blob: eb35b22f9e230d10d791cab438d8eb36206265e4 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
|
Qualcomm RPM/RPMh Power domains
For RPM/RPMh Power domains, we communicate a performance state to RPM/RPMh
which then translates it into a corresponding voltage on a rail
Required Properties:
- compatible: Should be one of the following
* qcom,msm8996-rpmpd: RPM Power domain for the msm8996 family of SoC
* qcom,msm8998-rpmpd: RPM Power domain for the msm8998 family of SoC
* qcom,qcs404-rpmpd: RPM Power domain for the qcs404 family of SoC
* qcom,sdm845-rpmhpd: RPMh Power domain for the sdm845 family of SoC
- #power-domain-cells: number of cells in Power domain specifier
must be 1.
- operating-points-v2: Phandle to the OPP table for the Power domain.
Refer to Documentation/devicetree/bindings/power/power_domain.txt
and Documentation/devicetree/bindings/opp/opp.txt for more details
Refer to <dt-bindings/power/qcom-rpmpd.h> for the level values for
various OPPs for different platforms as well as Power domain indexes
Example: rpmh power domain controller and OPP table
#include <dt-bindings/power/qcom-rpmhpd.h>
opp-level values specified in the OPP tables for RPMh power domains
should use the RPMH_REGULATOR_LEVEL_* constants from
<dt-bindings/power/qcom-rpmhpd.h>
rpmhpd: power-controller {
compatible = "qcom,sdm845-rpmhpd";
#power-domain-cells = <1>;
operating-points-v2 = <&rpmhpd_opp_table>;
rpmhpd_opp_table: opp-table {
compatible = "operating-points-v2";
rpmhpd_opp_ret: opp1 {
opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
};
rpmhpd_opp_min_svs: opp2 {
opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
};
rpmhpd_opp_low_svs: opp3 {
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
};
rpmhpd_opp_svs: opp4 {
opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
};
rpmhpd_opp_svs_l1: opp5 {
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
};
rpmhpd_opp_nom: opp6 {
opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
};
rpmhpd_opp_nom_l1: opp7 {
opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
};
rpmhpd_opp_nom_l2: opp8 {
opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
};
rpmhpd_opp_turbo: opp9 {
opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
};
rpmhpd_opp_turbo_l1: opp10 {
opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
};
};
};
Example: rpm power domain controller and OPP table
rpmpd: power-controller {
compatible = "qcom,msm8996-rpmpd";
#power-domain-cells = <1>;
operating-points-v2 = <&rpmpd_opp_table>;
rpmpd_opp_table: opp-table {
compatible = "operating-points-v2";
rpmpd_opp_low: opp1 {
opp-level = <1>;
};
rpmpd_opp_ret: opp2 {
opp-level = <2>;
};
rpmpd_opp_svs: opp3 {
opp-level = <3>;
};
rpmpd_opp_normal: opp4 {
opp-level = <4>;
};
rpmpd_opp_high: opp5 {
opp-level = <5>;
};
rpmpd_opp_turbo: opp6 {
opp-level = <6>;
};
};
};
Example: Client/Consumer device using OPP table
leaky-device0@12350000 {
compatible = "foo,i-leak-current";
reg = <0x12350000 0x1000>;
power-domains = <&rpmhpd SDM845_MX>;
operating-points-v2 = <&leaky_opp_table>;
};
leaky_opp_table: opp-table {
compatible = "operating-points-v2";
opp1 {
opp-hz = /bits/ 64 <144000>;
required-opps = <&rpmhpd_opp_low>;
};
opp2 {
opp-hz = /bits/ 64 <400000>;
required-opps = <&rpmhpd_opp_ret>;
};
opp3 {
opp-hz = /bits/ 64 <20000000>;
required-opps = <&rpmpd_opp_svs>;
};
opp4 {
opp-hz = /bits/ 64 <25000000>;
required-opps = <&rpmpd_opp_normal>;
};
};
|
