Age | Commit message (Collapse) | Author | Files | Lines |
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Merge L1 Terminal Fault fixes from Thomas Gleixner:
"L1TF, aka L1 Terminal Fault, is yet another speculative hardware
engineering trainwreck. It's a hardware vulnerability which allows
unprivileged speculative access to data which is available in the
Level 1 Data Cache when the page table entry controlling the virtual
address, which is used for the access, has the Present bit cleared or
other reserved bits set.
If an instruction accesses a virtual address for which the relevant
page table entry (PTE) has the Present bit cleared or other reserved
bits set, then speculative execution ignores the invalid PTE and loads
the referenced data if it is present in the Level 1 Data Cache, as if
the page referenced by the address bits in the PTE was still present
and accessible.
While this is a purely speculative mechanism and the instruction will
raise a page fault when it is retired eventually, the pure act of
loading the data and making it available to other speculative
instructions opens up the opportunity for side channel attacks to
unprivileged malicious code, similar to the Meltdown attack.
While Meltdown breaks the user space to kernel space protection, L1TF
allows to attack any physical memory address in the system and the
attack works across all protection domains. It allows an attack of SGX
and also works from inside virtual machines because the speculation
bypasses the extended page table (EPT) protection mechanism.
The assoicated CVEs are: CVE-2018-3615, CVE-2018-3620, CVE-2018-3646
The mitigations provided by this pull request include:
- Host side protection by inverting the upper address bits of a non
present page table entry so the entry points to uncacheable memory.
- Hypervisor protection by flushing L1 Data Cache on VMENTER.
- SMT (HyperThreading) control knobs, which allow to 'turn off' SMT
by offlining the sibling CPU threads. The knobs are available on
the kernel command line and at runtime via sysfs
- Control knobs for the hypervisor mitigation, related to L1D flush
and SMT control. The knobs are available on the kernel command line
and at runtime via sysfs
- Extensive documentation about L1TF including various degrees of
mitigations.
Thanks to all people who have contributed to this in various ways -
patches, review, testing, backporting - and the fruitful, sometimes
heated, but at the end constructive discussions.
There is work in progress to provide other forms of mitigations, which
might be less horrible performance wise for a particular kind of
workloads, but this is not yet ready for consumption due to their
complexity and limitations"
* 'l1tf-final' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits)
x86/microcode: Allow late microcode loading with SMT disabled
tools headers: Synchronise x86 cpufeatures.h for L1TF additions
x86/mm/kmmio: Make the tracer robust against L1TF
x86/mm/pat: Make set_memory_np() L1TF safe
x86/speculation/l1tf: Make pmd/pud_mknotpresent() invert
x86/speculation/l1tf: Invert all not present mappings
cpu/hotplug: Fix SMT supported evaluation
KVM: VMX: Tell the nested hypervisor to skip L1D flush on vmentry
x86/speculation: Use ARCH_CAPABILITIES to skip L1D flush on vmentry
x86/speculation: Simplify sysfs report of VMX L1TF vulnerability
Documentation/l1tf: Remove Yonah processors from not vulnerable list
x86/KVM/VMX: Don't set l1tf_flush_l1d from vmx_handle_external_intr()
x86/irq: Let interrupt handlers set kvm_cpu_l1tf_flush_l1d
x86: Don't include linux/irq.h from asm/hardirq.h
x86/KVM/VMX: Introduce per-host-cpu analogue of l1tf_flush_l1d
x86/irq: Demote irq_cpustat_t::__softirq_pending to u16
x86/KVM/VMX: Move the l1tf_flush_l1d test to vmx_l1d_flush()
x86/KVM/VMX: Replace 'vmx_l1d_flush_always' with 'vmx_l1d_flush_cond'
x86/KVM/VMX: Don't set l1tf_flush_l1d to true from vmx_l1d_flush()
cpu/hotplug: detect SMT disabled by BIOS
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
- parisc now uses the generic dma_noncoherent_ops implementation
(Christoph Hellwig)
- further memory barrier and spinlock improvements (John David Anglin)
- prepare removal of current_text_addr() functions (Nick Desaulniers)
- improve kernel stack unwinding on parisc (me)
- drop ENOTSUP which was defined on parisc only (me)
* 'parisc-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix and improve kernel stack unwinding
parisc: Remove unnecessary barriers from spinlock.h
parisc: Remove ordered stores from syscall.S
parisc: prefer _THIS_IP_ and _RET_IP_ statement expressions
parisc: Add HAVE_REGS_AND_STACK_ACCESS_API feature
parisc: Drop architecture-specific ENOTSUP define
parisc: use generic dma_noncoherent_ops
parisc: always use flush_kernel_dcache_range for DMA cache maintainance
parisc: merge pcx_dma_ops and pcxl_dma_ops
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
"Since Martin is on vacation you get the s390 pull request from me:
- Host large page support for KVM guests. As the patches have large
impact on arch/s390/mm/ this series goes out via both the KVM and
the s390 tree.
- Add an option for no compression to the "Kernel compression mode"
menu, this will come in handy with the rework of the early boot
code.
- A large rework of the early boot code that will make life easier
for KASAN and KASLR. With the rework the bootable uncompressed
image is not generated anymore, only the bzImage is available. For
debuggung purposes the new "no compression" option is used.
- Re-enable the gcc plugins as the issue with the latent entropy
plugin is solved with the early boot code rework.
- More spectre relates changes:
+ Detect the etoken facility and remove expolines automatically.
+ Add expolines to a few more indirect branches.
- A rewrite of the common I/O layer trace points to make them
consumable by 'perf stat'.
- Add support for format-3 PCI function measurement blocks.
- Changes for the zcrypt driver:
+ Add attributes to indicate the load of cards and queues.
+ Restructure some code for the upcoming AP device support in KVM.
- Build flags improvements in various Makefiles.
- A few fixes for the kdump support.
- A couple of patches for gcc 8 compile warning cleanup.
- Cleanup s390 specific proc handlers.
- Add s390 support to the restartable sequence self tests.
- Some PTR_RET vs PTR_ERR_OR_ZERO cleanup.
- Lots of bug fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (107 commits)
s390/dasd: fix hanging offline processing due to canceled worker
s390/dasd: fix panic for failed online processing
s390/mm: fix addressing exception after suspend/resume
rseq/selftests: add s390 support
s390: fix br_r1_trampoline for machines without exrl
s390/lib: use expoline for all bcr instructions
s390/numa: move initial setup of node_to_cpumask_map
s390/kdump: Fix elfcorehdr size calculation
s390/cpum_sf: save TOD clock base in SDBs for time conversion
KVM: s390: Add huge page enablement control
s390/mm: Add huge page gmap linking support
s390/mm: hugetlb pages within a gmap can not be freed
KVM: s390: Add skey emulation fault handling
s390/mm: Add huge pmd storage key handling
s390/mm: Clear skeys for newly mapped huge guest pmds
s390/mm: Clear huge page storage keys on enable_skey
s390/mm: Add huge page dirty sync support
s390/mm: Add gmap pmd invalidation and clearing
s390/mm: Add gmap pmd notification bit setting
s390/mm: Add gmap pmd linking
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm updates from Thomas Gleixner:
"The lowlevel and ASM code updates for x86:
- Make stack trace unwinding more reliable
- ASM instruction updates for better code generation
- Various cleanups"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry/64: Add two more instruction suffixes
x86/asm/64: Use 32-bit XOR to zero registers
x86/build/vdso: Simplify 'cmd_vdso2c'
x86/build/vdso: Remove unused vdso-syms.lds
x86/stacktrace: Enable HAVE_RELIABLE_STACKTRACE for the ORC unwinder
x86/unwind/orc: Detect the end of the stack
x86/stacktrace: Do not fail for ORC with regs on stack
x86/stacktrace: Clarify the reliable success paths
x86/stacktrace: Remove STACKTRACE_DUMP_ONCE
x86/stacktrace: Do not unwind after user regs
x86/asm: Use CC_SET/CC_OUT in percpu_cmpxchg8b_double() to micro-optimize code generation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"The timers departement more or less proudly presents:
- More Y2038 timekeeping work mostly in the core code. The work is
slowly, but steadily targeting the actuall syscalls.
- Enhanced timekeeping suspend/resume support by utilizing
clocksources which do not stop during suspend, but are otherwise
not the main timekeeping clocksources.
- Make NTP adjustmets more accurate and immediate when the frequency
is set directly and not incrementally.
- Sanitize the overrung handing of posix timers
- A new timer driver for Mediatek SoCs
- The usual pile of fixes and updates all over the place"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
clockevents: Warn if cpu_all_mask is used as cpumask
tick/broadcast-hrtimer: Use cpu_possible_mask for ce_broadcast_hrtimer
clocksource/drivers/arm_arch_timer: Fix bogus cpu_all_mask usage
clocksource: ti-32k: Remove CLOCK_SOURCE_SUSPEND_NONSTOP flag
timers: Clear timer_base::must_forward_clk with timer_base::lock held
clocksource/drivers/sprd: Register one always-on timer to compensate suspend time
clocksource/drivers/timer-mediatek: Add support for system timer
clocksource/drivers/timer-mediatek: Convert the driver to timer-of
clocksource/drivers/timer-mediatek: Use specific prefix for GPT
clocksource/drivers/timer-mediatek: Rename mtk_timer to timer-mediatek
clocksource/drivers/timer-mediatek: Add system timer bindings
clocksource/drivers: Set clockevent device cpumask to cpu_possible_mask
time: Introduce one suspend clocksource to compensate the suspend time
time: Fix extra sleeptime injection when suspend fails
timekeeping/ntp: Constify some function arguments
ntp: Use kstrtos64 for s64 variable
ntp: Remove redundant arguments
timer: Fix coding style
ktime: Provide typesafe ktime_to_ns()
hrtimer: Improve kernel message printing
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf update from Thomas Gleixner:
"The perf crowd presents:
Kernel updates:
- Removal of jprobes
- Cleanup and consolidatation the handling of kprobes
- Cleanup and consolidation of hardware breakpoints
- The usual pile of fixes and updates to PMUs and event descriptors
Tooling updates:
- Updates and improvements all over the place. Nothing outstanding,
just the (good) boring incremental grump work"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (103 commits)
perf trace: Do not require --no-syscalls to suppress strace like output
perf bpf: Include uapi/linux/bpf.h from the 'perf trace' script's bpf.h
perf tools: Allow overriding MAX_NR_CPUS at compile time
perf bpf: Show better message when failing to load an object
perf list: Unify metric group description format with PMU event description
perf vendor events arm64: Update ThunderX2 implementation defined pmu core events
perf cs-etm: Generate branch sample for CS_ETM_TRACE_ON packet
perf cs-etm: Generate branch sample when receiving a CS_ETM_TRACE_ON packet
perf cs-etm: Support dummy address value for CS_ETM_TRACE_ON packet
perf cs-etm: Fix start tracing packet handling
perf build: Fix installation directory for eBPF
perf c2c report: Fix crash for empty browser
perf tests: Fix indexing when invoking subtests
perf trace: Beautify the AF_INET & AF_INET6 'socket' syscall 'protocol' args
perf trace beauty: Add beautifiers for 'socket''s 'protocol' arg
perf trace beauty: Do not print NULL strarray entries
perf beauty: Add a generator for IPPROTO_ socket's protocol constants
tools include uapi: Grab a copy of linux/in.h
perf tests: Fix complex event name parsing
perf evlist: Fix error out while applying initial delay and LBR
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking/atomics update from Thomas Gleixner:
"The locking, atomics and memory model brains delivered:
- A larger update to the atomics code which reworks the ordering
barriers, consolidates the atomic primitives, provides the new
atomic64_fetch_add_unless() primitive and cleans up the include
hell.
- Simplify cmpxchg() instrumentation and add instrumentation for
xchg() and cmpxchg_double().
- Updates to the memory model and documentation"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (48 commits)
locking/atomics: Rework ordering barriers
locking/atomics: Instrument cmpxchg_double*()
locking/atomics: Instrument xchg()
locking/atomics: Simplify cmpxchg() instrumentation
locking/atomics/x86: Reduce arch_cmpxchg64*() instrumentation
tools/memory-model: Rename litmus tests to comply to norm7
tools/memory-model/Documentation: Fix typo, smb->smp
sched/Documentation: Update wake_up() & co. memory-barrier guarantees
locking/spinlock, sched/core: Clarify requirements for smp_mb__after_spinlock()
sched/core: Use smp_mb() in wake_woken_function()
tools/memory-model: Add informal LKMM documentation to MAINTAINERS
locking/atomics/Documentation: Describe atomic_set() as a write operation
tools/memory-model: Make scripts executable
tools/memory-model: Remove ACCESS_ONCE() from model
tools/memory-model: Remove ACCESS_ONCE() from recipes
locking/memory-barriers.txt/kokr: Update Korean translation to fix broken DMA vs. MMIO ordering example
MAINTAINERS: Add Daniel Lustig as an LKMM reviewer
tools/memory-model: Fix ISA2+pooncelock+pooncelock+pombonce name
tools/memory-model: Add litmus test for full multicopy atomicity
locking/refcount: Always allow checked forms
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Thomas Gleixner:
"A large update to RCU:
Preparatory work for consolidating the RCU flavors:
- Introduce grace-period sequence numbers to the RCU-bh, RCU-preempt,
and RCU-sched flavors, replacing the old ->gpnum and ->completed
pair of fields.
This change allows lockless code to obtain the complete
grace-period state with a single READ_ONCE(), which is needed to
maintain tolerable lock contention during the upcoming
consolidation of the three RCU flavors.
Note that grace-period sequence numbers are already used by
rcu_barrier(), expedited RCU grace periods, and SRCU, and are thus
already heavily used and well-tested. Joel Fernandes contributed a
number of excellent fixes and improvements.
- Clean up some grace-period-reporting loose ends, including
improving the handling of quiescent states from offline CPUs and
fixing some false-positive WARN_ON_ONCE() invocations.
(Strictly speaking, the WARN_ON_ONCE() invocations were quite
correct, but their invariants were (harmlessly) violated by the
earlier sloppy handling of quiescent states from offline CPUs.)
In addition, improve grace-period forward-progress guarantees so as
to allow removal of fail-safe checks that required otherwise
needless lock acquisitions. Finally, add more diagnostics to help
debug the upcoming consolidation of the RCU-bh, RCU-preempt, and
RCU-sched flavors.
The rest:
- SRCU updates
- Updates to rcutorture and associated scripting.
- The usual pile of miscellaneous fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (118 commits)
rcutorture: Fix rcu_barrier successes counter
rcutorture: Add support to detect if boost kthread prio is too low
rcutorture: Use monotonic timestamp for stall detection
rcutorture: Make boost test more robust
rcutorture: Disable RT throttling for boost tests
rcutorture: Emphasize testing of single reader protection type
rcutorture: Handle extended read-side critical sections
rcutorture: Make rcu_torture_timer() use rcu_torture_one_read()
rcutorture: Use per-CPU random state for rcu_torture_timer()
rcutorture: Use atomic increment for n_rcu_torture_timers
rcutorture: Extract common code from rcu_torture_reader()
rcuperf: Remove unused torturing_tasks() function
rcu: Remove rcutorture test version and sequence number
rcutorture: Change units of onoff_interval to jiffies
rcu: Assign higher prio to RCU threads if rcutorture is built-in
rculist: Improve documentation for list_for_each_entry_from_rcu()
srcu: Add grace-period number to rcutorture statistics printout
rcu: Print stall-warning NMI dyntick state in hexadecimal
MAINTAINERS: Update RCU, SRCU, and TORTURE-TEST entries
rcu: Make rcu_seq_diff() more exact
...
|
|
parisc is the only Linux architecture which has defined a value for ENOTSUP.
All other architectures #define ENOTSUP as EOPNOTSUPP in their libc headers.
Having an own value for ENOTSUP which is different than EOPNOTSUPP often gives
problems with userspace programs which expect both to be the same. One such
example is a build error in the libuv package, as can be seen in
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=900237.
Since we dropped HP-UX support, there is no real benefit in keeping an own
value for ENOTSUP. This patch drops the parisc value for ENOTSUP from the
kernel sources. glibc needs no patch, it reuses the exported headers.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
|
|
Implement support for s390 in the rseq selftests, in order to sanity
check the recently enabled rseq syscall. The Implementation covers both
64-bit and 31-bit mode.
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
I ran into the same issue as a009f1f396d0 ("selftests/bpf:
test_sockmap, timing improvements") where I had a broken
pipe error on the socket due to remote end timing out on
select and then shutting down it's sockets while the other
side was still sending. We may need to do a bigger rework
in general on the test_sockmap.c, but for now increase it
to a more suitable timeout.
Fixes: a18fda1a62c3 ("bpf: reduce runtime of test_sockmap tests")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch changes the tools/lib/bpf/btf.[ch] to LGPL which
is inline with libbpf also.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"A set of fixes for perf:
Kernel side:
- Fix the hardcoded index of extra PCI devices on Broadwell which
caused a resource conflict and triggered warnings on CPU hotplug.
Tooling:
- Update the tools copy of several files, including perf_event.h,
powerpc's asm/unistd.h (new io_pgetevents syscall), bpf.h and x86's
memcpy_64.s (used in 'perf bench mem'), silencing the respective
warnings during the perf tools build.
- Fix the build on the alpine:edge distro"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Fix hardcoded index of Broadwell extra PCI devices
perf tools: Fix the build on the alpine:edge distro
tools arch: Update arch/x86/lib/memcpy_64.S copy used in 'perf bench mem memcpy'
tools headers uapi: Refresh linux/bpf.h copy
tools headers powerpc: Update asm/unistd.h copy to pick new
tools headers uapi: Update tools's copy of linux/perf_event.h
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2018-08-05
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix bpftool percpu_array dump by using correct roundup to next
multiple of 8 for the value size, from Yonghong.
2) Fix in AF_XDP's __xsk_rcv_zc() to not returning frames back to
allocator since driver will recycle frame anyway in case of an
error, from Jakub.
3) Fix up BPF test_lwt_seg6local test cases to final iproute2
syntax, from Mathieu.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The shell file for test_lwt_seg6local contains an early iproute2 syntax
for installing a seg6local End.BPF route. iproute2 support for this
feature has recently been upstreamed, but with an additional keyword
required. This patch updates test_lwt_seg6local.sh to the definitive
iproute2 syntax
Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
use actual protocol family passed by user rather than hardcoded
AF_INTE6 to cerate sockets.
current code is not working for IPv4.
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Signed-off-by: Vaneet Narang <v.narang@samsung.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
So far the --syscalls option was the default, requiring explicit
--no-syscalls when wanting to process just some other event, invert that
and assume it only when no other event was specified, allowing its
explicit enablement when wanting to see all syscalls together with some
other event:
E.g:
The existing default is maintained for a single workload:
# perf trace sleep 1
<SNIP>
0.264 ( 0.003 ms): sleep/12762 mmap(len: 113045344, prot: READ, flags: PRIVATE, fd: 3) = 0x7f62cbf04000
0.271 ( 0.001 ms): sleep/12762 close(fd: 3) = 0
0.295 (1000.130 ms): sleep/12762 nanosleep(rqtp: 0x7ffd15194fd0) = 0
1000.469 ( 0.006 ms): sleep/12762 close(fd: 1) = 0
1000.480 ( 0.004 ms): sleep/12762 close(fd: 2) = 0
1000.502 ( ): sleep/12762 exit_group()
#
For a pid:
# pidof ssh
7826 3961 3226 2628 2493
# perf trace -p 3961
? ( ): ... [continued]: select()) = 1
0.023 ( 0.005 ms): clock_gettime(which_clock: BOOTTIME, tp: 0x7ffcc8fce870 ) = 0
0.036 ( 0.009 ms): read(fd: 5</dev/pts/7>, buf: 0x7ffcc8fca7b0, count: 16384 ) = 3
0.060 ( 0.004 ms): getpid( ) = 3961 (ssh)
0.079 ( 0.004 ms): clock_gettime(which_clock: BOOTTIME, tp: 0x7ffcc8fce8e0 ) = 0
0.088 ( 0.003 ms): clock_gettime(which_clock: BOOTTIME, tp: 0x7ffcc8fce7c0 ) = 0
<SNIP>
For system wide, threads, cgroups, user, etc when no event is specified,
the existing behaviour is maintained, i.e. --syscalls is selected.
When some event is specified, then --no-syscalls doesn't need to be
specified:
# perf trace -e tcp:tcp_probe ssh localhost
0.000 tcp:tcp_probe:src=[::1]:22 dest=[::1]:39074 mark=0 length=53 snd_nxt=0xb67ce8f7 snd_una=0xb67ce8f7 snd_cwnd=10 ssthresh=2147483647 snd_wnd=43776 srtt=18 rcv_wnd=43690
0.010 tcp:tcp_probe:src=[::1]:39074 dest=[::1]:22 mark=0 length=32 snd_nxt=0xa8f9ef38 snd_una=0xa8f9ef23 snd_cwnd=10 ssthresh=2147483647 snd_wnd=43690 srtt=31 rcv_wnd=43776
4.525 tcp:tcp_probe:src=[::1]:22 dest=[::1]:39074 mark=0 length=1240 snd_nxt=0xb67ce90c snd_una=0xb67ce90c snd_cwnd=10 ssthresh=2147483647 snd_wnd=43776 srtt=18 rcv_wnd=43776
7.242 tcp:tcp_probe:src=[::1]:22 dest=[::1]:39074 mark=0 length=80 snd_nxt=0xb67ced44 snd_una=0xb67ce90c snd_cwnd=10 ssthresh=2147483647 snd_wnd=43776 srtt=18 rcv_wnd=174720
The authenticity of host 'localhost (::1)' can't be established.
ECDSA key fingerprint is SHA256:TKZS58923458203490asekfjaklskljmkjfgPMBfHzY.
ECDSA key fingerprint is MD5:d8:29:54:40:71:fa:b8:44:89:52:64:8a:35:42:d0:e8.
Are you sure you want to continue connecting (yes/no)?
^C
#
To get the previous behaviour just use --syscalls and get all syscalls formatted
strace like + the specified extra events:
# trace -e sched:*switch --syscalls sleep 1
<SNIP>
0.160 ( 0.003 ms): sleep/12877 mprotect(start: 0x7fdfe2361000, len: 4096, prot: READ) = 0
0.164 ( 0.009 ms): sleep/12877 munmap(addr: 0x7fdfe2345000, len: 113155) = 0
0.211 ( 0.001 ms): sleep/12877 brk() = 0x55d3ce68e000
0.212 ( 0.002 ms): sleep/12877 brk(brk: 0x55d3ce6af000) = 0x55d3ce6af000
0.215 ( 0.001 ms): sleep/12877 brk() = 0x55d3ce6af000
0.219 ( 0.004 ms): sleep/12877 open(filename: 0xe1f07c00, flags: CLOEXEC) = 3
0.225 ( 0.001 ms): sleep/12877 fstat(fd: 3, statbuf: 0x7fdfe2138aa0) = 0
0.227 ( 0.003 ms): sleep/12877 mmap(len: 113045344, prot: READ, flags: PRIVATE, fd: 3) = 0x7fdfdb1b8000
0.234 ( 0.001 ms): sleep/12877 close(fd: 3) = 0
0.257 ( ): sleep/12877 nanosleep(rqtp: 0x7fffb36b6020) ...
0.260 ( ): sched:sched_switch:prev_comm=sleep prev_pid=12877 prev_prio=120 prev_state=D ==> next_comm=swapper/3 next_pid=0 next_prio=120
0.257 (1000.134 ms): sleep/12877 ... [continued]: nanosleep()) = 0
1000.428 ( 0.006 ms): sleep/12877 close(fd: 1) = 0
1000.440 ( 0.004 ms): sleep/12877 close(fd: 2) = 0
1000.461 ( ): sleep/12877 exit_group()
#
When specifiying just some syscalls, the behaviour doesn't change, i.e.:
# trace -e nanosleep -e sched:*switch sleep 1
0.000 ( ): sleep/14974 nanosleep(rqtp: 0x7ffc344ba9c0 ) ...
0.007 ( ): sched:sched_switch:prev_comm=sleep prev_pid=14974 prev_prio=120 prev_state=D ==> next_comm=swapper/2 next_pid=0 next_prio=120
0.000 (1000.139 ms): sleep/14974 ... [continued]: nanosleep()) = 0
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-om2fulll97ytnxv40ler8jkf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix the scope of a recent intel_pstate driver optimization used
incorrectly on some systems due to processor identification ambiguity
and fix a few issues in the turbostat utility, including three recent
regressions.
Specifics:
- Use ACPI FADT preferred PM Profile to distinguish Skylake desktop
processors from some server ones with the same model number in
order to limit the scope of the recent IO-wait boost optimization
to servers, as intended (Srinivas Pandruvada).
- Fix several issues in the turbostat utility:
* Fix the -S option on 1-CPU systems (Len Brown).
* Fix computations using incorrect processor core counts (Artem
Bityutskiy).
* Fix the x2apic debug message (Len Brown).
* Fix logical node enumeration to allow for non-sequential
physical nodes (Prarit Bhargava).
* Fix reported family on modern AMD processors (Calvin Walton).
* Clarify the RAPL column information in the man page (Len Brown)"
* tag 'pm-urgent-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Limit the scope of HWP dynamic boost platforms
tools/power turbostat: version 18.07.27
tools/power turbostat: Read extended processor family from CPUID
tools/power turbostat: Fix logical node enumeration to allow for non-sequential physical nodes
tools/power turbostat: fix x2apic debug message output file
tools/power turbostat: fix bogus summary values
tools/power turbostat: fix -S on UP systems
tools/power turbostat: Update turbostat(8) RAPL throttling column description
|
|
The next example scripts need the definition for the BPF functions, i.e.
things like BPF_FUNC_probe_read, and in time will require lots of other
definitions found in uapi/linux/bpf.h, so include it from the bpf.h file
included from the eBPF scripts build with clang via '-e bpf_script.c'
like in this example:
$ tail -8 tools/perf/examples/bpf/5sec.c
#include <bpf.h>
int probe(hrtimer_nanosleep, rqtp->tv_sec)(void *ctx, int err, long sec)
{
return sec == 5;
}
license(GPL);
$
That 'bpf.h' include in the 5sec.c eBPF example will come from a set of
header files crafted for building eBPF objects, that in a end-user
system will come from:
/usr/lib/perf/include/bpf/bpf.h
And will include <uapi/linux/bpf.h> either from the place where the
kernel was built, or from a kernel-devel rpm package like:
-working-directory /lib/modules/4.17.9-100.fc27.x86_64/build
That is set up by tools/perf/util/llvm-utils.c, and can be overriden
by setting the 'kbuild-dir' variable in the "llvm" ~/.perfconfig file,
like:
# cat ~/.perfconfig
[llvm]
kbuild-dir = /home/foo/git/build/linux
This usually doesn't need any change, just documenting here my findings
while working with this code.
In the future we may want to instead just use what is in
/usr/include/linux/bpf.h, that comes from the UAPI provided from the
kernel sources, for now, to avoid getting the kernel's non-UAPI
"linux/bpf.h" file, that will cause clang to fail and is not what we
want anyway (no BPF function definitions, etc), do it explicitely by
asking for "uapi/linux/bpf.h".
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-zd8zeyhr2sappevojdem9xxt@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
After update of kernel, the perf tool doesn't run anymore on my 32MB RAM
powerpc board, but still runs on a 128MB RAM board:
~# strace perf
execve("/usr/sbin/perf", ["perf"], [/* 12 vars */]) = -1 ENOMEM (Cannot allocate memory)
--- SIGSEGV {si_signo=SIGSEGV, si_code=SI_KERNEL, si_addr=0} ---
+++ killed by SIGSEGV +++
Segmentation fault
objdump -x shows that .bss section has a huge size of 24Mbytes:
27 .bss 016baca8 101cebb8 101cebb8 001cd988 2**3
With especially the following objects having quite big size:
10205f80 l O .bss 00140000 runtime_cycles_stats
10345f80 l O .bss 00140000 runtime_stalled_cycles_front_stats
10485f80 l O .bss 00140000 runtime_stalled_cycles_back_stats
105c5f80 l O .bss 00140000 runtime_branches_stats
10705f80 l O .bss 00140000 runtime_cacherefs_stats
10845f80 l O .bss 00140000 runtime_l1_dcache_stats
10985f80 l O .bss 00140000 runtime_l1_icache_stats
10ac5f80 l O .bss 00140000 runtime_ll_cache_stats
10c05f80 l O .bss 00140000 runtime_itlb_cache_stats
10d45f80 l O .bss 00140000 runtime_dtlb_cache_stats
10e85f80 l O .bss 00140000 runtime_cycles_in_tx_stats
10fc5f80 l O .bss 00140000 runtime_transaction_stats
11105f80 l O .bss 00140000 runtime_elision_stats
11245f80 l O .bss 00140000 runtime_topdown_total_slots
11385f80 l O .bss 00140000 runtime_topdown_slots_retired
114c5f80 l O .bss 00140000 runtime_topdown_slots_issued
11605f80 l O .bss 00140000 runtime_topdown_fetch_bubbles
11745f80 l O .bss 00140000 runtime_topdown_recovery_bubbles
This is due to commit 4d255766d28b1 ("perf: Bump max number of cpus
to 1024"), because many tables are sized with MAX_NR_CPUS
This patch gives the opportunity to redefine MAX_NR_CPUS via
$ make EXTRA_CFLAGS=-DMAX_NR_CPUS=1
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20170922112043.8349468C57@po15668-vm-win7.idsi0.si.c-s.fr
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Merge turbostat utility fixes for final 4.18:
- Fix the -S option on 1-CPU systems.
- Fix computations using incorrect processor core counts.
- Fix the x2apic debug message.
- Fix logical node enumeration to allow for non-sequential physical nodes.
- Fix reported family on modern AMD processors.
- Clarify the RAPL column information in the man page.
* pm-tools:
tools/power turbostat: version 18.07.27
tools/power turbostat: Read extended processor family from CPUID
tools/power turbostat: Fix logical node enumeration to allow for non-sequential physical nodes
tools/power turbostat: fix x2apic debug message output file
tools/power turbostat: fix bogus summary values
tools/power turbostat: fix -S on UP systems
tools/power turbostat: Update turbostat(8) RAPL throttling column description
|
|
Pull virtio fixes from Michael Tsirkin:
"Some bugfixes that seem important and safe enough to merge at the last
minute"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_balloon: fix another race between migration and ballooning
tools/virtio: add kmalloc_array stub
tools/virtio: add dma barrier stubs
|
|
Before:
libbpf: license of tools/perf/examples/bpf/etcsnoop.c is GPL
libbpf: section(6) version, size 4, link 0, flags 3, type=1
libbpf: kernel version of tools/perf/examples/bpf/etcsnoop.c is 41200
libbpf: section(7) .symtab, size 120, link 1, flags 0, type=2
bpf: config program 'syscalls:sys_enter_openat'
libbpf: load bpf program failed: Operation not permitted
libbpf: failed to load program 'syscalls:sys_enter_openat'
libbpf: failed to load object 'tools/perf/examples/bpf/etcsnoop.c'
bpf: load objects failed
After: (just the last line changes)
bpf: load objects failed: err=-4009: (Incorrect kernel version)
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-wi44iid0yjfht3lcvplc75fm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
PMU event descriptions use 7 spaces + '[' or 8 spaces as indentation.
Metric groups used a tab + '['. This patch unifies it to the way PMU
event descriptions are indented.
BEFORE:
$ perf list
[...]
Metric Groups:
DSB:
DSB_Coverage
[Fraction of Uops delivered by the DSB (aka Decoded Icache; or Uop Cache)]
[...]
AFTER:
$ perf list
[...]
Metric Groups:
DSB:
DSB_Coverage
[Fraction of Uops delivered by the DSB (aka Decoded Icache; or Uop Cache)]
[...]
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
LPU-Reference: 771439042.22924766.1532986504631.JavaMail.zimbra@redhat.com
Link: https://lkml.kernel.org/n/tip-mlo850517m6u1rbjndvd1bwr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
events
Signed-off-by: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ganapatrao Kulkarni <gklkml16@gmail.com>
Cc: Jan Glauber <jan.glauber@cavium.com>
Cc: Jayachandran C <jnair@caviumnetworks.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@cavium.com>
Cc: Vadim Lomovtsev <vadim.lomovtsev@cavium.com>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/20180731100251.23575-1-ganapatrao.kulkarni@cavium.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
CS_ETM_TRACE_ON packet itself can give the info that there have a
discontinuity in the trace, this patch is to add branch sample for
CS_ETM_TRACE_ON packet if it is inserted in the middle of CS_ETM_RANGE
packets; as result we can have hint for the trace discontinuity.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1531295145-596-7-git-send-email-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
If one CS_ETM_TRACE_ON packet is inserted, we miss to generate branch
sample for the previous CS_ETM_RANGE packet.
This patch is to generate branch sample when receiving a CS_ETM_TRACE_ON
packet, so this can save complete info for the previous CS_ETM_RANGE
packet just before CS_ETM_TRACE_ON packet.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1531295145-596-6-git-send-email-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
For CS_ETM_TRACE_ON packet, its fields 'packet->start_addr' and
'packet->end_addr' equal to 0xdeadbeefdeadbeefUL which are emitted in
the decoder layer as dummy value, but the dummy value is pointless for
branch sample when we use 'perf script' command to check program flow.
This patch is a preparation to support CS_ETM_TRACE_ON packet for branch
sample, it converts the dummy address value to zero for more readable;
this is accomplished by cs_etm__last_executed_instr() and
cs_etm__first_executed_instr(). The later one is a new function
introduced by this patch.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1531295145-596-5-git-send-email-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Usually the start tracing packet is a CS_ETM_TRACE_ON packet, this
packet is passed to cs_etm__flush(); cs_etm__flush() will check the
condition 'prev_packet->sample_type == CS_ETM_RANGE' but 'prev_packet'
is allocated by zalloc() so 'prev_packet->sample_type' is zero in
initialization and this condition is false. So cs_etm__flush() will
directly bail out without handling the start tracing packet.
This patch is to introduce a new sample type CS_ETM_EMPTY, which is used
to indicate the packet is an empty packet. cs_etm__flush() will swap
packets when it finds the previous packet is empty, so this can record
the start tracing packet into 'etmq->prev_packet'.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1531295145-596-4-git-send-email-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The perf tool build and install is controlled via a Makefile. The
'install' rule creates directories and copies files. Among them are
header files installed in /usr/lib/include/perf/bpf/.
However all listed examples are installing its header files in
/usr/lib/<tool-name>/...[/include]/header.h
and not in
/usr/lib/include/<tool-name>/.../header.h.
Background information:
Building the Fedora 28 glibc RPM on s390x and s390 fails on s390 (gcc
-m31) as gcc is not able to find header-files like stdbool.h.
In the glibc.spec file, you can see that glibc is configured with
"--with-headers". In this case, first -nostdinc is added to the CFLAGS
and then further include paths are added via -isystem. One of those
paths should contain header files like stdbool.h.
In order to get this path, gcc is invoked with:
- on Fedora 28 (with 4.18 kernel):
$ gcc -print-file-name=include
/usr/lib/gcc/s390x-redhat-linux/8/include
$ gcc -m31 -print-file-name=include
/usr/lib/gcc/s390x-redhat-linux/8/../../../../lib/include
=> If perf is installed, this is: /usr/lib/include
On my machine this directory is only containing the directory "perf".
If perf is not installed gcc returns: /usr/lib/gcc/s390x-redhat-linux/8/include
- on Ubuntu 18.04 (with 4.15 kernel):
$ gcc -print-file-name=include
/usr/lib/gcc/s390x-linux-gnu/7/include
$ gcc -m31 -print-file-name=include
/usr/lib/gcc/s390x-linux-gnu/7/include
=> gcc returns the correct path even if perf is installed.
In each case, the introduction of the subdirectory /usr/lib/include
leads to the regression that one can not build the glibc RPM for s390
anymore as gcc can not find headers like stdbool.h.
To remedy this install bpf.h to /usr/lib/perf/include/bpf/bpf.h
Output before using the command 'perf test -Fv 40':
echo '...[bpf-program-source]...' | /usr/bin/clang ... \
-I/root/lib/include/perf/bpf ...
^^^^^^^^^^^^
...
[root@p23lp27 perf]# perf test -F 40
40: BPF filter :
40.1: Basic BPF filtering : Ok
40.2: BPF pinning : Ok
40.3: BPF prologue generation : Ok
40.4: BPF relocation checker : Ok
[root@p23lp27 perf]#
Output after using command 'perf test -Fv 40':
echo '...[bpf-program-source]...' | /usr/bin/clang ... \
-I/root/lib/perf/include/bpf ...
^^^^^^^^^^^^
...
[root@p23lp27 perf]# perf test -F 40
40: BPF filter :
40.1: Basic BPF filtering : Ok
40.2: BPF pinning : Ok
40.3: BPF prologue generation : Ok
40.4: BPF relocation checker : Ok
[root@p23lp27 perf]#
Committer testing:
While the above 'perf test -F 40' (or 'perf test bpf') will allow us
to see that the correct path is now added via -I, to actually test this
we better try to use a bpf script that includes files in the changed
directory.
We have the files that now reside in /root/lib/perf/examples/bpf/ to do
just that:
# tail -8 /root/lib/perf/examples/bpf/5sec.c
#include <bpf.h>
int probe(hrtimer_nanosleep, rqtp->tv_sec)(void *ctx, int err, long sec)
{
return sec == 5;
}
license(GPL);
# perf trace -e *sleep -e /root/lib/perf/examples/bpf/5sec.c sleep 4
0.333 (4000.086 ms): sleep/9248 nanosleep(rqtp: 0x7ffc155f3300) = 0
# perf trace -e *sleep -e /root/lib/perf/examples/bpf/5sec.c sleep 5
0.287 ( ): sleep/9659 nanosleep(rqtp: 0x7ffeafe38200) ...
0.290 ( ): perf_bpf_probe:hrtimer_nanosleep:(ffffffff9911efe0) tv_sec=5
0.287 (5000.059 ms): sleep/9659 ... [continued]: nanosleep()) = 0
# perf trace -e *sleep -e /root/lib/perf/examples/bpf/5sec.c sleep 6
0.247 (5999.951 ms): sleep/10068 nanosleep(rqtp: 0x7fff2086d900) = 0
# perf trace -e *sleep -e /root/lib/perf/examples/bpf/5sec.c sleep 5.987
0.293 ( ): sleep/10489 nanosleep(rqtp: 0x7ffdd4fc10e0) ...
0.296 ( ): perf_bpf_probe:hrtimer_nanosleep:(ffffffff9911efe0) tv_sec=5
0.293 (5986.912 ms): sleep/10489 ... [continued]: nanosleep()) = 0
#
Suggested-by: Stefan Liebler <stli@linux.ibm.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Fixes: 1b16fffa389d ("perf llvm-utils: Add bpf include path to clang command line")
Link: http://lkml.kernel.org/r/20180731073254.91090-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
'perf c2c' scans read/write accesses and tries to find false sharing
cases, so when the events it wants were not asked for or ended up not
taking place, we get no histograms.
So do not try to display entry details if there's not any. Currently
this ends up in crash:
$ perf c2c report # then press 'd'
perf: Segmentation fault
$
Committer testing:
Before:
Record a perf.data file without events of interest to 'perf c2c report',
then call it and press 'd':
# perf record sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.001 MB perf.data (6 samples) ]
# perf c2c report
perf: Segmentation fault
-------- backtrace --------
perf[0x5b1d2a]
/lib64/libc.so.6(+0x346df)[0x7fcb566e36df]
perf[0x46fcae]
perf[0x4a9f1e]
perf[0x4aa220]
perf(main+0x301)[0x42c561]
/lib64/libc.so.6(__libc_start_main+0xe9)[0x7fcb566cff29]
perf(_start+0x29)[0x42c999]
#
After the patch the segfault doesn't take place, a follow up patch to
tell the user why nothing changes when 'd' is pressed would be good.
Reported-by: rodia@autistici.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: f1c5fd4d0bb9 ("perf c2c report: Add TUI cacheline browser")
Link: http://lkml.kernel.org/r/20180724062008.26126-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Recently, the subtest numbering was changed to start from 1. While it
is fine for displaying results, this should not be the case when the
subtests are actually invoked.
Typically, the subtests are stored in zero-indexed arrays and invoked
based on the index passed to the main test function. Since the index
now starts from 1, the second subtest in the array (index 1) gets
invoked instead of the first (index 0). This applies to all of the
following subtests but for the last one, the subtest always fails
because it does not meet the boundary condition of the subtest index
being lesser than the number of subtests.
This can be observed on powerpc64 and x86_64 systems running Fedora 28
as shown below.
Before:
# perf test "builtin clang support"
55: builtin clang support :
55.1: builtin clang compile C source to IR : Ok
55.2: builtin clang compile C source to ELF object : FAILED!
# perf test "LLVM search and compile"
38: LLVM search and compile :
38.1: Basic BPF llvm compile : Ok
38.2: kbuild searching : Ok
38.3: Compile source for BPF prologue generation : Ok
38.4: Compile source for BPF relocation : FAILED!
# perf test "BPF filter"
40: BPF filter :
40.1: Basic BPF filtering : Ok
40.2: BPF pinning : Ok
40.3: BPF prologue generation : Ok
40.4: BPF relocation checker : FAILED!
After:
# perf test "builtin clang support"
55: builtin clang support :
55.1: builtin clang compile C source to IR : Ok
55.2: builtin clang compile C source to ELF object : Ok
# perf test "LLVM search and compile"
38: LLVM search and compile :
38.1: Basic BPF llvm compile : Ok
38.2: kbuild searching : Ok
38.3: Compile source for BPF prologue generation : Ok
38.4: Compile source for BPF relocation : Ok
# perf test "BPF filter"
40: BPF filter :
40.1: Basic BPF filtering : Ok
40.2: BPF pinning : Ok
40.3: BPF prologue generation : Ok
40.4: BPF relocation checker : Ok
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Fixes: 9ef0112442bd ("perf test: Fix subtest number when showing results")
Link: http://lkml.kernel.org/r/20180726171733.33208-1-sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
For instance:
$ trace -e socket* ssh sandy
0.000 ( 0.031 ms): ssh/19919 socket(family: LOCAL, type: STREAM|CLOEXEC|NONBLOCK ) = 3
0.052 ( 0.015 ms): ssh/19919 socket(family: LOCAL, type: STREAM|CLOEXEC|NONBLOCK ) = 3
1.568 ( 0.020 ms): ssh/19919 socket(family: LOCAL, type: STREAM|CLOEXEC|NONBLOCK ) = 3
1.603 ( 0.012 ms): ssh/19919 socket(family: LOCAL, type: STREAM|CLOEXEC|NONBLOCK ) = 3
1.699 ( 0.014 ms): ssh/19919 socket(family: LOCAL, type: STREAM|CLOEXEC|NONBLOCK ) = 3
1.724 ( 0.012 ms): ssh/19919 socket(family: LOCAL, type: STREAM|CLOEXEC|NONBLOCK ) = 3
1.804 ( 0.020 ms): ssh/19919 socket(family: INET, type: STREAM, protocol: TCP ) = 3
17.549 ( 0.098 ms): ssh/19919 socket(family: LOCAL, type: STREAM ) = 4
acme@sandy's password:
Just like with other syscall args, the common bits are supressed so that
the output is more compact, i.e. we use "TCP" instead of "IPPROTO_TCP",
but we can make this show the original constant names if we like it by
using some command line knob or ~/.perfconfig "[trace]" section
variable.
Also needed is to make perf's event parser accept things like:
$ perf trace -e socket*/protocol=TCP/
By using both the tracefs event 'format' files and these tables built
from the kernel sources.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-l39jz1vnyda0b6jsufuc8bz7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It'll be wired to 'perf trace' in the next cset.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-2i9vkvm1ik8yu4hgjmxhsyjv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We may have string tables where not all slots have values, in those
cases its better to print the numeric value, for instance:
In the table below we would show "protocol: (null)" for
socket_ipproto[3]
Where it would be better to show "protocol: 3".
$ tools/perf/trace/beauty/socket_ipproto.sh
static const char *socket_ipproto[] = {
[0] = "IP",
[103] = "PIM",
[108] = "COMP",
[12] = "PUP",
[132] = "SCTP",
[136] = "UDPLITE",
[137] = "MPLS",
[17] = "UDP",
[1] = "ICMP",
[22] = "IDP",
[255] = "RAW",
[29] = "TP",
[2] = "IGMP",
[33] = "DCCP",
[41] = "IPV6",
[46] = "RSVP",
[47] = "GRE",
[4] = "IPIP",
[50] = "ESP",
[51] = "AH",
[6] = "TCP",
[8] = "EGP",
[92] = "MTP",
[94] = "BEETPH",
[98] = "ENCAP",
};
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-7djfak94eb3b9ltr79cpn3ti@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It'll use tools/include copy of linux/in.h to generate a table to be
used by tools, initially by the 'socket' and 'socketpair' beautifiers in
'perf trace', but that could also be used to translate from a string
constant to the integer value to be used in a eBPF or tracefs tracepoint
filter.
When used without any args it produces:
$ tools/perf/trace/beauty/socket_ipproto.sh
static const char *socket_ipproto[] = {
[0] = "IP",
[103] = "PIM",
[108] = "COMP",
[12] = "PUP",
[132] = "SCTP",
[136] = "UDPLITE",
[137] = "MPLS",
[17] = "UDP",
[1] = "ICMP",
[22] = "IDP",
[255] = "RAW",
[29] = "TP",
[2] = "IGMP",
[33] = "DCCP",
[41] = "IPV6",
[46] = "RSVP",
[47] = "GRE",
[4] = "IPIP",
[50] = "ESP",
[51] = "AH",
[6] = "TCP",
[8] = "EGP",
[92] = "MTP",
[94] = "BEETPH",
[98] = "ENCAP",
};
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-v9rafqh3qn6b9kp9vfvj9f8s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We'll use it to create tables for the 'protocol' argument to the
socket syscall when the 'family' arg is one of AF_INET or AF_INET6.
Add it to check_headers.sh so that when a new protocol gets added we get
a notification during the build process.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-2amnveu1ns4emjn70xuavpje@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The 'umask' event parameter is unsupported on some architectures like
powerpc64.
This can be observed on a powerpc64le system running Fedora 27 as shown
below.
# perf test "Parse event definition strings" -v
6: Parse event definition strings :
--- start ---
test child forked, pid 45915
...
running test 3 'cpu/name='COMPLEX_CYCLES_NAME:orig=cycles,desc=chip-clock-ticks',period=0x1,event=0x2,umask=0x3/ukp'Invalid event/parameter 'umask'
Invalid event/parameter 'umask'
failed to parse event 'cpu/name='COMPLEX_CYCLES_NAME:orig=cycles,desc=chip-clock-ticks',period=0x1,event=0x2,umask=0x3/ukp', err 1, str 'unknown term'
event syntax error: '..,event=0x2,umask=0x3/ukp'
\___ unknown term
valid terms: event,mark,pmc,cache_sel,pmcxsel,unit,thresh_stop,thresh_start,combine,thresh_sel,thresh_cmp,sample_mode,config,config1,config2,name,period,freq,branch_type,time,call-graph,stack-size,no-inherit,inherit,max-stack,no-overwrite,overwrite,driver-config
mem_access -> cpu/event=0x10401e0/
running test 0 'config=10,config1,config2=3,umask=1'
test child finished with 1
---- end ----
Parse event definition strings: FAILED!
Committer testing:
After applying the patch these test passes and in verbose mode we get:
# perf test -v "event definition"
6: Parse event definition strings:
--- start ---
test child forked, pid 11061
running test 0 'syscalls:sys_enter_openat'Using CPUID GenuineIntel-6-9E
<SNIP>
running test 53 'cycles/name='COMPLEX_CYCLES_NAME:orig=cycles,desc=chip-clock-ticks'/Duk'
running test 0 'cpu/config=10,config1,config2=3,period=1000/u'
running test 1 'cpu/config=1,name=krava/u,cpu/config=2/u'
running test 2 'cpu/config=1,call-graph=fp,time,period=100000/,cpu/config=2,call-graph=no,time=0,period=2000/'
running test 3 'cpu/name='COMPLEX_CYCLES_NAME:orig=cycles,desc=chip-clock-ticks',period=0x1,event=0x2/ukp'
<SNIP>
test child finished with 0
---- end ----
Parse event definition strings: Ok
#
Suggested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Fixes: 06dc5bf21f3f ("perf tests: Check that complex event name is parsed correctly")
Link: http://lkml.kernel.org/r/20180726105502.31670-1-sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
'perf record' will error out if both --delay and LBR are applied.
For example:
# perf record -D 1000 -a -e cycles -j any -- sleep 2
Error:
dummy:HG: PMU Hardware doesn't support sampling/overflow-interrupts.
Try 'perf stat'
#
A dummy event is added implicitly for initial delay, which has the same
configurations as real sampling events. The dummy event is a software
event. If LBR is configured, perf must error out.
The dummy event will only be used to track PERF_RECORD_MMAP while perf
waits for the initial delay to enable the real events. The BRANCH_STACK
bit can be safely cleared for the dummy event.
After applying the patch:
# perf record -D 1000 -a -e cycles -j any -- sleep 2
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.054 MB perf.data (828 samples) ]
#
Reported-by: Sunil K Pandey <sunil.k.pandey@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1531145722-16404-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Useful when checking the effects of header synchs for the files it uses
as a input to generate string tables, in retrospect this is how it
should've been done from day 1, not requiring the header_dir to be set
on the Makefile, will change everything later, so that the only parm,
common to all generators will be $(srctree) and $(beauty_outdir).
So, to see what it generates, just call it without any parameters:
$ tools/perf/trace/beauty/vhost_virtio_ioctl.sh
static const char *vhost_virtio_ioctl_cmds[] = {
[0x00] = "SET_FEATURES",
[0x01] = "SET_OWNER",
[0x02] = "RESET_OWNER",
[0x03] = "SET_MEM_TABLE",
[0x04] = "SET_LOG_BASE",
[0x07] = "SET_LOG_FD",
[0x10] = "SET_VRING_NUM",
[0x11] = "SET_VRING_ADDR",
[0x12] = "SET_VRING_BASE",
[0x13] = "SET_VRING_ENDIAN",
[0x14] = "GET_VRING_ENDIAN",
[0x20] = "SET_VRING_KICK",
[0x21] = "SET_VRING_CALL",
[0x22] = "SET_VRING_ERR",
[0x23] = "SET_VRING_BUSYLOOP_TIMEOUT",
[0x24] = "GET_VRING_BUSYLOOP_TIMEOUT",
[0x30] = "NET_SET_BACKEND",
[0x40] = "SCSI_SET_ENDPOINT",
[0x41] = "SCSI_CLEAR_ENDPOINT",
[0x42] = "SCSI_GET_ABI_VERSION",
[0x43] = "SCSI_SET_EVENTS_MISSED",
[0x44] = "SCSI_GET_EVENTS_MISSED",
[0x60] = "VSOCK_SET_GUEST_CID",
[0x61] = "VSOCK_SET_RUNNING",
};
static const char *vhost_virtio_ioctl_read_cmds[] = {
[0x00] = "GET_FEATURES",
[0x12] = "GET_VRING_BASE",
};
$
Or:
$ tools/perf/trace/beauty/sndrv_pcm_ioctl.sh
static const char *sndrv_pcm_ioctl_cmds[] = {
[0x00] = "PVERSION",
[0x01] = "INFO",
[0x02] = "TSTAMP",
[0x03] = "TTSTAMP",
[0x04] = "USER_PVERSION",
[0x10] = "HW_REFINE",
[0x11] = "HW_PARAMS",
[0x12] = "HW_FREE",
[0x13] = "SW_PARAMS",
[0x20] = "STATUS",
[0x21] = "DELAY",
[0x22] = "HWSYNC",
[0x23] = "SYNC_PTR",
[0x24] = "STATUS_EXT",
[0x32] = "CHANNEL_INFO",
[0x40] = "PREPARE",
[0x41] = "RESET",
[0x42] = "START",
[0x43] = "DROP",
[0x44] = "DRAIN",
[0x45] = "PAUSE",
[0x46] = "REWIND",
[0x47] = "RESUME",
[0x48] = "XRUN",
[0x49] = "FORWARD",
[0x50] = "WRITEI_FRAMES",
[0x51] = "READI_FRAMES",
[0x52] = "WRITEN_FRAMES",
[0x53] = "READN_FRAMES",
[0x60] = "LINK",
[0x61] = "UNLINK",
};
$
Etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-90am4vm8hh1osms894dp2otr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up fixes.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
- Update the tools copy of several files, including perf_event.h,
powerpc's asm/unistd.h (new io_pgetevents syscall), bpf.h and
x86's memcpy_64.s (used in 'perf bench mem'), silencing the
respective warnings during the perf tools build.
- Fix the build on the alpine:edge distro.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Pull networking fixes from David Miller:
"Several smallish fixes, I don't think any of this requires another -rc
but I'll leave that up to you:
1) Don't leak uninitialzed bytes to userspace in xfrm_user, from Eric
Dumazet.
2) Route leak in xfrm_lookup_route(), from Tommi Rantala.
3) Premature poll() returns in AF_XDP, from Björn Töpel.
4) devlink leak in netdevsim, from Jakub Kicinski.
5) Don't BUG_ON in fib_compute_spec_dst, the condition can
legitimately happen. From Lorenzo Bianconi.
6) Fix some spectre v1 gadgets in generic socket code, from Jeremy
Cline.
7) Don't allow user to bind to out of range multicast groups, from
Dmitry Safonov with a follow-up by Dmitry Safonov.
8) Fix metrics leak in fib6_drop_pcpu_from(), from Sabrina Dubroca"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits)
netlink: Don't shift with UB on nlk->ngroups
net/ipv6: fix metrics leak
xen-netfront: wait xenbus state change when load module manually
can: ems_usb: Fix memory leak on ems_usb_disconnect()
openvswitch: meter: Fix setting meter id for new entries
netlink: Do not subscribe to non-existent groups
NET: stmmac: align DMA stuff to largest cache line length
tcp_bbr: fix bw probing to raise in-flight data for very small BDPs
net: socket: Fix potential spectre v1 gadget in sock_is_registered
net: socket: fix potential spectre v1 gadget in socketcall
net: mdio-mux: bcm-iproc: fix wrong getter and setter pair
ipv4: remove BUG_ON() from fib_compute_spec_dst
enic: handle mtu change for vf properly
net: lan78xx: fix rx handling before first packet is send
nfp: flower: fix port metadata conversion bug
bpf: use GFP_ATOMIC instead of GFP_KERNEL in bpf_parse_prog()
bpf: fix bpf_skb_load_bytes_relative pkt length check
perf build: Build error in libbpf missing initialization
net: ena: Fix use of uninitialized DMA address bits field
bpf: btf: Use exact btf value_size match in map_check_btf()
...
|
|
I hit the following problem when I tried to use bpftool
to dump a percpu array.
$ sudo ./bpftool map show
61: percpu_array name stub flags 0x0
key 4B value 4B max_entries 1 memlock 4096B
...
$ sudo ./bpftool map dump id 61
bpftool: malloc.c:2406: sysmalloc: Assertion
`(old_top == initial_top (av) && old_size == 0) || \
((unsigned long) (old_size) >= MINSIZE && \
prev_inuse (old_top) && \
((unsigned long) old_end & (pagesize - 1)) == 0)'
failed.
Aborted
Further debugging revealed that this is due to
miscommunication between bpftool and kernel.
For example, for the above percpu_array with value size of 4B.
The map info returned to user space has value size of 4B.
In bpftool, the values array for lookup is allocated like:
info->value_size * get_possible_cpus() = 4 * get_possible_cpus()
In kernel (kernel/bpf/syscall.c), the values array size is
rounded up to multiple of 8.
round_up(map->value_size, 8) * num_possible_cpus()
= 8 * num_possible_cpus()
So when kernel copies the values to user buffer, the kernel will
overwrite beyond user buffer boundary.
This patch fixed the issue by allocating and stepping through
percpu map value array properly in bpftool.
Fixes: 71bb428fe2c19 ("tools: bpf: add bpftool")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
The UAPI file byteorder/little_endian.h uses the __always_inline define
without including the header where it is defined, linux/stddef.h, this
ends up working in all the other distros because that file gets included
seemingly by luck from one of the files included from little_endian.h.
But not on Alpine:edge, that fails for all files where perf_event.h is
included but linux/stddef.h isn't include before that.
Adding the missing linux/stddef.h file where it breaks on Alpine:edge to
fix that, in all other distros, that is just a very small header anyway.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-9r1pifftxvuxms8l7ir73p5l@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To cope with the changes in:
12c89130a56a ("x86/asm/memcpy_mcsafe: Add write-protection-fault handling")
60622d68227d ("x86/asm/memcpy_mcsafe: Return bytes remaining")
bd131544aa7e ("x86/asm/memcpy_mcsafe: Add labels for __memcpy_mcsafe() write fault handling")
da7bc9c57eb0 ("x86/asm/memcpy_mcsafe: Remove loop unrolling")
This needed introducing a file with a copy of the mcsafe_handle_tail()
function, that is used in the new memcpy_64.S file, as well as a dummy
mcsafe_test.h header.
Testing it:
$ nm ~/bin/perf | grep mcsafe
0000000000484130 T mcsafe_handle_tail
0000000000484300 T __memcpy_mcsafe
$
$ perf bench mem memcpy
# Running 'mem/memcpy' benchmark:
# function 'default' (Default memcpy() provided by glibc)
# Copying 1MB bytes ...
44.389205 GB/sec
# function 'x86-64-unrolled' (unrolled memcpy() in arch/x86/lib/memcpy_64.S)
# Copying 1MB bytes ...
22.710756 GB/sec
# function 'x86-64-movsq' (movsq-based memcpy() in arch/x86/lib/memcpy_64.S)
# Copying 1MB bytes ...
42.459239 GB/sec
# function 'x86-64-movsb' (movsb-based memcpy() in arch/x86/lib/memcpy_64.S)
# Copying 1MB bytes ...
42.459239 GB/sec
$
This silences this perf tools build warning:
Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S'
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mika Penttilä <mika.penttila@nextfour.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-igdpciheradk3gb3qqal52d0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To get the changes in:
4c79579b44b1 ("bpf: Change bpf_fib_lookup to return lookup status")
That do not entail changes in tools/perf/ use of it, elliminating the
following perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/bpf.h' differs from latest version at 'include/uapi/linux/bpf.h'
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-yei494y6b3mn6bjzz9g0ws12@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The new 'io_pgetevents' syscall was wired up in PowerPC in the following
cset:
b2f82565f2ca ("powerpc: Wire up io_pgetevents")
Update tools/arch/powerpc/ copy of the asm/unistd.h file so that 'perf
trace' on PowerPC gets it in its syscall table.
This elliminated the following perf build warning:
Warning: Kernel ABI header at 'tools/arch/powerpc/include/uapi/asm/unistd.h' differs from latest version at 'arch/powerpc/include/uapi/asm/unistd.h'
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Breno Leitao <leitao@debian.org>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: https://lkml.kernel.org/n/tip-9uvu7tz4ud3bxxfyxwryuz47@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To get the changes in:
6cbc304f2f36 ("perf/x86/intel: Fix unwind errors from PEBS entries (mk-II)")
That do not imply any changes in the tooling side, the (ab)use of
sample_type is entirely done in kernel space, nothing for userspace to
witness here.
This cures the following warning during perf's build:
Warning: Kernel ABI header at 'tools/include/uapi/linux/perf_event.h' differs from latest version at 'include/uapi/linux/perf_event.h'
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-o64mjoy35s9gd1gitunw1zg4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|