summaryrefslogtreecommitdiffstats
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2019-11-29perf jit: Move test functionality in to a testIan Rogers5-46/+57
Adds a test for minimal jit_write_elf functionality. Committer testing: # perf test jit 61: Test jit_write_elf : Ok # # perf test -v jit 61: Test jit_write_elf : --- start --- test child forked, pid 10460 Writing jit code to: /tmp/perf-test-KqxURR test child finished with 0 ---- end ---- Test jit_write_elf: Ok # Committer notes: Fix up the case where HAVE_JITDUMP is no defined. Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexios Zavras <alexios.zavras@intel.com> Cc: Allison Randal <allison@lohutok.net> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lore.kernel.org/lkml/20191126235913.41855-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-29perf stat: Use affinity for enabling/disabling eventsAndi Kleen1-3/+37
Restructure event enabling/disabling to use affinity, which minimizes the number of IPIs needed. Before on a large test case with 94 CPUs: % time seconds usecs/call calls errors syscall ------ ----------- ----------- --------- --------- ---------------- 54.65 1.899986 22 84812 660 ioctl after: 39.21 0.930451 10 84796 644 ioctl Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lore.kernel.org/lkml/20191121001522.180827-13-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-29perf evsel: Add functions to enable/disable for a specific CPUAndi Kleen4-14/+52
Refactor the existing functions to use these functions internally. Used in the next patch. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lore.kernel.org/lkml/20191121001522.180827-12-andi@firstfloor.org Link: http://lore.kernel.org/lkml/20191127232657.GL84886@tassilo.jf.intel.com # Fix Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-29perf stat: Use affinity for readingAndi Kleen2-41/+57
Restructure event reading to use affinity to minimize the number of IPIs needed. Before on a large test case with 94 CPUs: % time seconds usecs/call calls errors syscall ------ ----------- ----------- --------- --------- ---------------- 3.16 0.106079 4 22082 read After: 3.43 0.081295 3 22082 read Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lore.kernel.org/lkml/20191121001522.180827-11-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-29perf stat: Use affinity for opening eventsAndi Kleen9-34/+141
Restructure the event opening in perf stat to cycle through the events by CPU after setting affinity to that CPU. This eliminates IPI overhead in the perf API. We have to loop through the CPU in the outter builtin-stat code instead of leaving that to low level functions. It has to change the weak group fallback strategy slightly. Since we cannot easily undo the opens for other CPUs move the weak group retry to a separate loop. Before with a large test case with 94 CPUs: % time seconds usecs/call calls errors syscall ------ ----------- ----------- --------- --------- ---------------- 42.75 4.050910 67 60046 110 perf_event_open After: 26.86 0.944396 16 58069 110 perf_event_open (the number changes slightly because the weak group retries work differently and the test case relies on weak groups) Committer notes: Added one of the hunks in a patch provided by Andi after I noticed that the "event times" 'perf test' entry was segfaulting. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lore.kernel.org/lkml/20191121001522.180827-10-andi@firstfloor.org Link: http://lore.kernel.org/lkml/20191127232657.GL84886@tassilo.jf.intel.com # Fix Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-29perf stat: Factor out open error handlingAndi Kleen1-40/+60
Factor out the open error handling into a separate function. This is useful for followon patches who need to duplicate this. No behavior change intended. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lore.kernel.org/lkml/20191121001522.180827-9-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-29perf stat: Use affinity for closing file descriptorsAndi Kleen1-2/+29
Closing a perf fd can also trigger an IPI to the target CPU. Use the same affinity technique as we use for reading/enabling events to closing to optimize the CPU transitions. Before on a large test case with 94 CPUs: % time seconds usecs/call calls errors syscall ------ ----------- ----------- --------- --------- ---------------- 32.56 3.085463 50 61483 close After: 10.54 0.735704 11 61485 close Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lore.kernel.org/lkml/20191121001522.180827-8-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-29perf evsel: Add functions to close evsel on a CPUAndi Kleen2-6/+22
Refactor the existing all CPU function to use the per CPU close internally. Export APIs to close per CPU. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lore.kernel.org/lkml/20191121001522.180827-7-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-29perf evsel: Add iterator to iterate over events ordered by CPUAndi Kleen4-0/+42
Add some common code that is needed to iterate over all events in CPU order. Used in followon patches Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lore.kernel.org/lkml/20191121001522.180827-6-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-29perf evlist: Maintain evlist->all_cpusAndi Kleen7-0/+83
Maintain a cpumap in the evlist that is the union of all the cpus of the events. This needs a cpumap merge operation, which is added together with tests. v2: Add tests for cpu map merge Fix handling of duplicates Rename _update to _merge Factor out sorting. Fix handling of NULL maps in merge v3: Add comments and empty lines to _merge Committer testing: # perf test "Merge cpu map" 52: Merge cpu map : Ok # Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Link: http://lore.kernel.org/lkml/20191121001522.180827-5-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-29perf cpumap: Maintain cpumaps ordered and without dupsAndi Kleen1-1/+15
Enforce this in _trim() Needed for followon change. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lore.kernel.org/lkml/20191121001522.180827-4-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-28selftests: bpf: correct perror stringsJakub Kicinski2-20/+20
perror(str) is basically equivalent to print("%s: %s\n", str, strerror(errno)). New line or colon at the end of str is a mistake/breaks formatting. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-28selftests: bpf: test_sockmap: handle file creation failures gracefullyJakub Kicinski1-0/+9
test_sockmap creates a temporary file to use for sendpage. this may fail for various reasons. Handle the error rather than segfault. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-28selftests/tls: add a test for fragmented messagesJakub Kicinski1-0/+60
Add a sendmsg test with very fragmented messages. This should fill up sk_msg and test the boundary conditions. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-29Merge tag 'perf-core-for-mingo-5.5-20191128' of ↵Ingo Molnar65-606/+2198
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: perf script: Adrian Hunter: - Fix brstackinsn for AUXTRACE. - Fix invalid LBR/binary mismatch error. perf diff: Arnaldo Carvalho de Melo: - Use llabs() with 64-bit values, fixing the build in some 32-bit architectures. perf pmu: Andi Kleen: - Use file system cache to optimize sysfs access. x86: Adrian Hunter: - Add some more Intel instructions to the opcode map and to the perf test entry: gf2p8affineinvqb, gf2p8affineqb, gf2p8mulb, v4fmaddps, v4fmaddss, v4fnmaddps, v4fnmaddss, vaesdec, vaesdeclast, vaesenc, vaesenclast, vcvtne2ps2bf16, vcvtneps2bf16, vdpbf16ps, vgf2p8affineinvqb, vgf2p8affineqb, vgf2p8mulb, vp2intersectd, vp2intersectq, vp4dpwssd, vp4dpwssds, vpclmulqdq, vpcompressb, vpcompressw, vpdpbusd, vpdpbusds, vpdpwssd, vpdpwssds, vpexpandb, vpexpandw, vpopcntb, vpopcntd, vpopcntq, vpopcntw, vpshldd, vpshldq, vpshldvd, vpshldvq, vpshldvw, vpshldw, vpshrdd, vpshrdq, vpshrdvd, vpshrdvq, vpshrdvw, vpshrdw, vpshufbitqmb. perf affinity: Andi Kleen: - Add infrastructure to save/restore affinity perf maps: Arnaldo Carvalho de Melo: - Merge 'struct maps' with 'struct map_groups', as there is a 1x1 relationship, simplifying code overal. perf build: Jiri Olsa: - Allow to link with libbpf dynamicaly. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-28Revert "selftests: Fix O= and KBUILD_OUTPUT handling for relative paths"Shuah Khan1-3/+2
This reverts commit 303e6218ecec475d5bc3e5922dec770ee5baf107. This patch breaks several CI use-cases that run kselftest builds without using main Makefile. This fix depends on abs_objtree which is undefined when kselftest build is invoked on selftests Makefile without going through the main Makefile. Revert this for now as this patch impacts selftest runs. Fixes: 303e6218ecec ("selftests: Fix O= and KBUILD_OUTPUT handling for relative paths") Reported-by: Cristian Marussi <cristian.marussi@arm.com> Reported-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-11-28Merge branch 'remotes/lorenzo/pci/misc'Bjorn Helgaas1-0/+1
- Fix iproc-msi and mvebu __iomem annotations (Ben Dooks) - Make mvebu_pci_bridge_emul_ops static (Ben Dooks) - Add Marek Vasut and Yoshihiro Shimoda as R-Car maintainers (Simon Horman) - Fix pcitest.c fd leak (Hewenliang) * remotes/lorenzo/pci/misc: tools: PCI: Fix fd leakage MAINTAINERS: Add Marek and Shimoda-san as R-Car PCIE co-maintainers PCI: mvebu: mvebu_pcie_map_registers __iomem fix PCI: mvebu: Make mvebu_pci_bridge_emul_ops static PCI: iproc-msi: Fix __iomem annotation in decode_msi_hwirq()
2019-11-28perf script: Fix invalid LBR/binary mismatch errorAdrian Hunter1-1/+1
The 'len' returned by grab_bb() includes an extra MAXINSN bytes to allow for the last instruction, so the the final 'offs' will not be 'len'. Fix the error condition logic accordingly. Before: $ perf record -e '{intel_pt//,cpu/mem_inst_retired.all_loads,aux-sample-size=8192/pp}:u' grep -rqs jhgjhg /boot [ perf record: Woken up 19 times to write data ] [ perf record: Captured and wrote 2.274 MB perf.data ] $ perf script -F +brstackinsn --xed --itrace=i1usl100 | head grep 13759 [002] 8091.310257: 1862 instructions:uH: 5641d58069eb bmexec+0x86b (/bin/grep) bmexec+2485: 00005641d5806b35 jnz 0x5641d5806bd0 # MISPRED 00005641d5806bd0 movzxb (%r13,%rdx,1), %eax 00005641d5806bd6 add %rdi, %rax 00005641d5806bd9 movzxb -0x1(%rax), %edx 00005641d5806bdd cmp %rax, %r14 00005641d5806be0 jnb 0x5641d58069c0 # MISPRED mismatch of LBR data and executable 00005641d58069c0 movzxb (%r13,%rdx,1), %edi After: $ perf script -F +brstackinsn --xed --itrace=i1usl100 | head grep 13759 [002] 8091.310257: 1862 instructions:uH: 5641d58069eb bmexec+0x86b (/bin/grep) bmexec+2485: 00005641d5806b35 jnz 0x5641d5806bd0 # MISPRED 00005641d5806bd0 movzxb (%r13,%rdx,1), %eax 00005641d5806bd6 add %rdi, %rax 00005641d5806bd9 movzxb -0x1(%rax), %edx 00005641d5806bdd cmp %rax, %r14 00005641d5806be0 jnb 0x5641d58069c0 # MISPRED 00005641d58069c0 movzxb (%r13,%rdx,1), %edi 00005641d58069c6 add %rax, %rdi Fixes: e98df280bc2a ("perf script brstackinsn: Fix recovery from LBR/binary mismatch") Reported-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lore.kernel.org/lkml/20191127095631.15663-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-28perf script: Fix brstackinsn for AUXTRACEAdrian Hunter1-1/+1
brstackinsn must be allowed to be set by the user when AUX area data has been captured because, in that case, the branch stack might be synthesized on the fly. This fixes the following error: Before: $ perf record -e '{intel_pt//,cpu/mem_inst_retired.all_loads,aux-sample-size=8192/pp}:u' grep -rqs jhgjhg /boot [ perf record: Woken up 19 times to write data ] [ perf record: Captured and wrote 2.274 MB perf.data ] $ perf script -F +brstackinsn --xed --itrace=i1usl100 | head Display of branch stack assembler requested, but non all-branch filter set Hint: run 'perf record -b ...' After: $ perf record -e '{intel_pt//,cpu/mem_inst_retired.all_loads,aux-sample-size=8192/pp}:u' grep -rqs jhgjhg /boot [ perf record: Woken up 19 times to write data ] [ perf record: Captured and wrote 2.274 MB perf.data ] $ perf script -F +brstackinsn --xed --itrace=i1usl100 | head grep 13759 [002] 8091.310257: 1862 instructions:uH: 5641d58069eb bmexec+0x86b (/bin/grep) bmexec+2485: 00005641d5806b35 jnz 0x5641d5806bd0 # MISPRED 00005641d5806bd0 movzxb (%r13,%rdx,1), %eax 00005641d5806bd6 add %rdi, %rax 00005641d5806bd9 movzxb -0x1(%rax), %edx 00005641d5806bdd cmp %rax, %r14 00005641d5806be0 jnb 0x5641d58069c0 # MISPRED mismatch of LBR data and executable 00005641d58069c0 movzxb (%r13,%rdx,1), %edi Fixes: 48d02a1d5c13 ("perf script: Add 'brstackinsn' for branch stacks") Reported-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lore.kernel.org/lkml/20191127095322.15417-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-28perf affinity: Add infrastructure to save/restore affinityAndi Kleen4-0/+92
The kernel perf subsystem has to IPI to the target CPU for many operations. On systems with many CPUs and when managing many events the overhead can be dominated by lots of IPIs. An alternative is to set up CPU affinity in the perf tool, then set up all the events for that CPU, and then move on to the next CPU. Add some affinity management infrastructure to enable such a model. Used in followon patches. Committer notes: Use zfree() in some places, add missing stdbool.h header, some minor coding style changes. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lore.kernel.org/lkml/20191121001522.180827-3-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-28perf pmu: Use file system cache to optimize sysfs accessAndi Kleen5-31/+83
pmu.c does a lot of redundant /sys accesses while parsing aliases and probing for PMUs. On large systems with a lot of PMUs this can get expensive (>2s): % time seconds usecs/call calls errors syscall ------ ----------- ----------- --------- --------- ---------------- 27.25 1.227847 8 160888 16976 openat 26.42 1.190481 7 164224 164077 stat Add a cache to remember if specific file names exist or don't exist, which eliminates most of this overhead. Also optimize some stat() calls to be slightly cheaper access() Resulting in: 0.18 0.004166 2 1851 305 open 0.08 0.001970 2 829 622 access Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lore.kernel.org/lkml/20191121001522.180827-2-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-28perf regs: Make perf_reg_name() return "unknown" instead of NULLArnaldo Carvalho de Melo1-1/+1
To avoid breaking the build on arches where this is not wired up, at least all the other features should be made available and when using this specific routine, the "unknown" should point the user/developer to the need to wire this up on this particular hardware architecture. Detected in a container mipsel debian cross build environment, where it shows up as: In file included from /usr/mipsel-linux-gnu/include/stdio.h:867, from /git/linux/tools/perf/lib/include/perf/cpumap.h:6, from util/session.c:13: In function 'printf', inlined from 'regs_dump__printf' at util/session.c:1103:3, inlined from 'regs__printf' at util/session.c:1131:2: /usr/mipsel-linux-gnu/include/bits/stdio2.h:107:10: error: '%-5s' directive argument is null [-Werror=format-overflow=] 107 | return __printf_chk (__USE_FORTIFY_LEVEL - 1, __fmt, __va_arg_pack ()); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cross compiler details: mipsel-linux-gnu-gcc (Debian 9.2.1-8) 9.2.1 20190909 Also on mips64: In file included from /usr/mips64-linux-gnuabi64/include/stdio.h:867, from /git/linux/tools/perf/lib/include/perf/cpumap.h:6, from util/session.c:13: In function 'printf', inlined from 'regs_dump__printf' at util/session.c:1103:3, inlined from 'regs__printf' at util/session.c:1131:2, inlined from 'regs_user__printf' at util/session.c:1139:3, inlined from 'dump_sample' at util/session.c:1246:3, inlined from 'machines__deliver_event' at util/session.c:1421:3: /usr/mips64-linux-gnuabi64/include/bits/stdio2.h:107:10: error: '%-5s' directive argument is null [-Werror=format-overflow=] 107 | return __printf_chk (__USE_FORTIFY_LEVEL - 1, __fmt, __va_arg_pack ()); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In function 'printf', inlined from 'regs_dump__printf' at util/session.c:1103:3, inlined from 'regs__printf' at util/session.c:1131:2, inlined from 'regs_intr__printf' at util/session.c:1147:3, inlined from 'dump_sample' at util/session.c:1249:3, inlined from 'machines__deliver_event' at util/session.c:1421:3: /usr/mips64-linux-gnuabi64/include/bits/stdio2.h:107:10: error: '%-5s' directive argument is null [-Werror=format-overflow=] 107 | return __printf_chk (__USE_FORTIFY_LEVEL - 1, __fmt, __va_arg_pack ()); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cross compiler details: mips64-linux-gnuabi64-gcc (Debian 9.2.1-8) 9.2.1 20190909 Fixes: 2bcd355b71da ("perf tools: Add interface to arch registers sets") Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-95wjyv4o65nuaeweq31t7l1s@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-28perf diff: Use llabs() with 64-bit valuesArnaldo Carvalho de Melo1-1/+1
To fix this build error on a debian mipsel cross build environment: builtin-diff.c: In function 'compute_cycles_diff': builtin-diff.c:649:10: error: absolute value function 'labs' given an argument of type 's64' {aka 'long long int'} but has parameter of type 'long int' which may cause truncation of value [-Werror=absolute-value] 649 | val = labs(pair->block_info->cycles_spark[i] - | ^~~~ Fixes: cebf7d51a6c3 ("perf diff: Report noisy for cycles diff") Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-pn7szy5uw384ntjgk6zckh6a@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-28perf diff: Use llabs() with 64-bit valuesArnaldo Carvalho de Melo1-2/+2
To fix these build errors on a debian mipsel cross build environment: builtin-diff.c: In function 'block_cycles_diff_cmp': builtin-diff.c:550:6: error: absolute value function 'labs' given an argument of type 's64' {aka 'long long int'} but has parameter of type 'long int' which may cause truncation of value [-Werror=absolute-value] 550 | l = labs(left->diff.cycles); | ^~~~ builtin-diff.c:551:6: error: absolute value function 'labs' given an argument of type 's64' {aka 'long long int'} but has parameter of type 'long int' which may cause truncation of value [-Werror=absolute-value] 551 | r = labs(right->diff.cycles); | ^~~~ Fixes: 99150a1faab2 ("perf diff: Use hists to manage basic blocks per symbol") Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-pn7szy5uw384ntjgk6zckh6a@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-27libbpf: Fix sym->st_value print on 32-bit archesAlexei Starovoitov1-1/+1
The st_value field is a 64-bit value and causing this error on 32-bit arches: In file included from libbpf.c:52: libbpf.c: In function 'bpf_program__record_reloc': libbpf_internal.h:59:22: error: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'Elf64_Addr' {aka 'const long long unsigned int'} [-Werror=format=] Fix it with (__u64) cast. Fixes: 1f8e2bcb2cd5 ("libbpf: Refactor relocation handling") Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-11-27libbpf: Fix up generation of bpf_helper_defs.hArnaldo Carvalho de Melo2-2/+3
$ make -C tools/perf build-test does, ends up with these two problems: make[3]: *** No rule to make target '/tmp/tmp.zq13cHILGB/perf-5.3.0/include/uapi/linux/bpf.h', needed by 'bpf_helper_defs.h'. Stop. make[3]: *** Waiting for unfinished jobs.... make[2]: *** [Makefile.perf:757: /tmp/tmp.zq13cHILGB/perf-5.3.0/tools/lib/bpf/libbpf.a] Error 2 make[2]: *** Waiting for unfinished jobs.... Because $(srcdir) points to the /tmp/tmp.zq13cHILGB/perf-5.3.0 directory and we need '/tools/ after that variable, and after fixing this then we get to another problem: /bin/sh: /home/acme/git/perf/tools/scripts/bpf_helpers_doc.py: No such file or directory make[3]: *** [Makefile:184: bpf_helper_defs.h] Error 127 make[3]: *** Deleting file 'bpf_helper_defs.h' LD /tmp/build/perf/libapi-in.o make[2]: *** [Makefile.perf:778: /tmp/build/perf/libbpf.a] Error 2 make[2]: *** Waiting for unfinished jobs.... Because this requires something outside the tools/ directories that gets collected into perf's detached tarballs, to fix it just add it to tools/perf/MANIFEST, which this patch does, now it works for that case and also for all these other cases. Fixes: e01a75c15969 ("libbpf: Move bpf_{helpers, helper_defs, endian, tracing}.h into libbpf") Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrii Nakryiko <andriin@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-4pnkg2vmdvq5u6eivc887wen@git.kernel.org Link: https://lore.kernel.org/bpf/20191126151045.GB19483@kernel.org
2019-11-27libbpf: Fix global variable relocationAndrii Nakryiko5-41/+36
Similarly to a0d7da26ce86 ("libbpf: Fix call relocation offset calculation bug"), relocations against global variables need to take into account referenced symbol's st_value, which holds offset into a corresponding data section (and, subsequently, offset into internal backing map). For static variables this offset is always zero and data offset is completely described by respective instruction's imm field. Convert a bunch of selftests to global variables. Previously they were relying on `static volatile` trick to ensure Clang doesn't inline static variables, which with global variables is not necessary anymore. Fixes: 393cdfbee809 ("libbpf: Support initialized global variables") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20191127200651.1381348-1-andriin@fb.com
2019-11-27libbpf: Fix Makefile' libbpf symbol mismatch diagnosticAndrii Nakryiko1-1/+1
Fix Makefile's diagnostic diff output when there is LIBBPF_API-versioned symbols mismatch. Fixes: 1bd63524593b ("libbpf: handle symbol versioning properly for libbpf.a") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20191127200134.1360660-1-andriin@fb.com
2019-11-27Merge tag 'trace-v5.5' of ↵Linus Torvalds9-13/+249
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "New tracing features: - New PERMANENT flag to ftrace_ops when attaching a callback to a function. As /proc/sys/kernel/ftrace_enabled when set to zero will disable all attached callbacks in ftrace, this has a detrimental impact on live kernel tracing, as it disables all that it patched. If a ftrace_ops is registered to ftrace with the PERMANENT flag set, it will prevent ftrace_enabled from being disabled, and if ftrace_enabled is already disabled, it will prevent a ftrace_ops with PREMANENT flag set from being registered. - New register_ftrace_direct(). As eBPF would like to register its own trampolines to be called by the ftrace nop locations directly, without going through the ftrace trampoline, this function has been added. This allows for eBPF trampolines to live along side of ftrace, perf, kprobe and live patching. It also utilizes the ftrace enabled_functions file that keeps track of functions that have been modified in the kernel, to allow for security auditing. - Allow for kernel internal use of ftrace instances. Subsystems in the kernel can now create and destroy their own tracing instances which allows them to have their own tracing buffer, and be able to record events without worrying about other users from writing over their data. - New seq_buf_hex_dump() that lets users use the hex_dump() in their seq_buf usage. - Notifications now added to tracing_max_latency to allow user space to know when a new max latency is hit by one of the latency tracers. - Wider spread use of generic compare operations for use of bsearch and friends. - More synthetic event fields may be defined (32 up from 16) - Use of xarray for architectures with sparse system calls, for the system call trace events. This along with small clean ups and fixes" * tag 'trace-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (51 commits) tracing: Enable syscall optimization for MIPS tracing: Use xarray for syscall trace events tracing: Sample module to demonstrate kernel access to Ftrace instances. tracing: Adding new functions for kernel access to Ftrace instances tracing: Fix Kconfig indentation ring-buffer: Fix typos in function ring_buffer_producer ftrace: Use BIT() macro ftrace: Return ENOTSUPP when DYNAMIC_FTRACE_WITH_DIRECT_CALLS is not configured ftrace: Rename ftrace_graph_stub to ftrace_stub_graph ftrace: Add a helper function to modify_ftrace_direct() to allow arch optimization ftrace: Add helper find_direct_entry() to consolidate code ftrace: Add another check for match in register_ftrace_direct() ftrace: Fix accounting bug with direct->count in register_ftrace_direct() ftrace/selftests: Fix spelling mistake "wakeing" -> "waking" tracing: Increase SYNTH_FIELDS_MAX for synthetic_events ftrace/samples: Add a sample module that implements modify_ftrace_direct() ftrace: Add modify_ftrace_direct() tracing: Add missing "inline" in stub function of latency_fsnotify() tracing: Remove stray tab in TRACE_EVAL_MAP_FILE's help text tracing: Use seq_buf_hex_dump() to dump buffers ...
2019-11-27Merge tag 'riscv/for-v5.5-rc1' of ↵Linus Torvalds1-1/+7
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Paul Walmsley: "New features: - SECCOMP support - nommu support - SBI-less system support - M-Mode support - TLB flush optimizations Other improvements: - Pass the complete RISC-V ISA string supported by the CPU cores to userspace, rather than redacting parts of it in the kernel - Add platform DMA IP block data to the HiFive Unleashed board DT file - Add Makefile support for BZ2, LZ4, LZMA, LZO kernel image compression formats, in line with other architectures Cleanups: - Remove unnecessary PTE_PARENT_SIZE macro - Standardize include guard naming across arch/riscv" * tag 'riscv/for-v5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (22 commits) riscv: provide a flat image loader riscv: add nommu support riscv: clear the instruction cache and all registers when booting riscv: read the hart ID from mhartid on boot riscv: provide native clint access for M-mode riscv: dts: add support for PDMA device of HiFive Unleashed Rev A00 riscv: add support for MMIO access to the timer registers riscv: implement remote sfence.i using IPIs riscv: cleanup the default power off implementation riscv: poison SBI calls for M-mode riscv: don't allow selecting SBI based drivers for M-mode RISC-V: Add multiple compression image format. riscv: clean up the macro format in each header file riscv: Use PMD_SIZE to replace PTE_PARENT_SIZE riscv: abstract out CSR names for supervisor vs machine mode riscv: separate MMIO functions into their own header file riscv: enter WFI in default_power_off() if SBI does not shutdown RISC-V: Issue a tlb page flush if possible RISC-V: Issue a local tlbflush if possible. RISC-V: Do not invoke SBI call if cpumask is empty ...
2019-11-27Merge tag 'staging-5.5-rc1' of ↵Linus Torvalds2-3/+8
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging / iio updates from Greg KH: "Here is the big staging and iio set of patches for the 5.5-rc1 release. It's the usual huge collection of cleanup patches all over the drivers/staging/ area, along with a new staging driver, and a bunch of new IIO drivers as well. Full details are in the shortlog, but all of these have been in linux-next for a long time with no reported issues" * tag 'staging-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (548 commits) staging: vchiq: Have vchiq_dump_* functions return an error code staging: vchiq: Refactor indentation in vchiq_dump_* functions staging: fwserial: Fix Kconfig indentation (seven spaces) staging: vchiq_dump: Replace min with min_t staging: vchiq: Fix block comment format in vchiq_dump() staging: octeon: indent with tabs instead of spaces staging: comedi: usbduxfast: usbduxfast_ai_cmdtest rounding error staging: most: core: remove sysfs attr remove_link staging: vc04: Fix Kconfig indentation staging: pi433: Fix Kconfig indentation staging: nvec: Fix Kconfig indentation staging: most: Fix Kconfig indentation staging: fwserial: Fix Kconfig indentation staging: fbtft: Fix Kconfig indentation fbtft: Drop OF dependency fbtft: Make use of device property API fbtft: Drop useless #ifdef CONFIG_OF and dead code fbtft: Describe function parameters in kernel-doc fbtft: Make sure string is NULL terminated staging: rtl8723bs: remove set but not used variable 'change', 'pos' ...
2019-11-27Merge tag 'usb-5.5-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here is the big set of USB patches for 5.5-rc1 Lots of little things in here: - typec updates and additions - usb-serial drivers cleanups and fixes - misc USB drivers cleanups and fixes - gadget drivers new features and controllers added - usual xhci additions - other minor changes All of these have been in linux-next with no reported issues" * tag 'usb-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (223 commits) usb: gadget: udc: gr_udc: create debugfs directory under usb root usb: gadget: atmel: create debugfs directory under usb root usb: musb: create debugfs directory under usb root usb: serial: Fix Kconfig indentation usb: misc: Fix Kconfig indentation usb: gadget: Fix Kconfig indentation usb: host: Fix Kconfig indentation usb: dwc3: Fix Kconfig indentation usb: gadget: configfs: Fix missing spin_lock_init() usb-storage: Disable UAS on JMicron SATA enclosure USB: documentation: flags on usb-storage versus UAS USB: uas: heed CAPACITY_HEURISTICS USB: uas: honor flag to avoid CAPACITY16 usb: host: xhci-tegra: Correct phy enable sequence usb-serial: cp201x: support Mark-10 digital force gauge usb: chipidea: imx: pinctrl for HSIC is optional usb: chipidea: imx: refine the error handling for hsic usb: chipidea: imx: change hsic power regulator as optional usb: chipidea: imx: check data->usbmisc_data against NULL before access usb: chipidea: core: change vbus-regulator as optional ...
2019-11-26Merge tag 'pm-5.5-rc1' of ↵Linus Torvalds13-19/+100
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These include cpuidle changes to use nanoseconds (instead of microseconds) as the unit of time and to simplify checks for disabled idle states in the idle loop, some cpuidle fixes and governor updates, assorted cpufreq updates (driver updates mostly and a few core fixes and cleanups), devfreq updates (dominated by the tegra30 driver changes), new CPU IDs for the RAPL power capping driver, relatively minor updates of the generic power domains (genpd) and operation performance points (OPP) frameworks, and assorted fixes and cleanups. There are also two maintainer information updates: Chanwoo Choi will be maintaining the devfreq subsystem going forward and Todd Brandt is going to maintain the pm-graph utility (created by him). Specifics: - Use nanoseconds (instead of microseconds) as the unit of time in the cpuidle core and simplify checks for disabled idle states in the idle loop (Rafael Wysocki) - Fix and clean up the teo cpuidle governor (Rafael Wysocki) - Fix the cpuidle registration error code path (Zhenzhong Duan) - Avoid excessive vmexits in the ACPI cpuidle driver (Yin Fengwei) - Extend the idle injection infrastructure to be able to measure the requested duration in nanoseconds and to allow an exit latency limit for idle states to be specified (Daniel Lezcano) - Fix cpufreq driver registration and clarify a comment in the cpufreq core (Viresh Kumar) - Add NULL checks to the show() and store() methods of sysfs attributes exposed by cpufreq (Kai Shen) - Update cpufreq drivers: * Fix for a plain int as pointer warning from sparse in intel_pstate (Jamal Shareef) * Fix for a hardcoded number of CPUs and stack bloat in the powernv driver (John Hubbard) * Updates to the ti-cpufreq driver and DT files to support new platforms and migrate bindings from opp-v1 to opp-v2 (Adam Ford, H. Nikolaus Schaller) * Merging of the arm_big_little and vexpress-spc drivers and related cleanup (Sudeep Holla) * Fix for imx's default speed grade value (Anson Huang) * Minor cleanup of the s3c64xx driver (Nathan Chancellor) * CPU speed bin detection fix for sun50i (Ondrej Jirman) - Appoint Chanwoo Choi as the new devfreq maintainer. - Update the devfreq core: * Check NULL governor in available_governors_show sysfs to prevent showing wrong governor information and fix a race condition between devfreq_update_status() and trans_stat_show() (Leonard Crestez) * Add new 'interrupt-driven' flag for devfreq governors to allow interrupt-driven governors to prevent the devfreq core from polling devices for status (Dmitry Osipenko) * Improve an error message in devfreq_add_device() (Matthias Kaehlcke) - Update devfreq drivers: * tegra30 driver fixes and cleanups (Dmitry Osipenko) * Removal of unused property from dt-binding documentation for the exynos-bus driver (Kamil Konieczny) * exynos-ppmu cleanup and DT bindings update (Lukasz Luba, Marek Szyprowski) - Add new CPU IDs for CometLake Mobile and Desktop to the Intel RAPL power capping driver (Zhang Rui) - Allow device initialization in the generic power domains (genpd) framework to be more straightforward and clean it up (Ulf Hansson) - Add support for adjusting OPP voltages at run time to the OPP framework (Stephen Boyd) - Avoid freeing memory that has never been allocated in the hibernation core (Andy Whitcroft) - Clean up function headers in a header file and coding style in the wakeup IRQs handling code (Ulf Hansson, Xiaofei Tan) - Clean up the SmartReflex adaptive voltage scaling (AVS) driver for ARM (Ben Dooks, Geert Uytterhoeven) - Wrap power management documentation to fit in 80 columns (Bjorn Helgaas) - Add pm-graph utility entry to MAINTAINERS (Todd Brandt) - Update the cpupower utility: * Fix the handling of set and info subcommands (Abhishek Goel) * Fix build warnings (Nathan Chancellor) * Improve mperf_monitor handling (Janakarajan Natarajan)" * tag 'pm-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (83 commits) PM: Wrap documentation to fit in 80 columns cpuidle: Pass exit latency limit to cpuidle_use_deepest_state() cpuidle: Allow idle injection to apply exit latency limit cpuidle: Introduce cpuidle_driver_state_disabled() for driver quirks cpuidle: teo: Avoid code duplication in conditionals cpufreq: Register drivers only after CPU devices have been registered cpuidle: teo: Avoid using "early hits" incorrectly cpuidle: teo: Exclude cpuidle overhead from computations PM / Domains: Convert to dev_to_genpd_safe() in genpd_syscore_switch() mmc: tmio: Avoid boilerplate code in ->runtime_suspend() PM / Domains: Implement the ->start() callback for genpd PM / Domains: Introduce dev_pm_domain_start() ARM: OMAP2+: SmartReflex: add omap_sr_pdata definition PM / wakeirq: remove unnecessary parentheses power: avs: smartreflex: Remove superfluous cast in debugfs_create_file() call cpuidle: Use nanoseconds as the unit of time PM / OPP: Support adjusting OPP voltages at runtime PM / core: Clean up some function headers in power.h cpufreq: Add NULL checks to show() and store() methods of cpufreq cpufreq: intel_pstate: Fix plain int as pointer warning from sparse ...
2019-11-26Merge branch 'locking-core-for-linus' of ↵Linus Torvalds4-12/+11
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: "The main changes in this cycle were: - A comprehensive rewrite of the robust/PI futex code's exit handling to fix various exit races. (Thomas Gleixner et al) - Rework the generic REFCOUNT_FULL implementation using atomic_fetch_* operations so that the performance impact of the cmpxchg() loops is mitigated for common refcount operations. With these performance improvements the generic implementation of refcount_t should be good enough for everybody - and this got confirmed by performance testing, so remove ARCH_HAS_REFCOUNT and REFCOUNT_FULL entirely, leaving the generic implementation enabled unconditionally. (Will Deacon) - Other misc changes, fixes, cleanups" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits) lkdtm: Remove references to CONFIG_REFCOUNT_FULL locking/refcount: Remove unused 'refcount_error_report()' function locking/refcount: Consolidate implementations of refcount_t locking/refcount: Consolidate REFCOUNT_{MAX,SATURATED} definitions locking/refcount: Move saturation warnings out of line locking/refcount: Improve performance of generic REFCOUNT_FULL code locking/refcount: Move the bulk of the REFCOUNT_FULL implementation into the <linux/refcount.h> header locking/refcount: Remove unused refcount_*_checked() variants locking/refcount: Ensure integer operands are treated as signed locking/refcount: Define constants for saturation and max refcount values futex: Prevent exit livelock futex: Provide distinct return value when owner is exiting futex: Add mutex around futex exit futex: Provide state handling for exec() as well futex: Sanitize exit state handling futex: Mark the begin of futex exit explicitly futex: Set task::futex_state to DEAD right after handling futex exit futex: Split futex_mm_release() for exit/exec exit/exec: Seperate mm_release() futex: Replace PF_EXITPIDONE with a state ...
2019-11-26Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds10-50/+576
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU updates from Ingo Molnar: "The main changes in this cycle were: - Dynamic tick (nohz) updates, perhaps most notably changes to force the tick on when needed due to lengthy in-kernel execution on CPUs on which RCU is waiting. - Linux-kernel memory consistency model updates. - Replace rcu_swap_protected() with rcu_prepace_pointer(). - Torture-test updates. - Documentation updates. - Miscellaneous fixes" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits) security/safesetid: Replace rcu_swap_protected() with rcu_replace_pointer() net/sched: Replace rcu_swap_protected() with rcu_replace_pointer() net/netfilter: Replace rcu_swap_protected() with rcu_replace_pointer() net/core: Replace rcu_swap_protected() with rcu_replace_pointer() bpf/cgroup: Replace rcu_swap_protected() with rcu_replace_pointer() fs/afs: Replace rcu_swap_protected() with rcu_replace_pointer() drivers/scsi: Replace rcu_swap_protected() with rcu_replace_pointer() drm/i915: Replace rcu_swap_protected() with rcu_replace_pointer() x86/kvm/pmu: Replace rcu_swap_protected() with rcu_replace_pointer() rcu: Upgrade rcu_swap_protected() to rcu_replace_pointer() rcu: Suppress levelspread uninitialized messages rcu: Fix uninitialized variable in nocb_gp_wait() rcu: Update descriptions for rcu_future_grace_period tracepoint rcu: Update descriptions for rcu_nocb_wake tracepoint rcu: Remove obsolete descriptions for rcu_barrier tracepoint rcu: Ensure that ->rcu_urgent_qs is set before resched IPI workqueue: Convert for_each_wq to use built-in list check rcu: Several rcu_segcblist functions can be static rcu: Remove unused function hlist_bl_del_init_rcu() Documentation: Rename rcu_node_context_switch() to rcu_note_context_switch() ...
2019-11-26Merge branch 'perf-core-for-linus' of ↵Linus Torvalds266-23066/+31898
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "The main kernel side changes in this cycle were: - Various Intel-PT updates and optimizations (Alexander Shishkin) - Prohibit kprobes on Xen/KVM emulate prefixes (Masami Hiramatsu) - Add support for LSM and SELinux checks to control access to the perf syscall (Joel Fernandes) - Misc other changes, optimizations, fixes and cleanups - see the shortlog for details. There were numerous tooling changes as well - 254 non-merge commits. Here are the main changes - too many to list in detail: - Enhancements to core tooling infrastructure, perf.data, libperf, libtraceevent, event parsing, vendor events, Intel PT, callchains, BPF support and instruction decoding. - There were updates to the following tools: perf annotate perf diff perf inject perf kvm perf list perf maps perf parse perf probe perf record perf report perf script perf stat perf test perf trace - And a lot of other changes: please see the shortlog and Git log for more details" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (279 commits) perf parse: Fix potential memory leak when handling tracepoint errors perf probe: Fix spelling mistake "addrees" -> "address" libtraceevent: Fix memory leakage in copy_filter_type libtraceevent: Fix header installation perf intel-bts: Does not support AUX area sampling perf intel-pt: Add support for decoding AUX area samples perf intel-pt: Add support for recording AUX area samples perf pmu: When using default config, record which bits of config were changed by the user perf auxtrace: Add support for queuing AUX area samples perf session: Add facility to peek at all events perf auxtrace: Add support for dumping AUX area samples perf inject: Cut AUX area samples perf record: Add aux-sample-size config term perf record: Add support for AUX area sampling perf auxtrace: Add support for AUX area sample recording perf auxtrace: Move perf_evsel__find_pmu() perf record: Add a function to test for kernel support for AUX area sampling perf tools: Add kernel AUX area sampling definitions perf/core: Make the mlock accounting simple again perf report: Jump to symbol source view from total cycles view ...
2019-11-26selftests/x86/single_step_syscall: Check SYSENTER directlyAndy Lutomirski1-9/+85
We used to test SYSENTER only through the vDSO. Test it directly too, just in case. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-26Merge branch 'x86-iopl-for-linus' of ↵Linus Torvalds2-12/+133
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 iopl updates from Ingo Molnar: "This implements a nice simplification of the iopl and ioperm code that Thomas Gleixner discovered: we can implement the IO privilege features of the iopl system call by using the IO permission bitmap in permissive mode, while trapping CLI/STI/POPF/PUSHF uses in user-space if they change the interrupt flag. This implements that feature, with testing facilities and related cleanups" [ "Simplification" may be an over-statement. The main goal is to avoid the cli/sti of iopl by effectively implementing the IO port access parts of iopl in terms of ioperm. This may end up not workign well in case people actually depend on cli/sti being available, or if there are mixed uses of iopl and ioperm. We will see.. - Linus ] * 'x86-iopl-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits) x86/ioperm: Fix use of deprecated config option x86/entry/32: Clarify register saving in __switch_to_asm() selftests/x86/iopl: Extend test to cover IOPL emulation x86/ioperm: Extend IOPL config to control ioperm() as well x86/iopl: Remove legacy IOPL option x86/iopl: Restrict iopl() permission scope x86/iopl: Fixup misleading comment selftests/x86/ioperm: Extend testing so the shared bitmap is exercised x86/ioperm: Share I/O bitmap if identical x86/ioperm: Remove bitmap if all permissions dropped x86/ioperm: Move TSS bitmap update to exit to user work x86/ioperm: Add bitmap sequence number x86/ioperm: Move iobitmap data into a struct x86/tss: Move I/O bitmap data into a seperate struct x86/io: Speedup schedule out of I/O bitmap user x86/ioperm: Avoid bitmap allocation if no permissions are set x86/ioperm: Simplify first ioperm() invocation logic x86/iopl: Cleanup include maze x86/tss: Fix and move VMX BUILD_BUG_ON() x86/cpu: Unify cpu_init() ...
2019-11-26Merge branch 'x86-asm-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 asm updates from Ingo Molnar: "The main changes in this cycle were: - Cross-arch changes to move the linker sections for NOTES and EXCEPTION_TABLE into the RO_DATA area, where they belong on most architectures. (Kees Cook) - Switch the x86 linker fill byte from x90 (NOP) to 0xcc (INT3), to trap jumps into the middle of those padding areas instead of sliding execution. (Kees Cook) - A thorough cleanup of symbol definitions within x86 assembler code. The rather randomly named macros got streamlined around a (hopefully) straightforward naming scheme: SYM_START(name, linkage, align...) SYM_END(name, sym_type) SYM_FUNC_START(name) SYM_FUNC_END(name) SYM_CODE_START(name) SYM_CODE_END(name) SYM_DATA_START(name) SYM_DATA_END(name) etc - with about three times of these basic primitives with some label, local symbol or attribute variant, expressed via postfixes. No change in functionality intended. (Jiri Slaby) - Misc other changes, cleanups and smaller fixes" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (67 commits) x86/entry/64: Remove pointless jump in paranoid_exit x86/entry/32: Remove unused resume_userspace label x86/build/vdso: Remove meaningless CFLAGS_REMOVE_*.o m68k: Convert missed RODATA to RO_DATA x86/vmlinux: Use INT3 instead of NOP for linker fill bytes x86/mm: Report actual image regions in /proc/iomem x86/mm: Report which part of kernel image is freed x86/mm: Remove redundant address-of operators on addresses xtensa: Move EXCEPTION_TABLE to RO_DATA segment powerpc: Move EXCEPTION_TABLE to RO_DATA segment parisc: Move EXCEPTION_TABLE to RO_DATA segment microblaze: Move EXCEPTION_TABLE to RO_DATA segment ia64: Move EXCEPTION_TABLE to RO_DATA segment h8300: Move EXCEPTION_TABLE to RO_DATA segment c6x: Move EXCEPTION_TABLE to RO_DATA segment arm64: Move EXCEPTION_TABLE to RO_DATA segment alpha: Move EXCEPTION_TABLE to RO_DATA segment x86/vmlinux: Move EXCEPTION_TABLE to RO_DATA segment x86/vmlinux: Actually use _etext for the end of the text segment vmlinux.lds.h: Allow EXCEPTION_TABLE to live in RO_DATA ...
2019-11-26Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds2-1/+15
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "These are the fixes left over from the v5.4 cycle: - Various low level 32-bit entry code fixes and improvements by Andy Lutomirski, Peter Zijlstra and Thomas Gleixner. - Fix 32-bit Xen PV breakage, by Jan Beulich" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/entry/32: Fix FIXUP_ESPFIX_STACK with user CR3 x86/pti/32: Calculate the various PTI cpu_entry_area sizes correctly, make the CPU_ENTRY_AREA_PAGES assert precise selftests/x86/sigreturn/32: Invalidate DS and ES when abusing the kernel selftests/x86/mov_ss_trap: Fix the SYSENTER test x86/entry/32: Fix NMI vs ESPFIX x86/entry/32: Unwind the ESPFIX stack earlier on exception entry x86/entry/32: Move FIXUP_FRAME after pushing %fs in SAVE_ALL x86/entry/32: Use %ss segment where required x86/entry/32: Fix IRET exception x86/cpu_entry_area: Add guard page for entry stack on 32bit x86/pti/32: Size initial_page_table correctly x86/doublefault/32: Fix stack canaries in the double fault handler x86/xen/32: Simplify ring check in xen_iret_crit_fixup() x86/xen/32: Make xen_iret_crit_fixup() independent of frame layout x86/stackframe/32: Repair 32-bit Xen PV
2019-11-26Merge branches 'x86-cpu-for-linus' and 'x86-fpu-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cpu and fpu updates from Ingo Molnar: - math-emu fixes - CPUID updates - sanity-check RDRAND output to see whether the CPU at least pretends to produce random data - various unaligned-access across cachelines fixes in preparation of hardware level split-lock detection - fix MAXSMP constraints to not allow !CPUMASK_OFFSTACK kernels with larger than 512 NR_CPUS - misc FPU related cleanups * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Align the x86_capability array to size of unsigned long x86/cpu: Align cpu_caps_cleared and cpu_caps_set to unsigned long x86/umip: Make the comments vendor-agnostic x86/Kconfig: Rename UMIP config parameter x86/Kconfig: Enforce limit of 512 CPUs with MAXSMP and no CPUMASK_OFFSTACK x86/cpufeatures: Add feature bit RDPRU on AMD x86/math-emu: Limit MATH_EMULATION to 486SX compatibles x86/math-emu: Check __copy_from_user() result x86/rdrand: Sanity-check RDRAND output * 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fpu: Use XFEATURE_FP/SSE enum values instead of hardcoded numbers x86/fpu: Shrink space allocated for xstate_comp_offsets x86/fpu: Update stale variable name in comment
2019-11-26Merge branches 'core-objtool-for-linus', 'x86-cleanups-for-linus' and ↵Linus Torvalds1-2/+2
'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 objtool, cleanup, and apic updates from Ingo Molnar: "Objtool: - Fix a gawk 5.0 incompatibility in gen-insn-attr-x86.awk. Most distros are still on gawk 4.2.x. Cleanup: - Misc cleanups, plus the removal of obsolete code such as Calgary IOMMU support, which code hasn't seen any real testing in a long time and there's no known users left. apic: - Two changes: a cleanup and a fix for an (old) race for oneshot threaded IRQ handlers" * 'core-objtool-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/insn: Fix awk regexp warnings * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Remove unused asm/rio.h x86: Fix typos in comments x86/pci: Remove #ifdef __KERNEL__ guard from <asm/pci.h> x86/pci: Remove pci_64.h x86: Remove the calgary IOMMU driver x86/apic, x86/uprobes: Correct parameter names in kernel-doc comments x86/kdump: Remove the unused crash_copy_backup_region() x86/nmi: Remove stale EDAC include leftover * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ioapic: Rename misnamed functions x86/ioapic: Prevent inconsistent state when moving an interrupt
2019-11-26perf tools: Allow to link with libbpf dynamicalyJiri Olsa5-2/+28
Currently we support only static linking with kernel's libbpf (tools/lib/bpf). This patch adds libbpf package detection and support to link perf with it dynamically. The libbpf package status is displayed with: $ make VF=1 Auto-detecting system features: ... ... libbpf: [ on ] It's not checked by default, because it's quite new. Once it's on most distros we can switch it on. For the same reason it's not added to the test-all check. Perf does not need advanced version of libbpf, so we can check just for the base bpf_object__open function. Adding new compile variable to detect libbpf package and link bpf dynamically: $ make LIBBPF_DYNAMIC=1 ... LINK perf $ ldd perf | grep bpf libbpf.so.0 => /lib64/libbpf.so.0 (0x00007f46818bc000) If libbpf is not installed, build stops with: Makefile.config:486: *** Error: No libbpf devel library found,\ please install libbpf-devel. Stop. Committer testing: $ make LIBBPF_DYNAMIC=1 -C tools/perf O=/tmp/build/perf make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j8' parallel build Makefile.config:493: *** Error: No libbpf devel library found, please install libbpf-devel. Stop. make[1]: *** [Makefile.perf:225: sub-make] Error 2 make: *** [Makefile:70: all] Error 2 make: Leaving directory '/home/acme/git/perf/tools/perf' $ Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Toke Høiland-Jørgensen <toke@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Andrii Nakryiko <andriin@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: http://lore.kernel.org/lkml/20191126121253.28253-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-26perf tests: Rename tests/map_groups.c to tests/maps.cArnaldo Carvalho de Melo4-5/+5
One more step in mergint the maps and map_groups structs. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-bw6aagubqxc47m54k2maezfu@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-26perf tests: Rename thread-mg-share to thread-maps-shareArnaldo Carvalho de Melo4-15/+15
One more step in merging 'struct maps' with 'struct map_groups'. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-naxsl3g4ou3fyxb8l8e0pn5e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-26perf maps: Rename map_groups.h to maps.hArnaldo Carvalho de Melo11-13/+13
One more step in the merge of 'struct maps' with 'struct map_groups'. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-9ibtn3vua76f934t7woyf26w@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-26perf maps: Rename 'mg' variables to 'maps'Arnaldo Carvalho de Melo10-140/+135
Continuing the merge of 'struct maps' with 'struct map_groups'. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-z8d14wrw393a0fbvmnk1bqd9@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-26perf map_symbol: Rename ms->mg to ms->mapsArnaldo Carvalho de Melo9-16/+16
One more step on the merge of 'struct maps' with 'struct map_groups'. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-61rra2wg392rhvdgw421wzpt@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-26perf addr_location: Rename al->mg to al->mapsArnaldo Carvalho de Melo9-24/+24
One more step on the merge of 'struct maps' with 'struct map_groups'. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-foo95pyyp3bhocbt7yd8qrvq@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-26perf thread: Rename thread->mg to thread->mapsArnaldo Carvalho de Melo19-49/+49
One more step on the merge of 'struct maps' with 'struct map_groups'. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-69vcr8pubpym90skxhmbwhiw@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-02 15:07:39 +0000