summaryrefslogtreecommitdiffstats
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2019-09-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds1-11/+11
Pull networking fixes from David Miller: 1) Fix some length checks during OGM processing in batman-adv, from Sven Eckelmann. 2) Fix regression that caused netfilter conntrack sysctls to not be per-netns any more. From Florian Westphal. 3) Use after free in netpoll, from Feng Sun. 4) Guard destruction of pfifo_fast per-cpu qdisc stats with qdisc_is_percpu_stats(), from Davide Caratti. Similar bug is fixed in pfifo_fast_enqueue(). 5) Fix memory leak in mld_del_delrec(), from Eric Dumazet. 6) Handle neigh events on internal ports correctly in nfp, from John Hurley. 7) Clear SKB timestamp in NF flow table code so that it does not confuse fq scheduler. From Florian Westphal. 8) taprio destroy can crash if it is invoked in a failure path of taprio_init(), because the list head isn't setup properly yet and the list del is unconditional. Perform the list add earlier to address this. From Vladimir Oltean. 9) Make sure to reapply vlan filters on device up, in aquantia driver. From Dmitry Bogdanov. 10) sgiseeq driver releases DMA memory using free_page() instead of dma_free_attrs(). From Christophe JAILLET. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits) net: seeq: Fix the function used to release some memory in an error handling path enetc: Add missing call to 'pci_free_irq_vectors()' in probe and remove functions net: bcmgenet: use ethtool_op_get_ts_info() tc-testing: don't hardcode 'ip' in nsPlugin.py net: dsa: microchip: add KSZ8563 compatibility string dt-bindings: net: dsa: document additional Microchip KSZ8563 switch net: aquantia: fix out of memory condition on rx side net: aquantia: linkstate irq should be oneshot net: aquantia: reapply vlan filters on up net: aquantia: fix limit of vlan filters net: aquantia: fix removal of vlan 0 net/sched: cbs: Set default link speed to 10 Mbps in cbs_set_port_rate taprio: Set default link speed to 10 Mbps in taprio_set_picos_per_byte taprio: Fix kernel panic in taprio_destroy net: dsa: microchip: fill regmap_config name rxrpc: Fix lack of conn cleanup when local endpoint is cleaned up [ver #2] net: stmmac: dwmac-rk: Don't fail if phy regulator is absent amd-xgbe: Fix error path in xgbe_mod_init() netfilter: nft_meta_bridge: Fix get NFT_META_BRI_IIFVPROTO in network byteorder mac80211: Correctly set noencrypt for PAE frames ...
2019-09-01Merge branch 'turbostat' of ↵Linus Torvalds5-47/+90
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull turbostat updates from Len Brown: "User-space turbostat (and x86_energy_perf_policy) patches. They are primarily bug fixes from users" * 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: update version number tools/power turbostat: Add support for Hygon Fam 18h (Dhyana) RAPL tools/power turbostat: Fix caller parameter of get_tdp_amd() tools/power turbostat: Fix CPU%C1 display value tools/power turbostat: do not enforce 1ms tools/power turbostat: read from pipes too tools/power turbostat: Add Ice Lake NNPI support tools/power turbostat: rename has_hsw_msrs() tools/power turbostat: Fix Haswell Core systems tools/power turbostat: add Jacobsville support tools/power turbostat: fix buffer overrun tools/power turbostat: fix file descriptor leaks tools/power turbostat: fix leak of file descriptor on error return path tools/power turbostat: Make interval calculation per thread to reduce jitter tools/power turbostat: remove duplicate pc10 column tools/power x86_energy_perf_policy: Fix argument parsing tools/power: Fix typo in man page tools/power/x86: Enable compiler optimisations and Fortify by default tools/power x86_energy_perf_policy: Fix "uninitialized variable" warnings at -O2
2019-08-31tc-testing: don't hardcode 'ip' in nsPlugin.pyDavide Caratti1-11/+11
the following tdc test fails on Fedora: # ./tdc.py -e 2638 -- ns/SubPlugin.__init__ Test 2638: Add matchall and try to get it -----> prepare stage *** Could not execute: "$TC qdisc add dev $DEV1 clsact" -----> prepare stage *** Error message: "/bin/sh: ip: command not found" returncode 127; expected [0] -----> prepare stage *** Aborting test run. Let nsPlugin.py use the 'IP' variable introduced with commit 92c1a19e2fb9 ("tc-tests: added path to ip command in tdc"), so that the path to 'ip' is correctly resolved to the value we have in tdc_config.py. # ./tdc.py -e 2638 -- ns/SubPlugin.__init__ Test 2638: Add matchall and try to get it All test results: 1..1 ok 1 2638 - Add matchall and try to get it Fixes: 489ce2f42514 ("tc-testing: Restore original behaviour for namespaces in tdc") Reported-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31tools/power turbostat: update version numberLen Brown1-1/+1
Today is 19.08.31, at least in some parts of the world. Signed-off-by: Len Brown <len.brown@intel.com>
2019-08-31tools/power turbostat: Add support for Hygon Fam 18h (Dhyana) RAPLPu Wen1-2/+7
Commit 9392bd98bba760be96ee ("tools/power turbostat: Add support for AMD Fam 17h (Zen) RAPL") and the commit 3316f99a9f1b68c578c5 ("tools/power turbostat: Also read package power on AMD F17h (Zen)") add AMD Fam 17h RAPL support. Hygon Family 18h(Dhyana) support RAPL in bit 14 of CPUID 0x80000007 EDX, and has MSRs RAPL_PWR_UNIT/CORE_ENERGY_STAT/PKG_ENERGY_STAT. So add Hygon Dhyana Family 18h support for RAPL. Already tested on Hygon multi-node systems and it shows correct per-core energy usage and the total package power. Signed-off-by: Pu Wen <puwen@hygon.cn> Reviewed-by: Calvin Walton <calvin.walton@kepstin.ca> Signed-off-by: Len Brown <len.brown@intel.com>
2019-08-31tools/power turbostat: Fix caller parameter of get_tdp_amd()Pu Wen1-1/+1
Commit 9392bd98bba760be96ee ("tools/power turbostat: Add support for AMD Fam 17h (Zen) RAPL") add a function get_tdp_amd(), the parameter is CPU family. But the rapl_probe_amd() function use wrong model parameter. Fix the wrong caller parameter of get_tdp_amd() to use family. Cc: <stable@vger.kernel.org> # v5.1+ Signed-off-by: Pu Wen <puwen@hygon.cn> Reviewed-by: Calvin Walton <calvin.walton@kepstin.ca> Signed-off-by: Len Brown <len.brown@intel.com>
2019-08-31tools/power turbostat: Fix CPU%C1 display valueSrinivas Pandruvada1-6/+17
In some case C1% will be wrong value, when platform doesn't have MSR for C1 residency. For example: Core CPU CPU%c1 - - 100.00 0 0 100.00 0 2 100.00 1 1 100.00 1 3 100.00 But adding Busy% will fix this Core CPU Busy% CPU%c1 - - 99.77 0.23 0 0 99.77 0.23 0 2 99.77 0.23 1 1 99.77 0.23 1 3 99.77 0.23 This issue can be reproduced on most of the recent systems including Broadwell, Skylake and later. This is because if we don't select Busy% or Avg_MHz or Bzy_MHz then mperf value will not be read from MSR, so it will be 0. But this is required for C1% calculation when MSR for C1 residency is not present. Same is true for C3, C6 and C7 column selection. So add another define DO_BIC_READ(), which doesn't depend on user column selection and use for mperf, C3, C6 and C7 related counters. So when there is no platform support for C1 residency counters, we still read these counters, if the CPU has support and user selected display of CPU%c1. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2019-08-31tools/power turbostat: do not enforce 1msArtem Bityutskiy1-5/+0
Turbostat works by taking a snapshot of counters, sleeping, taking another snapshot, calculating deltas, and printing out the table. The sleep time is controlled via -i option or by user sending a signal or a character to stdin. In the latter case, turbostat always adds 1 ms sleep before it reads the counters, in order to avoid larger imprecisions in the results in prints. While the 1 ms delay may be a good idea for a "dumb" user, it is a problem for an "aware" user. I do thousands and thousands of measurements over a short period of time (like 2ms), and turbostat unconditionally adds a 1ms to my interval, so I cannot get what I really need. This patch removes the unconditional 1ms sleep. This is an expert user tool, after all, and non-experts will unlikely ever use it in the non-fixed interval mode anyway, so I think it is OK to remove the 1ms delay. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2019-08-31tools/power turbostat: read from pipes tooArtem Bityutskiy1-4/+16
Commit '47936f944e78 tools/power turbostat: fix printing on input' make a valid fix, but it completely disabled piped stdin support, which is a valuable use-case. Indeed, if stdin is a pipe, turbostat won't read anything from it, so it becomes impossible to get turbostat output at user-defined moments, instead of the regular intervals. There is no reason why this should works for terminals, but not for pipes. This patch improves the situation. Instead of ignoring pipes, we read data from them but gracefully handle the EOF case. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2019-08-31tools/power turbostat: Add Ice Lake NNPI supportRajneesh Bhardwaj1-0/+1
This enables turbostat utility on Ice Lake NNPI SoC. Link: https://lkml.org/lkml/2019/6/5/1034 Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2019-08-31tools/power turbostat: rename has_hsw_msrs()Len Brown1-4/+4
Perhaps if this more descriptive name had been used, then we wouldn't have had the HSW ULT vs HSW CORE bug, fixed by the previous commit. Signed-off-by: Len Brown <len.brown@intel.com>
2019-08-31tools/power turbostat: Fix Haswell Core systemsLen Brown1-4/+6
turbostat: cpu0: msr offset 0x630 read failed: Input/output error because Haswell Core does not have C8-C10. Output C8-C10 only on Haswell ULT. Fixes: f5a4c76ad7de ("tools/power turbostat: consolidate duplicate model numbers") Reported-by: Prarit Bhargava <prarit@redhat.com> Suggested-by: Kosuke Tatsukawa <tatsu@ab.jp.nec.com> Signed-off-by: Len Brown <len.brown@intel.com>
2019-08-31tools/power turbostat: add Jacobsville supportZhang Rui1-0/+3
Jacobsville behaves like Denverton. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2019-08-31tools/power turbostat: fix buffer overrunNaoya Horiguchi1-1/+1
turbostat could be terminated by general protection fault on some latest hardwares which (for example) support 9 levels of C-states and show 18 "tADDED" lines. That bloats the total output and finally causes buffer overrun. So let's extend the buffer to avoid this. Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Len Brown <len.brown@intel.com>
2019-08-31tools/power turbostat: fix file descriptor leaksGustavo A. R. Silva1-0/+1
Fix file descriptor leaks by closing fp before return. Addresses-Coverity-ID: 1444591 ("Resource leak") Addresses-Coverity-ID: 1444592 ("Resource leak") Fixes: 5ea7647b333f ("tools/power turbostat: Warn on bad ACPI LPIT data") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
2019-08-31tools/power turbostat: fix leak of file descriptor on error return pathColin Ian King1-0/+1
Currently the error return path does not close the file fp and leaks a file descriptor. Fix this by closing the file. Fixes: 5ea7647b333f ("tools/power turbostat: Warn on bad ACPI LPIT data") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Len Brown <len.brown@intel.com>
2019-08-31tools/power turbostat: Make interval calculation per thread to reduce jitterYazen Ghannam1-3/+10
Turbostat currently normalizes TSC and other values by dividing by an interval. This interval is the delta between the start of one global (all counters on all CPUs) sampling and the start of another. However, this introduces a lot of jitter into the data. In order to reduce jitter, the interval calculation should be based on timestamps taken per thread and close to the start of the thread's sampling. Define a per thread time value to hold the delta between samples taken on the thread. Use the timestamp taken at the beginning of sampling to calculate the delta. Move the thread's beginning timestamp to after the CPU migration to avoid jitter due to the migration. Use the global time delta for the average time delta. Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Len Brown <len.brown@intel.com>
2019-08-31tools/power turbostat: remove duplicate pc10 columnLen Brown1-1/+0
Remove the duplicate pc10 column. Fixes: be0e54c4ebbf ("turbostat: Build-in "Low Power Idle" counters support") Reported-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Len Brown <len.brown@intel.com>
2019-08-31tools/power x86_energy_perf_policy: Fix argument parsingZephaniah E. Loss-Cutler-Hull1-1/+1
The -w argument in x86_energy_perf_policy currently triggers an unconditional segfault. This is because the argument string reads: "+a:c:dD:E:e:f:m:M:rt:u:vw" and yet the argument handler expects an argument. When parse_optarg_string is called with a null argument, we then proceed to crash in strncmp, not horribly friendly. The man page describes -w as taking an argument, the long form (--hwp-window) is correctly marked as taking a required argument, and the code expects it. As such, this patch simply marks the short form (-w) as requiring an argument. Signed-off-by: Zephaniah E. Loss-Cutler-Hull <zephaniah@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2019-08-31tools/power: Fix typo in man pageMatt Lupfer1-1/+1
From context, we mean EPB (Enegry Performance Bias). Signed-off-by: Matt Lupfer <mlupfer@ddn.com> Signed-off-by: Len Brown <len.brown@intel.com>
2019-08-31tools/power/x86: Enable compiler optimisations and Fortify by defaultBen Hutchings2-2/+4
Compiling without optimisations is silly, especially since some warnings depend on the optimiser. Use -O2. Fortify adds warnings for unchecked I/O (among other things), which seems to be a good idea for user-space code. Enable that too. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Len Brown <len.brown@intel.com>
2019-08-31tools/power x86_energy_perf_policy: Fix "uninitialized variable" warnings at -O2Ben Hutchings1-11/+15
x86_energy_perf_policy first uses __get_cpuid() to check the maximum CPUID level and exits if it is too low. It then assumes that later calls will succeed (which I think is architecturally guaranteed). It also assumes that CPUID works at all (which is not guaranteed on x86_32). If optimisations are enabled, gcc warns about potentially uninitialized variables. Fix this by adding an exit-on-error after every call to __get_cpuid() instead of just checking the maximum level. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Len Brown <len.brown@intel.com>
2019-08-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds6-7/+24
Pull networking fixes from David Miller: 1) Use 32-bit index for tails calls in s390 bpf JIT, from Ilya Leoshkevich. 2) Fix missed EPOLLOUT events in TCP, from Eric Dumazet. Same fix for SMC from Jason Baron. 3) ipv6_mc_may_pull() should return 0 for malformed packets, not -EINVAL. From Stefano Brivio. 4) Don't forget to unpin umem xdp pages in error path of xdp_umem_reg(). From Ivan Khoronzhuk. 5) Fix sta object leak in mac80211, from Johannes Berg. 6) Fix regression by not configuring PHYLINK on CPU port of bcm_sf2 switches. From Florian Fainelli. 7) Revert DMA sync removal from r8169 which was causing regressions on some MIPS Loongson platforms. From Heiner Kallweit. 8) Use after free in flow dissector, from Jakub Sitnicki. 9) Fix NULL derefs of net devices during ICMP processing across collect_md tunnels, from Hangbin Liu. 10) proto_register() memory leaks, from Zhang Lin. 11) Set NLM_F_MULTI flag in multipart netlink messages consistently, from John Fastabend. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (66 commits) r8152: Set memory to all 0xFFs on failed reg reads openvswitch: Fix conntrack cache with timeout ipv4: mpls: fix mpls_xmit for iptunnel nexthop: Fix nexthop_num_path for blackhole nexthops net: rds: add service level support in rds-info net: route dump netlink NLM_F_MULTI flag missing s390/qeth: reject oversized SNMP requests sock: fix potential memory leak in proto_register() MAINTAINERS: Add phylink keyword to SFF/SFP/SFP+ MODULE SUPPORT xfrm/xfrm_policy: fix dst dev null pointer dereference in collect_md mode ipv4/icmp: fix rt dst dev null pointer dereference openvswitch: Fix log message in ovs conntrack bpf: allow narrow loads of some sk_reuseport_md fields with offset > 0 bpf: fix use after free in prog symbol exposure bpf: fix precision tracking in presence of bpf2bpf calls flow_dissector: Fix potential use-after-free on BPF_PROG_DETACH Revert "r8169: remove not needed call to dma_sync_single_for_device" ipv6: propagate ipv6_add_dev's error returns out of ipv6_find_idev net/ncsi: Fix the payload copying for the request coming from Netlink qed: Add cleanup in qed_slowpath_start() ...
2019-08-24Merge tag 'hyperv-fixes-signed' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull Hyper-V fixes from Sasha Levin: - Fix for panics and network failures on PAE guests by Dexuan Cui. - Fix of a memory leak (and related cleanups) in the hyper-v keyboard driver by Dexuan Cui. - Code cleanups for hyper-v clocksource driver during the merge window by Dexuan Cui. - Fix for a false positive warning in the userspace hyper-v KVP store by Vitaly Kuznetsov. * tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: Drivers: hv: vmbus: Fix virt_to_hvpfn() for X86_PAE Tools: hv: kvp: eliminate 'may be used uninitialized' warning Input: hyperv-keyboard: Use in-place iterator API in the channel callback Drivers: hv: vmbus: Remove the unused "tsc_page" from struct hv_context
2019-08-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller6-7/+24
Daniel Borkmann says: ==================== pull-request: bpf 2019-08-24 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix verifier precision tracking with BPF-to-BPF calls, from Alexei. 2) Fix a use-after-free in prog symbol exposure, from Daniel. 3) Several s390x JIT fixes plus BE related fixes in BPF kselftests, from Ilya. 4) Fix memory leak by unpinning XDP umem pages in error path, from Ivan. 5) Fix a potential use-after-free on flow dissector detach, from Jakub. 6) Fix bpftool to close prog fd after showing metadata, from Quentin. 7) BPF kselftest config and TEST_PROGS_EXTENDED fixes, from Anders. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-21Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds7-46/+53
Pull KVM fixes from Paolo Bonzini: "A couple bugfixes, and mostly selftests changes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: selftests/kvm: make platform_info_test pass on AMD Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot" selftests: kvm: fix state save/load on processors without XSAVE selftests: kvm: fix vmx_set_nested_state_test selftests: kvm: provide common function to enable eVMCS selftests: kvm: do not try running the VM in vmx_set_nested_state_test KVM: x86: svm: remove redundant assignment of var new_entry MAINTAINERS: add KVM x86 reviewers MAINTAINERS: change list for KVM/s390 kvm: x86: skip populating logical dest map if apic is not sw enabled
2019-08-21selftests/kvm: make platform_info_test pass on AMDVitaly Kuznetsov1-1/+1
test_msr_platform_info_disabled() generates EXIT_SHUTDOWN but VMCB state is undefined after that so an attempt to launch this guest again from test_msr_platform_info_enabled() fails. Reorder the tests to make test pass. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-21selftests/bpf: install files test_xdp_vlan.shAnders Roxell1-1/+2
When ./test_xdp_vlan_mode_generic.sh runs it complains that it can't find file test_xdp_vlan.sh. # selftests: bpf: test_xdp_vlan_mode_generic.sh # ./test_xdp_vlan_mode_generic.sh: line 9: ./test_xdp_vlan.sh: No such file or directory Rework so that test_xdp_vlan.sh gets installed, added to the variable TEST_PROGS_EXTENDED. Fixes: d35661fcf95d ("selftests/bpf: add wrapper scripts for test_xdp_vlan.sh") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Acked-by: Jesper Dangaard Brouer <jbrouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-21selftests/bpf: add config fragment BPF_JITAnders Roxell1-0/+1
When running test_kmod.sh the following shows up # sysctl cannot stat /proc/sys/net/core/bpf_jit_enable No such file or directory cannot: stat_/proc/sys/net/core/bpf_jit_enable # # sysctl cannot stat /proc/sys/net/core/bpf_jit_harden No such file or directory cannot: stat_/proc/sys/net/core/bpf_jit_harden # Rework to enable CONFIG_BPF_JIT to solve "No such file or directory" Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-21selftests/bpf: fix test_btf_dump with O=Ilya Leoshkevich2-0/+10
test_btf_dump fails when run with O=, because it needs to access source files and assumes they live in ./progs/, which is not the case in this scenario. Fix by instructing kselftest to copy btf_dump_test_case_*.c files to the test directory. Since kselftest does not preserve directory structure, adjust the test to look in ./progs/ and then in ./. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-21selftests/bpf: fix test_cgroup_storage on s390Ilya Leoshkevich1-3/+3
test_cgroup_storage fails on s390 with an assertion failure: packets are dropped when they shouldn't. The problem is that BPF_DW packet count is accessed as BPF_W with an offset of 0, which is not correct on big-endian machines. Since the point of this test is not to verify narrow loads/stores, simply use BPF_DW when working with packet counts. Fixes: 68cfa3ac6b8d ("selftests/bpf: add a cgroup storage test") Fixes: 919646d2a3a9 ("selftests/bpf: extend the storage test to test per-cpu cgroup storage") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-21selftests: kvm: fix state save/load on processors without XSAVEPaolo Bonzini1-6/+10
state_test and smm_test are failing on older processors that do not have xcr0. This is because on those processor KVM does provide support for KVM_GET/SET_XSAVE (to avoid having to rely on the older KVM_GET/SET_FPU) but not for KVM_GET/SET_XCRS. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-20Tools: hv: kvp: eliminate 'may be used uninitialized' warningVitaly Kuznetsov1-1/+1
When building hv_kvp_daemon GCC-8.3 complains: hv_kvp_daemon.c: In function ‘kvp_get_ip_info.constprop’: hv_kvp_daemon.c:812:30: warning: ‘ip_buffer’ may be used uninitialized in this function [-Wmaybe-uninitialized] struct hv_kvp_ipaddr_value *ip_buffer; this seems to be a false positive: we only use ip_buffer when op == KVP_OP_GET_IP_INFO and it is only unset when op == KVP_OP_ENUMERATE. Silence the warning by initializing ip_buffer to NULL. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds7-22/+155
Pull networking fixes from David Miller: 1) Fix jmp to 1st instruction in x64 JIT, from Alexei Starovoitov. 2) Severl kTLS fixes in mlx5 driver, from Tariq Toukan. 3) Fix severe performance regression due to lack of SKB coalescing of fragments during local delivery, from Guillaume Nault. 4) Error path memory leak in sch_taprio, from Ivan Khoronzhuk. 5) Fix batched events in skbedit packet action, from Roman Mashak. 6) Propagate VLAN TX offload to hw_enc_features in bond and team drivers, from Yue Haibing. 7) RXRPC local endpoint refcounting fix and read after free in rxrpc_queue_local(), from David Howells. 8) Fix endian bug in ibmveth multicast list handling, from Thomas Falcon. 9) Oops, make nlmsg_parse() wrap around the correct function, __nlmsg_parse not __nla_parse(). Fix from David Ahern. 10) Memleak in sctp_scend_reset_streams(), fro Zheng Bin. 11) Fix memory leak in cxgb4, from Wenwen Wang. 12) Yet another race in AF_PACKET, from Eric Dumazet. 13) Fix false detection of retransmit failures in tipc, from Tuong Lien. 14) Use after free in ravb_tstamp_skb, from Tho Vu. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits) ravb: Fix use-after-free ravb_tstamp_skb netfilter: nf_tables: map basechain priority to hardware priority net: sched: use major priority number as hardware priority wimax/i2400m: fix a memory leak bug net: cavium: fix driver name ibmvnic: Unmap DMA address of TX descriptor buffers after use bnxt_en: Fix to include flow direction in L2 key bnxt_en: Use correct src_fid to determine direction of the flow bnxt_en: Suppress HWRM errors for HWRM_NVM_GET_VARIABLE command bnxt_en: Fix handling FRAG_ERR when NVM_INSTALL_UPDATE cmd fails bnxt_en: Improve RX doorbell sequence. bnxt_en: Fix VNIC clearing logic for 57500 chips. net: kalmia: fix memory leaks cx82310_eth: fix a memory leak bug bnx2x: Fix VF's VLAN reconfiguration in reload. Bluetooth: Add debug setting for changing minimum encryption key size tipc: fix false detection of retransmit failures lan78xx: Fix memory leaks MAINTAINERS: r8169: Update path to the driver MAINTAINERS: PHY LIBRARY: Update files in the record ...
2019-08-17Merge tag 'hyperv-fixes-signed' of ↵Linus Torvalds5-39/+52
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull Hyper-V fixes from Sasha Levin: - A few fixes for the userspace hyper-v tools from Adrian Vladu. - A fix for the hyper-v MAINTAINERs entry from Lan Tianyu. - Fix for SPDX license identifier in the userspace tools from Nishad Kamdar. * tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: MAINTAINERS: Fix Hyperv vIOMMU driver file name tools: hv: Use the correct style for SPDX License Identifier tools: hv: fix typos in toolchain tools: hv: fix KVP and VSS daemons exit code tools: hv: fixed Python pep8/flake8 warnings for lsvmbus
2019-08-17tools: hv: fix typos in toolchainAdrian Vladu4-6/+6
Fix typos in the HyperV toolchain. Signed-off-by: Adrian Vladu <avladu@cloudbasesolutions.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Sasha Levin <sashal@kernel.org> Cc: Alessandro Pilotti <apilotti@cloudbasesolutions.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-17tools: hv: fix KVP and VSS daemons exit codeAdrian Vladu2-0/+4
HyperV KVP and VSS daemons should exit with 0 when the '--help' or '-h' flags are used. Signed-off-by: Adrian Vladu <avladu@cloudbasesolutions.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Sasha Levin <sashal@kernel.org> Cc: Alessandro Pilotti <apilotti@cloudbasesolutions.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-17tools: hv: fixed Python pep8/flake8 warnings for lsvmbusAdrian Vladu1-33/+42
Fixed pep8/flake8 python style code for lsvmbus tool. The TAB indentation was on purpose ignored (pep8 rule W191) to make sure the code is complying with the Linux code guideline. The following command doe not show any warnings now: pep8 --ignore=W191 lsvmbus flake8 --ignore=W191 lsvmbus Signed-off-by: Adrian Vladu <avladu@cloudbasesolutions.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Sasha Levin <sashal@kernel.org> Cc: Dexuan Cui <decui@microsoft.com> Cc: Alessandro Pilotti <apilotti@cloudbasesolutions.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-15tools: bpftool: close prog FD before exit on showing a single programQuentin Monnet1-1/+3
When showing metadata about a single program by invoking "bpftool prog show PROG", the file descriptor referring to the program is not closed before returning from the function. Let's close it. Fixes: 71bb428fe2c1 ("tools: bpf: add bpftool") Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-08-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller1-0/+48
Pablo Neira Ayuso says: ==================== Netfilter fixes for net This patchset contains Netfilter fixes for net: 1) Extend selftest to cover flowtable with ipsec, from Florian Westphal. 2) Fix interaction of ipsec with flowtable, also from Florian. 3) User-after-free with bound set to rule that fails to load. 4) Adjust state and timeout for flows that expire. 5) Timeout update race with flows in teardown state. 6) Ensure conntrack id hash calculation use invariants as input, from Dirk Morris. 7) Do not push flows into flowtable for TCP fin/rst packets. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-15selftests: net: tcp_fastopen_backup_key.sh: fix shellcheck issueAnders Roxell1-1/+1
When running tcp_fastopen_backup_key.sh the following issue was seen in a busybox environment. ./tcp_fastopen_backup_key.sh: line 33: [: -ne: unary operator expected Shellcheck showed the following issue. $ shellcheck tools/testing/selftests/net/tcp_fastopen_backup_key.sh In tools/testing/selftests/net/tcp_fastopen_backup_key.sh line 33: if [ $val -ne 0 ]; then ^-- SC2086: Double quote to prevent globbing and word splitting. Rework to do a string comparison instead. Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-15selftests: kvm: fix vmx_set_nested_state_testPaolo Bonzini1-3/+14
vmx_set_nested_state_test is trying to use the KVM_STATE_NESTED_EVMCS without enabling enlightened VMCS first. Correct the outcome of the test, and actually test that it succeeds after the capability is enabled. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-15selftests: kvm: provide common function to enable eVMCSPaolo Bonzini4-21/+28
There are two tests already enabling eVMCS and a third is coming. Add a function that enables the capability and tests the result. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-15selftests: kvm: do not try running the VM in vmx_set_nested_state_testPaolo Bonzini1-15/+0
This test is only covering various edge cases of the KVM_SET_NESTED_STATE ioctl. Running the VM does not really add anything. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-14selftests/bpf: fix "bind{4, 6} deny specific IP & port" on s390Ilya Leoshkevich1-2/+5
"bind4 allow specific IP & port" and "bind6 deny specific IP & port" fail on s390 because of endianness issue: the 4 IP address bytes are loaded as a word and compared with a constant, but the value of this constant should be different on big- and little- endian machines, which is not the case right now. Use __bpf_constant_ntohl to generate proper value based on machine endianness. Fixes: 1d436885b23b ("selftests/bpf: Selftest for sys_bind post-hooks.") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller3-17/+52
Daniel Borkmann says: ==================== pull-request: bpf 2019-08-11 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) x64 JIT code generation fix for backward-jumps to 1st insn, from Alexei. 2) Fix buggy multi-closing of BTF file descriptor in libbpf, from Andrii. 3) Fix libbpf_num_possible_cpus() to make it thread safe, from Takshak. 4) Fix bpftool to dump an error if pinning fails, from Jakub. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-10Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds14-16/+69
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf tooling fixes from Thomas Gleixner: "Perf tooling fixes all over the place: - Fix the selection of the main thread COMM in db-export - Fix the disassemmbly display for BPF in annotate - Fix cpumap mask setup in perf ftrace when only one CPU is present - Add the missing 'cpu_clk_unhalted.core' event - Fix CPU 0 bindings in NUMA benchmarks - Fix the module size calculations for s390 - Handle the gap between kernel end and module start on s390 correctly - Build and typo fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf pmu-events: Fix missing "cpu_clk_unhalted.core" event perf annotate: Fix s390 gap between kernel end and module start perf record: Fix module size on s390 perf tools: Fix include paths in ui directory perf tools: Fix a typo in a variable name in the Documentation Makefile perf cpumap: Fix writing to illegal memory in handling cpumap mask perf ftrace: Fix failure to set cpumask when only one cpu is present perf db-export: Fix thread__exec_comm() perf annotate: Fix printing of unaugmented disassembled instructions from BPF perf bench numa: Fix cpu0 binding
2019-08-09Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-1/+5
Pull kvm fixes from Paolo Bonzini: "Bugfixes (arm and x86) and cleanups" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: selftests: kvm: Adding config fragments KVM: selftests: Update gitignore file for latest changes kvm: remove unnecessary PageReserved check KVM: arm/arm64: vgic: Reevaluate level sensitive interrupts on enable KVM: arm: Don't write junk to CP15 registers on reset KVM: arm64: Don't write junk to sysregs on reset KVM: arm/arm64: Sync ICH_VMCR_EL2 back when about to block x86: kvm: remove useless calls to kvm_para_available KVM: no need to check return value of debugfs_create functions KVM: remove kvm_arch_has_vcpu_debugfs() KVM: Fix leak vCPU's VMCS value into other pCPU KVM: Check preempted_in_kernel for involuntary preemption KVM: LAPIC: Don't need to wakeup vCPU twice afer timer fire arm64: KVM: hyp: debug-sr: Mark expected switch fall-through KVM: arm64: Update kvm_arm_exception_class and esr_class_str for new EC KVM: arm: vgic-v3: Mark expected switch fall-through arm64: KVM: regmap: Fix unexpected switch fall-through KVM: arm/arm64: Introduce kvm_pmu_vcpu_init() to setup PMU counter index
2019-08-09bpf: sync bpf.h to tools infrastructureDaniel Borkmann1-4/+7
Pull in updates in BPF helper function description. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-09tools: bpftool: add error message on pin failureJakub Kicinski1-1/+5
No error message is currently printed if the pin syscall itself fails. It got lost in the loadall refactoring. Fixes: 77380998d91d ("bpftool: add loadall command") Reported-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>