summaryrefslogtreecommitdiffstats
path: root/virt
AgeCommit message (Collapse)AuthorFilesLines
2016-06-02KVM: x86: avoid vmalloc(0) in the KVM_SET_CPUIDPaolo Bonzini1-10/+12
This causes an ugly dmesg splat. Beautified syzkaller testcase: #include <unistd.h> #include <sys/syscall.h> #include <sys/ioctl.h> #include <fcntl.h> #include <linux/kvm.h> long r[8]; int main() { struct kvm_irq_routing ir = { 0 }; r[2] = open("/dev/kvm", O_RDWR); r[3] = ioctl(r[2], KVM_CREATE_VM, 0); r[4] = ioctl(r[3], KVM_SET_GSI_ROUTING, &ir); return 0; } Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2016-06-02KVM: irqfd: fix NULL pointer dereference in kvm_irq_map_gsiPaolo Bonzini1-1/+1
Found by syzkaller: BUG: unable to handle kernel NULL pointer dereference at 0000000000000120 IP: [<ffffffffa0797202>] kvm_irq_map_gsi+0x12/0x90 [kvm] PGD 6f80b067 PUD b6535067 PMD 0 Oops: 0000 [#1] SMP CPU: 3 PID: 4988 Comm: a.out Not tainted 4.4.9-300.fc23.x86_64 #1 [...] Call Trace: [<ffffffffa0795f62>] irqfd_update+0x32/0xc0 [kvm] [<ffffffffa0796c7c>] kvm_irqfd+0x3dc/0x5b0 [kvm] [<ffffffffa07943f4>] kvm_vm_ioctl+0x164/0x6f0 [kvm] [<ffffffff81241648>] do_vfs_ioctl+0x298/0x480 [<ffffffff812418a9>] SyS_ioctl+0x79/0x90 [<ffffffff817a1062>] tracesys_phase2+0x84/0x89 Code: b5 71 a7 e0 5b 41 5c 41 5d 5d f3 c3 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 8b 8f 10 2e 00 00 31 c0 48 89 e5 <39> 91 20 01 00 00 76 6a 48 63 d2 48 8b 94 d1 28 01 00 00 48 85 RIP [<ffffffffa0797202>] kvm_irq_map_gsi+0x12/0x90 [kvm] RSP <ffff8800926cbca8> CR2: 0000000000000120 Testcase: #include <unistd.h> #include <sys/syscall.h> #include <string.h> #include <stdint.h> #include <linux/kvm.h> #include <fcntl.h> #include <sys/ioctl.h> long r[26]; int main() { memset(r, -1, sizeof(r)); r[2] = open("/dev/kvm", 0); r[3] = ioctl(r[2], KVM_CREATE_VM, 0); struct kvm_irqfd ifd; ifd.fd = syscall(SYS_eventfd2, 5, 0); ifd.gsi = 3; ifd.flags = 2; ifd.resamplefd = ifd.fd; r[25] = ioctl(r[3], KVM_IRQFD, &ifd); return 0; } Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2016-06-02KVM: arm/arm64: vgic-new: Removel harmful BUG_ONMarc Zyngier1-3/+1
When changing the active bit from an MMIO trap, we decide to explode if the intid is that of a private interrupt. This flawed logic comes from the fact that we were assuming that kvm_vcpu_kick() as called by kvm_arm_halt_vcpu() would not return before the called vcpu responded, but this is not the case, so we need to perform this wait even for private interrupts. Dropping the BUG_ON seems like the right thing to do. [ Commit message tweaked by Christoffer ] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-31KVM: arm/arm64: vgic-v3: Always resample level interruptsMarc Zyngier1-5/+9
When reading back from the list registers, we need to perform two actions for level interrupts: 1) clear the soft-pending bit if the interrupt is not pending anymore *in the list register* 2) resample the line level and propagate it to the pending state But these two actions shouldn't be linked, and we should *always* resample the line level, no matter what state is in the list register. Otherwise, we may end-up injecting spurious interrupts that have been already retired. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-31KVM: arm/arm64: vgic-v2: Always resample level interruptsMarc Zyngier1-5/+9
When reading back from the list registers, we need to perform two actions for level interrupts: 1) clear the soft-pending bit if the interrupt is not pending anymore *in the list register* 2) resample the line level and propagate it to the pending state But these two actions shouldn't be linked, and we should *always* resample the line level, no matter what state is in the list register. Otherwise, we may end-up injecting spurious interrupts that have been already retired. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-31KVM: arm/arm64: vgic-v2: Clear all dirty LRsChristoffer Dall1-4/+3
When saving the state of the list registers, it is critical to reset them zero, as we could otherwise leave unexpected EOI interrupts pending for virtual level interrupts. Cc: stable@vger.kernel.org # v4.6+ Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-05-25KVM: Create debugfs dir and stat files for each VMJanosch Frank1-10/+177
This patch adds a kvm debugfs subdirectory for each VM, which is named after its pid and file descriptor. The directories contain the same kind of files that are already in the kvm debugfs directory, but the data exported through them is now VM specific. This makes the debugfs kvm data a convenient alternative to the tracepoints which already have per VM data. The debugfs data is easy to read and low overhead. CC: Dan Carpenter <dan.carpenter@oracle.com> [includes fixes by Dan Carpenter] Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-24Merge tag 'kvm-arm-for-4-7-take2' of ↵Paolo Bonzini18-112/+4045
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-next KVM/ARM Changes for v4.7 take 2 "The GIC is dead; Long live the GIC" This set of changes include the new vgic, which is a reimplementation of our horribly broken legacy vgic implementation. The two implementations will live side-by-side (with the new being the configured default) for one kernel release and then we'll remove it. Also fixes a non-critical issue with virtual abort injection to guests.
2016-05-20KVM: arm/arm64: vgic-new: Synchronize changes to active stateChristoffer Dall1-39/+66
When modifying the active state of an interrupt via the MMIO interface, we should ensure that the write has the intended effect. If a guest sets an interrupt to active, but that interrupt is already flushed into a list register on a running VCPU, then that VCPU will write the active state back into the struct vgic_irq upon returning from the guest and syncing its state. This is a non-benign race, because the guest can observe that an interrupt is not active, and it can have a reasonable expectations that other VCPUs will not ack any IRQs, and then set the state to active, and expect it to stay that way. Currently we are not honoring this case. Thefore, change both the SACTIVE and CACTIVE mmio handlers to stop the world, change the irq state, potentially queue the irq if we're setting it to active, and then continue. We take this chance to slightly optimize these functions by not stopping the world when touching private interrupts where there is inherently no possible race. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: enable buildAndre Przywara1-0/+5
Now that the new VGIC implementation has reached feature parity with the old one, add the new files to the build system and add a Kconfig option to switch between the two versions. We set the default to the new version to get maximum test coverage, in case people experience problems they can switch back to the old behaviour if needed. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: implement mapped IRQ handlingAndre Przywara1-0/+53
We now store the mapped hardware IRQ number in our struct, so we don't need the irq_phys_map for the new VGIC. Implement the hardware IRQ mapping on top of the reworked arch timer interface. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Wire up irqfd injectionAndre Przywara1-0/+52
Connect to the new VGIC to the irqfd framework, so that we can inject IRQs. GSI routing and MSI routing is not yet implemented. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Add vgic_v2/v3_enableEric Auger2-2/+32
Enable the VGIC operation by properly initialising the registers in the hypervisor GIC interface. Signed-off-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: vgic_init: implement map_resourcesEric Auger4-0/+175
map_resources is the last initialization step. It is executed on first VCPU run. At that stage the code checks that userspace has provided the base addresses for the relevant VGIC regions, which depend on the type of VGIC that is exposed to the guest. Also we check if the two regions overlap. If the checks succeeded, we register the respective register frames with the kvm_io_bus framework. If we emulate a GICv2, the function also forces vgic_init execution if it has not been executed yet. Also we map the virtual GIC CPU interface onto the guest's CPU interface. Signed-off-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: vgic_init: implement vgic_initEric Auger5-0/+239
This patch allocates and initializes the data structures used to model the vgic distributor and virtual cpu interfaces. At that stage the number of IRQs and number of virtual CPUs is frozen. Signed-off-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: vgic_init: implement vgic_createEric Auger1-0/+84
This patch implements the vgic_creation function which is called on CREATE_IRQCHIP VM IOCTL (v2 only) or KVM_CREATE_DEVICE Signed-off-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: vgic_init: implement kvm_vgic_hyp_initEric Auger4-0/+245
Implements kvm_vgic_hyp_init and vgic_probe function. This uses the new firmware independent VGIC probing to support both ACPI and DT based systems (code from Marc Zyngier). The vgic_global struct is enriched with new fields populated by those functions. Signed-off-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Add userland GIC CPU interface accessAndre Przywara3-2/+116
Using the VMCR accessors we provide access to GIC CPU interface state to userland by wiring it up to the existing userland interface. [Marc: move and make VMCR accessors static, streamline MMIO handlers] Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Add GICH_VMCR accessorsAndre Przywara3-0/+72
Since the GIC CPU interface is always virtualized by the hardware, we don't have CPU interface state information readily available in our emulation if userland wants to save or restore it. Fortunately the GIC hypervisor interface provides the VMCR register to access the required virtual CPU interface bits. Provide wrappers for GICv2 and GICv3 hosts to have access to this register. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Add userland access to VGIC dist registersAndre Przywara1-1/+54
Userland may want to save and restore the state of the in-kernel VGIC, so we provide the code which takes a userland request and translate that into calls to our MMIO framework. From Christoffer: When accessing the VGIC state from userspace we really don't want a VCPU to be messing with the state at the same time, and the API specifies that we should return -EBUSY if any VCPUs are running. Check and prevent VCPUs from running by grabbing their mutexes, one by one, and error out if we fail. (Note: This could potentially be simplified to just do a simple check and see if any VCPUs are running, and return -EBUSY then, without enforcing the locking throughout the duration of the uaccess, if we think that taking/releasing all these mutexes for every single GIC register access is too heavyweight.) Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Export register access interfaceChristoffer Dall2-0/+38
Userland can access the emulated GIC to save and restore its state for initialization or migration purposes. The kvm_io_bus API requires an absolute gpa, which does not fit the KVM_DEV_ARM_VGIC_GRP_DIST_REGS user API, that only provides relative offsets. So we provide a wrapper to plug into our MMIO framework and find the respective register handler. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2016-05-20KVM: arm/arm64: vgic-new: vgic_kvm_device: access to VGIC registersEric Auger3-2/+90
This patch implements the switches for KVM_DEV_ARM_VGIC_GRP_DIST_REGS and KVM_DEV_ARM_VGIC_GRP_CPU_REGS API which allows the userspace to access VGIC registers. Signed-off-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: vgic_kvm_device: KVM_DEV_ARM_VGIC_GRP_ADDREric Auger1-0/+38
This patch implements the KVM_DEV_ARM_VGIC_GRP_ADDR group which enables to set the base address of GIC regions as seen by the guest. Signed-off-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: vgic_kvm_device: implement kvm_vgic_addrEric Auger2-0/+89
kvm_vgic_addr is used by the userspace to set the base address of the following register regions, as seen by the guest: - distributor(v2 and v3), - re-distributors (v3), - CPU interface (v2). Signed-off-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: vgic_kvm_device: KVM_DEV_ARM_VGIC_GRP_CTRLEric Auger1-0/+22
This patch implements the KVM_DEV_ARM_VGIC_GRP_CTRL group API featuring KVM_DEV_ARM_VGIC_CTRL_INIT attribute. The vgic_init function is not yet implemented though. Signed-off-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: vgic_kvm_device: KVM_DEV_ARM_VGIC_GRP_NR_IRQSEric Auger1-4/+79
This patch implements the KVM_DEV_ARM_VGIC_GRP_NR_IRQS group. This modality is supported by both VGIC V2 and V3 KVM device as will be other groups, hence the introduction of common helpers. Signed-off-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: vgic_kvm_device: KVM device ops registrationEric Auger2-0/+110
This patch introduces the skeleton for the KVM device operations associated to KVM_DEV_TYPE_ARM_VGIC_V2 and KVM_DEV_TYPE_ARM_VGIC_V3. At that stage kvm_vgic_create is stubbed. Signed-off-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Add GICv3 SGI system register trap handlerAndre Przywara1-0/+106
In contrast to GICv2 SGIs in a GICv3 implementation are not triggered by a MMIO write, but with a system register write. KVM knows about that register already, we just need to implement the handler and wire it up to the core KVM/ARM code. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Add GICv3 IROUTER register handlersAndre Przywara1-1/+40
Since GICv3 supports much more than the 8 CPUs the GICv2 ITARGETSR register can handle, the new IROUTER register covers the whole range of possible target (V)CPUs by using the same MPIDR that the cores report themselves. In addition to translating this MPIDR into a vcpu pointer we store the originally written value as well. The architecture allows to write any values into the register, which must be read back as written. Since we don't support affinity level 3, we don't need to take care about the upper word of this 64-bit register, which simplifies the handling a bit. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Add GICv3 IDREGS register handlerAndre Przywara1-2/+14
We implement the only one ID register that is required by the architecture, also this is the one that Linux actually checks. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Add GICv3 redistributor IIDR and TYPER handlerAndre Przywara1-2/+30
The redistributor TYPER tells the OS about the associated MPIDR, also the LAST bit is crucial to determine the number of redistributors. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Add GICv3 CTLR, IIDR, TYPER handlersAndre Przywara2-1/+48
As in the GICv2 emulation we handle those three registers in one function. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Add GICv3 MMIO handling frameworkAndre Przywara4-0/+238
Create a new file called vgic-mmio-v3.c and describe the GICv3 distributor and redistributor registers there. This adds a special macro to deal with the split of SGI/PPI in the redistributor and SPIs in the distributor, which allows us to reuse the existing GICv2 handlers for those registers which are compatible. Also we provide a function to deal with the registration of the two separate redistributor frames per VCPU. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Add SGIPENDR register handlersAndre Przywara1-2/+60
As this register is v2 specific, its implementation lives entirely in vgic-mmio-v2.c. This register allows setting the source mask of an IPI. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Add SGIR register handlerAndre Przywara1-1/+42
Triggering an IPI via this register is v2 specific, so the implementation lives entirely in vgic-mmio-v2.c. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Add TARGET registers handlersAndre Przywara1-1/+42
The target register handlers are v2 emulation specific, so their implementation lives entirely in vgic-mmio-v2.c. We copy the old VGIC behaviour of assigning an IRQ to the first VCPU set in the target mask instead of making it possibly pending on multiple VCPUs. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Add CONFIG registers handlersAndre Przywara3-1/+55
The config register handlers are shared between the v2 and v3 emulation, so their implementation goes into vgic-mmio.c, to be easily referenced from the v3 emulation as well later. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2016-05-20KVM: arm/arm64: vgic-new: Add PRIORITY registers handlersAndre Przywara4-1/+50
The priority register handlers are shared between the v2 and v3 emulation, so their implementation goes into vgic-mmio.c, to be easily referenced from the v3 emulation as well later. There is a corner case when we change the priority of a pending interrupt which we don't handle at the moment. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Add ACTIVE registers handlersAndre Przywara3-2/+93
The active register handlers are shared between the v2 and v3 emulation, so their implementation goes into vgic-mmio.c, to be easily referenced from the v3 emulation as well later. Since activation/deactivation of an interrupt may happen entirely in the guest without it ever exiting, we need some extra logic to properly track the active state. For clearing the active state, we basically have to halt the guest to make sure this is properly propagated into the respective VCPUs. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2016-05-20KVM: arm/arm64: vgic-new: Add PENDING registers handlersAndre Przywara3-2/+74
The pending register handlers are shared between the v2 and v3 emulation, so their implementation goes into vgic-mmio.c, to be easily referenced from the v3 emulation as well later. For level triggered interrupts the real line level is unaffected by this write, so we keep this state separate and combine it with the device's level to get the actual pending state. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Add ENABLE registers handlersAndre Przywara3-2/+69
As the enable register handlers are shared between the v2 and v3 emulation, their implementation goes into vgic-mmio.c, to be easily referenced from the v3 emulation as well later. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Add CTLR, TYPER and IIDR handlersMarc Zyngier3-1/+64
Those three registers are v2 emulation specific, so their implementation lives entirely in vgic-mmio-v2.c. Also they are handled in one function, as their implementation is pretty simple. When the guest enables the distributor, we kick all VCPUs to get potentially pending interrupts serviced. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Add GICv2 MMIO handling frameworkAndre Przywara4-0/+106
Create vgic-mmio-v2.c to describe GICv2 emulation specific handlers using the initializer macros provided by the VGIC MMIO framework. Provide a function to register the GICv2 distributor registers to the kvm_io_bus framework. The actual handler functions are still stubs in this patch. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Add MMIO handling frameworkMarc Zyngier2-0/+283
Add an MMIO handling framework to the VGIC emulation: Each register is described by its offset, size (or number of bits per IRQ, if applicable) and the read/write handler functions. We provide initialization macros to describe each GIC register later easily. Separate dispatch functions for read and write accesses are connected to the kvm_io_bus framework and binary-search for the responsible register handler based on the offset address within the region. We convert the incoming data (referenced by a pointer) to the host's endianess and use pass-by-value to hand the data over to the actual handler functions. The register handler prototype and the endianess conversion are courtesy of Christoffer Dall. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Implement kvm_vgic_vcpu_pending_irqEric Auger1-0/+25
Tell KVM whether a particular VCPU has an IRQ that needs handling in the guest. This is used to decide whether a VCPU is runnable. Signed-off-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
2016-05-20KVM: arm/arm64: vgic-new: Add GICv3 world switch backendMarc Zyngier3-5/+211
As the GICv3 virtual interface registers differ from their GICv2 siblings, we need different handlers for processing maintenance interrupts and reading/writing to the LRs. Implement the respective handler functions and connect them to existing code to be called if the host is using a GICv3. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Add GICv2 world switch backendMarc Zyngier3-0/+188
Processing maintenance interrupts and accessing the list registers are dependent on the host's GIC version. Introduce vgic-v2.c to contain GICv2 specific functions. Implement the GICv2 specific code for syncing the emulation state into the VGIC registers. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Add IRQ sync/flush frameworkMarc Zyngier2-0/+194
Implement the framework for syncing IRQs between our emulation and the list registers, which represent the guest's view of IRQs. This is done in kvm_vgic_flush_hwstate and kvm_vgic_sync_hwstate, which gets called on guest entry and exit. The code talking to the actual GICv2/v3 hardware is added in the following patches. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-20KVM: arm/arm64: vgic-new: Add IRQ sortingChristoffer Dall1-0/+57
Adds the sorting function to cover the case where you have more IRQs to consider than you have LRs. We now consider priorities. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
2016-05-20KVM: arm/arm64: vgic-new: Implement virtual IRQ injectionChristoffer Dall2-0/+212
Provide a vgic_queue_irq_unlock() function which decides whether a given IRQ needs to be queued to a VCPU's ap_list. This should be called whenever an IRQ becomes pending or enabled, either as a result of userspace injection, from in-kernel emulated devices like the architected timer or from MMIO accesses to the distributor emulation. Also provides the necessary functions to allow userland to inject an IRQ to a guest. Since this is the first code that starts using our locking mechanism, we add some (hopefully) clear documentation of our locking strategy and requirements along with this patch. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>