summaryrefslogtreecommitdiffstats
path: root/virt/kvm/eventfd.c
AgeCommit message (Collapse)AuthorFilesLines
2022-05-20KVM: eventfd: Fix false positive RCU usage warningWanpeng Li1-1/+2
The splat below can be seen when running kvm-unit-test: ============================= WARNING: suspicious RCU usage 5.18.0-rc7 #5 Tainted: G IOE ----------------------------- /home/kernel/linux/arch/x86/kvm/../../../virt/kvm/eventfd.c:80 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 4 locks held by qemu-system-x86/35124: #0: ffff9725391d80b8 (&vcpu->mutex){+.+.}-{4:4}, at: kvm_vcpu_ioctl+0x77/0x710 [kvm] #1: ffffbd25cfb2a0b8 (&kvm->srcu){....}-{0:0}, at: vcpu_enter_guest+0xdeb/0x1900 [kvm] #2: ffffbd25cfb2b920 (&kvm->irq_srcu){....}-{0:0}, at: kvm_hv_notify_acked_sint+0x79/0x1e0 [kvm] #3: ffffbd25cfb2b920 (&kvm->irq_srcu){....}-{0:0}, at: irqfd_resampler_ack+0x5/0x110 [kvm] stack backtrace: CPU: 2 PID: 35124 Comm: qemu-system-x86 Tainted: G IOE 5.18.0-rc7 #5 Call Trace: <TASK> dump_stack_lvl+0x6c/0x9b irqfd_resampler_ack+0xfd/0x110 [kvm] kvm_notify_acked_gsi+0x32/0x90 [kvm] kvm_hv_notify_acked_sint+0xc5/0x1e0 [kvm] kvm_hv_set_msr_common+0xec1/0x1160 [kvm] kvm_set_msr_common+0x7c3/0xf60 [kvm] vmx_set_msr+0x394/0x1240 [kvm_intel] kvm_set_msr_ignored_check+0x86/0x200 [kvm] kvm_emulate_wrmsr+0x4f/0x1f0 [kvm] vmx_handle_exit+0x6fb/0x7e0 [kvm_intel] vcpu_enter_guest+0xe5a/0x1900 [kvm] kvm_arch_vcpu_ioctl_run+0x16e/0xac0 [kvm] kvm_vcpu_ioctl+0x279/0x710 [kvm] __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae resampler-list is protected by irq_srcu (see kvm_irqfd_assign), so fix the false positive by using list_for_each_entry_srcu(). Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Message-Id: <1652950153-12489-1-git-send-email-wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-28KVM: eventfd: Fix false positive RCU usage warningHou Wenlong1-4/+4
Fix the following false positive warning: ============================= WARNING: suspicious RCU usage 5.16.0-rc4+ #57 Not tainted ----------------------------- arch/x86/kvm/../../../virt/kvm/eventfd.c:484 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 3 locks held by fc_vcpu 0/330: #0: ffff8884835fc0b0 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x88/0x6f0 [kvm] #1: ffffc90004c0bb68 (&kvm->srcu){....}-{0:0}, at: vcpu_enter_guest+0x600/0x1860 [kvm] #2: ffffc90004c0c1d0 (&kvm->irq_srcu){....}-{0:0}, at: kvm_notify_acked_irq+0x36/0x180 [kvm] stack backtrace: CPU: 26 PID: 330 Comm: fc_vcpu 0 Not tainted 5.16.0-rc4+ Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x44/0x57 kvm_notify_acked_gsi+0x6b/0x70 [kvm] kvm_notify_acked_irq+0x8d/0x180 [kvm] kvm_ioapic_update_eoi+0x92/0x240 [kvm] kvm_apic_set_eoi_accelerated+0x2a/0xe0 [kvm] handle_apic_eoi_induced+0x3d/0x60 [kvm_intel] vmx_handle_exit+0x19c/0x6a0 [kvm_intel] vcpu_enter_guest+0x66e/0x1860 [kvm] kvm_arch_vcpu_ioctl_run+0x438/0x7f0 [kvm] kvm_vcpu_ioctl+0x38a/0x6f0 [kvm] __x64_sys_ioctl+0x89/0xc0 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Since kvm_unregister_irq_ack_notifier() does synchronize_srcu(&kvm->irq_srcu), kvm->irq_ack_notifier_list is protected by kvm->irq_srcu. In fact, kvm->irq_srcu SRCU read lock is held in kvm_notify_acked_irq(), making it a false positive warning. So use hlist_for_each_entry_srcu() instead of hlist_for_each_entry_rcu(). Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Hou Wenlong <houwenlong93@linux.alibaba.com> Message-Id: <f98bac4f5052bad2c26df9ad50f7019e40434512.1643265976.git.houwenlong.hwl@antgroup.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-30kvm: irqfd: avoid update unmodified entries of the routingLongpeng(Mike)1-1/+14
All of the irqfds would to be updated when update the irq routing, it's too expensive if there're too many irqfds. However we can reduce the cost by avoid some unnecessary updates. For irqs of MSI type on X86, the update can be saved if the msi values are not change. The vfio migration could receives benefit from this optimi- zaiton. The test VM has 128 vcpus and 8 VF (with 65 vectors enabled), so the VM has more than 520 irqfds. We mesure the cost of the vfio_msix_enable (in QEMU, it would set routing for each irqfd) for each VF, and we can see the total cost can be significantly reduced. Origin Apply this Patch 1st 8 4 2nd 15 5 3rd 22 6 4th 24 6 5th 36 7 6th 44 7 7th 51 8 8th 58 8 Total 258ms 51ms We're also tring to optimize the QEMU part [1], but it's still worth to optimize the KVM to gain more benefits. [1] https://lists.gnu.org/archive/html/qemu-devel/2021-08/msg04215.html Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com> Message-Id: <20210827080003.2689-1-longpeng2@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-15kvm/eventfd: Drain events from eventfd in irqfd_wakeup()David Woodhouse1-0/+3
Don't allow the events to accumulate in the eventfd counter, drain them as they are handled. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20201027135523.646811-4-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-15kvm/eventfd: Use priority waitqueue to catch events before userspaceDavid Woodhouse1-2/+4
As far as I can tell, when we use posted interrupts we silently cut off the events from userspace, if it's listening on the same eventfd that feeds the irqfd. I like that behaviour. Let's do it all the time, even without posted interrupts. It makes it much easier to handle IRQ remapping invalidation without having to constantly add/remove the fd from the userspace poll set. We can just leave userspace polling on it, and the bypass will... well... bypass it. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20201026175325.585623-2-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-28kvm/eventfd: move wildcard calculation outside loopYi Li1-1/+3
There is no need to calculate wildcard in each iteration since wildcard is not changed. Signed-off-by: Yi Li <yili@winhong.com> Message-Id: <20200911055652.3041762-1-yili@winhong.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-29kvm/eventfd: Use sequence counter with associated spinlockAhmed S. Darwish1-1/+1
A sequence counter write side critical section must be protected by some form of locking to serialize writers. A plain seqcount_t does not contain the information of which lock must be held when entering a write side critical section. Use the new seqcount_spinlock_t data type, which allows to associate a spinlock with the sequence counter. This enables lockdep to verify that the spinlock used for writer serialization is held when the write side critical section is entered. If lockdep is disabled this lock association is compiled out and has neither storage size nor runtime overhead. Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Link: https://lkml.kernel.org/r/20200720155530.1173732-24-a.darwish@linutronix.de
2020-06-01Merge tag 'kvmarm-5.8' of ↵Paolo Bonzini1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 updates for Linux 5.8: - Move the arch-specific code into arch/arm64/kvm - Start the post-32bit cleanup - Cherry-pick a few non-invasive pre-NV patches
2020-05-16KVM: Fix spelling in code commentsFuad Tabba1-1/+1
Fix spelling and typos (e.g., repeated words) in comments. Signed-off-by: Fuad Tabba <tabba@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200401140310.29701-1-tabba@google.com
2020-05-13kvm/eventfd: remove unneeded conversion to boolJason Yan1-1/+1
The '==' expression itself is bool, no need to convert it to bool again. This fixes the following coccicheck warning: virt/kvm/eventfd.c:724:38-43: WARNING: conversion to bool not needed here Signed-off-by: Jason Yan <yanaijie@huawei.com> Message-Id: <20200420123805.4494-1-yanaijie@huawei.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 504Thomas Gleixner1-13/+1
Based on 1 normalized pattern(s): this file is free software you can redistribute it and or modify it under the terms of version 2 of the gnu general public license as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin st fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 8 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081207.443595178@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24kvm: Check irqchip mode before assign irqfdPeter Xu1-0/+9
When assigning kvm irqfd we didn't check the irqchip mode but we allow KVM_IRQFD to succeed with all the irqchip modes. However it does not make much sense to create irqfd even without the kernel chips. Let's provide a arch-dependent helper to check whether a specific irqfd is allowed by the arch. At least for x86, it should make sense to check: - when irqchip mode is NONE, all irqfds should be disallowed, and, - when irqchip mode is SPLIT, irqfds that are with resamplefd should be disallowed. For either of the case, previously we'll silently ignore the irq or the irq ack event if the irqchip mode is incorrect. However that can cause misterious guest behaviors and it can be hard to triage. Let's fail KVM_IRQFD even earlier to detect these incorrect configurations. CC: Paolo Bonzini <pbonzini@redhat.com> CC: Radim Krčmář <rkrcmar@redhat.com> CC: Alex Williamson <alex.williamson@redhat.com> CC: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-28kvm: don't redefine flags as something elseSebastian Andrzej Siewior1-3/+3
The function irqfd_wakeup() has flags defined as __poll_t and then it has additional flags which is used for irqflags. Redefine the inner flags variable as iflags so it does not shadow the outer flags. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: kvm@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-20kvm: Add memcg accounting to KVM allocationsBen Gardon1-3/+4
There are many KVM kernel memory allocations which are tied to the life of the VM process and should be charged to the VM process's cgroup. If the allocations aren't tied to the process, the OOM killer will not know that killing the process will free the associated kernel memory. Add __GFP_ACCOUNT flags to many of the allocations which are not yet being charged to the VM process's cgroup. Tested: Ran all kvm-unit-tests on a 64 bit Haswell machine, the patch introduced no new failures. Ran a kernel memory accounting test which creates a VM to touch memory and then checks that the kernel memory allocated for the process is within certain bounds. With this patch we account for much more of the vmalloc and slab memory allocated for the VM. There remain a few allocations which should be charged to the VM's cgroup but are not. In they include: vcpu->run kvm->coalesced_mmio_ring There allocations are unaccounted in this patch because they are mapped to userspace, and accounting them to a cgroup causes problems. This should be addressed in a future patch. Signed-off-by: Ben Gardon <bgardon@google.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-18Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-6/+11
Pull kvm fixes from Paolo Bonzini: "Miscellaneous bugfixes, plus a small patchlet related to Spectre v2" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvmclock: fix TSC calibration for nested guests KVM: VMX: Mark VMXArea with revision_id of physical CPU even when eVMCS enabled KVM: irqfd: fix race between EPOLLHUP and irq_bypass_register_consumer KVM/Eventfd: Avoid crash when assign and deassign specific eventfd in parallel. x86/kvmclock: set pvti_cpu0_va after enabling kvmclock x86/kvm/Kconfig: Ensure CRYPTO_DEV_CCP_DD state at minimum matches KVM_AMD kvm: nVMX: Restore exit qual for VM-entry failure due to MSR loading x86/kvm/vmx: don't read current->thread.{fs,gs}base of legacy tasks KVM: VMX: support MSR_IA32_ARCH_CAPABILITIES as a feature MSR
2018-07-18KVM: irqfd: fix race between EPOLLHUP and irq_bypass_register_consumerPaolo Bonzini1-5/+6
A comment warning against this bug is there, but the code is not doing what the comment says. Therefore it is possible that an EPOLLHUP races against irq_bypass_register_consumer. The EPOLLHUP handler schedules irqfd_shutdown, and if that runs soon enough, you get a use-after-free. Reported-by: syzbot <syzkaller@googlegroups.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com>
2018-07-18KVM/Eventfd: Avoid crash when assign and deassign specific eventfd in parallel.Lan Tianyu1-1/+5
Syzbot reports crashes in kvm_irqfd_assign(), caused by use-after-free when kvm_irqfd_assign() and kvm_irqfd_deassign() run in parallel for one specific eventfd. When the assign path hasn't finished but irqfd has been added to kvm->irqfds.items list, another thead may deassign the eventfd and free struct kvm_kernel_irqfd(). The assign path then uses the struct kvm_kernel_irqfd that has been freed by deassign path. To avoid such issue, keep irqfd under kvm->irq_srcu protection after the irqfd has been added to kvm->irqfds.items list, and call synchronize_srcu() in irq_shutdown() to make sure that irqfd has been fully initialized in the assign path. Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Tianyu Lan <tianyu.lan@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-26fs: add new vfs_poll and file_can_poll helpersChristoph Hellwig1-1/+1
These abstract out calls to the poll method in preparation for changes in how we poll. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds1-4/+4
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27annotate poll-related wait keysAl Viro1-1/+1
__poll_t is also used as wait key in some waitqueues. Verify that wait_..._poll() gets __poll_t as key and provide a helper for wakeup functions to get back to that __poll_t value. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-27anntotate the places where ->poll() return values goAl Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-09-19Revert "KVM: Don't accept obviously wrong gsi values via KVM_IRQFD"Jan H. Schönherr1-2/+0
This reverts commit 36ae3c0a36b7456432fedce38ae2f7bd3e01a563. The commit broke compilation on !CONFIG_HAVE_KVM_IRQ_ROUTING. Also, there may be cases with CONFIG_HAVE_KVM_IRQ_ROUTING, where larger gsi values make sense. As the commit was meant as an early indicator to user space that something is wrong, reverting just restores the previous behavior where overly large values are ignored when encountered (without any direct feedback). Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-09-15KVM: Don't accept obviously wrong gsi values via KVM_IRQFDJan H. Schönherr1-0/+2
We cannot add routes for gsi values >= KVM_MAX_IRQ_ROUTES -- see kvm_set_irq_routing(). Hence, there is no sense in accepting them via KVM_IRQFD. Prevent them from entering the system in the first place. Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-10Merge branch 'annotations' of ↵Paolo Bonzini1-3/+5
git://git.kernel.org/pub/scm/linux/kernel/git/borntraeger/linux into kvm-master
2017-07-07KVM: mark kvm->busses as rcu protectedChristian Borntraeger1-3/+5
mark kvm->busses as rcu protected and use the correct access function everywhere. found by sparse virt/kvm/kvm_main.c:3490:15: error: incompatible types in comparison expression (different address spaces) virt/kvm/kvm_main.c:3509:15: error: incompatible types in comparison expression (different address spaces) virt/kvm/kvm_main.c:3561:15: error: incompatible types in comparison expression (different address spaces) virt/kvm/kvm_main.c:3644:15: error: incompatible types in comparison expression (different address spaces) Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-06-20sched/wait: Rename wait_queue_t => wait_queue_entry_tIngo Molnar1-1/+1
Rename: wait_queue_t => wait_queue_entry_t 'wait_queue_t' was always a slight misnomer: its name implies that it's a "queue", but in reality it's a queue *entry*. The 'real' queue is the wait queue head, which had to carry the name. Start sorting this out by renaming it to 'wait_queue_entry_t'. This also allows the real structure name 'struct __wait_queue' to lose its double underscore and become 'struct wait_queue_entry', which is the more canonical nomenclature for such data types. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-04-12KVM: x86: rename kvm_vcpu_request_scan_ioapic()David Hildenbrand1-2/+2
Let's rename it into a proper arch specific callback. Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-23KVM: kvm_io_bus_unregister_dev() should never failDavid Hildenbrand1-1/+2
No caller currently checks the return value of kvm_io_bus_unregister_dev(). This is evil, as all callers silently go on freeing their device. A stale reference will remain in the io_bus, getting at least used again, when the iobus gets teared down on kvm_destroy_vm() - leading to use after free errors. There is nothing the callers could do, except retrying over and over again. So let's simply remove the bus altogether, print an error and make sure no one can access this broken bus again (returning -ENOMEM on any attempt to access it). Fixes: e93f8a0f821e ("KVM: convert io_bus to SRCU") Cc: stable@vger.kernel.org # 3.4+ Reported-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-26KVM: fix OOPS on flush_workPaolo Bonzini1-3/+19
The conversion done by commit 3706feacd007 ("KVM: Remove deprecated create_singlethread_workqueue") is broken. It flushes a single work item &irqfd->shutdown instead of all of them, and even worse if there is no irqfd on the list then you get a NULL pointer dereference. Revert the virt/kvm/eventfd.c part of that patch; to avoid the deprecated function, just allocate our own workqueue---it does not even have to be unbound---with alloc_workqueue. Fixes: 3706feacd007 Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-07KVM: Remove deprecated create_singlethread_workqueueBhaktipriya Shridhar1-19/+3
The workqueue "irqfd_cleanup_wq" queues a single work item &irqfd->shutdown and hence doesn't require ordering. It is a host-wide workqueue for issuing deferred shutdown requests aggregated from all vm* instances. It is not being used on a memory reclaim path. Hence, it has been converted to use system_wq. The work item has been flushed in kvm_irqfd_release(). The workqueue "wqueue" queues a single work item &timer->expired and hence doesn't require ordering. Also, it is not being used on a memory reclaim path. Hence, it has been converted to use system_wq. System workqueues have been able to handle high level of concurrency for a long time now and hence it's not required to have a singlethreaded workqueue just to gain concurrency. Unlike a dedicated per-cpu workqueue created with create_singlethread_workqueue(), system_wq allows multiple work items to overlap executions even on the same CPU; however, a per-cpu workqueue doesn't have any CPU locality or global ordering guarantee unless the target CPU is explicitly specified and thus the increase of local concurrency shouldn't make any difference. Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-11kvm: Conditionally register IRQ bypass consumerAlex Williamson1-8/+10
If we don't support a mechanism for bypassing IRQs, don't register as a consumer. This eliminates meaningless dev_info()s when the connect fails between producer and consumer, such as on AMD systems where kvm_x86_ops->update_pi_irte is not implemented Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-04KVM: x86: merge kvm_arch_set_irq with kvm_set_msi_inatomicPaolo Bonzini1-7/+4
We do not want to do too much work in atomic context, in particular not walking all the VCPUs of the virtual machine. So we want to distinguish the architecture-specific injection function for irqfd from kvm_set_msi. Since it's still empty, reuse the newly added kvm_arch_set_irq and rename it to kvm_arch_set_irq_inatomic. Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-16kvm/eventfd: add arch-specific set_irqAndrey Smetanin1-1/+12
Allow for arch-specific interrupt types to be set. For that, add kvm_arch_set_irq() which takes interrupt type-specific action if it recognizes the interrupt type given, and -EWOULDBLOCK otherwise. The default implementation always returns -EWOULDBLOCK. Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Vitaly Kuznetsov <vkuznets@redhat.com> CC: "K. Y. Srinivasan" <kys@microsoft.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-16kvm/eventfd: factor out kvm_notify_acked_gsi()Andrey Smetanin1-5/+11
Factor out kvm_notify_acked_gsi() helper to iterate over EOI listeners and notify those matching the given gsi. It will be reused in the upcoming Hyper-V SynIC implementation. Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Vitaly Kuznetsov <vkuznets@redhat.com> CC: "K. Y. Srinivasan" <kys@microsoft.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-16kvm/eventfd: avoid loop inside irqfd_update()Andrey Smetanin1-8/+5
The loop(for) inside irqfd_update() is unnecessary because any other value for irq_entry.type will just trigger schedule_work(&irqfd->inject) in irqfd_wakeup. Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Vitaly Kuznetsov <vkuznets@redhat.com> CC: "K. Y. Srinivasan" <kys@microsoft.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: Add an arch specific hooks in 'struct kvm_kernel_irqfd'Feng Wu1-1/+18
This patch adds an arch specific hooks 'arch_update' in 'struct kvm_kernel_irqfd'. On Intel side, it is used to update the IRTE when VT-d posted-interrupts is used. Signed-off-by: Feng Wu <feng.wu@intel.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: eventfd: add irq bypass consumer managementEric Auger1-0/+15
This patch adds the registration/unregistration of an irq_bypass_consumer on irqfd assignment/deassignment. Signed-off-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Feng Wu <feng.wu@intel.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: introduce kvm_arch functions for IRQ bypassEric Auger1-0/+12
This patch introduces - kvm_arch_irq_bypass_add_producer - kvm_arch_irq_bypass_del_producer - kvm_arch_irq_bypass_stop - kvm_arch_irq_bypass_start They make possible to specialize the KVM IRQ bypass consumer in case CONFIG_KVM_HAVE_IRQ_BYPASS is set. Signed-off-by: Eric Auger <eric.auger@linaro.org> [Add weak implementations of the callbacks. - Feng] Signed-off-by: Feng Wu <feng.wu@intel.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: create kvm_irqfd.hEric Auger1-72/+23
Move _irqfd_resampler and _irqfd struct declarations in a new public header: kvm_irqfd.h. They are respectively renamed into kvm_kernel_irqfd_resampler and kvm_kernel_irqfd. Those datatypes will be used by architecture specific code, in the context of IRQ bypass manager integration. Signed-off-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Feng Wu <feng.wu@intel.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01kvm: add capability for any-length ioeventfdsJason Wang1-3/+1
Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-15kvm: fix double free for fast mmio eventfdJason Wang1-18/+25
We register wildcard mmio eventfd on two buses, once for KVM_MMIO_BUS and once on KVM_FAST_MMIO_BUS but with a single iodev instance. This will lead to an issue: kvm_io_bus_destroy() knows nothing about the devices on two buses pointing to a single dev. Which will lead to double free[1] during exit. Fix this by allocating two instances of iodevs then registering one on KVM_MMIO_BUS and another on KVM_FAST_MMIO_BUS. CPU: 1 PID: 2894 Comm: qemu-system-x86 Not tainted 3.19.0-26-generic #28-Ubuntu Hardware name: LENOVO 2356BG6/2356BG6, BIOS G7ET96WW (2.56 ) 09/12/2013 task: ffff88009ae0c4b0 ti: ffff88020e7f0000 task.ti: ffff88020e7f0000 RIP: 0010:[<ffffffffc07e25d8>] [<ffffffffc07e25d8>] ioeventfd_release+0x28/0x60 [kvm] RSP: 0018:ffff88020e7f3bc8 EFLAGS: 00010292 RAX: dead000000200200 RBX: ffff8801ec19c900 RCX: 000000018200016d RDX: ffff8801ec19cf80 RSI: ffffea0008bf1d40 RDI: ffff8801ec19c900 RBP: ffff88020e7f3bd8 R08: 000000002fc75a01 R09: 000000018200016d R10: ffffffffc07df6ae R11: ffff88022fc75a98 R12: ffff88021e7cc000 R13: ffff88021e7cca48 R14: ffff88021e7cca50 R15: ffff8801ec19c880 FS: 00007fc1ee3e6700(0000) GS:ffff88023e240000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8f389d8000 CR3: 000000023dc13000 CR4: 00000000001427e0 Stack: ffff88021e7cc000 0000000000000000 ffff88020e7f3be8 ffffffffc07e2622 ffff88020e7f3c38 ffffffffc07df69a ffff880232524160 ffff88020e792d80 0000000000000000 ffff880219b78c00 0000000000000008 ffff8802321686a8 Call Trace: [<ffffffffc07e2622>] ioeventfd_destructor+0x12/0x20 [kvm] [<ffffffffc07df69a>] kvm_put_kvm+0xca/0x210 [kvm] [<ffffffffc07df818>] kvm_vcpu_release+0x18/0x20 [kvm] [<ffffffff811f69f7>] __fput+0xe7/0x250 [<ffffffff811f6bae>] ____fput+0xe/0x10 [<ffffffff81093f04>] task_work_run+0xd4/0xf0 [<ffffffff81079358>] do_exit+0x368/0xa50 [<ffffffff81082c8f>] ? recalc_sigpending+0x1f/0x60 [<ffffffff81079ad5>] do_group_exit+0x45/0xb0 [<ffffffff81085c71>] get_signal+0x291/0x750 [<ffffffff810144d8>] do_signal+0x28/0xab0 [<ffffffff810f3a3b>] ? do_futex+0xdb/0x5d0 [<ffffffff810b7028>] ? __wake_up_locked_key+0x18/0x20 [<ffffffff810f3fa6>] ? SyS_futex+0x76/0x170 [<ffffffff81014fc9>] do_notify_resume+0x69/0xb0 [<ffffffff817cb9af>] int_signal+0x12/0x17 Code: 5d c3 90 0f 1f 44 00 00 55 48 89 e5 53 48 89 fb 48 83 ec 08 48 8b 7f 20 e8 06 d6 a5 c0 48 8b 43 08 48 8b 13 48 89 df 48 89 42 08 <48> 89 10 48 b8 00 01 10 00 00 RIP [<ffffffffc07e25d8>] ioeventfd_release+0x28/0x60 [kvm] RSP <ffff88020e7f3bc8> Cc: stable@vger.kernel.org Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-15kvm: factor out core eventfd assign/deassign logicJason Wang1-35/+50
This patch factors out core eventfd assign/deassign logic and leaves the argument checking and bus index selection to callers. Cc: stable@vger.kernel.org Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-15kvm: don't try to register to KVM_FAST_MMIO_BUS for non mmio eventfdJason Wang1-2/+2
We only want zero length mmio eventfd to be registered on KVM_FAST_MMIO_BUS. So check this explicitly when arg->len is zero to make sure this. Cc: stable@vger.kernel.org Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-26KVM: move iodev.h from virt/kvm/ to include/kvmAndre Przywara1-1/+1
iodev.h contains definitions for the kvm_io_bus framework. This is needed both by the generic KVM code in virt/kvm as well as by architecture specific code under arch/. Putting the header file in virt/kvm and using local includes in the architecture part seems at least dodgy to me, so let's move the file into include/kvm, so that a more natural "#include <kvm/iodev.h>" can be used by all of the code. This also solves a problem later when using struct kvm_io_device in arm_vgic.h. Fixing up the FSF address in the GPL header and a wrong include path on the way. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-03-26KVM: Redesign kvm_io_bus_ API to pass VCPU structure to the callbacks.Nikolay Nikolaev1-2/+2
This is needed in e.g. ARM vGIC emulation, where the MMIO handling depends on the VCPU that does the access. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-03-12KVM: introduce kvm_arch_intc_initialized and use it in irqfdEric Auger1-0/+3
Introduce __KVM_HAVE_ARCH_INTC_INITIALIZED define and associated kvm_arch_intc_initialized function. This latter allows to test whether the virtual interrupt controller is initialized and ready to accept virtual IRQ injection. On some architectures, the virtual interrupt controller is dynamically instantiated, justifying that kind of check. The new function can now be used by irqfd to check whether the virtual interrupt controller is ready on KVM_IRQFD request. If not, KVM_IRQFD returns -EAGAIN. Signed-off-by: Eric Auger <eric.auger@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-11-21kvm: x86: move ioapic.c and irq_comm.c back to arch/x86/Paolo Bonzini1-7/+0
ia64 does not need them anymore. Ack notifiers become x86-specific too. Suggested-by: Gleb Natapov <gleb@kernel.org> Reviewed-by: Radim Krcmar <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-24KVM: EVENTFD: Remove inclusion of irq.hChristoffer Dall1-1/+3
Commit c77dcac (KVM: Move more code under CONFIG_HAVE_KVM_IRQFD) added functionality that depends on definitions in ioapic.h when __KVM_HAVE_IOAPIC is defined. At the same time, kvm-arm commit 0ba0951 (KVM: EVENTFD: remove inclusion of irq.h) removed the inclusion of irq.h, an architecture-specific header that is not present on ARM but which happened to include ioapic.h on x86. Include ioapic.h directly in eventfd.c if __KVM_HAVE_IOAPIC is defined. This fixes x86 and lets ARM use eventfd.c. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-06KVM: Move more code under CONFIG_HAVE_KVM_IRQFDPaolo Bonzini1-61/+61
Commits e4d57e1ee1ab (KVM: Move irq notifier implementation into eventfd.c, 2014-06-30) included the irq notifier code unconditionally in eventfd.c, while it was under CONFIG_HAVE_KVM_IRQCHIP before. Similarly, commit 297e21053a52 (KVM: Give IRQFD its own separate enabling Kconfig option, 2014-06-30) moved code from CONFIG_HAVE_IRQ_ROUTING to CONFIG_HAVE_KVM_IRQFD but forgot to move the pieces that used to be under CONFIG_HAVE_KVM_IRQCHIP. Together, this broke compilation without CONFIG_KVM_XICS. Fix by adding or changing the #ifdefs so that they point at CONFIG_HAVE_KVM_IRQFD. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-05KVM: Give IRQFD its own separate enabling Kconfig optionPaul Mackerras1-3/+3
Currently, the IRQFD code is conditional on CONFIG_HAVE_KVM_IRQ_ROUTING. So that we can have the IRQFD code compiled in without having the IRQ routing code, this creates a new CONFIG_HAVE_KVM_IRQFD, makes the IRQFD code conditional on it instead of CONFIG_HAVE_KVM_IRQ_ROUTING, and makes all the platforms that currently select HAVE_KVM_IRQ_ROUTING also select HAVE_KVM_IRQFD. Signed-off-by: Paul Mackerras <paulus@samba.org> Tested-by: Eric Auger <eric.auger@linaro.org> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-05 20:12:47 +0000