| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
I saw the below splatting after the host suspended and resumed.
WARNING: CPU: 0 PID: 2943 at kvm/arch/x86/kvm/../../../virt/kvm/kvm_main.c:5531 kvm_resume+0x2c/0x30 [kvm]
CPU: 0 PID: 2943 Comm: step_after_susp Tainted: G W IOE 5.17.0-rc3+ #4
RIP: 0010:kvm_resume+0x2c/0x30 [kvm]
Call Trace:
<TASK>
syscore_resume+0x90/0x340
suspend_devices_and_enter+0xaee/0xe90
pm_suspend.cold+0x36b/0x3c2
state_store+0x82/0xf0
kernfs_fop_write_iter+0x1b6/0x260
new_sync_write+0x258/0x370
vfs_write+0x33f/0x510
ksys_write+0xc9/0x160
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
lockdep_is_held() can return -1 when lockdep is disabled which triggers
this warning. Let's use lockdep_assert_not_held() which can detect
incorrect calls while holding a lock and it also avoids false negatives
when lockdep is disabled.
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1644920142-81249-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Pull kvm fixes from Paolo Bonzini:
"Two larger x86 series:
- Redo incorrect fix for SEV/SMAP erratum
- Windows 11 Hyper-V workaround
Other x86 changes:
- Various x86 cleanups
- Re-enable access_tracking_perf_test
- Fix for #GP handling on SVM
- Fix for CPUID leaf 0Dh in KVM_GET_SUPPORTED_CPUID
- Fix for ICEBP in interrupt shadow
- Avoid false-positive RCU splat
- Enable Enlightened MSR-Bitmap support for real
ARM:
- Correctly update the shadow register on exception injection when
running in nVHE mode
- Correctly use the mm_ops indirection when performing cache
invalidation from the page-table walker
- Restrict the vgic-v3 workaround for SEIS to the two known broken
implementations
Generic code changes:
- Dead code cleanup"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (43 commits)
KVM: eventfd: Fix false positive RCU usage warning
KVM: nVMX: Allow VMREAD when Enlightened VMCS is in use
KVM: nVMX: Implement evmcs_field_offset() suitable for handle_vmread()
KVM: nVMX: Rename vmcs_to_field_offset{,_table}
KVM: nVMX: eVMCS: Filter out VM_EXIT_SAVE_VMX_PREEMPTION_TIMER
KVM: nVMX: Also filter MSR_IA32_VMX_TRUE_PINBASED_CTLS when eVMCS
selftests: kvm: check dynamic bits against KVM_X86_XCOMP_GUEST_SUPP
KVM: x86: add system attribute to retrieve full set of supported xsave states
KVM: x86: Add a helper to retrieve userspace address from kvm_device_attr
selftests: kvm: move vm_xsave_req_perm call to amx_test
KVM: x86: Sync the states size with the XCR0/IA32_XSS at, any time
KVM: x86: Update vCPU's runtime CPUID on write to MSR_IA32_XSS
KVM: x86: Keep MSR_IA32_XSS unchanged for INIT
KVM: x86: Free kvm_cpuid_entry2 array on post-KVM_RUN KVM_SET_CPUID{,2}
KVM: nVMX: WARN on any attempt to allocate shadow VMCS for vmcs02
KVM: selftests: Don't skip L2's VMCALL in SMM test for SVM guest
KVM: x86: Check .flags in kvm_cpuid_check_equal() too
KVM: x86: Forcibly leave nested virt when SMM state is toggled
KVM: SVM: drop unnecessary code in svm_hv_vmcb_dirty_nested_enlightenments()
KVM: SVM: hyper-v: Enable Enlightened MSR-Bitmap support for real
...
|
|
Fix the following false positive warning:
=============================
WARNING: suspicious RCU usage
5.16.0-rc4+ #57 Not tainted
-----------------------------
arch/x86/kvm/../../../virt/kvm/eventfd.c:484 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
3 locks held by fc_vcpu 0/330:
#0: ffff8884835fc0b0 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x88/0x6f0 [kvm]
#1: ffffc90004c0bb68 (&kvm->srcu){....}-{0:0}, at: vcpu_enter_guest+0x600/0x1860 [kvm]
#2: ffffc90004c0c1d0 (&kvm->irq_srcu){....}-{0:0}, at: kvm_notify_acked_irq+0x36/0x180 [kvm]
stack backtrace:
CPU: 26 PID: 330 Comm: fc_vcpu 0 Not tainted 5.16.0-rc4+
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x44/0x57
kvm_notify_acked_gsi+0x6b/0x70 [kvm]
kvm_notify_acked_irq+0x8d/0x180 [kvm]
kvm_ioapic_update_eoi+0x92/0x240 [kvm]
kvm_apic_set_eoi_accelerated+0x2a/0xe0 [kvm]
handle_apic_eoi_induced+0x3d/0x60 [kvm_intel]
vmx_handle_exit+0x19c/0x6a0 [kvm_intel]
vcpu_enter_guest+0x66e/0x1860 [kvm]
kvm_arch_vcpu_ioctl_run+0x438/0x7f0 [kvm]
kvm_vcpu_ioctl+0x38a/0x6f0 [kvm]
__x64_sys_ioctl+0x89/0xc0
do_syscall_64+0x3a/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Since kvm_unregister_irq_ack_notifier() does synchronize_srcu(&kvm->irq_srcu),
kvm->irq_ack_notifier_list is protected by kvm->irq_srcu. In fact,
kvm->irq_srcu SRCU read lock is held in kvm_notify_acked_irq(), making it
a false positive warning. So use hlist_for_each_entry_srcu() instead of
hlist_for_each_entry_rcu().
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Hou Wenlong <houwenlong93@linux.alibaba.com>
Message-Id: <f98bac4f5052bad2c26df9ad50f7019e40434512.1643265976.git.houwenlong.hwl@antgroup.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Revert a completely broken check on an "invalid" RIP in SVM's workaround
for the DecodeAssists SMAP errata. kvm_vcpu_gfn_to_memslot() obviously
expects a gfn, i.e. operates in the guest physical address space, whereas
RIP is a virtual (not even linear) address. The "fix" worked for the
problematic KVM selftest because the test identity mapped RIP.
Fully revert the hack instead of trying to translate RIP to a GPA, as the
non-SEV case is now handled earlier, and KVM cannot access guest page
tables to translate RIP.
This reverts commit e72436bc3a5206f95bb384e741154166ddb3202e.
Fixes: e72436bc3a52 ("KVM: SVM: avoid infinite loop on NPF from bad address")
Reported-by: Liam Merwick <liam.merwick@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Message-Id: <20220120010719.711476-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The async parameter of hva_to_pfn_remapped() is not used, so remove it.
Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Message-Id: <20220124020456.156386-1-xianting.tian@linux.alibaba.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Pull more kvm updates from Paolo Bonzini:
"Generic:
- selftest compilation fix for non-x86
- KVM: avoid warning on s390 in mark_page_dirty
x86:
- fix page write-protection bug and improve comments
- use binary search to lookup the PMU event filter, add test
- enable_pmu module parameter support for Intel CPUs
- switch blocked_vcpu_on_cpu_lock to raw spinlock
- cleanups of blocked vCPU logic
- partially allow KVM_SET_CPUID{,2} after KVM_RUN (5.16 regression)
- various small fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (46 commits)
docs: kvm: fix WARNINGs from api.rst
selftests: kvm/x86: Fix the warning in lib/x86_64/processor.c
selftests: kvm/x86: Fix the warning in pmu_event_filter_test.c
kvm: selftests: Do not indent with spaces
kvm: selftests: sync uapi/linux/kvm.h with Linux header
selftests: kvm: add amx_test to .gitignore
KVM: SVM: Nullify vcpu_(un)blocking() hooks if AVIC is disabled
KVM: SVM: Move svm_hardware_setup() and its helpers below svm_x86_ops
KVM: SVM: Drop AVIC's intermediate avic_set_running() helper
KVM: VMX: Don't do full kick when handling posted interrupt wakeup
KVM: VMX: Fold fallback path into triggering posted IRQ helper
KVM: VMX: Pass desired vector instead of bool for triggering posted IRQ
KVM: VMX: Don't do full kick when triggering posted interrupt "fails"
KVM: SVM: Skip AVIC and IRTE updates when loading blocking vCPU
KVM: SVM: Use kvm_vcpu_is_blocking() in AVIC load to handle preemption
KVM: SVM: Remove unnecessary APICv/AVIC update in vCPU unblocking path
KVM: SVM: Don't bother checking for "running" AVIC when kicking for IPIs
KVM: SVM: Signal AVIC doorbell iff vCPU is in guest mode
KVM: x86: Remove defunct pre_block/post_block kvm_x86_ops hooks
KVM: x86: Unexport LAPIC's switch_to_{hv,sw}_timer() helpers
...
|
|
Move the seemingly generic block_vcpu_list from kvm_vcpu to vcpu_vmx, and
rename the list and all associated variables to clarify that it tracks
the set of vCPU that need to be poked on a posted interrupt to the wakeup
vector. The list is not used to track _all_ vCPUs that are blocking, and
the term "blocked" can be misleading as it may refer to a blocking
condition in the host or the guest, where as the PI wakeup case is
specifically for the vCPUs that are actively blocking from within the
guest.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20211208015236.1616697-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Remove kvm_vcpu.pre_pcpu as it no longer has any users. No functional
change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20211208015236.1616697-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Avoid warnings on s390 like
[ 1801.980931] CPU: 12 PID: 117600 Comm: kworker/12:0 Tainted: G E 5.17.0-20220113.rc0.git0.32ce2abb03cf.300.fc35.s390x+next #1
[ 1801.980938] Workqueue: events irqfd_inject [kvm]
[...]
[ 1801.981057] Call Trace:
[ 1801.981060] [<000003ff805f0f5c>] mark_page_dirty_in_slot+0xa4/0xb0 [kvm]
[ 1801.981083] [<000003ff8060e9fe>] adapter_indicators_set+0xde/0x268 [kvm]
[ 1801.981104] [<000003ff80613c24>] set_adapter_int+0x64/0xd8 [kvm]
[ 1801.981124] [<000003ff805fb9aa>] kvm_set_irq+0xc2/0x130 [kvm]
[ 1801.981144] [<000003ff805f8d86>] irqfd_inject+0x76/0xa0 [kvm]
[ 1801.981164] [<0000000175e56906>] process_one_work+0x1fe/0x470
[ 1801.981173] [<0000000175e570a4>] worker_thread+0x64/0x498
[ 1801.981176] [<0000000175e5ef2c>] kthread+0x10c/0x110
[ 1801.981180] [<0000000175de73c8>] __ret_from_fork+0x40/0x58
[ 1801.981185] [<000000017698440a>] ret_from_fork+0xa/0x40
when writing to a guest from an irqfd worker as long as we do not have
the dirty ring.
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reluctantly-acked-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20220113122924.740496-1-borntraeger@linux.ibm.com>
Fixes: 2efd61a608b0 ("KVM: Warn if mark_page_dirty() is called without an active vCPU")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Pull kvm updates from Paolo Bonzini:
"RISCV:
- Use common KVM implementation of MMU memory caches
- SBI v0.2 support for Guest
- Initial KVM selftests support
- Fix to avoid spurious virtual interrupts after clearing hideleg CSR
- Update email address for Anup and Atish
ARM:
- Simplification of the 'vcpu first run' by integrating it into KVM's
'pid change' flow
- Refactoring of the FP and SVE state tracking, also leading to a
simpler state and less shared data between EL1 and EL2 in the nVHE
case
- Tidy up the header file usage for the nvhe hyp object
- New HYP unsharing mechanism, finally allowing pages to be unmapped
from the Stage-1 EL2 page-tables
- Various pKVM cleanups around refcounting and sharing
- A couple of vgic fixes for bugs that would trigger once the vcpu
xarray rework is merged, but not sooner
- Add minimal support for ARMv8.7's PMU extension
- Rework kvm_pgtable initialisation ahead of the NV work
- New selftest for IRQ injection
- Teach selftests about the lack of default IPA space and page sizes
- Expand sysreg selftest to deal with Pointer Authentication
- The usual bunch of cleanups and doc update
s390:
- fix sigp sense/start/stop/inconsistency
- cleanups
x86:
- Clean up some function prototypes more
- improved gfn_to_pfn_cache with proper invalidation, used by Xen
emulation
- add KVM_IRQ_ROUTING_XEN_EVTCHN and event channel delivery
- completely remove potential TOC/TOU races in nested SVM consistency
checks
- update some PMCs on emulated instructions
- Intel AMX support (joint work between Thomas and Intel)
- large MMU cleanups
- module parameter to disable PMU virtualization
- cleanup register cache
- first part of halt handling cleanups
- Hyper-V enlightened MSR bitmap support for nested hypervisors
Generic:
- clean up Makefiles
- introduce CONFIG_HAVE_KVM_DIRTY_RING
- optimize memslot lookup using a tree
- optimize vCPU array usage by converting to xarray"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (268 commits)
x86/fpu: Fix inline prefix warnings
selftest: kvm: Add amx selftest
selftest: kvm: Move struct kvm_x86_state to header
selftest: kvm: Reorder vcpu_load_state steps for AMX
kvm: x86: Disable interception for IA32_XFD on demand
x86/fpu: Provide fpu_sync_guest_vmexit_xfd_state()
kvm: selftests: Add support for KVM_CAP_XSAVE2
kvm: x86: Add support for getting/setting expanded xstate buffer
x86/fpu: Add uabi_size to guest_fpu
kvm: x86: Add CPUID support for Intel AMX
kvm: x86: Add XCR0 support for Intel AMX
kvm: x86: Disable RDMSR interception of IA32_XFD_ERR
kvm: x86: Emulate IA32_XFD_ERR for guest
kvm: x86: Intercept #NM for saving IA32_XFD_ERR
x86/fpu: Prepare xfd_err in struct fpu_guest
kvm: x86: Add emulation for IA32_XFD
x86/fpu: Provide fpu_update_guest_xfd() for IA32_XFD emulation
kvm: x86: Enable dynamic xfeatures at KVM_SET_CPUID2
x86/fpu: Provide fpu_enable_guest_xfd_features() for KVM
x86/fpu: Add guest support to xfd_enable_feature()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Borislav Petkov:
"Cleanup of the perf/kvm interaction."
* tag 'perf_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Drop guest callback (un)register stubs
KVM: arm64: Drop perf.c and fold its tiny bits of code into arm.c
KVM: arm64: Hide kvm_arm_pmu_available behind CONFIG_HW_PERF_EVENTS=y
KVM: arm64: Convert to the generic perf callbacks
KVM: x86: Move Intel Processor Trace interrupt handler to vmx.c
KVM: Move x86's perf guest info callbacks to generic KVM
KVM: x86: More precisely identify NMI from guest when handling PMI
KVM: x86: Drop current_vcpu for kvm_running_vcpu + kvm_arch_vcpu variable
perf/core: Use static_call to optimize perf_guest_info_callbacks
perf: Force architectures to opt-in to guest callbacks
perf: Add wrappers for invoking guest callbacks
perf/core: Rework guest callbacks to prepare for static_call support
perf: Drop dead and useless guest "support" from arm, csky, nds32 and riscv
perf: Stop pretending that perf can handle multiple guest callbacks
KVM: x86: Register Processor Trace interrupt hook iff PT enabled in guest
KVM: x86: Register perf callbacks after calling vendor's hardware_setup()
perf: Protect perf_guest_cbs with RCU
|
|
This can be used in two modes. There is an atomic mode where the cached
mapping is accessed while holding the rwlock, and a mode where the
physical address is used by a vCPU in guest mode.
For the latter case, an invalidation will wake the vCPU with the new
KVM_REQ_GPC_INVALIDATE, and the architecture will need to refresh any
caches it still needs to access before entering guest mode again.
Only one vCPU can be targeted by the wake requests; it's simple enough
to make it wake all vCPUs or even a mask but I don't see a use case for
that additional complexity right now.
Invalidation happens from the invalidate_range_start MMU notifier, which
needs to be able to sleep in order to wake the vCPU and wait for it.
This means that revalidation potentially needs to "wait" for the MMU
operation to complete and the invalidate_range_end notifier to be
invoked. Like the vCPU when it takes a page fault in that period, we
just spin — fixing that in a future patch by implementing an actual
*wait* may be another part of shaving this particularly hirsute yak.
As noted in the comments in the function itself, the only case where
the invalidate_range_start notifier is expected to be called *without*
being able to sleep is when the OOM reaper is killing the process. In
that case, we expect the vCPU threads already to have exited, and thus
there will be nothing to wake, and no reason to wait. So we clear the
KVM_REQUEST_WAIT bit and send the request anyway, then complain loudly
if there actually *was* anything to wake up.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20211210163625.2886-3-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The various kvm_write_guest() and mark_page_dirty() functions must only
ever be called in the context of an active vCPU, because if dirty ring
tracking is enabled it may simply oops when kvm_get_running_vcpu()
returns NULL for the vcpu and then kvm_dirty_ring_get() dereferences it.
This oops was reported by "butt3rflyh4ck" <butterflyhuangxx@gmail.com> in
https://lore.kernel.org/kvm/CAFcO6XOmoS7EacN_n6v4Txk7xL7iqRa2gABg3F7E3Naf5uG94g@mail.gmail.com/
That actual bug will be fixed under separate cover but this warning
should help to prevent new ones from being added.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20211210163625.2886-2-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Splitting kvm_main.c out into smaller and better-organized files is
slightly non-trivial when it involves editing a bunch of per-arch
KVM makefiles. Provide virt/kvm/Makefile.kvm for them to include.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20211121125451.9489-3-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
I'd like to make the build include dirty_ring.c based on whether the
arch wants it or not. That's a whole lot simpler if there's a config
symbol instead of doing it implicitly on KVM_DIRTY_LOG_PAGE_OFFSET
being set to something non-zero.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20211121125451.9489-2-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add helpers to wake and query a blocking vCPU. In addition to providing
nice names, the helpers reduce the probability of KVM neglecting to use
kvm_arch_vcpu_get_wait().
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-20-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Calculate the halt-polling "stop" time using "start" instead of redoing
ktime_get(). In practice, the numbers involved are in the noise (e.g.,
in the happy case where hardware correctly predicts do_halt_poll and
there are no interrupts, "start" is probably only a few cycles old)
and either approach is perfectly ok. But it's more precise to count
any extra latency toward the halt-polling time.
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-17-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add a "blocking" stat that userspace can use to detect the case where a
vCPU is not being run because of an vCPU/guest action, e.g. HLT or WFS on
x86, WFI on arm64, etc... Current guest/host/halt stats don't show this
well, e.g. if a guest halts for a long period of time then the vCPU could
could appear pathologically blocked due to a host condition, when in
reality the vCPU has been put into a not-runnable state by the guest.
Originally-by: Cannon Matthews <cannonmatthews@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Jing Zhang <jingzhangos@google.com>
[sean: renamed stat to "blocking", massaged changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-16-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Factor out the "block" part of kvm_vcpu_halt() so that x86 can emulate
non-halt wait/sleep/block conditions that should not be subjected to
halt-polling.
No functional change intended.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-15-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Rename kvm_vcpu_block() to kvm_vcpu_halt() in preparation for splitting
the actual "block" sequences into a separate helper (to be named
kvm_vcpu_block()). x86 will use the standalone block-only path to handle
non-halt cases where the vCPU is not runnable.
Rename block_ns to halt_ns to match the new function name.
No functional change intended.
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-14-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Drop kvm_arch_vcpu_block_finish() now that all arch implementations are
nops.
No functional change intended.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Invoke the arch hooks for block+unblock if and only if KVM actually
attempts to block the vCPU. The only non-nop implementation is on x86,
specifically SVM's AVIC, and there is no need to put the AVIC prior to
halt-polling; KVM x86's kvm_vcpu_has_events() will scour the full vIRR
to find pending IRQs regardless of whether the AVIC is loaded/"running".
The primary motivation is to allow future cleanup to split out "block"
from "halt", but this is also likely a small performance boost on x86 SVM
when halt-polling is successful.
Adjust the post-block path to update "cur" after unblocking, i.e. include
AVIC load time in halt_wait_ns and halt_wait_hist, so that the behavior
is consistent. Moving just the pre-block arch hook would result in only
the AVIC put latency being included in the halt_wait stats. There is no
obvious evidence that one way or the other is correct, so just ensure KVM
is consistent.
Note, x86 has two separate paths for handling APICv with respect to vCPU
blocking. VMX uses hooks in x86's vcpu_block(), while SVM uses the arch
hooks in kvm_vcpu_block(). Prior to this path, the two paths were more
or less functionally identical. That is very much not the case after
this patch, as the hooks used by VMX _must_ fire before halt-polling.
x86's entire mess will be cleaned up in future patches.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-12-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Move the halt-polling "success" and histogram stats update into the
dedicated helper to fix a discrepancy where the success/fail "time" stats
consider polling successful so long as the wait is avoided, but the main
"success" and histogram stats consider polling successful if and only if
a wake event was detected by the halt-polling loop.
Move halt_attempted_poll to the helper as well so that all the stats are
updated in a single location. While it's a bit odd to update the stat
well after the fact, practically speaking there's no meaningful advantage
to updating before polling.
Note, there is a functional change in addition to the success vs. fail
change. The histogram updates previously called ktime_get() instead of
using "cur". But that change is desirable as it means all the stats are
now updated with the same polling time, and avoids the extra ktime_get(),
which isn't expensive but isn't free either.
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add a comment to document that halt-polling is considered successful even
if the polling loop itself didn't detect a wake event, i.e. if a wake
event was detect in the final kvm_vcpu_check_block(). Invert the param
to update helper so that the helper is a dumb function that is "told"
whether or not polling was successful, as opposed to determining success
based on blocking behavior.
Opportunistically tweak the params to the update helper to reduce the
line length for the call site so that it fits on a single line, and so
that the prototype conforms to the more traditional kernel style.
No functional change intended.
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Don't update halt-polling stats if halt-polling wasn't attempted. This is
a nop as @poll_ns is guaranteed to be '0' (poll_end == start); in a future
patch (to move the histogram stats into the helper), it will avoid to
avoid a discrepancy in what is considered a "successful" halt-poll.
No functional change intended.
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Do not define/reference kvm_vcpu.wait if __KVM_HAVE_ARCH_WQP is true, and
instead force the architecture (PPC) to define its own rcuwait object.
Allowing common KVM to directly access vcpu->wait without a guard makes
it all too easy to introduce potential bugs, e.g. kvm_vcpu_block(),
kvm_vcpu_on_spin(), and async_pf_execute() all operate on vcpu->wait, not
the result of kvm_arch_vcpu_get_wait(), and so may do the wrong thing for
PPC.
Due to PPC's shenanigans with respect to callbacks and waits (it switches
to the virtual core's wait object at KVM_RUN!?!?), it's not clear whether
or not this fixes any bugs.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Wrap s390's halt_poll_max_steal with READ_ONCE and snapshot the result of
kvm_arch_no_poll() in kvm_vcpu_block() to avoid a mostly-theoretical,
largely benign bug on s390 where the result of kvm_arch_no_poll() could
change due to userspace modifying halt_poll_max_steal while the vCPU is
blocking. The bug is largely benign as it will either cause KVM to skip
updating halt-polling times (no_poll toggles false=>true) or to update
halt-polling times with a slightly flawed block_ns.
Note, READ_ONCE is unnecessary in the current code, add it in case the
arch hook is ever inlined, and to provide a hint that userspace can
change the param at will.
Fixes: 8b905d28ee17 ("KVM: s390: provide kvm_arch_no_poll function")
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
If we do have the vcpu mutex, as is the case if kvm_running_vcpu is set
to the target vcpu of the kick, changes to vcpu->mode do not need atomic
operations; cmpxchg is only needed _outside_ the mutex to ensure that
the IN_GUEST_MODE->EXITING_GUEST_MODE change does not race with the vcpu
thread going OUTSIDE_GUEST_MODE.
Use this to optimize the case of a vCPU sending an interrupt to itself.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
In preparation for implementing in-place hugepage promotion, various
functions will need to be called from zap_collapsible_spte_range, which
has the const qualifier on its memslot argument. Propagate the const
qualifier to the various functions which will be needed. This just serves
to simplify the following patch.
No functional change intended.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20211115234603.2908381-11-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Allocate the "new" memslot for !DELETE memslot updates straight away
instead of filling an intermediate on-stack object and forcing
kvm_set_memslot() to juggle the allocation and do weird things like reuse
the old memslot object in MOVE.
In the MOVE case, this results in an "extra" memslot allocation due to
allocating both the "new" slot and the "invalid" slot, but that's a
temporary and not-huge allocation, and MOVE is a relatively rare memslot
operation.
Regarding MOVE, drop the open-coded management of the gfn tree with a
call to kvm_replace_memslot(), which already handles the case where
new->base_gfn != old->base_gfn. This is made possible by virtue of not
having to copy the "new" memslot data after erasing the old memslot from
the gfn tree. Using kvm_replace_memslot(), and more specifically not
reusing the old memslot, means the MOVE case now does hva tree and hash
list updates, but that's a small price to pay for simplifying the code
and making MOVE align with all the other flavors of updates. The "extra"
updates are firmly in the noise from a performance perspective, e.g. the
"move (in)active area" selfttests show a (very, very) slight improvement.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <f0d8c72727aa825cf682bd4e3da4b3fa68215dd4.1638817641.git.maciej.szmigiero@oracle.com>
|
|
Initialize the "new" memslot in the !DELETE path only after the various
sanity checks have passed. This will allow a future commit to allocate
@new dynamically without having to copy a memslot, and without having to
deal with freeing @new in error paths and in the "nothing to change" path
that's hiding in the sanity checks.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <a084d0531ca3a826a7f861eb2b08b5d1c06ef265.1638817641.git.maciej.szmigiero@oracle.com>
|
|
Do a quick lookup for possibly overlapping gfns when creating or moving
a memslot instead of performing a linear scan of the whole memslot set.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
[sean: tweaked params to avoid churn in future cleanup]
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <a4795e5c2f624754e9c0aab023ebda1966feb3e1.1638817641.git.maciej.szmigiero@oracle.com>
|
|
kvm_invalidate_memslot()
kvm_invalidate_memslot() calls kvm_arch_flush_shadow_memslot() on the
active, but KVM_MEMSLOT_INVALID slot.
Do it on the inactive (but valid) old slot instead since arch code really
should not get passed such invalid slot.
Note that this means that the "arch" field of the slot provided to
kvm_arch_flush_shadow_memslot() may have stale data since this function
is called with slots_arch_lock released.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <813595ecc193d6ae39a87709899d4251523b05f8.1638817641.git.maciej.szmigiero@oracle.com>
|
|
The current memslot code uses a (reverse gfn-ordered) memslot array for
keeping track of them.
Because the memslot array that is currently in use cannot be modified
every memslot management operation (create, delete, move, change flags)
has to make a copy of the whole array so it has a scratch copy to work on.
Strictly speaking, however, it is only necessary to make copy of the
memslot that is being modified, copying all the memslots currently present
is just a limitation of the array-based memslot implementation.
Two memslot sets, however, are still needed so the VM continues to run
on the currently active set while the requested operation is being
performed on the second, currently inactive one.
In order to have two memslot sets, but only one copy of actual memslots
it is necessary to split out the memslot data from the memslot sets.
The memslots themselves should be also kept independent of each other
so they can be individually added or deleted.
These two memslot sets should normally point to the same set of
memslots. They can, however, be desynchronized when performing a
memslot management operation by replacing the memslot to be modified
by its copy. After the operation is complete, both memslot sets once
again point to the same, common set of memslot data.
This commit implements the aforementioned idea.
For tracking of gfns an ordinary rbtree is used since memslots cannot
overlap in the guest address space and so this data structure is
sufficient for ensuring that lookups are done quickly.
The "last used slot" mini-caches (both per-slot set one and per-vCPU one),
that keep track of the last found-by-gfn memslot, are still present in the
new code.
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <17c0cf3663b760a0d3753d4ac08c0753e941b811.1638817641.git.maciej.szmigiero@oracle.com>
|
|
The current memslots implementation only allows quick binary search by gfn,
quick lookup by hva is not possible - the implementation has to do a linear
scan of the whole memslots array, even though the operation being performed
might apply just to a single memslot.
This significantly hurts performance of per-hva operations with higher
memslot counts.
Since hva ranges can overlap between memslots an interval tree is needed
for tracking them.
[sean: handle interval tree updates in kvm_replace_memslot()]
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <d66b9974becaa9839be9c4e1a5de97b177b4ac20.1638817640.git.maciej.szmigiero@oracle.com>
|
|
Memslot ID to the corresponding memslot mappings are currently kept as
indices in static id_to_index array.
The size of this array depends on the maximum allowed memslot count
(regardless of the number of memslots actually in use).
This has become especially problematic recently, when memslot count cap was
removed, so the maximum count is now full 32k memslots - the maximum
allowed by the current KVM API.
Keeping these IDs in a hash table (instead of an array) avoids this
problem.
Resolving a memslot ID to the actual memslot (instead of its index) will
also enable transitioning away from an array-based implementation of the
whole memslots structure in a later commit.
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <117fb2c04320e6cd6cf34f205a72eadb0aa8d5f9.1638817640.git.maciej.szmigiero@oracle.com>
|
|
Since kvm_memslot_move_forward() can theoretically return a negative
memslot index even when kvm_memslot_move_backward() returned a positive one
(and so did not WARN) let's just move the warning to the common code.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <eeed890ccb951e7b0dce15bc170eb2661d5b02da.1638817640.git.maciej.szmigiero@oracle.com>
|
|
s390 arch has gfn_to_memslot_approx() which is almost identical to
search_memslots(), differing only in that in case the gfn falls in a hole
one of the memslots bordering the hole is returned.
Add this lookup mode as an option to search_memslots() so we don't have two
almost identical functions for looking up a memslot by its gfn.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
[sean: tweaked helper names to keep gfn_to_memslot_approx() in s390]
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <171cd89b52c718dbe180ecd909b4437a64a7e2ec.1638817640.git.maciej.szmigiero@oracle.com>
|
|
Stop making a full copy of the old memslot in __kvm_set_memory_region()
now that metadata updates are handled by kvm_set_memslot(), i.e. now that
the old memslot's dirty bitmap doesn't need to be referenced after the
memslot and its pointer is modified/invalidated by kvm_set_memslot().
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <5dce0946b41bba8c83f6e3424c6955c56bcc9f86.1638817640.git.maciej.szmigiero@oracle.com>
|
|
Handle the generic memslot metadata, a.k.a. dirty bitmap, updates at the
same time that arch handles it's own metadata updates, i.e. at memslot
prepare and commit. This will simplify converting @new to a dynamically
allocated object, and more closely aligns common KVM with architecture
code.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <2ddd5446e3706fe3c1e52e3df279f04c458be830.1638817640.git.maciej.szmigiero@oracle.com>
|
|
Drop the @mem param from kvm_arch_{prepare,commit}_memory_region() now
that its use has been removed in all architectures.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <aa5ed3e62c27e881d0d8bc0acbc1572bc336dc19.1638817640.git.maciej.szmigiero@oracle.com>
|
|
Pass the "old" slot to kvm_arch_prepare_memory_region() and force arch
code to handle propagating arch specific data from "new" to "old" when
necessary. This is a baby step towards dynamically allocating "new" from
the get go, and is a (very) minor performance boost on x86 due to not
unnecessarily copying arch data.
For PPC HV, copy the rmap in the !CREATE and !DELETE paths, i.e. for MOVE
and FLAGS_ONLY. This is functionally a nop as the previous behavior
would overwrite the pointer for CREATE, and eventually discard/ignore it
for DELETE.
For x86, copy the arch data only for FLAGS_ONLY changes. Unlike PPC HV,
x86 needs to reallocate arch data in the MOVE case as the size of x86's
allocations depend on the alignment of the memslot's gfn.
Opportunistically tweak kvm_arch_prepare_memory_region()'s param order to
match the "commit" prototype.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
[mss: add missing RISCV kvm_arch_prepare_memory_region() change]
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <67dea5f11bbcfd71e3da5986f11e87f5dd4013f9.1638817639.git.maciej.szmigiero@oracle.com>
|
|
Now that the address space ID is stored in every slot, including fake
slots used for deletion, use the slot's as_id instead of passing in the
redundant information as a param to kvm_set_memslot(). This will greatly
simplify future memslot work by avoiding passing a large number of
variables around purely to honor @as_id.
Drop a comment in the DELETE path about new->as_id being provided purely
for debug, as that's now a lie.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <03189577be214ab8530a4b3a3ee3ed1c2f9e5815.1638817639.git.maciej.szmigiero@oracle.com>
|
|
There is no need to copy the whole memslot data after releasing
slots_arch_lock for a moment to install temporary memslots copy in
kvm_set_memslot() since this lock only protects the arch field of each
memslot.
Just resync this particular field after reacquiring slots_arch_lock.
Note, this also eliminates the need to manually clear the INVALID flag
when restoring memslots; the "setting" of the INVALID flag was an
unwanted side effect of copying the entire memslots.
Since kvm_copy_memslots() has just one caller remaining now
open-code it instead.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
[sean: tweak shortlog, note INVALID flag in changelog, revert comment]
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <b63035d114707792e9042f074478337f770dff6a.1638817638.git.maciej.szmigiero@oracle.com>
|
|
Fold kvm_delete_memslot() into __kvm_set_memory_region() to free up the
"kvm_delete_memslot()" name for use in a future helper. The delete logic
isn't so complex/long that it truly needs a helper, and it will be
simplified a wee bit further in upcoming commits.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <2887631c31a82947faa488ab72f55f8c68b7c194.1638817638.git.maciej.szmigiero@oracle.com>
|
|
Explicitly disallow creating more memslot pages than can fit in an
unsigned long, KVM doesn't correctly handle a total number of memslot
pages that doesn't fit in an unsigned long and remedying that would be a
waste of time.
For a 64-bit kernel, this is a nop as memslots are not allowed to overlap
in the gfn address space.
With a 32-bit kernel, userspace can at most address 3gb of virtual memory,
whereas wrapping the total number of pages would require 4tb+ of guest
physical memory. Even with x86's second address space for SMM, userspace
would need to alias all of guest memory more than one _thousand_ times.
And on older x86 hardware with MAXPHYADDR < 43, the guest couldn't
actually access any of those aliases even if userspace lied about
guest.MAXPHYADDR.
On 390 and arm64, this is a nop as they don't support 32-bit hosts.
On x86, practically speaking this is simply acknowledging reality as the
existing kvm_mmu_calculate_default_mmu_pages() assumes the total number
of pages fits in an "unsigned long".
On PPC, this is likely a nop as every flavor of PPC KVM assumes gfns (and
gpas!) fit in unsigned long. arch/powerpc/kvm/book3s_32_mmu_host.c goes
a step further and fails the build if CONFIG_PTE_64BIT=y, which
presumably means that it does't support 64-bit physical addresses.
On MIPS, this is also likely a nop as the core MMU helpers assume gpas
fit in unsigned long, e.g. see kvm_mips_##name##_pte.
And finally, RISC-V is a "don't care" as it doesn't exist in any release,
i.e. there is no established ABI to break.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <1c2c91baf8e78acccd4dad38da591002e61c013c.1638817638.git.maciej.szmigiero@oracle.com>
|
|
Everywhere we use kvm_for_each_vpcu(), we use an int as the vcpu
index. Unfortunately, we're about to move rework the iterator,
which requires this to be upgrade to an unsigned long.
Let's bite the bullet and repaint all of it in one go.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20211116160403.4074052-7-maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
At least on arm64 and x86, the vcpus array is pretty huge (up to
1024 entries on x86) and is mostly empty in the majority of the cases
(running 1k vcpu VMs is not that common).
This mean that we end-up with a 4kB block of unused memory in the
middle of the kvm structure.
Instead of wasting away this memory, let's use an xarray instead,
which gives us almost the same flexibility as a normal array, but
with a reduced memory usage with smaller VMs.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20211116160403.4074052-6-maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
All architectures have similar loops iterating over the vcpus,
freeing one vcpu at a time, and eventually wiping the reference
off the vcpus array. They are also inconsistently taking
the kvm->lock mutex when wiping the references from the array.
Make this code common, which will simplify further changes.
The locking is dropped altogether, as this should only be called
when there is no further references on the kvm structure.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20211116160403.4074052-2-maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This is not an unrecoverable situation. Users of kvm_read_guest_offset_cached
and kvm_write_guest_offset_cached must expect the read/write to fail, and
therefore it is possible to just return early with an error value.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
