summaryrefslogtreecommitdiffstats
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2020-11-30selftests/bpf: Fix flavored variants of test_imaKP Singh1-0/+1
Flavored variants of test_progs (e.g. test_progs-no_alu32) change their working directory to the corresponding subdirectory (e.g. no_alu32). Since the setup script required by test_ima (ima_setup.sh) is not mentioned in the dependencies, it does not get copied to these subdirectories and causes flavored variants of test_ima to fail. Adding the script to TRUNNER_EXTRA_FILES ensures that the file is also copied to the subdirectories for the flavored variants of test_progs. Fixes: 34b82d3ac105 ("bpf: Add a selftest for bpf_ima_inode_hash") Reported-by: Yonghong Song <yhs@fb.com> Suggested-by: Yonghong Song <yhs@fb.com> Signed-off-by: KP Singh <kpsingh@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20201126184946.1708213-1-kpsingh@chromium.org
2020-11-27libbpf: Replace size_t with __u32 in xsk interfacesMagnus Karlsson1-9/+6
Replace size_t with __u32 in the xsk interfaces that contain this. There is no reason to have size_t since the internal variable that is manipulated is a __u32. The following APIs are affected: __u32 xsk_ring_prod__reserve(struct xsk_ring_prod *prod, __u32 nb, __u32 *idx) void xsk_ring_prod__submit(struct xsk_ring_prod *prod, __u32 nb) __u32 xsk_ring_cons__peek(struct xsk_ring_cons *cons, __u32 nb, __u32 *idx) void xsk_ring_cons__cancel(struct xsk_ring_cons *cons, __u32 nb) void xsk_ring_cons__release(struct xsk_ring_cons *cons, __u32 nb) The "nb" variable and the return values have been changed from size_t to __u32. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/1606383455-8243-1-git-send-email-magnus.karlsson@gmail.com
2020-11-26bpf: Fix selftest compilation on clang 11Andrei Matei1-0/+2
Before this patch, profiler.inc.h wouldn't compile with clang-11 (before the __builtin_preserve_enum_value LLVM builtin was introduced in https://reviews.llvm.org/D83242). Another test that uses this builtin (test_core_enumval) is conditionally skipped if the compiler is too old. In that spirit, this patch inhibits part of populate_cgroup_info(), which needs this CO-RE builtin. The selftests build again on clang-11. The affected test (the profiler test) doesn't pass on clang-11 because it's missing https://reviews.llvm.org/D85570, but at least the test suite as a whole compiles. The test's expected failure is already called out in the README. Signed-off-by: Andrei Matei <andreimatei1@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Florian Lehner <dev@der-flo.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20201125035255.17970-1-andreimatei1@gmail.com
2020-11-26bpf: Add a selftest for bpf_ima_inode_hashKP Singh4-0/+186
The test does the following: - Mounts a loopback filesystem and appends the IMA policy to measure executions only on this file-system. Restricting the IMA policy to a particular filesystem prevents a system-wide IMA policy change. - Executes an executable copied to this loopback filesystem. - Calls the bpf_ima_inode_hash in the bprm_committed_creds hook and checks if the call succeeded and checks if a hash was calculated. The test shells out to the added ima_setup.sh script as the setup is better handled in a shell script and is more complicated to do in the test program or even shelling out individual commands from C. The list of required configs (i.e. IMA, SECURITYFS, IMA_{WRITE,READ}_POLICY) for running this test are also updated. Suggested-by: Mimi Zohar <zohar@linux.ibm.com> (limit policy rule to loopback mount) Signed-off-by: KP Singh <kpsingh@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20201124151210.1081188-4-kpsingh@chromium.org
2020-11-26bpf: Add a BPF helper for getting the IMA hash of an inodeKP Singh1-0/+11
Provide a wrapper function to get the IMA hash of an inode. This helper is useful in fingerprinting files (e.g executables on execution) and using these fingerprints in detections like an executable unlinking itself. Since the ima_inode_hash can sleep, it's only allowed for sleepable LSM hooks. Signed-off-by: KP Singh <kpsingh@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20201124151210.1081188-3-kpsingh@chromium.org
2020-11-25libbpf: Add support for canceling cached_cons advanceLi RongQing1-0/+6
Add a new function for returning descriptors the user received after an xsk_ring_cons__peek call. After the application has gotten a number of descriptors from a ring, it might not be able to or want to process them all for various reasons. Therefore, it would be useful to have an interface for returning or cancelling a number of them so that they are returned to the ring. This patch adds a new function called xsk_ring_cons__cancel that performs this operation on nb descriptors counted from the end of the batch of descriptors that was received through the peek call. Signed-off-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> [ Magnus Karlsson: rewrote changelog ] Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/1606202474-8119-1-git-send-email-lirongqing@baidu.com
2020-11-24selftest/bpf: Fix rst formatting in readmeAndrei Matei1-13/+15
A couple of places in the readme had invalid rst formatting causing the rendering to be off. This patch fixes them with minimal edits. Signed-off-by: Andrei Matei <andreimatei1@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20201122022205.57229-2-andreimatei1@gmail.com
2020-11-24selftest/bpf: Fix link in readmeAndrei Matei1-1/+4
The link was bad because of invalid rst; it was pointing to itself and was rendering badly. Signed-off-by: Andrei Matei <andreimatei1@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20201122022205.57229-1-andreimatei1@gmail.com
2020-11-20bpftool: Add {i,d}tlb_misses support for bpftool profileYonghong Song1-1/+29
Commit 47c09d6a9f67("bpftool: Introduce "prog profile" command") introduced "bpftool prog profile" command which can be used to profile bpf program with metrics like # of instructions, This patch added support for itlb_misses and dtlb_misses. During an internal bpf program performance evaluation, I found these two metrics are also very useful. The following is an example output: $ bpftool prog profile id 324 duration 3 cycles itlb_misses 1885029 run_cnt 5134686073 cycles 306893 itlb_misses $ bpftool prog profile id 324 duration 3 cycles dtlb_misses 1827382 run_cnt 4943593648 cycles 5975636 dtlb_misses $ bpftool prog profile id 324 duration 3 cycles llc_misses 1836527 run_cnt 5019612972 cycles 4161041 llc_misses From the above, we can see quite some dtlb misses, 3 dtlb misses perf prog run. This might be something worth further investigation. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20201119073039.4060095-1-yhs@fb.com
2020-11-18selftests/bpf: Mark tests that require unaligned memory accessBjörn Töpel7-18/+52
A lot of tests require unaligned memory access to work. Mark the tests as such, so that they can be avoided on unsupported architectures such as RISC-V. Signed-off-by: Björn Töpel <bjorn.topel@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Luke Nelson <luke.r.nels@gmail.com> Link: https://lore.kernel.org/bpf/20201118071640.83773-4-bjorn.topel@gmail.com
2020-11-18selftests/bpf: Avoid running unprivileged tests with alignment requirementsBjörn Töpel1-0/+13
Some architectures have strict alignment requirements. In that case, the BPF verifier detects if a program has unaligned accesses and rejects them. A user can pass BPF_F_ANY_ALIGNMENT to a program to override this check. That, however, will only work when a privileged user loads a program. An unprivileged user loading a program with this flag will be rejected prior entering the verifier. Hence, it does not make sense to load unprivileged programs without strict alignment when testing the verifier. This patch avoids exactly that. Signed-off-by: Björn Töpel <bjorn.topel@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Luke Nelson <luke.r.nels@gmail.com> Link: https://lore.kernel.org/bpf/20201118071640.83773-3-bjorn.topel@gmail.com
2020-11-18selftests/bpf: Fix broken riscv buildBjörn Töpel1-1/+2
The selftests/bpf Makefile includes system include directories from the host, when building BPF programs. On RISC-V glibc requires that __riscv_xlen is defined. This is not the case for "clang -target bpf", which messes up __WORDSIZE (errno.h -> ... -> wordsize.h) and breaks the build. By explicitly defining __risc_xlen correctly for riscv, we can workaround this. Fixes: 167381f3eac0 ("selftests/bpf: Makefile fix "missing" headers on build with -idirafter") Signed-off-by: Björn Töpel <bjorn.topel@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Luke Nelson <luke.r.nels@gmail.com> Link: https://lore.kernel.org/bpf/20201118071640.83773-2-bjorn.topel@gmail.com
2020-11-18bpf: Add bpf_ktime_get_coarse_ns helperDmitrii Banshchikov1-0/+11
The helper uses CLOCK_MONOTONIC_COARSE source of time that is less accurate but more performant. We have a BPF CGROUP_SKB firewall that supports event logging through bpf_perf_event_output(). Each event has a timestamp and currently we use bpf_ktime_get_ns() for it. Use of bpf_ktime_get_coarse_ns() saves ~15-20 ns in time required for event logging. bpf_ktime_get_ns(): EgressLogByRemoteEndpoint 113.82ns 8.79M bpf_ktime_get_coarse_ns(): EgressLogByRemoteEndpoint 95.40ns 10.48M Signed-off-by: Dmitrii Banshchikov <me@ubique.spb.ru> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20201117184549.257280-1-me@ubique.spb.ru
2020-11-18bpf: Add tests for bpf_bprm_opts_set helperKP Singh2-0/+150
The test forks a child process, updates the local storage to set/unset the securexec bit. The BPF program in the test attaches to bprm_creds_for_exec which checks the local storage of the current task to set the secureexec bit on the binary parameters (bprm). The child then execs a bash command with the environment variable TMPDIR set in the envp. The bash command returns a different exit code based on its observed value of the TMPDIR variable. Since TMPDIR is one of the variables that is ignored by the dynamic loader when the secureexec bit is set, one should expect the child execution to not see this value when the secureexec bit is set. Signed-off-by: KP Singh <kpsingh@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20201117232929.2156341-2-kpsingh@chromium.org
2020-11-18bpf: Add bpf_bprm_opts_set helperKP Singh1-0/+16
The helper allows modification of certain bits on the linux_binprm struct starting with the secureexec bit which can be updated using the BPF_F_BPRM_SECUREEXEC flag. secureexec can be set by the LSM for privilege gaining executions to set the AT_SECURE auxv for glibc. When set, the dynamic linker disables the use of certain environment variables (like LD_PRELOAD). Signed-off-by: KP Singh <kpsingh@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20201117232929.2156341-1-kpsingh@chromium.org
2020-11-16libbpf: bpf__find_by_name[_kind] should use btf__get_nr_types()Alan Maguire1-4/+4
When operating on split BTF, btf__find_by_name[_kind] will not iterate over all types since they use btf->nr_types to show the number of types to iterate over. For split BTF this is the number of types _on top of base BTF_, so it will underestimate the number of types to iterate over, especially for vmlinux + module BTF, where the latter is much smaller. Use btf__get_nr_types() instead. Fixes: ba451366bf44 ("libbpf: Implement basic split BTF support") Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/1605437195-2175-1-git-send-email-alan.maguire@oracle.com
2020-11-16selftest/bpf: Fix IPV6FR handling in flow dissectorSantucci Pierpaolo1-0/+2
From second fragment on, IPV6FR program must stop the dissection of IPV6 fragmented packet. This is the same approach used for IPV4 fragmentation. This fixes the flow keys calculation for the upper-layer protocols. Note that according to RFC8200, the first fragment packet must include the upper-layer header. Signed-off-by: Santucci Pierpaolo <santucci@epigenesys.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/X7JUzUj34ceE2wBm@santucci.pierpaolo
2020-11-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski50-892/+2402
Daniel Borkmann says: ==================== pull-request: bpf-next 2020-11-14 1) Add BTF generation for kernel modules and extend BTF infra in kernel e.g. support for split BTF loading and validation, from Andrii Nakryiko. 2) Support for pointers beyond pkt_end to recognize LLVM generated patterns on inlined branch conditions, from Alexei Starovoitov. 3) Implements bpf_local_storage for task_struct for BPF LSM, from KP Singh. 4) Enable FENTRY/FEXIT/RAW_TP tracing program to use the bpf_sk_storage infra, from Martin KaFai Lau. 5) Add XDP bulk APIs that introduce a defer/flush mechanism to optimize the XDP_REDIRECT path, from Lorenzo Bianconi. 6) Fix a potential (although rather theoretical) deadlock of hashtab in NMI context, from Song Liu. 7) Fixes for cross and out-of-tree build of bpftool and runqslower allowing build for different target archs on same source tree, from Jean-Philippe Brucker. 8) Fix error path in htab_map_alloc() triggered from syzbot, from Eric Dumazet. 9) Move functionality from test_tcpbpf_user into the test_progs framework so it can run in BPF CI, from Alexander Duyck. 10) Lift hashtab key_size limit to be larger than MAX_BPF_STACK, from Florian Lehner. Note that for the fix from Song we have seen a sparse report on context imbalance which requires changes in sparse itself for proper annotation detection where this is currently being discussed on linux-sparse among developers [0]. Once we have more clarification/guidance after their fix, Song will follow-up. [0] https://lore.kernel.org/linux-sparse/CAHk-=wh4bx8A8dHnX612MsDO13st6uzAz1mJ1PaHHVevJx_ZCw@mail.gmail.com/T/ https://lore.kernel.org/linux-sparse/20201109221345.uklbp3lzgq6g42zb@ltop.local/T/ * git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (66 commits) net: mlx5: Add xdp tx return bulking support net: mvpp2: Add xdp tx return bulking support net: mvneta: Add xdp tx return bulking support net: page_pool: Add bulk support for ptr_ring net: xdp: Introduce bulking for xdp tx return path bpf: Expose bpf_d_path helper to sleepable LSM hooks bpf: Augment the set of sleepable LSM hooks bpf: selftest: Use bpf_sk_storage in FENTRY/FEXIT/RAW_TP bpf: Allow using bpf_sk_storage in FENTRY/FEXIT/RAW_TP bpf: Rename some functions in bpf_sk_storage bpf: Folding omem_charge() into sk_storage_charge() selftests/bpf: Add asm tests for pkt vs pkt_end comparison. selftests/bpf: Add skb_pkt_end test bpf: Support for pointers beyond pkt_end. tools/bpf: Always run the *-clean recipes tools/bpf: Add bootstrap/ to .gitignore bpf: Fix NULL dereference in bpf_task_storage tools/bpftool: Fix build slowdown tools/runqslower: Build bpftool using HOSTCC tools/runqslower: Enable out-of-tree build ... ==================== Link: https://lore.kernel.org/r/20201114020819.29584-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12bpf: selftest: Use bpf_sk_storage in FENTRY/FEXIT/RAW_TPMartin KaFai Lau3-0/+259
This patch tests storing the task's related info into the bpf_sk_storage by fentry/fexit tracing at listen, accept, and connect. It also tests the raw_tp at inet_sock_set_state. A negative test is done by tracing the bpf_sk_storage_free() and using bpf_sk_storage_get() at the same time. It ensures this bpf program cannot load. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20201112211320.2587537-1-kafai@fb.com
2020-11-12Merge https://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski70-489/+3105
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-13selftests/bpf: Add asm tests for pkt vs pkt_end comparison.Alexei Starovoitov1-0/+42
Add few assembly tests for packet comparison. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Jiri Olsa <jolsa@redhat.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20201111031213.25109-4-alexei.starovoitov@gmail.com
2020-11-13selftests/bpf: Add skb_pkt_end testAlexei Starovoitov2-0/+95
Add a test that currently makes LLVM generate assembly code: $ llvm-objdump -S skb_pkt_end.o 0000000000000000 <main_prog>: ; if (skb_shorter(skb, ETH_IPV4_TCP_SIZE)) 0: 61 12 50 00 00 00 00 00 r2 = *(u32 *)(r1 + 80) 1: 61 14 4c 00 00 00 00 00 r4 = *(u32 *)(r1 + 76) 2: bf 43 00 00 00 00 00 00 r3 = r4 3: 07 03 00 00 36 00 00 00 r3 += 54 4: b7 01 00 00 00 00 00 00 r1 = 0 5: 2d 23 02 00 00 00 00 00 if r3 > r2 goto +2 <LBB0_2> 6: 07 04 00 00 0e 00 00 00 r4 += 14 ; if (skb_shorter(skb, ETH_IPV4_TCP_SIZE)) 7: bf 41 00 00 00 00 00 00 r1 = r4 0000000000000040 <LBB0_2>: 8: b4 00 00 00 ff ff ff ff w0 = -1 ; if (!(ip = get_iphdr(skb))) 9: 2d 23 05 00 00 00 00 00 if r3 > r2 goto +5 <LBB0_6> ; proto = ip->protocol; 10: 71 12 09 00 00 00 00 00 r2 = *(u8 *)(r1 + 9) ; if (proto != IPPROTO_TCP) 11: 56 02 03 00 06 00 00 00 if w2 != 6 goto +3 <LBB0_6> ; if (tcp->dest != 0) 12: 69 12 16 00 00 00 00 00 r2 = *(u16 *)(r1 + 22) 13: 56 02 01 00 00 00 00 00 if w2 != 0 goto +1 <LBB0_6> ; return tcp->urg_ptr; 14: 69 10 26 00 00 00 00 00 r0 = *(u16 *)(r1 + 38) 0000000000000078 <LBB0_6>: ; } 15: 95 00 00 00 00 00 00 00 exit Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20201111031213.25109-3-alexei.starovoitov@gmail.com
2020-11-12selftests: set conf.all.rp_filter=0 in bareudp.shGuillaume Nault1-0/+2
When working on the rp_filter problem, I didn't realise that disabling it on the network devices didn't cover all cases: rp_filter could also be enabled globally in the namespace, in which case it would drop packets, even if the net device has rp_filter=0. Fixes: 1ccd58331f6f ("selftests: disable rp_filter when testing bareudp") Fixes: bbbc7aa45eef ("selftests: add test script for bareudp tunnels") Signed-off-by: Guillaume Nault <gnault@redhat.com> Link: https://lore.kernel.org/r/f2d459346471f163b239aa9d63ce3e2ba9c62895.1605107012.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12Merge tag 'net-5.10-rc4' of ↵Linus Torvalds9-18/+281
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Current release - regressions: - arm64: dts: fsl-ls1028a-kontron-sl28: specify in-band mode for ENETC Current release - bugs in new features: - mptcp: provide rmem[0] limit offset to fix oops Previous release - regressions: - IPv6: Set SIT tunnel hard_header_len to zero to fix path MTU calculations - lan743x: correctly handle chips with internal PHY - bpf: Don't rely on GCC __attribute__((optimize)) to disable GCSE - mlx5e: Fix VXLAN port table synchronization after function reload Previous release - always broken: - bpf: Zero-fill re-used per-cpu map element - fix out-of-order UDP packets when forwarding with UDP GSO fraglists turned on: - fix UDP header access on Fast/frag0 UDP GRO - fix IP header access and skb lookup on Fast/frag0 UDP GRO - ethtool: netlink: add missing netdev_features_change() call - net: Update window_clamp if SOCK_RCVBUF is set - igc: Fix returning wrong statistics - ch_ktls: fix multiple leaks and corner cases in Chelsio TLS offload - tunnels: Fix off-by-one in lower MTU bounds for ICMP/ICMPv6 replies - r8169: disable hw csum for short packets on all chip versions - vrf: Fix fast path output packet handling with async Netfilter rules" * tag 'net-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits) lan743x: fix use of uninitialized variable net: udp: fix IP header access and skb lookup on Fast/frag0 UDP GRO net: udp: fix UDP header access on Fast/frag0 UDP GRO devlink: Avoid overwriting port attributes of registered port vrf: Fix fast path output packet handling with async Netfilter rules cosa: Add missing kfree in error path of cosa_write net: switch to the kernel.org patchwork instance ch_ktls: stop the txq if reaches threshold ch_ktls: tcb update fails sometimes ch_ktls/cxgb4: handle partial tag alone SKBs ch_ktls: don't free skb before sending FIN ch_ktls: packet handling prior to start marker ch_ktls: Correction in middle record handling ch_ktls: missing handling of header alone ch_ktls: Correction in trimmed_len calculation cxgb4/ch_ktls: creating skbs causes panic ch_ktls: Update cheksum information ch_ktls: Correction in finding correct length cxgb4/ch_ktls: decrypted bit is not enough net/x25: Fix null-ptr-deref in x25_connect ...
2020-11-12tools/bpf: Always run the *-clean recipesJean-Philippe Brucker1-2/+2
Make $(LIBBPF)-clean and $(LIBBPF_BOOTSTRAP)-clean .PHONY targets, in case those files exist. And keep consistency within the Makefile by making the directory dependencies order-only. Suggested-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201112091049.3159055-2-jean-philippe@linaro.org
2020-11-12tools/bpf: Add bootstrap/ to .gitignoreJean-Philippe Brucker1-1/+1
Commit 8859b0da5aac ("tools/bpftool: Fix cross-build") added a build-time bootstrap/ directory for bpftool, and removed bpftool-bootstrap. Update .gitignore accordingly. Reported-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201112091049.3159055-1-jean-philippe@linaro.org
2020-11-12selftests: pmtu.sh: improve the test result processingPo-Hsu Lin1-1/+14
This test will treat all non-zero return codes as failures, it will make the pmtu.sh test script being marked as FAILED when some sub-test got skipped. Improve the result processing by * Only mark the whole test script as SKIP when all of the sub-tests were skipped * If the sub-tests were either passed or skipped, the overall result will be PASS * If any of them has failed with return code 1 or anything bad happened (e.g. return code 127 for command not found), the overall result will be FAIL Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12selftests: pmtu.sh: use $ksft_skip for skipped return codePo-Hsu Lin1-32/+32
This test uses return code 2 as a hard-coded skipped state, let's use the kselftest framework skip code variable $ksft_skip instead to make it more readable and easier to maintain. Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11tools/bpftool: Fix build slowdownJean-Philippe Brucker1-1/+3
Commit ba2fd563b740 ("tools/bpftool: Support passing BPFTOOL_VERSION to make") changed BPFTOOL_VERSION to a recursively expanded variable, forcing it to be recomputed on every expansion of CFLAGS and dramatically slowing down the bpftool build. Restore BPFTOOL_VERSION as a simply expanded variable, guarded by an ifeq(). Fixes: ba2fd563b740 ("tools/bpftool: Support passing BPFTOOL_VERSION to make") Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201110164310.2600671-8-jean-philippe@linaro.org
2020-11-11tools/runqslower: Build bpftool using HOSTCCJean-Philippe Brucker1-1/+2
When cross building runqslower for an other architecture, the intermediate bpftool used to generate a skeleton must be built using the host toolchain. Pass HOSTCC and HOSTLD, defined in Makefile.include, to the bpftool Makefile. Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201110164310.2600671-7-jean-philippe@linaro.org
2020-11-11tools/runqslower: Enable out-of-tree buildJean-Philippe Brucker1-14/+18
Enable out-of-tree build for runqslower. Only set OUTPUT=.output if it wasn't already set by the user. Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201110164310.2600671-6-jean-philippe@linaro.org
2020-11-11tools/runqslower: Use Makefile.includeJean-Philippe Brucker1-15/+9
Makefile.include defines variables such as OUTPUT and CC for out-of-tree build and cross-build. Include it into the runqslower Makefile and use its $(QUIET*) helpers. Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201110164310.2600671-5-jean-philippe@linaro.org
2020-11-11tools/bpftool: Fix cross-buildJean-Philippe Brucker1-8/+26
The bpftool build first creates an intermediate binary, executed on the host, to generate skeletons required by the final build. When cross-building bpftool for an architecture different from the host, the intermediate binary should be built using the host compiler (gcc) and the final bpftool using the cross compiler (e.g. aarch64-linux-gnu-gcc). Generate the intermediate objects into the bootstrap/ directory using the host toolchain. Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201110164310.2600671-4-jean-philippe@linaro.org
2020-11-11tools/bpftool: Force clean of out-of-tree buildJean-Philippe Brucker1-3/+5
Cleaning a partial build can fail if the output directory for libbpf wasn't created: $ make -C tools/bpf/bpftool O=/tmp/bpf clean /bin/sh: line 0: cd: /tmp/bpf/libbpf/: No such file or directory tools/scripts/Makefile.include:17: *** output directory "/tmp/bpf/libbpf/" does not exist. Stop. make: *** [Makefile:36: /tmp/bpf/libbpf/libbpf.a-clean] Error 2 As a result make never gets around to clearing the leftover objects. Add the libbpf output directory as clean dependency to ensure clean always succeeds (similarly to the "descend" macro). The directory is later removed by the clean recipe. Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201110164310.2600671-3-jean-philippe@linaro.org
2020-11-11tools: Factor HOSTCC, HOSTLD, HOSTAR definitionsJean-Philippe Brucker6-27/+10
Several Makefiles in tools/ need to define the host toolchain variables. Move their definition to tools/scripts/Makefile.include Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/bpf/20201110164310.2600671-2-jean-philippe@linaro.org
2020-11-10selftest/bpf: Add missed ip6ip6 test backHangbin Liu2-39/+46
In comment 173ca26e9b51 ("samples/bpf: add comprehensive ipip, ipip6, ip6ip6 test") we added ip6ip6 test for bpf tunnel testing. But in commit 933a741e3b82 ("selftests/bpf: bpf tunnel test.") when we moved it to the current folder, we didn't add it. This patch add the ip6ip6 test back to bpf tunnel test. Update the ipip6's topology for both IPv4 and IPv6 testing. Since iperf test is removed as currect framework simplified it in purpose, I also removed unused tcp checkings in test_tunnel_kern.c. Fixes: 933a741e3b82 ("selftests/bpf: bpf tunnel test.") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20201110015013.1570716-2-liuhangbin@gmail.com
2020-11-10tools/bpftool: Add support for in-kernel and named BTF in `btf show`Andrii Nakryiko1-1/+27
Display vmlinux BTF name and kernel module names when listing available BTFs on the system. In human-readable output mode, module BTFs are reported with "name [module-name]", while vmlinux BTF will be reported as "name [vmlinux]". Square brackets are added by bpftool and follow kernel convention when displaying modules in human-readable text outputs. [vmuser@archvm bpf]$ sudo ../../../bpf/bpftool/bpftool btf s 1: name [vmlinux] size 4082281B 6: size 2365B prog_ids 8,6 map_ids 3 7: name [button] size 46895B 8: name [pcspkr] size 42328B 9: name [serio_raw] size 39375B 10: name [floppy] size 57185B 11: name [i2c_core] size 76186B 12: name [crc32c_intel] size 16036B 13: name [i2c_piix4] size 50497B 14: name [irqbypass] size 14124B 15: name [kvm] size 197985B 16: name [kvm_intel] size 123564B 17: name [cryptd] size 42466B 18: name [crypto_simd] size 17187B 19: name [glue_helper] size 39205B 20: name [aesni_intel] size 41034B 25: size 36150B pids bpftool(2519) In JSON mode, two fields (boolean "kernel" and string "name") are reported for each BTF object. vmlinux BTF is reported with name "vmlinux" (kernel itself returns and empty name for vmlinux BTF). [vmuser@archvm bpf]$ sudo ../../../bpf/bpftool/bpftool btf s -jp [{ "id": 1, "size": 4082281, "prog_ids": [], "map_ids": [], "kernel": true, "name": "vmlinux" },{ "id": 6, "size": 2365, "prog_ids": [8,6 ], "map_ids": [3 ], "kernel": false },{ "id": 7, "size": 46895, "prog_ids": [], "map_ids": [], "kernel": true, "name": "button" },{ ... Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Alan Maguire <alan.maguire@oracle.com> Link: https://lore.kernel.org/bpf/20201110011932.3201430-6-andrii@kernel.org
2020-11-10bpf: Assign ID to vmlinux BTF and return extra info for BTF in GET_OBJ_INFOAndrii Nakryiko1-0/+3
Allocate ID for vmlinux BTF. This makes it visible when iterating over all BTF objects in the system. To allow distinguishing vmlinux BTF (and later kernel module BTF) from user-provided BTFs, expose extra kernel_btf flag, as well as BTF name ("vmlinux" for vmlinux BTF, will equal to module's name for module BTF). We might want to later allow specifying BTF name for user-provided BTFs as well, if that makes sense. But currently this is reserved only for in-kernel BTFs. Having in-kernel BTFs exposed IDs will allow to extend BPF APIs that require in-kernel BTF type with ability to specify BTF types from kernel modules, not just vmlinux BTF. This will be implemented in a follow up patch set for fentry/fexit/fmod_ret/lsm/etc. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20201110011932.3201430-3-andrii@kernel.org
2020-11-10selftests: disable rp_filter when testing bareudpGuillaume Nault1-0/+6
Some systems have rp_filter=1 as default configuration. This breaks bareudp.sh as the intermediate namespaces handle part of the routing with regular IPv4 routes but the reverse path is done with tc (flower/tunnel_key/mirred). Signed-off-by: Guillaume Nault <gnault@redhat.com> Link: https://lore.kernel.org/r/28140b7d20161e4f766b558018fe2718f9bc1117.1604767577.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-10selftest: fix flower terse dump testsVlad Buslov1-2/+2
Iproute2 tc classifier terse dump has been accepted with modified syntax. Update the tests accordingly. Signed-off-by: Vlad Buslov <vlad@buslov.dev> Fixes: e7534fd42a99 ("selftests: implement flower classifier terse dump tests") Link: https://lore.kernel.org/r/20201107111928.453534-1-vlad@buslov.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-10Merge branch 'turbostat' of ↵Linus Torvalds4-138/+507
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull turbostat updates from Len Brown: "Update update to version 20.09.30, one kernel side fix" * 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: update version number powercap: restrict energy meter to root access tools/power turbostat: harden against cpu hotplug tools/power turbostat: adjust for temperature offset tools/power turbostat: Build with _FILE_OFFSET_BITS=64 tools/power turbostat: Support AMD Family 19h tools/power turbostat: Remove empty columns for Jacobsville tools/power turbostat: Add a new GFXAMHz column that exposes gt_act_freq_mhz. tools/power x86_energy_perf_policy: Input/output error in a VM tools/power turbostat: Skip pc8, pc9, pc10 columns, if they are disabled tools/power turbostat: Support additional CPU model numbers tools/power turbostat: Fix output formatting for ACPI CST enumeration tools/power turbostat: Replace HTTP links with HTTPS ones: TURBOSTAT UTILITY tools/power turbostat: Use sched_getcpu() instead of hardcoded cpu 0 tools/power turbostat: Enable accumulate RAPL display tools/power turbostat: Introduce functions to accumulate RAPL consumption tools/power turbostat: Make the energy variable to be 64 bit tools/power turbostat: Always print idle in the system configuration header tools/power turbostat: Print /dev/cpu_dma_latency
2020-11-10tools/power turbostat: update version numberLen Brown1-1/+1
goodbye summer... Signed-off-by: Len Brown <len.brown@intel.com>
2020-11-09selftests/net: test max_num_members, fanout_args in psock_fanoutTanner Love1-3/+69
Add an additional control test that verifies: -specifying two different max_num_members values fails -specifying max_num_members > PACKET_FANOUT_MAX fails In datapath tests, set max_num_members to PACKET_FANOUT_MAX. Signed-off-by: Tanner Love <tannerlove@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-09bpf: selftest: Use static globals in tcp_hdr_options and btf_skc_cls_ingressMartin KaFai Lau2-7/+7
Some globals in the tcp_hdr_options test and btf_skc_cls_ingress test are not using static scope. This patch fixes it. Targeting bpf-next branch as an improvement since it currently does not break the build. Fixes: ad2f8eb0095e ("bpf: selftests: Tcp header options") Fixes: 9a856cae2217 ("bpf: selftest: Add test_btf_skc_cls_ingress") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20201106225402.4135741-1-kafai@fb.com
2020-11-09Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds23-277/+2252
Pull kvm fixes from Paolo Bonzini: "ARM: - fix compilation error when PMD and PUD are folded - fix regression in reads-as-zero behaviour of ID_AA64ZFR0_EL1 - add aarch64 get-reg-list test x86: - fix semantic conflict between two series merged for 5.10 - fix (and test) enforcement of paravirtual cpuid features selftests: - various cleanups to memory management selftests - new selftests testcase for performance of dirty logging" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (30 commits) KVM: selftests: allow two iterations of dirty_log_perf_test KVM: selftests: Introduce the dirty log perf test KVM: selftests: Make the number of vcpus global KVM: selftests: Make the per vcpu memory size global KVM: selftests: Drop pointless vm_create wrapper KVM: selftests: Add wrfract to common guest code KVM: selftests: Simplify demand_paging_test with timespec_diff_now KVM: selftests: Remove address rounding in guest code KVM: selftests: Factor code out of demand_paging_test KVM: selftests: Use a single binary for dirty/clear log test KVM: selftests: Always clear dirty bitmap after iteration KVM: selftests: Add blessed SVE registers to get-reg-list KVM: selftests: Add aarch64 get-reg-list test selftests: kvm: test enforcement of paravirtual cpuid features selftests: kvm: Add exception handling to selftests selftests: kvm: Clear uc so UCALL_NONE is being properly reported selftests: kvm: Fix the segment descriptor layout to match the actual layout KVM: x86: handle MSR_IA32_DEBUGCTLMSR with report_ignored_msrs kvm: x86: request masterclock update any time guest uses different msr kvm: x86: ensure pv_cpuid.features is initialized when enabling cap ...
2020-11-09KVM: selftests: allow two iterations of dirty_log_perf_testPaolo Bonzini1-1/+1
Even though one iteration is not enough for the dirty log performance test (due to the cost of building page tables, zeroing memory etc.) two is okay and it is the default. Without this patch, "./dirty_log_perf_test" without any further arguments fails. Cc: Ben Gardon <bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-08KVM: selftests: Introduce the dirty log perf testBen Gardon6-8/+396
The dirty log perf test will time verious dirty logging operations (enabling dirty logging, dirtying memory, getting the dirty log, clearing the dirty log, and disabling dirty logging) in order to quantify dirty logging performance. This test can be used to inform future performance improvements to KVM's dirty logging infrastructure. This series was tested by running the following invocations on an Intel Skylake machine: dirty_log_perf_test -b 20m -i 100 -v 64 dirty_log_perf_test -b 20g -i 5 -v 4 dirty_log_perf_test -b 4g -i 5 -v 32 demand_paging_test -b 20m -v 64 demand_paging_test -b 20g -v 4 demand_paging_test -b 4g -v 32 All behaved as expected. Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20201027233733.1484855-6-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-08KVM: selftests: Make the number of vcpus globalAndrew Jones2-20/+20
We also check the input number of vcpus against the maximum supported. Signed-off-by: Andrew Jones <drjones@redhat.com> Message-Id: <20201104212357.171559-8-drjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-08KVM: selftests: Make the per vcpu memory size globalAndrew Jones2-12/+11
Rename vcpu_memory_bytes to something with "percpu" in it in order to be less ambiguous. Also make it global to simplify things. Signed-off-by: Andrew Jones <drjones@redhat.com> Message-Id: <20201104212357.171559-7-drjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-08KVM: selftests: Drop pointless vm_create wrapperAndrew Jones4-9/+3
Signed-off-by: Andrew Jones <drjones@redhat.com> Message-Id: <20201104212357.171559-3-drjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-17 00:32:12 +0000