
pr_info("Unsupported mode %u\n", musb_mode);
}
omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
}
|
