1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
|
* Microchip Analog to Digital Converter (ADC)
The node for this driver must be a child node of a SPI controller, hence
all mandatory properties described in
Documentation/devicetree/bindings/spi/spi-bus.txt
must be specified.
Required properties:
- compatible: Must be one of the following, depending on the
model:
"mcp3001" (DEPRECATED)
"mcp3002" (DEPRECATED)
"mcp3004" (DEPRECATED)
"mcp3008" (DEPRECATED)
"mcp3201" (DEPRECATED)
"mcp3202" (DEPRECATED)
"mcp3204" (DEPRECATED)
"mcp3208" (DEPRECATED)
"mcp3301" (DEPRECATED)
"microchip,mcp3001"
"microchip,mcp3002"
"microchip,mcp3004"
"microchip,mcp3008"
"microchip,mcp3201"
"microchip,mcp3202"
"microchip,mcp3204"
"microchip,mcp3208"
"microchip,mcp3301"
"microchip,mcp3550-50"
"microchip,mcp3550-60"
"microchip,mcp3551"
"microchip,mcp3553"
NOTE: The use of the compatibles with no vendor prefix
is deprecated and only listed because old DT use them.
- spi-cpha, spi-cpol (boolean):
Either SPI mode (0,0) or (1,1) must be used, so specify
none or both of spi-cpha, spi-cpol. The MCP3550/1/3
is more efficient in mode (1,1) as only 3 instead of
4 bytes need to be read from the ADC, but not all SPI
masters support it.
- vref-supply: Phandle to the external reference voltage supply.
Examples:
spi_controller {
mcp3x0x@0 {
compatible = "mcp3002";
reg = <0>;
spi-max-frequency = <1000000>;
vref-supply = <&vref_reg>;
};
};
|
