summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
blob: 2390e4e9c84c64838e86480b4e6554768e8d124c (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
* Renesas R-Car generation 3 USB 2.0 PHY

This file provides information on what the device node for the R-Car generation
3 USB 2.0 PHY contains.

Required properties:
- compatible: "renesas,usb2-phy-r8a7795" if the device is a part of an R8A7795
	      SoC.
- reg: offset and length of the partial USB 2.0 Host register block.
- reg-names: must be "usb2_host".
- clocks: clock phandle and specifier pair(s).
- #phy-cells: see phy-bindings.txt in the same directory, must be <0>.

Optional properties:
To use a USB channel where USB 2.0 Host and HSUSB (USB 2.0 Peripheral) are
combined, the device tree node should set HSUSB properties to reg and reg-names
properties. This is because HSUSB has registers to select USB 2.0 host or
peripheral at that channel:
- reg: offset and length of the partial HSUSB register block.
- reg-names: must be "hsusb".
- interrupts: interrupt specifier for the PHY.

Example (R-Car H3):

	usb-phy@ee080200 {
		compatible = "renesas,usb2-phy-r8a7795";
		reg = <0 0xee080200 0 0x700>, <0 0xe6590100 0 0x100>;
		reg-names = "usb2_host", "hsusb";
		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
		clocks = <&mstp7_clks R8A7795_CLK_EHCI0>,
			 <&mstp7_clks R8A7795_CLK_HSUSB>;
	};

	usb-phy@ee0a0200 {
		compatible = "renesas,usb2-phy-r8a7795";
		reg = <0 0xee0a0200 0 0x700>;
		reg-names = "usb2_host";
		clocks = <&mstp7_clks R8A7795_CLK_EHCI0>;
	};