1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
|
* sun6i Real Time Clock
RTC controller for the Allwinner A31
Required properties:
- compatible : Should be one of the following combinations:
- "allwinner,sun6i-a31-rtc"
- "allwinner,sun8i-a23-rtc"
- "allwinner,sun8i-h3-rtc"
- "allwinner,sun8i-r40-rtc", "allwinner,sun8i-h3-rtc"
- "allwinner,sun8i-v3-rtc"
- "allwinner,sun50i-a64-rtc", "allwinner,sun8i-h3-rtc"
- "allwinner,sun50i-h5-rtc"
Where there are two or more compatible strings, this
denotes the hardware covered by the most specific one
is backward-compatible with the latter ones, and the
implementation for the latter ones can be used, albeit
with reduced functionality.
- reg : physical base address of the controller and length of
memory mapped region.
- interrupts : IRQ lines for the RTC alarm 0 and alarm 1, in that order.
Required properties for new device trees
- clocks : phandle to the 32kHz external oscillator
- clock-output-names : names of up to three clock outputs. See below.
- #clock-cells : must be equal to 1.
The RTC provides the following clocks at the given indices:
- 0: LOSC
- 1: LOSC external output, known as X32KFOUT in the datasheet.
This clock is not available on the A31 and is deprecated for old
device trees still using the "allwinner,sun6i-a31-rtc" compatible.
- 2: InternalOSC, or internal RC oscillator (A64/H3/H5 only)
Example:
rtc: rtc@1f00000 {
compatible = "allwinner,sun6i-a31-rtc";
reg = <0x01f00000 0x400>;
interrupts = <0 40 4>, <0 41 4>;
clock-output-names = "osc32k";
clocks = <&ext_osc32k>;
#clock-cells = <1>;
};
|
