blob: 6aa625e0cb8dafec75d57d38fbc8eca06ae22bf6 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
|
* GSL 1680 touchscreen controller
Required properties:
- compatible : Must be one of the following, depending on the model:
"silead,gsl1680"
"silead,gsl1688"
"silead,gsl3670"
"silead,gsl3675"
"silead,gsl3692"
- reg : I2C slave address of the chip (0x40)
- interrupt-parent : a phandle pointing to the interrupt controller
serving the interrupt for this chip
- interrupts : interrupt specification for the gsl1680 interrupt
- power-gpios : Specification for the pin connected to the gsl1680's
shutdown input. This needs to be driven high to take the
gsl1680 out of its low power state
- touchscreen-size-x : See touchscreen.txt
- touchscreen-size-y : See touchscreen.txt
Optional properties:
- firmware-name : File basename (string) for board specific firmware
- touchscreen-inverted-x : See touchscreen.txt
- touchscreen-inverted-y : See touchscreen.txt
- touchscreen-swapped-x-y : See touchscreen.txt
- silead,max-fingers : maximum number of fingers the touchscreen can detect
- vddio-supply : regulator phandle for controller VDDIO
- avdd-supply : regulator phandle for controller AVDD
Example:
i2c@00000000 {
gsl1680: touchscreen@40 {
compatible = "silead,gsl1680";
reg = <0x40>;
interrupt-parent = <&pio>;
interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>;
power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>;
touchscreen-size-x = <480>;
touchscreen-size-y = <800>;
touchscreen-inverted-x;
touchscreen-swapped-x-y;
silead,max-fingers = <5>;
};
};
|
