Age | Commit message (Collapse) | Author | Files | Lines |
|
The commit 1295e2cf3065 ("inet: minor optimization for backlog setting in
listen(2)") added change so that sk_max_ack_backlog is initialised earlier
in inet_dccp_listen() and inet_listen(). Since then, we no longer use
backlog in inet_csk_listen_start(), so let's remove it.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Richard Sailer <richard_siegfried@systemli.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
No hard dependencies here, just skip if test environ lacks
nft binary or the needed kernel config options.
The test case spawns listener in ns2 but ns1 will connect
to the ip address of ns4.
policy routing + tproxy rule will redirect packets to ns2 instead
of forward.
v3: - update mptcp/config (Mat Martineau)
- more verbose SKIP messages in mptcp_connect.sh
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, mac80211.
Current release - regressions:
- devlink: don't throw an error if flash notification sent before
devlink visible
- page_pool: Revert "page_pool: disable dma mapping support...",
turns out there are active arches who need it
Current release - new code bugs:
- amt: cancel delayed_work synchronously in amt_fini()
Previous releases - regressions:
- xsk: fix crash on double free in buffer pool
- bpf: fix inner map state pruning regression causing program
rejections
- mac80211: drop check for DONT_REORDER in __ieee80211_select_queue,
preventing mis-selecting the best effort queue
- mac80211: do not access the IV when it was stripped
- mac80211: fix radiotap header generation, off-by-one
- nl80211: fix getting radio statistics in survey dump
- e100: fix device suspend/resume
Previous releases - always broken:
- tcp: fix uninitialized access in skb frags array for Rx 0cp
- bpf: fix toctou on read-only map's constant scalar tracking
- bpf: forbid bpf_ktime_get_coarse_ns and bpf_timer_* in tracing
progs
- tipc: only accept encrypted MSG_CRYPTO msgs
- smc: transfer remaining wait queue entries during fallback, fix
missing wake ups
- udp: validate checksum in udp_read_sock() (when sockmap is used)
- sched: act_mirred: drop dst for the direction from egress to
ingress
- virtio_net_hdr_to_skb: count transport header in UFO, prevent
allowing bad skbs into the stack
- nfc: reorder the logic in nfc_{un,}register_device, fix unregister
- ipsec: check return value of ipv6_skip_exthdr
- usb: r8152: add MAC passthrough support for more Lenovo Docks"
* tag 'net-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (96 commits)
ptp: ocp: Fix a couple NULL vs IS_ERR() checks
net: ethernet: dec: tulip: de4x5: fix possible array overflows in type3_infoblock()
net: tulip: de4x5: fix the problem that the array 'lp->phy[8]' may be out of bound
ipv6: check return value of ipv6_skip_exthdr
e100: fix device suspend/resume
devlink: Don't throw an error if flash notification sent before devlink visible
page_pool: Revert "page_pool: disable dma mapping support..."
ethernet: hisilicon: hns: hns_dsaf_misc: fix a possible array overflow in hns_dsaf_ge_srst_by_port()
octeontx2-af: debugfs: don't corrupt user memory
NFC: add NCI_UNREG flag to eliminate the race
NFC: reorder the logic in nfc_{un,}register_device
NFC: reorganize the functions in nci_request
tipc: check for null after calling kmemdup
i40e: Fix display error code in dmesg
i40e: Fix creation of first queue by omitting it if is not power of two
i40e: Fix warning message and call stack during rmmod i40e driver
i40e: Fix ping is lost after configuring ADq on VF
i40e: Fix changing previously set num_queue_pairs for PFs
i40e: Fix NULL ptr dereference on VSI filter sync
i40e: Fix correct max_pkt_size on VF RX queue
...
|
|
Pull KVM fixes from Paolo Bonzini:
"Selftest changes:
- Cleanups for the perf test infrastructure and mapping hugepages
- Avoid contention on mmap_sem when the guests start to run
- Add event channel upcall support to xen_shinfo_test
x86 changes:
- Fixes for Xen emulation
- Kill kvm_map_gfn() / kvm_unmap_gfn() and broken gfn_to_pfn_cache
- Fixes for migration of 32-bit nested guests on 64-bit hypervisor
- Compilation fixes
- More SEV cleanups
Generic:
- Cap the return value of KVM_CAP_NR_VCPUS to both KVM_CAP_MAX_VCPUS
and num_online_cpus(). Most architectures were only using one of
the two"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits)
KVM: x86: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
KVM: s390: Cap KVM_CAP_NR_VCPUS by num_online_cpus()
KVM: RISC-V: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
KVM: PPC: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
KVM: MIPS: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
KVM: arm64: Cap KVM_CAP_NR_VCPUS by kvm_arm_default_max_vcpus()
KVM: x86: Assume a 64-bit hypercall for guests with protected state
selftests: KVM: Add /x86_64/sev_migrate_tests to .gitignore
riscv: kvm: fix non-kernel-doc comment block
KVM: SEV: Fix typo in and tweak name of cmd_allowed_from_miror()
KVM: SEV: Drop a redundant setting of sev->asid during initialization
KVM: SEV: WARN if SEV-ES is marked active but SEV is not
KVM: SEV: Set sev_info.active after initial checks in sev_guest_init()
KVM: SEV: Disallow COPY_ENC_CONTEXT_FROM if target has created vCPUs
KVM: Kill kvm_map_gfn() / kvm_unmap_gfn() and gfn_to_pfn_cache
KVM: nVMX: Use a gfn_to_hva_cache for vmptrld
KVM: nVMX: Use kvm_read_guest_offset_cached() for nested VMCS check
KVM: x86/xen: Use sizeof_field() instead of open-coding it
KVM: nVMX: Use kvm_{read,write}_guest_cached() for shadow_vmcs12
KVM: x86/xen: Fix get_attr of KVM_XEN_ATTR_TYPE_SHARED_INFO
...
|
|
$ git status
nothing to commit, working tree clean
$
$ make -C tools/testing/selftests/kvm/ > /dev/null 2>&1
$ git status
Untracked files:
(use "git add <file>..." to include in what will be committed)
tools/testing/selftests/kvm/x86_64/sev_migrate_tests
nothing added to commit but untracked files present (use "git add" to track)
$
Fixes: 6a58150859fdec76 ("selftest: KVM: Add intra host migration tests")
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Marc Orr <marcorr@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Gonda <pgonda@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Message-Id: <YZPIPfvYgRDCZi/w@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add support to inet v4 raw sockets for binding to nonlocal addresses
through the IP_FREEBIND and IP_TRANSPARENT socket options, as well as
the ipv4.ip_nonlocal_bind kernel parameter.
Add helper function to inet_sock.h to check for bind address validity on
the base of the address type and whether nonlocal address are enabled
for the socket via any of the sockopts/sysctl, deduplicating checks in
ipv4/ping.c, ipv4/af_inet.c, ipv6/af_inet6.c (for mapped v4->v6
addresses), and ipv4/raw.c.
Add test cases with IP[V6]_FREEBIND verifying that both v4 and v6 raw
sockets support binding to nonlocal addresses after the change. Add
necessary support for the test cases to nettest.
Signed-off-by: Riccardo Paolo Bestetti <pbl@bestov.io>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20211117090010.125393-1-pbl@bestov.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
add a selftest that verifies the correct behavior of TC act_mirred egress
to ingress: in particular, it checks if the dst_entry is removed from skb
before redirect egress -> ingress. The correct behavior is: an ICMP 'echo
request' generated by ping will be received and generate a reply the same
way as the one generated by mausezahn.
Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2021-11-16
We've added 12 non-merge commits during the last 5 day(s) which contain
a total of 23 files changed, 573 insertions(+), 73 deletions(-).
The main changes are:
1) Fix pruning regression where verifier went overly conservative rejecting
previsouly accepted programs, from Alexei Starovoitov and Lorenz Bauer.
2) Fix verifier TOCTOU bug when using read-only map's values as constant
scalars during verification, from Daniel Borkmann.
3) Fix a crash due to a double free in XSK's buffer pool, from Magnus Karlsson.
4) Fix libbpf regression when cross-building runqslower, from Jean-Philippe Brucker.
5) Forbid use of bpf_ktime_get_coarse_ns() and bpf_timer_*() helpers in tracing
programs due to deadlock possibilities, from Dmitrii Banshchikov.
6) Fix checksum validation in sockmap's udp_read_sock() callback, from Cong Wang.
7) Various BPF sample fixes such as XDP stats in xdp_sample_user, from Alexander Lobakin.
8) Fix libbpf gen_loader error handling wrt fd cleanup, from Kumar Kartikeya Dwivedi.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
udp: Validate checksum in udp_read_sock()
bpf: Fix toctou on read-only map's constant scalar tracking
samples/bpf: Fix build error due to -isystem removal
selftests/bpf: Add tests for restricted helpers
bpf: Forbid bpf_ktime_get_coarse_ns and bpf_timer_* in tracing progs
libbpf: Perform map fd cleanup for gen_loader in case of error
samples/bpf: Fix incorrect use of strlen in xdp_redirect_cpu
tools/runqslower: Fix cross-build
samples/bpf: Fix summary per-sec stats in xdp_sample_user
selftests/bpf: Check map in map pruning
bpf: Fix inner map state pruning regression.
xsk: Fix crash on double free in buffer pool
====================
Link: https://lore.kernel.org/r/20211116141134.6490-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
- Cleanups for the perf test infrastructure and mapping hugepages
- Avoid contention on mmap_sem when the guests start to run
- Add event channel upcall support to xen_shinfo_test
|
|
Change memslot_modification_stress_test to use perf_test_destroy_vm
instead of manually calling ucall_uninit and kvm_vm_free.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20211111001257.1446428-5-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Thread creation requires taking the mmap_sem in write mode, which causes
vCPU threads running in guest mode to block while they are populating
memory. Fix this by waiting for all vCPU threads to be created and start
running before entering guest mode on any one vCPU thread.
This substantially improves the "Populate memory time" when using 1GiB
pages since it allows all vCPUs to zero pages in parallel rather than
blocking because a writer is waiting (which is waiting for another vCPU
that is busy zeroing a 1GiB page).
Before:
$ ./dirty_log_perf_test -v256 -s anonymous_hugetlb_1gb
...
Populate memory time: 52.811184013s
After:
$ ./dirty_log_perf_test -v256 -s anonymous_hugetlb_1gb
...
Populate memory time: 10.204573342s
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20211111001257.1446428-4-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Move vCPU thread creation and joining to common helper functions. This
is in preparation for the next commit which ensures that all vCPU
threads are fully created before entering guest mode on any one
vCPU.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20211111001257.1446428-3-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Start at iteration 0 instead of -1 to avoid having to initialize
vcpu_last_completed_iteration when setting up vCPU threads. This
simplifies the next commit where we move vCPU thread initialization
out to a common helper.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20211111001257.1446428-2-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Copy perf_test_args to the guest during VM creation instead of relying on
the caller to do so at their leisure. Ideally, tests wouldn't even be
able to modify perf_test_args, i.e. they would have no motivation to do
the sync, but enforcing that is arguably a net negative for readability.
No functional change intended.
[Set wr_fract=1 by default and add helper to override it since the new
access_tracking_perf_test needs to set it dynamically.]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20211111000310.1435032-13-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Fill the per-vCPU args when creating the perf_test VM instead of having
the caller do so. This helps ensure that any adjustments to the number
of pages (and thus vcpu_memory_bytes) are reflected in the per-VM args.
Automatically filling the per-vCPU args will also allow a future patch
to do the sync to the guest during creation.
Signed-off-by: Sean Christopherson <seanjc@google.com>
[Updated access_tracking_perf_test as well.]
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20211111000310.1435032-12-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Use the already computed guest_num_pages when creating the so called
extra VM pages for a perf test, and add a comment explaining why the
pages are allocated as extra pages.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20211111000310.1435032-11-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Remove perf_test_args.host_page_size and instead use getpagesize() so
that it's somewhat obvious that, for tests that care about the host page
size, they care about the system page size, not the hardware page size,
e.g. that the logic is unchanged if hugepages are in play.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20211111000310.1435032-10-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Move the per-VM GPA into perf_test_args instead of storing it as a
separate global variable. It's not obvious that guest_test_phys_mem
holds a GPA, nor that it's connected/coupled with per_vcpu->gpa.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20211111000310.1435032-9-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Grab the per-vCPU GPA and number of pages from perf_util in the demand
paging test instead of duplicating perf_util's calculations.
Note, this may or may not result in a functional change. It's not clear
that the test's calculations are guaranteed to yield the same value as
perf_util, e.g. if guest_percpu_mem_size != vcpu_args->pages.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20211111000310.1435032-8-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Capture the per-vCPU GPA in perf_test_vcpu_args so that tests can get
the GPA without having to calculate the GPA on their own.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20211111000310.1435032-7-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Use 'pta' as a local pointer to the global perf_tests_args in order to
shorten line lengths and make the code borderline readable.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20211111000310.1435032-6-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Assert that the GPA for a memslot backed by a hugepage is aligned to
the hugepage size and fix perf_test_util accordingly. Lack of GPA
alignment prevents KVM from backing the guest with hugepages, e.g. x86's
write-protection of hugepages when dirty logging is activated is
otherwise not exercised.
Add a comment explaining that guest_page_size is for non-huge pages to
try and avoid confusion about what it actually tracks.
Cc: Ben Gardon <bgardon@google.com>
Cc: Yanan Wang <wangyanan55@huawei.com>
Cc: Andrew Jones <drjones@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Aaron Lewis <aaronlewis@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
[Used get_backing_src_pagesz() to determine alignment dynamically.]
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20211111000310.1435032-5-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Manually padding and aligning the mmap region is only needed when using
THP. When using HugeTLB, mmap will always return an address aligned to
the HugeTLB page size. Add a comment to clarify this and assert the mmap
behavior for HugeTLB.
[Removed requirement that HugeTLB mmaps must be padded per Yanan's
feedback and added assertion that mmap returns aligned addresses
when using HugeTLB.]
Cc: Ben Gardon <bgardon@google.com>
Cc: Yanan Wang <wangyanan55@huawei.com>
Cc: Andrew Jones <drjones@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Aaron Lewis <aaronlewis@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20211111000310.1435032-4-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Refactor align() to work with non-pointers and split into separate
helpers for aligning up vs. down. Add align_ptr_up() for use with
pointers. Expose all helpers so that they can be used by tests and/or
other utilities. The align_down() helper in particular will be used to
ensure gpa alignment for hugepages.
No functional change intended.
[Added sepearate up/down helpers and replaced open-coded alignment
bit math throughout the KVM selftests.]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20211111000310.1435032-3-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Explicitly state the indices when populating vm_guest_mode_params to
make it marginally easier to visualize what's going on.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
[Added indices for new guest modes.]
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20211111000310.1435032-2-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When I first looked at this, there was no support for guest exception
handling in the KVM selftests. In fact it was merged into 5.10 before
the Xen support got merged in 5.11, and I could have used it from the
start.
Hook it up now, to exercise the Xen upcall delivery. I'm about to make
things a bit more interesting by handling the full 2level event channel
stuff in-kernel on top of the basic vector injection that we already
have, and I'll want to build more tests on top.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20211115165030.7422-3-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This patch adds tests that bpf_ktime_get_coarse_ns(), bpf_timer_* and
bpf_spin_lock()/bpf_spin_unlock() helpers are forbidden in tracing progs
as their use there may result in various locking issues.
Signed-off-by: Dmitrii Banshchikov <me@ubique.spb.ru>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211113142227.566439-3-me@ubique.spb.ru
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2021-11-15
We've added 72 non-merge commits during the last 13 day(s) which contain
a total of 171 files changed, 2728 insertions(+), 1143 deletions(-).
The main changes are:
1) Add btf_type_tag attributes to bring kernel annotations like __user/__rcu to
BTF such that BPF verifier will be able to detect misuse, from Yonghong Song.
2) Big batch of libbpf improvements including various fixes, future proofing APIs,
and adding a unified, OPTS-based bpf_prog_load() low-level API, from Andrii Nakryiko.
3) Add ingress_ifindex to BPF_SK_LOOKUP program type for selectively applying the
programmable socket lookup logic to packets from a given netdev, from Mark Pashmfouroush.
4) Remove the 128M upper JIT limit for BPF programs on arm64 and add selftest to
ensure exception handling still works, from Russell King and Alan Maguire.
5) Add a new bpf_find_vma() helper for tracing to map an address to the backing
file such as shared library, from Song Liu.
6) Batch of various misc fixes to bpftool, fixing a memory leak in BPF program dump,
updating documentation and bash-completion among others, from Quentin Monnet.
7) Deprecate libbpf bpf_program__get_prog_info_linear() API and migrate its users as
the API is heavily tailored around perf and is non-generic, from Dave Marchevsky.
8) Enable libbpf's strict mode by default in bpftool and add a --legacy option as an
opt-out for more relaxed BPF program requirements, from Stanislav Fomichev.
9) Fix bpftool to use libbpf_get_error() to check for errors, from Hengqi Chen.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (72 commits)
bpftool: Use libbpf_get_error() to check error
bpftool: Fix mixed indentation in documentation
bpftool: Update the lists of names for maps and prog-attach types
bpftool: Fix indent in option lists in the documentation
bpftool: Remove inclusion of utilities.mak from Makefiles
bpftool: Fix memory leak in prog_dump()
selftests/bpf: Fix a tautological-constant-out-of-range-compare compiler warning
selftests/bpf: Fix an unused-but-set-variable compiler warning
bpf: Introduce btf_tracing_ids
bpf: Extend BTF_ID_LIST_GLOBAL with parameter for number of IDs
bpftool: Enable libbpf's strict mode by default
docs/bpf: Update documentation for BTF_KIND_TYPE_TAG support
selftests/bpf: Clarify llvm dependency with btf_tag selftest
selftests/bpf: Add a C test for btf_type_tag
selftests/bpf: Rename progs/tag.c to progs/btf_decl_tag.c
selftests/bpf: Test BTF_KIND_DECL_TAG for deduplication
selftests/bpf: Add BTF_KIND_TYPE_TAG unit tests
selftests/bpf: Test libbpf API function btf__add_type_tag()
bpftool: Support BTF_KIND_TYPE_TAG
libbpf: Support BTF_KIND_TYPE_TAG
...
====================
Link: https://lore.kernel.org/r/20211115162008.25916-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, LIBBPF_STRICT_ALL mode is enabled by default for
bpftool which means on error cases, some libbpf APIs would
return NULL pointers. This makes IS_ERR check failed to detect
such cases and result in segfault error. Use libbpf_get_error()
instead like we do in libbpf itself.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211115012436.3143318-1-hengqi.chen@gmail.com
|
|
Some paragraphs in bpftool's documentation have a mix of tabs and spaces
for indentation. Let's make it consistent.
This patch brings no change to the text content.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211110114632.24537-7-quentin@isovalent.com
|
|
To support the different BPF map or attach types, bpftool must remain
up-to-date with the types supported by the kernel. Let's update the
lists, by adding the missing Bloom filter map type and the perf_event
attach type.
Both missing items were found with test_bpftool_synctypes.py.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211110114632.24537-6-quentin@isovalent.com
|
|
Mixed indentation levels in the lists of options in bpftool's
documentation produces some unexpected results. For the "bpftool" man
page, it prints a warning:
$ make -C bpftool.8
GEN bpftool.8
<stdin>:26: (ERROR/3) Unexpected indentation.
For other pages, there is no warning, but it results in a line break
appearing in the option lists in the generated man pages.
RST paragraphs should have a uniform indentation level. Let's fix it.
Fixes: c07ba629df97 ("tools: bpftool: Update and synchronise option list in doc and help msg")
Fixes: 8cc8c6357c8f ("tools: bpftool: Document and add bash completion for -L, -B options")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211110114632.24537-5-quentin@isovalent.com
|
|
Bpftool's Makefile, and the Makefile for its documentation, both include
scripts/utilities.mak, but they use none of the items defined in this
file. Remove the includes.
Fixes: 71bb428fe2c1 ("tools: bpf: add bpftool")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211110114632.24537-3-quentin@isovalent.com
|
|
Following the extraction of prog_dump() from do_dump(), the struct btf
allocated in prog_dump() is no longer freed on error; the struct
bpf_prog_linfo is not freed at all. Make sure we release them before
exiting the function.
Fixes: ec2025095cf6 ("bpftool: Match several programs with same tag")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211110114632.24537-2-quentin@isovalent.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 static call update from Thomas Gleixner:
"A single fix for static calls to make the trampoline patching more
robust by placing explicit signature bytes after the call trampoline
to prevent patching random other jumps like the CFI jump table
entries"
* tag 'locking-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
static_call,x86: Robustify trampoline patching
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
"Hardware tracing:
- ARM:
* Print the size of the buffer size consistently in hexadecimal in
ARM Coresight.
* Add Coresight snapshot mode support.
* Update --switch-events docs in 'perf record'.
* Support hardware-based PID tracing.
* Track task context switch for cpu-mode events.
- Vendor events:
* Add metric events JSON file for power10 platform
perf test:
- Get 'perf test' unit tests closer to kunit.
- Topology tests improvements.
- Remove bashisms from some tests.
perf bench:
- Fix memory leak of perf_cpu_map__new() in the futex benchmarks.
libbpf:
- Add some more weak libbpf functions o allow building with the
libbpf versions, old ones, present in distros.
libbeauty:
- Translate [gs]setsockopt 'level' argument integer values to
strings.
tools headers UAPI:
- Sync futex_waitv, arch prctl, sound, i195_drm and msr-index files
with the kernel sources.
Documentation:
- Add documentation to 'struct symbol'.
- Synchronize the definition of enum perf_hw_id with code in
tools/perf/design.txt"
* tag 'perf-tools-for-v5.16-2021-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (67 commits)
perf tests: Remove bash constructs from stat_all_pmu.sh
perf tests: Remove bash construct from record+zstd_comp_decomp.sh
perf test: Remove bash construct from stat_bpf_counters.sh test
perf bench futex: Fix memory leak of perf_cpu_map__new()
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
tools headers UAPI: Sync sound/asound.h with the kernel sources
tools headers UAPI: Sync linux/prctl.h with the kernel sources
tools headers UAPI: Sync arch prctl headers with the kernel sources
perf tools: Add more weak libbpf functions
perf bpf: Avoid memory leak from perf_env__insert_btf()
perf symbols: Factor out annotation init/exit
perf symbols: Bit pack to save a byte
perf symbols: Add documentation to 'struct symbol'
tools headers UAPI: Sync files changed by new futex_waitv syscall
perf test bpf: Use ARRAY_CHECK() instead of ad-hoc equivalent, addressing array_size.cocci warning
perf arm-spe: Support hardware-based PID tracing
perf arm-spe: Save context ID in record
perf arm-spe: Update --switch-events docs in 'perf record'
perf arm-spe: Track task context switch for cpu-mode events
...
|
|
The tests were passing but without testing and were printing the
following:
$ ./perf test -v 90
90: perf all PMU test :
--- start ---
test child forked, pid 51650
Testing cpu/branch-instructions/
./tests/shell/stat_all_pmu.sh: 10: [:
Performance counter stats for 'true':
137,307 cpu/branch-instructions/
0.001686672 seconds time elapsed
0.001376000 seconds user
0.000000000 seconds sys: unexpected operator
Changing the regexes to a grep works in sh and prints this:
$ ./perf test -v 90
90: perf all PMU test :
--- start ---
test child forked, pid 60186
[...]
Testing tlb_flush.stlb_any
test child finished with 0
---- end ----
perf all PMU test: Ok
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/20211028134828.65774-4-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Commit 463538a383a2 ("perf tests: Fix test 68 zstd compression for
s390") inadvertently removed the -g flag from all platforms rather than
just s390, because the [[ ]] construct fails in sh. Changing to single
brackets restores testing of call graphs and removes the following error
from the output:
$ ./perf test -v 85
85: Zstd perf.data compression/decompression :
--- start ---
test child forked, pid 50643
Collecting compressed record file:
./tests/shell/record+zstd_comp_decomp.sh: 15: [[: not found
Fixes: 463538a383a2 ("perf tests: Fix test 68 zstd compression for s390")
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/20211028134828.65774-3-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently the test skips with an error because == only works in bash:
$ ./perf test 91 -v
Couldn't bump rlimit(MEMLOCK), failures may take place when creating BPF maps, etc
91: perf stat --bpf-counters test :
--- start ---
test child forked, pid 44586
./tests/shell/stat_bpf_counters.sh: 26: [: -v: unexpected operator
test child finished with -2
---- end ----
perf stat --bpf-counters test: Skip
Changing == to = does the same thing, but doesn't result in an error:
./perf test 91 -v
Couldn't bump rlimit(MEMLOCK), failures may take place when creating BPF maps, etc
91: perf stat --bpf-counters test :
--- start ---
test child forked, pid 45833
Skipping: --bpf-counters not supported
Error: unknown option `bpf-counters'
[...]
test child finished with -2
---- end ----
perf stat --bpf-counters test: Skip
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/20211028134828.65774-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
ASan reports memory leaks while running:
$ sudo ./perf bench futex all
The leaks are caused by perf_cpu_map__new not being freed.
This patch adds the missing perf_cpu_map__put since it calls
cpu_map_delete implicitly.
Fixes: 9c3516d1b850ea93 ("libperf: Add perf_cpu_map__new()/perf_cpu_map__read() functions")
Signed-off-by: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/20211112201134.77892-1-sohaib.amhmd@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up the changes in:
dae1bd58389615d4 ("x86/msr-index: Add MSRs for XFD")
Addressing these tools/perf build warnings:
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'
That makes the beautification scripts to pick some new entries:
$ diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
--- tools/arch/x86/include/asm/msr-index.h 2021-07-15 16:17:01.819817827 -0300
+++ arch/x86/include/asm/msr-index.h 2021-11-06 15:49:33.738517311 -0300
@@ -625,6 +625,8 @@
#define MSR_IA32_BNDCFGS_RSVD 0x00000ffc
+#define MSR_IA32_XFD 0x000001c4
+#define MSR_IA32_XFD_ERR 0x000001c5
#define MSR_IA32_XSS 0x00000da0
#define MSR_IA32_APICBASE 0x0000001b
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > /tmp/before
$ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > /tmp/after
$ diff -u /tmp/before /tmp/after
--- /tmp/before 2021-11-13 11:10:39.964201505 -0300
+++ /tmp/after 2021-11-13 11:10:47.902410873 -0300
@@ -93,6 +93,8 @@
[0x000001b0] = "IA32_ENERGY_PERF_BIAS",
[0x000001b1] = "IA32_PACKAGE_THERM_STATUS",
[0x000001b2] = "IA32_PACKAGE_THERM_INTERRUPT",
+ [0x000001c4] = "IA32_XFD",
+ [0x000001c5] = "IA32_XFD_ERR",
[0x000001c8] = "LBR_SELECT",
[0x000001c9] = "LBR_TOS",
[0x000001d9] = "IA32_DEBUGCTLMSR",
$
And this gets rebuilt:
CC /tmp/build/perf/trace/beauty/tracepoints/x86_msr.o
INSTALL trace_plugins
LD /tmp/build/perf/trace/beauty/tracepoints/perf-in.o
LD /tmp/build/perf/trace/beauty/perf-in.o
LD /tmp/build/perf/perf-in.o
LINK /tmp/build/perf/perf
Now one can trace systemwide asking to see backtraces to where those
MSRs are being read/written with:
# perf trace -e msr:*_msr/max-stack=32/ --filter="msr==IA32_XFD || msr==IA32_XFD_ERR"
^C#
#
If we use -v (verbose mode) we can see what it does behind the scenes:
# perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr==IA32_XFD || msr==IA32_XFD_ERR"
<SNIP>
New filter for msr:read_msr: (msr==0x1c4 || msr==0x1c5) && (common_pid != 4448951 && common_pid != 8781)
New filter for msr:write_msr: (msr==0x1c4 || msr==0x1c5) && (common_pid != 4448951 && common_pid != 8781)
<SNIP>
^C#
Example with a frequent msr:
# perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr==IA32_SPEC_CTRL" --max-events 2
Using CPUID AuthenticAMD-25-21-0
0x48
New filter for msr:read_msr: (msr==0x48) && (common_pid != 3738351 && common_pid != 3564)
0x48
New filter for msr:write_msr: (msr==0x48) && (common_pid != 3738351 && common_pid != 3564)
mmap size 528384B
Looking at the vmlinux_path (8 entries long)
symsrc__init: build id mismatch for vmlinux.
Using /proc/kcore for kernel data
Using /proc/kallsyms for symbols
0.000 pipewire/2479 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6)
do_trace_write_msr ([kernel.kallsyms])
do_trace_write_msr ([kernel.kallsyms])
__switch_to_xtra ([kernel.kallsyms])
__switch_to ([kernel.kallsyms])
__schedule ([kernel.kallsyms])
schedule ([kernel.kallsyms])
schedule_hrtimeout_range_clock ([kernel.kallsyms])
do_epoll_wait ([kernel.kallsyms])
__x64_sys_epoll_wait ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
entry_SYSCALL_64_after_hwframe ([kernel.kallsyms])
epoll_wait (/usr/lib64/libc-2.33.so)
[0x76c4] (/usr/lib64/spa-0.2/support/libspa-support.so)
[0x4cf0] (/usr/lib64/spa-0.2/support/libspa-support.so)
0.027 :0/0 msr:write_msr(msr: IA32_SPEC_CTRL, val: 2)
do_trace_write_msr ([kernel.kallsyms])
do_trace_write_msr ([kernel.kallsyms])
__switch_to_xtra ([kernel.kallsyms])
__switch_to ([kernel.kallsyms])
__schedule ([kernel.kallsyms])
schedule_idle ([kernel.kallsyms])
do_idle ([kernel.kallsyms])
cpu_startup_entry ([kernel.kallsyms])
start_kernel ([kernel.kallsyms])
secondary_startup_64_no_verify ([kernel.kallsyms])
#
Cc: Borislav Petkov <bp@suse.de>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/YY%2FJdb6on7swsn+C@kernel.org/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up the changes in:
e5e32171a2cf1e43 ("drm/i915/guc: Connect UAPI to GuC multi-lrc interface")
9409eb35942713d0 ("drm/i915: Expose logical engine instance to user")
ea673f17ab763879 ("drm/i915/uapi: Add comment clarifying purpose of I915_TILING_* values")
d3ac8d42168a9be7 ("drm/i915/pxp: interfaces for using protected objects")
cbbd3764b2399ad8 ("drm/i915/pxp: Create the arbitrary session after boot")
That don't add any new ioctl, so no changes in tooling.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Huang, Sean Z <sean.z.huang@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up the changes in:
5aec579e08e4f2be ("ALSA: uapi: Fix a C++ style comment in asound.h")
That is just changing a // style comment to /* */.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/sound/asound.h' differs from latest version at 'include/uapi/sound/asound.h'
diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes in:
61bc346ce64a3864 ("uapi/linux/prctl: provide macro definitions for the PR_SCHED_CORE type argument")
That don't result in any changes in tooling:
$ tools/perf/trace/beauty/prctl_option.sh > before
$ cp include/uapi/linux/prctl.h tools/include/uapi/linux/prctl.h
$ tools/perf/trace/beauty/prctl_option.sh > after
$ diff -u before after
$
Just silences this perf tools build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/prctl.h' differs from latest version at 'include/uapi/linux/prctl.h'
diff -u tools/include/uapi/linux/prctl.h include/uapi/linux/prctl.h
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Eugene Syromiatnikov <esyr@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes in this cset:
db8268df0983adc2 ("x86/arch_prctl: Add controls for dynamic XSTATE components")
This picks these new prctls:
$ tools/perf/trace/beauty/x86_arch_prctl.sh > /tmp/before
$ cp arch/x86/include/uapi/asm/prctl.h tools/arch/x86/include/uapi/asm/prctl.h
$ tools/perf/trace/beauty/x86_arch_prctl.sh > /tmp/after
$ diff -u /tmp/before /tmp/after
--- /tmp/before 2021-11-13 10:42:52.787308809 -0300
+++ /tmp/after 2021-11-13 10:43:02.295558837 -0300
@@ -6,6 +6,9 @@
[0x1004 - 0x1001]= "GET_GS",
[0x1011 - 0x1001]= "GET_CPUID",
[0x1012 - 0x1001]= "SET_CPUID",
+ [0x1021 - 0x1001]= "GET_XCOMP_SUPP",
+ [0x1022 - 0x1001]= "GET_XCOMP_PERM",
+ [0x1023 - 0x1001]= "REQ_XCOMP_PERM",
};
#define x86_arch_prctl_codes_2_offset 0x2001
$
With this 'perf trace' can translate those numbers into strings and use
the strings in filter expressions:
# perf trace -e prctl
0.000 ( 0.011 ms): DOM Worker/3722622 prctl(option: SET_NAME, arg2: 0x7f9c014b7df5) = 0
0.032 ( 0.002 ms): DOM Worker/3722622 prctl(option: SET_NAME, arg2: 0x7f9bb6b51580) = 0
5.452 ( 0.003 ms): StreamT~ns #30/3722623 prctl(option: SET_NAME, arg2: 0x7f9bdbdfeb70) = 0
5.468 ( 0.002 ms): StreamT~ns #30/3722623 prctl(option: SET_NAME, arg2: 0x7f9bdbdfea70) = 0
24.494 ( 0.009 ms): IndexedDB #556/3722624 prctl(option: SET_NAME, arg2: 0x7f562a32ae28) = 0
24.540 ( 0.002 ms): IndexedDB #556/3722624 prctl(option: SET_NAME, arg2: 0x7f563c6d4b30) = 0
670.281 ( 0.008 ms): systemd-userwo/3722339 prctl(option: SET_NAME, arg2: 0x564be30805c8) = 0
670.293 ( 0.002 ms): systemd-userwo/3722339 prctl(option: SET_NAME, arg2: 0x564be30800f0) = 0
^C#
This addresses these perf build warnings:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/prctl.h' differs from latest version at 'arch/x86/include/uapi/asm/prctl.h'
diff -u tools/arch/x86/include/uapi/asm/prctl.h arch/x86/include/uapi/asm/prctl.h
Cc: Borislav Petkov <bp@suse.de>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/YY%2FER104k852WOTK@kernel.org/T/#u
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We hit the window where perf uses libbpf functions, that did not make it
to the official libbpf release yet and it's breaking perf build with
dynamicly linked libbpf.
Fixing this by providing the new interface as weak functions which calls
the original libbpf functions. Fortunatelly the changes were just
renames.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20211109140707.1689940-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
perf_env__insert_btf() doesn't insert if a duplicate BTF id is
encountered and this causes a memory leak. Modify the function to return
a success/error value and then free the memory if insertion didn't
happen.
v2. Adds a return -1 when the insertion error occurs in
perf_env__fetch_btf. This doesn't affect anything as the result is
never checked.
Fixes: 3792cb2ff43b1b19 ("perf bpf: Save BTF in a rbtree in perf_env")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20211112074525.121633-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The exit function fixes a memory leak with the src field as detected by
leak sanitizer. An example of which is:
Indirect leak of 25133184 byte(s) in 207 object(s) allocated from:
#0 0x7f199ecfe987 in __interceptor_calloc libsanitizer/asan/asan_malloc_linux.cpp:154
#1 0x55defe638224 in annotated_source__alloc_histograms util/annotate.c:803
#2 0x55defe6397e4 in symbol__hists util/annotate.c:952
#3 0x55defe639908 in symbol__inc_addr_samples util/annotate.c:968
#4 0x55defe63aa29 in hist_entry__inc_addr_samples util/annotate.c:1119
#5 0x55defe499a79 in hist_iter__report_callback tools/perf/builtin-report.c:182
#6 0x55defe7a859d in hist_entry_iter__add util/hist.c:1236
#7 0x55defe49aa63 in process_sample_event tools/perf/builtin-report.c:315
#8 0x55defe731bc8 in evlist__deliver_sample util/session.c:1473
#9 0x55defe731e38 in machines__deliver_event util/session.c:1510
#10 0x55defe732a23 in perf_session__deliver_event util/session.c:1590
#11 0x55defe72951e in ordered_events__deliver_event util/session.c:183
#12 0x55defe740082 in do_flush util/ordered-events.c:244
#13 0x55defe7407cb in __ordered_events__flush util/ordered-events.c:323
#14 0x55defe740a61 in ordered_events__flush util/ordered-events.c:341
#15 0x55defe73837f in __perf_session__process_events util/session.c:2390
#16 0x55defe7385ff in perf_session__process_events util/session.c:2420
...
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211112035124.94327-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Use a bit field alongside the earlier bit fields.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211112035124.94327-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|