| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Test basic (port-default, VLAN PCP and IP DSCP) QoS classification for
Ocelot switches. Advanced QoS classification using tc filters is covered
by tc_flower_chains.sh in the same directory.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220502155424.4098917-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Check userspace PM behavior to ensure ADD_ADDR echoes are only sent when
there is an active userspace daemon. If the daemon is restarting or
hasn't loaded yet, the missing echo will cause the peer to retransmit
the ADD_ADDR - and hopefully the daemon will be ready to receive it at
that later time.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a test that sends 1Gbps of traffic through the switch, into which it
then injects a burst of traffic and tests that there are no drops.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add two helpers, start_traffic_pktsize() and start_tcp_traffic_pktsize(),
that allow explicit overriding of packet size. Change start_traffic() and
start_tcp_traffic() to dispatch through these helpers with the default
packet size.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: David Ahern <dsahern@kernel.org>
Cc: Simon Horman <horms@verge.net.au>
Cc: Julian Anastasov <ja@ssi.bg>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Jozsef Kadlecsik <kadlec@netfilter.org>
Cc: Florian Westphal <fw@strlen.de>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Lorenz Bauer <lmb@cloudflare.com>
Cc: Akhmat Karakotov <hmukos@yandex-team.ru>
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The Felix VSC9959 switch in NXP LS1028A supports the tc-gate action
which enforced time-based access control per stream. A stream as seen by
this switch is identified by {MAC DA, VID}.
We use the standard forwarding selftest topology with 2 host interfaces
and 2 switch interfaces. The host ports must require timestamping non-IP
packets and supporting tc-etf offload, for isochron to work. The
isochron program monitors network sync status (ptp4l, phc2sys) and
deterministically transmits packets to the switch such that the tc-gate
action either (a) always accepts them based on its schedule, or
(b) always drops them.
I tried to keep as much of the logic that isn't specific to the NXP
LS1028A in a new tsn_lib.sh, for future reuse. This covers
synchronization using ptp4l and phc2sys, and isochron.
The cycle-time chosen for this selftest isn't particularly impressive
(and the focus is the functionality of the switch), but I didn't really
know what to do better, considering that it will mostly be run during
debugging sessions, various kernel bloatware would be enabled, like
lockdep, KASAN, etc, and we certainly can't run any races with those on.
I tried to look through the kselftest framework for other real time
applications and didn't really find any, so I'm not sure how better to
prepare the environment in case we want to go for a lower cycle time.
At the moment, the only thing the selftest is ensuring is that dynamic
frequency scaling is disabled on the CPU that isochron runs on. It would
probably be useful to have a blacklist of kernel config options (checked
through zcat /proc/config.gz) and some cyclictest scripts to run
beforehand, but I saw none of those.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://lore.kernel.org/r/20220501112953.3298973-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a boilerplate test loop to run all tests in
vrf_strict_mode_test.sh. Add a -t flag that allows a selected test to
run. Remove the vrf_strict_mode_tests function which is now unused.
Signed-off-by: Jaehee Park <jhpark1013@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220429164658.GA656707@jaehee-ThinkPad-X1-Extreme
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
These tests ensure that the in-kernel path manager is bypassed when
the userspace path manager is configured. Kernel code is still
responsible for ADD_ADDR echo, so also make sure that's working.
Tested-by: Geliang Tang <geliang.tang@suse.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Adding a new socket option, SO_RCVMARK, to indicate that SO_MARK
should be included in the ancillary data returned by recvmsg().
Renamed the sock_recv_ts_and_drops() function to sock_recv_cmsgs().
Signed-off-by: Erin MacNeil <lnx.erin@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20220427200259.2564-1-lnx.erin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
include/linux/netdevice.h
net/core/dev.c
6510ea973d8d ("net: Use this_cpu_inc() to increment net->core_stats")
794c24e9921f ("net-core: rx_otherhost_dropped to core_stats")
https://lore.kernel.org/all/20220428111903.5f4304e0@canb.auug.org.au/
drivers/net/wan/cosa.c
d48fea8401cf ("net: cosa: fix error check return value of register_chrdev()")
89fbca3307d4 ("net: wan: remove support for COSA and SRP synchronous serial boards")
https://lore.kernel.org/all/20220428112130.1f689e5e@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, bpf and netfilter.
Current release - new code bugs:
- bridge: switchdev: check br_vlan_group() return value
- use this_cpu_inc() to increment net->core_stats, fix preempt-rt
Previous releases - regressions:
- eth: stmmac: fix write to sgmii_adapter_base
Previous releases - always broken:
- netfilter: nf_conntrack_tcp: re-init for syn packets only,
resolving issues with TCP fastopen
- tcp: md5: fix incorrect tcp_header_len for incoming connections
- tcp: fix F-RTO may not work correctly when receiving DSACK
- tcp: ensure use of most recently sent skb when filling rate samples
- tcp: fix potential xmit stalls caused by TCP_NOTSENT_LOWAT
- virtio_net: fix wrong buf address calculation when using xdp
- xsk: fix forwarding when combining copy mode with busy poll
- xsk: fix possible crash when multiple sockets are created
- bpf: lwt: fix crash when using bpf_skb_set_tunnel_key() from
bpf_xmit lwt hook
- sctp: null-check asoc strreset_chunk in sctp_generate_reconf_event
- wireguard: device: check for metadata_dst with skb_valid_dst()
- netfilter: update ip6_route_me_harder to consider L3 domain
- gre: make o_seqno start from 0 in native mode
- gre: switch o_seqno to atomic to prevent races in collect_md mode
Misc:
- add Eric Dumazet to networking maintainers
- dt: dsa: realtek: remove realtek,rtl8367s string
- netfilter: flowtable: Remove the empty file"
* tag 'net-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
tcp: fix F-RTO may not work correctly when receiving DSACK
Revert "ibmvnic: Add ethtool private flag for driver-defined queue limits"
net: enetc: allow tc-etf offload even with NETIF_F_CSUM_MASK
ixgbe: ensure IPsec VF<->PF compatibility
MAINTAINERS: Update BNXT entry with firmware files
netfilter: nft_socket: only do sk lookups when indev is available
net: fec: add missing of_node_put() in fec_enet_init_stop_mode()
bnx2x: fix napi API usage sequence
tls: Skip tls_append_frag on zero copy size
Add Eric Dumazet to networking maintainers
netfilter: conntrack: fix udp offload timeout sysctl
netfilter: nf_conntrack_tcp: re-init for syn packets only
net: dsa: lantiq_gswip: Don't set GSWIP_MII_CFG_RMII_CLK
net: Use this_cpu_inc() to increment net->core_stats
Bluetooth: hci_sync: Cleanup hci_conn if it cannot be aborted
Bluetooth: hci_event: Fix creating hci_conn object on error status
Bluetooth: hci_event: Fix checking for invalid handle on error status
ice: fix use-after-free when deinitializing mailbox snapshot
ice: wait 5 s for EMP reset after firmware flash
ice: Protect vf_state check by cfg_lock in ice_vc_process_vf_msg()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Highlights:
- asus-wmi bug-fixes
- intel-sdsu bug-fixes
- build (warning) fixes
- couple of hw-id additions"
* tag 'platform-drivers-x86-v5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/intel: pmc/core: change pmc_lpm_modes to static
platform/x86/intel/sdsi: Fix bug in multi packet reads
platform/x86/intel/sdsi: Poll on ready bit for writes
platform/x86/intel/sdsi: Handle leaky bucket
platform/x86: intel-uncore-freq: Prevent driver loading in guests
platform/x86: gigabyte-wmi: added support for B660 GAMING X DDR4 motherboard
platform/x86: dell-laptop: Add quirk entry for Latitude 7520
platform/x86: asus-wmi: Fix driver not binding when fan curve control probe fails
platform/x86: asus-wmi: Potential buffer overflow in asus_wmi_evaluate_method_buf()
tools/power/x86/intel-speed-select: fix build failure when using -Wl,--as-needed
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-04-27
We've added 85 non-merge commits during the last 18 day(s) which contain
a total of 163 files changed, 4499 insertions(+), 1521 deletions(-).
The main changes are:
1) Teach libbpf to enhance BPF verifier log with human-readable and relevant
information about failed CO-RE relocations, from Andrii Nakryiko.
2) Add typed pointer support in BPF maps and enable it for unreferenced pointers
(via probe read) and referenced ones that can be passed to in-kernel helpers,
from Kumar Kartikeya Dwivedi.
3) Improve xsk to break NAPI loop when rx queue gets full to allow for forward
progress to consume descriptors, from Maciej Fijalkowski & Björn Töpel.
4) Fix a small RCU read-side race in BPF_PROG_RUN routines which dereferenced
the effective prog array before the rcu_read_lock, from Stanislav Fomichev.
5) Implement BPF atomic operations for RV64 JIT, and add libbpf parsing logic
for USDT arguments under riscv{32,64}, from Pu Lehui.
6) Implement libbpf parsing of USDT arguments under aarch64, from Alan Maguire.
7) Enable bpftool build for musl and remove nftw with FTW_ACTIONRETVAL usage
so it can be shipped under Alpine which is musl-based, from Dominique Martinet.
8) Clean up {sk,task,inode} local storage trace RCU handling as they do not
need to use call_rcu_tasks_trace() barrier, from KP Singh.
9) Improve libbpf API documentation and fix error return handling of various
API functions, from Grant Seltzer.
10) Enlarge offset check for bpf_skb_{load,store}_bytes() helpers given data
length of frags + frag_list may surpass old offset limit, from Liu Jian.
11) Various improvements to prog_tests in area of logging, test execution
and by-name subtest selection, from Mykola Lysenko.
12) Simplify map_btf_id generation for all map types by moving this process
to build time with help of resolve_btfids infra, from Menglong Dong.
13) Fix a libbpf bug in probing when falling back to legacy bpf_probe_read*()
helpers; the probing caused always to use old helpers, from Runqing Yang.
14) Add support for ARCompact and ARCv2 platforms for libbpf's PT_REGS
tracing macros, from Vladimir Isaev.
15) Cleanup BPF selftests to remove old & unneeded rlimit code given kernel
switched to memcg-based memory accouting a while ago, from Yafang Shao.
16) Refactor of BPF sysctl handlers to move them to BPF core, from Yan Zhu.
17) Fix BPF selftests in two occasions to work around regressions caused by latest
LLVM to unblock CI until their fixes are worked out, from Yonghong Song.
18) Misc cleanups all over the place, from various others.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (85 commits)
selftests/bpf: Add libbpf's log fixup logic selftests
libbpf: Fix up verifier log for unguarded failed CO-RE relos
libbpf: Simplify bpf_core_parse_spec() signature
libbpf: Refactor CO-RE relo human description formatting routine
libbpf: Record subprog-resolved CO-RE relocations unconditionally
selftests/bpf: Add CO-RE relos and SEC("?...") to linked_funcs selftests
libbpf: Avoid joining .BTF.ext data with BPF programs by section name
libbpf: Fix logic for finding matching program for CO-RE relocation
libbpf: Drop unhelpful "program too large" guess
libbpf: Fix anonymous type check in CO-RE logic
bpf: Compute map_btf_id during build time
selftests/bpf: Add test for strict BTF type check
selftests/bpf: Add verifier tests for kptr
selftests/bpf: Add C tests for kptr
libbpf: Add kptr type tag macros to bpf_helpers.h
bpf: Make BTF type match stricter for release arguments
bpf: Teach verifier about kptr_get kfunc helpers
bpf: Wire up freeing of referenced kptr
bpf: Populate pairs of btf_id and destructor kfunc in btf
bpf: Adapt copy_map_value for multiple offset case
...
====================
Link: https://lore.kernel.org/r/20220427224758.20976-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the multiple checksum errors occur in chk_csum_nr(), print the
numbers of the errors as an extra message.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch extends chk_fail_nr to check the MP_FAIL response mibs.
Add a new argument invert for chk_fail_nr to allow it can check the
MP_FAIL TX and RX mibs from the opposite direction.
When the infinite map is received before the MP_FAIL response, the
response will be lost. A '-' can be added into fail_tx or fail_rx to
represent that MP_FAIL response TX or RX can be lost when doing the
checks.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the single subflow test case for MP_FAIL, to test the infinite
mapping case. Use the test_linkfail value to make 128KB test files.
Add a new function reset_with_fail(), in it use 'iptables' and 'tc
action pedit' rules to produce the bit flips to trigger the checksum
failures. Set validate_checksum to enable checksums for the MP_FAIL
tests without passing the '-C' argument. Set check_invert flag to
enable the invert bytes check for the output data in check_transfer().
Instead of the file mismatch error, this test prints out the inverted
bytes.
Add a new function pedit_action_pkts() to get the numbers of the packets
edited by the tc pedit actions. Print this numbers to the output.
Also add the needed kernel configures in the selftests config file.
Suggested-by: Davide Caratti <dcaratti@redhat.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add tests validating that libbpf is indeed patching up BPF verifier log
with CO-RE relocation details. Also test partial and full truncation
scenarios.
This test might be a bit fragile due to changing BPF verifier log
format. If that proves to be frequently breaking, we can simplify tests
or remove the truncation subtests. But for now it seems useful to test
it in those conditions that are otherwise rarely occuring in practice.
Also test CO-RE relo failure in a subprog as that excercises subprogram CO-RE
relocation mapping logic which doesn't work out of the box without extra
relo storage previously done only for gen_loader case.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-11-andrii@kernel.org
|
|
Teach libbpf to post-process BPF verifier log on BPF program load
failure and detect known error patterns to provide user with more
context.
Currently there is one such common situation: an "unguarded" failed BPF
CO-RE relocation. While failing CO-RE relocation is expected, it is
expected to be property guarded in BPF code such that BPF verifier
always eliminates BPF instructions corresponding to such failed CO-RE
relos as dead code. In cases when user failed to take such precautions,
BPF verifier provides the best log it can:
123: (85) call unknown#195896080
invalid func unknown#195896080
Such incomprehensible log error is due to libbpf "poisoning" BPF
instruction that corresponds to failed CO-RE relocation by replacing it
with invalid `call 0xbad2310` instruction (195896080 == 0xbad2310 reads
"bad relo" if you squint hard enough).
Luckily, libbpf has all the necessary information to look up CO-RE
relocation that failed and provide more human-readable description of
what's going on:
5: <invalid CO-RE relocation>
failed to resolve CO-RE relocation <byte_off> [6] struct task_struct___bad.fake_field_subprog (0:2 @ offset 8)
This hopefully makes it much easier to understand what's wrong with
user's BPF program without googling magic constants.
This BPF verifier log fixup is setup to be extensible and is going to be
used for at least one other upcoming feature of libbpf in follow up patches.
Libbpf is parsing lines of BPF verifier log starting from the very end.
Currently it processes up to 10 lines of code looking for familiar
patterns. This avoids wasting lots of CPU processing huge verifier logs
(especially for log_level=2 verbosity level). Actual verification error
should normally be found in last few lines, so this should work
reliably.
If libbpf needs to expand log beyond available log_buf_size, it
truncates the end of the verifier log. Given verifier log normally ends
with something like:
processed 2 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0
... truncating this on program load error isn't too bad (end user can
always increase log size, if it needs to get complete log).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-10-andrii@kernel.org
|
|
Simplify bpf_core_parse_spec() signature to take struct bpf_core_relo as
an input instead of requiring callers to decompose them into type_id,
relo, spec_str, etc. This makes using and reusing this helper easier.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-9-andrii@kernel.org
|
|
Refactor how CO-RE relocation is formatted. Now it dumps human-readable
representation, currently used by libbpf in either debug or error
message output during CO-RE relocation resolution process, into provided
buffer. This approach allows for better reuse of this functionality
outside of CO-RE relocation resolution, which we'll use in next patch
for providing better error message for BPF verifier rejecting BPF
program due to unguarded failed CO-RE relocation.
It also gets rid of annoying "stitching" of libbpf_print() calls, which
was the only place where we did this.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-8-andrii@kernel.org
|
|
Previously, libbpf recorded CO-RE relocations with insns_idx resolved
according to finalized subprog locations (which are appended at the end
of entry BPF program) to simplify the job of light skeleton generator.
This is necessary because once subprogs' instructions are appended to
main entry BPF program all the subprog instruction indices are shifted
and that shift is different for each entry (main) BPF program, so it's
generally impossible to map final absolute insn_idx of the finalized BPF
program to their original locations inside subprograms.
This information is now going to be used not only during light skeleton
generation, but also to map absolute instruction index to subprog's
instruction and its corresponding CO-RE relocation. So start recording
these relocations always, not just when obj->gen_loader is set.
This information is going to be freed at the end of bpf_object__load()
step, as before (but this can change in the future if there will be
a need for this information post load step).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-7-andrii@kernel.org
|
|
Enhance linked_funcs selftest with two tricky features that might not
obviously work correctly together. We add CO-RE relocations to entry BPF
programs and mark those programs as non-autoloadable with SEC("?...")
annotation. This makes sure that libbpf itself handles .BTF.ext CO-RE
relocation data matching correctly for SEC("?...") programs, as well as
ensures that BPF static linker handles this correctly (this was the case
before, no changes are necessary, but it wasn't explicitly tested).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-6-andrii@kernel.org
|
|
Instead of using ELF section names as a joining key between .BTF.ext and
corresponding BPF programs, pre-build .BTF.ext section number to ELF
section index mapping during bpf_object__open() and use it later for
matching .BTF.ext information (func/line info or CO-RE relocations) to
their respective BPF programs and subprograms.
This simplifies corresponding joining logic and let's libbpf do
manipulations with BPF program's ELF sections like dropping leading '?'
character for non-autoloaded programs. Original joining logic in
bpf_object__relocate_core() (see relevant comment that's now removed)
was never elegant, so it's a good improvement regardless. But it also
avoids unnecessary internal assumptions about preserving original ELF
section name as BPF program's section name (which was broken when
SEC("?abc") support was added).
Fixes: a3820c481112 ("libbpf: Support opting out from autoloading BPF programs declaratively")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-5-andrii@kernel.org
|
|
Fix the bug in bpf_object__relocate_core() which can lead to finding
invalid matching BPF program when processing CO-RE relocation. IF
matching program is not found, last encountered program will be assumed
to be correct program and thus error detection won't detect the problem.
Fixes: 9c82a63cf370 ("libbpf: Fix CO-RE relocs against .text section")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-4-andrii@kernel.org
|
|
libbpf pretends it knows actual limit of BPF program instructions based
on UAPI headers it compiled with. There is neither any guarantee that
UAPI headers match host kernel, nor BPF verifier actually uses
BPF_MAXINSNS constant anymore. Just drop unhelpful "guess", BPF verifier
will emit actual reason for failure in its logs anyways.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-3-andrii@kernel.org
|
|
Use type name for checking whether CO-RE relocation is referring to
anonymous type. Using spec string makes no sense.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-2-andrii@kernel.org
|
|
Ensure that the edge case where first member type was matched
successfully even if it didn't match BTF type of register is caught and
rejected by the verifier.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220424214901.2743946-14-memxor@gmail.com
|
|
Reuse bpf_prog_test functions to test the support for PTR_TO_BTF_ID in
BPF map case, including some tests that verify implementation sanity and
corner cases.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220424214901.2743946-13-memxor@gmail.com
|
|
This uses the __kptr and __kptr_ref macros as well, and tries to test
the stuff that is supposed to work, since we have negative tests in
test_verifier suite. Also include some code to test map-in-map support,
such that the inner_map_meta matches the kptr_off_tab of map added as
element.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220424214901.2743946-12-memxor@gmail.com
|
|
Include convenience definitions:
__kptr: Unreferenced kptr
__kptr_ref: Referenced kptr
Users can use them to tag the pointer type meant to be used with the new
support directly in the map value definition.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220424214901.2743946-11-memxor@gmail.com
|
|
Extending the code in previous commits, introduce referenced kptr
support, which needs to be tagged using 'kptr_ref' tag instead. Unlike
unreferenced kptr, referenced kptr have a lot more restrictions. In
addition to the type matching, only a newly introduced bpf_kptr_xchg
helper is allowed to modify the map value at that offset. This transfers
the referenced pointer being stored into the map, releasing the
references state for the program, and returning the old value and
creating new reference state for the returned pointer.
Similar to unreferenced pointer case, return value for this case will
also be PTR_TO_BTF_ID_OR_NULL. The reference for the returned pointer
must either be eventually released by calling the corresponding release
function, otherwise it must be transferred into another map.
It is also allowed to call bpf_kptr_xchg with a NULL pointer, to clear
the value, and obtain the old value if any.
BPF_LDX, BPF_STX, and BPF_ST cannot access referenced kptr. A future
commit will permit using BPF_LDX for such pointers, but attempt at
making it safe, since the lifetime of object won't be guaranteed.
There are valid reasons to enforce the restriction of permitting only
bpf_kptr_xchg to operate on referenced kptr. The pointer value must be
consistent in face of concurrent modification, and any prior values
contained in the map must also be released before a new one is moved
into the map. To ensure proper transfer of this ownership, bpf_kptr_xchg
returns the old value, which the verifier would require the user to
either free or move into another map, and releases the reference held
for the pointer being moved in.
In the future, direct BPF_XCHG instruction may also be permitted to work
like bpf_kptr_xchg helper.
Note that process_kptr_func doesn't have to call
check_helper_mem_access, since we already disallow rdonly/wronly flags
for map, which is what check_map_access_type checks, and we already
ensure the PTR_TO_MAP_VALUE refers to kptr by obtaining its off_desc,
so check_map_access is also not required.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220424214901.2743946-4-memxor@gmail.com
|
|
Add a new type flag for bpf_arg_type that when set tells verifier that
for a release function, that argument's register will be the one for
which meta.ref_obj_id will be set, and which will then be released
using release_reference. To capture the regno, introduce a new field
release_regno in bpf_call_arg_meta.
This would be required in the next patch, where we may either pass NULL
or a refcounted pointer as an argument to the release function
bpf_kptr_xchg. Just releasing only when meta.ref_obj_id is set is not
enough, as there is a case where the type of argument needed matches,
but the ref_obj_id is set to 0. Hence, we must enforce that whenever
meta.ref_obj_id is zero, the register that is to be released can only
be NULL for a release function.
Since we now indicate whether an argument is to be released in
bpf_func_proto itself, is_release_function helper has lost its utitlity,
hence refactor code to work without it, and just rely on
meta.release_regno to know when to release state for a ref_obj_id.
Still, the restriction of one release argument and only one ref_obj_id
passed to BPF helper or kfunc remains. This may be lifted in the future.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220424214901.2743946-3-memxor@gmail.com
|
|
musl does not like including sys/fcntl.h directly:
[...]
1 | #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h>
[...]
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220424051022.2619648-5-asmadeus@codewreck.org
|
|
musl nftw implementation does not support FTW_ACTIONRETVAL. There have been
multiple attempts at pushing the feature in musl upstream, but it has been
refused or ignored all the times:
https://www.openwall.com/lists/musl/2021/03/26/1
https://www.openwall.com/lists/musl/2022/01/22/1
In this case we only care about /proc/<pid>/fd/<fd>, so it's not too difficult
to reimplement directly instead, and the new implementation makes 'bpftool perf'
slightly faster because it doesn't needlessly stat/readdir unneeded directories
(54ms -> 13ms on my machine).
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220424051022.2619648-4-asmadeus@codewreck.org
|
|
The link variable is already of type 'struct bpf_link *', casting it to
'struct bpf_link *' is redundant, drop it.
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220424143420.457082-1-ytcoode@gmail.com
|
|
Once line card is activated, check the device FW version is exposed.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Once line card is provisioned, check if HW revision and INI version
are exposed.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Once line card is provisioned, check the count of devices on it and
print them out.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix header include for LLVM >= 14 when building with libclang.
- Allow access to 'data_src' for auxtrace in 'perf script' with ARM SPE
perf.data files, fixing processing data with such attributes.
- Fix error message for test case 71 ("Convert perf time to TSC") on
s390, where it is not supported.
* tag 'perf-tools-fixes-for-v5.18-2022-04-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf test: Fix error message for test case 71 on s390, where it is not supported
perf report: Set PERF_SAMPLE_DATA_SRC bit for Arm SPE event
perf script: Always allow field 'data_src' for auxtrace
perf clang: Fix header include for LLVM >= 14
|
|
This adds an initial subset of forwarding selftests which I considered
to be relevant for DSA drivers, along with a forwarding.config that
makes it easier to run them (disables veth pair creation, makes sure MAC
addresses are unique and stable).
The intention is to request driver writers to run these selftests during
review and make sure that the tests pass, or at least that the problems
are known.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This tests the capability of switch ports to filter out undesired
traffic. Different drivers are expected to have different capabilities
here (so some may fail and some may pass), yet the test still has some
value, for example to check for regressions.
There are 2 kinds of failures, one is when a packet which should have
been accepted isn't (and that should be fixed), and the other "failure"
(as reported by the test) is when a packet could have been filtered out
(for being unnecessary) yet it was received.
The bridge driver fares particularly badly at this test:
TEST: br0: Unicast IPv4 to primary MAC address [ OK ]
TEST: br0: Unicast IPv4 to macvlan MAC address [ OK ]
TEST: br0: Unicast IPv4 to unknown MAC address [FAIL]
reception succeeded, but should have failed
TEST: br0: Unicast IPv4 to unknown MAC address, promisc [ OK ]
TEST: br0: Unicast IPv4 to unknown MAC address, allmulti [FAIL]
reception succeeded, but should have failed
TEST: br0: Multicast IPv4 to joined group [ OK ]
TEST: br0: Multicast IPv4 to unknown group [FAIL]
reception succeeded, but should have failed
TEST: br0: Multicast IPv4 to unknown group, promisc [ OK ]
TEST: br0: Multicast IPv4 to unknown group, allmulti [ OK ]
TEST: br0: Multicast IPv6 to joined group [ OK ]
TEST: br0: Multicast IPv6 to unknown group [FAIL]
reception succeeded, but should have failed
TEST: br0: Multicast IPv6 to unknown group, promisc [ OK ]
TEST: br0: Multicast IPv6 to unknown group, allmulti [ OK ]
mainly because it does not implement IFF_UNICAST_FLT. Yet I still think
having the test (with the failures) is useful in case somebody wants to
tackle that problem in the future, to make an easy before-and-after
comparison.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Bombard a standalone switch port with various kinds of traffic to ensure
it is really standalone and doesn't leak packets to other switch ports.
Also check for switch ports in different bridges, and switch ports in a
VLAN-aware bridge but having different pvids. No forwarding should take
place in either case.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
interface
Pinging an IPv6 link-local multicast address selects the link-local
unicast address of the interface as source, and we'd like to monitor for
that in tcpdump.
Add a helper to the forwarding library which retrieves the link-local
IPv6 address of an interface, to make that task easier.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extend the forwarding library with calls to some small C programs which
join an IP multicast group and send some packets to it. Both IPv4 and
IPv6 groups are supported. Use cases range from testing IGMP/MLD
snooping, to RX filtering, to multicast routing.
Testing multicast traffic using msend/mreceive is intended to be done
using tcpdump.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extend tcpdump_start() & C:o to handle multiple instances. Useful when
observing bridge operation, e.g., unicast learning/flooding, and any
case of multicast distribution (to these ports but not that one ...).
This means the interface argument is now a mandatory argument to all
tcpdump_*() functions, hence the changes to the ocelot flower test.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For some use-cases we may want to change the tcpdump flags used in
tcpdump_start(). For instance, observing interfaces without the PROMISC
flag, e.g. to see what's really being forwarded to the bridge interface.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
By default, DSA switch ports inherit their MAC address from the DSA
master.
This works well for practical situations, but some selftests like
bridge_vlan_unaware.sh loop back 2 standalone DSA ports with 2 bridged
DSA ports, and require the bridge to forward packets between the
standalone ports.
Due to the bridge seeing that the MAC DA it needs to forward is present
as a local FDB entry (it coincides with the MAC address of the bridge
ports), the test packets are not forwarded, but terminated locally on
br0. In turn, this makes the ping and ping6 tests fail.
Address this by introducing an option to have stable MAC addresses.
When mac_addr_prepare is called, the current addresses of the netifs are
saved and replaced with 00:01:02:03:04:${netif number}. Then when
mac_addr_restore is called at the end of the test, the original MAC
addresses are restored. This ensures that the MAC addresses are unique,
which makes the test pass even for DSA ports.
The usage model is for the behavior to be opt-in via STABLE_MAC_ADDRS,
which DSA should set to true, all others behave as before. By hooking
the calls to mac_addr_prepare and mac_addr_restore within the forwarding
lib itself, we do not need to patch each individual selftest, the only
requirement is that pre_cleanup is called.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds a function chk_infi_nr() to check the mibs for the
infinite mapping. Invoke it in chk_join_nr() when validate_checksum
is set.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull kvm fixes from Paolo Bonzini:
"The main and larger change here is a workaround for AMD's lack of
cache coherency for encrypted-memory guests.
I have another patch pending, but it's waiting for review from the
architecture maintainers.
RISC-V:
- Remove 's' & 'u' as valid ISA extension
- Do not allow disabling the base extensions 'i'/'m'/'a'/'c'
x86:
- Fix NMI watchdog in guests on AMD
- Fix for SEV cache incoherency issues
- Don't re-acquire SRCU lock in complete_emulated_io()
- Avoid NULL pointer deref if VM creation fails
- Fix race conditions between APICv disabling and vCPU creation
- Bugfixes for disabling of APICv
- Preserve BSP MSR_KVM_POLL_CONTROL across suspend/resume
selftests:
- Do not use bitfields larger than 32-bits, they differ between GCC
and clang"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: selftests: introduce and use more page size-related constants
kvm: selftests: do not use bitfields larger than 32-bits for PTEs
KVM: SEV: add cache flush to solve SEV cache incoherency issues
KVM: SVM: Flush when freeing encrypted pages even on SME_COHERENT CPUs
KVM: SVM: Simplify and harden helper to flush SEV guest page(s)
KVM: selftests: Silence compiler warning in the kvm_page_table_test
KVM: x86/pmu: Update AMD PMC sample period to fix guest NMI-watchdog
x86/kvm: Preserve BSP MSR_KVM_POLL_CONTROL across suspend/resume
KVM: SPDX style and spelling fixes
KVM: x86: Skip KVM_GUESTDBG_BLOCKIRQ APICv update if APICv is disabled
KVM: x86: Pend KVM_REQ_APICV_UPDATE during vCPU creation to fix a race
KVM: nVMX: Defer APICv updates while L2 is active until L1 is active
KVM: x86: Tag APICv DISABLE inhibit, not ABSENT, if APICv is disabled
KVM: Initialize debugfs_dentry when a VM is created to avoid NULL deref
KVM: Add helpers to wrap vcpu->srcu_idx and yell if it's abused
KVM: RISC-V: Use kvm_vcpu.srcu_idx, drop RISC-V's unnecessary copy
KVM: x86: Don't re-acquire SRCU lock in complete_emulated_io()
RISC-V: KVM: Restrict the extensions that can be disabled
RISC-V: KVM: Remove 's' & 'u' as valid ISA extension
|
|
It turns out that by having CONFIG_ACPI=n, we've been failing to boot
additional CPUs, and so these systems were functionally UP. The code
bloat is unfortunate for build times, but I don't see an alternative. So
this commit sets CONFIG_ACPI=y for x86_64 and i686 configs.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
