Age | Commit message (Collapse) | Author | Files | Lines |
|
Fix the following coccicheck warning:
tools/testing/selftests/vDSO/vdso_test_correctness.c:309:46-47:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/vDSO/vdso_test_correctness.c:373:46-47:
WARNING: Use ARRAY_SIZE
It has been tested with gcc (Debian 8.3.0-6) 8.3.0 on x86_64.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of x86 fixes and updates:
- Make the prctl() for enabling dynamic XSTATE components correct so
it adds the newly requested feature to the permission bitmap
instead of overwriting it. Add a selftest which validates that.
- Unroll string MMIO for encrypted SEV guests as the hypervisor
cannot emulate it.
- Handle supervisor states correctly in the FPU/XSTATE code so it
takes the feature set of the fpstate buffer into account. The
feature sets can differ between host and guest buffers. Guest
buffers do not contain supervisor states. So far this was not an
issue, but with enabling PASID it needs to be handled in the buffer
offset calculation and in the permission bitmaps.
- Avoid a gazillion of repeated CPUID invocations in by caching the
values early in the FPU/XSTATE code.
- Enable CONFIG_WERROR in x86 defconfig.
- Make the X86 defconfigs more useful by adapting them to Y2022
reality"
* tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu/xstate: Consolidate size calculations
x86/fpu/xstate: Handle supervisor states in XSTATE permissions
x86/fpu/xsave: Handle compacted offsets correctly with supervisor states
x86/fpu: Cache xfeature flags from CPUID
x86/fpu/xsave: Initialize offset/size cache early
x86/fpu: Remove unused supervisor only offsets
x86/fpu: Remove redundant XCOMP_BV initialization
x86/sev: Unroll string mmio with CC_ATTR_GUEST_UNROLL_STRING_IO
x86/config: Make the x86 defconfigs a bit more usable
x86/defconfig: Enable WERROR
selftests/x86/amx: Update the ARCH_REQ_XCOMP_PERM test
x86/fpu/xstate: Fix the ARCH_REQ_XCOMP_PERM implementation
|
|
I made a stupid typo when adding the nexthop route warning selftest and
added both $IP and ip after it (double ip) on the cleanup path. The
error doesn't show up when running the test, but obviously it doesn't
cleanup properly after it.
Fixes: 392baa339c6a ("selftests: net: add delete nexthop route warning test")
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Convert the tracepoint.py file to python3 as many of the files in
tools/perf are already written in python3.
Committer testing:
# export PYTHONPATH=/tmp/build/perf/python/
# python3 ~acme/git/perf/tools/perf/python/tracepoint.py | head
time 67394457376909 prev_comm=swapper/12 prev_pid=0 prev_prio=120 prev_state=0x0 ==> next_comm=gnome-terminal- next_pid=3313 next_prio=120
time 67394457807669 prev_comm=python3 prev_pid=1485930 prev_prio=120 prev_state=0x1 ==> next_comm=swapper/13 next_pid=0 next_prio=120
time 67394457811859 prev_comm=swapper/13 prev_pid=0 prev_prio=120 prev_state=0x0 ==> next_comm=python3 next_pid=1485930 next_prio=120
time 67394457824929 prev_comm=python3 prev_pid=1485930 prev_prio=120 prev_state=0x1 ==> next_comm=swapper/13 next_pid=0 next_prio=120
time 67394457831899 prev_comm=swapper/13 prev_pid=0 prev_prio=120 prev_state=0x0 ==> next_comm=python3 next_pid=1485930 next_prio=120
time 67394457842299 prev_comm=python3 prev_pid=1485930 prev_prio=120 prev_state=0x1 ==> next_comm=swapper/13 next_pid=0 next_prio=120
time 67394457844179 prev_comm=swapper/13 prev_pid=0 prev_prio=120 prev_state=0x0 ==> next_comm=python3 next_pid=1485930 next_prio=120
time 67394457853879 prev_comm=python3 prev_pid=1485930 prev_prio=120 prev_state=0x1 ==> next_comm=swapper/13 next_pid=0 next_prio=120
time 67394457856339 prev_comm=swapper/13 prev_pid=0 prev_prio=120 prev_state=0x0 ==> next_comm=python3 next_pid=1485930 next_prio=120
time 67394457865659 prev_comm=python3 prev_pid=1485930 prev_prio=120 prev_state=0x1 ==> next_comm=swapper/13 next_pid=0 next_prio=120
Traceback (most recent call last):
File "/var/home/acme/git/perf/tools/perf/python/tracepoint.py", line 48, in <module>
main()
File "/var/home/acme/git/perf/tools/perf/python/tracepoint.py", line 37, in main
print("time %u prev_comm=%s prev_pid=%d prev_prio=%d prev_state=0x%x ==> next_comm=%s next_pid=%d next_prio=%d" % (
BrokenPipeError: [Errno 32] Broken pipe
#
Signed-off-by: Tanu M <tanu235m@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/linux-perf-users/CAPS78prawYzRZnyhWjgOnGw4EwoswNwztvfZFdCOPOydFzVwzQ@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Addresses this coccinelle warning:
./tools/perf/util/evlist.c:1333:5-8: Unneeded variable: "err". Return
"- ENOMEM" on line 1358
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/1648432532-23151-1-git-send-email-baihaowen@meizu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
perf_cpu_map__merge() will reuse one of its arguments if they are equal or
the other argument is NULL.
The arguments could be reused if it is known one set of values is a
subset of the other.
For example, a map of 0-1 and a map of just 0 when merged yields the map
of 0-1.
Currently a new map is created rather than adding a reference count to
the original 0-1 map.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: John Garry <john.garry@huawei.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20220328232648.2127340-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Returns true if the second argument is a subset of the first.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: John Garry <john.garry@huawei.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20220328232648.2127340-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
evlist contains cpus and all_cpus. all_cpus is the union of the cpu maps
of all evsels.
For non-task targets, cpus is set to be cpus requested from the command
line, defaulting to all online cpus if no cpus are specified.
For an uncore event, all_cpus may be just CPU 0 or every online CPU.
This causes all_cpus to have fewer values than the cpus variable which
is confusing given the 'all' in the name.
To try to make the behavior clearer, rename cpus to user_requested_cpus
and add comments on the two struct variables.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: John Garry <john.garry@huawei.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20220328232648.2127340-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This essentially reverts commit c72e3f04b45fb2e5 ("tools/perf/build:
Speed up git-version test on re-make") and commit 4e666cdb06eede20
("perf tools: Fix dependency for version file creation")
In commit c72e3f04b45fb2e5 ("tools/perf/build: Speed up git-version test
on re-make"), a makefile dependency on .git/HEAD was added. The
background is that running PERF-VERSION-FILE is relatively slow, and
commands like "git describe" are particularly slow.
In commit 4e666cdb06eede20 ("perf tools: Fix dependency for version file
creation"), an additional dependency on .git/ORIG_HEAD was added, as
.git/HEAD may not change for "git reset --hard HEAD^" command. However,
depending on whether we're on a branch or not, a "git cherry-pick" may
not lead to the version being updated.
As discussed with the git community in [0], using git internal files for
dependencies is not reliable. Commit 4e666cdb06ee also breaks some build
scenarios [1].
As mentioned, c72e3f04b45fb2e5 ("tools/perf/build: Speed up git-version
test on re-make") was added to speed up the build. However in commit
7572733b84997d23 ("perf tools: Fix version kernel tag") we removed the
call to "git describe", so just revert Makefile.perf back to same as pre
c72e3f04b45fb2e5 ("tools/perf/build: Speed up git-version test on
re-make") and the build should not be so slow, as below:
Pre 7572733b8499:
$> time util/PERF-VERSION-GEN
PERF_VERSION = 5.17.rc8.g4e666cdb06ee
real 0m0.110s
user 0m0.091s
sys 0m0.019s
Post 7572733b8499:
$> time util/PERF-VERSION-GEN
PERF_VERSION = 5.17.rc8.g7572733b8499
real 0m0.039s
user 0m0.036s
sys 0m0.007s
[0] https://lore.kernel.org/git/87wngkpddp.fsf@igel.home/T/#m4a4dd6de52fdbe21179306cd57b3761eb07f45f8
[1] https://lore.kernel.org/linux-perf-users/20220329093120.4173283-1-matthieu.baerts@tessares.net/T/#u
Committer testing:
After a fresh rebuild using 'make -C tools/perf O=/tmp/build/perf install-bin':
$ perf -v
perf version 5.17.g162f9db407b6
$ git log --oneline -1
162f9db407b6a6e5 (HEAD -> perf/core) perf tools: Stop depending on .git files for building PERF-VERSION-FILE
$
Now using a detached tarball, i.e. outside the kernel source tree:
$ ls -la perf*tar
ls: cannot access 'perf*tar': No such file or directory
$ make perf-tar-src-pkg
TAR
PERF_VERSION = 5.17.g31d10b3ef133
$ ls -la perf*tar
-rw-r--r--. 1 acme acme 22241280 Mar 30 13:26 perf-5.17.0.tar
$ mv perf-5.17.0.tar /tmp
$ cd /tmp
$ tar xf perf-5.17.0.tar
$ cd perf-5.17.0/
$ make -C tools/perf |& tail
CC util/pmu.o
CC util/pmu-flex.o
CC util/expr-flex.o
CC util/expr.o
LD util/scripting-engines/perf-in.o
LD util/intel-pt-decoder/perf-in.o
LD util/perf-in.o
LD perf-in.o
LINK perf
make: Leaving directory '/tmp/perf-5.17.0/tools/perf'
$ tools/perf/perf -v
perf version 5.17.g31d10b3ef133
$ pwd
/tmp/perf-5.17.0
$ cat PERF-VERSION-FILE
#define PERF_VERSION "5.17.g31d10b3ef133"
$
Fixes: 4e666cdb06eede20 ("perf tools: Fix dependency for version file creation")
Reported-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/1648635774-14581-1-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes from:
991625f3dd2cbc4b ("x86/ibt: Add IBT feature, MSR and #CP handling")
This only causes these perf files to be rebuilt:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/YkSCx2kr4ambH+Qe@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up the changes in:
caa574ffc4aaf4f2 ("drm/i915/uapi: document behaviour for DG2 64K support")
That don't add any new ioctl, so no changes in tooling.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: http://lore.kernel.org/lkml/YkSChHqaOApscFQ0@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes in:
6d8491910fcd3324 ("KVM: x86: Introduce KVM_CAP_DISABLE_QUIRKS2")
ef11c9463ae00630 ("KVM: s390: Add vm IOCTL for key checked guest absolute memory access")
e9e9feebcbc14b17 ("KVM: s390: Add optional storage key checking to MEMOP IOCTL")
That just rebuilds perf, as these patches don't add any new KVM ioctl to
be harvested for the the 'perf trace' ioctl syscall argument
beautifiers.
This is also by now used by tools/testing/selftests/kvm/, a simple test
build succeeded.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: http://lore.kernel.org/lkml/YkSCOWHQdir1lhdJ@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes from:
34739fd95fab3a5e ("KVM: arm64: Indicate SYSTEM_RESET2 in kvm_run::system_event flags field")
583cda1b0e7d5d49 ("KVM: arm64: Refuse to run VCPU if the PMU doesn't match the physical CPU")
That don't causes any changes in tooling (when built on x86), only
addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h'
diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/lkml/YkSB4Q7kWmnaqeZU@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up the changes in:
991625f3dd2cbc4b ("x86/ibt: Add IBT feature, MSR and #CP handling")
Addressing these tools/perf build warnings:
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'
That makes the beautification scripts to pick some new entries:
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
$ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
$ diff -u before after
--- before 2022-03-29 16:23:07.678740040 -0300
+++ after 2022-03-29 16:23:16.960978524 -0300
@@ -220,6 +220,13 @@
[0x00000669] = "MC6_DEMOTION_POLICY_CONFIG",
[0x00000680] = "LBR_NHM_FROM",
[0x00000690] = "CORE_PERF_LIMIT_REASONS",
+ [0x000006a0] = "IA32_U_CET",
+ [0x000006a2] = "IA32_S_CET",
+ [0x000006a4] = "IA32_PL0_SSP",
+ [0x000006a5] = "IA32_PL1_SSP",
+ [0x000006a6] = "IA32_PL2_SSP",
+ [0x000006a7] = "IA32_PL3_SSP",
+ [0x000006a8] = "IA32_INT_SSP_TAB",
[0x000006B0] = "GFX_PERF_LIMIT_REASONS",
[0x000006B1] = "RING_PERF_LIMIT_REASONS",
[0x000006c0] = "LBR_NHM_TO",
$
And this gets rebuilt:
CC /tmp/build/perf/trace/beauty/tracepoints/x86_msr.o
LD /tmp/build/perf/trace/beauty/tracepoints/perf-in.o
LD /tmp/build/perf/trace/beauty/perf-in.o
CC /tmp/build/perf/util/amd-sample-raw.o
LD /tmp/build/perf/util/perf-in.o
LD /tmp/build/perf/perf-in.o
LINK /tmp/build/perf/perf
Now one can trace systemwide asking to see backtraces to where those
MSRs are being read/written with:
# perf trace -e msr:*_msr/max-stack=32/ --filter="msr>=IA32_U_CET && msr<=IA32_INT_SSP_TAB"
^C#
If we use -v (verbose mode) we can see what it does behind the scenes:
# perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr>=IA32_U_CET && msr<=IA32_INT_SSP_TAB"
Using CPUID AuthenticAMD-25-21-0
0x6a0
0x6a8
New filter for msr:read_msr: (msr>=0x6a0 && msr<=0x6a8) && (common_pid != 597499 && common_pid != 3313)
0x6a0
0x6a8
New filter for msr:write_msr: (msr>=0x6a0 && msr<=0x6a8) && (common_pid != 597499 && common_pid != 3313)
mmap size 528384B
^C#
Example with a frequent msr:
# perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr==IA32_SPEC_CTRL" --max-events 2
Using CPUID AuthenticAMD-25-21-0
0x48
New filter for msr:read_msr: (msr==0x48) && (common_pid != 2612129 && common_pid != 3841)
0x48
New filter for msr:write_msr: (msr==0x48) && (common_pid != 2612129 && common_pid != 3841)
mmap size 528384B
Looking at the vmlinux_path (8 entries long)
symsrc__init: build id mismatch for vmlinux.
Using /proc/kcore for kernel data
Using /proc/kallsyms for symbols
0.000 Timer/2525383 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6)
do_trace_write_msr ([kernel.kallsyms])
do_trace_write_msr ([kernel.kallsyms])
__switch_to_xtra ([kernel.kallsyms])
__switch_to ([kernel.kallsyms])
__schedule ([kernel.kallsyms])
schedule ([kernel.kallsyms])
futex_wait_queue_me ([kernel.kallsyms])
futex_wait ([kernel.kallsyms])
do_futex ([kernel.kallsyms])
__x64_sys_futex ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
entry_SYSCALL_64_after_hwframe ([kernel.kallsyms])
__futex_abstimed_wait_common64 (/usr/lib64/libpthread-2.33.so)
0.030 :0/0 msr:write_msr(msr: IA32_SPEC_CTRL, val: 2)
do_trace_write_msr ([kernel.kallsyms])
do_trace_write_msr ([kernel.kallsyms])
__switch_to_xtra ([kernel.kallsyms])
__switch_to ([kernel.kallsyms])
__schedule ([kernel.kallsyms])
schedule_idle ([kernel.kallsyms])
do_idle ([kernel.kallsyms])
cpu_startup_entry ([kernel.kallsyms])
secondary_startup_64_no_verify ([kernel.kallsyms])
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/YkNd7Ky+vi7H2Zl2@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes from:
9457056ac426e5ed ("mm: madvise: MADV_DONTNEED_LOCKED")
That result in these changes in the tools:
$ diff -u tools/include/uapi/asm-generic/mman-common.h include/uapi/asm-generic/mman-common.h
--- tools/include/uapi/asm-generic/mman-common.h 2022-03-29 16:17:50.461694991 -0300
+++ include/uapi/asm-generic/mman-common.h 2022-03-27 19:12:48.923250468 -0300
@@ -75,6 +75,8 @@
#define MADV_POPULATE_READ 22 /* populate (prefault) page tables readable */
#define MADV_POPULATE_WRITE 23 /* populate (prefault) page tables writable */
+#define MADV_DONTNEED_LOCKED 24 /* like DONTNEED, but drop locked pages too */
+
/* compatibility flags */
#define MAP_FILE 0
$ tools/perf/trace/beauty/madvise_behavior.sh > before
$ cp include/uapi/asm-generic/mman-common.h tools/include/uapi/asm-generic/mman-common.h
$ tools/perf/trace/beauty/madvise_behavior.sh > after
$ diff -u before after
--- before 2022-03-29 16:18:04.091044244 -0300
+++ after 2022-03-29 16:18:11.692238906 -0300
@@ -20,6 +20,7 @@
[21] = "PAGEOUT",
[22] = "POPULATE_READ",
[23] = "POPULATE_WRITE",
+ [24] = "DONTNEED_LOCKED",
[100] = "HWPOISON",
[101] = "SOFT_OFFLINE",
};
$
I.e. now when madvise gets those behaviours as args, 'perf trace' will
be able to translate from the number to a human readable string and to
use the strings in tracepoint filter expressions.
This addresses the following perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/mman-common.h' differs from latest version at 'include/uapi/asm-generic/mman-common.h'
diff -u tools/include/uapi/asm-generic/mman-common.h include/uapi/asm-generic/mman-common.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/YkNcUfeh795yqGMV@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes in:
a6a6fe27bab48f0d ("net/smc: Dynamic control handshake limitation by socket options")
This automagically adds support for the SOL_MNC socket level:
$ diff -u tools/perf/trace/beauty/include/linux/socket.h include/linux/socket.h
--- tools/perf/trace/beauty/include/linux/socket.h 2022-03-14 17:55:22.277148656 -0300
+++ include/linux/socket.h 2022-03-27 19:12:48.908250063 -0300
@@ -366,6 +366,7 @@
#define SOL_XDP 283
#define SOL_MPTCP 284
#define SOL_MCTP 285
+#define SOL_SMC 286
/* IPX options */
#define IPX_TYPE 1
$ tools/perf/trace/beauty/socket.sh > before
$ cp include/linux/socket.h tools/perf/trace/beauty/include/linux/socket.h
$ tools/perf/trace/beauty/socket.sh > after
$ diff -u before after
--- before 2022-03-29 11:47:56.390258780 -0300
+++ after 2022-03-29 11:48:03.158436189 -0300
@@ -67,6 +67,7 @@
[283] = "XDP",
[284] = "MPTCP",
[285] = "MCTP",
+ [286] = "SMC",
};
DEFINE_STRARRAY(socket_level, "SOL_");
$
This will allow 'perf trace' to translate 286 into "SMC" as is done with
the other socket levels:
# perf trace -e setsockopt --max-events 4
344.916 ( 0.003 ms): Socket Thread/3816 setsockopt(fd: 168, level: TCP, optname: 5, optval: 0x7f5797b9c4f8, optlen: 4) = 0
344.920 ( 0.002 ms): Socket Thread/3816 setsockopt(fd: 168, level: TCP, optname: 6, optval: 0x7f5797b9c4f4, optlen: 4) = 0
1246.974 ( 0.010 ms): systemd-resolv/1128 setsockopt(fd: 22, level: IP, optname: 11, optval: 0x7ffc96cd7244, optlen: 4) = 0
1246.986 ( 0.002 ms): systemd-resolv/1128 setsockopt(fd: 22, level: IP, optname: 8, optval: 0x7ffc96cd7264, optlen: 4) = 0
This addresses this perf build warning:
Warning: Kernel ABI header at 'tools/perf/trace/beauty/include/linux/socket.h' differs from latest version at 'include/linux/socket.h'
diff -u tools/perf/trace/beauty/include/linux/socket.h include/linux/socket.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: D. Wythe <alibuda@linux.alibaba.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/YkMdpzzjPu5VZtW3@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes in:
fba60b171a032283 ("libbpf: Use IS_ERR_OR_NULL() in hashmap__free()")
That don't entail any changes in tools/perf.
This addresses this perf build warning:
Warning: Kernel ABI header at 'tools/perf/util/hashmap.h' differs from latest version at 'tools/lib/bpf/hashmap.h'
diff -u tools/perf/util/hashmap.h tools/lib/bpf/hashmap.h
Not a kernel ABI, its just that this uses the mechanism in place for
checking kernel ABI files drift.
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mauricio Vásquez <mauricio@kinvolk.io>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/YkMb2SAIai2VeuUD@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Passing NULL to perf_cpu_map__max doesn't make sense as there is no
valid max. Avoid this problem by null checking in
perf_stat_init_aggr_mode.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: John Garry <john.garry@huawei.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20220328062414.1893550-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The -c option is used to cull by stacktrace. Now, --cull option has
been Added in page_owner_sort.c. Culling by stacktrace is one of the
function of "--cull". No need to set an extra parameter. So remove -c
option.
Remove parsing of -c when parse parameter and remove "-c" from usage.
This work is coauthored by
Shenghong Han
Yixuan Cao
Chongxi Zhao
Jiajian Ye
Yuhong Feng
Yongqiang Liu
Link: https://lkml.kernel.org/r/20220326085920.1470081-1-zhangyinan2019@email.szu.edu.cn
Signed-off-by: Yinan Zhang <zhangyinan2019@email.szu.edu.cn>
Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>
Cc: Georgi Djakov <georgi.djakov@linaro.org>
Cc: Jiajian Ye <yejiajian2018@email.szu.edu.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Tang Bin <tangbin@cmss.chinamobile.com>
Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: Yongqiang Liu <liuyongqiang13@huawei.com>
Cc: Yuhong Feng <yuhongf@szu.edu.cn>
Cc: Zhenliang Wei <weizhenliang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add a test which causes a WARNING on kernels which treat a
nexthop route like a normal route when comparing for deletion and a
device is specified. That is, a route is found but we hit a warning while
matching it. The warning is from fib_info_nh() in include/net/nexthop.h
because we run it on a fib_info with nexthop object. The call chain is:
inet_rtm_delroute -> fib_table_delete -> fib_nh_match (called with a
nexthop fib_info and also with fc_oif set thus calling fib_info_nh on
the fib_info and triggering the warning).
Repro steps:
$ ip nexthop add id 12 via 172.16.1.3 dev veth1
$ ip route add 172.16.101.1/32 nhid 12
$ ip route delete 172.16.101.1/32 dev veth1
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull virtio updates from Michael Tsirkin:
- vdpa generic device type support
- more virtio hardening for broken devices (but on the same theme,
revert some virtio hotplug hardening patches - they were misusing
some interrupt flags and had to be reverted)
- RSS support in virtio-net
- max device MTU support in mlx5 vdpa
- akcipher support in virtio-crypto
- shared IRQ support in ifcvf vdpa
- a minor performance improvement in vhost
- enable virtio mem for ARM64
- beginnings of advance dma support
- cleanups, fixes all over the place
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (33 commits)
vdpa/mlx5: Avoid processing works if workqueue was destroyed
vhost: handle error while adding split ranges to iotlb
vdpa: support exposing the count of vqs to userspace
vdpa: change the type of nvqs to u32
vdpa: support exposing the config size to userspace
vdpa/mlx5: re-create forwarding rules after mac modified
virtio: pci: check bar values read from virtio config space
Revert "virtio_pci: harden MSI-X interrupts"
Revert "virtio-pci: harden INTX interrupts"
drivers/net/virtio_net: Added RSS hash report control.
drivers/net/virtio_net: Added RSS hash report.
drivers/net/virtio_net: Added basic RSS support.
drivers/net/virtio_net: Fixed padded vheader to use v1 with hash.
virtio: use virtio_device_ready() in virtio_device_restore()
tools/virtio: compile with -pthread
tools/virtio: fix after premapped buf support
virtio_ring: remove flags check for unmap packed indirect desc
virtio_ring: remove flags check for unmap split indirect desc
virtio_ring: rename vring_unmap_state_packed() to vring_unmap_extra_packed()
net/mlx5: Add support for configuring max device MTU
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add new environment variables, USERCFLAGS and USERLDFLAGS to allow
additional flags to be passed to user-space programs.
- Fix missing fflush() bugs in Kconfig and fixdep
- Fix a minor bug in the comment format of the .config file
- Make kallsyms ignore llvm's local labels, .L*
- Fix UAPI compile-test for cross-compiling with Clang
- Extend the LLVM= syntax to support LLVM=<suffix> form for using a
particular version of LLVm, and LLVM=<prefix> form for using custom
LLVM in a particular directory path.
- Clean up Makefiles
* tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Make $(LLVM) more flexible
kbuild: add --target to correctly cross-compile UAPI headers with Clang
fixdep: use fflush() and ferror() to ensure successful write to files
arch: syscalls: simplify uapi/kapi directory creation
usr/include: replace extra-y with always-y
certs: simplify empty certs creation in certs/Makefile
certs: include certs/signing_key.x509 unconditionally
kallsyms: ignore all local labels prefixed by '.L'
kconfig: fix missing '# end of' for empty menu
kconfig: add fflush() before ferror() check
kbuild: replace $(if A,A,B) with $(or A,B)
kbuild: Add environment variables for userprogs flags
kbuild: unify cmd_copy and cmd_shipped
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull more networking updates from Jakub Kicinski:
"Networking fixes and rethook patches.
Features:
- kprobes: rethook: x86: replace kretprobe trampoline with rethook
Current release - regressions:
- sfc: avoid null-deref on systems without NUMA awareness in the new
queue sizing code
Current release - new code bugs:
- vxlan: do not feed vxlan_vnifilter_dump_dev with non-vxlan devices
- eth: lan966x: fix null-deref on PHY pointer in timestamp ioctl when
interface is down
Previous releases - always broken:
- openvswitch: correct neighbor discovery target mask field in the
flow dump
- wireguard: ignore v6 endpoints when ipv6 is disabled and fix a leak
- rxrpc: fix call timer start racing with call destruction
- rxrpc: fix null-deref when security type is rxrpc_no_security
- can: fix UAF bugs around echo skbs in multiple drivers
Misc:
- docs: move netdev-FAQ to the 'process' section of the
documentation"
* tag 'net-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
vxlan: do not feed vxlan_vnifilter_dump_dev with non vxlan devices
openvswitch: Add recirc_id to recirc warning
rxrpc: fix some null-ptr-deref bugs in server_key.c
rxrpc: Fix call timer start racing with call destruction
net: hns3: fix software vlan talbe of vlan 0 inconsistent with hardware
net: hns3: fix the concurrency between functions reading debugfs
docs: netdev: move the netdev-FAQ to the process pages
docs: netdev: broaden the new vs old code formatting guidelines
docs: netdev: call out the merge window in tag checking
docs: netdev: add missing back ticks
docs: netdev: make the testing requirement more stringent
docs: netdev: add a question about re-posting frequency
docs: netdev: rephrase the 'should I update patchwork' question
docs: netdev: rephrase the 'Under review' question
docs: netdev: shorten the name and mention msgid for patch status
docs: netdev: note that RFC postings are allowed any time
docs: netdev: turn the net-next closed into a Warning
docs: netdev: move the patch marking section up
docs: netdev: minor reword
docs: netdev: replace references to old archives
...
|
|
The LLVM make variable allows a developer to quickly switch between the
GNU and LLVM tools. However, it does not handle versioned binaries, such
as the ones shipped by Debian, as LLVM=1 just defines the tool variables
with the unversioned binaries.
There was some discussion during the review of the patch that introduces
LLVM=1 around versioned binaries, ultimately coming to the conclusion
that developers can just add the folder that contains the unversioned
binaries to their PATH, as Debian's versioned suffixed binaries are
really just symlinks to the unversioned binaries in /usr/lib/llvm-#/bin:
$ realpath /usr/bin/clang-14
/usr/lib/llvm-14/bin/clang
$ PATH=/usr/lib/llvm-14/bin:$PATH make ... LLVM=1
However, that can be cumbersome to developers who are constantly testing
series with different toolchains and versions. It is simple enough to
support these versioned binaries directly in the Kbuild system by
allowing the developer to specify the version suffix with LLVM=, which
is shorter than the above suggestion:
$ make ... LLVM=-14
It does not change the meaning of LLVM=1 (which will continue to use
unversioned binaries) and it does not add too much additional complexity
to the existing $(LLVM) code, while allowing developers to quickly test
their series with different versions of the whole LLVM suite of tools.
Some developers may build LLVM from source but not add the binaries to
their PATH, as they may not want to use that toolchain systemwide.
Support those developers by allowing them to supply the directory that
the LLVM tools are available in, as it is no more complex to support
than the version suffix change above.
$ make ... LLVM=/path/to/llvm/
Update and reorder the documentation to reflect these new additions.
At the same time, notate that LLVM=0 is not the same as just omitting it
altogether, which has confused people in the past.
Link: https://lore.kernel.org/r/20200317215515.226917-1-ndesaulniers@google.com/
Link: https://lore.kernel.org/r/20220224151322.072632223@infradead.org/
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
This patch tests attaching an fentry prog to a struct_ops prog.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220330011502.2985292-1-kafai@fb.com
|
|
The seed_rng() function was written to work across lots of old kernels,
back when WireGuard used a big compatibility layer. Now that things have
evolved, we can vastly simplify this, by just marking the RNG as seeded.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"The update for this cycle includes the deprecation of block-aperture
mode and a new perf events interface for the papr_scm nvdimm driver.
The perf events approach was acked by PeterZ.
- Add perf support for nvdimm events, initially only for 'papr_scm'
devices.
- Deprecate the 'block aperture' support in libnvdimm, it only ever
existed in the specification, not in shipping product"
* tag 'libnvdimm-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm/blk: Fix title level
MAINTAINERS: remove section LIBNVDIMM BLK: MMIO-APERTURE DRIVER
powerpc/papr_scm: Fix build failure when
drivers/nvdimm: Fix build failure when CONFIG_PERF_EVENTS is not set
nvdimm/region: Delete nd_blk_region infrastructure
ACPI: NFIT: Remove block aperture support
nvdimm/namespace: Delete nd_namespace_blk
nvdimm/namespace: Delete blk namespace consideration in shared paths
nvdimm/blk: Delete the block-aperture window driver
nvdimm/region: Fix default alignment for small regions
docs: ABI: sysfs-bus-nvdimm: Document sysfs event format entries for nvdimm pmu
powerpc/papr_scm: Add perf interface support
drivers/nvdimm: Add perf interface to expose nvdimm performance stats
drivers/nvdimm: Add nvdimm pmu structure
|
|
Avoid pointer type value compared with 0 to make code clear. Reported by
coccicheck:
tools/testing/selftests/bpf/progs/map_ptr_kern.c:370:21-22:
WARNING comparing pointer to 0
tools/testing/selftests/bpf/progs/map_ptr_kern.c:397:21-22:
WARNING comparing pointer to 0
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/1648605588-19269-1-git-send-email-baihaowen@meizu.com
|
|
Andrii noticed that since f97b8b9bd630 ("bpftool: Fix a bug in subskeleton
code generation") the subskeleton code allows bpf_object__destroy_subskeleton
to overwrite the errno that subskeleton__open would return with. While this
is not currently an issue, let's make it future-proof.
This patch explicitly tracks err in subskeleton__open and skeleton__create
(i.e. calloc failure is explicitly ENOMEM) and ensures that errno is -err on
the error return path. The skeleton code had to be changed since maps and
progs codegen is shared with subskeletons.
Fixes: f97b8b9bd630 ("bpftool: Fix a bug in subskeleton code generation")
Signed-off-by: Delyan Kratunov <delyank@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/3b6bfbb770c79ae64d8de26c1c1bd9d53a4b85f8.camel@fb.com
|
|
Pull dma-mapping updates from Christoph Hellwig:
- do not zero buffer in set_memory_decrypted (Kirill A. Shutemov)
- fix return value of dma-debug __setup handlers (Randy Dunlap)
- swiotlb cleanups (Robin Murphy)
- remove most remaining users of the pci-dma-compat.h API
(Christophe JAILLET)
- share the ABI header for the DMA map_benchmark with userspace
(Tian Tao)
- update the maintainer for DMA MAPPING BENCHMARK (Xiang Chen)
- remove CONFIG_DMA_REMAP (me)
* tag 'dma-mapping-5.18' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: benchmark: extract a common header file for map_benchmark definition
dma-debug: fix return value of __setup handlers
dma-mapping: remove CONFIG_DMA_REMAP
media: v4l2-pci-skeleton: Remove usage of the deprecated "pci-dma-compat.h" API
rapidio/tsi721: Remove usage of the deprecated "pci-dma-compat.h" API
sparc: Remove usage of the deprecated "pci-dma-compat.h" API
agp/intel: Remove usage of the deprecated "pci-dma-compat.h" API
alpha: Remove usage of the deprecated "pci-dma-compat.h" API
MAINTAINERS: update maintainer list of DMA MAPPING BENCHMARK
swiotlb: simplify array allocation
swiotlb: tidy up includes
swiotlb: simplify debugfs setup
swiotlb: do not zero buffer in set_memory_decrypted()
|
|
llvm upstream patch ([1]) added to issue warning for code like
void test() {
int j = 0;
for (int i = 0; i < 1000; i++)
j++;
return;
}
This triggered several errors in selftests/bpf build since
compilation flag -Werror is used.
...
test_lpm_map.c:212:15: error: variable 'n_matches' set but not used [-Werror,-Wunused-but-set-variable]
size_t i, j, n_matches, n_matches_after_delete, n_nodes, n_lookups;
^
test_lpm_map.c:212:26: error: variable 'n_matches_after_delete' set but not used [-Werror,-Wunused-but-set-variable]
size_t i, j, n_matches, n_matches_after_delete, n_nodes, n_lookups;
^
...
prog_tests/get_stack_raw_tp.c:32:15: error: variable 'cnt' set but not used [-Werror,-Wunused-but-set-variable]
static __u64 cnt;
^
...
For test_lpm_map.c, 'n_matches'/'n_matches_after_delete' are changed to be volatile
in order to silent the warning. I didn't remove these two declarations since
they are referenced in a commented code which might be used by people in certain
cases. For get_stack_raw_tp.c, the variable 'cnt' is removed.
[1] https://reviews.llvm.org/D122271
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220325200304.2915588-1-yhs@fb.com
|
|
Arnaldo reported perf compilation fail with:
$ make -k BUILD_BPF_SKEL=1 CORESIGHT=1 PYTHON=python3
...
In file included from util/bpf_counter.c:28:
/tmp/build/perf//util/bpf_skel/bperf_leader.skel.h: In function ‘bperf_leader_bpf__assert’:
/tmp/build/perf//util/bpf_skel/bperf_leader.skel.h:351:51: error: unused parameter ‘s’ [-Werror=unused-parameter]
351 | bperf_leader_bpf__assert(struct bperf_leader_bpf *s)
| ~~~~~~~~~~~~~~~~~~~~~~~~~^
cc1: all warnings being treated as errors
If there's nothing to generate in the new assert function,
we will get unused 's' warn/error, adding 'unused' attribute to it.
Fixes: 08d4dba6ae77 ("bpftool: Bpf skeletons assert type sizes")
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/bpf/20220328083703.2880079-1-jolsa@kernel.org
|
|
14c174633f34 ("random: remove unused tracepoints") removed all the
tracepoints from drivers/char/random.c, one of which,
random:urandom_read, was used by stacktrace_build_id selftest to trigger
stack trace capture.
Fix breakage by switching to kprobing urandom_read() function.
Suggested-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220325225643.2606-1-andrii@kernel.org
|
|
Commit ee2a098851bf missed updating the comments for helper bpf_get_stack
in tools/include/uapi/linux/bpf.h. Sync it.
Fixes: ee2a098851bf ("bpf: Adjust BPF stack helper functions to accommodate skip > 0")
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/ce54617746b7ed5e9ba3b844e55e74cb8a60e0b5.1648110794.git.geliang.tang@suse.com
|
|
In [1], we added a kconfig knob that can set
/proc/sys/kernel/unprivileged_bpf_disabled to 2
We now check against this value in bpftool feature probe
[1] https://lore.kernel.org/bpf/74ec548079189e4e4dffaeb42b8987bb3c852eee.1620765074.git.daniel@iogearbox.net
Signed-off-by: Milan Landaverde <milan@mdaverde.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/bpf/20220322145012.1315376-1-milan@mdaverde.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.
Current release - regressions:
- llc: only change llc->dev when bind() succeeds, fix null-deref
Current release - new code bugs:
- smc: fix a memory leak in smc_sysctl_net_exit()
- dsa: realtek: make interface drivers depend on OF
Previous releases - regressions:
- sched: act_ct: fix ref leak when switching zones
Previous releases - always broken:
- netfilter: egress: report interface as outgoing
- vsock/virtio: enable VQs early on probe and finish the setup before
using them
Misc:
- memcg: enable accounting for nft objects"
* tag 'net-5.18-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (39 commits)
Revert "selftests: net: Add tls config dependency for tls selftests"
net/smc: Send out the remaining data in sndbuf before close
net: move net_unlink_todo() out of the header
net: dsa: bcm_sf2_cfp: fix an incorrect NULL check on list iterator
net: bnxt_ptp: fix compilation error
selftests: net: Add tls config dependency for tls selftests
memcg: enable accounting for nft objects
net/sched: act_ct: fix ref leak when switching zones
net/smc: fix a memory leak in smc_sysctl_net_exit()
selftests: tls: skip cmsg_to_pipe tests with TLS=n
octeontx2-af: initialize action variable
net: sparx5: switchdev: fix possible NULL pointer dereference
net/x25: Fix null-ptr-deref caused by x25_disconnect
qlcnic: dcb: default to returning -EOPNOTSUPP
net: sparx5: depends on PTP_1588_CLOCK_OPTIONAL
net: hns3: fix phy can not link up when autoneg off and reset
net: hns3: add NULL pointer check for hns3_set/get_ringparam()
net: hns3: add netdev reset check for hns3_set_tunable()
net: hns3: clean residual vf config after disable sriov
net: hns3: add max order judgement for tx spare buffer
...
|
|
This reverts commit d9142e1cf3bbdaf21337767114ecab26fe702d47.
The test is supposed to run cleanly with TLS is disabled,
to test compatibility with TCP behavior. I can't repro
the failure [1], the problem should be debugged rather
than papered over.
Link: https://lore.kernel.org/all/20220325161203.7000698c@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/ [1]
Fixes: d9142e1cf3bb ("selftests: net: Add tls config dependency for tls selftests")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20220328212904.2685395-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching updates from Petr Mladek:
- Forced transitions block only to-be-removed livepatches [Chengming]
- Detect when ftrace handler could not be disabled in self-tests [David]
- Calm down warning from a static analyzer [Tom]
* tag 'livepatching-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
livepatch: Reorder to use before freeing a pointer
livepatch: Don't block removal of patches that are safe to unload
livepatch: Skip livepatch tests if ftrace cannot be configured
|
|
When using pthreads, one has to compile and link with -lpthread,
otherwise e.g. glibc is not guaranteed to be reentrant.
This replaces -lpthread.
Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
updates for 5.18-rc1.
Included in here are merges from driver subsystems which contain:
- iio driver updates and new drivers
- fsi driver updates
- fpga driver updates
- habanalabs driver updates and support for new hardware
- soundwire driver updates and new drivers
- phy driver updates and new drivers
- coresight driver updates
- icc driver updates
Individual changes include:
- mei driver updates
- interconnect driver updates
- new PECI driver subsystem added
- vmci driver updates
- lots of tiny misc/char driver updates
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits)
firmware: google: Properly state IOMEM dependency
kgdbts: fix return value of __setup handler
firmware: sysfb: fix platform-device leak in error path
firmware: stratix10-svc: add missing callback parameter on RSU
arm64: dts: qcom: add non-secure domain property to fastrpc nodes
misc: fastrpc: Add dma handle implementation
misc: fastrpc: Add fdlist implementation
misc: fastrpc: Add helper function to get list and page
misc: fastrpc: Add support to secure memory map
dt-bindings: misc: add fastrpc domain vmid property
misc: fastrpc: check before loading process to the DSP
misc: fastrpc: add secure domain support
dt-bindings: misc: add property to support non-secure DSP
misc: fastrpc: Add support to get DSP capabilities
misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP
misc: fastrpc: separate fastrpc device from channel context
dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells
dt-bindings: nvmem: make "reg" property optional
nvmem: brcm_nvram: parse NVRAM content into NVMEM cells
nvmem: dt-bindings: Fix the error of dt-bindings check
...
|
|
selftest net tls test cases need TLS=m without this the test hangs.
Enabling config TLS solves this problem and runs to complete.
- CONFIG_TLS=m
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools updates from Arnaldo Carvalho de Melo:
"New features:
perf ftrace:
- Add -n/--use-nsec option to the 'latency' subcommand.
Default: usecs:
$ sudo perf ftrace latency -T dput -a sleep 1
# DURATION | COUNT | GRAPH |
0 - 1 us | 2098375 | ############################# |
1 - 2 us | 61 | |
2 - 4 us | 33 | |
4 - 8 us | 13 | |
8 - 16 us | 124 | |
16 - 32 us | 123 | |
32 - 64 us | 1 | |
64 - 128 us | 0 | |
128 - 256 us | 1 | |
256 - 512 us | 0 | |
Better granularity with nsec:
$ sudo perf ftrace latency -T dput -a -n sleep 1
# DURATION | COUNT | GRAPH |
0 - 1 us | 0 | |
1 - 2 ns | 0 | |
2 - 4 ns | 0 | |
4 - 8 ns | 0 | |
8 - 16 ns | 0 | |
16 - 32 ns | 0 | |
32 - 64 ns | 0 | |
64 - 128 ns | 1163434 | ############## |
128 - 256 ns | 914102 | ############# |
256 - 512 ns | 884 | |
512 - 1024 ns | 613 | |
1 - 2 us | 31 | |
2 - 4 us | 17 | |
4 - 8 us | 7 | |
8 - 16 us | 123 | |
16 - 32 us | 83 | |
perf lock:
- Add -c/--combine-locks option to merge lock instances in the same
class into a single entry.
# perf lock report -c
Name acquired contended avg wait(ns) total wait(ns) max wait(ns) min wait(ns)
rcu_read_lock 251225 0 0 0 0 0
hrtimer_bases.lock 39450 0 0 0 0 0
&sb->s_type->i_l... 10301 1 662 662 662 662
ptlock_ptr(page) 10173 2 701 1402 760 642
&(ei->i_block_re... 8732 0 0 0 0 0
&xa->xa_lock 8088 0 0 0 0 0
&base->lock 6705 0 0 0 0 0
&p->pi_lock 5549 0 0 0 0 0
&dentry->d_lockr... 5010 4 1274 5097 1844 789
&ep->lock 3958 0 0 0 0 0
- Add -F/--field option to customize the list of fields to output:
$ perf lock report -F contended,wait_max -k avg_wait
Name contended max wait(ns) avg wait(ns)
slock-AF_INET6 1 23543 23543
&lruvec->lru_lock 5 18317 11254
slock-AF_INET6 1 10379 10379
rcu_node_1 1 2104 2104
&dentry->d_lockr... 1 1844 1844
&dentry->d_lockr... 1 1672 1672
&newf->file_lock 15 2279 1025
&dentry->d_lockr... 1 792 792
- Add --synth=no option for record, as there is no need to symbolize,
lock names comes from the tracepoints.
perf record:
- Threaded recording, opt-in, via the new --threads command line
option.
- Improve AMD IBS (Instruction-Based Sampling) error handling
messages.
perf script:
- Add 'brstackinsnlen' field (use it with -F) for branch stacks.
- Output branch sample type in 'perf script'.
perf report:
- Add "addr_from" and "addr_to" sort dimensions.
- Print branch stack entry type in 'perf report --dump-raw-trace'
- Fix symbolization for chrooted workloads.
Hardware tracing:
Intel PT:
- Add CFE (Control Flow Event) and EVD (Event Data) packets support.
- Add MODE.Exec IFLAG bit support.
Explanation about these features from the "Intel® 64 and IA-32
architectures software developer’s manual combined volumes: 1, 2A,
2B, 2C, 2D, 3A, 3B, 3C, 3D, and 4" PDF at:
https://cdrdv2.intel.com/v1/dl/getContent/671200
At page 3951:
"32.2.4
Event Trace is a capability that exposes details about the
asynchronous events, when they are generated, and when their
corresponding software event handler completes execution. These
include:
o Interrupts, including NMI and SMI, including the interrupt
vector when defined.
o Faults, exceptions including the fault vector.
- Page faults additionally include the page fault address,
when in context.
o Event handler returns, including IRET and RSM.
o VM exits and VM entries.¹
- VM exits include the values written to the “exit reason”
and “exit qualification” VMCS fields. INIT and SIPI events.
o TSX aborts, including the abort status returned for the RTM
instructions.
o Shutdown.
Additionally, it provides indication of the status of the
Interrupt Flag (IF), to indicate when interrupts are masked"
ARM CoreSight:
- Use advertised caps/min_interval as default sample_period on ARM
spe.
- Update deduction of TRCCONFIGR register for branch broadcast on
ARM's CoreSight ETM.
Vendor Events (JSON):
Intel:
- Update events and metrics for: Alderlake, Broadwell, Broadwell DE,
BroadwellX, CascadelakeX, Elkhartlake, Bonnell, Goldmont,
GoldmontPlus, Westmere EP-DP, Haswell, HaswellX, Icelake, IcelakeX,
Ivybridge, Ivytown, Jaketown, Knights Landing, Nehalem EP,
Sandybridge, Silvermont, Skylake, Skylake Server, SkylakeX,
Tigerlake, TremontX, Westmere EP-SP, and Westmere EX.
ARM:
- Add support for HiSilicon CPA PMU aliasing.
perf stat:
- Fix forked applications enablement of counters.
- The 'slots' should only be printed on a different order than the
one specified on the command line when 'topdown' events are
present, fix it.
Miscellaneous:
- Sync msr-index, cpufeatures header files with the kernel sources.
- Stop using some deprecated libbpf APIs in 'perf trace'.
- Fix some spelling mistakes.
- Refactor the maps pointers usage to pave the way for using refcount
debugging.
- Only offer the --tui option on perf top, report and annotate when
perf was built with libslang.
- Don't mention --to-ctf in 'perf data --help' when not linking with
the required library, libbabeltrace.
- Use ARRAY_SIZE() instead of ad hoc equivalent, spotted by
array_size.cocci.
- Enhance the matching of sub-commands abbreviations:
'perf c2c rec' -> 'perf c2c record'
'perf c2c recport -> error
- Set build-id using build-id header on new mmap records.
- Fix generation of 'perf --version' string.
perf test:
- Add test for the arm_spe event.
- Add test to check unwinding using fame-pointer (fp) mode on arm64.
- Make metric testing more robust in 'perf test'.
- Add error message for unsupported branch stack cases.
libperf:
- Add API for allocating new thread map array.
- Fix typo in perf_evlist__open() failure error messages in libperf
tests.
perf c2c:
- Replace bitmap_weight() with bitmap_empty() where appropriate"
* tag 'perf-tools-for-v5.18-2022-03-26' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (143 commits)
perf evsel: Improve AMD IBS (Instruction-Based Sampling) error handling messages
perf python: Add perf_env stubs that will be needed in evsel__open_strerror()
perf tools: Enhance the matching of sub-commands abbreviations
libperf tests: Fix typo in perf_evlist__open() failure error messages
tools arm64: Import cputype.h
perf lock: Add -F/--field option to control output
perf lock: Extend struct lock_key to have print function
perf lock: Add --synth=no option for record
tools headers cpufeatures: Sync with the kernel sources
tools headers cpufeatures: Sync with the kernel sources
perf stat: Fix forked applications enablement of counters
tools arch x86: Sync the msr-index.h copy with the kernel sources
perf evsel: Make evsel__env() always return a valid env
perf build-id: Fix spelling mistake "Cant" -> "Can't"
perf header: Fix spelling mistake "could't" -> "couldn't"
perf script: Add 'brstackinsnlen' for branch stacks
perf parse-events: Move slots only with topdown
perf ftrace latency: Update documentation
perf ftrace latency: Add -n/--use-nsec option
perf tools: Fix version kernel tag
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock updates from Mike Rapoport:
"Test suite and a small cleanup:
- A small cleanup of unused variable in __next_mem_pfn_range_in_zone
- Initial test suite to simulate memblock behaviour in userspace"
* tag 'memblock-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: (27 commits)
memblock tests: Add TODO and README files
memblock tests: Add memblock_alloc_try_nid tests for bottom up
memblock tests: Add memblock_alloc_try_nid tests for top down
memblock tests: Add memblock_alloc_from tests for bottom up
memblock tests: Add memblock_alloc_from tests for top down
memblock tests: Add memblock_alloc tests for bottom up
memblock tests: Add memblock_alloc tests for top down
memblock tests: Add simulation of physical memory
memblock tests: Split up reset_memblock function
memblock tests: Fix testing with 32-bit physical addresses
memblock: __next_mem_pfn_range_in_zone: remove unneeded local variable nid
memblock tests: Add memblock_free tests
memblock tests: Add memblock_add_node test
memblock tests: Add memblock_remove tests
memblock tests: Add memblock_reserve tests
memblock tests: Add memblock_add tests
memblock tests: Add memblock reset function
memblock tests: Add skeleton of the memblock simulator
tools/include: Add debugfs.h stub
tools/include: Add pfn.h stub
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 CET-IBT (Control-Flow-Integrity) support from Peter Zijlstra:
"Add support for Intel CET-IBT, available since Tigerlake (11th gen),
which is a coarse grained, hardware based, forward edge
Control-Flow-Integrity mechanism where any indirect CALL/JMP must
target an ENDBR instruction or suffer #CP.
Additionally, since Alderlake (12th gen)/Sapphire-Rapids, speculation
is limited to 2 instructions (and typically fewer) on branch targets
not starting with ENDBR. CET-IBT also limits speculation of the next
sequential instruction after the indirect CALL/JMP [1].
CET-IBT is fundamentally incompatible with retpolines, but provides,
as described above, speculation limits itself"
[1] https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/technical-documentation/branch-history-injection.html
* tag 'x86_core_for_5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
kvm/emulate: Fix SETcc emulation for ENDBR
x86/Kconfig: Only allow CONFIG_X86_KERNEL_IBT with ld.lld >= 14.0.0
x86/Kconfig: Only enable CONFIG_CC_HAS_IBT for clang >= 14.0.0
kbuild: Fixup the IBT kbuild changes
x86/Kconfig: Do not allow CONFIG_X86_X32_ABI=y with llvm-objcopy
x86: Remove toolchain check for X32 ABI capability
x86/alternative: Use .ibt_endbr_seal to seal indirect calls
objtool: Find unused ENDBR instructions
objtool: Validate IBT assumptions
objtool: Add IBT/ENDBR decoding
objtool: Read the NOENDBR annotation
x86: Annotate idtentry_df()
x86,objtool: Move the ASM_REACHABLE annotation to objtool.h
x86: Annotate call_on_stack()
objtool: Rework ASM_REACHABLE
x86: Mark __invalid_creds() __noreturn
exit: Mark do_group_exit() __noreturn
x86: Mark stop_this_cpu() __noreturn
objtool: Ignore extra-symbol code
objtool: Rename --duplicate to --lto
...
|
|
These are negative tests, testing TLS code rejects certain
operations. They won't pass without TLS enabled, pure TCP
accepts those operations.
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Fixes: d87d67fd61ef ("selftests: tls: test splicing cmsgs")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Improve the error message returned on failed perf_event_open() on AMD
systems when using IBS (Instruction-Based Sampling).
Output of executing 'perf record -e ibs_op// true' as a non root user
BEFORE this patch (perf will add the 'u' modifier at the end to exclude
kernel/hypervisor sampling):
The sys_perf_event_open() syscall returned with 22 (Invalid argument)for event (ibs_op//u).
/bin/dmesg | grep -i perf may provide additional information.
Output after:
AMD IBS can't exclude kernel events. Try running at a higher privilege level.
Output of executing 'sudo perf record -e ibs_op// true' BEFORE this patch:
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (ibs_op//).
/bin/dmesg | grep -i perf may provide additional information.
Output after:
Error:
Invalid event (ibs_op//) in per-thread mode, enable system wide with '-a'.
Folowing the suggestion:
$ sudo perf record -a -e ibs_op// true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.664 MB perf.data (194 samples) ]
$
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: João Martins <joao.m.martins@oracle.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20220322221517.2510440-12-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The AMD IBS error message enhancements will use these, but we're not
using evsel__open_strerror() in the python binding so far.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We support short command 'rec*' for 'record' and 'rep*' for 'report' in
lots of sub-commands, but the matching is not quite strict currnetly.
It may be puzzling sometime, like we mis-type a 'recport' to report but
it will perform 'record' in fact without any message.
To fix this, add a check to ensure that the short cmd is valid prefix
of the real command.
Committer testing:
[root@quaco ~]# perf c2c re sleep 1
Usage: perf c2c {record|report}
-v, --verbose be more verbose (show counter open errors, etc)
# perf c2c rec sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.038 MB perf.data (16 samples) ]
# perf c2c recport sleep 1
Usage: perf c2c {record|report}
-v, --verbose be more verbose (show counter open errors, etc)
# perf c2c record sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.038 MB perf.data (15 samples) ]
# perf c2c records sleep 1
Usage: perf c2c {record|report}
-v, --verbose be more verbose (show counter open errors, etc)
#
Signed-off-by: Wei Li <liwei391@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Rui Xiang <rui.xiang@huawei.com>
Link: http://lore.kernel.org/lkml/20220325092032.2956161-1-liwei391@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch corrects typos in error messages. I should be "evlist", not
"evsel" as the function that fails is perf_evlist__open().
Fixes: 3ce311afb5583cf3 ("libperf: Move to tools/lib/perf")
Fixes: a7f3713f6bf207e6 ("libperf tests: Add test_stat_multiplexing test")
Signed-off-by: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220325043829.224045-2-nakamura.shun@fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|