| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, wifi, and netfilter.
Current release - regressions:
- bpf: fix nullness propagation for reg to reg comparisons, avoid
null-deref
- inet: control sockets should not use current thread task_frag
- bpf: always use maximal size for copy_array()
- eth: bnxt_en: don't link netdev to a devlink port for VFs
Current release - new code bugs:
- rxrpc: fix a couple of potential use-after-frees
- netfilter: conntrack: fix IPv6 exthdr error check
- wifi: iwlwifi: fw: skip PPAG for JF, avoid FW crashes
- eth: dsa: qca8k: various fixes for the in-band register access
- eth: nfp: fix schedule in atomic context when sync mc address
- eth: renesas: rswitch: fix getting mac address from device tree
- mobile: ipa: use proper endpoint mask for suspend
Previous releases - regressions:
- tcp: add TIME_WAIT sockets in bhash2, fix regression caught by
Jiri / python tests
- net: tc: don't intepret cls results when asked to drop, fix
oob-access
- vrf: determine the dst using the original ifindex for multicast
- eth: bnxt_en:
- fix XDP RX path if BPF adjusted packet length
- fix HDS (header placement) and jumbo thresholds for RX packets
- eth: ice: xsk: do not use xdp_return_frame() on tx_buf->raw_buf,
avoid memory corruptions
Previous releases - always broken:
- ulp: prevent ULP without clone op from entering the LISTEN status
- veth: fix race with AF_XDP exposing old or uninitialized
descriptors
- bpf:
- pull before calling skb_postpull_rcsum() (fix checksum support
and avoid a WARN())
- fix panic due to wrong pageattr of im->image (when livepatch and
kretfunc coexist)
- keep a reference to the mm, in case the task is dead
- mptcp: fix deadlock in fastopen error path
- netfilter:
- nf_tables: perform type checking for existing sets
- nf_tables: honor set timeout and garbage collection updates
- ipset: fix hash:net,port,net hang with /0 subnet
- ipset: avoid hung task warning when adding/deleting entries
- selftests: net:
- fix cmsg_so_mark.sh test hang on non-x86 systems
- fix the arp_ndisc_evict_nocarrier test for IPv6
- usb: rndis_host: secure rndis_query check against int overflow
- eth: r8169: fix dmar pte write access during suspend/resume with
WOL
- eth: lan966x: fix configuration of the PCS
- eth: sparx5: fix reading of the MAC address
- eth: qed: allow sleep in qed_mcp_trace_dump()
- eth: hns3:
- fix interrupts re-initialization after VF FLR
- fix handling of promisc when MAC addr table gets full
- refine the handling for VF heartbeat
- eth: mlx5:
- properly handle ingress QinQ-tagged packets on VST
- fix io_eq_size and event_eq_size params validation on big endian
- fix RoCE setting at HCA level if not supported at all
- don't turn CQE compression on by default for IPoIB
- eth: ena:
- fix toeplitz initial hash key value
- account for the number of XDP-processed bytes in interface stats
- fix rx_copybreak value update
Misc:
- ethtool: harden phy stat handling against buggy drivers
- docs: netdev: convert maintainer's doc from FAQ to a normal
document"
* tag 'net-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits)
caif: fix memory leak in cfctrl_linkup_request()
inet: control sockets should not use current thread task_frag
net/ulp: prevent ULP without clone op from entering the LISTEN status
qed: allow sleep in qed_mcp_trace_dump()
MAINTAINERS: Update maintainers for ptp_vmw driver
usb: rndis_host: Secure rndis_query check against int overflow
net: dpaa: Fix dtsec check for PCS availability
octeontx2-pf: Fix lmtst ID used in aura free
drivers/net/bonding/bond_3ad: return when there's no aggregator
netfilter: ipset: Rework long task execution when adding/deleting entries
netfilter: ipset: fix hash:net,port,net hang with /0 subnet
net: sparx5: Fix reading of the MAC address
vxlan: Fix memory leaks in error path
net: sched: htb: fix htb_classify() kernel-doc
net: sched: cbq: dont intepret cls results when asked to drop
net: sched: atm: dont intepret cls results when asked to drop
dt-bindings: net: marvell,orion-mdio: Fix examples
dt-bindings: net: sun8i-emac: Add phy-supply property
net: ipa: use proper endpoint mask for suspend
selftests: net: return non-zero for failures reported in arp_ndisc_evict_nocarrier
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Alexei Starovoitov says:
====================
bpf 2023-01-04
We've added 5 non-merge commits during the last 8 day(s) which contain
a total of 5 files changed, 112 insertions(+), 18 deletions(-).
The main changes are:
1) Always use maximal size for copy_array in the verifier to fix
KASAN tracking, from Kees.
2) Fix bpf task iterator walking through dead tasks, from Kui-Feng.
3) Make sure livepatch and bpf fexit can coexist, from Chuang.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Always use maximal size for copy_array()
selftests/bpf: add a test for iter/task_vma for short-lived processes
bpf: keep a reference to the mm, in case the task is dead.
selftests/bpf: Temporarily disable part of btf_dump:var_data test.
bpf: Fix panic due to wrong pageattr of im->image
====================
Link: https://lore.kernel.org/r/20230104215500.79435-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull virtio updates from Michael Tsirkin:
"Mostly fixes all over the place, a couple of cleanups"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (32 commits)
virtio_blk: Fix signedness bug in virtblk_prep_rq()
vdpa_sim_net: should not drop the multicast/broadcast packet
vdpasim: fix memory leak when freeing IOTLBs
vdpa: conditionally fill max max queue pair for stats
vdpa/vp_vdpa: fix kfree a wrong pointer in vp_vdpa_remove
vduse: Validate vq_num in vduse_validate_config()
tools/virtio: remove smp_read_barrier_depends()
tools/virtio: remove stray characters
vhost_vdpa: fix the crash in unmap a large memory
virtio: Implementing attribute show with sysfs_emit
virtio-crypto: fix memory leak in virtio_crypto_alg_skcipher_close_session()
tools/virtio: Variable type completion
vdpa_sim: fix vringh initialization in vdpasim_queue_ready()
virtio_blk: use UINT_MAX instead of -1U
vhost-vdpa: fix an iotlb memory leak
vhost: fix range used in translate_desc()
vringh: fix range used in iotlb_translate()
vhost/vsock: Fix error handling in vhost_vsock_init()
vdpa_sim: fix possible memory leak in vdpasim_net_init() and vdpasim_blk_init()
tools: Delete the unneeded semicolon after curly braces
...
|
|
Not all libc implementations define ssize_t as part of stdio.h like
glibc does since the standard only requires this type to be defined by
unistd.h and sys/types.h. For this reason the perf build is currently
broken for toolchains based on uClibc, for instance.
Include sys/types.h explicitly to fix that.
Committer notes:
In addition, in the past this worked in uClibc test systems as there was
another way to get to sys/types.h that got removed in that cset:
tools/perf/util/trace-event.h
/usr/include/traceevent/event_parse.h # This got removed from util/trace-event.h in 378ef0f5d9d7f465
/usr/include/regex.h
/usr/include/sys/types.h
typedef __ssize_t ssize_t;
So the size_t that is used in tools/perf/util/trace-event.h was being
obtained indirectly, by chance.
Fixes: 378ef0f5d9d7f465 ("perf build: Use libtraceevent from the system")
Signed-off-by: Jesus Sanchez-Palencia <jesussanp@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20230104193414.606905-1-jesussanp@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
non BPF mode
The --for-each-cgroup can have the same cgroup multiple times, but this
confuses BPF counters (since they have the same cgroup id), making only
the last cgroup events to be counted.
Let's check the cgroup name before adding a new entry to the cgroups
list.
Before:
$ sudo ./perf stat -a --bpf-counters --for-each-cgroup /,/ sleep 1
Performance counter stats for 'system wide':
<not counted> msec cpu-clock /
<not counted> context-switches /
<not counted> cpu-migrations /
<not counted> page-faults /
<not counted> cycles /
<not counted> instructions /
<not counted> branches /
<not counted> branch-misses /
8,016.04 msec cpu-clock / # 7.998 CPUs utilized
6,152 context-switches / # 767.461 /sec
250 cpu-migrations / # 31.187 /sec
442 page-faults / # 55.139 /sec
613,111,487 cycles / # 0.076 GHz
280,599,604 instructions / # 0.46 insn per cycle
57,692,724 branches / # 7.197 M/sec
3,385,168 branch-misses / # 5.87% of all branches
1.002220125 seconds time elapsed
After it becomes similar to the non-BPF mode:
$ sudo ./perf stat -a --bpf-counters --for-each-cgroup /,/ sleep 1
Performance counter stats for 'system wide':
8,013.38 msec cpu-clock / # 7.998 CPUs utilized
6,859 context-switches / # 855.944 /sec
334 cpu-migrations / # 41.680 /sec
345 page-faults / # 43.053 /sec
782,326,119 cycles / # 0.098 GHz
471,645,724 instructions / # 0.60 insn per cycle
94,963,430 branches / # 11.851 M/sec
3,685,511 branch-misses / # 3.88% of all branches
1.001864539 seconds time elapsed
Committer notes:
As a reminder, to test with BPF counters one has to use BUILD_BPF_SKEL=1
in the make command line and have clang/llvm installed when building
perf, otherwise the --bpf-counters option will not be available:
# perf stat -a --bpf-counters --for-each-cgroup /,/ sleep 1
Error: unknown option `bpf-counters'
Usage: perf stat [<options>] [<command>]
-a, --all-cpus system-wide collection from all CPUs
<SNIP>
#
Fixes: bb1c15b60b981d10 ("perf stat: Support regex pattern in --for-each-cgroup")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: bpf@vger.kernel.org
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/r/20230104064402.1551516-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When --for-each-cgroup option is used, it fails when any of events is
not supported and exits immediately. This is not how 'perf stat'
handles unsupported events.
Let's ignore the failure and proceed with others so that the output is
similar to when BPF counters are not used:
Before:
$ sudo ./perf stat -a --bpf-counters -e L1-icache-loads,L1-dcache-loads --for-each-cgroup system.slice,user.slice sleep 1
Failed to open first cgroup events
$
After it shows output similat to when --bpf-counters isn't specified:
$ sudo ./perf stat -a --bpf-counters -e L1-icache-loads,L1-dcache-loads --for-each-cgroup system.slice,user.slice sleep 1
Performance counter stats for 'system wide':
<not supported> L1-icache-loads system.slice
29,892,418 L1-dcache-loads system.slice
<not supported> L1-icache-loads user.slice
52,497,220 L1-dcache-loads user.slice
$
Fixes: 944138f048f7d759 ("perf stat: Enable BPF counter with --for-each-cgroup")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/r/20230104064402.1551516-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
'text_to_binary_address' now appears on the backtrace
perf test '84: probe libc's inet_pton & backtrace it with ping' fails on
s390. Debugging revealed a changed stack trace for the ping command
using probes:
ping 35729 [002] 8006.365063: probe_libc:inet_pton: (3ff9603e7c0)
13e7c0 __GI___inet_pton+0x0 (/usr/lib64/libc.so.6)
---> 104371 text_to_binary_address+0xef1 (inlined)
104371 gaih_inet+0xef1 (inlined)
104371 __GI_getaddrinfo+0xef1 (inlined)
5d4b main+0x139b (/usr/bin/ping)
The line "---> text_to_binary_address ..." is new. It was introduced
with glibc version 2.36.7.2 released with Fedora 37 for s390.
Output before
# perf test inet_pton
84: probe libc's inet_pton & backtrace it with ping : FAILED!
#
Output after:
# perf test inet_pton
84: probe libc's inet_pton & backtrace it with ping : Ok
#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20221228145704.2702487-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Commit cf4694be2b2cf ("tools: Add atomic_test_and_set_bit()") changed
tools/arch/x86/include/asm/atomic.h to include <asm/asm.h>, which causes
'make -C tools/testing/memblock' to fail with:
In file included from ../../include/asm/atomic.h:6,
from ../../include/linux/atomic.h:5,
from ./linux/mmzone.h:5,
from ../../include/linux/mm.h:5,
from ../../include/linux/pfn.h:5,
from ./linux/memory_hotplug.h:6,
from ./linux/init.h:7,
from ./linux/memblock.h:11,
from tests/common.h:8,
from tests/basic_api.h:5,
from main.c:2:
../../include/asm/../../arch/x86/include/asm/atomic.h:11:10: fatal error: asm/asm.h: No such file or directory
11 | #include <asm/asm.h>
| ^~~~~~~~~~~
Create a symlink to asm/asm.h in the same manner as the existing one to
asm/cmpxchg.h.
Signed-off-by: Aaron Thompson <dev@aaront.org>
Link: https://lore.kernel.org/r/010101857c402765-96e2dbc6-b82b-47e2-a437-4834dbe0b96b-000000@us-west-2.amazonses.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
|
|
"__sched_text_end" symbol on s/390
The test case perf lock contention dumps core on s390. Run the following
commands:
# ./perf lock record -- ./perf bench sched messaging
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 2.799 [sec]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.073 MB perf.data (100 samples) ]
#
# ./perf lock contention
Segmentation fault (core dumped)
#
The function call stack is lengthy, here are the top 5 functions:
# gdb ./perf core.24048
GNU gdb (GDB) Fedora Linux 12.1-6.fc37
Core was generated by `./perf lock contention'.
Program terminated with signal SIGSEGV, Segmentation fault.
#0 0x00000000011dd25c in machine__is_lock_function (machine=0x3029e28, addr=1789230) at util/machine.c:3356
3356 machine->sched.text_end = kmap->unmap_ip(kmap, sym->start);
(gdb) where
#0 0x00000000011dd25c in machine__is_lock_function (machine=0x3029e28, addr=1789230) at util/machine.c:3356
#1 0x000000000109f244 in callchain_id (evsel=0x30313e0, sample=0x3ffea4f77d0) at builtin-lock.c:957
#2 0x000000000109e094 in get_key_by_aggr_mode (key=0x3ffea4f7290, addr=27758136, evsel=0x30313e0, sample=0x3ffea4f77d0) at builtin-lock.c:586
#3 0x000000000109f4d0 in report_lock_contention_begin_event (evsel=0x30313e0, sample=0x3ffea4f77d0) at builtin-lock.c:1004
#4 0x00000000010a00ae in evsel__process_contention_begin (evsel=0x30313e0, sample=0x3ffea4f77d0) at builtin-lock.c:1254
#5 0x00000000010a0e14 in process_sample_event (tool=0x3ffea4f8480, event=0x3ff85601ef8, sample=0x3ffea4f77d0, evsel=0x30313e0, machine=0x3029e28) at builtin-lock.c:1464
.....
The issue is in function machine__is_lock_function() in file
./util/machine.c lines 3355:
/* should not fail from here */
sym = machine__find_kernel_symbol_by_name(machine, "__sched_text_end", &kmap);
machine->sched.text_end = kmap->unmap_ip(kmap, sym->start)
On s390 the symbol __sched_text_end is *NOT* in the symbol list and the
resulting pointer sym is set to NULL. The sym->start is then a NULL pointer
access and generates the core dump.
The reason why __sched_text_end is not in the symbol list on s390 is
simple:
When the symbol list is created at perf start up with function calls
dso__load
+--> dso__load_vmlinux_path
+--> dso__load_vmlinux
+--> dso__load_sym
+--> dso__load_sym_internal (reads kernel symbols)
+--> symbols__fixup_end
+--> symbols__fixup_duplicate
The issue is in function symbols__fixup_duplicate(). It deletes all
symbols with have the same address. On s390:
# nm -g ~/linux/vmlinux| fgrep c68390
0000000000c68390 T __cpuidle_text_start
0000000000c68390 T __sched_text_end
#
two symbols have identical addresses and __sched_text_end is considered
duplicate (in ascending sort order) and removed from the symbol list.
Therefore it is missing and an invalid pointer reference occurs. The
code checks for symbol __sched_text_start and when it exists assumes
symbol __sched_text_end is also in the symbol table. However this is not
the case on s390.
Same situation exists for symbol __lock_text_start:
0000000000c68770 T __cpuidle_text_end
0000000000c68770 T __lock_text_start
This symbol is also removed from the symbol table but used in function
machine__is_lock_function().
To fix this and keep duplicate symbols in the symbol table, set
symbol_conf.allow_aliases to true. This prevents the removal of
duplicate symbols in function symbols__fixup_duplicate().
Output After:
# ./perf lock contention
contended total wait max wait avg wait type caller
48 124.39 ms 123.99 ms 2.59 ms rwsem:W unlink_anon_vmas+0x24a
47 83.68 ms 83.26 ms 1.78 ms rwsem:W free_pgtables+0x132
5 41.22 us 10.55 us 8.24 us rwsem:W free_pgtables+0x140
4 40.12 us 20.55 us 10.03 us rwsem:W copy_process+0x1ac8
#
Fixes: 0d2997f750d1de39 ("perf lock: Look up callchain for the contended locks")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20221230102627.2410847-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
subdir is added to the OUTPUT which fails as part of building
install_headers when passed from "make -C tools perf_install".
Committer testing:
The original reporter (see the Link: below) had trouble with this:
$ make -C tools perf_install
That ended up with errors like this:
/var/home/acme/git/perf-urgent/tools/scripts/Makefile.include:17: *** output directory "/var/home/acme/git/perf-urgent/tools/perf/libperf/perf/" does not exist. Stop.
With this patch applied we now get it installed at:
INSTALL /var/home/acme/git/perf-urgent/tools/perf/libperf/include/perf/bpf_perf.h
As expected:
$ ls -la /var/home/acme/git/perf-urgent/tools/perf/libperf/include/perf/bpf_perf.h
-rw-r--r--. 1 acme acme 1146 Jan 3 15:42 /var/home/acme/git/perf-urgent/tools/perf/libperf/include/perf/bpf_perf.h
And if we clean tools with:
$ make -C tools clean
it gets cleaned up:
$ ls -la /var/home/acme/git/perf-urgent/tools/perf/libperf/include/perf/bpf_perf.h
ls: cannot access '/var/home/acme/git/perf-urgent/tools/perf/libperf/include/perf/bpf_perf.h': No such file or directory
$
Fixes: 746bd29e348f99b4 ("perf build: Use tools/lib headers from install path")
Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/fa4b3115-d555-3d7f-54d1-018002e99350@secunet.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
backtrace in glibc >= 2.35
Starting with glibc 2.35 there are extra inet_pton() calls when doing a
IPv6 ping as in one of the 'perf test' entry, which makes it fail:
# perf test inet_pton
89: probe libc's inet_pton & backtrace it with ping : FAILED!
#
If we look at what this script is expecting (commenting out the removal
of the temporary files in it):
# cat /tmp/expected.aT6
ping[][0-9 \.:]+probe_libc:inet_pton: \([[:xdigit:]]+\)
.*inet_pton\+0x[[:xdigit:]]+[[:space:]]\(/usr/lib64/libc.so.6|inlined\)$
getaddrinfo\+0x[[:xdigit:]]+[[:space:]]\(/usr/lib64/libc.so.6\)$
.*(\+0x[[:xdigit:]]+|\[unknown\])[[:space:]]\(.*/bin/ping.*\)$
#
And looking at what we are getting out of 'perf script', to match with
the above:
# cat /tmp/perf.script.IUC
ping 623883 [006] 265438.471610: probe_libc:inet_pton: (7f32bcf314c0)
1314c0 __GI___inet_pton+0x0 (/usr/lib64/libc.so.6)
29510 __libc_start_call_main+0x80 (/usr/lib64/libc.so.6)
ping 623883 [006] 265438.471664: probe_libc:inet_pton: (7f32bcf314c0)
1314c0 __GI___inet_pton+0x0 (/usr/lib64/libc.so.6)
fa6c6 getaddrinfo+0x126 (/usr/lib64/libc.so.6)
491e [unknown] (/usr/bin/ping)
#
We see that its just the first call to inet_pton() that didn't came thru
getaddrinfo(), so if we ignore the first the script matches what it
expects, testing that using 'perf probe' + 'perf record' + 'perf script'
with callchains on userspace targets is producing the expected results.
Since we don't have a 'perf script --skip' to help us here, use tac +
grep to do that, resulting in a one liner that makes this script work on
both older glibc versions as well as with 2.35.
With it, on fedora 36, x86, glibc 2.35:
# perf test inet_pton
90: probe libc's inet_pton & backtrace it with ping : Ok
# perf test -v inet_pton
90: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 627197
ping 627220 1 267956.962402: probe_libc:inet_pton_1: (7f488bf314c0)
1314c0 __GI___inet_pton+0x0 (/usr/lib64/libc.so.6)
fa6c6 getaddrinfo+0x126 (/usr/lib64/libc.so.6)
491e n (/usr/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
#
And on Ubuntu 22.04.1 LTS on a Libre Computer ROC-RK3399-PC arm64 system:
Before this patch it works (see that the script used has no 'tac' to
remove the first event):
root@roc-rk3399-pc:~# dpkg -l | grep libc-bin
ii libc-bin 2.35-0ubuntu3.1 arm64 GNU C Library: Binaries
root@roc-rk3399-pc:~# grep -w tac ~acme/libexec/perf-core/tests/shell/record+probe_libc_inet_pton.sh
root@roc-rk3399-pc:~# perf test inet_pton
86: probe libc's inet_pton & backtrace it with ping : Ok
root@roc-rk3399-pc:~# perf test -v inet_pton
86: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 1375
ping 1399 [000] 4114.417450: probe_libc:inet_pton: (ffffb3e26120)
106120 inet_pton+0x0 (/usr/lib/aarch64-linux-gnu/libc.so.6)
d18bc getaddrinfo+0xec (/usr/lib/aarch64-linux-gnu/libc.so.6)
2b68 [unknown] (/usr/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
root@roc-rk3399-pc:~#
And after it continues to work:
root@roc-rk3399-pc:~# grep -w tac ~acme/libexec/perf-core/tests/shell/record+probe_libc_inet_pton.sh
perf script -i $perf_data | tac | grep -m1 ^ping -B9 | tac > $perf_script
root@roc-rk3399-pc:~# perf test inet_pton
86: probe libc's inet_pton & backtrace it with ping : Ok
root@roc-rk3399-pc:~# perf test -v inet_pton
86: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 6995
ping 7019 [005] 4832.160741: probe_libc:inet_pton: (ffffa62e6120)
106120 inet_pton+0x0 (/usr/lib/aarch64-linux-gnu/libc.so.6)
d18bc getaddrinfo+0xec (/usr/lib/aarch64-linux-gnu/libc.so.6)
2b68 [unknown] (/usr/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
root@roc-rk3399-pc:~#
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/Y7QyPkPlDYip3cZH@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
not linked with libtraceevent
When we have a perf.data file with tracepoints, such as:
# perf evlist -f
probe_perf:lzma_decompress_to_file
# Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events
#
We end up segfaulting when using perf built with NO_LIBTRACEEVENT=1 by
trying to find an evsel with a NULL 'event_name' variable:
(gdb) run report --stdio -f
Starting program: /root/bin/perf report --stdio -f
Program received signal SIGSEGV, Segmentation fault.
0x000000000055219d in find_evsel (evlist=0xfda7b0, event_name=0x0) at util/sort.c:2830
warning: Source file is more recent than executable.
2830 if (event_name[0] == '%') {
Missing separate debuginfos, use: dnf debuginfo-install bzip2-libs-1.0.8-11.fc36.x86_64 cyrus-sasl-lib-2.1.27-18.fc36.x86_64 elfutils-debuginfod-client-0.188-3.fc36.x86_64 elfutils-libelf-0.188-3.fc36.x86_64 elfutils-libs-0.188-3.fc36.x86_64 glibc-2.35-20.fc36.x86_64 keyutils-libs-1.6.1-4.fc36.x86_64 krb5-libs-1.19.2-12.fc36.x86_64 libbrotli-1.0.9-7.fc36.x86_64 libcap-2.48-4.fc36.x86_64 libcom_err-1.46.5-2.fc36.x86_64 libcurl-7.82.0-12.fc36.x86_64 libevent-2.1.12-6.fc36.x86_64 libgcc-12.2.1-4.fc36.x86_64 libidn2-2.3.4-1.fc36.x86_64 libnghttp2-1.51.0-1.fc36.x86_64 libpsl-0.21.1-5.fc36.x86_64 libselinux-3.3-4.fc36.x86_64 libssh-0.9.6-4.fc36.x86_64 libstdc++-12.2.1-4.fc36.x86_64 libunistring-1.0-1.fc36.x86_64 libunwind-1.6.2-2.fc36.x86_64 libxcrypt-4.4.33-4.fc36.x86_64 libzstd-1.5.2-2.fc36.x86_64 numactl-libs-2.0.14-5.fc36.x86_64 opencsd-1.2.0-1.fc36.x86_64 openldap-2.6.3-1.fc36.x86_64 openssl-libs-3.0.5-2.fc36.x86_64 slang-2.3.2-11.fc36.x86_64 xz-libs-5.2.5-9.fc36.x86_64 zlib-1.2.11-33.fc36.x86_64
(gdb) bt
#0 0x000000000055219d in find_evsel (evlist=0xfda7b0, event_name=0x0) at util/sort.c:2830
#1 0x0000000000552416 in add_dynamic_entry (evlist=0xfda7b0, tok=0xffb6eb "trace", level=2) at util/sort.c:2976
#2 0x0000000000552d26 in sort_dimension__add (list=0xf93e00 <perf_hpp_list>, tok=0xffb6eb "trace", evlist=0xfda7b0, level=2) at util/sort.c:3193
#3 0x0000000000552e1c in setup_sort_list (list=0xf93e00 <perf_hpp_list>, str=0xffb6eb "trace", evlist=0xfda7b0) at util/sort.c:3227
#4 0x00000000005532fa in __setup_sorting (evlist=0xfda7b0) at util/sort.c:3381
#5 0x0000000000553cdc in setup_sorting (evlist=0xfda7b0) at util/sort.c:3608
#6 0x000000000042eb9f in cmd_report (argc=0, argv=0x7fffffffe470) at builtin-report.c:1596
#7 0x00000000004aee7e in run_builtin (p=0xf64ca0 <commands+288>, argc=3, argv=0x7fffffffe470) at perf.c:330
#8 0x00000000004af0f2 in handle_internal_command (argc=3, argv=0x7fffffffe470) at perf.c:384
#9 0x00000000004af241 in run_argv (argcp=0x7fffffffe29c, argv=0x7fffffffe290) at perf.c:428
#10 0x00000000004af5fc in main (argc=3, argv=0x7fffffffe470) at perf.c:562
(gdb)
So check if we have tracepoint events in add_dynamic_entry() and bail
out instead:
# perf report --stdio -f
This perf binary isn't linked with libtraceevent, can't process probe_perf:lzma_decompress_to_file
Error:
Unknown --sort key: `trace'
#
Fixes: 378ef0f5d9d7f465 ("perf build: Use libtraceevent from the system")
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/Y7MDb7kRaHZB6APC@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This explodes the build if HEAD is signed, since the generated version
is gpg: Signature made Mon 26 Dec 2022 20:34:48 CET, then a few more
lines, then the SHA.
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/7c9637711271f50ec2341fb8a7c29585335dab04.1672174189.git.nabijaczleweli@nabijaczleweli.xyz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Commands such as kmem, kwork, lock, sched, trace and timechart depend on
libtraceevent, these commands need to be isolated using HAVE_LIBTRACEEVENT
macro when cmdlist generation.
The output of the generate-cmdlist.sh script is as follows:
# ./util/generate-cmdlist.sh
/* Automatically generated by ./util/generate-cmdlist.sh */
struct cmdname_help
{
char name[16];
char help[80];
};
static struct cmdname_help common_cmds[] = {
{"annotate", "Read perf.data (created by perf record) and display annotated code"},
{"archive", "Create archive with object files with build-ids found in perf.data file"},
{"bench", "General framework for benchmark suites"},
{"buildid-cache", "Manage build-id cache."},
{"buildid-list", "List the buildids in a perf.data file"},
{"c2c", "Shared Data C2C/HITM Analyzer."},
{"config", "Get and set variables in a configuration file."},
{"daemon", "Run record sessions on background"},
{"data", "Data file related processing"},
{"diff", "Read perf.data files and display the differential profile"},
{"evlist", "List the event names in a perf.data file"},
{"ftrace", "simple wrapper for kernel's ftrace functionality"},
{"inject", "Filter to augment the events stream with additional information"},
{"iostat", "Show I/O performance metrics"},
{"kallsyms", "Searches running kernel for symbols"},
{"kvm", "Tool to trace/measure kvm guest os"},
{"list", "List all symbolic event types"},
{"mem", "Profile memory accesses"},
{"record", "Run a command and record its profile into perf.data"},
{"report", "Read perf.data (created by perf record) and display the profile"},
{"script", "Read perf.data (created by perf record) and display trace output"},
{"stat", "Run a command and gather performance counter statistics"},
{"test", "Runs sanity tests."},
{"top", "System profiling tool."},
{"version", "display the version of perf binary"},
#ifdef HAVE_LIBELF_SUPPORT
{"probe", "Define new dynamic tracepoints"},
#endif /* HAVE_LIBELF_SUPPORT */
#if defined(HAVE_LIBTRACEEVENT) && (defined(HAVE_LIBAUDIT_SUPPORT) || defined(HAVE_SYSCALL_TABLE_SUPPORT))
{"trace", "strace inspired tool"},
#endif /* HAVE_LIBTRACEEVENT && (HAVE_LIBAUDIT_SUPPORT || HAVE_SYSCALL_TABLE_SUPPORT) */
#ifdef HAVE_LIBTRACEEVENT
{"kmem", "Tool to trace/measure kernel memory properties"},
{"kwork", "Tool to trace/measure kernel work properties (latencies)"},
{"lock", "Analyze lock events"},
{"sched", "Tool to trace/measure scheduler properties (latencies)"},
{"timechart", "Tool to visualize total system behavior during a workload"},
#endif /* HAVE_LIBTRACEEVENT */
};
Fixes: 378ef0f5d9d7f465 ("perf build: Use libtraceevent from the system")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221226085703.95081-1-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
perf_sample'
Since the definition of 'struct perf_sample' has been moved to sample.h,
we need to include this header file to fix the build error as follows:
arch/riscv/util/unwind-libdw.c: In function 'libdw__arch_set_initial_registers':
arch/riscv/util/unwind-libdw.c:12:50: error: invalid use of undefined type 'struct perf_sample'
12 | struct regs_dump *user_regs = &ui->sample->user_regs;
| ^~
Fixes: 9823147da6c893d9 ("perf tools: Move 'struct perf_sample' to a separate header file to disentangle headers")
Signed-off-by: Eric Lin <eric.lin@sifive.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: greentime.hu@sifive.com
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: linux-riscv@lists.infradead.org
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vincent Chen <vincent.chen@sifive.com>
Link: https://lore.kernel.org/r/20221231052731.24908-1-eric.lin@sifive.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In perf_data__open_dir(), opendir() opens the directory stream. Add
missing closedir() to release it after use.
Fixes: eb6176709b235b96 ("perf data: Add perf_data__open_dir_data function")
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221229090903.1402395-1-linmq006@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
arp_ndisc_evict_nocarrier
Return non-zero return value if there is any failure reported in this
script during the test. Otherwise it can only reflect the status of
the last command.
Fixes: f86ca07eb531 ("selftests: net: add arp_ndisc_evict_nocarrier")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The cleanup_v6() will cause the arp_ndisc_evict_nocarrier script exit
with 255 (No such file or directory), even the tests are good:
# selftests: net: arp_ndisc_evict_nocarrier.sh
# run arp_evict_nocarrier=1 test
# RTNETLINK answers: File exists
# ok
# run arp_evict_nocarrier=0 test
# RTNETLINK answers: File exists
# ok
# run all.arp_evict_nocarrier=0 test
# RTNETLINK answers: File exists
# ok
# run ndisc_evict_nocarrier=1 test
# ok
# run ndisc_evict_nocarrier=0 test
# ok
# run all.ndisc_evict_nocarrier=0 test
# ok
not ok 1 selftests: net: arp_ndisc_evict_nocarrier.sh # exit=255
This is because it's trying to modify the parameter for ipv4 instead.
Also, tests for ipv6 (run_ndisc_evict_nocarrier_enabled() and
run_ndisc_evict_nocarrier_disabled() are working on veth1, reflect
this fact in cleanup_v6().
Fixes: f86ca07eb531 ("selftests: net: add arp_ndisc_evict_nocarrier")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This cmsg_so_mark.sh test will hang on non-amd64 systems because of the
infinity loop for argument parsing in cmsg_sender.
Variable "o" in cs_parse_args() for taking getopt() should be an int,
otherwise it will be 255 when getopt() returns -1 on non-amd64 system
and thus causing infinity loop.
Link: https://lore.kernel.org/lkml/CA+G9fYsM2k7mrF7W4V_TrZ-qDauWM394=8yEJ=-t1oUg8_40YA@mail.gmail.com/t/
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
bhash2 split the bind() validation logic into wildcard and non-wildcard
cases. Let's add a test to catch future regression.
Before the previous patch:
# ./bind_timewait
TAP version 13
1..2
# Starting 2 tests from 3 test cases.
# RUN bind_timewait.localhost.1 ...
# bind_timewait.c:87:1:Expected ret (0) == -1 (-1)
# 1: Test terminated by assertion
# FAIL bind_timewait.localhost.1
not ok 1 bind_timewait.localhost.1
# RUN bind_timewait.addrany.1 ...
# OK bind_timewait.addrany.1
ok 2 bind_timewait.addrany.1
# FAILED: 1 / 2 tests passed.
# Totals: pass:1 fail:1 xfail:0 xpass:0 skip:0 error:0
After:
# ./bind_timewait
TAP version 13
1..2
# Starting 2 tests from 3 test cases.
# RUN bind_timewait.localhost.1 ...
# OK bind_timewait.localhost.1
ok 1 bind_timewait.localhost.1
# RUN bind_timewait.addrany.1 ...
# OK bind_timewait.addrany.1
ok 2 bind_timewait.addrany.1
# PASSED: 2 / 2 tests passed.
# Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a task iterator traverses vma(s), it is possible task->mm might
become invalid in the middle of traversal and this may cause kernel
misbehave (e.g., crash)
This test case creates iterators repeatedly and forks short-lived
processes in the background to detect this bug. The test will last
for 3 seconds to get the chance to trigger the issue.
Signed-off-by: Kui-Feng Lee <kuifeng@meta.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221216221855.4122288-3-kuifeng@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Commit 7443b296e699 ("x86/percpu: Move cpu_number next to current_task")
moved global per_cpu variable 'cpu_number' into pcpu_hot structure.
Therefore this part of var_data test is no longer valid.
Disable it until better solution is found.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
x86:
* several fixes to nested VMX execution controls
* fixes and clarification to the documentation for Xen emulation
* do not unnecessarily release a pmu event with zero period
* MMU fixes
* fix Coverity warning in kvm_hv_flush_tlb()
selftests:
* fixes for the ucall mechanism in selftests
* other fixes mostly related to compilation with clang
|
|
Commit 8fda37cf3d41 ("KVM: selftests: Stuff RAX/RCX with 'safe' values
in vmmcall()/vmcall()", 2022-11-21) broke the svm_nested_soft_inject_test
because it placed a "pop rbp" instruction after vmmcall. While this is
correct and mimics what is done in the VMX case, this particular test
expects a ud2 instruction right after the vmmcall, so that it can skip
over it in the L1 part of the test.
Inline a suitably-modified version of vmmcall() to restore the
functionality of the test.
Fixes: 8fda37cf3d41 ("KVM: selftests: Stuff RAX/RCX with 'safe' values in vmmcall()/vmcall()"
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20221130181147.9911-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
While KVM_XEN_EVTCHN_RESET is usually called with no vCPUs running,
if that happened it could cause a deadlock. This is due to
kvm_xen_eventfd_reset() doing a synchronize_srcu() inside
a kvm->lock critical section.
To avoid this, first collect all the evtchnfd objects in an
array and free all of them once the kvm->lock critical section
is over and th SRCU grace period has expired.
Reported-by: Michal Luczaj <mhal@rbox.co>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This gets rid of the last references to smp_read_barrier_depends()
which for the kernel side was removed in v5.9. The serialization
required for Alpha is done inside READ_ONCE() instead of having
users deal with it. Simply use a full barrier, the architecture
does not have rmb in the first place.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Message-Id: <20221128034347.990-3-dave@stgolabs.net>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
|
|
__read_once_size() is not a macro, remove those '/'s.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Message-Id: <20221128034347.990-2-dave@stgolabs.net>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
|
|
Replace "unsigned" with "unsigned int"
Signed-off-by: wangjianli <wangjianli@cdjrlc.com>
Message-Id: <20221113070742.48271-1-wangjianli@cdjrlc.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Unneeded semicolon after curly braces, so delete it.
Signed-off-by: Shaomin Deng <dengshaomin@cdjrlc.com>
Message-Id: <20221105155151.12155-1-dengshaomin@cdjrlc.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The virtio_device vqs_list spinlocks must be initialized before use to
prevent functions that manipulate the device virtualqueues, such as
vring_new_virtqueue(), from blocking indefinitely.
Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Message-Id: <20221012062949.1526176-1-ricardo.canuelo@collabora.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
|
|
The loop marks vaddr as mapped after incrementing it by page size,
thereby marking the *next* page as mapped. Set the bit in vpages_mapped
first instead.
Fixes: 56fc7732031d ("KVM: selftests: Fill in vm->vpages_mapped bitmap in virt_map() too")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Message-Id: <20221209015307.1781352-4-oliver.upton@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Currently the ucall MMIO hole is placed immediately after slot0, which
is a relatively safe address in the PA space. However, it is possible
that the same address has already been used for something else (like the
guest program image) in the VA space. At least in my own testing,
building the vgic_irq test with clang leads to the MMIO hole appearing
underneath gicv3_ops.
Stop identity mapping the MMIO hole and instead find an unused VA to map
to it. Yet another subtle detail of the KVM selftests library is that
virt_pg_map() does not update vm->vpages_mapped. Switch over to
virt_map() instead to guarantee that the chosen VA isn't to something
else.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Message-Id: <20221209015307.1781352-6-oliver.upton@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Explain the meaning of the bit manipulations of vm_vaddr_populate_bitmap.
These correspond to the "canonical addresses" of x86 and other
architectures, but that is not obvious.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Use a magic value to signal a ucall_alloc() failure instead of simply
doing GUEST_ASSERT(). GUEST_ASSERT() relies on ucall_alloc() and so a
failure puts the guest into an infinite loop.
Use -1 as the magic value, as a real ucall struct should never wrap.
Reported-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Disable gnu-variable-sized-type-not-at-end so that tests and libraries
can create overlays of variable sized arrays at the end of structs when
using a fixed number of entries, e.g. to get/set a single MSR.
It's possible to fudge around the warning, e.g. by defining a custom
struct that hardcodes the number of entries, but that is a burden for
both developers and readers of the code.
lib/x86_64/processor.c:664:19: warning: field 'header' with variable sized type 'struct kvm_msrs'
not at the end of a struct or class is a GNU extension [-Wgnu-variable-sized-type-not-at-end]
struct kvm_msrs header;
^
lib/x86_64/processor.c:772:19: warning: field 'header' with variable sized type 'struct kvm_msrs'
not at the end of a struct or class is a GNU extension [-Wgnu-variable-sized-type-not-at-end]
struct kvm_msrs header;
^
lib/x86_64/processor.c:787:19: warning: field 'header' with variable sized type 'struct kvm_msrs'
not at the end of a struct or class is a GNU extension [-Wgnu-variable-sized-type-not-at-end]
struct kvm_msrs header;
^
3 warnings generated.
x86_64/hyperv_tlb_flush.c:54:18: warning: field 'hv_vp_set' with variable sized type 'struct hv_vpset'
not at the end of a struct or class is a GNU extension [-Wgnu-variable-sized-type-not-at-end]
struct hv_vpset hv_vp_set;
^
1 warning generated.
x86_64/xen_shinfo_test.c:137:25: warning: field 'info' with variable sized type 'struct kvm_irq_routing'
not at the end of a struct or class is a GNU extension [-Wgnu-variable-sized-type-not-at-end]
struct kvm_irq_routing info;
^
1 warning generated.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221213001653.3852042-12-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Include lib.mk before consuming $(CC) and document that lib.mk overwrites
$(CC) unless make was invoked with -e or $(CC) was specified after make
(which makes the environment override the Makefile). Including lib.mk
after using it for probing, e.g. for -no-pie, can lead to weirdness.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221213001653.3852042-11-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Explicitly disable the compiler's builtin memcmp(), memcpy(), and
memset(). Because only lib/string_override.c is built with -ffreestanding,
the compiler reserves the right to do what it wants and can try to link the
non-freestanding code to its own crud.
/usr/bin/x86_64-linux-gnu-ld: /lib/x86_64-linux-gnu/libc.a(memcmp.o): in function `memcmp_ifunc':
(.text+0x0): multiple definition of `memcmp'; tools/testing/selftests/kvm/lib/string_override.o:
tools/testing/selftests/kvm/lib/string_override.c:15: first defined here
clang: error: linker command failed with exit code 1 (use -v to see invocation)
Fixes: 6b6f71484bf4 ("KVM: selftests: Implement memcmp(), memcpy(), and memset() for guest use")
Reported-by: Aaron Lewis <aaronlewis@google.com>
Reported-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221213001653.3852042-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Probe -no-pie with the actual set of CFLAGS used to compile the tests,
clang whines about -no-pie being unused if the tests are compiled with
-static.
clang: warning: argument unused during compilation: '-no-pie'
[-Wunused-command-line-argument]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221213001653.3852042-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Make the main() functions in the probing code proper prototypes so that
compiling the probing code with more strict flags won't generate false
negatives.
<stdin>:1:5: error: function declaration isn’t a prototype [-Werror=strict-prototypes]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221213001653.3852042-8-seanjc@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Rename UNAME_M to ARCH_DIR and explicitly set it directly for x86. At
this point, the name of the arch directory really doesn't have anything
to do with `uname -m`, and UNAME_M is unnecessarily confusing given that
its purpose is purely to identify the arch specific directory.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221213001653.3852042-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Fix a == vs. = typo in kvm_get_cpu_address_width() that results in
@pa_bits being left unset if the CPU doesn't support enumerating its
MAX_PHY_ADDR. Flagged by clang's unusued-value warning.
lib/x86_64/processor.c:1034:51: warning: expression result unused [-Wunused-value]
*pa_bits == kvm_cpu_has(X86_FEATURE_PAE) ? 36 : 32;
Fixes: 3bd396353d18 ("KVM: selftests: Add X86_FEATURE_PAE and use it calc "fallback" MAXPHYADDR")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221213001653.3852042-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Use pattern matching to exclude everything except .c, .h, .S, and .sh
files from Git. Manually adding every test target has an absurd
maintenance cost, is comically error prone, and leads to bikeshedding
over whether or not the targets should be listed in alphabetical order.
Deliberately do not include the one-off assets, e.g. config, settings,
.gitignore itself, etc as Git doesn't ignore files that are already in
the repository. Adding the one-off assets won't prevent mistakes where
developers forget to --force add files that don't match the "allowed".
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221213001653.3852042-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Check that the number of pages per slot is non-zero in get_max_slots()
prior to computing the remaining number of pages. clang generates code
that uses an actual DIV for calculating the remaining, which causes a #DE
if the total number of pages is less than the number of slots.
traps: memslot_perf_te[97611] trap divide error ip:4030c4 sp:7ffd18ae58f0
error:0 in memslot_perf_test[401000+cb000]
Fixes: a69170c65acd ("KVM: selftests: memslot_perf_test: Report optimal memory slots")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221213001653.3852042-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Delete an unused struct definition in x86_64/vmx_tsc_adjust_test.c.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221213001653.3852042-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Define a literal '0' asm input constraint to aarch64/page_fault_test's
guest_cas() as an unsigned long to make clang happy.
tools/testing/selftests/kvm/aarch64/page_fault_test.c:120:16: error:
value size does not match register size specified by the constraint
and modifier [-Werror,-Wasm-operand-widths]
:: "r" (0), "r" (TEST_DATA), "r" (guest_test_memory));
^
tools/testing/selftests/kvm/aarch64/page_fault_test.c:119:15: note:
use constraint modifier "w"
"casal %0, %1, [%2]\n"
^~
%w0
Fixes: 35c581015712 ("KVM: selftests: aarch64: Add aarch64/page_fault_test")
Cc: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221213001653.3852042-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Daniel Borkmann says:
====================
The following pull-request contains BPF updates for your *net* tree.
We've added 7 non-merge commits during the last 5 day(s) which contain
a total of 11 files changed, 231 insertions(+), 3 deletions(-).
The main changes are:
1) Fix a splat in bpf_skb_generic_pop() under CHECKSUM_PARTIAL due to
misuse of skb_postpull_rcsum(), from Jakub Kicinski with test case
from Martin Lau.
2) Fix BPF verifier's nullness propagation when registers are of
type PTR_TO_BTF_ID, from Hao Sun.
3) Fix bpftool build for JIT disassembler under statically built
libllvm, from Anton Protopopov.
4) Fix warnings reported by resolve_btfids when building vmlinux
with CONFIG_SECURITY_NETWORK disabled, from Hou Tao.
5) Minor fix up for BPF selftest gitignore, from Stanislav Fomichev.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Shows up when cross-compiling:
HOST_SCRATCH_DIR := $(OUTPUT)/host-tools
vs
SCRATCH_DIR := $(OUTPUT)/tools
HOST_SCRATCH_DIR := $(SCRATCH_DIR)
Reported-by: John Sperbeck <jsperbeck@google.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221222213958.2302320-1-sdf@google.com
|
|
Zero out the valid_bank_mask when using the fast variant of
HVCALL_SEND_IPI_EX to send IPIs to all vCPUs. KVM requires the "var_cnt"
and "valid_bank_mask" inputs to be consistent even when targeting all
vCPUs. See commit bd1ba5732bb9 ("KVM: x86: Get the number of Hyper-V
sparse banks from the VARHEAD field").
Fixes: 998489245d84 ("KVM: selftests: Hyper-V PV IPI selftest")
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221219220416.395329-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Verify that nullness information is not porpagated in the branches
of register to register JEQ and JNE operations if one of them is
PTR_TO_BTF_ID. Implement this in C level so we can use CO-RE.
Signed-off-by: Hao Sun <sunhao.th@gmail.com>
Suggested-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20221222024414.29539-2-sunhao.th@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Since the commit eb9d1acf634b ("bpftool: Add LLVM as default library for
disassembling JIT-ed programs") we might link the bpftool program with the
libllvm library. This works fine when a shared libllvm library is available,
but fails if we want to link bpftool with a statically built LLVM:
[...]
/usr/bin/ld: /usr/local/lib/libLLVMSupport.a(CrashRecoveryContext.cpp.o): in function `llvm::CrashRecoveryContextCleanup::~CrashRecoveryContextCleanup()':
CrashRecoveryContext.cpp:(.text._ZN4llvm27CrashRecoveryContextCleanupD0Ev+0x17): undefined reference to `operator delete(void*, unsigned long)'
/usr/bin/ld: /usr/local/lib/libLLVMSupport.a(CrashRecoveryContext.cpp.o): in function `llvm::CrashRecoveryContext::~CrashRecoveryContext()':
CrashRecoveryContext.cpp:(.text._ZN4llvm20CrashRecoveryContextD2Ev+0xc8): undefined reference to `operator delete(void*, unsigned long)'
[...]
So in the case of static libllvm we need to explicitly link bpftool with
required libraries, namely, libstdc++ and those provided by the `llvm-config
--system-libs` command. We can distinguish between the shared and static cases
by using the `llvm-config --shared-mode` command.
Fixes: eb9d1acf634b ("bpftool: Add LLVM as default library for disassembling JIT-ed programs")
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20221222102627.1643709-1-aspsk@isovalent.com
|
