summaryrefslogtreecommitdiffstats
path: root/virt/kvm
AgeCommit message (Collapse)AuthorFilesLines
2022-01-28Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-9/+7
Pull kvm fixes from Paolo Bonzini: "Two larger x86 series: - Redo incorrect fix for SEV/SMAP erratum - Windows 11 Hyper-V workaround Other x86 changes: - Various x86 cleanups - Re-enable access_tracking_perf_test - Fix for #GP handling on SVM - Fix for CPUID leaf 0Dh in KVM_GET_SUPPORTED_CPUID - Fix for ICEBP in interrupt shadow - Avoid false-positive RCU splat - Enable Enlightened MSR-Bitmap support for real ARM: - Correctly update the shadow register on exception injection when running in nVHE mode - Correctly use the mm_ops indirection when performing cache invalidation from the page-table walker - Restrict the vgic-v3 workaround for SEIS to the two known broken implementations Generic code changes: - Dead code cleanup" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (43 commits) KVM: eventfd: Fix false positive RCU usage warning KVM: nVMX: Allow VMREAD when Enlightened VMCS is in use KVM: nVMX: Implement evmcs_field_offset() suitable for handle_vmread() KVM: nVMX: Rename vmcs_to_field_offset{,_table} KVM: nVMX: eVMCS: Filter out VM_EXIT_SAVE_VMX_PREEMPTION_TIMER KVM: nVMX: Also filter MSR_IA32_VMX_TRUE_PINBASED_CTLS when eVMCS selftests: kvm: check dynamic bits against KVM_X86_XCOMP_GUEST_SUPP KVM: x86: add system attribute to retrieve full set of supported xsave states KVM: x86: Add a helper to retrieve userspace address from kvm_device_attr selftests: kvm: move vm_xsave_req_perm call to amx_test KVM: x86: Sync the states size with the XCR0/IA32_XSS at, any time KVM: x86: Update vCPU's runtime CPUID on write to MSR_IA32_XSS KVM: x86: Keep MSR_IA32_XSS unchanged for INIT KVM: x86: Free kvm_cpuid_entry2 array on post-KVM_RUN KVM_SET_CPUID{,2} KVM: nVMX: WARN on any attempt to allocate shadow VMCS for vmcs02 KVM: selftests: Don't skip L2's VMCALL in SMM test for SVM guest KVM: x86: Check .flags in kvm_cpuid_check_equal() too KVM: x86: Forcibly leave nested virt when SMM state is toggled KVM: SVM: drop unnecessary code in svm_hv_vmcb_dirty_nested_enlightenments() KVM: SVM: hyper-v: Enable Enlightened MSR-Bitmap support for real ...
2022-01-28KVM: eventfd: Fix false positive RCU usage warningHou Wenlong1-4/+4
Fix the following false positive warning: ============================= WARNING: suspicious RCU usage 5.16.0-rc4+ #57 Not tainted ----------------------------- arch/x86/kvm/../../../virt/kvm/eventfd.c:484 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 3 locks held by fc_vcpu 0/330: #0: ffff8884835fc0b0 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x88/0x6f0 [kvm] #1: ffffc90004c0bb68 (&kvm->srcu){....}-{0:0}, at: vcpu_enter_guest+0x600/0x1860 [kvm] #2: ffffc90004c0c1d0 (&kvm->irq_srcu){....}-{0:0}, at: kvm_notify_acked_irq+0x36/0x180 [kvm] stack backtrace: CPU: 26 PID: 330 Comm: fc_vcpu 0 Not tainted 5.16.0-rc4+ Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x44/0x57 kvm_notify_acked_gsi+0x6b/0x70 [kvm] kvm_notify_acked_irq+0x8d/0x180 [kvm] kvm_ioapic_update_eoi+0x92/0x240 [kvm] kvm_apic_set_eoi_accelerated+0x2a/0xe0 [kvm] handle_apic_eoi_induced+0x3d/0x60 [kvm_intel] vmx_handle_exit+0x19c/0x6a0 [kvm_intel] vcpu_enter_guest+0x66e/0x1860 [kvm] kvm_arch_vcpu_ioctl_run+0x438/0x7f0 [kvm] kvm_vcpu_ioctl+0x38a/0x6f0 [kvm] __x64_sys_ioctl+0x89/0xc0 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Since kvm_unregister_irq_ack_notifier() does synchronize_srcu(&kvm->irq_srcu), kvm->irq_ack_notifier_list is protected by kvm->irq_srcu. In fact, kvm->irq_srcu SRCU read lock is held in kvm_notify_acked_irq(), making it a false positive warning. So use hlist_for_each_entry_srcu() instead of hlist_for_each_entry_rcu(). Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Hou Wenlong <houwenlong93@linux.alibaba.com> Message-Id: <f98bac4f5052bad2c26df9ad50f7019e40434512.1643265976.git.houwenlong.hwl@antgroup.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-26Revert "KVM: SVM: avoid infinite loop on NPF from bad address"Sean Christopherson1-1/+0
Revert a completely broken check on an "invalid" RIP in SVM's workaround for the DecodeAssists SMAP errata. kvm_vcpu_gfn_to_memslot() obviously expects a gfn, i.e. operates in the guest physical address space, whereas RIP is a virtual (not even linear) address. The "fix" worked for the problematic KVM selftest because the test identity mapped RIP. Fully revert the hack instead of trying to translate RIP to a GPA, as the non-SEV case is now handled earlier, and KVM cannot access guest page tables to translate RIP. This reverts commit e72436bc3a5206f95bb384e741154166ddb3202e. Fixes: e72436bc3a52 ("KVM: SVM: avoid infinite loop on NPF from bad address") Reported-by: Liam Merwick <liam.merwick@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Message-Id: <20220120010719.711476-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-24KVM: remove async parameter of hva_to_pfn_remapped()Xianting Tian1-4/+3
The async parameter of hva_to_pfn_remapped() is not used, so remove it. Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com> Message-Id: <20220124020456.156386-1-xianting.tian@linux.alibaba.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-22Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-3/+2
Pull more kvm updates from Paolo Bonzini: "Generic: - selftest compilation fix for non-x86 - KVM: avoid warning on s390 in mark_page_dirty x86: - fix page write-protection bug and improve comments - use binary search to lookup the PMU event filter, add test - enable_pmu module parameter support for Intel CPUs - switch blocked_vcpu_on_cpu_lock to raw spinlock - cleanups of blocked vCPU logic - partially allow KVM_SET_CPUID{,2} after KVM_RUN (5.16 regression) - various small fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (46 commits) docs: kvm: fix WARNINGs from api.rst selftests: kvm/x86: Fix the warning in lib/x86_64/processor.c selftests: kvm/x86: Fix the warning in pmu_event_filter_test.c kvm: selftests: Do not indent with spaces kvm: selftests: sync uapi/linux/kvm.h with Linux header selftests: kvm: add amx_test to .gitignore KVM: SVM: Nullify vcpu_(un)blocking() hooks if AVIC is disabled KVM: SVM: Move svm_hardware_setup() and its helpers below svm_x86_ops KVM: SVM: Drop AVIC's intermediate avic_set_running() helper KVM: VMX: Don't do full kick when handling posted interrupt wakeup KVM: VMX: Fold fallback path into triggering posted IRQ helper KVM: VMX: Pass desired vector instead of bool for triggering posted IRQ KVM: VMX: Don't do full kick when triggering posted interrupt "fails" KVM: SVM: Skip AVIC and IRTE updates when loading blocking vCPU KVM: SVM: Use kvm_vcpu_is_blocking() in AVIC load to handle preemption KVM: SVM: Remove unnecessary APICv/AVIC update in vCPU unblocking path KVM: SVM: Don't bother checking for "running" AVIC when kicking for IPIs KVM: SVM: Signal AVIC doorbell iff vCPU is in guest mode KVM: x86: Remove defunct pre_block/post_block kvm_x86_ops hooks KVM: x86: Unexport LAPIC's switch_to_{hv,sw}_timer() helpers ...
2022-01-19KVM: Move x86 VMX's posted interrupt list_head to vcpu_vmxSean Christopherson1-2/+0
Move the seemingly generic block_vcpu_list from kvm_vcpu to vcpu_vmx, and rename the list and all associated variables to clarify that it tracks the set of vCPU that need to be poked on a posted interrupt to the wakeup vector. The list is not used to track _all_ vCPUs that are blocking, and the term "blocked" can be misleading as it may refer to a blocking condition in the host or the guest, where as the PI wakeup case is specifically for the vCPUs that are actively blocking from within the guest. No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20211208015236.1616697-7-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-19KVM: Drop unused kvm_vcpu.pre_pcpu fieldSean Christopherson1-1/+0
Remove kvm_vcpu.pre_pcpu as it no longer has any users. No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20211208015236.1616697-6-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-19KVM: avoid warning on s390 in mark_page_dirtyChristian Borntraeger1-0/+2
Avoid warnings on s390 like [ 1801.980931] CPU: 12 PID: 117600 Comm: kworker/12:0 Tainted: G E 5.17.0-20220113.rc0.git0.32ce2abb03cf.300.fc35.s390x+next #1 [ 1801.980938] Workqueue: events irqfd_inject [kvm] [...] [ 1801.981057] Call Trace: [ 1801.981060] [<000003ff805f0f5c>] mark_page_dirty_in_slot+0xa4/0xb0 [kvm] [ 1801.981083] [<000003ff8060e9fe>] adapter_indicators_set+0xde/0x268 [kvm] [ 1801.981104] [<000003ff80613c24>] set_adapter_int+0x64/0xd8 [kvm] [ 1801.981124] [<000003ff805fb9aa>] kvm_set_irq+0xc2/0x130 [kvm] [ 1801.981144] [<000003ff805f8d86>] irqfd_inject+0x76/0xa0 [kvm] [ 1801.981164] [<0000000175e56906>] process_one_work+0x1fe/0x470 [ 1801.981173] [<0000000175e570a4>] worker_thread+0x64/0x498 [ 1801.981176] [<0000000175e5ef2c>] kthread+0x10c/0x110 [ 1801.981180] [<0000000175de73c8>] __ret_from_fork+0x40/0x58 [ 1801.981185] [<000000017698440a>] ret_from_fork+0xa/0x40 when writing to a guest from an irqfd worker as long as we do not have the dirty ring. Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com> Reluctantly-acked-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20220113122924.740496-1-borntraeger@linux.ibm.com> Fixes: 2efd61a608b0 ("KVM: Warn if mark_page_dirty() is called without an active vCPU") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-16Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds8-475/+1028
Pull kvm updates from Paolo Bonzini: "RISCV: - Use common KVM implementation of MMU memory caches - SBI v0.2 support for Guest - Initial KVM selftests support - Fix to avoid spurious virtual interrupts after clearing hideleg CSR - Update email address for Anup and Atish ARM: - Simplification of the 'vcpu first run' by integrating it into KVM's 'pid change' flow - Refactoring of the FP and SVE state tracking, also leading to a simpler state and less shared data between EL1 and EL2 in the nVHE case - Tidy up the header file usage for the nvhe hyp object - New HYP unsharing mechanism, finally allowing pages to be unmapped from the Stage-1 EL2 page-tables - Various pKVM cleanups around refcounting and sharing - A couple of vgic fixes for bugs that would trigger once the vcpu xarray rework is merged, but not sooner - Add minimal support for ARMv8.7's PMU extension - Rework kvm_pgtable initialisation ahead of the NV work - New selftest for IRQ injection - Teach selftests about the lack of default IPA space and page sizes - Expand sysreg selftest to deal with Pointer Authentication - The usual bunch of cleanups and doc update s390: - fix sigp sense/start/stop/inconsistency - cleanups x86: - Clean up some function prototypes more - improved gfn_to_pfn_cache with proper invalidation, used by Xen emulation - add KVM_IRQ_ROUTING_XEN_EVTCHN and event channel delivery - completely remove potential TOC/TOU races in nested SVM consistency checks - update some PMCs on emulated instructions - Intel AMX support (joint work between Thomas and Intel) - large MMU cleanups - module parameter to disable PMU virtualization - cleanup register cache - first part of halt handling cleanups - Hyper-V enlightened MSR bitmap support for nested hypervisors Generic: - clean up Makefiles - introduce CONFIG_HAVE_KVM_DIRTY_RING - optimize memslot lookup using a tree - optimize vCPU array usage by converting to xarray" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (268 commits) x86/fpu: Fix inline prefix warnings selftest: kvm: Add amx selftest selftest: kvm: Move struct kvm_x86_state to header selftest: kvm: Reorder vcpu_load_state steps for AMX kvm: x86: Disable interception for IA32_XFD on demand x86/fpu: Provide fpu_sync_guest_vmexit_xfd_state() kvm: selftests: Add support for KVM_CAP_XSAVE2 kvm: x86: Add support for getting/setting expanded xstate buffer x86/fpu: Add uabi_size to guest_fpu kvm: x86: Add CPUID support for Intel AMX kvm: x86: Add XCR0 support for Intel AMX kvm: x86: Disable RDMSR interception of IA32_XFD_ERR kvm: x86: Emulate IA32_XFD_ERR for guest kvm: x86: Intercept #NM for saving IA32_XFD_ERR x86/fpu: Prepare xfd_err in struct fpu_guest kvm: x86: Add emulation for IA32_XFD x86/fpu: Provide fpu_update_guest_xfd() for IA32_XFD emulation kvm: x86: Enable dynamic xfeatures at KVM_SET_CPUID2 x86/fpu: Provide fpu_enable_guest_xfd_features() for KVM x86/fpu: Add guest support to xfd_enable_feature() ...
2022-01-12Merge tag 'perf_core_for_v5.17_rc1' of ↵Linus Torvalds1-0/+44
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Borislav Petkov: "Cleanup of the perf/kvm interaction." * tag 'perf_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Drop guest callback (un)register stubs KVM: arm64: Drop perf.c and fold its tiny bits of code into arm.c KVM: arm64: Hide kvm_arm_pmu_available behind CONFIG_HW_PERF_EVENTS=y KVM: arm64: Convert to the generic perf callbacks KVM: x86: Move Intel Processor Trace interrupt handler to vmx.c KVM: Move x86's perf guest info callbacks to generic KVM KVM: x86: More precisely identify NMI from guest when handling PMI KVM: x86: Drop current_vcpu for kvm_running_vcpu + kvm_arch_vcpu variable perf/core: Use static_call to optimize perf_guest_info_callbacks perf: Force architectures to opt-in to guest callbacks perf: Add wrappers for invoking guest callbacks perf/core: Rework guest callbacks to prepare for static_call support perf: Drop dead and useless guest "support" from arm, csky, nds32 and riscv perf: Stop pretending that perf can handle multiple guest callbacks KVM: x86: Register Processor Trace interrupt hook iff PT enabled in guest KVM: x86: Register perf callbacks after calling vendor's hardware_setup() perf: Protect perf_guest_cbs with RCU
2022-01-07KVM: Reinstate gfn_to_pfn_cache with invalidation supportDavid Woodhouse7-27/+395
This can be used in two modes. There is an atomic mode where the cached mapping is accessed while holding the rwlock, and a mode where the physical address is used by a vCPU in guest mode. For the latter case, an invalidation will wake the vCPU with the new KVM_REQ_GPC_INVALIDATE, and the architecture will need to refresh any caches it still needs to access before entering guest mode again. Only one vCPU can be targeted by the wake requests; it's simple enough to make it wake all vCPUs or even a mask but I don't see a use case for that additional complexity right now. Invalidation happens from the invalidate_range_start MMU notifier, which needs to be able to sleep in order to wake the vCPU and wait for it. This means that revalidation potentially needs to "wait" for the MMU operation to complete and the invalidate_range_end notifier to be invoked. Like the vCPU when it takes a page fault in that period, we just spin — fixing that in a future patch by implementing an actual *wait* may be another part of shaving this particularly hirsute yak. As noted in the comments in the function itself, the only case where the invalidate_range_start notifier is expected to be called *without* being able to sleep is when the OOM reaper is killing the process. In that case, we expect the vCPU threads already to have exited, and thus there will be nothing to wake, and no reason to wait. So we clear the KVM_REQUEST_WAIT bit and send the request anyway, then complain loudly if there actually *was* anything to wake up. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20211210163625.2886-3-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-07KVM: Warn if mark_page_dirty() is called without an active vCPUDavid Woodhouse2-10/+6
The various kvm_write_guest() and mark_page_dirty() functions must only ever be called in the context of an active vCPU, because if dirty ring tracking is enabled it may simply oops when kvm_get_running_vcpu() returns NULL for the vcpu and then kvm_dirty_ring_get() dereferences it. This oops was reported by "butt3rflyh4ck" <butterflyhuangxx@gmail.com> in https://lore.kernel.org/kvm/CAFcO6XOmoS7EacN_n6v4Txk7xL7iqRa2gABg3F7E3Naf5uG94g@mail.gmail.com/ That actual bug will be fixed under separate cover but this warning should help to prevent new ones from being added. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20211210163625.2886-2-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-09KVM: Add Makefile.kvm for common files, use it for x86David Woodhouse1-0/+13
Splitting kvm_main.c out into smaller and better-organized files is slightly non-trivial when it involves editing a bunch of per-arch KVM makefiles. Provide virt/kvm/Makefile.kvm for them to include. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Acked-by: Marc Zyngier <maz@kernel.org> Message-Id: <20211121125451.9489-3-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-09KVM: Introduce CONFIG_HAVE_KVM_DIRTY_RINGDavid Woodhouse2-2/+5
I'd like to make the build include dirty_ring.c based on whether the arch wants it or not. That's a whole lot simpler if there's a config symbol instead of doing it implicitly on KVM_DIRTY_LOG_PAGE_OFFSET being set to something non-zero. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20211121125451.9489-2-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-08KVM: Add helpers to wake/query blocking vCPUSean Christopherson2-7/+3
Add helpers to wake and query a blocking vCPU. In addition to providing nice names, the helpers reduce the probability of KVM neglecting to use kvm_arch_vcpu_get_wait(). No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20211009021236.4122790-20-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-08KVM: Don't redo ktime_get() when calculating halt-polling stop/deadlineSean Christopherson1-1/+1
Calculate the halt-polling "stop" time using "start" instead of redoing ktime_get(). In practice, the numbers involved are in the noise (e.g., in the happy case where hardware correctly predicts do_halt_poll and there are no interrupts, "start" is probably only a few cycles old) and either approach is perfectly ok. But it's more precise to count any extra latency toward the halt-polling time. Reviewed-by: David Matlack <dmatlack@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20211009021236.4122790-17-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-08KVM: stats: Add stat to detect if vcpu is currently blockingJing Zhang1-0/+4
Add a "blocking" stat that userspace can use to detect the case where a vCPU is not being run because of an vCPU/guest action, e.g. HLT or WFS on x86, WFI on arm64, etc... Current guest/host/halt stats don't show this well, e.g. if a guest halts for a long period of time then the vCPU could could appear pathologically blocked due to a host condition, when in reality the vCPU has been put into a not-runnable state by the guest. Originally-by: Cannon Matthews <cannonmatthews@google.com> Suggested-by: Sean Christopherson <seanjc@google.com> Reviewed-by: David Matlack <dmatlack@google.com> Signed-off-by: Jing Zhang <jingzhangos@google.com> [sean: renamed stat to "blocking", massaged changelog] Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20211009021236.4122790-16-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-08KVM: Split out a kvm_vcpu_block() helper from kvm_vcpu_halt()Sean Christopherson1-16/+36
Factor out the "block" part of kvm_vcpu_halt() so that x86 can emulate non-halt wait/sleep/block conditions that should not be subjected to halt-polling. No functional change intended. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: David Matlack <dmatlack@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20211009021236.4122790-15-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-08KVM: Rename kvm_vcpu_block() => kvm_vcpu_halt()Sean Christopherson1-11/+9
Rename kvm_vcpu_block() to kvm_vcpu_halt() in preparation for splitting the actual "block" sequences into a separate helper (to be named kvm_vcpu_block()). x86 will use the standalone block-only path to handle non-halt cases where the vCPU is not runnable. Rename block_ns to halt_ns to match the new function name. No functional change intended. Reviewed-by: David Matlack <dmatlack@google.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20211009021236.4122790-14-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-08KVM: Drop obsolete kvm_arch_vcpu_block_finish()Sean Christopherson1-1/+0
Drop kvm_arch_vcpu_block_finish() now that all arch implementations are nops. No functional change intended. Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: David Matlack <dmatlack@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20211009021236.4122790-10-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-08KVM: Don't block+unblock when halt-polling is successfulSean Christopherson1-3/+4
Invoke the arch hooks for block+unblock if and only if KVM actually attempts to block the vCPU. The only non-nop implementation is on x86, specifically SVM's AVIC, and there is no need to put the AVIC prior to halt-polling; KVM x86's kvm_vcpu_has_events() will scour the full vIRR to find pending IRQs regardless of whether the AVIC is loaded/"running". The primary motivation is to allow future cleanup to split out "block" from "halt", but this is also likely a small performance boost on x86 SVM when halt-polling is successful. Adjust the post-block path to update "cur" after unblocking, i.e. include AVIC load time in halt_wait_ns and halt_wait_hist, so that the behavior is consistent. Moving just the pre-block arch hook would result in only the AVIC put latency being included in the halt_wait stats. There is no obvious evidence that one way or the other is correct, so just ensure KVM is consistent. Note, x86 has two separate paths for handling APICv with respect to vCPU blocking. VMX uses hooks in x86's vcpu_block(), while SVM uses the arch hooks in kvm_vcpu_block(). Prior to this path, the two paths were more or less functionally identical. That is very much not the case after this patch, as the hooks used by VMX _must_ fire before halt-polling. x86's entire mess will be cleaned up in future patches. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20211009021236.4122790-12-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-08KVM: Reconcile discrepancies in halt-polling statsSean Christopherson1-19/+16
Move the halt-polling "success" and histogram stats update into the dedicated helper to fix a discrepancy where the success/fail "time" stats consider polling successful so long as the wait is avoided, but the main "success" and histogram stats consider polling successful if and only if a wake event was detected by the halt-polling loop. Move halt_attempted_poll to the helper as well so that all the stats are updated in a single location. While it's a bit odd to update the stat well after the fact, practically speaking there's no meaningful advantage to updating before polling. Note, there is a functional change in addition to the success vs. fail change. The histogram updates previously called ktime_get() instead of using "cur". But that change is desirable as it means all the stats are now updated with the same polling time, and avoids the extra ktime_get(), which isn't expensive but isn't free either. Reviewed-by: David Matlack <dmatlack@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20211009021236.4122790-8-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-08KVM: Refactor and document halt-polling stats update helperSean Christopherson1-7/+13
Add a comment to document that halt-polling is considered successful even if the polling loop itself didn't detect a wake event, i.e. if a wake event was detect in the final kvm_vcpu_check_block(). Invert the param to update helper so that the helper is a dumb function that is "told" whether or not polling was successful, as opposed to determining success based on blocking behavior. Opportunistically tweak the params to the update helper to reduce the line length for the call site so that it fits on a single line, and so that the prototype conforms to the more traditional kernel style. No functional change intended. Reviewed-by: David Matlack <dmatlack@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20211009021236.4122790-7-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-08KVM: Update halt-polling stats if and only if halt-polling was attemptedSean Christopherson1-3/+5
Don't update halt-polling stats if halt-polling wasn't attempted. This is a nop as @poll_ns is guaranteed to be '0' (poll_end == start); in a future patch (to move the histogram stats into the helper), it will avoid to avoid a discrepancy in what is considered a "successful" halt-poll. No functional change intended. Reviewed-by: David Matlack <dmatlack@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20211009021236.4122790-6-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-08KVM: Force PPC to define its own rcuwait objectSean Christopherson2-4/+7
Do not define/reference kvm_vcpu.wait if __KVM_HAVE_ARCH_WQP is true, and instead force the architecture (PPC) to define its own rcuwait object. Allowing common KVM to directly access vcpu->wait without a guard makes it all too easy to introduce potential bugs, e.g. kvm_vcpu_block(), kvm_vcpu_on_spin(), and async_pf_execute() all operate on vcpu->wait, not the result of kvm_arch_vcpu_get_wait(), and so may do the wrong thing for PPC. Due to PPC's shenanigans with respect to callbacks and waits (it switches to the virtual core's wait object at KVM_RUN!?!?), it's not clear whether or not this fixes any bugs. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20211009021236.4122790-5-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-08KVM: s390: Ensure kvm_arch_no_poll() is read once when blocking vCPUSean Christopherson1-2/+3
Wrap s390's halt_poll_max_steal with READ_ONCE and snapshot the result of kvm_arch_no_poll() in kvm_vcpu_block() to avoid a mostly-theoretical, largely benign bug on s390 where the result of kvm_arch_no_poll() could change due to userspace modifying halt_poll_max_steal while the vCPU is blocking. The bug is largely benign as it will either cause KVM to skip updating halt-polling times (no_poll toggles false=>true) or to update halt-polling times with a slightly flawed block_ns. Note, READ_ONCE is unnecessary in the current code, add it in case the arch hook is ever inlined, and to provide a hint that userspace can change the param at will. Fixes: 8b905d28ee17 ("KVM: s390: provide kvm_arch_no_poll function") Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20211009021236.4122790-4-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-08KVM: Avoid atomic operations when kicking the running vCPUPaolo Bonzini1-1/+14
If we do have the vcpu mutex, as is the case if kvm_running_vcpu is set to the target vcpu of the kick, changes to vcpu->mode do not need atomic operations; cmpxchg is only needed _outside_ the mutex to ensure that the IN_GUEST_MODE->EXITING_GUEST_MODE change does not race with the vcpu thread going OUTSIDE_GUEST_MODE. Use this to optimize the case of a vCPU sending an interrupt to itself. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-08KVM: x86/mmu: Propagate memslot const qualifierBen Gardon1-6/+6
In preparation for implementing in-place hugepage promotion, various functions will need to be called from zap_collapsible_spte_range, which has the const qualifier on its memslot argument. Propagate the const qualifier to the various functions which will be needed. This just serves to simplify the following patch. No functional change intended. Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20211115234603.2908381-11-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-08KVM: Dynamically allocate "new" memslots from the get-goSean Christopherson1-101/+77
Allocate the "new" memslot for !DELETE memslot updates straight away instead of filling an intermediate on-stack object and forcing kvm_set_memslot() to juggle the allocation and do weird things like reuse the old memslot object in MOVE. In the MOVE case, this results in an "extra" memslot allocation due to allocating both the "new" slot and the "invalid" slot, but that's a temporary and not-huge allocation, and MOVE is a relatively rare memslot operation. Regarding MOVE, drop the open-coded management of the gfn tree with a call to kvm_replace_memslot(), which already handles the case where new->base_gfn != old->base_gfn. This is made possible by virtue of not having to copy the "new" memslot data after erasing the old memslot from the gfn tree. Using kvm_replace_memslot(), and more specifically not reusing the old memslot, means the MOVE case now does hva tree and hash list updates, but that's a small price to pay for simplifying the code and making MOVE align with all the other flavors of updates. The "extra" updates are firmly in the noise from a performance perspective, e.g. the "move (in)active area" selfttests show a (very, very) slight improvement. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Message-Id: <f0d8c72727aa825cf682bd4e3da4b3fa68215dd4.1638817641.git.maciej.szmigiero@oracle.com>
2021-12-08KVM: Wait 'til the bitter end to initialize the "new" memslotSean Christopherson1-17/+20
Initialize the "new" memslot in the !DELETE path only after the various sanity checks have passed. This will allow a future commit to allocate @new dynamically without having to copy a memslot, and without having to deal with freeing @new in error paths and in the "nothing to change" path that's hiding in the sanity checks. No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Message-Id: <a084d0531ca3a826a7f861eb2b08b5d1c06ef265.1638817641.git.maciej.szmigiero@oracle.com>
2021-12-08KVM: Optimize overlapping memslots checkMaciej S. Szmigiero1-14/+22
Do a quick lookup for possibly overlapping gfns when creating or moving a memslot instead of performing a linear scan of the whole memslot set. Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> [sean: tweaked params to avoid churn in future cleanup] Reviewed-by: Sean Christopherson <seanjc@google.com> Message-Id: <a4795e5c2f624754e9c0aab023ebda1966feb3e1.1638817641.git.maciej.szmigiero@oracle.com>
2021-12-08KVM: Call kvm_arch_flush_shadow_memslot() on the old slot in ↵Maciej S. Szmigiero1-1/+1
kvm_invalidate_memslot() kvm_invalidate_memslot() calls kvm_arch_flush_shadow_memslot() on the active, but KVM_MEMSLOT_INVALID slot. Do it on the inactive (but valid) old slot instead since arch code really should not get passed such invalid slot. Note that this means that the "arch" field of the slot provided to kvm_arch_flush_shadow_memslot() may have stale data since this function is called with slots_arch_lock released. Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Message-Id: <813595ecc193d6ae39a87709899d4251523b05f8.1638817641.git.maciej.szmigiero@oracle.com>
2021-12-08KVM: Keep memslots in tree-based structures instead of array-based onesMaciej S. Szmigiero1-368/+393
The current memslot code uses a (reverse gfn-ordered) memslot array for keeping track of them. Because the memslot array that is currently in use cannot be modified every memslot management operation (create, delete, move, change flags) has to make a copy of the whole array so it has a scratch copy to work on. Strictly speaking, however, it is only necessary to make copy of the memslot that is being modified, copying all the memslots currently present is just a limitation of the array-based memslot implementation. Two memslot sets, however, are still needed so the VM continues to run on the currently active set while the requested operation is being performed on the second, currently inactive one. In order to have two memslot sets, but only one copy of actual memslots it is necessary to split out the memslot data from the memslot sets. The memslots themselves should be also kept independent of each other so they can be individually added or deleted. These two memslot sets should normally point to the same set of memslots. They can, however, be desynchronized when performing a memslot management operation by replacing the memslot to be modified by its copy. After the operation is complete, both memslot sets once again point to the same, common set of memslot data. This commit implements the aforementioned idea. For tracking of gfns an ordinary rbtree is used since memslots cannot overlap in the guest address space and so this data structure is sufficient for ensuring that lookups are done quickly. The "last used slot" mini-caches (both per-slot set one and per-vCPU one), that keep track of the last found-by-gfn memslot, are still present in the new code. Co-developed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Message-Id: <17c0cf3663b760a0d3753d4ac08c0753e941b811.1638817641.git.maciej.szmigiero@oracle.com>
2021-12-08KVM: Use interval tree to do fast hva lookup in memslotsMaciej S. Szmigiero1-14/+39
The current memslots implementation only allows quick binary search by gfn, quick lookup by hva is not possible - the implementation has to do a linear scan of the whole memslots array, even though the operation being performed might apply just to a single memslot. This significantly hurts performance of per-hva operations with higher memslot counts. Since hva ranges can overlap between memslots an interval tree is needed for tracking them. [sean: handle interval tree updates in kvm_replace_memslot()] Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Message-Id: <d66b9974becaa9839be9c4e1a5de97b177b4ac20.1638817640.git.maciej.szmigiero@oracle.com>
2021-12-08KVM: Resolve memslot ID via a hash table instead of via a static arrayMaciej S. Szmigiero1-20/+75
Memslot ID to the corresponding memslot mappings are currently kept as indices in static id_to_index array. The size of this array depends on the maximum allowed memslot count (regardless of the number of memslots actually in use). This has become especially problematic recently, when memslot count cap was removed, so the maximum count is now full 32k memslots - the maximum allowed by the current KVM API. Keeping these IDs in a hash table (instead of an array) avoids this problem. Resolving a memslot ID to the actual memslot (instead of its index) will also enable transitioning away from an array-based implementation of the whole memslots structure in a later commit. Co-developed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Message-Id: <117fb2c04320e6cd6cf34f205a72eadb0aa8d5f9.1638817640.git.maciej.szmigiero@oracle.com>
2021-12-08KVM: Move WARN on invalid memslot index to update_memslots()Maciej S. Szmigiero1-2/+4
Since kvm_memslot_move_forward() can theoretically return a negative memslot index even when kvm_memslot_move_backward() returned a positive one (and so did not WARN) let's just move the warning to the common code. Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Message-Id: <eeed890ccb951e7b0dce15bc170eb2661d5b02da.1638817640.git.maciej.szmigiero@oracle.com>
2021-12-08KVM: Integrate gfn_to_memslot_approx() into search_memslots()Maciej S. Szmigiero1-1/+1
s390 arch has gfn_to_memslot_approx() which is almost identical to search_memslots(), differing only in that in case the gfn falls in a hole one of the memslots bordering the hole is returned. Add this lookup mode as an option to search_memslots() so we don't have two almost identical functions for looking up a memslot by its gfn. Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> [sean: tweaked helper names to keep gfn_to_memslot_approx() in s390] Reviewed-by: Sean Christopherson <seanjc@google.com> Message-Id: <171cd89b52c718dbe180ecd909b4437a64a7e2ec.1638817640.git.maciej.szmigiero@oracle.com>
2021-12-08KVM: Don't make a full copy of the old memslot in __kvm_set_memory_region()Sean Christopherson1-22/+13
Stop making a full copy of the old memslot in __kvm_set_memory_region() now that metadata updates are handled by kvm_set_memslot(), i.e. now that the old memslot's dirty bitmap doesn't need to be referenced after the memslot and its pointer is modified/invalidated by kvm_set_memslot(). No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Message-Id: <5dce0946b41bba8c83f6e3424c6955c56bcc9f86.1638817640.git.maciej.szmigiero@oracle.com>
2021-12-08KVM: Use prepare/commit hooks to handle generic memslot metadata updatesSean Christopherson1-43/+66
Handle the generic memslot metadata, a.k.a. dirty bitmap, updates at the same time that arch handles it's own metadata updates, i.e. at memslot prepare and commit. This will simplify converting @new to a dynamically allocated object, and more closely aligns common KVM with architecture code. No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Message-Id: <2ddd5446e3706fe3c1e52e3df279f04c458be830.1638817640.git.maciej.szmigiero@oracle.com>
2021-12-08KVM: Stop passing kvm_userspace_memory_region to arch memslot hooksSean Christopherson1-5/+4
Drop the @mem param from kvm_arch_{prepare,commit}_memory_region() now that its use has been removed in all architectures. No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Message-Id: <aa5ed3e62c27e881d0d8bc0acbc1572bc336dc19.1638817640.git.maciej.szmigiero@oracle.com>
2021-12-08KVM: Let/force architectures to deal with arch specific memslot dataSean Christopherson1-4/+1
Pass the "old" slot to kvm_arch_prepare_memory_region() and force arch code to handle propagating arch specific data from "new" to "old" when necessary. This is a baby step towards dynamically allocating "new" from the get go, and is a (very) minor performance boost on x86 due to not unnecessarily copying arch data. For PPC HV, copy the rmap in the !CREATE and !DELETE paths, i.e. for MOVE and FLAGS_ONLY. This is functionally a nop as the previous behavior would overwrite the pointer for CREATE, and eventually discard/ignore it for DELETE. For x86, copy the arch data only for FLAGS_ONLY changes. Unlike PPC HV, x86 needs to reallocate arch data in the MOVE case as the size of x86's allocations depend on the alignment of the memslot's gfn. Opportunistically tweak kvm_arch_prepare_memory_region()'s param order to match the "commit" prototype. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> [mss: add missing RISCV kvm_arch_prepare_memory_region() change] Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Message-Id: <67dea5f11bbcfd71e3da5986f11e87f5dd4013f9.1638817639.git.maciej.szmigiero@oracle.com>
2021-12-08KVM: Use "new" memslot's address space ID instead of dedicated paramSean Christopherson1-13/+9
Now that the address space ID is stored in every slot, including fake slots used for deletion, use the slot's as_id instead of passing in the redundant information as a param to kvm_set_memslot(). This will greatly simplify future memslot work by avoiding passing a large number of variables around purely to honor @as_id. Drop a comment in the DELETE path about new->as_id being provided purely for debug, as that's now a lie. No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Message-Id: <03189577be214ab8530a4b3a3ee3ed1c2f9e5815.1638817639.git.maciej.szmigiero@oracle.com>
2021-12-08KVM: Resync only arch fields when slots_arch_lock gets reacquiredMaciej S. Szmigiero1-20/+25
There is no need to copy the whole memslot data after releasing slots_arch_lock for a moment to install temporary memslots copy in kvm_set_memslot() since this lock only protects the arch field of each memslot. Just resync this particular field after reacquiring slots_arch_lock. Note, this also eliminates the need to manually clear the INVALID flag when restoring memslots; the "setting" of the INVALID flag was an unwanted side effect of copying the entire memslots. Since kvm_copy_memslots() has just one caller remaining now open-code it instead. Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> [sean: tweak shortlog, note INVALID flag in changelog, revert comment] Reviewed-by: Sean Christopherson <seanjc@google.com> Message-Id: <b63035d114707792e9042f074478337f770dff6a.1638817638.git.maciej.szmigiero@oracle.com>
2021-12-08KVM: Open code kvm_delete_memslot() into its only callerSean Christopherson1-25/+17
Fold kvm_delete_memslot() into __kvm_set_memory_region() to free up the "kvm_delete_memslot()" name for use in a future helper. The delete logic isn't so complex/long that it truly needs a helper, and it will be simplified a wee bit further in upcoming commits. No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Message-Id: <2887631c31a82947faa488ab72f55f8c68b7c194.1638817638.git.maciej.szmigiero@oracle.com>
2021-12-08KVM: Require total number of memslot pages to fit in an unsigned longSean Christopherson1-0/+19
Explicitly disallow creating more memslot pages than can fit in an unsigned long, KVM doesn't correctly handle a total number of memslot pages that doesn't fit in an unsigned long and remedying that would be a waste of time. For a 64-bit kernel, this is a nop as memslots are not allowed to overlap in the gfn address space. With a 32-bit kernel, userspace can at most address 3gb of virtual memory, whereas wrapping the total number of pages would require 4tb+ of guest physical memory. Even with x86's second address space for SMM, userspace would need to alias all of guest memory more than one _thousand_ times. And on older x86 hardware with MAXPHYADDR < 43, the guest couldn't actually access any of those aliases even if userspace lied about guest.MAXPHYADDR. On 390 and arm64, this is a nop as they don't support 32-bit hosts. On x86, practically speaking this is simply acknowledging reality as the existing kvm_mmu_calculate_default_mmu_pages() assumes the total number of pages fits in an "unsigned long". On PPC, this is likely a nop as every flavor of PPC KVM assumes gfns (and gpas!) fit in unsigned long. arch/powerpc/kvm/book3s_32_mmu_host.c goes a step further and fails the build if CONFIG_PTE_64BIT=y, which presumably means that it does't support 64-bit physical addresses. On MIPS, this is also likely a nop as the core MMU helpers assume gpas fit in unsigned long, e.g. see kvm_mips_##name##_pte. And finally, RISC-V is a "don't care" as it doesn't exist in any release, i.e. there is no established ABI to break. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Message-Id: <1c2c91baf8e78acccd4dad38da591002e61c013c.1638817638.git.maciej.szmigiero@oracle.com>
2021-12-08KVM: Use 'unsigned long' as kvm_for_each_vcpu()'s indexMarc Zyngier1-6/+7
Everywhere we use kvm_for_each_vpcu(), we use an int as the vcpu index. Unfortunately, we're about to move rework the iterator, which requires this to be upgrade to an unsigned long. Let's bite the bullet and repaint all of it in one go. Signed-off-by: Marc Zyngier <maz@kernel.org> Message-Id: <20211116160403.4074052-7-maz@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-08KVM: Convert the kvm->vcpus array to a xarrayMarc Zyngier1-6/+9
At least on arm64 and x86, the vcpus array is pretty huge (up to 1024 entries on x86) and is mostly empty in the majority of the cases (running 1k vcpu VMs is not that common). This mean that we end-up with a 4kB block of unused memory in the middle of the kvm structure. Instead of wasting away this memory, let's use an xarray instead, which gives us almost the same flexibility as a normal array, but with a reduced memory usage with smaller VMs. Signed-off-by: Marc Zyngier <maz@kernel.org> Message-Id: <20211116160403.4074052-6-maz@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-08KVM: Move wiping of the kvm->vcpus array to common codeMarc Zyngier1-2/+15
All architectures have similar loops iterating over the vcpus, freeing one vcpu at a time, and eventually wiping the reference off the vcpus array. They are also inconsistently taking the kvm->lock mutex when wiping the references from the array. Make this code common, which will simplify further changes. The locking is dropped altogether, as this should only be called when there is no further references on the kvm structure. Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Message-Id: <20211116160403.4074052-2-maz@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-11-26KVM: downgrade two BUG_ONs to WARN_ON_ONCEPaolo Bonzini1-2/+4
This is not an unrecoverable situation. Users of kvm_read_guest_offset_cached and kvm_write_guest_offset_cached must expect the read/write to fail, and therefore it is possible to just return early with an error value. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-11-18KVM: Disallow user memslot with size that exceeds "unsigned long"Sean Christopherson1-1/+2
Reject userspace memslots whose size exceeds the storage capacity of an "unsigned long". KVM's uAPI takes the size as u64 to support large slots on 64-bit hosts, but does not account for the size being truncated on 32-bit hosts in various flows. The access_ok() check on the userspace virtual address in particular casts the size to "unsigned long" and will check the wrong number of bytes. KVM doesn't actually support slots whose size doesn't fit in an "unsigned long", e.g. KVM's internal kvm_memory_slot.npages is an "unsigned long", not a "u64", and misc arch specific code follows that behavior. Fixes: fa3d315a4ce2 ("KVM: Validate userspace_addr of memslot when registered") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Message-Id: <20211104002531.1176691-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-11 05:26:50 +0000