summaryrefslogtreecommitdiffstats
path: root/virt
AgeCommit message (Collapse)AuthorFilesLines
2018-03-28Merge tag 'kvm-arm-for-v4.17' of ↵Radim Krčmář15-489/+650
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm KVM/ARM updates for v4.17 - VHE optimizations - EL2 address space randomization - Variant 3a mitigation for Cortex-A57 and A72 - The usual vgic fixes - Various minor tidying-up
2018-03-26KVM: arm/arm64: vgic-its: Fix potential overrun in vgic_copy_lpi_listMarc Zyngier1-6/+9
vgic_copy_lpi_list() parses the LPI list and picks LPIs targeting a given vcpu. We allocate the array containing the intids before taking the lpi_list_lock, which means we can have an array size that is not equal to the number of LPIs. This is particularly obvious when looking at the path coming from vgic_enable_lpis, which is not a command, and thus can run in parallel with commands: vcpu 0: vcpu 1: vgic_enable_lpis its_sync_lpi_pending_table vgic_copy_lpi_list intids = kmalloc_array(irq_count) MAPI(lpi targeting vcpu 0) list_for_each_entry(lpi_list_head) intids[i++] = irq->intid; At that stage, we will happily overrun the intids array. Boo. An easy fix is is to break once the array is full. The MAPI command will update the config anyway, and we won't miss a thing. We also make sure that lpi_list_count is read exactly once, so that further updates of that value will not affect the array bound check. Cc: stable@vger.kernel.org Fixes: ccb1d791ab9e ("KVM: arm64: vgic-its: Fix pending table sync") Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-26KVM: arm/arm64: vgic: Disallow Active+Pending for level interruptsMarc Zyngier2-48/+60
It was recently reported that VFIO mediated devices, and anything that VFIO exposes as level interrupts, do no strictly follow the expected logic of such interrupts as it only lowers the input line when the guest has EOId the interrupt at the GIC level, rather than when it Acked the interrupt at the device level. THe GIC's Active+Pending state is fundamentally incompatible with this behaviour, as it prevents KVM from observing the EOI, and in turn results in VFIO never dropping the line. This results in an interrupt storm in the guest, which it really never expected. As we cannot really change VFIO to follow the strict rules of level signalling, let's forbid the A+P state altogether, as it is in the end only an optimization. It ensures that we will transition via an invalid state, which we can use to notify VFIO of the EOI. Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Tested-by: Shunyong Yang <shunyong.yang@hxt-semitech.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-19Merge tag 'kvm-arm-fixes-for-v4.16-2' into HEADMarc Zyngier7-72/+169
Resolve conflicts with current mainline
2018-03-19arm/arm64: KVM: Introduce EL2-specific executable mappingsMarc Zyngier1-21/+59
Until now, all EL2 executable mappings were derived from their EL1 VA. Since we want to decouple the vectors mapping from the rest of the hypervisor, we need to be able to map some text somewhere else. The "idmap" region (for lack of a better name) is ideally suited for this, as we have a huge range that hardly has anything in it. Let's extend the IO allocator to also deal with executable mappings, thus providing the required feature. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-19arm64: KVM: Introduce EL2 VA randomisationMarc Zyngier1-1/+1
The main idea behind randomising the EL2 VA is that we usually have a few spare bits between the most significant bit of the VA mask and the most significant bit of the linear mapping. Those bits could be a bunch of zeroes, and could be useful to move things around a bit. Of course, the more memory you have, the less randomisation you get... Alternatively, these bits could be the result of KASLR, in which case they are already random. But it would be nice to have a *different* randomization, just to make the job of a potential attacker a bit more difficult. Inserting these random bits is a bit involved. We don't have a spare register (short of rewriting all the kern_hyp_va call sites), and the immediate we want to insert is too random to be used with the ORR instruction. The best option I could come up with is the following sequence: and x0, x0, #va_mask ror x0, x0, #first_random_bit add x0, x0, #(random & 0xfff) add x0, x0, #(random >> 12), lsl #12 ror x0, x0, #(63 - first_random_bit) making it a fairly long sequence, but one that a decent CPU should be able to execute without breaking a sweat. It is of course NOPed out on VHE. The last 4 instructions can also be turned into NOPs if it appears that there is no free bits to use. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: James Morse <james.morse@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-19KVM: arm/arm64: Move HYP IO VAs to the "idmap" rangeMarc Zyngier1-14/+59
We so far mapped our HYP IO (which is essentially the GICv2 control registers) using the same method as for memory. It recently appeared that is a bit unsafe: We compute the HYP VA using the kern_hyp_va helper, but that helper is only designed to deal with kernel VAs coming from the linear map, and not from the vmalloc region... This could in turn cause some bad aliasing between the two, amplified by the upcoming VA randomisation. A solution is to come up with our very own basic VA allocator for MMIO. Since half of the HYP address space only contains a single page (the idmap), we have plenty to borrow from. Let's use the idmap as a base, and allocate downwards from it. GICv2 now lives on the other side of the great VA barrier. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-19KVM: arm64: Fix HYP idmap unmap when using 52bit PAMarc Zyngier1-5/+21
Unmapping the idmap range using 52bit PA is quite broken, as we don't take into account the right number of PGD entries, and rely on PTRS_PER_PGD. The result is that pgd_index() truncates the address, and we end-up in the weed. Let's introduce a new unmap_hyp_idmap_range() that knows about this, together with a kvm_pgd_index() helper, which hides a bit of the complexity of the issue. Fixes: 98732d1b189b ("KVM: arm/arm64: fix HYP ID map extension to 52 bits") Reported-by: James Morse <james.morse@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-19KVM: arm/arm64: Fix idmap size and alignmentMarc Zyngier1-0/+2
Although the idmap section of KVM can only be at most 4kB and must be aligned on a 4kB boundary, the rest of the code expects it to be page aligned. Things get messy when tearing down the HYP page tables when PAGE_SIZE is 64K, and the idmap section isn't 64K aligned. Let's fix this by computing aligned boundaries that the HYP code will use. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: James Morse <james.morse@arm.com> Reviewed-by: James Morse <james.morse@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-19KVM: arm/arm64: Keep GICv2 HYP VAs in kvm_vgic_global_stateMarc Zyngier3-25/+27
As we're about to change the way we map devices at HYP, we need to move away from kern_hyp_va on an IO address. One way of achieving this is to store the VAs in kvm_vgic_global_state, and use that directly from the HYP code. This requires a small change to create_hyp_io_mappings so that it can also return a HYP VA. We take this opportunity to nuke the vctrl_base field in the emulated distributor, as it is not used anymore. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-19KVM: arm/arm64: Move ioremap calls to create_hyp_io_mappingsMarc Zyngier2-33/+22
Both HYP io mappings call ioremap, followed by create_hyp_io_mappings. Let's move the ioremap call into create_hyp_io_mappings itself, which simplifies the code a bit and allows for further refactoring. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-19KVM: arm/arm64: Demote HYP VA range display to being a debug featureMarc Zyngier1-3/+4
Displaying the HYP VA information is slightly counterproductive when using VA randomization. Turn it into a debug feature only, and adjust the last displayed value to reflect the top of RAM instead of ~0. Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-19KVM: arm/arm64: Avoid VGICv3 save/restore on VHE with no IRQsChristoffer Dall3-48/+87
We can finally get completely rid of any calls to the VGICv3 save/restore functions when the AP lists are empty on VHE systems. This requires carefully factoring out trap configuration from saving and restoring state, and carefully choosing what to do on the VHE and non-VHE path. One of the challenges is that we cannot save/restore the VMCR lazily because we can only write the VMCR when ICC_SRE_EL1.SRE is cleared when emulating a GICv2-on-GICv3, since otherwise all Group-0 interrupts end up being delivered as FIQ. To solve this problem, and still provide fast performance in the fast path of exiting a VM when no interrupts are pending (which also optimized the latency for actually delivering virtual interrupts coming from physical interrupts), we orchestrate a dance of only doing the activate/deactivate traps in vgic load/put for VHE systems (which can have ICC_SRE_EL1.SRE cleared when running in the host), and doing the configuration on every round-trip on non-VHE systems. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-19KVM: arm/arm64: Move VGIC APR save/restore to vgic put/loadChristoffer Dall3-62/+74
The APRs can only have bits set when the guest acknowledges an interrupt in the LR and can only have a bit cleared when the guest EOIs an interrupt in the LR. Therefore, if we have no LRs with any pending/active interrupts, the APR cannot change value and there is no need to clear it on every exit from the VM (hint: it will have already been cleared when we exited the guest the last time with the LRs all EOIed). The only case we need to take care of is when we migrate the VCPU away from a CPU or migrate a new VCPU onto a CPU, or when we return to userspace to capture the state of the VCPU for migration. To make sure this works, factor out the APR save/restore functionality into separate functions called from the VCPU (and by extension VGIC) put/load hooks. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-19KVM: arm/arm64: Handle VGICv3 save/restore from the main VGIC code on VHEChristoffer Dall2-2/+20
Just like we can program the GICv2 hypervisor control interface directly from the core vgic code, we can do the same for the GICv3 hypervisor control interface on VHE systems. We do this by simply calling the save/restore functions when we have VHE and we can then get rid of the save/restore function calls from the VHE world switch function. One caveat is that we now write GICv3 system register state before the potential early exit path in the run loop, and because we sync back state in the early exit path, we have to ensure that we read a consistent GIC state from the sync path, even though we have never actually run the guest with the newly written GIC state. We solve this by inserting an ISB in the early exit path. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-19KVM: arm/arm64: Move arm64-only vgic-v2-sr.c file to arm64Christoffer Dall1-80/+0
The vgic-v2-sr.c file now only contains the logic to replay unaligned accesses to the virtual CPU interface on 16K and 64K page systems, which is only relevant on 64-bit platforms. Therefore move this file to the arm64 KVM tree, remove the compile directive from the 32-bit side makefile, and remove the ifdef in the C file. Since this file also no longer saves/restores anything, rename the file to vgic-v2-cpuif-proxy.c to more accurately describe the logic in this file. Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-19KVM: arm/arm64: Handle VGICv2 save/restore from the main VGIC codeChristoffer Dall4-66/+84
We can program the GICv2 hypervisor control interface logic directly from the core vgic code and can instead do the save/restore directly from the flush/sync functions, which can lead to a number of future optimizations. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-19KVM: arm/arm64: Get rid of vgic_elrsrChristoffer Dall4-26/+10
There is really no need to store the vgic_elrsr on the VGIC data structures as the only need we have for the elrsr is to figure out if an LR is inactive when we save the VGIC state upon returning from the guest. We can might as well store this in a temporary local variable. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-19KVM: arm/arm64: Prepare to handle deferred save/restore of SPSR_EL1Christoffer Dall1-1/+1
SPSR_EL1 is not used by a VHE host kernel and can be deferred, but we need to rework the accesses to this register to access the latest value depending on whether or not guest system registers are loaded on the CPU or only reside in memory. The handling of accessing the various banked SPSRs for 32-bit VMs is a bit clunky, but this will be improved in following patches which will first prepare and subsequently implement deferred save/restore of the 32-bit registers, including the 32-bit SPSRs. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-19KVM: arm64: Rewrite system register accessors to read/write functionsChristoffer Dall1-18/+18
Currently we access the system registers array via the vcpu_sys_reg() macro. However, we are about to change the behavior to some times modify the register file directly, so let's change this to two primitives: * Accessor macros vcpu_write_sys_reg() and vcpu_read_sys_reg() * Direct array access macro __vcpu_sys_reg() The accessor macros should be used in places where the code needs to access the currently loaded VCPU's state as observed by the guest. For example, when trapping on cache related registers, a write to a system register should go directly to the VCPU version of the register. The direct array access macro can be used in places where the VCPU is known to never be running (for example userspace access) or for registers which are never context switched (for example all the PMU system registers). This rewrites all users of vcpu_sys_regs to one of the macros described above. No functional change. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-19KVM: arm64: Remove noop calls to timer save/restore from VHE switchChristoffer Dall1-22/+22
The VHE switch function calls __timer_enable_traps and __timer_disable_traps which don't do anything on VHE systems. Therefore, simply remove these calls from the VHE switch function and make the functions non-conditional as they are now only called from the non-VHE switch path. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-19KVM: arm64: Introduce VHE-specific kvm_vcpu_runChristoffer Dall1-5/+7
So far this is mostly (see below) a copy of the legacy non-VHE switch function, but we will start reworking these functions in separate directions to work on VHE and non-VHE in the most optimal way in later patches. The only difference after this patch between the VHE and non-VHE run functions is that we omit the branch-predictor variant-2 hardening for QC Falkor CPUs, because this workaround is specific to a series of non-VHE ARMv8.0 CPUs. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-19KVM: arm/arm64: Add kvm_vcpu_load_sysregs and kvm_vcpu_put_sysregsChristoffer Dall1-0/+2
As we are about to move a bunch of save/restore logic for VHE kernels to the load and put functions, we need some infrastructure to do this. Reviewed-by: Andrew Jones <drjones@redhat.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-19KVM: arm/arm64: Get rid of vcpu->arch.irq_linesChristoffer Dall2-8/+9
We currently have a separate read-modify-write of the HCR_EL2 on entry to the guest for the sole purpose of setting the VF and VI bits, if set. Since this is most rarely the case (only when using userspace IRQ chip and interrupts are in flight), let's get rid of this operation and instead modify the bits in the vcpu->arch.hcr[_el2] directly when needed. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Julien Thierry <julien.thierry@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-19KVM: arm/arm64: Move vcpu_load call after kvm_vcpu_first_run_initChristoffer Dall3-29/+8
Moving the call to vcpu_load() in kvm_arch_vcpu_ioctl_run() to after we've called kvm_vcpu_first_run_init() simplifies some of the vgic and there is also no need to do vcpu_load() for things such as handling the immediate_exit flag. Reviewed-by: Julien Grall <julien.grall@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-19KVM: arm/arm64: Avoid vcpu_load for other vcpu ioctls than KVM_RUNChristoffer Dall1-9/+0
Calling vcpu_load() registers preempt notifiers for this vcpu and calls kvm_arch_vcpu_load(). The latter will soon be doing a lot of heavy lifting on arm/arm64 and will try to do things such as enabling the virtual timer and setting us up to handle interrupts from the timer hardware. Loading state onto hardware registers and enabling hardware to signal interrupts can be problematic when we're not actually about to run the VCPU, because it makes it difficult to establish the right context when handling interrupts from the timer, and it makes the register access code difficult to reason about. Luckily, now when we call vcpu_load in each ioctl implementation, we can simply remove the call from the non-KVM_RUN vcpu ioctls, and our kvm_arch_vcpu_load() is only used for loading vcpu content to the physical CPU when we're actually going to run the vcpu. Reviewed-by: Julien Grall <julien.grall@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-14kvm: arm/arm64: vgic-v3: Tighten synchronization for guests using v2 on v3Marc Zyngier1-1/+2
On guest exit, and when using GICv2 on GICv3, we use a dsb(st) to force synchronization between the memory-mapped guest view and the system-register view that the hypervisor uses. This is incorrect, as the spec calls out the need for "a DSB whose required access type is both loads and stores with any Shareability attribute", while we're only synchronizing stores. We also lack an isb after the dsb to ensure that the latter has actually been executed before we start reading stuff from the sysregs. The fix is pretty easy: turn dsb(st) into dsb(sy), and slap an isb() just after. Cc: stable@vger.kernel.org Fixes: f68d2b1b73cc ("arm64: KVM: Implement vgic-v3 save/restore") Acked-by: Christoffer Dall <cdall@kernel.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-14KVM: arm/arm64: vgic: Don't populate multiple LRs with the same vintidMarc Zyngier4-16/+65
The vgic code is trying to be clever when injecting GICv2 SGIs, and will happily populate LRs with the same interrupt number if they come from multiple vcpus (after all, they are distinct interrupt sources). Unfortunately, this is against the letter of the architecture, and the GICv2 architecture spec says "Each valid interrupt stored in the List registers must have a unique VirtualID for that virtual CPU interface.". GICv3 has similar (although slightly ambiguous) restrictions. This results in guests locking up when using GICv2-on-GICv3, for example. The obvious fix is to stop trying so hard, and inject a single vcpu per SGI per guest entry. After all, pending SGIs with multiple source vcpus are pretty rare, and are mostly seen in scenario where the physical CPUs are severely overcomitted. But as we now only inject a single instance of a multi-source SGI per vcpu entry, we may delay those interrupts for longer than strictly necessary, and run the risk of injecting lower priority interrupts in the meantime. In order to address this, we adopt a three stage strategy: - If we encounter a multi-source SGI in the AP list while computing its depth, we force the list to be sorted - When populating the LRs, we prevent the injection of any interrupt of lower priority than that of the first multi-source SGI we've injected. - Finally, the injection of a multi-source SGI triggers the request of a maintenance interrupt when there will be no pending interrupt in the LRs (HCR_NPIE). At the point where the last pending interrupt in the LRs switches from Pending to Active, the maintenance interrupt will be delivered, allowing us to add the remaining SGIs using the same process. Cc: stable@vger.kernel.org Fixes: 0919e84c0fc1 ("KVM: arm/arm64: vgic-new: Add IRQ sync/flush framework") Acked-by: Christoffer Dall <cdall@kernel.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-14KVM: arm/arm64: Reduce verbosity of KVM init logArd Biesheuvel3-5/+5
On my GICv3 system, the following is printed to the kernel log at boot: kvm [1]: 8-bit VMID kvm [1]: IDMAP page: d20e35000 kvm [1]: HYP VA range: 800000000000:ffffffffffff kvm [1]: vgic-v2@2c020000 kvm [1]: GIC system register CPU interface enabled kvm [1]: vgic interrupt IRQ1 kvm [1]: virtual timer IRQ4 kvm [1]: Hyp mode initialized successfully The KVM IDMAP is a mapping of a statically allocated kernel structure, and so printing its physical address leaks the physical placement of the kernel when physical KASLR in effect. So change the kvm_info() to kvm_debug() to remove it from the log output. While at it, trim the output a bit more: IRQ numbers can be found in /proc/interrupts, and the HYP VA and vgic-v2 lines are not highly informational either. Cc: <stable@vger.kernel.org> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Christoffer Dall <cdall@kernel.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-14KVM: arm/arm64: Reset mapped IRQs on VM resetChristoffer Dall2-0/+30
We currently don't allow resetting mapped IRQs from userspace, because their state is controlled by the hardware. But we do need to reset the state when the VM is reset, so we provide a function for the 'owner' of the mapped interrupt to reset the interrupt state. Currently only the timer uses mapped interrupts, so we call this function from the timer reset logic. Cc: stable@vger.kernel.org Fixes: 4c60e360d6df ("KVM: arm/arm64: Provide a get_input_level for the arch timer") Signed-off-by: Christoffer Dall <cdall@kernel.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-14KVM: arm/arm64: Avoid vcpu_load for other vcpu ioctls than KVM_RUNChristoffer Dall1-9/+0
Calling vcpu_load() registers preempt notifiers for this vcpu and calls kvm_arch_vcpu_load(). The latter will soon be doing a lot of heavy lifting on arm/arm64 and will try to do things such as enabling the virtual timer and setting us up to handle interrupts from the timer hardware. Loading state onto hardware registers and enabling hardware to signal interrupts can be problematic when we're not actually about to run the VCPU, because it makes it difficult to establish the right context when handling interrupts from the timer, and it makes the register access code difficult to reason about. Luckily, now when we call vcpu_load in each ioctl implementation, we can simply remove the call from the non-KVM_RUN vcpu ioctls, and our kvm_arch_vcpu_load() is only used for loading vcpu content to the physical CPU when we're actually going to run the vcpu. Cc: stable@vger.kernel.org Fixes: 9b062471e52a ("KVM: Move vcpu_load to arch-specific kvm_arch_vcpu_ioctl") Reviewed-by: Julien Grall <julien.grall@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-14KVM: arm/arm64: vgic: Add missing irq_lock to vgic_mmio_read_pendingAndre Przywara2-0/+4
Our irq_is_pending() helper function accesses multiple members of the vgic_irq struct, so we need to hold the lock when calling it. Add that requirement as a comment to the definition and take the lock around the call in vgic_mmio_read_pending(), where we were missing it before. Fixes: 96b298000db4 ("KVM: arm/arm64: vgic-new: Add PENDING registers handlers") Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-06kvm: use insert sort in kvm_io_bus_register_dev functionGal Hammer1-18/+18
The loading time of a VM is quite significant with a CPU usage reaching 100% when loading a VM that its virtio devices use a large amount of virt-queues (e.g. a virtio-serial device with max_ports=511). Most of the time is spend in re-sorting the kvm_io_bus kvm_io_range array when a new eventfd is registered. The patch replaces the existing method with an insert sort. Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Uri Lublin <ulublin@redhat.com> Signed-off-by: Gal Hammer <ghammer@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2018-02-26KVM: arm/arm64: No need to zero CNTVOFF in kvm_timer_vcpu_put() for VHEShanker Donthineni1-2/+4
In AArch64/AArch32, the virtual counter uses a fixed virtual offset of zero in the following situations as per ARMv8 specifications: 1) HCR_EL2.E2H is 1, and CNTVCT_EL0/CNTVCT are read from EL2. 2) HCR_EL2.{E2H, TGE} is {1, 1}, and either: — CNTVCT_EL0 is read from Non-secure EL0 or EL2. — CNTVCT is read from Non-secure EL0. So, no need to zero CNTVOFF_EL2/CNTVOFF for VHE case. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2018-02-24KVM: mmu: Fix overlap between public and private memslotsWanpeng Li1-2/+1
Reported by syzkaller: pte_list_remove: ffff9714eb1f8078 0->BUG ------------[ cut here ]------------ kernel BUG at arch/x86/kvm/mmu.c:1157! invalid opcode: 0000 [#1] SMP RIP: 0010:pte_list_remove+0x11b/0x120 [kvm] Call Trace: drop_spte+0x83/0xb0 [kvm] mmu_page_zap_pte+0xcc/0xe0 [kvm] kvm_mmu_prepare_zap_page+0x81/0x4a0 [kvm] kvm_mmu_invalidate_zap_all_pages+0x159/0x220 [kvm] kvm_arch_flush_shadow_all+0xe/0x10 [kvm] kvm_mmu_notifier_release+0x6c/0xa0 [kvm] ? kvm_mmu_notifier_release+0x5/0xa0 [kvm] __mmu_notifier_release+0x79/0x110 ? __mmu_notifier_release+0x5/0x110 exit_mmap+0x15a/0x170 ? do_exit+0x281/0xcb0 mmput+0x66/0x160 do_exit+0x2c9/0xcb0 ? __context_tracking_exit.part.5+0x4a/0x150 do_group_exit+0x50/0xd0 SyS_exit_group+0x14/0x20 do_syscall_64+0x73/0x1f0 entry_SYSCALL64_slow_path+0x25/0x25 The reason is that when creates new memslot, there is no guarantee for new memslot not overlap with private memslots. This can be triggered by the following program: #include <fcntl.h> #include <pthread.h> #include <setjmp.h> #include <signal.h> #include <stddef.h> #include <stdint.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/ioctl.h> #include <sys/stat.h> #include <sys/syscall.h> #include <sys/types.h> #include <unistd.h> #include <linux/kvm.h> long r[16]; int main() { void *p = valloc(0x4000); r[2] = open("/dev/kvm", 0); r[3] = ioctl(r[2], KVM_CREATE_VM, 0x0ul); uint64_t addr = 0xf000; ioctl(r[3], KVM_SET_IDENTITY_MAP_ADDR, &addr); r[6] = ioctl(r[3], KVM_CREATE_VCPU, 0x0ul); ioctl(r[3], KVM_SET_TSS_ADDR, 0x0ul); ioctl(r[6], KVM_RUN, 0); ioctl(r[6], KVM_RUN, 0); struct kvm_userspace_memory_region mr = { .slot = 0, .flags = KVM_MEM_LOG_DIRTY_PAGES, .guest_phys_addr = 0xf000, .memory_size = 0x4000, .userspace_addr = (uintptr_t) p }; ioctl(r[3], KVM_SET_USER_MEMORY_REGION, &mr); return 0; } This patch fixes the bug by not adding a new memslot even if it overlaps with private memslots. Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eric Biggers <ebiggers3@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> --- virt/kvm/kvm_main.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
2018-02-15KVM: arm/arm64: Fix arch timers with userspace irqchipsChristoffer Dall1-52/+64
When introducing support for irqchip in userspace we needed a way to mask the timer signal to prevent the guest continuously exiting due to a screaming timer. We did this by disabling the corresponding percpu interrupt on the host interrupt controller, because we cannot rely on the host system having a GIC, and therefore cannot make any assumptions about having an active state to hide the timer signal. Unfortunately, when introducing this feature, it became entirely possible that a VCPU which belongs to a VM that has a userspace irqchip can disable the vtimer irq on the host on some physical CPU, and then go away without ever enabling the vtimer irq on that physical CPU again. This means that using irqchips in userspace on a system that also supports running VMs with an in-kernel GIC can prevent forward progress from in-kernel GIC VMs. Later on, when we started taking virtual timer interrupts in the arch timer code, we would also leave this timer state active for userspace irqchip VMs, because we leave it up to a VGIC-enabled guest to deactivate the hardware IRQ using the HW bit in the LR. Both issues are solved by only using the enable/disable trick on systems that do not have a host GIC which supports the active state, because all VMs on such systems must use irqchips in userspace. Systems that have a working GIC with support for an active state use the active state to mask the timer signal for both userspace and in-kernel irqchips. Cc: Alexander Graf <agraf@suse.de> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <stable@vger.kernel.org> # v4.12+ Fixes: d9e139778376 ("KVM: arm/arm64: Support arch timers with a userspace gic") Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds1-4/+4
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-10Merge tag 'kvm-4.16-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds12-183/+464
Pull KVM updates from Radim Krčmář: "ARM: - icache invalidation optimizations, improving VM startup time - support for forwarded level-triggered interrupts, improving performance for timers and passthrough platform devices - a small fix for power-management notifiers, and some cosmetic changes PPC: - add MMIO emulation for vector loads and stores - allow HPT guests to run on a radix host on POWER9 v2.2 CPUs without requiring the complex thread synchronization of older CPU versions - improve the handling of escalation interrupts with the XIVE interrupt controller - support decrement register migration - various cleanups and bugfixes. s390: - Cornelia Huck passed maintainership to Janosch Frank - exitless interrupts for emulated devices - cleanup of cpuflag handling - kvm_stat counter improvements - VSIE improvements - mm cleanup x86: - hypervisor part of SEV - UMIP, RDPID, and MSR_SMI_COUNT emulation - paravirtualized TLB shootdown using the new KVM_VCPU_PREEMPTED bit - allow guests to see TOPOEXT, GFNI, VAES, VPCLMULQDQ, and more AVX512 features - show vcpu id in its anonymous inode name - many fixes and cleanups - per-VCPU MSR bitmaps (already merged through x86/pti branch) - stable KVM clock when nesting on Hyper-V (merged through x86/hyperv)" * tag 'kvm-4.16-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (197 commits) KVM: PPC: Book3S: Add MMIO emulation for VMX instructions KVM: PPC: Book3S HV: Branch inside feature section KVM: PPC: Book3S HV: Make HPT resizing work on POWER9 KVM: PPC: Book3S HV: Fix handling of secondary HPTEG in HPT resizing code KVM: PPC: Book3S PR: Fix broken select due to misspelling KVM: x86: don't forget vcpu_put() in kvm_arch_vcpu_ioctl_set_sregs() KVM: PPC: Book3S PR: Fix svcpu copying with preemption enabled KVM: PPC: Book3S HV: Drop locks before reading guest memory kvm: x86: remove efer_reload entry in kvm_vcpu_stat KVM: x86: AMD Processor Topology Information x86/kvm/vmx: do not use vm-exit instruction length for fast MMIO when running nested kvm: embed vcpu id to dentry of vcpu anon inode kvm: Map PFN-type memory regions as writable (if possible) x86/kvm: Make it compile on 32bit and with HYPYERVISOR_GUEST=n KVM: arm/arm64: Fixup userspace irqchip static key optimization KVM: arm/arm64: Fix userspace_irqchip_in_use counting KVM: arm/arm64: Fix incorrect timer_is_pending logic MAINTAINERS: update KVM/s390 maintainers MAINTAINERS: add Halil as additional vfio-ccw maintainer MAINTAINERS: add David as a reviewer for KVM/s390 ...
2018-02-08Merge tag 'arm64-upstream' of ↵Linus Torvalds2-25/+120
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull more arm64 updates from Catalin Marinas: "As I mentioned in the last pull request, there's a second batch of security updates for arm64 with mitigations for Spectre/v1 and an improved one for Spectre/v2 (via a newly defined firmware interface API). Spectre v1 mitigation: - back-end version of array_index_mask_nospec() - masking of the syscall number to restrict speculation through the syscall table - masking of __user pointers prior to deference in uaccess routines Spectre v2 mitigation update: - using the new firmware SMC calling convention specification update - removing the current PSCI GET_VERSION firmware call mitigation as vendors are deploying new SMCCC-capable firmware - additional branch predictor hardening for synchronous exceptions and interrupts while in user mode Meltdown v3 mitigation update: - Cavium Thunder X is unaffected but a hardware erratum gets in the way. The kernel now starts with the page tables mapped as global and switches to non-global if kpti needs to be enabled. Other: - Theoretical trylock bug fixed" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (38 commits) arm64: Kill PSCI_GET_VERSION as a variant-2 workaround arm64: Add ARM_SMCCC_ARCH_WORKAROUND_1 BP hardening support arm/arm64: smccc: Implement SMCCC v1.1 inline primitive arm/arm64: smccc: Make function identifiers an unsigned quantity firmware/psci: Expose SMCCC version through psci_ops firmware/psci: Expose PSCI conduit arm64: KVM: Add SMCCC_ARCH_WORKAROUND_1 fast handling arm64: KVM: Report SMCCC_ARCH_WORKAROUND_1 BP hardening support arm/arm64: KVM: Turn kvm_psci_version into a static inline arm/arm64: KVM: Advertise SMCCC v1.1 arm/arm64: KVM: Implement PSCI 1.0 support arm/arm64: KVM: Add smccc accessors to PSCI code arm/arm64: KVM: Add PSCI_VERSION helper arm/arm64: KVM: Consolidate the PSCI include files arm64: KVM: Increment PC after handling an SMC trap arm: KVM: Fix SMCCC handling of unimplemented SMC/HVC calls arm64: KVM: Fix SMCCC handling of unimplemented SMC/HVC calls arm64: entry: Apply BP hardening for suspicious interrupts from EL0 arm64: entry: Apply BP hardening for high-priority synchronous exceptions arm64: futex: Mask __user pointers prior to dereference ...
2018-02-06arm64: KVM: Report SMCCC_ARCH_WORKAROUND_1 BP hardening supportMarc Zyngier1-1/+8
A new feature of SMCCC 1.1 is that it offers firmware-based CPU workarounds. In particular, SMCCC_ARCH_WORKAROUND_1 provides BP hardening for CVE-2017-5715. If the host has some mitigation for this issue, report that we deal with it using SMCCC_ARCH_WORKAROUND_1, as we apply the host workaround on every guest exit. Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-02-06arm/arm64: KVM: Turn kvm_psci_version into a static inlineMarc Zyngier1-10/+2
We're about to need kvm_psci_version in HYP too. So let's turn it into a static inline, and pass the kvm structure as a second parameter (so that HYP can do a kern_hyp_va on it). Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-02-06arm/arm64: KVM: Advertise SMCCC v1.1Marc Zyngier1-1/+23
The new SMC Calling Convention (v1.1) allows for a reduced overhead when calling into the firmware, and provides a new feature discovery mechanism. Make it visible to KVM guests. Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-02-06arm/arm64: KVM: Implement PSCI 1.0 supportMarc Zyngier1-1/+44
PSCI 1.0 can be trivially implemented by providing the FEATURES call on top of PSCI 0.2 and returning 1.0 as the PSCI version. We happily ignore everything else, as they are either optional or are clarifications that do not require any additional change. PSCI 1.0 is now the default until we decide to add a userspace selection API. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-02-06arm/arm64: KVM: Add smccc accessors to PSCI codeMarc Zyngier1-10/+42
Instead of open coding the accesses to the various registers, let's add explicit SMCCC accessors. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-02-06arm/arm64: KVM: Add PSCI_VERSION helperMarc Zyngier1-3/+1
As we're about to trigger a PSCI version explosion, it doesn't hurt to introduce a PSCI_VERSION helper that is going to be used everywhere. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-02-06arm/arm64: KVM: Consolidate the PSCI include filesMarc Zyngier2-2/+3
As we're about to update the PSCI support, and because I'm lazy, let's move the PSCI include file to include/kvm so that both ARM architectures can find it. Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-02-03Merge tag 'usercopy-v4.16-rc1' of ↵Linus Torvalds1-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardened usercopy whitelisting from Kees Cook: "Currently, hardened usercopy performs dynamic bounds checking on slab cache objects. This is good, but still leaves a lot of kernel memory available to be copied to/from userspace in the face of bugs. To further restrict what memory is available for copying, this creates a way to whitelist specific areas of a given slab cache object for copying to/from userspace, allowing much finer granularity of access control. Slab caches that are never exposed to userspace can declare no whitelist for their objects, thereby keeping them unavailable to userspace via dynamic copy operations. (Note, an implicit form of whitelisting is the use of constant sizes in usercopy operations and get_user()/put_user(); these bypass all hardened usercopy checks since these sizes cannot change at runtime.) This new check is WARN-by-default, so any mistakes can be found over the next several releases without breaking anyone's system. The series has roughly the following sections: - remove %p and improve reporting with offset - prepare infrastructure and whitelist kmalloc - update VFS subsystem with whitelists - update SCSI subsystem with whitelists - update network subsystem with whitelists - update process memory with whitelists - update per-architecture thread_struct with whitelists - update KVM with whitelists and fix ioctl bug - mark all other allocations as not whitelisted - update lkdtm for more sensible test overage" * tag 'usercopy-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (38 commits) lkdtm: Update usercopy tests for whitelisting usercopy: Restrict non-usercopy caches to size 0 kvm: x86: fix KVM_XEN_HVM_CONFIG ioctl kvm: whitelist struct kvm_vcpu_arch arm: Implement thread_struct whitelist for hardened usercopy arm64: Implement thread_struct whitelist for hardened usercopy x86: Implement thread_struct whitelist for hardened usercopy fork: Provide usercopy whitelisting for task_struct fork: Define usercopy region in thread_stack slab caches fork: Define usercopy region in mm_struct slab caches net: Restrict unwhitelisted proto caches to size 0 sctp: Copy struct sctp_sock.autoclose to userspace using put_user() sctp: Define usercopy region in SCTP proto slab cache caif: Define usercopy region in caif proto slab cache ip: Define usercopy region in IP proto slab cache net: Define usercopy region in struct proto slab cache scsi: Define usercopy region in scsi_sense_cache slab cache cifs: Define usercopy region in cifs_request slab cache vxfs: Define usercopy region in vxfs_inode slab cache ufs: Define usercopy region in ufs_inode_cache slab cache ...
2018-02-01Merge branch 'x86/hyperv' of ↵Radim Krčmář6-28/+33
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Topic branch for stable KVM clockource under Hyper-V. Thanks to Christoffer Dall for resolving the ARM conflict.
2018-01-31mm, mmu_notifier: annotate mmu notifiers with blockable invalidate callbacksDavid Rientjes1-0/+1
Commit 4d4bbd8526a8 ("mm, oom_reaper: skip mm structs with mmu notifiers") prevented the oom reaper from unmapping private anonymous memory with the oom reaper when the oom victim mm had mmu notifiers registered. The rationale is that doing mmu_notifier_invalidate_range_{start,end}() around the unmap_page_range(), which is needed, can block and the oom killer will stall forever waiting for the victim to exit, which may not be possible without reaping. That concern is real, but only true for mmu notifiers that have blockable invalidate_range_{start,end}() callbacks. This patch adds a "flags" field to mmu notifier ops that can set a bit to indicate that these callbacks do not block. The implementation is steered toward an expensive slowpath, such as after the oom reaper has grabbed mm->mmap_sem of a still alive oom victim. [rientjes@google.com: mmu_notifier_invalidate_range_end() can also call the invalidate_range() must not block, fix comment] Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1801091339570.240101@chino.kir.corp.google.com [akpm@linux-foundation.org: make mm_has_blockable_invalidate_notifiers() return bool, use rwsem_is_locked()] Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1712141329500.74052@chino.kir.corp.google.com Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Dimitri Sivanich <sivanich@hpe.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Joerg Roedel <joro@8bytes.org> Cc: Doug Ledford <dledford@redhat.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-01-31Merge branch 'work.get_user_pages_fast' of ↵Linus Torvalds1-31/+12
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull get_user_pages_fast updates from Al Viro: "A bit more get_user_pages work" * 'work.get_user_pages_fast' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: kvm: switch get_user_page_nowait() to get_user_pages_unlocked() __get_user_pages_locked(): get rid of notify_drop argument get_user_pages_unlocked(): pass true to __get_user_pages_locked() notify_drop cris: switch to get_user_pages_fast() fold __get_user_pages_unlocked() into its sole remaining caller