summaryrefslogtreecommitdiffstats
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2021-03-14Merge tag 'objtool-urgent-2021-03-14' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fix from Thomas Gleixner: "A single objtool fix to handle the PUSHF/POPF validation correctly for the paravirt changes which modified arch_local_irq_restore not to use popf" * tag 'objtool-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool,x86: Fix uaccess PUSHF/POPF validation
2021-03-12Merge tag 'arm64-fixes' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "We've got a smattering of changes all over the place which we've acrued since -rc1. To my knowledge, there aren't any pending issues at the moment, but there's still plenty of time for something else to crop up... Summary: - Fix booting a 52-bit-VA-aware kernel on Qualcomm Amberwing - Fix pfn_valid() not to reject all ZONE_DEVICE memory - Fix memory tagging setup for hotplugged memory regions - Fix KASAN tagging in page_alloc() when DEBUG_VIRTUAL is enabled - Fix accidental truncation of CPU PMU event counters - Fix error code initialisation when failing probe of DMC620 PMU - Fix return value initialisation for sve-ptrace selftest - Drop broken support for CMDLINE_EXTEND" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: perf/arm_dmc620_pmu: Fix error return code in dmc620_pmu_device_probe() arm64: mm: remove unused __cpu_uses_extended_idmap[_level()] arm64: mm: use a 48-bit ID map when possible on 52-bit VA builds arm64: perf: Fix 64-bit event counter read truncation arm64/mm: Fix __enable_mmu() for new TGRAN range values kselftest: arm64: Fix exit code of sve-ptrace arm64: mte: Map hotplugged memory as Normal Tagged arm64: kasan: fix page_alloc tagging with DEBUG_VIRTUAL arm64/mm: Reorganize pfn_valid() arm64/mm: Fix pfn_valid() for ZONE_DEVICE based memory arm64/mm: Drop THP conditionality from FORCE_MAX_ZONEORDER arm64/mm: Drop redundant ARCH_WANT_HUGE_PMD_SHARE arm64: Drop support for CMDLINE_EXTEND arm64: cpufeatures: Fix handling of CONFIG_CMDLINE for idreg overrides
2021-03-12objtool,x86: Fix uaccess PUSHF/POPF validationPeter Zijlstra1-0/+3
Commit ab234a260b1f ("x86/pv: Rework arch_local_irq_restore() to not use popf") replaced "push %reg; popf" with something like: "test $0x200, %reg; jz 1f; sti; 1:", which breaks the pushf/popf symmetry that commit ea24213d8088 ("objtool: Add UACCESS validation") relies on. The result is: drivers/gpu/drm/amd/amdgpu/si.o: warning: objtool: si_common_hw_init()+0xf36: PUSHF stack exhausted Meanwhile, commit c9c324dc22aa ("objtool: Support stack layout changes in alternatives") makes that we can actually use stack-ops in alternatives, which means we can revert 1ff865e343c2 ("x86,smap: Fix smap_{save,restore}() alternatives"). That in turn means we can limit the PUSHF/POPF handling of ea24213d8088 to those instructions that are in alternatives. Fixes: ab234a260b1f ("x86/pv: Rework arch_local_irq_restore() to not use popf") Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lkml.kernel.org/r/YEY4rIbQYa5fnnEp@hirez.programming.kicks-ass.net
2021-03-10kselftest: arm64: Fix exit code of sve-ptraceMark Brown1-1/+1
We track if sve-ptrace encountered a failure in a variable but don't actually use that value when we exit the program, do so. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210309190304.39169-1-broonie@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2021-03-09Merge git://git.kernel.org:/pub/scm/linux/kernel/git/netdev/netLinus Torvalds15-14/+214
Pull networking fixes from David Miller: 1) Fix transmissions in dynamic SMPS mode in ath9k, from Felix Fietkau. 2) TX skb error handling fix in mt76 driver, also from Felix. 3) Fix BPF_FETCH atomic in x86 JIT, from Brendan Jackman. 4) Avoid double free of percpu pointers when freeing a cloned bpf prog. From Cong Wang. 5) Use correct printf format for dma_addr_t in ath11k, from Geert Uytterhoeven. 6) Fix resolve_btfids build with older toolchains, from Kun-Chuan Hsieh. 7) Don't report truncated frames to mac80211 in mt76 driver, from Lorenzop Bianconi. 8) Fix watcdog timeout on suspend/resume of stmmac, from Joakim Zhang. 9) mscc ocelot needs NET_DEVLINK selct in Kconfig, from Arnd Bergmann. 10) Fix sign comparison bug in TCP_ZEROCOPY_RECEIVE getsockopt(), from Arjun Roy. 11) Ignore routes with deleted nexthop object in mlxsw, from Ido Schimmel. 12) Need to undo tcp early demux lookup sometimes in nf_nat, from Florian Westphal. 13) Fix gro aggregation for udp encaps with zero csum, from Daniel Borkmann. 14) Make sure to always use imp*_ndo_send when necessaey, from Jason A. Donenfeld. 15) Fix TRSCER masks in sh_eth driver from Sergey Shtylyov. 16) prevent overly huge skb allocationsd in qrtr, from Pavel Skripkin. 17) Prevent rx ring copnsumer index loss of sync in enetc, from Vladimir Oltean. 18) Make sure textsearch copntrol block is large enough, from Wilem de Bruijn. 19) Revert MAC changes to r8152 leading to instability, from Hates Wang. 20) Advance iov in 9p even for empty reads, from Jissheng Zhang. 21) Double hook unregister in nftables, from PabloNeira Ayuso. 22) Fix memleak in ixgbe, fropm Dinghao Liu. 23) Avoid dups in pkt scheduler class dumps, from Maximilian Heyne. 24) Various mptcp fixes from Florian Westphal, Paolo Abeni, and Geliang Tang. 25) Fix DOI refcount bugs in cipso, from Paul Moore. 26) One too many irqsave in ibmvnic, from Junlin Yang. 27) Fix infinite loop with MPLS gso segmenting via virtio_net, from Balazs Nemeth. * git://git.kernel.org:/pub/scm/linux/kernel/git/netdev/net: (164 commits) s390/qeth: fix notification for pending buffers during teardown s390/qeth: schedule TX NAPI on QAOB completion s390/qeth: improve completion of pending TX buffers s390/qeth: fix memory leak after failed TX Buffer allocation net: avoid infinite loop in mpls_gso_segment when mpls_hlen == 0 net: check if protocol extracted by virtio_net_hdr_set_proto is correct net: dsa: xrs700x: check if partner is same as port in hsr join net: lapbether: Remove netif_start_queue / netif_stop_queue atm: idt77252: fix null-ptr-dereference atm: uPD98402: fix incorrect allocation atm: fix a typo in the struct description net: qrtr: fix error return code of qrtr_sendmsg() mptcp: fix length of ADD_ADDR with port sub-option net: bonding: fix error return code of bond_neigh_init() net: enetc: allow hardware timestamping on TX queues with tc-etf enabled net: enetc: set MAC RX FIFO to recommended value net: davicom: Use platform_get_irq_optional() net: davicom: Fix regulator not turned off on driver removal net: davicom: Fix regulator not turned off on failed probe net: dsa: fix switchdev objects on bridge master mistakenly being applied on ports ...
2021-03-09Merge tag 'gpio-fixes-for-v5.12-rc3' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: "A bunch of fixes for the GPIO subsystem. We have two regressions in the core code spotted right after the merge window, a series of fixes for ACPI GPIO and a subsequent fix for a related regression in gpio-pca953x + a minor tweak in .gitignore and a rework of handling of the gpio-line-names to remedy a regression in stm32mp151. Summary: - fix two regressions in core GPIO subsystem code: one NULL-pointer dereference and one list corruption - read GPIO line names from fwnode instead of using the generic device properties to fix a regression on stm32mp151 - fixes to ACPI GPIO and gpio-pca953x to handle a regression in IRQ handling on Intel Galileo - update .gitignore in GPIO selftests" * tag 'gpio-fixes-for-v5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpiolib: Read "gpio-line-names" from a firmware node gpio: pca953x: Set IRQ type when handle Intel Galileo Gen 2 gpiolib: acpi: Allow to find GpioInt() resource by name and index gpiolib: acpi: Add ACPI_GPIO_QUIRK_ABSOLUTE_NUMBER quirk gpiolib: acpi: Add missing IRQF_ONESHOT gpio: fix gpio-device list corruption gpio: fix NULL-deref-on-deregistration regression selftests: gpio: update .gitignore
2021-03-08selftests: gpio: update .gitignoreBartosz Golaszewski1-1/+1
The executable that we build for GPIO selftests was renamed to gpio-mockup-cdev. Let's update .gitignore so that we don't show it as an untracked file. Fixes: 8bc395a6a2e2 ("selftests: gpio: rework and simplify test implementation") Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Kent Gibson <warthog618@gmail.com>
2021-03-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller2-1/+100
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Fix incorrect enum type definition in nfnetlink_cthelper UAPI, from Dmitry V. Levin. 2) Remove extra space in deprecated automatic helper assignment notice, from Klemen Košir. 3) Drop early socket demux socket after NAT mangling, from Florian Westphal. Add a test to exercise this bug. 4) Fix bogus invalid packet report in the conntrack TCP tracker, also from Florian. 5) Fix access to xt[NFPROTO_UNSPEC] list with no mutex in target/match_revfn(), from Vasily Averin. 6) Disallow updates on the table ownership flag. 7) Fix double hook unregistration of tables with owner. 8) Remove bogus check on the table owner in __nft_release_tables(). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-06perf cs-etm: Fix bitmap for optionSuzuki K Poulose1-4/+8
When set option with macros ETM_OPT_CTXTID and ETM_OPT_TS, it wrongly takes these two values (14 and 28 prespectively) as bit masks, but actually both are the offset for bits. But this doesn't lead to further failure due to the AND logic operation will be always true for ETM_OPT_CTXTID / ETM_OPT_TS. This patch defines new independent macros (rather than using the "config" bits) for requesting the "contextid" and "timestamp" for cs_etm_set_option(). Signed-off-by: Suzuki Poulouse <suzuki.poulose@arm.com> Reviewed-by: Mike Leach <mike.leach@linaro.org> Cc: Al Grant <al.grant@arm.com> Cc: Daniel Kiss <daniel.kiss@arm.com> Cc: Denis Nikitin <denik@chromium.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Will Deacon <will@kernel.org> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-doc@vger.kernel.org Link: http://lore.kernel.org/lkml/20210206150833.42120-5-leo.yan@linaro.org [ Extract the change as a separate patch for easier review ] Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06perf trace: Fix race in signal handlingMichael Petlan1-3/+2
Since a lot of stuff happens before the SIGINT signal handler is registered (scanning /proc/*, etc.), on bigger systems, such as Cavium Sabre CN99xx, it may happen that first interrupt signal is lost and perf isn't correctly terminated. The reproduction code might look like the following: perf trace -a & PERF_PID=$! sleep 4 kill -INT $PERF_PID The issue has been found on a CN99xx machine with RHEL-8 and the patch fixes it by registering the signal handlers earlier in the init stage. Suggested-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Michael Petlan <mpetlan@redhat.com> Tested-by: Michael Petlan <mpetlan@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/lkml/YEJnaMzH2ctp3PPx@kernel.org/ Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06perf map: Tighten snprintf() string precision to pass gcc check on some ↵Arnaldo Carvalho de Melo1-4/+3
32-bit arches Noticed on a debian:experimental mips and mipsel cross build build environment: perfbuilder@ec265a086e9b:~$ mips-linux-gnu-gcc --version | head -1 mips-linux-gnu-gcc (Debian 10.2.1-3) 10.2.1 20201224 perfbuilder@ec265a086e9b:~$ CC /tmp/build/perf/util/map.o util/map.c: In function 'map__new': util/map.c:109:5: error: '%s' directive output may be truncated writing between 1 and 2147483645 bytes into a region of size 4096 [-Werror=format-truncation=] 109 | "%s/platforms/%s/arch-%s/usr/lib/%s", | ^~ In file included from /usr/mips-linux-gnu/include/stdio.h:867, from util/symbol.h:11, from util/map.c:2: /usr/mips-linux-gnu/include/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output 32 or more bytes (assuming 4294967321) into a destination of size 4096 67 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 68 | __bos (__s), __fmt, __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors Since we have the lenghts for what lands in that place, use it to give the compiler more info and make it happy. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06perf report: Fix -F for branch & mem modesRavi Bangoria1-2/+2
perf report fails to add valid additional fields with -F when used with branch or mem modes. Fix it. Before patch: $ perf record -b $ perf report -b -F +srcline_from --stdio Error: Invalid --fields key: `srcline_from' After patch: $ perf report -b -F +srcline_from --stdio # Samples: 8K of event 'cycles' # Event count (approx.): 8784 ... Committer notes: There was an inversion: when looking at branch stack dimensions (keys) it was checking if the sort mode was 'mem', not 'branch'. Fixes: aa6b3c99236b ("perf report: Make -F more strict like -s") Reported-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20210304062958.85465-1-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06perf tests x86: Move insn.h include to make sure it finds stddef.hArnaldo Carvalho de Melo2-2/+2
In some versions of alpine Linux the perf build is broken since commit 1d509f2a6ebca1ae ("x86/insn: Support big endian cross-compiles"): In file included from /usr/include/linux/byteorder/little_endian.h:13, from /usr/include/asm/byteorder.h:5, from arch/x86/util/../../../../arch/x86/include/asm/insn.h:10, from arch/x86/util/archinsn.c:2: /usr/include/linux/swab.h:161:8: error: unknown type name '__always_inline' static __always_inline __u16 __swab16p(const __u16 *p) So move the inclusion of arch/x86/include/asm/insn.h to later in the places where linux/stddef.h (that conditionally defines __always_inline) to workaround this problem on Alpine Linux 3.9 to 3.11, 3.12 onwards works. Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06perf test: Support the ins_lat check in the X86 specific testKan Liang4-0/+127
The ins_lat of PERF_SAMPLE_WEIGHT_STRUCT stands for the instruction latency, which is only available for X86. Add a X86 specific test for the ins_lat and PERF_SAMPLE_WEIGHT_STRUCT type. The test__x86_sample_parsing() uses the same way as the test__sample_parsing() to verify a sample type. Since the ins_lat and PERF_SAMPLE_WEIGHT_STRUCT are the only X86 specific sample type for now, the test__x86_sample_parsing() only verify the PERF_SAMPLE_WEIGHT_STRUCT type. Other sample types are still verified in the generic test. $ perf test 77 -v 77: x86 Sample parsing : --- start --- test child forked, pid 102370 test child finished with 0 ---- end ---- x86 Sample parsing: Ok Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Link: http://lore.kernel.org/lkml/1614787285-104151-2-git-send-email-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06perf test: Fix sample-parsing failure on non-x86 platformsKan Liang1-4/+0
Executing 'perf test 27' fails on s390: [root@t35lp46 perf]# ./perf test -Fv 27 27: Sample parsing --- start --- ---- end ---- Sample parsing: FAILED! [root@t35lp46 perf]# The commit fbefe9c2f87fd392 ("perf tools: Support arch specific PERF_SAMPLE_WEIGHT_STRUCT processing") changes the ins_lat to a model-specific variable only for X86, but perf test still verify the variable in the generic test. Remove the ins_lat check in the generic test. The following patch will add it in the X86 specific test. Fixes: fbefe9c2f87fd392 ("perf tools: Support arch specific PERF_SAMPLE_WEIGHT_STRUCT processing") Reported-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Tested-by: Thomas Richter <tmricht@linux.ibm.com> Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Link: http://lore.kernel.org/lkml/1614787285-104151-1-git-send-email-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06perf archive: Fix filtering of empty build-idsNicholas Fraser1-2/+1
A non-existent build-id used to be treated as all-zero SHA-1 hash. Build-ids are now variable width. A non-existent build-id is an empty string and "perf buildid-list" pads this with spaces. This is true even when using old perf.data files recorded from older versions of perf; "perf buildid-list" never reports an all-zero hash anymore. This fixes "perf-archive" to skip missing build-ids by skipping lines that start with a padding space rather than with zeroes. Signed-off-by: Nicholas Fraser <nfraser@codeweavers.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Huw Davies <huw@codeweavers.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ulrich Czekalla <uczekalla@codeweavers.com> Link: https://lore.kernel.org/r/442bffc7-ac5c-0975-b876-a549efce2413@codeweavers.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06perf daemon: Fix compile error with AsanNamhyung Kim1-1/+1
I'm seeing a build failure when build with address sanitizer. It seems we could write to the name[100] if the var is longer. $ make EXTRA_CFLAGS=-fsanitize=address ... CC builtin-daemon.o In function ‘get_session_name’, inlined from ‘session_config’ at builtin-daemon.c:164:6, inlined from ‘server_config’ at builtin-daemon.c:223:10: builtin-daemon.c:155:11: error: writing 1 byte into a region of size 0 [-Werror=stringop-overflow=] 155 | *session = 0; | ~~~~~~~~~^~~ builtin-daemon.c: In function ‘server_config’: builtin-daemon.c:162:7: note: at offset 100 to object ‘name’ with size 100 declared here 162 | char name[100]; | ^~~~ Fixes: c0666261ff38 ("perf daemon: Add config file support") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210224071438.686677-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06perf stat: Fix use-after-free when -r option is usedNamhyung Kim1-0/+1
I got a segfault when using -r option with event groups. The option makes it run the workload multiple times and it will reuse the evlist and evsel for each run. While most of resources are allocated and freed properly, the id hash in the evlist was not and it resulted in the bug. You can see it with the address sanitizer like below: $ perf stat -r 100 -e '{cycles,instructions}' true ================================================================= ==693052==ERROR: AddressSanitizer: heap-use-after-free on address 0x6080000003d0 at pc 0x558c57732835 bp 0x7fff1526adb0 sp 0x7fff1526ada8 WRITE of size 8 at 0x6080000003d0 thread T0 #0 0x558c57732834 in hlist_add_head /home/namhyung/project/linux/tools/include/linux/list.h:644 #1 0x558c57732834 in perf_evlist__id_hash /home/namhyung/project/linux/tools/lib/perf/evlist.c:237 #2 0x558c57732834 in perf_evlist__id_add /home/namhyung/project/linux/tools/lib/perf/evlist.c:244 #3 0x558c57732834 in perf_evlist__id_add_fd /home/namhyung/project/linux/tools/lib/perf/evlist.c:285 #4 0x558c5747733e in store_evsel_ids util/evsel.c:2765 #5 0x558c5747733e in evsel__store_ids util/evsel.c:2782 #6 0x558c5730b717 in __run_perf_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:895 #7 0x558c5730b717 in run_perf_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:1014 #8 0x558c5730b717 in cmd_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:2446 #9 0x558c57427c24 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #10 0x558c572b1a48 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #11 0x558c572b1a48 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #12 0x558c572b1a48 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #13 0x7fcadb9f7d09 in __libc_start_main ../csu/libc-start.c:308 #14 0x558c572b60f9 in _start (/home/namhyung/project/linux/tools/perf/perf+0x45d0f9) Actually the nodes in the hash table are struct perf_stream_id and they were freed in the previous run. Fix it by resetting the hash. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210225035148.778569-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06libperf: Add perf_evlist__reset_id_hash()Namhyung Kim2-4/+11
Add the perf_evlist__reset_id_hash() function as an internal function so that it can be called by perf to reset the hash table. This is necessary for 'perf stat' to run the workload multiple times. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210225035148.778569-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06perf stat: Fix wrong skipping for per-die aggregationJin Yao4-11/+59
Uncore becomes die-scope on Xeon Cascade Lake-AP and perf has supported --per-die aggregation yet. One issue is found in check_per_pkg() for uncore events running on AP system. On cascade Lake-AP, we have: S0-D0 S0-D1 S1-D0 S1-D1 But in check_per_pkg(), S0-D1 and S1-D1 are skipped because the mask bits for S0 and S1 have been set for S0-D0 and S1-D0. It doesn't check die_id. So the counting for S0-D1 and S1-D1 are set to zero. That's not correct. root@lkp-csl-2ap4 ~# ./perf stat -a -I 1000 -e llc_misses.mem_read --per-die -- sleep 5 1.001460963 S0-D0 1 1317376 Bytes llc_misses.mem_read 1.001460963 S0-D1 1 998016 Bytes llc_misses.mem_read 1.001460963 S1-D0 1 970496 Bytes llc_misses.mem_read 1.001460963 S1-D1 1 1291264 Bytes llc_misses.mem_read 2.003488021 S0-D0 1 1082048 Bytes llc_misses.mem_read 2.003488021 S0-D1 1 1919040 Bytes llc_misses.mem_read 2.003488021 S1-D0 1 890752 Bytes llc_misses.mem_read 2.003488021 S1-D1 1 2380800 Bytes llc_misses.mem_read 3.005613270 S0-D0 1 1126080 Bytes llc_misses.mem_read 3.005613270 S0-D1 1 2898176 Bytes llc_misses.mem_read 3.005613270 S1-D0 1 870912 Bytes llc_misses.mem_read 3.005613270 S1-D1 1 3388608 Bytes llc_misses.mem_read 4.007627598 S0-D0 1 1124608 Bytes llc_misses.mem_read 4.007627598 S0-D1 1 3884416 Bytes llc_misses.mem_read 4.007627598 S1-D0 1 921088 Bytes llc_misses.mem_read 4.007627598 S1-D1 1 4451840 Bytes llc_misses.mem_read 5.001479927 S0-D0 1 963328 Bytes llc_misses.mem_read 5.001479927 S0-D1 1 4831936 Bytes llc_misses.mem_read 5.001479927 S1-D0 1 895104 Bytes llc_misses.mem_read 5.001479927 S1-D1 1 5496640 Bytes llc_misses.mem_read From above output, we can see S0-D1 and S1-D1 don't report the interval values, they are continued to grow. That's because check_per_pkg() wrongly decides to use zero counts for S0-D1 and S1-D1. So in check_per_pkg(), we should use hashmap(socket,die) to decide if the cpu counts needs to skip. Only considering socket is not enough. Now with this patch, root@lkp-csl-2ap4 ~# ./perf stat -a -I 1000 -e llc_misses.mem_read --per-die -- sleep 5 1.001586691 S0-D0 1 1229440 Bytes llc_misses.mem_read 1.001586691 S0-D1 1 976832 Bytes llc_misses.mem_read 1.001586691 S1-D0 1 938304 Bytes llc_misses.mem_read 1.001586691 S1-D1 1 1227328 Bytes llc_misses.mem_read 2.003776312 S0-D0 1 1586752 Bytes llc_misses.mem_read 2.003776312 S0-D1 1 875392 Bytes llc_misses.mem_read 2.003776312 S1-D0 1 855616 Bytes llc_misses.mem_read 2.003776312 S1-D1 1 949376 Bytes llc_misses.mem_read 3.006512788 S0-D0 1 1338880 Bytes llc_misses.mem_read 3.006512788 S0-D1 1 920064 Bytes llc_misses.mem_read 3.006512788 S1-D0 1 877184 Bytes llc_misses.mem_read 3.006512788 S1-D1 1 1020736 Bytes llc_misses.mem_read 4.008895291 S0-D0 1 926592 Bytes llc_misses.mem_read 4.008895291 S0-D1 1 906368 Bytes llc_misses.mem_read 4.008895291 S1-D0 1 892224 Bytes llc_misses.mem_read 4.008895291 S1-D1 1 987712 Bytes llc_misses.mem_read 5.001590993 S0-D0 1 962624 Bytes llc_misses.mem_read 5.001590993 S0-D1 1 912512 Bytes llc_misses.mem_read 5.001590993 S1-D0 1 891200 Bytes llc_misses.mem_read 5.001590993 S1-D1 1 978432 Bytes llc_misses.mem_read On no-die system, die_id is 0, actually it's hashmap(socket,0), original behavior is not changed. Reported-by: Ying Huang <ying.huang@intel.com> Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Huang <ying.huang@intel.com> Link: http://lore.kernel.org/lkml/20210128013417.25597-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06tools headers UAPI: Sync KVM's kvm.h and vmx.h headers with the kernel sourcesArnaldo Carvalho de Melo2-1/+4
To pick the changes in: fe6b6bc802b40081 ("KVM: VMX: Enable bus lock VM exit") That makes 'perf kvm-stat' aware of this new BUS_LOCK exit reason, thus addressing the following perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/vmx.h' differs from latest version at 'arch/x86/include/uapi/asm/vmx.h' diff -u tools/arch/x86/include/uapi/asm/vmx.h arch/x86/include/uapi/asm/vmx.h Cc: Chenyi Qiang <chenyi.qiang@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06tools headers cpufeatures: Sync with the kernel sourcesArnaldo Carvalho de Melo1-6/+13
To pick the changes from: 3b9c723ed7cfa4e1 ("KVM: SVM: Add support for SVM instruction address check change") b85a0425d8056f3b ("Enumerate AVX Vector Neural Network instructions") fb35d30fe5b06cc2 ("x86/cpufeatures: Assign dedicated feature word for CPUID_0x8000001F[EAX]") This only causes these perf files to be rebuilt: CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o And addresses this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h' diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h Cc: Borislav Petkov <bp@suse.de> Cc: Kyung Min Park <kyung.min.park@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Wei Huang <wei.huang2@amd.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06tools headers UAPI: Update tools' copy of linux/coresight-pmu.hArnaldo Carvalho de Melo1-5/+15
To get the changes in these commits: 88f11864cf1d1324 ("coresight: etm-perf: Support PID tracing for kernel at EL2") 53abf3fe83175626 ("coresight: etm-perf: Clarify comment on perf options") This will possibly be used in patches lined up for v5.13. And silence this perf build warning: Warning: Kernel ABI header at 'tools/include/linux/coresight-pmu.h' differs from latest version at 'include/linux/coresight-pmu.h' diff -u tools/include/linux/coresight-pmu.h include/linux/coresight-pmu.h Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06tools headers: Update syscall.tbl files to support mount_setattrArnaldo Carvalho de Melo4-0/+19
To pick the changes from: 9caccd41541a6f7d ("fs: introduce MOUNT_ATTR_IDMAP") This adds this new syscall to the tables used by tools such as 'perf trace', so that one can specify it by name and have it filtered, etc. Addressing these perf build warnings: Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl' diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl Warning: Kernel ABI header at 'tools/perf/arch/powerpc/entry/syscalls/syscall.tbl' differs from latest version at 'arch/powerpc/kernel/syscalls/syscall.tbl' diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl Warning: Kernel ABI header at 'tools/perf/arch/s390/entry/syscalls/syscall.tbl' differs from latest version at 'arch/s390/kernel/syscalls/syscall.tbl' diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/YD6Wsxr9ByUbab/a@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06perf test: Fix cpu and thread map leaks in perf_time_to_tsc testNamhyung Kim1-0/+2
It should release the maps at the end. $ perf test -v 71 71: Convert perf time to TSC : --- start --- test child forked, pid 178744 mmap size 528384B 1st event perf time 59207256505278 tsc 13187166645142 rdtsc time 59207256542151 tsc 13187166723020 2nd event perf time 59207256543749 tsc 13187166726393 ================================================================= ==178744==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7faf601f9e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x55b620cfc00a in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79 #2 0x55b620cfca2f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149 #3 0x55b620cfd1ef in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166 #4 0x55b620cfd1ef in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181 #5 0x55b6209ef1b2 in test__perf_time_to_tsc tests/perf-time-to-tsc.c:73 #6 0x55b6209828fb in run_test tests/builtin-test.c:428 #7 0x55b6209828fb in test_and_print tests/builtin-test.c:458 #8 0x55b620984a53 in __cmd_test tests/builtin-test.c:679 #9 0x55b620984a53 in cmd_test tests/builtin-test.c:825 #10 0x55b6209f0cd4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #11 0x55b62087aa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #12 0x55b62087aa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #13 0x55b62087aa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #14 0x7faf5fd2fd09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 72 byte(s) leaked in 2 allocation(s). test child finished with 1 ---- end ---- Convert perf time to TSC: FAILED! Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210301140409.184570-12-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06perf test: Fix cpu map leaks in cpu_map_print testNamhyung Kim1-0/+2
It should be released after printing the map. $ perf test -v 52 52: Print cpu map : --- start --- test child forked, pid 172233 ================================================================= ==172233==ERROR: LeakSanitizer: detected memory leaks Direct leak of 156 byte(s) in 1 object(s) allocated from: #0 0x7fc472518e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x55e63b378f7a in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79 #2 0x55e63b37a05c in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:237 #3 0x55e63b056d16 in cpu_map_print tests/cpumap.c:102 #4 0x55e63b056d16 in test__cpu_map_print tests/cpumap.c:120 #5 0x55e63afff8fb in run_test tests/builtin-test.c:428 #6 0x55e63afff8fb in test_and_print tests/builtin-test.c:458 #7 0x55e63b001a53 in __cmd_test tests/builtin-test.c:679 #8 0x55e63b001a53 in cmd_test tests/builtin-test.c:825 #9 0x55e63b06dc44 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #10 0x55e63aef7a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #11 0x55e63aef7a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #12 0x55e63aef7a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #13 0x7fc47204ed09 in __libc_start_main ../csu/libc-start.c:308 ... SUMMARY: AddressSanitizer: 448 byte(s) leaked in 7 allocation(s). test child finished with 1 ---- end ---- Print cpu map: FAILED! Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210301140409.184570-11-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06perf test: Fix a memory leak in thread_map_remove testNamhyung Kim1-5/+2
The str should be freed after creating a thread map. Also change the open-coded thread map deletion to a call to perf_thread_map__put(). $ perf test -v 44 44: Remove thread map : --- start --- test child forked, pid 165536 2 threads: 165535, 165536 1 thread: 165536 0 thread: ================================================================= ==165536==ERROR: LeakSanitizer: detected memory leaks Direct leak of 14 byte(s) in 1 object(s) allocated from: #0 0x7f54453ffe8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x7f5444f8c6a7 in __vasprintf_internal libio/vasprintf.c:71 SUMMARY: AddressSanitizer: 14 byte(s) leaked in 1 allocation(s). test child finished with 1 ---- end ---- Remove thread map: FAILED! Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210301140409.184570-10-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06perf test: Fix a thread map leak in thread_map_synthesize testNamhyung Kim1-0/+1
It missed to call perf_thread_map__put() after using the map. $ perf test -v 43 43: Synthesize thread map : --- start --- test child forked, pid 162640 ================================================================= ==162640==ERROR: LeakSanitizer: detected memory leaks Direct leak of 32 byte(s) in 1 object(s) allocated from: #0 0x7fd48cdaa1f8 in __interceptor_realloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:164 #1 0x563e6d5f8d0e in perf_thread_map__realloc /home/namhyung/project/linux/tools/lib/perf/threadmap.c:23 #2 0x563e6d3ef69a in thread_map__new_by_pid util/thread_map.c:46 #3 0x563e6d2cec90 in test__thread_map_synthesize tests/thread-map.c:97 #4 0x563e6d27d8fb in run_test tests/builtin-test.c:428 #5 0x563e6d27d8fb in test_and_print tests/builtin-test.c:458 #6 0x563e6d27fa53 in __cmd_test tests/builtin-test.c:679 #7 0x563e6d27fa53 in cmd_test tests/builtin-test.c:825 #8 0x563e6d2ebce4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #9 0x563e6d175a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #10 0x563e6d175a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #11 0x563e6d175a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #12 0x7fd48c8dfd09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 8224 byte(s) leaked in 2 allocation(s). test child finished with 1 ---- end ---- Synthesize thread map: FAILED! Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210301140409.184570-9-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06perf test: Fix cpu and thread map leaks in switch_tracking testNamhyung Kim1-3/+2
The evlist and cpu/thread maps should be released together. Otherwise the following error was reported by Asan. $ perf test -v 35 35: Track with sched_switch : --- start --- test child forked, pid 159287 Using CPUID GenuineIntel-6-8E-C mmap size 528384B 1295 events recorded ================================================================= ==159287==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7fa28d9a2e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x5652f5a5affa in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79 #2 0x5652f5a5ba1f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149 #3 0x5652f5a5c1df in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166 #4 0x5652f5a5c1df in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181 #5 0x5652f5723bbf in test__switch_tracking tests/switch-tracking.c:350 #6 0x5652f56e18fb in run_test tests/builtin-test.c:428 #7 0x5652f56e18fb in test_and_print tests/builtin-test.c:458 #8 0x5652f56e3a53 in __cmd_test tests/builtin-test.c:679 #9 0x5652f56e3a53 in cmd_test tests/builtin-test.c:825 #10 0x5652f574fcc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #11 0x5652f55d9a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #12 0x5652f55d9a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #13 0x5652f55d9a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #14 0x7fa28d4d8d09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 72 byte(s) leaked in 2 allocation(s). test child finished with 1 ---- end ---- Track with sched_switch: FAILED! Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210301140409.184570-8-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06perf test: Fix cpu and thread map leaks in keep_tracking testNamhyung Kim1-3/+2
The evlist and the cpu/thread maps should be released together. Otherwise following error was reported by Asan. $ perf test -v 28 28: Use a dummy software event to keep tracking: --- start --- test child forked, pid 156810 mmap size 528384B ================================================================= ==156810==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f637d2bce8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x55cc6295cffa in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79 #2 0x55cc6295da1f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149 #3 0x55cc6295e1df in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166 #4 0x55cc6295e1df in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181 #5 0x55cc626287cf in test__keep_tracking tests/keep-tracking.c:84 #6 0x55cc625e38fb in run_test tests/builtin-test.c:428 #7 0x55cc625e38fb in test_and_print tests/builtin-test.c:458 #8 0x55cc625e5a53 in __cmd_test tests/builtin-test.c:679 #9 0x55cc625e5a53 in cmd_test tests/builtin-test.c:825 #10 0x55cc62651cc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #11 0x55cc624dba88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #12 0x55cc624dba88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #13 0x55cc624dba88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #14 0x7f637cdf2d09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 72 byte(s) leaked in 2 allocation(s). test child finished with 1 ---- end ---- Use a dummy software event to keep tracking: FAILED! Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210301140409.184570-7-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06perf test: Fix cpu and thread map leaks in code_reading testNamhyung Kim1-7/+3
The evlist and the cpu/thread maps should be released together. Otherwise following error was reported by Asan. Note that this test still has memory leaks in DSOs so it still fails even after this change. I'll take a look at that too. # perf test -v 26 26: Object code reading : --- start --- test child forked, pid 154184 Looking at the vmlinux_path (8 entries long) symsrc__init: build id mismatch for vmlinux. symsrc__init: cannot get elf header. Using /proc/kcore for kernel data Using /proc/kallsyms for symbols Parsing event 'cycles' mmap size 528384B ... ================================================================= ==154184==ERROR: LeakSanitizer: detected memory leaks Direct leak of 439 byte(s) in 1 object(s) allocated from: #0 0x7fcb66e77037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x55ad9b7e821e in dso__new_id util/dso.c:1256 #2 0x55ad9b8cfd4a in __machine__addnew_vdso util/vdso.c:132 #3 0x55ad9b8cfd4a in machine__findnew_vdso util/vdso.c:347 #4 0x55ad9b845b7e in map__new util/map.c:176 #5 0x55ad9b8415a2 in machine__process_mmap2_event util/machine.c:1787 #6 0x55ad9b8fab16 in perf_tool__process_synth_event util/synthetic-events.c:64 #7 0x55ad9b8fab16 in perf_event__synthesize_mmap_events util/synthetic-events.c:499 #8 0x55ad9b8fbfdf in __event__synthesize_thread util/synthetic-events.c:741 #9 0x55ad9b8ff3e3 in perf_event__synthesize_thread_map util/synthetic-events.c:833 #10 0x55ad9b738585 in do_test_code_reading tests/code-reading.c:608 #11 0x55ad9b73b25d in test__code_reading tests/code-reading.c:722 #12 0x55ad9b6f28fb in run_test tests/builtin-test.c:428 #13 0x55ad9b6f28fb in test_and_print tests/builtin-test.c:458 #14 0x55ad9b6f4a53 in __cmd_test tests/builtin-test.c:679 #15 0x55ad9b6f4a53 in cmd_test tests/builtin-test.c:825 #16 0x55ad9b760cc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #17 0x55ad9b5eaa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #18 0x55ad9b5eaa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #19 0x55ad9b5eaa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #20 0x7fcb669acd09 in __libc_start_main ../csu/libc-start.c:308 ... SUMMARY: AddressSanitizer: 471 byte(s) leaked in 2 allocation(s). test child finished with 1 ---- end ---- Object code reading: FAILED! Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210301140409.184570-6-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06perf test: Fix cpu and thread map leaks in sw_clock_freq testNamhyung Kim1-8/+4
The evlist has the maps with its own refcounts so we don't need to set the pointers to NULL. Otherwise following error was reported by Asan. Also change the goto label since it doesn't need to have two. # perf test -v 25 25: Software clock events period values : --- start --- test child forked, pid 149154 mmap size 528384B mmap size 528384B ================================================================= ==149154==ERROR: LeakSanitizer: detected memory leaks Direct leak of 32 byte(s) in 1 object(s) allocated from: #0 0x7fef5cd071f8 in __interceptor_realloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:164 #1 0x56260d5e8b8e in perf_thread_map__realloc /home/namhyung/project/linux/tools/lib/perf/threadmap.c:23 #2 0x56260d3df7a9 in thread_map__new_by_tid util/thread_map.c:63 #3 0x56260d2ac6b2 in __test__sw_clock_freq tests/sw-clock.c:65 #4 0x56260d26d8fb in run_test tests/builtin-test.c:428 #5 0x56260d26d8fb in test_and_print tests/builtin-test.c:458 #6 0x56260d26fa53 in __cmd_test tests/builtin-test.c:679 #7 0x56260d26fa53 in cmd_test tests/builtin-test.c:825 #8 0x56260d2dbb64 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #9 0x56260d165a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #10 0x56260d165a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #11 0x56260d165a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #12 0x7fef5c83cd09 in __libc_start_main ../csu/libc-start.c:308 ... test child finished with 1 ---- end ---- Software clock events period values : FAILED! Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210301140409.184570-5-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06perf test: Fix cpu and thread map leaks in task_exit testNamhyung Kim1-7/+3
The evlist has the maps with its own refcounts so we don't need to set the pointers to NULL. Otherwise following error was reported by Asan. Also change the goto label since it doesn't need to have two. # perf test -v 24 24: Number of exit events of a simple workload : --- start --- test child forked, pid 145915 mmap size 528384B ================================================================= ==145915==ERROR: LeakSanitizer: detected memory leaks Direct leak of 32 byte(s) in 1 object(s) allocated from: #0 0x7fc44e50d1f8 in __interceptor_realloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:164 #1 0x561cf50f4d2e in perf_thread_map__realloc /home/namhyung/project/linux/tools/lib/perf/threadmap.c:23 #2 0x561cf4eeb949 in thread_map__new_by_tid util/thread_map.c:63 #3 0x561cf4db7fd2 in test__task_exit tests/task-exit.c:74 #4 0x561cf4d798fb in run_test tests/builtin-test.c:428 #5 0x561cf4d798fb in test_and_print tests/builtin-test.c:458 #6 0x561cf4d7ba53 in __cmd_test tests/builtin-test.c:679 #7 0x561cf4d7ba53 in cmd_test tests/builtin-test.c:825 #8 0x561cf4de7d04 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #9 0x561cf4c71a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #10 0x561cf4c71a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #11 0x561cf4c71a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #12 0x7fc44e042d09 in __libc_start_main ../csu/libc-start.c:308 ... test child finished with 1 ---- end ---- Number of exit events of a simple workload: FAILED! Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210301140409.184570-4-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06perf test: Fix a memory leak in attr testNamhyung Kim1-1/+7
The get_argv_exec_path() returns a dynamic memory so it should be freed after use. $ perf test -v 17 ... ==141682==ERROR: LeakSanitizer: detected memory leaks Direct leak of 33 byte(s) in 1 object(s) allocated from: #0 0x7f09107d2e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x7f091035f6a7 in __vasprintf_internal libio/vasprintf.c:71 SUMMARY: AddressSanitizer: 33 byte(s) leaked in 1 allocation(s). Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210301140409.184570-3-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06perf test: Fix cpu and thread map leaks in basic mmap testNamhyung Kim1-2/+0
The evlist has the maps with its own refcounts so we don't need to set the pointers to NULL. Otherwise following error was reported by Asan. # perf test -v 4 4: Read samples using the mmap interface : --- start --- test child forked, pid 139782 mmap size 528384B ================================================================= ==139782==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f1f76daee8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x564ba21a0fea in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79 #2 0x564ba21a1a0f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149 #3 0x564ba21a21cf in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166 #4 0x564ba21a21cf in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181 #5 0x564ba1e48298 in test__basic_mmap tests/mmap-basic.c:55 #6 0x564ba1e278fb in run_test tests/builtin-test.c:428 #7 0x564ba1e278fb in test_and_print tests/builtin-test.c:458 #8 0x564ba1e29a53 in __cmd_test tests/builtin-test.c:679 #9 0x564ba1e29a53 in cmd_test tests/builtin-test.c:825 #10 0x564ba1e95cb4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #11 0x564ba1d1fa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #12 0x564ba1d1fa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #13 0x564ba1d1fa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #14 0x7f1f768e4d09 in __libc_start_main ../csu/libc-start.c:308 ... test child finished with 1 ---- end ---- Read samples using the mmap interface: FAILED! failed to open shell test directory: /home/namhyung/libexec/perf-core/tests/shell Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Link: https://lore.kernel.org/r/20210301140409.184570-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06perf tools: Fix event's PMU name parsingJiri Olsa1-1/+5
Jin Yao reported parser error for software event: # perf stat -e software/r1a/ -a -- sleep 1 event syntax error: 'software/r1a/' \___ parser error This happens after commit 8c3b1ba0e7ea9a80 ("drm/i915/gt: Track the overall awake/busy time"), where new software-gt-awake-time event's non-pmu-event-style makes event parser conflict with software PMU. If we allow PE_PMU_EVENT_PRE to be parsed as PMU name, we fix the conflict and the following character '/' for PMU or '-' for non-pmu-event-style event allows parser to decide what even is specified. Fixes: 8c3b1ba0e7ea9a80 ("drm/i915/gt: Track the overall awake/busy time") Reported-by: Jin Yao <yao.jin@linux.intel.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210301122315.63471-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06perf daemon: Fix running test for non root userJiri Olsa1-16/+16
John reported that the daemon test is not working for non root user. Changing the tests configurations so it's allowed to run under normal user. Fixes: 2291bb915b55 ("perf tests: Add daemon 'list' command test") Reported-by: John Garry <john.garry@huawei.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: John Garry <john.garry@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210301122510.64402-2-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06perf daemon: Fix control fifo permissionsJiri Olsa1-2/+2
Add proper mode for mkfifo calls to get read and write permissions for user. We can't use O_RDWR in here, changing to standard permission value. Fixes: 6a6d1804a190 ("perf daemon: Set control fifo for session") Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: John Garry <john.garry@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210301122510.64402-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06perf build: Fix ccache usage in $(CC) when generating arch errno tableAntonio Terceiro1-1/+1
This was introduced by commit e4ffd066ff440a57 ("perf: Normalize gcc parameter when generating arch errno table"). Assuming the first word of $(CC) is the actual compiler breaks usage like CC="ccache gcc": the script ends up calling ccache directly with gcc arguments, what fails. Instead of getting the first word, just remove from $(CC) any word that starts with a "-". This maintains the spirit of the original patch, while not breaking ccache users. Fixes: e4ffd066ff440a57 ("perf: Normalize gcc parameter when generating arch errno table") Signed-off-by: Antonio Terceiro <antonio.terceiro@linaro.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: He Zhe <zhe.he@windriver.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20210224130046.346977-1-antonio.terceiro@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06perf tools: Fix documentation of verbose optionsIan Rogers4-6/+6
Option doesn't take a value, make sure the man pages agree. For example: $ perf evlist --verbose=1 Error: option `verbose' takes no value Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20210226183145.1878782-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06perf traceevent: Ensure read cmdlines are null terminated.Ian Rogers1-0/+1
Issue detected by address sanitizer. Fixes: cd4ceb63438e9e28 ("perf util: Save pid-cmdline mapping into tracing header") Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20210226221431.1985458-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06perf bench numa: Fix the condition checks for max number of NUMA nodesAthira Rajeev1-13/+29
In systems having higher node numbers available like node 255, perf numa bench will fail with SIGABORT. <<>> perf: bench/numa.c:1416: init: Assertion `!(g->p.nr_nodes > 64 || g->p.nr_nodes < 0)' failed. Aborted (core dumped) <<>> Snippet from 'numactl -H' below on a powerpc system where the highest node number available is 255: available: 6 nodes (0,8,252-255) node 0 cpus: <cpu-list> node 0 size: 519587 MB node 0 free: 516659 MB node 8 cpus: <cpu-list> node 8 size: 523607 MB node 8 free: 486757 MB node 252 cpus: node 252 size: 0 MB node 252 free: 0 MB node 253 cpus: node 253 size: 0 MB node 253 free: 0 MB node 254 cpus: node 254 size: 0 MB node 254 free: 0 MB node 255 cpus: node 255 size: 0 MB node 255 free: 0 MB node distances: node 0 8 252 253 254 255 Note: <cpu-list> expands to actual cpu list in the original output. These nodes 252-255 are to represent the memory on GPUs and are valid nodes. The perf numa bench init code has a condition check to see if the number of NUMA nodes (nr_nodes) exceeds MAX_NR_NODES. The value of MAX_NR_NODES defined in perf code is 64. And the 'nr_nodes' is the value from numa_max_node() which represents the highest node number available in the system. In some systems where we could have NUMA node 255, this condition check fails and results in SIGABORT. The numa benchmark uses static value of MAX_NR_NODES in the code to represent size of two NUMA node arrays and node bitmask used for setting memory policy. Patch adds a fix to dynamically allocate size for the two arrays and bitmask value based on the node numbers available in the system. With the fix, perf numa benchmark will work with node configuration on any system and thus removes the static MAX_NR_NODES value. Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lore.kernel.org/lkml/1614271802-1503-1-git-send-email-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06perf diff: Don't crash on freeing errno-session on the error pathDmitry Safonov1-1/+2
__cmd_diff() sets result of perf_session__new() to d->session. In case of failure, it's errno and perf-diff may crash with: failed to open perf.data: Permission denied Failed to open perf.data Segmentation fault (core dumped) From the coredump: 0 0x00005569a62b5955 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2681 1 0x00005569a626b37d in perf_session__delete (session=0xffffffffffffffff) at util/session.c:295 2 perf_session__delete (session=0xffffffffffffffff) at util/session.c:291 3 0x00005569a618008a in __cmd_diff () at builtin-diff.c:1239 4 cmd_diff (argc=<optimized out>, argv=<optimized out>) at builtin-diff.c:2011 [..] Funny enough, it won't always crash. For me it crashes only if failed file is second in cmd-line: the reason is that cmd_diff() check files for branch-stacks [in check_file_brstack()] and if the first file doesn't have brstacks, it doesn't proceed to try open other files from cmd-line. Check d->session before calling perf_session__delete(). Another solution would be assigning to temporary variable, checking it, but I find it easier to follow with IS_ERR() check in the same function. After some time it's still obvious why the check is needed, and with temp variable it's possible to make the same mistake. Committer testing: $ perf record sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.001 MB perf.data (8 samples) ] $ perf diff failed to open perf.data.old: No such file or directory Failed to open perf.data.old $ perf record sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.001 MB perf.data (8 samples) ] $ perf diff # Event 'cycles:u' # # Baseline Delta Abs Shared Object Symbol # ........ ......... ................ .......................... # 0.92% +87.66% [unknown] [k] 0xffffffff8825de16 11.39% +0.04% ld-2.32.so [.] __GI___tunables_init 87.70% ld-2.32.so [.] _dl_check_map_versions $ sudo chown root:root perf.data [sudo] password for acme: $ perf diff failed to open perf.data: Permission denied Failed to open perf.data Segmentation fault (core dumped) $ After the patch: $ perf diff failed to open perf.data: Permission denied Failed to open perf.data $ Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: dmitry safonov <dima@arista.com> Link: http://lore.kernel.org/lkml/20210302023533.1572231-1-dima@arista.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06perf tools: Clean 'generated' directory used for creating the syscall table ↵Andreas Wendleder1-5/+6
on x86 Remove generated directory tools/perf/arch/x86/include/generated. Signed-off-by: Andreas Wendleder <andreas.wendleder@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210301185642.163396-1-gonsolo@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06perf build: Move feature cleanup under tools/buildJiri Olsa2-10/+8
Arnaldo reported issue for following build command: $ rm -rf /tmp/krava; mkdir /tmp/krava; make O=/tmp/krava clean CLEAN config /bin/sh: line 0: cd: /tmp/krava/feature/: No such file or directory ../../scripts/Makefile.include:17: *** output directory "/tmp/krava/feature/" does not exist. Stop. make[1]: *** [Makefile.perf:1010: config-clean] Error 2 make: *** [Makefile:90: clean] Error 2 The problem is that now that we include scripts/Makefile.include in feature's Makefile (which is fine and needed), we need to ensure the OUTPUT directory exists, before executing (out of tree) clean command. Removing the feature's cleanup from perf Makefile and fixing feature's cleanup under build Makefile, so it now checks that there's existing OUTPUT directory before calling the clean. Fixes: 211a741cd3e1 ("tools: Factor Clang, LLC and LLVM utils definitions") Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13-git Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210224150831.409639-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06perf tools: Cast (struct timeval).tv_sec when printingPierre Gondois5-9/+9
The musl-libc [1] defines (struct timeval).tv_sec as a 'long long' for arm and other architectures. The default build having a '-Wformat' flag, not casting the field when printing prevents from building perf. This patch casts the (struct timeval).tv_sec fields to the expected format. [1] git://git.musl-libc.org/musl Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Douglas.raillard@arm.com Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210224182410.5366-1-Pierre.Gondois@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06tools headers UAPI: Sync kvm.h headers with the kernel sourcesArnaldo Carvalho de Melo1-0/+73
To pick the changes in: d9a47edabc4f9481 ("KVM: PPC: Book3S HV: Introduce new capability for 2nd DAWR") 8d4e7e80838f45d3 ("KVM: x86: declare Xen HVM shared info capability and add test case") 40da8ccd724f7ca2 ("KVM: x86/xen: Add event channel interrupt vector upcall") These new IOCTLs are now supported on 'perf trace': $ tools/perf/trace/beauty/kvm_ioctl.sh > before $ cp include/uapi/linux/kvm.h tools/include/uapi/linux/kvm.h $ tools/perf/trace/beauty/kvm_ioctl.sh > after $ diff -u before after --- before 2021-02-23 09:55:46.229058308 -0300 +++ after 2021-02-23 09:55:57.509308058 -0300 @@ -91,6 +91,10 @@ [0xc1] = "GET_SUPPORTED_HV_CPUID", [0xc6] = "X86_SET_MSR_FILTER", [0xc7] = "RESET_DIRTY_RINGS", + [0xc8] = "XEN_HVM_GET_ATTR", + [0xc9] = "XEN_HVM_SET_ATTR", + [0xca] = "XEN_VCPU_GET_ATTR", + [0xcb] = "XEN_VCPU_SET_ATTR", [0xe0] = "CREATE_DEVICE", [0xe1] = "SET_DEVICE_ATTR", [0xe2] = "GET_DEVICE_ATTR", $ Addressing this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h' diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06tools headers UAPI s390: Sync ptrace.h kernel headersArnaldo Carvalho de Melo1-2/+3
To pick up the changes from: 56e62a7370283601 ("s390: convert to generic entry") That only adds two new defines, so shouldn't cause problems when building the BPF selftests. Silencing this perf build warning: Warning: Kernel ABI header at 'tools/arch/s390/include/uapi/asm/ptrace.h' differs from latest version at 'arch/s390/include/uapi/asm/ptrace.h' diff -u tools/arch/s390/include/uapi/asm/ptrace.h arch/s390/include/uapi/asm/ptrace.h Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06perf arch powerpc: Sync powerpc syscall.tbl with the kernel sourcesArnaldo Carvalho de Melo1-15/+5
To get the changes in: fbcee2ebe8edbb6a ("powerpc/32: Always save non volatile GPRs at syscall entry") That shouldn't cause any change in tooling, just silences the following tools/perf/ build warning: Warning: Kernel ABI header at 'tools/perf/arch/powerpc/entry/syscalls/syscall.tbl' differs from latest version at 'arch/powerpc/kernel/syscalls/syscall.tbl' Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06tools headers UAPI: Sync openat2.h with the kernel sourcesArnaldo Carvalho de Melo1-0/+4
To pick the changes in: 99668f618062816c ("fs: expose LOOKUP_CACHED through openat2() RESOLVE_CACHED") That don't result in any change in tooling, only silences this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/openat2.h' differs from latest version at 'include/uapi/linux/openat2.h' diff -u tools/include/uapi/linux/openat2.h include/uapi/linux/openat2.h Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>