summaryrefslogtreecommitdiffstats
path: root/virt
AgeCommit message (Collapse)AuthorFilesLines
2017-07-06Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds15-150/+1297
Pull KVM updates from Paolo Bonzini: "PPC: - Better machine check handling for HV KVM - Ability to support guests with threads=2, 4 or 8 on POWER9 - Fix for a race that could cause delayed recognition of signals - Fix for a bug where POWER9 guests could sleep with interrupts pending. ARM: - VCPU request overhaul - allow timer and PMU to have their interrupt number selected from userspace - workaround for Cavium erratum 30115 - handling of memory poisonning - the usual crop of fixes and cleanups s390: - initial machine check forwarding - migration support for the CMMA page hinting information - cleanups and fixes x86: - nested VMX bugfixes and improvements - more reliable NMI window detection on AMD - APIC timer optimizations Generic: - VCPU request overhaul + documentation of common code patterns - kvm_stat improvements" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (124 commits) Update my email address kvm: vmx: allow host to access guest MSR_IA32_BNDCFGS x86: kvm: mmu: use ept a/d in vmcs02 iff used in vmcs12 kvm: x86: mmu: allow A/D bits to be disabled in an mmu x86: kvm: mmu: make spte mmio mask more explicit x86: kvm: mmu: dead code thanks to access tracking KVM: PPC: Book3S: Fix typo in XICS-on-XIVE state saving code KVM: PPC: Book3S HV: Close race with testing for signals on guest entry KVM: PPC: Book3S HV: Simplify dynamic micro-threading code KVM: x86: remove ignored type attribute KVM: LAPIC: Fix lapic timer injection delay KVM: lapic: reorganize restart_apic_timer KVM: lapic: reorganize start_hv_timer kvm: nVMX: Check memory operand to INVVPID KVM: s390: Inject machine check into the nested guest KVM: s390: Inject machine check into the guest tools/kvm_stat: add new interactive command 'b' tools/kvm_stat: add new command line switch '-i' tools/kvm_stat: fix error on interactive command 'g' KVM: SVM: suppress unnecessary NMI singlestep on GIF=0 and nested exit ...
2017-07-05Merge tag 'arm64-upstream' of ↵Linus Torvalds1-3/+33
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: - RAS reporting via GHES/APEI (ACPI) - Indirect ftrace trampolines for modules - Improvements to kernel fault reporting - Page poisoning - Sigframe cleanups and preparation for SVE context - Core dump fixes - Sparse fixes (mainly relating to endianness) - xgene SoC PMU v3 driver - Misc cleanups and non-critical fixes * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (75 commits) arm64: fix endianness annotation for 'struct jit_ctx' and friends arm64: cpuinfo: constify attribute_group structures. arm64: ptrace: Fix incorrect get_user() use in compat_vfp_set() arm64: ptrace: Remove redundant overrun check from compat_vfp_set() arm64: ptrace: Avoid setting compat FP[SC]R to garbage if get_user fails arm64: fix endianness annotation for __apply_alternatives()/get_alt_insn() arm64: fix endianness annotation in get_kaslr_seed() arm64: add missing conversion to __wsum in ip_fast_csum() arm64: fix endianness annotation in acpi_parking_protocol.c arm64: use readq() instead of readl() to read 64bit entry_point arm64: fix endianness annotation for reloc_insn_movw() & reloc_insn_imm() arm64: fix endianness annotation for aarch64_insn_write() arm64: fix endianness annotation in aarch64_insn_read() arm64: fix endianness annotation in call_undef_hook() arm64: fix endianness annotation for debug-monitors.c ras: mark stub functions as 'inline' arm64: pass endianness info to sparse arm64: ftrace: fix !CONFIG_ARM64_MODULE_PLTS kernels arm64: signal: Allow expansion of the signal frame acpi: apei: check for pending errors when probing GHES entries ...
2017-06-30Merge tag 'kvmarm-for-4.13' of ↵Paolo Bonzini16-171/+1372
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/ARM updates for 4.13 - vcpu request overhaul - allow timer and PMU to have their interrupt number selected from userspace - workaround for Cavium erratum 30115 - handling of memory poisonning - the usual crop of fixes and cleanups Conflicts: arch/s390/include/asm/kvm_host.h
2017-06-27KVM: explain missing kvm_put_kvm in case of failurePaolo Bonzini1-0/+6
The call to kvm_put_kvm was removed from error handling in commit 506cfba9e726 ("KVM: don't use anon_inode_getfd() before possible failures"), but it is _not_ a memory leak. Reuse Al's explanation to avoid that someone else makes the same mistake. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-27KVM: Replaces symbolic permissions with numericRoman Storozhenko1-3/+3
Replaces "S_IRUGO | S_IWUSR" with 0644. The reason is that symbolic permissions considered harmful: https://lwn.net/Articles/696229/ Signed-off-by: Roman Storozhenko <romeusmeister@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-22arm/arm64: KVM: add guest SEA supportTyler Baicar1-3/+33
Currently external aborts are unsupported by the guest abort handling. Add handling for SEAs so that the host kernel reports SEAs which occur in the guest kernel. When an SEA occurs in the guest kernel, the guest exits and is routed to kvm_handle_guest_abort(). Prior to this patch, a print message of an unsupported FSC would be printed and nothing else would happen. With this patch, the code gets routed to the APEI handling of SEAs in the host kernel to report the SEA information. Signed-off-by: Tyler Baicar <tbaicar@codeaurora.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-06-22KVM: arm/arm64: Signal SIGBUS when stage2 discovers hwpoison memoryJames Morse1-0/+23
Once we enable ARCH_SUPPORTS_MEMORY_FAILURE on arm64, notifications for broken memory can call memory_failure() in mm/memory-failure.c to offline pages of memory, possibly signalling user space processes and notifying all the in-kernel users. memory_failure() has two modes, early and late. Early is used by machine-managers like Qemu to receive a notification when a memory error is notified to the host. These can then be relayed to the guest before the affected page is accessed. To enable this, the process must set PR_MCE_KILL_EARLY in PR_MCE_KILL_SET using the prctl() syscall. Once the early notification has been handled, nothing stops the machine-manager or guest from accessing the affected page. If the machine-manager does this the page will fail to be mapped and SIGBUS will be sent. This patch adds the equivalent path for when the guest accesses the page, sending SIGBUS to the machine-manager. These two signals can be distinguished by the machine-manager using their si_code: BUS_MCEERR_AO for 'action optional' early notifications, and BUS_MCEERR_AR for 'action required' synchronous/late notifications. Do as x86 does, and deliver the SIGBUS when we discover pfn == KVM_PFN_ERR_HWPOISON. Use the hugepage size as si_addr_lsb if this vma was allocated as a hugepage. Transparent hugepages will be split by memory_failure() before we see them here. Cc: Punit Agrawal <punit.agrawal@arm.com> Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-06-20sched/wait: Rename wait_queue_t => wait_queue_entry_tIngo Molnar1-1/+1
Rename: wait_queue_t => wait_queue_entry_t 'wait_queue_t' was always a slight misnomer: its name implies that it's a "queue", but in reality it's a queue *entry*. The 'real' queue is the wait queue head, which had to carry the name. Start sorting this out by renaming it to 'wait_queue_entry_t'. This also allows the real structure name 'struct __wait_queue' to lose its double underscore and become 'struct wait_queue_entry', which is the more canonical nomenclature for such data types. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-15KVM: ARM64: fix phy counter access failure in guest.Hu Huajun1-3/+1
When reading the cntpct_el0 in guest with VHE (Virtual Host Extension) enabled in host, the "Unsupported guest sys_reg access" error reported. The reason is cnthctl_el2.EL1PCTEN is not enabled, which is expected to be done in kvm_timer_init_vhe(). The problem is kvm_timer_init_vhe is called by cpu_init_hyp_mode, and which is called when VHE is disabled. This patch remove the incorrect call to kvm_timer_init_vhe() from cpu_init_hyp_mode(), and calls kvm_timer_init_vhe() to enable cnthctl_el2.EL1PCTEN in cpu_hyp_reinit(). Fixes: 488f94d7212b ("KVM: arm64: Access CNTHCTL_EL2 bit fields correctly on VHE systems") Cc: stable@vger.kernel.org Signed-off-by: Hu Huajun <huhuajun@huawei.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15arm64/kvm: sysreg: fix typo'd SYS_ICC_IGRPEN*_EL1Mark Rutland1-2/+2
Per ARM DDI 0487B.a, the registers are named ICC_IGRPEN*_EL1 rather than ICC_GRPEN*_EL1. Correct our mnemonics and comments to match, before we add more GICv3 register definitions. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: kvmarm@lists.cs.columbia.edu Acked-by: Christoffer Dall <cdall@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15KVM: arm64: Log an error if trapping a write-to-read-only GICv3 accessMarc Zyngier1-0/+6
A write-to-read-only GICv3 access should UNDEF at EL1. But since we're in complete paranoia-land with broken CPUs, let's assume the worse and gracefully handle the case. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15KVM: arm64: Log an error if trapping a read-from-write-only GICv3 accessMarc Zyngier1-0/+4
A read-from-write-only GICv3 access should UNDEF at EL1. But since we're in complete paranoia-land with broken CPUs, let's assume the worse and gracefully handle the case. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15KVM: arm64: vgic-v3: Log which GICv3 system registers are trappedMarc Zyngier1-1/+4
In order to facilitate debug, let's log which class of GICv3 system registers are trapped. Tested-by: Alexander Graf <agraf@suse.de> Acked-by: David Daney <david.daney@cavium.com> Acked-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15KVM: arm64: Enable GICv3 common sysreg trapping via command-lineMarc Zyngier1-1/+10
Now that we're able to safely handle common sysreg access, let's give the user the opportunity to enable it by passing a specific command-line option (vgic_v3.common_trap). Tested-by: Alexander Graf <agraf@suse.de> Acked-by: David Daney <david.daney@cavium.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15KVM: arm64: vgic-v3: Add ICV_PMR_EL1 handlerMarc Zyngier1-0/+27
Add a handler for reading/writing the guest's view of the ICC_PMR_EL1 register, which is located in the ICH_VMCR_EL2.VPMR field. Tested-by: Alexander Graf <agraf@suse.de> Acked-by: David Daney <david.daney@cavium.com> Acked-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15KVM: arm64: vgic-v3: Add ICV_CTLR_EL1 handlerMarc Zyngier1-0/+46
Add a handler for reading/writing the guest's view of the ICV_CTLR_EL1 register. only EOIMode and CBPR are of interest here, as all the other bits directly come from ICH_VTR_EL2 and are Read-Only. Tested-by: Alexander Graf <agraf@suse.de> Acked-by: David Daney <david.daney@cavium.com> Acked-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15KVM: arm64: vgic-v3: Add ICV_RPR_EL1 handlerMarc Zyngier1-0/+10
Add a handler for reading the guest's view of the ICV_RPR_EL1 register, returning the highest active priority. Tested-by: Alexander Graf <agraf@suse.de> Acked-by: David Daney <david.daney@cavium.com> Acked-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15KVM: arm64: vgic-v3: Add ICV_DIR_EL1 handlerMarc Zyngier1-0/+27
Add a handler for writing the guest's view of the ICC_DIR_EL1 register, performing the deactivation of an interrupt if EOImode is set ot 1. Tested-by: Alexander Graf <agraf@suse.de> Acked-by: David Daney <david.daney@cavium.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15arm64: Add workaround for Cavium Thunder erratum 30115David Daney1-0/+7
Some Cavium Thunder CPUs suffer a problem where a KVM guest may inadvertently cause the host kernel to quit receiving interrupts. Use the Group-0/1 trapping in order to deal with it. [maz]: Adapted patch to the Group-0/1 trapping, reworked commit log Tested-by: Alexander Graf <agraf@suse.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15KVM: arm64: Enable GICv3 Group-0 sysreg trapping via command-lineMarc Zyngier1-0/+6
Now that we're able to safely handle Group-0 sysreg access, let's give the user the opportunity to enable it by passing a specific command-line option (vgic_v3.group0_trap). Tested-by: Alexander Graf <agraf@suse.de> Acked-by: David Daney <david.daney@cavium.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15KVM: arm64: vgic-v3: Enable trapping of Group-0 system registersMarc Zyngier1-1/+4
In order to be able to trap Group-0 GICv3 system registers, we need to set ICH_HCR_EL2.TALL0 begore entering the guest. This is conditionnaly done after having restored the guest's state, and cleared on exit. Tested-by: Alexander Graf <agraf@suse.de> Acked-by: David Daney <david.daney@cavium.com> Acked-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15KVM: arm64: vgic-v3: Add misc Group-0 handlersMarc Zyngier1-0/+7
A number of Group-0 registers can be handled by the same accessors as that of Group-1, so let's add the required system register encodings and catch them in the dispatching function. Tested-by: Alexander Graf <agraf@suse.de> Acked-by: David Daney <david.daney@cavium.com> Acked-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15KVM: arm64: vgic-v3: Add ICV_IGNREN0_EL1 handlerMarc Zyngier1-0/+23
Add a handler for reading/writing the guest's view of the ICC_IGRPEN0_EL1 register, which is located in the ICH_VMCR_EL2.VENG0 field. Tested-by: Alexander Graf <agraf@suse.de> Acked-by: David Daney <david.daney@cavium.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15KVM: arm64: vgic-v3: Add ICV_BPR0_EL1 handlerMarc Zyngier1-0/+28
Add a handler for reading/writing the guest's view of the ICC_BPR0_EL1 register, which is located in the ICH_VMCR_EL2.BPR0 field. Tested-by: Alexander Graf <agraf@suse.de> Acked-by: David Daney <david.daney@cavium.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15KVM: arm64: Enable GICv3 Group-1 sysreg trapping via command-lineMarc Zyngier1-0/+11
Now that we're able to safely handle Group-1 sysreg access, let's give the user the opportunity to enable it by passing a specific command-line option (vgic_v3.group1_trap). Tested-by: Alexander Graf <agraf@suse.de> Acked-by: David Daney <david.daney@cavium.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15KVM: arm64: vgic-v3: Enable trapping of Group-1 system registersMarc Zyngier2-0/+15
In order to be able to trap Group-1 GICv3 system registers, we need to set ICH_HCR_EL2.TALL1 before entering the guest. This is conditionally done after having restored the guest's state, and cleared on exit. Tested-by: Alexander Graf <agraf@suse.de> Acked-by: David Daney <david.daney@cavium.com> Acked-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15KVM: arm64: vgic-v3: Add ICV_HPPIR1_EL1 handlerMarc Zyngier1-0/+23
Add a handler for reading the guest's view of the ICV_HPPIR1_EL1 register. This is a simple parsing of the available LRs, extracting the highest available interrupt. Tested-by: Alexander Graf <agraf@suse.de> Acked-by: David Daney <david.daney@cavium.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15KVM: arm64: vgic-v3: Add ICV_AP1Rn_EL1 handlerMarc Zyngier1-0/+94
Add a handler for reading/writing the guest's view of the ICV_AP1Rn_EL1 registers. We just map them to the corresponding ICH_AP1Rn_EL2 registers. Tested-by: Alexander Graf <agraf@suse.de> Acked-by: David Daney <david.daney@cavium.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15KVM: arm64: vgic-v3: Add ICV_EOIR1_EL1 handlerMarc Zyngier1-0/+120
Add a handler for writing the guest's view of the ICC_EOIR1_EL1 register. This involves dropping the priority of the interrupt, and deactivating it if required (EOImode == 0). Tested-by: Alexander Graf <agraf@suse.de> Acked-by: David Daney <david.daney@cavium.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15KVM: arm64: vgic-v3: Add ICV_IAR1_EL1 handlerMarc Zyngier1-0/+163
Add a handler for reading the guest's view of the ICC_IAR1_EL1 register. This involves finding the highest priority Group-1 interrupt, checking against both PMR and the active group priority, activating the interrupt and setting the group priority as active. Tested-by: Alexander Graf <agraf@suse.de> Acked-by: David Daney <david.daney@cavium.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15KVM: arm64: vgic-v3: Add ICV_IGRPEN1_EL1 handlerMarc Zyngier1-0/+23
Add a handler for reading/writing the guest's view of the ICC_IGRPEN1_EL1 register, which is located in the ICH_VMCR_EL2.VENG1 field. Tested-by: Alexander Graf <agraf@suse.de> Acked-by: David Daney <david.daney@cavium.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15KVM: arm64: vgic-v3: Add ICV_BPR1_EL1 handlerMarc Zyngier1-0/+57
Add a handler for reading/writing the guest's view of the ICC_BPR1_EL1 register, which is located in the ICH_VMCR_EL2.BPR1 field. Tested-by: Alexander Graf <agraf@suse.de> Acked-by: David Daney <david.daney@cavium.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15KVM: arm64: vgic-v3: Add hook to handle guest GICv3 sysreg accesses at EL2Marc Zyngier2-0/+40
In order to start handling guest access to GICv3 system registers, let's add a hook that will get called when we trap a system register access. This is gated by a new static key (vgic_v3_cpuif_trap). Tested-by: Alexander Graf <agraf@suse.de> Acked-by: David Daney <david.daney@cavium.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15KVM: arm64: Make kvm_condition_valid32() accessible from EL2Marc Zyngier1-1/+1
As we're about to trap CP15 accesses and handle them at EL2, we need to evaluate whether or not the condition flags are valid, as an implementation is allowed to trap despite the condition not being met. Tagging the function as __hyp_text allows this. We still rely on the cc_map array to be mapped at EL2 by virtue of being "const", and the linker to only emit relative references. Tested-by: Alexander Graf <agraf@suse.de> Acked-by: David Daney <david.daney@cavium.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15KVM: arm/arm64: vgic-v3: Add accessors for the ICH_APxRn_EL2 registersMarc Zyngier1-16/+100
As we're about to access the Active Priority registers a lot more, let's define accessors that take the register number as a parameter. Tested-by: Alexander Graf <agraf@suse.de> Acked-by: David Daney <david.daney@cavium.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15Merge branch 'kvmarm-master/master' into HEADMarc Zyngier8-48/+140
2017-06-08KVM: arm/arm64: Don't assume initialized vgic when setting PMU IRQChristoffer Dall1-4/+18
The PMU IRQ number is set through the VCPU device's KVM_SET_DEVICE_ATTR ioctl handler for the KVM_ARM_VCPU_PMU_V3_IRQ attribute, but there is no enforced or stated requirement that this must happen after initializing the VGIC. As a result, calling vgic_valid_spi() which relies on the nr_spis being set during the VGIC init can incorrectly fail. Introduce irq_is_spi, which determines if an IRQ number is within the SPI range without verifying it against the actual VGIC properties. Signed-off-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
2017-06-08KVM: arm/arm64: Disallow userspace control of in-kernel IRQ linesChristoffer Dall5-9/+18
When injecting an IRQ to the VGIC, you now have to present an owner token for that IRQ line to show that you are the owner of that line. IRQ lines driven from userspace or via an irqfd do not have an owner and will simply pass a NULL pointer. Also get rid of the unused kvm_vgic_inject_mapped_irq prototype. Signed-off-by: Christoffer Dall <cdall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
2017-06-08KVM: arm/arm64: Check if irq lines to the GIC are already usedChristoffer Dall2-8/+17
We check if other in-kernel devices have already been connected to the GIC for a particular interrupt line when possible. For the PMU, we can do this whenever setting the PMU interrupt number from userspace. For the timers, we have to wait until we try to enable the timer, because we have a concept of default IRQ numbers that userspace shouldn't have to work around in the initialization phase. Signed-off-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
2017-06-08KVM: arm/arm64: Introduce an allocator for in-kernel irq linesChristoffer Dall1-0/+33
Having multiple devices being able to signal the same interrupt line is very confusing and almost certainly guarantees a configuration error. Therefore, introduce a very simple allocator which allows a device to claim an interrupt line from the vgic for a given VM. Signed-off-by: Christoffer Dall <cdall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
2017-06-08KVM: arm/arm64: Allow setting the timer IRQ numbers from userspaceChristoffer Dall1-0/+104
First we define an ABI using the vcpu devices that lets userspace set the interrupt numbers for the various timers on both the 32-bit and 64-bit KVM/ARM implementations. Second, we add the definitions for the groups and attributes introduced by the above ABI. (We add the PMU define on the 32-bit side as well for symmetry and it may get used some day.) Third, we set up the arch-specific vcpu device operation handlers to call into the timer code for anything related to the KVM_ARM_VCPU_TIMER_CTRL group. Fourth, we implement support for getting and setting the timer interrupt numbers using the above defined ABI in the arch timer code. Fifth, we introduce error checking upon enabling the arch timer (which is called when first running a VCPU) to check that all VCPUs are configured to use the same PPI for the timer (as mandated by the architecture) and that the virtual and physical timers are not configured to use the same IRQ number. Signed-off-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
2017-06-08KVM: arm/arm64: Move timer IRQ default init to arch_timer.cChristoffer Dall1-12/+16
We currently initialize the arch timer IRQ numbers from the reset code, presumably because we once intended to model multiple CPU or SoC types from within the kernel and have hard-coded reset values in the reset code. As we are moving towards userspace being in charge of more fine-grained CPU emulation and stitching together the pieces needed to emulate a particular type of CPU, we should no longer have a tight coupling between resetting a VCPU and setting IRQ numbers. Therefore, move the logic to define and use the default IRQ numbers to the timer code and set the IRQ number immediately when creating the VCPU. Signed-off-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
2017-06-08KVM: arm/arm64: Move irq_is_ppi() to header fileChristoffer Dall1-2/+0
We are about to need this define in the arch timer code as well so move it to a common location. Signed-off-by: Christoffer Dall <cdall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
2017-06-08KVM: arm64: Allow creating the PMU without the in-kernel GICChristoffer Dall2-12/+43
Since we got support for devices in userspace which allows reporting the PMU overflow output status to userspace, we should actually allow creating the PMU on systems without an in-kernel irqchip, which in turn requires us to slightly clarify error codes for the ABI and move things around for the initialization phase. Signed-off-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
2017-06-06KVM: arm/arm64: Handle possible NULL stage2 pud when ageing pagesMarc Zyngier1-0/+3
Under memory pressure, we start ageing pages, which amounts to parsing the page tables. Since we don't want to allocate any extra level, we pass NULL for our private allocation cache. Which means that stage2_get_pud() is allowed to fail. This results in the following splat: [ 1520.409577] Unable to handle kernel NULL pointer dereference at virtual address 00000008 [ 1520.417741] pgd = ffff810f52fef000 [ 1520.421201] [00000008] *pgd=0000010f636c5003, *pud=0000010f56f48003, *pmd=0000000000000000 [ 1520.429546] Internal error: Oops: 96000006 [#1] PREEMPT SMP [ 1520.435156] Modules linked in: [ 1520.438246] CPU: 15 PID: 53550 Comm: qemu-system-aar Tainted: G W 4.12.0-rc4-00027-g1885c397eaec #7205 [ 1520.448705] Hardware name: FOXCONN R2-1221R-A4/C2U4N_MB, BIOS G31FB12A 10/26/2016 [ 1520.463726] task: ffff800ac5fb4e00 task.stack: ffff800ce04e0000 [ 1520.469666] PC is at stage2_get_pmd+0x34/0x110 [ 1520.474119] LR is at kvm_age_hva_handler+0x44/0xf0 [ 1520.478917] pc : [<ffff0000080b137c>] lr : [<ffff0000080b149c>] pstate: 40000145 [ 1520.486325] sp : ffff800ce04e33d0 [ 1520.489644] x29: ffff800ce04e33d0 x28: 0000000ffff40064 [ 1520.494967] x27: 0000ffff27e00000 x26: 0000000000000000 [ 1520.500289] x25: ffff81051ba65008 x24: 0000ffff40065000 [ 1520.505618] x23: 0000ffff40064000 x22: 0000000000000000 [ 1520.510947] x21: ffff810f52b20000 x20: 0000000000000000 [ 1520.516274] x19: 0000000058264000 x18: 0000000000000000 [ 1520.521603] x17: 0000ffffa6fe7438 x16: ffff000008278b70 [ 1520.526940] x15: 000028ccd8000000 x14: 0000000000000008 [ 1520.532264] x13: ffff7e0018298000 x12: 0000000000000002 [ 1520.537582] x11: ffff000009241b93 x10: 0000000000000940 [ 1520.542908] x9 : ffff0000092ef800 x8 : 0000000000000200 [ 1520.548229] x7 : ffff800ce04e36a8 x6 : 0000000000000000 [ 1520.553552] x5 : 0000000000000001 x4 : 0000000000000000 [ 1520.558873] x3 : 0000000000000000 x2 : 0000000000000008 [ 1520.571696] x1 : ffff000008fd5000 x0 : ffff0000080b149c [ 1520.577039] Process qemu-system-aar (pid: 53550, stack limit = 0xffff800ce04e0000) [...] [ 1521.510735] [<ffff0000080b137c>] stage2_get_pmd+0x34/0x110 [ 1521.516221] [<ffff0000080b149c>] kvm_age_hva_handler+0x44/0xf0 [ 1521.522054] [<ffff0000080b0610>] handle_hva_to_gpa+0xb8/0xe8 [ 1521.527716] [<ffff0000080b3434>] kvm_age_hva+0x44/0xf0 [ 1521.532854] [<ffff0000080a58b0>] kvm_mmu_notifier_clear_flush_young+0x70/0xc0 [ 1521.539992] [<ffff000008238378>] __mmu_notifier_clear_flush_young+0x88/0xd0 [ 1521.546958] [<ffff00000821eca0>] page_referenced_one+0xf0/0x188 [ 1521.552881] [<ffff00000821f36c>] rmap_walk_anon+0xec/0x250 [ 1521.558370] [<ffff000008220f78>] rmap_walk+0x78/0xa0 [ 1521.563337] [<ffff000008221104>] page_referenced+0x164/0x180 [ 1521.569002] [<ffff0000081f1af0>] shrink_active_list+0x178/0x3b8 [ 1521.574922] [<ffff0000081f2058>] shrink_node_memcg+0x328/0x600 [ 1521.580758] [<ffff0000081f23f4>] shrink_node+0xc4/0x328 [ 1521.585986] [<ffff0000081f2718>] do_try_to_free_pages+0xc0/0x340 [ 1521.592000] [<ffff0000081f2a64>] try_to_free_pages+0xcc/0x240 [...] The trivial fix is to handle this NULL pud value early, rather than dereferencing it blindly. Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-06KVM: arm/arm64: vgic-v3: Fix nr_pre_bits bitfield extractionChristoffer Dall1-1/+1
We used to extract PRIbits from the ICH_VT_EL2 which was the upper field in the register word, so a mask wasn't necessary, but as we switched to looking at PREbits, which is bits 26 through 28 with the PRIbits field being potentially non-zero, we really need to mask off the field value, otherwise fun things may happen. Signed-off-by: Christoffer Dall <cdall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
2017-06-04KVM: arm/arm64: timer: remove request-less vcpu kickAndrew Jones1-1/+1
The timer work is only scheduled for a VCPU when that VCPU is blocked. This means we only need to wake it up, not kick (IPI) it. While calling kvm_vcpu_kick() would just do the wake up, and not kick, anyway, let's change this to avoid request-less vcpu kicks, as they're generally not a good idea (see "Request-less VCPU Kicks" in Documentation/virtual/kvm/vcpu-requests.rst) Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-04KVM: arm/arm64: PMU: remove request-less vcpu kickAndrew Jones1-21/+19
Refactor PMU overflow handling in order to remove the request-less vcpu kick. Now, since kvm_vgic_inject_irq() uses vcpu requests, there should be no chance that a kick sent at just the wrong time (between the VCPU's call to kvm_pmu_flush_hwstate() and before it enters guest mode) results in a failure for the guest to see updated GIC state until its next exit some time later for some other reason. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-04KVM: arm/arm64: use vcpu requests for irq injectionAndrew Jones2-2/+14
Don't use request-less VCPU kicks when injecting IRQs, as a VCPU kick meant to trigger the interrupt injection could be sent while the VCPU is outside guest mode, which means no IPI is sent, and after it has called kvm_vgic_flush_hwstate(), meaning it won't see the updated GIC state until its next exit some time later for some other reason. The receiving VCPU only needs to check this request in VCPU RUN to handle it. By checking it, if it's pending, a memory barrier will be issued that ensures all state is visible. See "Ensuring Requests Are Seen" of Documentation/virtual/kvm/vcpu-requests.rst Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-04KVM: arm/arm64: change exit request to sleep requestAndrew Jones2-8/+8
A request called EXIT is too generic. All requests are meant to cause exits, but different requests have different flags. Let's not make it difficult to decide if the EXIT request is correct for some case by just always providing unique requests for each case. This patch changes EXIT to SLEEP, because that's what the request is asking the VCPU to do. Signed-off-by: Andrew Jones <drjones@redhat.com> Acked-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>