summaryrefslogtreecommitdiffstats
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2017-01-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-26/+27
Pull networking fixes from David Miller: 1) GTP fixes from Andreas Schultz (missing genl module alias, clear IP DF on transmit). 2) Netfilter needs to reflect the fwmark when sending resets, from Pau Espin Pedrol. 3) nftable dump OOPS fix from Liping Zhang. 4) Fix erroneous setting of VIRTIO_NET_HDR_F_DATA_VALID on transmit, from Rolf Neugebauer. 5) Fix build error of ipt_CLUSTERIP when procfs is disabled, from Arnd Bergmann. 6) Fix regression in handling of NETIF_F_SG in harmonize_features(), from Eric Dumazet. 7) Fix RTNL deadlock wrt. lwtunnel module loading, from David Ahern. 8) tcp_fastopen_create_child() needs to setup tp->max_window, from Alexey Kodanev. 9) Missing kmemdup() failure check in ipv6 segment routing code, from Eric Dumazet. 10) Don't execute unix_bind() under the bindlock, otherwise we deadlock with splice. From WANG Cong. 11) ip6_tnl_parse_tlv_enc_lim() potentially reallocates the skb buffer, therefore callers must reload cached header pointers into that skb. Fix from Eric Dumazet. 12) Fix various bugs in legacy IRQ fallback handling in alx driver, from Tobias Regnery. 13) Do not allow lwtunnel drivers to be unloaded while they are referenced by active instances, from Robert Shearman. 14) Fix truncated PHY LED trigger names, from Geert Uytterhoeven. 15) Fix a few regressions from virtio_net XDP support, from John Fastabend and Jakub Kicinski. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (102 commits) ISDN: eicon: silence misleading array-bounds warning net: phy: micrel: add support for KSZ8795 gtp: fix cross netns recv on gtp socket gtp: clear DF bit on GTP packet tx gtp: add genl family modules alias tcp: don't annotate mark on control socket from tcp_v6_send_response() ravb: unmap descriptors when freeing rings virtio_net: reject XDP programs using header adjustment virtio_net: use dev_kfree_skb for small buffer XDP receive r8152: check rx after napi is enabled r8152: re-schedule napi for tx r8152: avoid start_xmit to schedule napi when napi is disabled r8152: avoid start_xmit to call napi_schedule during autosuspend net: dsa: Bring back device detaching in dsa_slave_suspend() net: phy: leds: Fix truncated LED trigger names net: phy: leds: Break dependency of phy.h on phy_led_triggers.h net: phy: leds: Clear phy_num_led_triggers on failure to avoid crash net-next: ethernet: mediatek: change the compatible string Documentation: devicetree: change the mediatek ethernet compatible string bnxt_en: Fix RTNL lock usage on bnxt_get_port_module_status(). ...
2017-01-22Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds2-2/+15
Pull virtio/vhost fixes from Michael Tsirkin: "Random fixes and cleanups that accumulated over the time" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio/s390: virtio: constify virtio_config_ops structures virtio/s390: add missing \n to end of dev_err message virtio/s390: support READ_STATUS command for virtio-ccw tools/virtio/ringtest: tweaks for s390 tools/virtio/ringtest: fix run-on-all.sh for offline cpus virtio_console: fix a crash in config_work_handler vhost/scsi: silence uninitialized variable warning vhost: scsi: constify target_core_fabric_ops structures
2017-01-21Merge tag 'powerpc-4.10-2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Two fixes for fallout from the hugetlb changes we merged this cycle. Ten other fixes, four only affect Power9, and the rest are a bit of a mixture though nothing terrible. Thanks to: Aneesh Kumar K.V, Anton Blanchard, Benjamin Herrenschmidt, Dave Martin, Gavin Shan, Madhavan Srinivasan, Nicholas Piggin, Reza Arbab" * tag 'powerpc-4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Ignore reserved field in DCSR and PVR reads and writes powerpc/ptrace: Preserve previous TM fprs/vsrs on short regset write powerpc/ptrace: Preserve previous fprs/vsrs on short regset write powerpc/perf: Use MSR to report privilege level on P9 DD1 selftest/powerpc: Wrong PMC initialized in pmc56_overflow test powerpc/eeh: Enable IO path on permanent error powerpc/perf: Fix PM_BRU_CMPL event code for power9 powerpc/mm: Fix little-endian 4K hugetlb powerpc/mm/hugetlb: Don't panic when we don't find the default huge page size powerpc: Fix pgtable pmd cache init powerpc/icp-opal: Fix missing KVM case and harden replay powerpc/mm: Fix memory hotplug BUG() on radix
2017-01-19tools/virtio/ringtest: tweaks for s390Halil Pasic1-0/+12
Make ringtest work on s390 too. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Acked-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2017-01-19tools/virtio/ringtest: fix run-on-all.sh for offline cpusHalil Pasic1-2/+3
Since ef1b144d ("tools/virtio/ringtest: fix run-on-all.sh to work without /dev/cpu") run-on-all.sh uses seq 0 $HOST_AFFINITY as the list of ids of the CPUs to run the command on (assuming ids of online CPUs are consecutive and start from 0), where $HOST_AFFINITY is the highest CPU id in the system previously determined using lscpu. This can fail on systems with offline CPUs. Instead let's use lscpu to determine the list of online CPUs. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Fixes: ef1b144d ("tools/virtio/ringtest: fix run-on-all.sh to work without /dev/cpu") Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2017-01-18selftest/powerpc: Wrong PMC initialized in pmc56_overflow testMadhavan Srinivasan1-1/+1
Test uses PMC2 to count the event. But PMC1 is being initialized. Patch to fix it. Fixes: 3752e453f6ba ('selftests/powerpc: Add tests of PMU EBBs') Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-17bpf: Fix test_lru_sanity5() in test_lru_map.cMartin KaFai Lau1-26/+27
test_lru_sanity5() fails when the number of online cpus is fewer than the number of possible cpus. It can be reproduced with qemu by using cmd args "--smp cpus=2,maxcpus=8". The problem is the loop in test_lru_sanity5() is testing 'i' which is incorrect. This patch: 1. Make sched_next_online() always return -1 if it cannot find a next cpu to schedule the process. 2. In test_lru_sanity5(), the parent process does sched_setaffinity() first (through sched_next_online()) and the forked process will inherit it according to the 'man sched_setaffinity'. Fixes: 5db58faf989f ("bpf: Add tests for the LRU bpf_htab") Reported-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-17Merge tag 'perf-urgent-for-mingo-4.10-20170117' of ↵Ingo Molnar3-41/+72
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull 'perf probe' fixes from Arnaldo Carvalho de Melo <acme@redhat.com> - Show correct locations for 'perf probe' on modules (Masami Hiramatsu) - Correctly handle 'perf probe's on GCC generated functions in modules (Masami Hiramatsu) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-16perf probe: Fix to probe on gcc generated functions in modulesMasami Hiramatsu3-18/+37
Fix to probe on gcc generated functions on modules. Since probing on a module is based on its symbol name, it should be adjusted on actual symbols. E.g. without this fix, perf probe shows probe definition on non-exist symbol as below. $ perf probe -m build-x86_64/net/netfilter/nf_nat.ko -F in_range* in_range.isra.12 $ perf probe -m build-x86_64/net/netfilter/nf_nat.ko -D in_range p:probe/in_range nf_nat:in_range+0 With this fix, perf probe correctly shows a probe on gcc-generated symbol. $ perf probe -m build-x86_64/net/netfilter/nf_nat.ko -D in_range p:probe/in_range nf_nat:in_range.isra.12+0 This also fixes same problem on online module as below. $ perf probe -m i915 -D assert_plane p:probe/assert_plane i915:assert_plane.constprop.134+0 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/148411450673.9978.14905987549651656075.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-16perf probe: Add error checks to offline probe post-processingMasami Hiramatsu1-17/+33
Add error check codes on post processing and improve it for offline probe events as: - post processing fails if no matched symbol found in map(-ENOENT) or strdup() failed(-ENOMEM). - Even if the symbol name is the same, it updates symbol address and offset. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/148411443738.9978.4617979132625405545.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-16perf probe: Fix to show correct locations for events on modulesMasami Hiramatsu1-7/+3
Fix to show correct locations for events on modules by relocating given address instead of retrying after failure. This happens when the module text size is big enough, bigger than sh_addr, because the original code retries with given address + sh_addr if it failed to find CU DIE at the given address. Any address smaller than sh_addr always fails and it retries with the correct address, but addresses bigger than sh_addr will get a CU DIE which is on the given address (not adjusted by sh_addr). In my environment(x86-64), the sh_addr of ".text" section is 0x10030. Since i915 is a huge kernel module, we can see this issue as below. $ grep "[Tt] .*\[i915\]" /proc/kallsyms | sort | head -n1 ffffffffc0270000 t i915_switcheroo_can_switch [i915] ffffffffc0270000 + 0x10030 = ffffffffc0280030, so we'll check symbols cross this boundary. $ grep "[Tt] .*\[i915\]" /proc/kallsyms | grep -B1 ^ffffffffc028\ | head -n 2 ffffffffc027ff80 t haswell_init_clock_gating [i915] ffffffffc0280110 t valleyview_init_clock_gating [i915] So setup probes on both function and see what happen. $ sudo ./perf probe -m i915 -a haswell_init_clock_gating \ -a valleyview_init_clock_gating Added new events: probe:haswell_init_clock_gating (on haswell_init_clock_gating in i915) probe:valleyview_init_clock_gating (on valleyview_init_clock_gating in i915) You can now use it in all perf tools, such as: perf record -e probe:valleyview_init_clock_gating -aR sleep 1 $ sudo ./perf probe -l probe:haswell_init_clock_gating (on haswell_init_clock_gating@gpu/drm/i915/intel_pm.c in i915) probe:valleyview_init_clock_gating (on i915_vga_set_decode:4@gpu/drm/i915/i915_drv.c in i915) As you can see, haswell_init_clock_gating is correctly shown, but valleyview_init_clock_gating is not. With this patch, both events are shown correctly. $ sudo ./perf probe -l probe:haswell_init_clock_gating (on haswell_init_clock_gating@gpu/drm/i915/intel_pm.c in i915) probe:valleyview_init_clock_gating (on valleyview_init_clock_gating@gpu/drm/i915/intel_pm.c in i915) Committer notes: In my case: # perf probe -m i915 -a haswell_init_clock_gating -a valleyview_init_clock_gating Added new events: probe:haswell_init_clock_gating (on haswell_init_clock_gating in i915) probe:valleyview_init_clock_gating (on valleyview_init_clock_gating in i915) You can now use it in all perf tools, such as: perf record -e probe:valleyview_init_clock_gating -aR sleep 1 # perf probe -l probe:haswell_init_clock_gating (on i915_getparam+432@gpu/drm/i915/i915_drv.c in i915) probe:valleyview_init_clock_gating (on __i915_printk+240@gpu/drm/i915/i915_drv.c in i915) # # readelf -SW /lib/modules/4.9.0+/build/vmlinux | egrep -w '.text|Name' [Nr] Name Type Address Off Size ES Flg Lk Inf Al [ 1] .text PROGBITS ffffffff81000000 200000 822fd3 00 AX 0 0 4096 # So both are b0rked, now with the fix: # perf probe -m i915 -a haswell_init_clock_gating -a valleyview_init_clock_gating Added new events: probe:haswell_init_clock_gating (on haswell_init_clock_gating in i915) probe:valleyview_init_clock_gating (on valleyview_init_clock_gating in i915) You can now use it in all perf tools, such as: perf record -e probe:valleyview_init_clock_gating -aR sleep 1 # perf probe -l probe:haswell_init_clock_gating (on haswell_init_clock_gating@gpu/drm/i915/intel_pm.c in i915) probe:valleyview_init_clock_gating (on valleyview_init_clock_gating@gpu/drm/i915/intel_pm.c in i915) # Both looks correct. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/148411436777.9978.1440275861947194930.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-15Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds9-45/+107
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Misc race fixes uncovered by fuzzing efforts, a Sparse fix, two PMU driver fixes, plus miscellanous tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86: Reject non sampling events with precise_ip perf/x86/intel: Account interrupts for PEBS errors perf/core: Fix concurrent sys_perf_event_open() vs. 'move_group' race perf/core: Fix sys_perf_event_open() vs. hotplug perf/x86/intel: Use ULL constant to prevent undefined shift behaviour perf/x86/intel/uncore: Fix hardcoded socket 0 assumption in the Haswell init code perf/x86: Set pmu->module in Intel PMU modules perf probe: Fix to probe on gcc generated symbols for offline kernel perf probe: Fix --funcs to show correct symbols for offline module perf symbols: Robustify reading of build-id from sysfs perf tools: Install tools/lib/traceevent plugins with install-bin tools lib traceevent: Fix prev/next_prio for deadline tasks perf record: Fix --switch-output documentation and comment perf record: Make __record_options static tools lib subcmd: Add OPT_STRING_OPTARG_SET option perf probe: Fix to get correct modname from elf header samples/bpf trace_output_user: Remove duplicate sys/ioctl.h include samples/bpf sock_example: Avoid getting ethhdr from two includes perf sched timehist: Show total scheduling time
2017-01-11Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-1/+0
Merge fixes from Andrew Morton: "27 fixes. There are three patches that aren't actually fixes. They're simple function renamings which are nice-to-have in mainline as ongoing net development depends on them." * akpm: (27 commits) timerfd: export defines to userspace mm/hugetlb.c: fix reservation race when freeing surplus pages mm/slab.c: fix SLAB freelist randomization duplicate entries zram: support BDI_CAP_STABLE_WRITES zram: revalidate disk under init_lock mm: support anonymous stable page mm: add documentation for page fragment APIs mm: rename __page_frag functions to __page_frag_cache, drop order from drain mm: rename __alloc_page_frag to page_frag_alloc and __free_page_frag to page_frag_free mm, memcg: fix the active list aging for lowmem requests when memcg is enabled mm: don't dereference struct page fields of invalid pages mailmap: add codeaurora.org names for nameless email commits signal: protect SIGNAL_UNKILLABLE from unintentional clearing. mm: pmd dirty emulation in page fault handler ipc/sem.c: fix incorrect sem_lock pairing lib/Kconfig.debug: fix frv build failure mm: get rid of __GFP_OTHER_NODE mm: fix remote numa hits statistics mm: fix devm_memremap_pages crash, use mem_hotplug_{begin, done} ocfs2: fix crash caused by stale lvb with fsdlm plugin ...
2017-01-10mm: get rid of __GFP_OTHER_NODEMichal Hocko1-1/+0
The flag was introduced by commit 78afd5612deb ("mm: add __GFP_OTHER_NODE flag") to allow proper accounting of remote node allocations done by kernel daemons on behalf of a process - e.g. khugepaged. After "mm: fix remote numa hits statistics" we do not need and actually use the flag so we can safely remove it because all allocations which are satisfied from their "home" node are accounted properly. [mhocko@suse.com: fix build] Link: http://lkml.kernel.org/r/20170106122225.GK5556@dhcp22.suse.cz Link: http://lkml.kernel.org/r/20170102153057.9451-3-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-05selftests: x86/pkeys: fix spelling mistake: "itertation" -> "iteration"Colin King1-1/+1
Fix spelling mistake in print test pass message. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-01-05selftests: do not require bash to run netsocktests testcaseRolf Eike Beer1-1/+1
Nothing in this minimal script seems to require bash. We often run these tests on embedded devices where the only shell available is the busybox ash. Use sh instead. Signed-off-by: Rolf Eike Beer <eb@emlix.com> Cc: stable@vger.kernel.org Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-01-05selftests: do not require bash to run bpf testsRolf Eike Beer1-1/+1
Nothing in this minimal script seems to require bash. We often run these tests on embedded devices where the only shell available is the busybox ash. Use sh instead. Signed-off-by: Rolf Eike Beer <eb@emlix.com> Cc: stable@vger.kernel.org Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-01-05selftests: do not require bash for the generated testRolf Eike Beer1-1/+1
Nothing in this minimal script seems to require bash. We often run these tests on embedded devices where the only shell available is the busybox ash. Use sh instead. Signed-off-by: Rolf Eike Beer <eb@emlix.com> Cc: stable@vger.kernel.org Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-01-05Merge tag 'perf-urgent-for-mingo-4.10-20170104' of ↵Ingo Molnar9-45/+107
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes and one improvement from Arnaldo Carvalho de Melo: Fixes: - Fix prev/next_prio formatting for deadline tasks in libtraceevent (Daniel Bristot de Oliveira) - Robustify reading of build-ids from /sys/kernel/note (Arnaldo Carvalho de Melo) - Fix building some sample/bpf in Alpine Linux 3.4 (Arnaldo Carvalho de Melo) - Fix 'make install-bin' to install libtraceevent plugins (Arnaldo Carvalho de Melo) - Fix 'perf record --switch-output' documentation and comment (Jiri Olsa) - Fix 'perf probe' for cross arch probing (Masami Hiramatsu) Improvement: - Show total scheduling time in 'perf sched timehist' (Namhyumg Kim) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-04perf probe: Fix to probe on gcc generated symbols for offline kernelMasami Hiramatsu1-1/+47
Fix perf-probe to show probe definition on gcc generated symbols for offline kernel (including cross-arch kernel image). gcc sometimes optimizes functions and generate new symbols with suffixes such as ".constprop.N" or ".isra.N" etc. Since those symbol names are not recorded in DWARF, we have to find correct generated symbols from offline ELF binary to probe on it (kallsyms doesn't correct it). For online kernel or uprobes we don't need it because those are rebased on _text, or a section relative address. E.g. Without this: $ perf probe -k build-arm/vmlinux -F __slab_alloc* __slab_alloc.constprop.9 $ perf probe -k build-arm/vmlinux -D __slab_alloc p:probe/__slab_alloc __slab_alloc+0 If you put above definition on target machine, it should fail because there is no __slab_alloc in kallsyms. With this fix, perf probe shows correct probe definition on __slab_alloc.constprop.9: $ perf probe -k build-arm/vmlinux -D __slab_alloc p:probe/__slab_alloc __slab_alloc.constprop.9+0 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/148350060434.19001.11864836288580083501.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-04perf probe: Fix --funcs to show correct symbols for offline moduleMasami Hiramatsu1-19/+6
Fix --funcs (-F) option to show correct symbols for offline module. Since previous perf-probe uses machine__findnew_module_map() for offline module, even if user passes a module file (with full path) which is for other architecture, perf-probe always tries to load symbol map for current kernel module. This fix uses dso__new_map() to load the map from given binary as same as a map for user applications. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/148350053478.19001.15435255244512631545.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-03perf symbols: Robustify reading of build-id from sysfsArnaldo Carvalho de Melo1-0/+6
Markus reported that perf segfaults when reading /sys/kernel/notes from a kernel linked with GNU gold, due to what looks like a gold bug, so do some bounds checking to avoid crashing in that case. Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Report-Link: http://lkml.kernel.org/r/20161219161821.GA294@x4 Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-ryhgs6a6jxvz207j2636w31c@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-03perf tools: Install tools/lib/traceevent plugins with install-binArnaldo Carvalho de Melo1-2/+2
Those are binaries as well, so should be installed by: make -C tools/perf install-bin' too. Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Daniel Bristot de Oliveira <bristot@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/n/tip-3841b37u05evxrs1igkyu6ks@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-03tools lib traceevent: Fix prev/next_prio for deadline tasksDaniel Bristot de Oliveira1-2/+2
Currently, the sched:sched_switch tracepoint reports deadline tasks with priority -1. But when reading the trace via perf script I've got the following output: # ./d & # (d is a deadline task, see [1]) # perf record -e sched:sched_switch -a sleep 1 # perf script ... swapper 0 [000] 2146.962441: sched:sched_switch: swapper/0:0 [120] R ==> d:2593 [4294967295] d 2593 [000] 2146.972472: sched:sched_switch: d:2593 [4294967295] R ==> g:2590 [4294967295] The task d reports the wrong priority [4294967295]. This happens because the "int prio" is stored in an unsigned long long val. Although it is set as a %lld, as int is shorter than unsigned long long, trace_seq_printf prints it as a positive number. The fix is just to cast the val as an int, and print it as a %d, as in the sched:sched_switch tracepoint's "format". The output with the fix is: # ./d & # perf record -e sched:sched_switch -a sleep 1 # perf script ... swapper 0 [000] 4306.374037: sched:sched_switch: swapper/0:0 [120] R ==> d:10941 [-1] d 10941 [000] 4306.383823: sched:sched_switch: d:10941 [-1] R ==> swapper/0:0 [120] [1] d.c --- #include <stdio.h> #include <unistd.h> #include <sys/syscall.h> #include <linux/types.h> #include <linux/sched.h> struct sched_attr { __u32 size, sched_policy; __u64 sched_flags; __s32 sched_nice; __u32 sched_priority; __u64 sched_runtime, sched_deadline, sched_period; }; int sched_setattr(pid_t pid, const struct sched_attr *attr, unsigned int flags) { return syscall(__NR_sched_setattr, pid, attr, flags); } int main(void) { struct sched_attr attr = { .size = sizeof(attr), .sched_policy = SCHED_DEADLINE, /* This creates a 10ms/30ms reservation */ .sched_runtime = 10 * 1000 * 1000, .sched_period = attr.sched_deadline = 30 * 1000 * 1000, }; if (sched_setattr(0, &attr, 0) < 0) { perror("sched_setattr"); return -1; } for(;;); } --- Committer notes: Got the program from the provided URL, http://bristot.me/lkml/d.c, trimmed it and included in the cset log above, so that we have everything needed to test it in one place. Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Daniel Bristot de Oliveira <bristot@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/866ef75bcebf670ae91c6a96daa63597ba981f0d.1483443552.git.bristot@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-03perf record: Fix --switch-output documentation and commentJiri Olsa2-1/+5
There's no --signal-trigger option, also adding the code comment into record man page. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Wang Nan <wangnan0@huawei.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1483431600-19887-4-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-03perf record: Make __record_options staticJiri Olsa1-1/+1
There's no need for this one to be global. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Wang Nan <wangnan0@huawei.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1483431600-19887-3-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-03tools lib subcmd: Add OPT_STRING_OPTARG_SET optionJiri Olsa2-0/+8
To allow string options with a default argument and variable set when the option is used. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Wang Nan <wangnan0@huawei.com> Cc: David Ahern <dsahern@gmail.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1483431600-19887-2-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-02perf probe: Fix to get correct modname from elf headerMasami Hiramatsu1-16/+16
Since 'perf probe' supports cross-arch probes, it is possible to analyze different arch kernel image which has different bits-per-long. In that case, it fails to get the module name because it uses the MOD_NAME_OFFSET macro based on the host machine bits-per-long, instead of the target arch bits-per-long. This fixes above issue by changing modname-offset based on the target archs bit width. This is ok because linux kernel uses LP64 model on 64bit arch. E.g. without this (on x86_64, and target module is arm32): $ perf probe -m build-arm/fs/configfs/configfs.ko -D configfs_lookup p:probe/configfs_lookup :configfs_lookup+0 ^-Here is an empty module name. With this fix, you can see correct module name: $ perf probe -m build-arm/fs/configfs/configfs.ko -D configfs_lookup p:probe/configfs_lookup configfs:configfs_lookup+0 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/148337043836.6752.383495516397005695.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-27perf sched timehist: Show total scheduling timeNamhyung Kim1-3/+14
Show length of analyzed sample time and rate of idle task running. This also takes care of time range given by --time option. $ perf sched timehist -sI | tail Samples do not have callchains. Idle stats: CPU 0 idle for 930.316 msec ( 92.93%) CPU 1 idle for 963.614 msec ( 96.25%) CPU 2 idle for 885.482 msec ( 88.45%) CPU 3 idle for 938.635 msec ( 93.76%) Total number of unique tasks: 118 Total number of context switches: 2337 Total run time (msec): 3718.048 Total scheduling time (msec): 1001.131 (x 4) Suggested-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20161222060350.17655-3-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-25Merge branch 'turbostat' of ↵Linus Torvalds3-371/+673
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull turbostat updates from Len Brown. * 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: remove obsolete -M, -m, -C, -c options tools/power turbostat: Make extensible via the --add parameter tools/power turbostat: Denverton uses a 25 MHz crystal, not 19.2 MHz tools/power turbostat: line up headers when -M is used tools/power turbostat: fix SKX PKG_CSTATE_LIMIT decoding tools/power turbostat: Support Knights Mill (KNM) tools/power turbostat: Display HWP OOB status tools/power turbostat: fix Denverton BCLK tools/power turbostat: use intel-family.h model strings tools/power/turbostat: Add Denverton RAPL support tools/power/turbostat: Add Denverton support tools/power/turbostat: split core MSR support into status + limit tools/power turbostat: fix error case overflow read of slm_freq_table[] tools/power turbostat: Allocate correct amount of fd and irq entries tools/power turbostat: switch to tab delimited output tools/power turbostat: Gracefully handle ACPI S3 tools/power turbostat: tidy up output on Joule counter overflow
2016-12-24tools/power turbostat: remove obsolete -M, -m, -C, -c optionsLen Brown2-110/+2
The new --add option has replaced the -M, -m, -C, -c options Eg. -M 0x10 is now --add msr0x10,raw -m 0x10 is now --add msr0x10,raw,u32 -C 0x10 is now --add msr0x10,delta -c 0x10 is now --add msr0x10,delta,u32 The --add option can be repeated to add any number of counters, while the previous options were limited to adding one of each type. In addition, the --add option can accept a column label, and can also display a counter as a percentage of elapsed cycles. Eg. --add msr0x3fe,core,percent,MY_CC3 Signed-off-by: Len Brown <len.brown@intel.com>
2016-12-24tools/power turbostat: Make extensible via the --add parameterLen Brown2-9/+409
Create the "--add" parameter. This can be used to teach an existing turbostat binary about any number of any type of counter. turbostat(8) details the syntax for --add. Signed-off-by: Len Brown <len.brown@intel.com>
2016-12-23Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds27-405/+865
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "On the kernel side there's two x86 PMU driver fixes and a uprobes fix, plus on the tooling side there's a number of fixes and some late updates" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) perf sched timehist: Fix invalid period calculation perf sched timehist: Remove hardcoded 'comm_width' check at print_summary perf sched timehist: Enlarge default 'comm_width' perf sched timehist: Honour 'comm_width' when aligning the headers perf/x86: Fix overlap counter scheduling bug perf/x86/pebs: Fix handling of PEBS buffer overflows samples/bpf: Move open_raw_sock to separate header samples/bpf: Remove perf_event_open() declaration samples/bpf: Be consistent with bpf_load_program bpf_insn parameter tools lib bpf: Add bpf_prog_{attach,detach} samples/bpf: Switch over to libbpf perf diff: Do not overwrite valid build id perf annotate: Don't throw error for zero length symbols perf bench futex: Fix lock-pi help string perf trace: Check if MAP_32BIT is defined (again) samples/bpf: Make perf_event_read() static uprobes: Fix uprobes on MIPS, allow for a cache flush after ixol breakpoint creation samples/bpf: Make samples more libbpf-centric tools lib bpf: Add flags to bpf_create_map() tools lib bpf: use __u32 from linux/types.h ...
2016-12-22perf sched timehist: Fix invalid period calculationNamhyung Kim1-1/+1
When --time option is given with a value outside recorded time, the last sample time (tprev) was set to that value and run time calculation might be incorrect. This is a problem of the first samples for each cpus since it would skip the runtime update when tprev is 0. But with --time option it had non-zero (which is invalid) value so the calculation is also incorrect. For example, let's see the followging: $ perf sched timehist time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) --------------- ------ ------------------------------ --------- --------- --------- 3195.968367 [0003] <idle> 0.000 0.000 0.000 3195.968386 [0002] Timer[4306/4277] 0.000 0.000 0.018 3195.968397 [0002] Web Content[4277] 0.000 0.000 0.000 3195.968595 [0001] JS Helper[4302/4277] 0.000 0.000 0.000 3195.969217 [0000] <idle> 0.000 0.000 0.621 3195.969251 [0001] kworker/1:1H[291] 0.000 0.000 0.033 The sample starts at 3195.968367 but when I gave a time interval from 3194 to 3196 (in sec) it will calculate the whole 2 second as runtime. In below, 2 cpus accounted it as runtime, other 2 cpus accounted it as idle time. Before: $ perf sched timehist --time 3194,3196 -s | tail Idle stats: CPU 0 idle for 1995.991 msec CPU 1 idle for 20.793 msec CPU 2 idle for 30.191 msec CPU 3 idle for 1999.852 msec Total number of unique tasks: 23 Total number of context switches: 128 Total run time (msec): 3724.940 After: $ perf sched timehist --time 3194,3196 -s | tail Idle stats: CPU 0 idle for 10.811 msec CPU 1 idle for 20.793 msec CPU 2 idle for 30.191 msec CPU 3 idle for 18.337 msec Total number of unique tasks: 23 Total number of context switches: 128 Total run time (msec): 18.139 Committer notes: Further testing: Before: Idle stats: CPU 0 idle for 229.785 msec CPU 1 idle for 937.944 msec CPU 2 idle for 188.931 msec CPU 3 idle for 986.185 msec After: # perf sched timehist --time 40602,40603 -s | tail Idle stats: CPU 0 idle for 229.785 msec CPU 1 idle for 175.407 msec CPU 2 idle for 188.931 msec CPU 3 idle for 223.657 msec Total number of unique tasks: 68 Total number of context switches: 814 Total run time (msec): 97.688 # for cpu in `seq 0 3` ; do echo -n "CPU $cpu idle for " ; perf sched timehist --time 40602,40603 | grep "\[000${cpu}\].*\<idle\>" | tr -s ' ' | cut -d' ' -f7 | awk '{entries++ ; s+=$1} END {print s " msec (entries: " entries ")"}' ; done CPU 0 idle for 229.721 msec (entries: 123) CPU 1 idle for 175.381 msec (entries: 65) CPU 2 idle for 188.903 msec (entries: 56) CPU 3 idle for 223.61 msec (entries: 102) Difference due to the idle stats being accounted at nanoseconds precision while the <idle> entries in 'perf sched timehist' are trucated at msec.usec. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Fixes: 853b74071110 ("perf sched timehist: Add option to specify time window of interest") Link: http://lkml.kernel.org/r/20161222060350.17655-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-22perf sched timehist: Remove hardcoded 'comm_width' check at print_summaryNamhyung Kim1-3/+0
Now that the default 'comm_width' value is 30, no need to check that at print_summary, Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20161222060350.17655-1-namhyung@kernel.org [ Split from a larger patch ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-22perf sched timehist: Enlarge default 'comm_width'Namhyung Kim1-1/+1
Current default value is 20 but it's easily changed to a bigger value as task has a long name and different tid and pid. And it makes the output not aligned. So change it to have a large value as summary shows. Committer notes: Before: # perf sched record ^C # perf sched timehist <SNIP> 40602.770537 [0001] rcuos/2[29] 7.970 0.002 0.020 40602.771512 [0003] <idle> 0.003 0.000 0.986 40602.771586 [0001] <idle> 0.020 0.000 1.049 40602.771606 [0001] qemu-system-x86[3593/3510] 0.000 0.002 0.020 40602.771629 [0003] qemu-system-x86[3510] 0.000 0.003 0.116 40602.771776 [0000] <idle> 0.001 0.000 1.892 <SNIP> After: # perf sched timehist <SNIP> 40602.770537 [0001] rcuos/2[29] 7.970 0.002 0.020 40602.771512 [0003] <idle> 0.003 0.000 0.986 40602.771586 [0001] <idle> 0.020 0.000 1.049 40602.771606 [0001] qemu-system-x86[3593/3510] 0.000 0.002 0.020 40602.771629 [0003] qemu-system-x86[3510] 0.000 0.003 0.116 <SNIP> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20161222060350.17655-1-namhyung@kernel.org [ Split from a larger patch ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-22perf sched timehist: Honour 'comm_width' when aligning the headersNamhyung Kim1-3/+4
Current default value is 20, but that may change in the future, so make places where we have 20 hardcoded use 'comm_width'. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20161222060350.17655-1-namhyung@kernel.org [ Split from a larger patch ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-20tools lib bpf: Add bpf_prog_{attach,detach}Joe Stringer2-0/+26
Commit d8c5b17f2bc0 ("samples: bpf: add userspace example for attaching eBPF programs to cgroups") added these functions to samples/libbpf, but during this merge all of the samples libbpf functionality is shifting to tools/lib/bpf. Shift these functions there. Committer notes: Use bzero + attr.FIELD = value instead of 'attr = { .FIELD = value, just like the other wrapper calls to sys_bpf with bpf_attr to make this build in older toolchais, such as the ones in CentOS 5 and 6. Signed-off-by: Joe Stringer <joe@ovn.org> Cc: Alexei Starovoitov <ast@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-au2zvtsh55vqeo3v3uw7jr4c@git.kernel.org Link: https://github.com/joestringer/linux/commit/353e6f298c3d0a92fa8bfa61ff898c5050261a12.patch Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-20perf diff: Do not overwrite valid build idKan Liang1-1/+2
Fixes a perf diff regression issue which was introduced by commit 5baecbcd9c9a ("perf symbols: we can now read separate debug-info files based on a build ID") The binary name could be same when perf diff different binaries. Build id is used to distinguish between them. However, the previous patch assumes the same binary name has same build id. So it overwrites the build id according to the binary name, regardless of whether the build id is set or not. Check the has_build_id in dso__load. If the build id is already set, use it. Before the fix: $ perf diff 1.perf.data 2.perf.data # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ ....... ................ ............................. # 99.83% -99.80% tchain_edit [.] f2 0.12% +99.81% tchain_edit [.] f3 0.02% -0.01% [ixgbe] [k] ixgbe_read_reg After the fix: $ perf diff 1.perf.data 2.perf.data # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ ....... ................ ............................. # 99.83% +0.10% tchain_edit [.] f3 0.12% -0.08% tchain_edit [.] f2 Signed-off-by: Kan Liang <kan.liang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> CC: Dima Kogan <dima@secretsauce.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: 5baecbcd9c9a ("perf symbols: we can now read separate debug-info files based on a build ID") Link: http://lkml.kernel.org/r/1481642984-13593-1-git-send-email-kan.liang@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-20perf annotate: Don't throw error for zero length symbolsRavi Bangoria1-1/+2
'perf report --tui' exits with error when it finds a sample of zero length symbol (i.e. addr == sym->start == sym->end). Actually these are valid samples. Don't exit TUI and show report with such symbols. Reported-and-Tested-by: Anton Blanchard <anton@samba.org> Link: https://lkml.org/lkml/2016/10/8/189 Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Chris Riyder <chris.ryder@arm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@kernel.org # v4.9+ Link: http://lkml.kernel.org/r/1479804050-5028-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-20perf bench futex: Fix lock-pi help stringDavidlohr Bueso1-1/+1
Obvious copy/paste typo from the requeue program. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Davidlohr Bueso <dbueso@suse.de> Link: http://lkml.kernel.org/r/1481830584-30909-1-git-send-email-dave@stgolabs.net Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-20perf trace: Check if MAP_32BIT is defined (again)Jiri Olsa1-0/+2
There might be systems where MAP_32BIT is not defined, like some some RHEL7 powerpc versions. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Kyle McMartin <kyle@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Fixes: 256763b01741 ("perf trace beauty mmap: Add more conditional defines") Link: http://lkml.kernel.org/r/1481831814-23683-1-git-send-email-jolsa@kernel.org [ Changed the Fixme cset to the one removing the conditional switch case for MAP_32BIT ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-18Merge tag 'libnvdimm-for-4.10' of ↵Linus Torvalds1-7/+23
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "The libnvdimm pull request is relatively small this time around due to some development topics being deferred to 4.11. As for this pull request the bulk of it has been in -next for several releases leading to one late fix being added (commit 868f036fee4b ("libnvdimm: fix mishandled nvdimm_clear_poison() return value")). It has received a build success notification from the 0day-kbuild robot and passes the latest libnvdimm unit tests. Summary: - Dynamic label support: To date namespace label support has been limited to disambiguating cases where PMEM (direct load/store) and BLK (mmio aperture) accessed-capacity alias on the same DIMM. Since 4.9 added support for multiple namespaces per PMEM-region there is value to support namespace labels even in the non-aliasing case. The presence of a valid namespace index block force-enables label support when the kernel would otherwise rely on region boundaries, and permits the region to be sub-divided. - Handle media errors in namespace metadata: Complement the error handling for media errors in namespace data areas with support for clearing errors on writes, and downgrading potential machine-check exceptions to simple i/o errors on read. - Device-DAX region attributes: Add 'align', 'id', and 'size' as attributes for device-dax regions. In particular this enables userspace tooling to generically size memory mapping and i/o operations. Prevent userspace from growing assumptions / dependencies about the parent device topology for a dax region. A libnvdimm namespace may not always be the parent device of a dax region. - Various cleanups and small fixes" * tag 'libnvdimm-for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: dax: add region 'id', 'size', and 'align' attributes libnvdimm: fix mishandled nvdimm_clear_poison() return value libnvdimm: replace mutex_is_locked() warnings with lockdep_assert_held libnvdimm, pfn: fix align attribute libnvdimm, e820: use module_platform_driver libnvdimm, namespace: use octal for permissions libnvdimm, namespace: avoid multiple sector calculations libnvdimm: remove else after return in nsio_rw_bytes() libnvdimm, namespace: fix the type of name variable libnvdimm: use consistent naming for request_mem_region() nvdimm: use the right length of "pmem" libnvdimm: check and clear poison before writing to pmem tools/testing/nvdimm: dynamic label support libnvdimm: allow a platform to force enable label support libnvdimm: use generic iostat interfaces
2016-12-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-1/+29
Pull networking fixes and cleanups from David Miller: 1) Revert bogus nla_ok() change, from Alexey Dobriyan. 2) Various bpf validator fixes from Daniel Borkmann. 3) Add some necessary SET_NETDEV_DEV() calls to hsis_femac and hip04 drivers, from Dongpo Li. 4) Several ethtool ksettings conversions from Philippe Reynes. 5) Fix bugs in inet port management wrt. soreuseport, from Tom Herbert. 6) XDP support for virtio_net, from John Fastabend. 7) Fix NAT handling within a vrf, from David Ahern. 8) Endianness fixes in dpaa_eth driver, from Claudiu Manoil * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (63 commits) net: mv643xx_eth: fix build failure isdn: Constify some function parameters mlxsw: spectrum: Mark split ports as such cgroup: Fix CGROUP_BPF config qed: fix old-style function definition net: ipv6: check route protocol when deleting routes r6040: move spinlock in r6040_close as SOFTIRQ-unsafe lock order detected irda: w83977af_ir: cleanup an indent issue net: sfc: use new api ethtool_{get|set}_link_ksettings net: davicom: dm9000: use new api ethtool_{get|set}_link_ksettings net: cirrus: ep93xx: use new api ethtool_{get|set}_link_ksettings net: chelsio: cxgb3: use new api ethtool_{get|set}_link_ksettings net: chelsio: cxgb2: use new api ethtool_{get|set}_link_ksettings bpf: fix mark_reg_unknown_value for spilled regs on map value marking bpf: fix overflow in prog accounting bpf: dynamically allocate digest scratch buffer gtp: Fix initialization of Flags octet in GTPv1 header gtp: gtp_check_src_ms_ipv4() always return success net/x25: use designated initializers isdn: use designated initializers ...
2016-12-17Merge branch 'kbuild' of ↵Linus Torvalds12-16/+12
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild updates from Michal Marek: - prototypes for x86 asm-exported symbols (Adam Borowski) and a warning about missing CRCs (Nick Piggin) - asm-exports fix for LTO (Nicolas Pitre) - thin archives improvements (Nick Piggin) - linker script fix for CONFIG_LD_DEAD_CODE_DATA_ELIMINATION (Nick Piggin) - genksyms support for __builtin_va_list keyword - misc minor fixes * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: x86/kbuild: enable modversions for symbols exported from asm kbuild: fix scripts/adjust_autoksyms.sh* for the no modules case scripts/kallsyms: remove last remnants of --page-offset option make use of make variable CURDIR instead of calling pwd kbuild: cmd_export_list: tighten the sed script kbuild: minor improvement for thin archives build kbuild: modpost warn if export version crc is missing kbuild: keep data tables through dead code elimination kbuild: improve linker compatibility with lib-ksyms.o build genksyms: Regenerate parser kbuild/genksyms: handle va_list type kbuild: thin archives for multi-y targets kbuild: kallsyms allow 3-pass generation if symbols size has changed
2016-12-17Merge branch 'for-4.10/libnvdimm' into libnvdimm-for-nextDan Williams1-7/+23
2016-12-17bpf, test_verifier: fix a test case error result on unprivilegedDaniel Borkmann1-1/+1
Running ./test_verifier as unprivileged lets 1 out of 98 tests fail: [...] #71 unpriv: check that printk is disallowed FAIL Unexpected error message! 0: (7a) *(u64 *)(r10 -8) = 0 1: (bf) r1 = r10 2: (07) r1 += -8 3: (b7) r2 = 8 4: (bf) r3 = r1 5: (85) call bpf_trace_printk#6 unknown func bpf_trace_printk#6 [...] The test case is correct, just that the error outcome changed with ebb676daa1a3 ("bpf: Print function name in addition to function id"). Same as with e00c7b216f34 ("bpf: fix multiple issues in selftest suite and samples") issue 2), so just fix up the function name. Fixes: ebb676daa1a3 ("bpf: Print function name in addition to function id") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-17bpf: fix regression on verifier pruning wrt map lookupsDaniel Borkmann1-0/+28
Commit 57a09bf0a416 ("bpf: Detect identical PTR_TO_MAP_VALUE_OR_NULL registers") introduced a regression where existing programs stopped loading due to reaching the verifier's maximum complexity limit, whereas prior to this commit they were loading just fine; the affected program has roughly 2k instructions. What was found is that state pruning couldn't be performed effectively anymore due to mismatches of the verifier's register state, in particular in the id tracking. It doesn't mean that 57a09bf0a416 is incorrect per se, but rather that verifier needs to perform a lot more work for the same program with regards to involved map lookups. Since commit 57a09bf0a416 is only about tracking registers with type PTR_TO_MAP_VALUE_OR_NULL, the id is only needed to follow registers until they are promoted through pattern matching with a NULL check to either PTR_TO_MAP_VALUE or UNKNOWN_VALUE type. After that point, the id becomes irrelevant for the transitioned types. For UNKNOWN_VALUE, id is already reset to 0 via mark_reg_unknown_value(), but not so for PTR_TO_MAP_VALUE where id is becoming stale. It's even transferred further into other types that don't make use of it. Among others, one example is where UNKNOWN_VALUE is set on function call return with RET_INTEGER return type. states_equal() will then fall through the memcmp() on register state; note that the second memcmp() uses offsetofend(), so the id is part of that since d2a4dd37f6b4 ("bpf: fix state equivalence"). But the bisect pointed already to 57a09bf0a416, where we really reach beyond complexity limit. What I found was that states_equal() often failed in this case due to id mismatches in spilled regs with registers in type PTR_TO_MAP_VALUE. Unlike non-spilled regs, spilled regs just perform a memcmp() on their reg state and don't have any other optimizations in place, therefore also id was relevant in this case for making a pruning decision. We can safely reset id to 0 as well when converting to PTR_TO_MAP_VALUE. For the affected program, it resulted in a ~17 fold reduction of complexity and let the program load fine again. Selftest suite also runs fine. The only other place where env->id_gen is used currently is through direct packet access, but for these cases id is long living, thus a different scenario. Also, the current logic in mark_map_regs() is not fully correct when marking NULL branch with UNKNOWN_VALUE. We need to cache the destination reg's id in any case. Otherwise, once we marked that reg as UNKNOWN_VALUE, it's id is reset and any subsequent registers that hold the original id and are of type PTR_TO_MAP_VALUE_OR_NULL won't be marked UNKNOWN_VALUE anymore, since mark_map_reg() reuses the uncached regs[regno].id that was just overridden. Note, we don't need to cache it outside of mark_map_regs(), since it's called once on this_branch and the other time on other_branch, which are both two independent verifier states. A test case for this is added here, too. Fixes: 57a09bf0a416 ("bpf: Detect identical PTR_TO_MAP_VALUE_OR_NULL registers") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-16Merge tag 'powerpc-4.10-1' of ↵Linus Torvalds53-337/+3307
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Highlights include: - Support for the kexec_file_load() syscall, which is a prereq for secure and trusted boot. - Prevent kernel execution of userspace on P9 Radix (similar to SMEP/PXN). - Sort the exception tables at build time, to save time at boot, and store them as relative offsets to save space in the kernel image & memory. - Allow building the kernel with thin archives, which should allow us to build an allyesconfig once some other fixes land. - Build fixes to allow us to correctly rebuild when changing the kernel endian from big to little or vice versa. - Plumbing so that we can avoid doing a full mm TLB flush on P9 Radix. - Initial stack protector support (-fstack-protector). - Support for dumping the radix (aka. Linux) and hash page tables via debugfs. - Fix an oops in cxl coredump generation when cxl_get_fd() is used. - Freescale updates from Scott: "Highlights include 8xx hugepage support, qbman fixes/cleanup, device tree updates, and some misc cleanup." - Many and varied fixes and minor enhancements as always. Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Anshuman Khandual, Anton Blanchard, Balbir Singh, Bartlomiej Zolnierkiewicz, Christophe Jaillet, Christophe Leroy, Denis Kirjanov, Elimar Riesebieter, Frederic Barrat, Gautham R. Shenoy, Geliang Tang, Geoff Levand, Jack Miller, Johan Hovold, Lars-Peter Clausen, Libin, Madhavan Srinivasan, Michael Neuling, Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Pan Xinhui, Peter Senna Tschudin, Rashmica Gupta, Rui Teng, Russell Currey, Scott Wood, Simon Guo, Suraj Jitindar Singh, Thiago Jung Bauermann, Tobias Klauser, Vaibhav Jain" [ And thanks to Michael, who took time off from a new baby to get this pull request done. - Linus ] * tag 'powerpc-4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (174 commits) powerpc/fsl/dts: add FMan node for t1042d4rdb powerpc/fsl/dts: add sg_2500_aqr105_phy4 alias on t1024rdb powerpc/fsl/dts: add QMan and BMan nodes on t1024 powerpc/fsl/dts: add QMan and BMan nodes on t1023 soc/fsl/qman: test: use DEFINE_SPINLOCK() powerpc/fsl-lbc: use DEFINE_SPINLOCK() powerpc/8xx: Implement support of hugepages powerpc: get hugetlbpage handling more generic powerpc: port 64 bits pgtable_cache to 32 bits powerpc/boot: Request no dynamic linker for boot wrapper soc/fsl/bman: Use resource_size instead of computation soc/fsl/qe: use builtin_platform_driver powerpc/fsl_pmc: use builtin_platform_driver powerpc/83xx/suspend: use builtin_platform_driver powerpc/ftrace: Fix the comments for ftrace_modify_code powerpc/perf: macros for power9 format encoding powerpc/perf: power9 raw event format encoding powerpc/perf: update attribute_group data structure powerpc/perf: factor out the event format field powerpc/mm/iommu, vfio/spapr: Put pages on VFIO container shutdown ...
2016-12-15Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds3-9/+6
Pull virtio updates from Michael Tsirkin: "virtio, vhost: new device, fixes, speedups This includes the new virtio crypto device, and fixes all over the place. In particular enabling endian-ness checks for sparse builds found some bugs which this fixes. And it appears that everyone is in agreement that disabling endian-ness sparse checks shouldn't be necessary any longer. So this enables them for everyone, and drops the __CHECK_ENDIAN__ and __bitwise__ APIs. IRQ handling in virtio has been refactored somewhat, the larger switch to IRQ_SHARED will have to wait as it proved too aggressive" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (34 commits) Makefile: drop -D__CHECK_ENDIAN__ from cflags fs/logfs: drop __CHECK_ENDIAN__ Documentation/sparse: drop __CHECK_ENDIAN__ linux: drop __bitwise__ everywhere checkpatch: replace __bitwise__ with __bitwise Documentation/sparse: drop __bitwise__ tools: enable endian checks for all sparse builds linux/types.h: enable endian checks for all sparse builds virtio_mmio: Set dev.release() to avoid warning vhost: remove unused feature bit virtio_ring: fix description of virtqueue_get_buf vhost/scsi: Remove unused but set variable tools/virtio: use {READ,WRITE}_ONCE() in uaccess.h vringh: kill off ACCESS_ONCE() tools/virtio: fix READ_ONCE() crypto: add virtio-crypto driver vhost: cache used event for better performance vsock: lookup and setup guest_cid inside vhost_vsock_lock virtio_pci: split vp_try_to_find_vqs into INTx and MSI-X variants virtio_pci: merge vp_free_vectors into vp_del_vqs ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-09 06:26:47 +0000