1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
|
Mediatek display subsystem
==========================
The Mediatek display subsystem consists of various DISP function blocks in the
MMSYS register space. The connections between them can be configured by output
and input selectors in the MMSYS_CONFIG register space. Pixel clock and start
of frame signal are distributed to the other function blocks by a DISP_MUTEX
function block.
All DISP device tree nodes must be siblings to the central MMSYS_CONFIG node.
For a description of the MMSYS_CONFIG binding, see
Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt.
DISP function blocks
====================
A display stream starts at a source function block that reads pixel data from
memory and ends with a sink function block that drives pixels on a display
interface, or writes pixels back to memory. All DISP function blocks have
their own register space, interrupt, and clock gate. The blocks that can
access memory additionally have to list the IOMMU and local arbiter they are
connected to.
For a description of the display interface sink function blocks, see
Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt and
Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml.
Required properties (all function blocks):
- compatible: "mediatek,<chip>-disp-<function>", one of
"mediatek,<chip>-disp-ovl" - overlay (4 layers, blending, csc)
"mediatek,<chip>-disp-ovl-2l" - overlay (2 layers, blending, csc)
"mediatek,<chip>-disp-rdma" - read DMA / line buffer
"mediatek,<chip>-disp-wdma" - write DMA
"mediatek,<chip>-disp-ccorr" - color correction
"mediatek,<chip>-disp-color" - color processor
"mediatek,<chip>-disp-dither" - dither
"mediatek,<chip>-disp-aal" - adaptive ambient light controller
"mediatek,<chip>-disp-gamma" - gamma correction
"mediatek,<chip>-disp-merge" - merge streams from two RDMA sources
"mediatek,<chip>-disp-postmask" - control round corner for display frame
"mediatek,<chip>-disp-split" - split stream to two encoders
"mediatek,<chip>-disp-ufoe" - data compression engine
"mediatek,<chip>-dsi" - DSI controller, see mediatek,dsi.txt
"mediatek,<chip>-dpi" - DPI controller, see mediatek,dpi.txt
"mediatek,<chip>-disp-mutex" - display mutex
"mediatek,<chip>-disp-od" - overdrive
the supported chips are mt2701, mt7623, mt2712, mt8167, mt8173, mt8183 and mt8192.
- reg: Physical base address and length of the function block register space
- interrupts: The interrupt signal from the function block (required, except for
merge and split function blocks).
- clocks: device clocks
See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
For most function blocks this is just a single clock input. Only the DSI and
DPI controller nodes have multiple clock inputs. These are documented in
mediatek,dsi.txt and mediatek,dpi.txt, respectively.
An exception is that the mt8183 mutex is always free running with no clocks property.
Required properties (DMA function blocks):
- compatible: Should be one of
"mediatek,<chip>-disp-ovl"
"mediatek,<chip>-disp-rdma"
"mediatek,<chip>-disp-wdma"
the supported chips are mt2701, mt8167 and mt8173.
- larb: Should contain a phandle pointing to the local arbiter device as defined
in Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
- iommus: Should point to the respective IOMMU block with master port as
argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
for details.
Optional properties (RDMA function blocks):
- mediatek,rdma-fifo-size: rdma fifo size may be different even in same SOC, add this
property to the corresponding rdma
the value is the Max value which defined in hardware data sheet.
mediatek,rdma-fifo-size of mt8173-rdma0 is 8K
mediatek,rdma-fifo-size of mt8183-rdma0 is 5K
mediatek,rdma-fifo-size of mt8183-rdma1 is 2K
Examples:
mmsys: clock-controller@14000000 {
compatible = "mediatek,mt8173-mmsys", "syscon";
reg = <0 0x14000000 0 0x1000>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
#clock-cells = <1>;
};
ovl0: ovl@1400c000 {
compatible = "mediatek,mt8173-disp-ovl";
reg = <0 0x1400c000 0 0x1000>;
interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_OVL0>;
iommus = <&iommu M4U_PORT_DISP_OVL0>;
mediatek,larb = <&larb0>;
};
ovl1: ovl@1400d000 {
compatible = "mediatek,mt8173-disp-ovl";
reg = <0 0x1400d000 0 0x1000>;
interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_OVL1>;
iommus = <&iommu M4U_PORT_DISP_OVL1>;
mediatek,larb = <&larb4>;
};
rdma0: rdma@1400e000 {
compatible = "mediatek,mt8173-disp-rdma";
reg = <0 0x1400e000 0 0x1000>;
interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_RDMA0>;
iommus = <&iommu M4U_PORT_DISP_RDMA0>;
mediatek,larb = <&larb0>;
mediatek,rdma-fifosize = <8192>;
};
rdma1: rdma@1400f000 {
compatible = "mediatek,mt8173-disp-rdma";
reg = <0 0x1400f000 0 0x1000>;
interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_RDMA1>;
iommus = <&iommu M4U_PORT_DISP_RDMA1>;
mediatek,larb = <&larb4>;
};
rdma2: rdma@14010000 {
compatible = "mediatek,mt8173-disp-rdma";
reg = <0 0x14010000 0 0x1000>;
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_RDMA2>;
iommus = <&iommu M4U_PORT_DISP_RDMA2>;
mediatek,larb = <&larb4>;
};
wdma0: wdma@14011000 {
compatible = "mediatek,mt8173-disp-wdma";
reg = <0 0x14011000 0 0x1000>;
interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_WDMA0>;
iommus = <&iommu M4U_PORT_DISP_WDMA0>;
mediatek,larb = <&larb0>;
};
wdma1: wdma@14012000 {
compatible = "mediatek,mt8173-disp-wdma";
reg = <0 0x14012000 0 0x1000>;
interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_WDMA1>;
iommus = <&iommu M4U_PORT_DISP_WDMA1>;
mediatek,larb = <&larb4>;
};
color0: color@14013000 {
compatible = "mediatek,mt8173-disp-color";
reg = <0 0x14013000 0 0x1000>;
interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_COLOR0>;
};
color1: color@14014000 {
compatible = "mediatek,mt8173-disp-color";
reg = <0 0x14014000 0 0x1000>;
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_COLOR1>;
};
aal@14015000 {
compatible = "mediatek,mt8173-disp-aal";
reg = <0 0x14015000 0 0x1000>;
interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_AAL>;
};
gamma@14016000 {
compatible = "mediatek,mt8173-disp-gamma";
reg = <0 0x14016000 0 0x1000>;
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_GAMMA>;
};
ufoe@1401a000 {
compatible = "mediatek,mt8173-disp-ufoe";
reg = <0 0x1401a000 0 0x1000>;
interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_UFOE>;
};
dsi0: dsi@1401b000 {
/* See mediatek,dsi.txt for details */
};
dpi0: dpi@1401d000 {
/* See mediatek,dpi.txt for details */
};
mutex: mutex@14020000 {
compatible = "mediatek,mt8173-disp-mutex";
reg = <0 0x14020000 0 0x1000>;
interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_MUTEX_32K>;
};
od@14023000 {
compatible = "mediatek,mt8173-disp-od";
reg = <0 0x14023000 0 0x1000>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_OD>;
};
|
