summaryrefslogtreecommitdiffstats
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2018-03-04Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds1-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86/pti fixes from Thomas Gleixner: "Three fixes related to melted spectrum: - Sync the cpu_entry_area page table to initial_page_table on 32 bit. Otherwise suspend/resume fails because resume uses initial_page_table and triggers a triple fault when accessing the cpu entry area. - Zero the SPEC_CTL MRS on XEN before suspend to address a shortcoming in the hypervisor. - Fix another switch table detection issue in objtool" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu_entry_area: Sync cpu_entry_area to initial_page_table objtool: Fix another switch table detection issue x86/xen: Zero MSR_IA32_SPEC_CTRL before suspend
2018-02-28Merge tag 'linux-kselftest-4.16-rc4' of ↵Linus Torvalds8-16/+19
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "Fixes for various problems in test output, compile errors, and missing configs" * tag 'linux-kselftest-4.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: vm: update .gitignore with new test selftests: memory-hotplug: silence test command echo selftests/futex: Fix line continuation in Makefile selftests: memfd: add config fragment for fuse selftests: pstore: Adding config fragment CONFIG_PSTORE_RAM=m selftests/android: Fix line continuation in Makefile selftest/vDSO: fix O= selftests: sync: missing CFLAGS while compiling
2018-02-28objtool: Fix another switch table detection issueJosh Poimboeuf1-1/+5
Continue the switch table detection whack-a-mole. Add a check to distinguish KASAN data reads from switch data reads. The switch jump tables in .rodata have relocations associated with them. This fixes the following warning: crypto/asymmetric_keys/x509_cert_parser.o: warning: objtool: x509_note_pkey_algo()+0xa4: sibling call from callable instruction with modified stack frame Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Arnd Bergmann <arnd@arndb.de> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/d7c8853022ad47d158cb81e953a40469fc08a95e.1519784382.git.jpoimboe@redhat.com
2018-02-26selftests: vm: update .gitignore with new testShuah Khan1-0/+1
Update .gitignore with new test. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2018-02-26selftests: memory-hotplug: silence test command echoShuah Khan1-1/+1
Silence the following command being printed while running test. ./mem-on-off-test.sh -r 2 && echo "selftests: memory-hotplug [PASS]" || echo "selftests: memory-hotplug [FAIL]" Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2018-02-26selftests/futex: Fix line continuation in MakefileDaniel Díaz1-3/+3
The Makefile lacks a couple of line continuation backslashes in an `if' clause, which produces an error when make versions prior to 4.x are used for building the tests. $ make make[1]: Entering directory `/[...]/linux/tools/testing/selftests/futex' /bin/sh: -c: line 5: syntax error: unexpected end of file make[1]: *** [all] Error 1 make[1]: Leaving directory `/[...]/linux/tools/testing/selftests/futex' make: *** [all] Error 2 Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2018-02-26Merge branch 'idr-2018-02-06' of git://git.infradead.org/users/willy/linux-daxLinus Torvalds5-2/+68
Pull idr fixes from Matthew Wilcox: "One test-suite build fix for you and one run-time regression fix. The regression fix includes new tests to make sure they don't pop back up." * 'idr-2018-02-06' of git://git.infradead.org/users/willy/linux-dax: idr: Fix handling of IDs above INT_MAX radix tree test suite: Fix build
2018-02-26idr: Fix handling of IDs above INT_MAXMatthew Wilcox1-0/+52
Khalid reported that the kernel selftests are currently failing: selftests: test_bpf.sh ======================================== test_bpf: [FAIL] not ok 1..8 selftests: test_bpf.sh [FAIL] He bisected it to 6ce711f2750031d12cec91384ac5cfa0a485b60a ("idr: Make 1-based IDRs more efficient"). The root cause is doing a signed comparison in idr_alloc_u32() instead of an unsigned comparison. I went looking for any similar problems and found a couple (which would each result in the failure to warn in two situations that aren't supposed to happen). I knocked up a few test-cases to prove that I was right and added them to the test-suite. Reported-by: Khalid Aziz <khalid.aziz@oracle.com> Tested-by: Khalid Aziz <khalid.aziz@oracle.com> Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
2018-02-26Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds5-12/+108
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "Yet another pile of melted spectrum related changes: - sanitize the array_index_nospec protection mechanism: Remove the overengineered array_index_nospec_mask_check() magic and allow const-qualified types as index to avoid temporary storage in a non-const local variable. - make the microcode loader more robust by properly propagating error codes. Provide information about new feature bits after micro code was updated so administrators can act upon. - optimizations of the entry ASM code which reduce code footprint and make the code simpler and faster. - fix the {pmd,pud}_{set,clear}_flags() implementations to work properly on paravirt kernels by removing the address translation operations. - revert the harmful vmexit_fill_RSB() optimization - use IBRS around firmware calls - teach objtool about retpolines and add annotations for indirect jumps and calls. - explicitly disable jumplabel patching in __init code and handle patching failures properly instead of silently ignoring them. - remove indirect paravirt calls for writing the speculation control MSR as these calls are obviously proving the same attack vector which is tried to be mitigated. - a few small fixes which address build issues with recent compiler and assembler versions" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits) KVM/VMX: Optimize vmx_vcpu_run() and svm_vcpu_run() by marking the RDMSR path as unlikely() KVM/x86: Remove indirect MSR op calls from SPEC_CTRL objtool, retpolines: Integrate objtool with retpoline support more closely x86/entry/64: Simplify ENCODE_FRAME_POINTER extable: Make init_kernel_text() global jump_label: Warn on failed jump_label patching attempt jump_label: Explicitly disable jump labels in __init code x86/entry/64: Open-code switch_to_thread_stack() x86/entry/64: Move ASM_CLAC to interrupt_entry() x86/entry/64: Remove 'interrupt' macro x86/entry/64: Move the switch_to_thread_stack() call to interrupt_entry() x86/entry/64: Move ENTER_IRQ_STACK from interrupt macro to interrupt_entry x86/entry/64: Move PUSH_AND_CLEAR_REGS from interrupt macro to helper function x86/speculation: Move firmware_restrict_branch_speculation_*() from C to CPP objtool: Add module specific retpoline rules objtool: Add retpoline validation objtool: Use existing global variables for options x86/mm/sme, objtool: Annotate indirect call in sme_encrypt_execute() x86/boot, objtool: Annotate indirect jump in secondary_startup_64() x86/paravirt, objtool: Annotate indirect calls ...
2018-02-26Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-220/+287
Pull KVM fixes from Paolo Bonzini: "s390: - optimization for the exitless interrupt support that was merged in 4.16-rc1 - improve the branch prediction blocking for nested KVM - replace some jump tables with switch statements to improve expoline performance - fixes for multiple epoch facility ARM: - fix the interaction of userspace irqchip VMs with in-kernel irqchip VMs - make sure we can build 32-bit KVM/ARM with gcc-8. x86: - fixes for AMD SEV - fixes for Intel nested VMX, emulated UMIP and a dump_stack() on VM startup - fixes for async page fault migration - small optimization to PV TLB flush (new in 4.16-rc1) - syzkaller fixes Generic: - compiler warning fixes - syzkaller fixes - more improvements to the kvm_stat tool Two more small Spectre fixes are going to reach you via Ingo" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (40 commits) KVM: SVM: Fix SEV LAUNCH_SECRET command KVM: SVM: install RSM intercept KVM: SVM: no need to call access_ok() in LAUNCH_MEASURE command include: psp-sev: Capitalize invalid length enum crypto: ccp: Fix sparse, use plain integer as NULL pointer KVM: X86: Avoid traversing all the cpus for pv tlb flush when steal time is disabled x86/kvm: Make parse_no_xxx __init for kvm KVM: x86: fix backward migration with async_PF kvm: fix warning for non-x86 builds kvm: fix warning for CONFIG_HAVE_KVM_EVENTFD builds tools/kvm_stat: print 'Total' line for multiple events only tools/kvm_stat: group child events indented after parent tools/kvm_stat: separate drilldown and fields filtering tools/kvm_stat: eliminate extra guest/pid selection dialog tools/kvm_stat: mark private methods as such tools/kvm_stat: fix debugfs handling tools/kvm_stat: print error on invalid regex tools/kvm_stat: fix crash when filtering out all non-child trace events tools/kvm_stat: avoid 'is' for equality checks tools/kvm_stat: use a more pythonic way to iterate over dictionaries ...
2018-02-25radix tree test suite: Fix buildMatthew Wilcox4-2/+16
- Add an empty linux/compiler_types.h (now being included by kconfig.h) - Add __GFP_ZERO - Add kzalloc - Test __GFP_DIRECT_RECLAIM instead of __GFP_NOWARN Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
2018-02-24tools/kvm_stat: print 'Total' line for multiple events onlyStefan Raspl1-1/+1
The 'Total' line looks a bit weird when we have a single event only. This can happen e.g. due to filters. Therefore suppress when there's only a single event in the output. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24tools/kvm_stat: group child events indented after parentStefan Raspl1-30/+59
We keep the current logic that sorts all events (parent and child), but re-shuffle the events afterwards, grouping the children after the respective parent. Note that the percentage column for child events gives the percentage of the parent's total. Since we rework the logic anyway, we modify the total average calculation to use the raw numbers instead of the (rounded) averages. Note that this can result in differing numbers (between total average and the sum of the individual averages) due to rounding errors. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24tools/kvm_stat: separate drilldown and fields filteringStefan Raspl1-43/+100
Drilldown (i.e. toggle display of child trace events) was implemented by overriding the fields filter. This resulted in inconsistencies: E.g. when drilldown was not active, adding a filter that also matches child trace events would not only filter fields according to the filter, but also add in the child trace events matching the filter. E.g. on x86, setting 'kvm_userspace_exit' as the fields filter after startup would result in display of kvm_userspace_exit(DCR), although that wasn't previously present - not exactly what one would expect from a filter. This patch addresses the issue by keeping drilldown and fields filter separate. While at it, we also fix a PEP8 issue by adding a blank line at one place (since we're in the area...). We implement this by adding a framework that also allows to define a taxonomy among the debugfs events to identify child trace events. I.e. drilldown using 'x' can now also work with debugfs. A respective parent- child relationship is only known for S390 at the moment, but could be added adjusting other platforms' ARCH.dbg_is_child() methods accordingly. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24tools/kvm_stat: eliminate extra guest/pid selection dialogStefan Raspl2-75/+39
We can do with a single dialog that takes both, pids and guest names. Note that we keep both interactive commands, 'p' and 'g' for now, to avoid confusion among users used to a specific key. While at it, we improve on some minor glitches regarding curses usage, e.g. cursor still visible when not supposed to be. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24tools/kvm_stat: mark private methods as suchStefan Raspl1-66/+66
Helps quite a bit reading the code when it's obvious when a method is intended for internal use only. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24tools/kvm_stat: fix debugfs handlingStefan Raspl1-14/+26
Te checks for debugfs assumed that debugfs is always mounted at /sys/kernel/debug - which is likely, but not guaranteed. This is addressed by checking /proc/mounts for the actual location. Furthermore, when debugfs was mounted, but the kvm module not loaded, a misleading error pointing towards debugfs not present was given. To reproduce, (a) run kvm_stat with debugfs mounted at a place different from /sys/kernel/debug (b) run kvm_stat with debugfs mounted but kvm module not loaded Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24tools/kvm_stat: print error on invalid regexStefan Raspl1-0/+3
Entering an invalid regular expression did not produce any indication of an error so far. To reproduce, press 'f' and enter 'foo(' (with an unescaped bracket). Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24tools/kvm_stat: fix crash when filtering out all non-child trace eventsStefan Raspl1-0/+6
When we apply a filter that will only leave child trace events, we receive a ZeroDivisionError when calculating the percentages. In that case, provide percentages based on child events only. To reproduce, run 'kvm_stat -f .*[\(].*'. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24tools/kvm_stat: avoid 'is' for equality checksMarc Hartmayer1-2/+2
Use '==' for equality checks and 'is' when comparing identities. An example where '==' and 'is' behave differently: >>> a = 4242 >>> a == 4242 True >>> a is 4242 False Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24tools/kvm_stat: use a more pythonic way to iterate over dictionariesMarc Hartmayer1-8/+8
If it's clear that the values of a dictionary will be used then use the '.items()' method. Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Tested-by: Stefan Raspl <raspl@linux.vnet.ibm.com> [Include fix for logging mode by Stefan Raspl] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24tools/kvm_stat: use a namedtuple for storing the valuesMarc Hartmayer1-12/+15
Use a namedtuple for storing the values as it allows to access the fields of a tuple via names. This makes the overall code much easier to read and to understand. Access by index is still possible as before. Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Tested-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24tools/kvm_stat: simplify the sortkey functionMarc Hartmayer1-15/+8
The 'sortkey' function references a value in its enclosing scope (closure). This is not common practice for a sort key function so let's replace it. Additionally, the function 'sorted' has already a parameter for reversing the result therefore the inversion of the values is unneeded. The check for stats[x][1] is also superfluous as it's ensured that this value is initialized with 0. Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Tested-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds7-4/+36
Pull networking fixes from David Miller: 1) Fix TTL offset calculation in mac80211 mesh code, from Peter Oh. 2) Fix races with procfs in ipt_CLUSTERIP, from Cong Wang. 3) Memory leak fix in lpm_trie BPF map code, from Yonghong Song. 4) Need to use GFP_ATOMIC in BPF cpumap allocations, from Jason Wang. 5) Fix potential deadlocks in netfilter getsockopt() code paths, from Paolo Abeni. 6) Netfilter stackpointer size checks really are needed to validate user input, from Florian Westphal. 7) Missing timer init in x_tables, from Paolo Abeni. 8) Don't use WQ_MEM_RECLAIM in mac80211 hwsim, from Johannes Berg. 9) When an ibmvnic device is brought down then back up again, it can be sent queue entries from a previous session, handle this properly instead of crashing. From Thomas Falcon. 10) Fix TCP checksum on LRO buffers in mlx5e, from Gal Pressman. 11) When we are dumping filters in cls_api, the output SKB is empty, and the filter we are dumping is too large for the space in the SKB, we should return -EMSGSIZE like other netlink dump operations do. Otherwise userland has no signal that is needs to increase the size of its read buffer. From Roman Kapl. 12) Several XDP fixes for virtio_net, from Jesper Dangaard Brouer. 13) Module refcount leak in netlink when a dump start fails, from Jason Donenfeld. 14) Handle sub-optimal GSO sizes better in TCP BBR congestion control, from Eric Dumazet. 15) Releasing bpf per-cpu arraymaps can take a long time, add a condtional scheduling point. From Eric Dumazet. 16) Implement retpolines for tail calls in x64 and arm64 bpf JITs. From Daniel Borkmann. 17) Fix page leak in gianfar driver, from Andy Spencer. 18) Missed clearing of estimator scratch buffer, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits) net_sched: gen_estimator: fix broken estimators based on percpu stats gianfar: simplify FCS handling and fix memory leak ipv6 sit: work around bogus gcc-8 -Wrestrict warning macvlan: fix use-after-free in macvlan_common_newlink() bpf, arm64: fix out of bounds access in tail call bpf, x64: implement retpoline for tail call rxrpc: Fix send in rxrpc_send_data_packet() net: aquantia: Fix error handling in aq_pci_probe() bpf: fix rcu lockdep warning for lpm_trie map_free callback bpf: add schedule points in percpu arrays management regulatory: add NUL to request alpha2 ibmvnic: Fix early release of login buffer net/smc9194: Remove bogus CONFIG_MAC reference net: ipv4: Set addr_type in hash_keys for forwarded case tcp_bbr: better deal with suboptimal GSO smsc75xx: fix smsc75xx_set_features() netlink: put module reference if dump start fails selftests/bpf/test_maps: exit child process without error in ENOMEM case selftests/bpf: update gitignore with test_libbpf_open selftests/bpf: tcpbpf_kern: use in6_* macros from glibc ..
2018-02-23Merge branch 'fixes-v4.16-rc3' of ↵Linus Torvalds1-0/+61
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem fixes from James Morris: - keys fixes via David Howells: "A collection of fixes for Linux keyrings, mostly thanks to Eric Biggers: - Fix some PKCS#7 verification issues. - Fix handling of unsupported crypto in X.509. - Fix too-large allocation in big_key" - Seccomp updates via Kees Cook: "These are fixes for the get_metadata interface that landed during -rc1. While the new selftest is strictly not a bug fix, I think it's in the same spirit of avoiding bugs" - an IMA build fix from Randy Dunlap * 'fixes-v4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: integrity/security: fix digsig.c build error with header file KEYS: Use individual pages in big_key for crypto buffers X.509: fix NULL dereference when restricting key with unsupported_sig X.509: fix BUG_ON() when hash algorithm is unsupported PKCS#7: fix direct verification of SignerInfo signature PKCS#7: fix certificate blacklisting PKCS#7: fix certificate chain verification seccomp: add a selftest for get_metadata ptrace, seccomp: tweak get_metadata behavior slightly seccomp, ptrace: switch get_metadata types to arch independent
2018-02-22bpf, arm64: fix out of bounds access in tail callDaniel Borkmann1-0/+26
I recently noticed a crash on arm64 when feeding a bogus index into BPF tail call helper. The crash would not occur when the interpreter is used, but only in case of JIT. Output looks as follows: [ 347.007486] Unable to handle kernel paging request at virtual address fffb850e96492510 [...] [ 347.043065] [fffb850e96492510] address between user and kernel address ranges [ 347.050205] Internal error: Oops: 96000004 [#1] SMP [...] [ 347.190829] x13: 0000000000000000 x12: 0000000000000000 [ 347.196128] x11: fffc047ebe782800 x10: ffff808fd7d0fd10 [ 347.201427] x9 : 0000000000000000 x8 : 0000000000000000 [ 347.206726] x7 : 0000000000000000 x6 : 001c991738000000 [ 347.212025] x5 : 0000000000000018 x4 : 000000000000ba5a [ 347.217325] x3 : 00000000000329c4 x2 : ffff808fd7cf0500 [ 347.222625] x1 : ffff808fd7d0fc00 x0 : ffff808fd7cf0500 [ 347.227926] Process test_verifier (pid: 4548, stack limit = 0x000000007467fa61) [ 347.235221] Call trace: [ 347.237656] 0xffff000002f3a4fc [ 347.240784] bpf_test_run+0x78/0xf8 [ 347.244260] bpf_prog_test_run_skb+0x148/0x230 [ 347.248694] SyS_bpf+0x77c/0x1110 [ 347.251999] el0_svc_naked+0x30/0x34 [ 347.255564] Code: 9100075a d280220a 8b0a002a d37df04b (f86b694b) [...] In this case the index used in BPF r3 is the same as in r1 at the time of the call, meaning we fed a pointer as index; here, it had the value 0xffff808fd7cf0500 which sits in x2. While I found tail calls to be working in general (also for hitting the error cases), I noticed the following in the code emission: # bpftool p d j i 988 [...] 38: ldr w10, [x1,x10] 3c: cmp w2, w10 40: b.ge 0x000000000000007c <-- signed cmp 44: mov x10, #0x20 // #32 48: cmp x26, x10 4c: b.gt 0x000000000000007c 50: add x26, x26, #0x1 54: mov x10, #0x110 // #272 58: add x10, x1, x10 5c: lsl x11, x2, #3 60: ldr x11, [x10,x11] <-- faulting insn (f86b694b) 64: cbz x11, 0x000000000000007c [...] Meaning, the tests passed because commit ddb55992b04d ("arm64: bpf: implement bpf_tail_call() helper") was using signed compares instead of unsigned which as a result had the test wrongly passing. Change this but also the tail call count test both into unsigned and cap the index as u32. Latter we did as well in 90caccdd8cc0 ("bpf: fix bpf_tail_call() x64 JIT") and is needed in addition here, too. Tested on HiSilicon Hi1616. Result after patch: # bpftool p d j i 268 [...] 38: ldr w10, [x1,x10] 3c: add w2, w2, #0x0 40: cmp w2, w10 44: b.cs 0x0000000000000080 48: mov x10, #0x20 // #32 4c: cmp x26, x10 50: b.hi 0x0000000000000080 54: add x26, x26, #0x1 58: mov x10, #0x110 // #272 5c: add x10, x1, x10 60: lsl x11, x2, #3 64: ldr x11, [x10,x11] 68: cbz x11, 0x0000000000000080 [...] Fixes: ddb55992b04d ("arm64: bpf: implement bpf_tail_call() helper") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-02-22Merge tag 'seccomp-v4.16-rc3' of ↵James Morris1-0/+61
https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux into fixes-v4.16-rc3 - Fix seccomp GET_METADATA to deal with field sizes correctly (Tycho Andersen) - Add selftest to make sure GET_METADATA doesn't regress (Tycho Andersen)
2018-02-22selftests/bpf/test_maps: exit child process without error in ENOMEM caseLi Zhijian1-0/+2
test_maps contains a series of stress tests, and previously it will break the rest tests when it failed to alloc memory. ----------------------- Failed to create hashmap key=8 value=262144 'Cannot allocate memory' Failed to create hashmap key=16 value=262144 'Cannot allocate memory' Failed to create hashmap key=8 value=262144 'Cannot allocate memory' Failed to create hashmap key=8 value=262144 'Cannot allocate memory' test_maps: test_maps.c:955: run_parallel: Assertion `status == 0' failed. Aborted not ok 1..3 selftests: test_maps [FAIL] ----------------------- after this patch, the rest tests will be continue when it occurs an ENOMEM failure CC: Alexei Starovoitov <alexei.starovoitov@gmail.com> CC: Philip Li <philip.li@intel.com> Suggested-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Li Zhijian <zhijianx.li@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-02-21seccomp: add a selftest for get_metadataTycho Andersen1-0/+61
Let's test that we get the flags correctly, and that we preserve the filter index across the ptrace(PTRACE_SECCOMP_GET_METADATA) correctly. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-02-22selftests/bpf: update gitignore with test_libbpf_openAnders Roxell1-0/+1
bpf builds a test program for loading BPF ELF files. Add the executable to the .gitignore list. Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Tested-by: Daniel Díaz <daniel.diaz@linaro.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-02-22selftests/bpf: tcpbpf_kern: use in6_* macros from glibcAnders Roxell1-1/+0
Both glibc and the kernel have in6_* macros definitions. Build fails because it picks up wrong in6_* macro from the kernel header and not the header from glibc. Fixes build error below: clang -I. -I./include/uapi -I../../../include/uapi -Wno-compare-distinct-pointer-types \ -O2 -target bpf -emit-llvm -c test_tcpbpf_kern.c -o - | \ llc -march=bpf -mcpu=generic -filetype=obj -o .../tools/testing/selftests/bpf/test_tcpbpf_kern.o In file included from test_tcpbpf_kern.c:12: .../netinet/in.h:101:5: error: expected identifier IPPROTO_HOPOPTS = 0, /* IPv6 Hop-by-Hop options. */ ^ .../linux/in6.h:131:26: note: expanded from macro 'IPPROTO_HOPOPTS' ^ In file included from test_tcpbpf_kern.c:12: /usr/include/netinet/in.h:103:5: error: expected identifier IPPROTO_ROUTING = 43, /* IPv6 routing header. */ ^ .../linux/in6.h:132:26: note: expanded from macro 'IPPROTO_ROUTING' ^ In file included from test_tcpbpf_kern.c:12: .../netinet/in.h:105:5: error: expected identifier IPPROTO_FRAGMENT = 44, /* IPv6 fragmentation header. */ ^ Since both glibc and the kernel have in6_* macros definitions, use the one from glibc. Kernel headers will check for previous libc definitions by including include/linux/libc-compat.h. Reported-by: Daniel Díaz <daniel.diaz@linaro.org> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Tested-by: Daniel Díaz <daniel.diaz@linaro.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-02-21selftests/memfd: add run_fuse_test.sh to TEST_FILESAnders Roxell1-0/+1
While testing memfd tests, there is a missing script, as reported by kselftest: ./run_tests.sh: line 7: ./run_fuse_test.sh: No such file or directory Link: http://lkml.kernel.org/r/1517955779-11386-1-git-send-email-daniel.diaz@linaro.org Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-21tools: fix cross-compile var clobberingMartin Kelly13-22/+18
Currently a number of Makefiles break when used with toolchains that pass extra flags in CC and other cross-compile related variables (such as --sysroot). Thus we get this error when we use a toolchain that puts --sysroot in the CC var: ~/src/linux/tools$ make iio [snip] iio_event_monitor.c:18:10: fatal error: unistd.h: No such file or directory #include <unistd.h> ^~~~~~~~~~ This occurs because we clobber several env vars related to cross-compiling with lines like this: CC = $(CROSS_COMPILE)gcc Although this will point to a valid cross-compiler, we lose any extra flags that might exist in the CC variable, which can break toolchains that rely on them (for example, those that use --sysroot). This easily shows up using a Yocto SDK: $ . [snip]/sdk/environment-setup-cortexa8hf-neon-poky-linux-gnueabi $ echo $CC arm-poky-linux-gnueabi-gcc -march=armv7-a -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a8 --sysroot=[snip]/sdk/sysroots/cortexa8hf-neon-poky-linux-gnueabi $ echo $CROSS_COMPILE arm-poky-linux-gnueabi- $ echo ${CROSS_COMPILE}gcc krm-poky-linux-gnueabi-gcc Although arm-poky-linux-gnueabi-gcc is a cross-compiler, we've lost the --sysroot and other flags that enable us to find the right libraries to link against, so we can't find unistd.h and other libraries and headers. Normally with the --sysroot flag we would find unistd.h in the sdk directory in the sysroot: $ find [snip]/sdk/sysroots -path '*/usr/include/unistd.h' [snip]/sdk/sysroots/cortexa8hf-neon-poky-linux-gnueabi/usr/include/unistd.h The perf Makefile adds CC = $(CROSS_COMPILE)gcc if and only if CC is not already set, and it compiles correctly with the above toolchain. So, generalize the logic that perf uses in the common Makefile and remove the manual CC = $(CROSS_COMPILE)gcc lines from each Makefile. Note that this patch does not fix cross-compile for all the tools (some have other bugs), but it does fix it for all except usb and acpi, which still have other unrelated issues. I tested both with and without the patch on native and cross-build and there appear to be no regressions. Link: http://lkml.kernel.org/r/20180107214028.23771-1-martin@martingkelly.com Signed-off-by: Martin Kelly <martin@martingkelly.com> Acked-by: Mark Brown <broonie@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Pali Rohar <pali.rohar@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Lv Zheng <lv.zheng@intel.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Valentina Manea <valentina.manea.m@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller3-3/+7
Daniel Borkmann says: ==================== pull-request: bpf 2018-02-20 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix a memory leak in LPM trie's map_free() callback function, where the trie structure itself was not freed since initial implementation. Also a synchronize_rcu() was needed in order to wait for outstanding programs accessing the trie to complete, from Yonghong. 2) Fix sock_map_alloc()'s error path in order to correctly propagate the -EINVAL error in case of too large allocation requests. This was just recently introduced when fixing close hooks via ULP layer, fix from Eric. 3) Do not use GFP_ATOMIC in __cpu_map_entry_alloc(). Reason is that this will not work with the recent __ptr_ring_init_queue_alloc() conversion to kvmalloc_array(), where in case of fallback to vmalloc() that GFP flag is invalid, from Jason. 4) Fix two recent syzkaller warnings: i) fix bpf_prog_array_copy_to_user() when a prog query with a big number of ids was performed where we'd otherwise trigger a warning from allocator side, ii) fix a missing mlock precharge on arraymaps, from Daniel. 5) Two fixes for bpftool in order to avoid breaking JSON output when used in batch mode, from Quentin. 6) Move a pr_debug() in libbpf in order to avoid having an otherwise uninitialized variable in bpf_program__reloc_text(), from Jeremy. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-21objtool: Add module specific retpoline rulesPeter Zijlstra3-2/+12
David allowed retpolines in .init.text, except for modules, which will trip up objtool retpoline validation, fix that. Requested-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21objtool: Add retpoline validationPeter Zijlstra4-3/+89
David requested a objtool validation pass for CONFIG_RETPOLINE=y enabled builds, where it validates no unannotated indirect jumps or calls are left. Add an additional .discard.retpoline_safe section to allow annotating the few indirect sites that are required and safe. Requested-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21objtool: Use existing global variables for optionsPeter Zijlstra5-10/+10
Use the existing global variables instead of passing them around and creating duplicate global variables. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-20tools/libbpf: Avoid possibly using uninitialized variableJeremy Cline1-2/+3
Fixes a GCC maybe-uninitialized warning introduced by 48cca7e44f9f. "text" is only initialized inside the if statement so only print debug info there. Fixes: 48cca7e44f9f ("libbpf: add support for bpf_call") Signed-off-by: Jeremy Cline <jeremy@jcline.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-02-16Merge tag 'perf-core-for-mingo-4.17-20180215' of ↵Ingo Molnar33-578/+1067
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/core fixes from Arnaldo Carvalho de Melo: - perf_mmap overwrite mode fixes/overhaul, prep work to get 'perf top' using it, making it bearable to use it in large core count systems such as Knights Landing/Mill Intel systems (Kan Liang) - s/390 now uses syscall.tbl, just like x86-64 to generate the syscall table id -> string tables used by 'perf trace' (Hendrik Brueckner) - Use strtoull() instead of home grown function (Andy Shevchenko) - Synchronize kernel ABI headers, v4.16-rc1 (Ingo Molnar) - Document missing 'perf data --force' option (Sangwon Hong) - Add perf vendor JSON metrics for ARM Cortex-A53 Processor (William Cohen) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-15Revert "tools include s390: Grab a copy of arch/s390/include/uapi/asm/unistd.h"Hendrik Brueckner2-413/+0
This reverts commit f120c7b187e6c418238710b48723ce141f467543 which is no longer required with the introduction of a syscall.tbl on s390. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: linux-s390@vger.kernel.org LPU-Reference: 1518090470-2899-2-git-send-email-brueckner@linux.vnet.ibm.com Link: https://lkml.kernel.org/n/tip-q1lg0nvhha1tk39ri9aqalcb@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-02-15perf s390: Rework system call table creation by using syscall.tblHendrik Brueckner2-14/+14
Recently, s390 uses a syscall.tbl input file to generate its system call table and unistd uapi header files. Hence, update mksyscalltbl to use it as input to create the system table for perf. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: linux-s390@vger.kernel.org LPU-Reference: 1518090470-2899-4-git-send-email-brueckner@linux.vnet.ibm.com Link: https://lkml.kernel.org/n/tip-bdyhllhsq1zgxv2qx4m377y6@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-02-15perf s390: Grab a copy of arch/s390/kernel/syscall/syscall.tblHendrik Brueckner1-0/+390
Grab a copy of the s390 system call table file introduced with commit 857f46bfb07f53dc112d69bdfb137cc5ec3da7c5 "s390/syscalls: add system call table". Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: linux-s390@vger.kernel.org LPU-Reference: 1518090470-2899-3-git-send-email-brueckner@linux.vnet.ibm.com Link: https://lkml.kernel.org/n/tip-hpw7vdjp7g92ivgpddrp5ydq@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-02-15tools/headers: Synchronize kernel ABI headers, v4.16-rc1Ingo Molnar5-0/+171
Sync the following tooling headers with the latest kernel version: tools/arch/powerpc/include/uapi/asm/kvm.h tools/arch/x86/include/asm/cpufeatures.h tools/include/uapi/drm/i915_drm.h tools/include/uapi/linux/if_link.h tools/include/uapi/linux/kvm.h All the changes are new ABI additions which don't impact their use in existing tooling. Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-15perf test: Fix test trace+probe_libc_inet_pton.sh for s390xThomas Richter1-5/+18
On Intel test case trace+probe_libc_inet_pton.sh succeeds and the output is: [root@f27 perf]# ./perf trace --no-syscalls -e probe_libc:inet_pton/max-stack=3/ ping -6 -c 1 ::1 PING ::1(::1) 56 data bytes 64 bytes from ::1: icmp_seq=1 ttl=64 time=0.037 ms --- ::1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.037/0.037/0.037/0.000 ms 0.000 probe_libc:inet_pton:(7fa40ac618a0)) __GI___inet_pton (/usr/lib64/libc-2.26.so) getaddrinfo (/usr/lib64/libc-2.26.so) main (/usr/bin/ping) The kernel stack unwinder is used, it is specified implicitly as call-graph=fp (frame pointer). On s390x only dwarf is available for stack unwinding. It is also done in user space. This requires different parameter setup and result checking for s390x and Intel. This patch adds separate perf trace setup and result checking for Intel and s390x. On s390x specify this command line to get a call-graph and handle the different call graph result checking: [root@s35lp76 perf]# ./perf trace --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1 PING ::1(::1) 56 data bytes 64 bytes from ::1: icmp_seq=1 ttl=64 time=0.041 ms --- ::1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.041/0.041/0.041/0.000 ms 0.000 probe_libc:inet_pton:(3ffb9942060)) __GI___inet_pton (/usr/lib64/libc-2.26.so) gaih_inet (inlined) __GI_getaddrinfo (inlined) main (/usr/bin/ping) __libc_start_main (/usr/lib64/libc-2.26.so) _start (/usr/bin/ping) [root@s35lp76 perf]# Before: [root@s8360047 perf]# ./perf test -vv 58 58: probe libc's inet_pton & backtrace it with ping : --- start --- test child forked, pid 26349 PING ::1(::1) 56 data bytes 64 bytes from ::1: icmp_seq=1 ttl=64 time=0.079 ms --- ::1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.079/0.079/0.079/0.000 ms 0.000 probe_libc:inet_pton:(3ff925c2060)) test child finished with -1 ---- end ---- probe libc's inet_pton & backtrace it with ping: FAILED! [root@s8360047 perf]# After: [root@s35lp76 perf]# ./perf test -vv 57 57: probe libc's inet_pton & backtrace it with ping : --- start --- test child forked, pid 38708 PING ::1(::1) 56 data bytes 64 bytes from ::1: icmp_seq=1 ttl=64 time=0.038 ms --- ::1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.038/0.038/0.038/0.000 ms 0.000 probe_libc:inet_pton:(3ff87342060)) __GI___inet_pton (/usr/lib64/libc-2.26.so) gaih_inet (inlined) __GI_getaddrinfo (inlined) main (/usr/bin/ping) __libc_start_main (/usr/lib64/libc-2.26.so) _start (/usr/bin/ping) test child finished with 0 ---- end ---- probe libc's inet_pton & backtrace it with ping: Ok [root@s35lp76 perf]# On Intel the test case runs unchanged and succeeds. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180117083831.101001-1-tmricht@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-02-15perf data: Document missing --force optionSangwon Hong1-0/+4
Add the --force option to the man page. Signed-off-by: Sangwon Hong <qpakzk@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Taeung Song <treeze.taeung@gmail.com> Link: http://lkml.kernel.org/r/1517831315-31490-1-git-send-email-qpakzk@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-02-15perf tools: Substitute yet another strtoull()Andy Shevchenko1-22/+2
Instead of home grown function let's use what library provides us. Signed-off-by: Andriy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20180129130359.1490-1-andriy.shevchenko@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-02-15perf top: Check the latency of perf_top__mmap_read()Kan Liang1-0/+9
The latency of perf_top__mmap_read() should be lower than refresh time. If not, give some hints to reduce the latency. Signed-off-by: Kan Liang <kan.liang@intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1516310792-208685-18-git-send-email-kan.liang@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-02-15perf top: Switch default mode to overwrite modeKan Liang1-9/+25
perf_top__mmap_read() has a severe performance issue in the Knights Landing/Mill platform, when monitoring heavy load systems. It costs several minutes to finish, which is unacceptable. Currently, 'perf top' uses the non overwrite mode. For non overwrite mode, it tries to read everything in the ringbuffer and doesn't pause it. Once there are lots of samples delivered persistently, the processing time could be very long. Also, the latest samples could be lost when the ringbuffer is full. For overwrite mode, it takes a snapshot for the system by pausing the ringbuffer, which could significantly reduce the processing time. Also, the overwrite mode always keep the latest samples. Considering the real time requirement for 'perf top', the overwrite mode is more suitable for it. Actually, 'perf top' was overwrite mode. It is changed to non overwrite mode since commit 93fc64f14472 ("perf top: Switch to non overwrite mode"). It's better to change it back to overwrite mode by default. For the kernel which doesn't support overwrite mode, it will fall back to non overwrite mode. There would be some records lost in overwrite mode because of pausing the ringbuffer. It has little impact for the accuracy of the snapshot and can be tolerated. For overwrite mode, unconditionally wait 100 ms before each snapshot. It also reduces the overhead caused by pausing ringbuffer, especially on light load system. Signed-off-by: Kan Liang <kan.liang@intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1516310792-208685-17-git-send-email-kan.liang@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-02-15perf top: Remove lost events checkingKan Liang1-3/+5
There would be some records lost in overwrite mode because of pausing the ringbuffer. It has little impact for the accuracy of the snapshot and could be tolerated by 'perf top'. Remove the lost events checking. Signed-off-by: Kan Liang <kan.liang@intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1516310792-208685-16-git-send-email-kan.liang@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-02-15perf hists browser: Add parameter to disable lost event warningKan Liang6-20/+36
For overwrite mode, the ringbuffer will be paused. The event lost is expected. It needs a way to notify the browser not print the warning. It will be used later for perf top to disable lost event warning in overwrite mode. There is no behavior change for now. Signed-off-by: Kan Liang <kan.liang@intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1516310792-208685-15-git-send-email-kan.liang@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 11:02:57 +0000