summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/omap4-droid4-xt894.dts
blob: e7c3c563ff8f5d05bb022ed1c3be513f2e97ff66 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
/*
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
/dts-v1/;

#include <dt-bindings/input/input.h>
#include "omap443x.dtsi"
#include "motorola-cpcap-mapphone.dtsi"

/ {
	model = "Motorola Droid 4 XT894";
	compatible = "motorola,droid4", "ti,omap4430", "ti,omap4";

	chosen {
		stdout-path = &uart3;
	};

	aliases {
		display0 = &lcd0;
		display1 = &hdmi0;
	};

	/*
	 * We seem to have only 1021 MB accessible, 1021 - 1022 is locked,
	 * then 1023 - 1024 seems to contain mbm.
	 */
	memory {
		device_type = "memory";
		reg = <0x80000000 0x3fd00000>;	/* 1021 MB */
	};

	/* Poweroff GPIO probably connected to CPCAP */
	gpio-poweroff {
		compatible = "gpio-poweroff";
		pinctrl-0 = <&poweroff_gpio>;
		pinctrl-names = "default";
		gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;	/* gpio50 */
	};

	hdmi0: connector {
		compatible = "hdmi-connector";
		pinctrl-0 = <&hdmi_hpd_gpio>;
		pinctrl-names = "default";
		label = "hdmi";
		type = "d";

		hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;	/* gpio63 */

		port {
			hdmi_connector_in: endpoint {
				remote-endpoint = <&hdmi_out>;
			};
		};
	};

	/*
	 * HDMI 5V regulator probably sourced from battery. Let's keep
	 * keep this as always enabled for HDMI to work until we've
	 * figured what the encoder chip is.
	 */
	hdmi_regulator: regulator-hdmi {
		compatible = "regulator-fixed";
		regulator-name = "hdmi";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		gpio = <&gpio2 27 GPIO_ACTIVE_HIGH>;	/* gpio59 */
		enable-active-high;
		regulator-always-on;
	};

	/* FS USB Host PHY on port 1 for mdm6600 */
	fsusb1_phy: usb-phy@1 {
		compatible = "motorola,mapphone-mdm6600";
		pinctrl-0 = <&usb_mdm6600_pins>;
		pinctrl-names = "default";
		enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;     /* gpio_95 */
		power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;	/* gpio_54 */
		reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;	/* gpio_49 */
		/* mode: gpio_148 gpio_149 */
		motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>,
				      <&gpio5 21 GPIO_ACTIVE_HIGH>;
		/* cmd: gpio_103 gpio_104 gpio_142 */
		motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>,
				     <&gpio4 8 GPIO_ACTIVE_HIGH>,
				     <&gpio5 14 GPIO_ACTIVE_HIGH>;
		/* status: gpio_52 gpio_53 gpio_55 */
		motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>,
					<&gpio2 21 GPIO_ACTIVE_HIGH>,
					<&gpio2 23 GPIO_ACTIVE_HIGH>;
		#phy-cells = <0>;
	};

	/* HS USB host TLL nop-phy on port 2 for w3glte */
	hsusb2_phy: usb-phy@2 {
		compatible = "usb-nop-xceiv";
		#phy-cells = <0>;
	};

	/* LCD regulator from sw5 source */
	lcd_regulator: regulator-lcd {
		compatible = "regulator-fixed";
		regulator-name = "lcd";
		regulator-min-microvolt = <5050000>;
		regulator-max-microvolt = <5050000>;
		gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;	/* gpio96 */
		enable-active-high;
		vin-supply = <&sw5>;
	};

	/* This is probably coming straight from the battery.. */
	wl12xx_vmmc: regulator-wl12xx {
		compatible = "regulator-fixed";
		regulator-name = "vwl1271";
		regulator-min-microvolt = <1650000>;
		regulator-max-microvolt = <1650000>;
		gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;	/* gpio94 */
		startup-delay-us = <70000>;
		enable-active-high;
	};

	gpio_keys {
		compatible = "gpio-keys";

		volume_down {
			label = "Volume Down";
			gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; /* gpio154 */
			linux,code = <KEY_VOLUMEDOWN>;
			linux,can-disable;
		};

		slider {
			label = "Keypad Slide";
			gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio122 */
			linux,input-type = <EV_SW>;
			linux,code = <SW_KEYPAD_SLIDE>;
			linux,can-disable;

		};
	};

	soundcard {
		compatible = "audio-graph-card";
		label = "Droid 4 Audio";

		simple-graph-card,widgets =
			"Speaker", "Earpiece",
			"Speaker", "Loudspeaker",
			"Headphone", "Headphone Jack",
			"Microphone", "Internal Mic";

		simple-graph-card,routing =
			"Earpiece", "EP",
			"Loudspeaker", "SPKR",
			"Headphone Jack", "HSL",
			"Headphone Jack", "HSR",
			"MICR", "Internal Mic";

		dais = <&mcbsp2_port>, <&mcbsp3_port>;
	};

	pwm8: dmtimer-pwm-8 {
		pinctrl-names = "default";
		pinctrl-0 = <&vibrator_direction_pin>;

		compatible = "ti,omap-dmtimer-pwm";
		#pwm-cells = <3>;
		ti,timers = <&timer8>;
		ti,clock-source = <0x01>;
	};

	pwm9: dmtimer-pwm-9 {
		pinctrl-names = "default";
		pinctrl-0 = <&vibrator_enable_pin>;

		compatible = "ti,omap-dmtimer-pwm";
		#pwm-cells = <3>;
		ti,timers = <&timer9>;
		ti,clock-source = <0x01>;
	};

	vibrator {
		compatible = "pwm-vibrator";
		pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>;
		pwm-names = "enable", "direction";
		direction-duty-cycle-ns = <10000000>;
	};
};

&dss {
	status = "okay";
};

&dsi1 {
	status = "okay";
	vdd-supply = <&vcsi>;

	port {
		dsi1_out_ep: endpoint {
			remote-endpoint = <&lcd0_in>;
			lanes = <0 1 2 3 4 5>;
		};
	};

	lcd0: display {
		compatible = "panel-dsi-cm";
		label = "lcd0";
		vddi-supply = <&lcd_regulator>;
		reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;	/* gpio101 */

		width-mm = <50>;
		height-mm = <89>;
		backlight = <&lcd_backlight>;

		panel-timing {
			clock-frequency = <0>;		/* Calculated by dsi */

			hback-porch = <2>;
			hactive = <540>;
			hfront-porch = <0>;
			hsync-len = <2>;

			vback-porch = <1>;
			vactive = <960>;
			vfront-porch = <0>;
			vsync-len = <1>;

			hsync-active = <0>;
			vsync-active = <0>;
			de-active = <1>;
			pixelclk-active = <1>;
		};

		port {
			lcd0_in: endpoint {
				remote-endpoint = <&dsi1_out_ep>;
			};
		};
	};
};

&hdmi {
	status = "okay";
	pinctrl-0 = <&dss_hdmi_pins>;
	pinctrl-names = "default";
	vdda-supply = <&vdac>;

	port {
		hdmi_out: endpoint {
			remote-endpoint = <&hdmi_connector_in>;
			lanes = <1 0 3 2 5 4 7 6>;
		};
	};
};

&i2c1 {
	tmp105@48 {
		compatible = "ti,tmp105";
		reg = <0x48>;
		pinctrl-0 = <&tmp105_irq>;
		pinctrl-names = "default";
		/* kpd_row0.gpio_178 */
		interrupts-extended = <&gpio6 18 IRQ_TYPE_EDGE_FALLING
				       &omap4_pmx_core 0x14e>;
		interrupt-names = "irq", "wakeup";
		wakeup-source;
	};
};

&keypad {
	keypad,num-rows = <8>;
	keypad,num-columns = <8>;
	linux,keymap = <

	/* Row 1 */
	MATRIX_KEY(0, 2, KEY_1)
	MATRIX_KEY(0, 6, KEY_2)
	MATRIX_KEY(2, 3, KEY_3)
	MATRIX_KEY(0, 7, KEY_4)
	MATRIX_KEY(0, 4, KEY_5)
	MATRIX_KEY(5, 5, KEY_6)
	MATRIX_KEY(0, 1, KEY_7)
	MATRIX_KEY(0, 5, KEY_8)
	MATRIX_KEY(0, 0, KEY_9)
	MATRIX_KEY(1, 6, KEY_0)

	/* Row 2 */
	MATRIX_KEY(3, 4, KEY_APOSTROPHE)
	MATRIX_KEY(7, 6, KEY_Q)
	MATRIX_KEY(7, 7, KEY_W)
	MATRIX_KEY(7, 2, KEY_E)
	MATRIX_KEY(1, 0, KEY_R)
	MATRIX_KEY(4, 4, KEY_T)
	MATRIX_KEY(1, 2, KEY_Y)
	MATRIX_KEY(6, 7, KEY_U)
	MATRIX_KEY(2, 2, KEY_I)
	MATRIX_KEY(5, 6, KEY_O)
	MATRIX_KEY(3, 7, KEY_P)
	MATRIX_KEY(6, 5, KEY_BACKSPACE)

	/* Row 3 */
	MATRIX_KEY(5, 4, KEY_TAB)
	MATRIX_KEY(5, 7, KEY_A)
	MATRIX_KEY(2, 7, KEY_S)
	MATRIX_KEY(7, 0, KEY_D)
	MATRIX_KEY(2, 6, KEY_F)
	MATRIX_KEY(6, 2, KEY_G)
	MATRIX_KEY(6, 6, KEY_H)
	MATRIX_KEY(1, 4, KEY_J)
	MATRIX_KEY(3, 1, KEY_K)
	MATRIX_KEY(2, 1, KEY_L)
	MATRIX_KEY(4, 6, KEY_ENTER)

	/* Row 4 */
	MATRIX_KEY(3, 6, KEY_LEFTSHIFT)		/* KEY_CAPSLOCK */
	MATRIX_KEY(6, 1, KEY_Z)
	MATRIX_KEY(7, 4, KEY_X)
	MATRIX_KEY(5, 1, KEY_C)
	MATRIX_KEY(1, 7, KEY_V)
	MATRIX_KEY(2, 4, KEY_B)
	MATRIX_KEY(4, 1, KEY_N)
	MATRIX_KEY(1, 1, KEY_M)
	MATRIX_KEY(3, 5, KEY_COMMA)
	MATRIX_KEY(5, 2, KEY_DOT)
	MATRIX_KEY(6, 3, KEY_UP)
	MATRIX_KEY(7, 3, KEY_OK)

	/* Row 5 */
	MATRIX_KEY(2, 5, KEY_LEFTCTRL)		/* KEY_LEFTSHIFT */
	MATRIX_KEY(4, 5, KEY_LEFTALT)		/* SYM */
	MATRIX_KEY(6, 0, KEY_MINUS)
	MATRIX_KEY(4, 7, KEY_EQUAL)
	MATRIX_KEY(1, 5, KEY_SPACE)
	MATRIX_KEY(3, 2, KEY_SLASH)
	MATRIX_KEY(4, 3, KEY_LEFT)
	MATRIX_KEY(5, 3, KEY_DOWN)
	MATRIX_KEY(3, 3, KEY_RIGHT)

	/* Side buttons, KEY_VOLUMEDOWN and KEY_PWER are on CPCAP? */
	MATRIX_KEY(5, 0, KEY_VOLUMEUP)
	>;
};

&mmc1 {
	vmmc-supply = <&vwlan2>;
	bus-width = <4>;
	cd-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;	/* gpio176 */
};

&mmc2 {
	vmmc-supply = <&vsdio>;
	bus-width = <8>;
	non-removable;
};

&mmc3 {
	vmmc-supply = <&wl12xx_vmmc>;
	interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
			       &omap4_pmx_core 0xde>;

	non-removable;
	bus-width = <4>;
	cap-power-off-card;

	#address-cells = <1>;
	#size-cells = <0>;
	wlcore: wlcore@2 {
		compatible = "ti,wl1285", "ti,wl1283";
		reg = <2>;
		interrupt-parent = <&gpio4>;
		interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; /* gpio100 */
		ref-clock-frequency = <26000000>;
		tcxo-clock-frequency = <26000000>;
	};
};

&i2c1 {
	lm3532@38 {
		compatible = "ti,lm3532";
		reg = <0x38>;

		enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;

		lcd_backlight: backlight {
			compatible = "ti,lm3532-backlight";

			lcd {
				led-sources = <0 1 2>;
				ramp-up-msec = <1>;
				ramp-down-msec = <0>;
			};
		};
	};
};

&i2c2 {
	touchscreen@4a {
		compatible = "atmel,maxtouch";
		reg = <0x4a>;
		pinctrl-names = "default";
		pinctrl-0 = <&touchscreen_pins>;

		reset-gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; /* gpio173 */

		/* gpio_183 with sys_nirq2 pad as wakeup */
		interrupts-extended = <&gpio6 23 IRQ_TYPE_EDGE_FALLING>,
				      <&omap4_pmx_core 0x160>;
		interrupt-names = "irq", "wakeup";
		wakeup-source;
	};

	isl29030@44 {
		compatible = "isil,isl29030";
		reg = <0x44>;

		pinctrl-names = "default";
		pinctrl-0 = <&als_proximity_pins>;

		interrupt-parent = <&gpio6>;
		interrupts = <17 IRQ_TYPE_LEVEL_LOW>; /* gpio177 */
	};
};

&omap4_pmx_core {

	/* hdmi_hpd.gpio_63 */
	hdmi_hpd_gpio: pinmux_hdmi_hpd_pins {
		pinctrl-single,pins = <
		OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3)
		>;
	};

	/* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */
	dss_hdmi_pins: pinmux_dss_hdmi_pins {
		pinctrl-single,pins = <
		OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)
		OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)
		OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)
		>;
	};

	/* gpmc_ncs0.gpio_50 */
	poweroff_gpio: pinmux_poweroff_pins {
		pinctrl-single,pins = <
		OMAP4_IOPAD(0x074, PIN_OUTPUT_PULLUP | MUX_MODE3)
		>;
	};

	/* kpd_row0.gpio_178 */
	tmp105_irq: pinmux_tmp105_irq {
		pinctrl-single,pins = <
		OMAP4_IOPAD(0x18e, PIN_INPUT_PULLUP | MUX_MODE3)
		>;
	};

	usb_gpio_mux_sel1: pinmux_usb_gpio_mux_sel1_pins {
		/* gpio_60 */
		pinctrl-single,pins = <
		OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3)
		>;
	};

	touchscreen_pins: pinmux_touchscreen_pins {
		pinctrl-single,pins = <
		OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3)
		OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3)
		>;
	};

	als_proximity_pins: pinmux_als_proximity_pins {
		pinctrl-single,pins = <
		OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3)
		>;
	};

	usb_mdm6600_pins: pinmux_usb_mdm6600_pins {
		pinctrl-single,pins = <
		/* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */
		OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)

		/* power 0x4a10007c gpmc_nwp.gpio_54 c25 */
		OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)

		/* reset 0x4a100072 gpmc_a25.gpio_49 d20 */
		OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3)

		/* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */
		OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)

		/* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */
		OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)

		/* status0 0x4a10007e gpmc_clk.gpio_55 b22 */
		OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)

		/* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */
		OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)

		/* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */
		OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)

		/* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */
		OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)

		/* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */
		OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)

		/* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */
		OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
		>;
	};

	usb_ulpi_pins: pinmux_usb_ulpi_pins {
		pinctrl-single,pins = <
		OMAP4_IOPAD(0x196, MUX_MODE7)
		OMAP4_IOPAD(0x198, MUX_MODE7)
		OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE0)
		OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0)
		OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE0)
		OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE0)
		OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE0)
		OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE0)
		OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE0)
		OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE0)
		OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE0)
		OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE0)
		OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE0)
		OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE0)
		>;
	};

	/* usb0_otg_dp and usb0_otg_dm */
	usb_utmi_pins: pinmux_usb_utmi_pins {
		pinctrl-single,pins = <
		OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0)
		OMAP4_IOPAD(0x198, PIN_INPUT | MUX_MODE0)
		OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7)
		OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7)
		OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7)
		OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7)
		OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE7)
		OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE7)
		OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7)
		OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7)
		OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7)
		OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7)
		OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7)
		OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7)
		>;
	};

	/*
	 * Note that the v3.0.8 stock userspace dynamically remuxes uart1
	 * rts pin probably for PM purposes to PIN_INPUT_PULLUP | MUX_MODE7
	 * when not used. If needed, we can add rts pin remux later based
	 * on power measurements.
	 */
	uart1_pins: pinmux_uart1_pins {
		pinctrl-single,pins = <
		/* 0x4a10013c mcspi1_cs2.uart1_cts ag23 */
		OMAP4_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE1)

		/* 0x4a10013e mcspi1_cs3.uart1_rts ah23 */
		OMAP4_IOPAD(0x13e, MUX_MODE1)

		/* 0x4a100140 uart3_cts_rctx.uart1_tx f27 */
		OMAP4_IOPAD(0x140, PIN_OUTPUT | MUX_MODE1)

		/* 0x4a1001ca dpm_emu14.uart1_rx aa3 */
		OMAP4_IOPAD(0x1ca, PIN_INPUT_PULLUP | MUX_MODE2)
		>;
	};

	/* uart3_tx_irtx and uart3_rx_irrx */
	uart3_pins: pinmux_uart3_pins {
		pinctrl-single,pins = <
		OMAP4_IOPAD(0x196, MUX_MODE7)
		OMAP4_IOPAD(0x198, MUX_MODE7)
		OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7)
		OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7)
		OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7)
		OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7)
		OMAP4_IOPAD(0x1ba, MUX_MODE2)
		OMAP4_IOPAD(0x1bc, PIN_INPUT | MUX_MODE2)
		OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7)
		OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7)
		OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7)
		OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7)
		OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7)
		OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7)
		>;
	};

	uart4_pins: pinmux_uart4_pins {
		pinctrl-single,pins = <
		OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0)		/* uart4_rx */
		OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0)		/* uart4_tx */
		OMAP4_IOPAD(0x110, PIN_INPUT_PULLUP | MUX_MODE5)	/* uart4_cts */
		OMAP4_IOPAD(0x112, PIN_OUTPUT_PULLUP | MUX_MODE5)	/* uart4_rts */
		>;
	};

	mcbsp2_pins: pinmux_mcbsp2_pins {
		pinctrl-single,pins = <
		OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0)	/* abe_mcbsp2_clkx */
		OMAP4_IOPAD(0x0f8, PIN_INPUT | MUX_MODE0)	/* abe_mcbsp2_dr */
		OMAP4_IOPAD(0x0fa, PIN_OUTPUT | MUX_MODE0)	/* abe_mcbsp2_dx */
		OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0)	/* abe_mcbsp2_fsx */
		>;
	};

	mcbsp3_pins: pinmux_mcbsp3_pins {
		pinctrl-single,pins = <
		OMAP4_IOPAD(0x106, PIN_INPUT | MUX_MODE1)	/* abe_mcbsp3_dr */
		OMAP4_IOPAD(0x108, PIN_OUTPUT | MUX_MODE1)	/* abe_mcbsp3_dx */
		OMAP4_IOPAD(0x10a, PIN_INPUT | MUX_MODE1)	/* abe_mcbsp3_clkx */
		OMAP4_IOPAD(0x10c, PIN_INPUT | MUX_MODE1)	/* abe_mcbsp3_fsx */
		>;
	};
};

&omap4_pmx_wkup {
	usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins {
		/* gpio_wk0 */
		pinctrl-single,pins = <
		OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
		>;
	};

	vibrator_direction_pin: pinmux_vibrator_direction_pin {
		pinctrl-single,pins = <
		OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1)	/* dmtimer8_pwm_evt (gpio_27) */
		>;
	};

	vibrator_enable_pin: pinmux_vibrator_enable_pin {
		pinctrl-single,pins = <
		OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1)	/* dmtimer9_pwm_evt (gpio_28) */
		>;
	};
};

/*
 * As uart1 is wired to mdm6600 with rts and cts, we can use the cts pin for
 * uart1 wakeirq.
 */
&uart1 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart1_pins>;
	interrupts-extended = <&wakeupgen GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH
			       &omap4_pmx_core 0xfc>;
};

&uart3 {
	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
			       &omap4_pmx_core 0x17c>;
};

&uart4 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart4_pins>;

	bluetooth {
		compatible = "ti,wl1285-st";
		enable-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>; /* gpio 174 */
		max-speed = <3686400>;
	};
};

&usbhsohci {
	phys = <&fsusb1_phy>;
	phy-names = "usb";
};

&usbhsehci {
	phys = <&hsusb2_phy>;
};

&usbhshost {
	port1-mode = "ohci-phy-4pin-dpdm";
	port2-mode = "ehci-tll";
};

/* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */
&usb_otg_hs {
	interface-type = <1>;
	mode = <3>;
	power = <50>;
};

&i2c4 {
	ak8975: magnetometer@c {
		compatible = "asahi-kasei,ak8975";
		reg = <0x0c>;

		vdd-supply = <&vhvio>;

		interrupt-parent = <&gpio6>;
		interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */

		rotation-matrix = "-1", "0", "0",
				  "0", "1", "0",
				  "0", "0", "-1";

	};

	lis3dh: accelerometer@18 {
		compatible = "st,lis3dh-accel";
		reg = <0x18>;

		vdd-supply = <&vhvio>;

		interrupt-parent = <&gpio2>;
		interrupts = <2 IRQ_TYPE_EDGE_BOTH>; /* gpio34 */

		rotation-matrix = "0", "-1", "0",
				  "1", "0", "0",
				  "0", "0", "1";
	};
};

&mcbsp2 {
	#sound-dai-cells = <0>;
	pinctrl-names = "default";
	pinctrl-0 = <&mcbsp2_pins>;
	status = "okay";

	mcbsp2_port: port {
		cpu_dai2: endpoint {
			dai-format = "i2s";
			remote-endpoint = <&cpcap_audio_codec0>;
			frame-master = <&cpcap_audio_codec0>;
			bitclock-master = <&cpcap_audio_codec0>;
		};
	};
};

&mcbsp3 {
	#sound-dai-cells = <0>;
	pinctrl-names = "default";
	pinctrl-0 = <&mcbsp3_pins>;
	status = "okay";

	mcbsp3_port: port {
		cpu_dai3: endpoint {
			dai-format = "dsp_a";
			frame-master = <&cpcap_audio_codec1>;
			bitclock-master = <&cpcap_audio_codec1>;
			remote-endpoint = <&cpcap_audio_codec1>;
		};
	};
};

&cpcap_audio_codec0 {
	remote-endpoint = <&cpu_dai2>;
};

&cpcap_audio_codec1 {
	remote-endpoint = <&cpu_dai3>;
};