summaryrefslogtreecommitdiffstats
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2016-05-12perf stat: Fallback to user only counters when perf_event_paranoid > 1Arnaldo Carvalho de Melo1-1/+6
After 0161028b7c8a ("perf/core: Change the default paranoia level to 2") 'perf stat' fails for users without CAP_SYS_ADMIN, so just use 'perf_evsel__fallback()' to have the same behaviour as 'perf record', i.e. set perf_event_attr.exclude_kernel to 1. Now: [acme@jouet linux]$ perf stat usleep 1 Performance counter stats for 'usleep 1': 0.352536 task-clock:u (msec) # 0.423 CPUs utilized 0 context-switches:u # 0.000 K/sec 0 cpu-migrations:u # 0.000 K/sec 49 page-faults:u # 0.139 M/sec 309,407 cycles:u # 0.878 GHz 243,791 instructions:u # 0.79 insn per cycle 49,622 branches:u # 140.757 M/sec 3,884 branch-misses:u # 7.83% of all branches 0.000834174 seconds time elapsed [acme@jouet linux]$ Reported-by: Ingo Molnar <mingo@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-b20jmx4dxt5hpaa9t2rroi0o@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-12perf evsel: Handle EACCESS + perf_event_paranoid=2 in fallback()Arnaldo Carvalho de Melo1-0/+18
Now with the default for the kernel.perf_event_paranoid sysctl being 2 [1] we need to fall back to :u, i.e. to set perf_event_attr.exclude_kernel to 1. Before: [acme@jouet linux]$ perf record usleep 1 Error: You may not have permission to collect stats. Consider tweaking /proc/sys/kernel/perf_event_paranoid, which controls use of the performance events system by unprivileged users (without CAP_SYS_ADMIN). The current value is 2: -1: Allow use of (almost) all events by all users >= 0: Disallow raw tracepoint access by users without CAP_IOC_LOCK >= 1: Disallow CPU event access by users without CAP_SYS_ADMIN >= 2: Disallow kernel profiling by users without CAP_SYS_ADMIN [acme@jouet linux]$ After: [acme@jouet linux]$ perf record usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.016 MB perf.data (7 samples) ] [acme@jouet linux]$ perf evlist cycles:u [acme@jouet linux]$ perf evlist -v cycles:u: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, exclude_kernel: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 [acme@jouet linux]$ And if the user turns on verbose mode, an explanation will appear: [acme@jouet linux]$ perf record -v usleep 1 Warning: kernel.perf_event_paranoid=2, trying to fall back to excluding kernel samples mmap size 528384B [ perf record: Woken up 1 times to write data ] Looking at the vmlinux_path (8 entries long) Using /lib/modules/4.6.0-rc7+/build/vmlinux for symbols [ perf record: Captured and wrote 0.016 MB perf.data (7 samples) ] [acme@jouet linux]$ [1] 0161028b7c8a ("perf/core: Change the default paranoia level to 2") Reported-by: Ingo Molnar <mingo@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-b20jmx4dxt5hpaa9t2rroi0o@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-12perf evsel: Improve EPERM error handling in open_strerror()Arnaldo Carvalho de Melo1-2/+3
We were showing a hardcoded default value for the kernel.perf_event_paranoid sysctl, now that it became more paranoid (1 -> 2 [1]), this would need to be updated, instead show the current value: [acme@jouet linux]$ perf record ls Error: You may not have permission to collect stats. Consider tweaking /proc/sys/kernel/perf_event_paranoid, which controls use of the performance events system by unprivileged users (without CAP_SYS_ADMIN). The current value is 2: -1: Allow use of (almost) all events by all users >= 0: Disallow raw tracepoint access by users without CAP_IOC_LOCK >= 1: Disallow CPU event access by users without CAP_SYS_ADMIN >= 2: Disallow kernel profiling by users without CAP_SYS_ADMIN [acme@jouet linux]$ [1] 0161028b7c8a ("perf/core: Change the default paranoia level to 2") Reported-by: Ingo Molnar <mingo@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-0gc4rdpg8d025r5not8s8028@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-12tools lib traceevent: Do not reassign parg after collapse_tree()Steven Rostedt1-2/+2
At the end of process_filter(), collapse_tree() was changed to update the parg parameter, but the reassignment after the call wasn't removed. What happens is that the "current_op" gets modified and freed and parg is assigned to the new allocated argument. But after the call to collapse_tree(), parg is assigned again to the just freed "current_op", and this causes the tool to crash. The current_op variable must also be assigned to NULL in case of error, otherwise it will cause it to be free()ed twice. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: stable@vger.kernel.org # 3.14+ Fixes: 42d6194d133c ("tools lib traceevent: Refactor process_filter()") Link: http://lkml.kernel.org/r/20160511150936.678c18a1@gandalf.local.home Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-12perf probe: Check if dwarf_getlocations() is availableArnaldo Carvalho de Melo6-0/+38
If not, tell the user that: config/Makefile:273: Old libdw.h, finding variables at given 'perf probe' point will not work, install elfutils-devel/libdw-dev >= 0.157 And return -ENOTSUPP in die_get_var_range(), failing features that need it, like the one pointed out above. This fixes the build on older systems, such as Ubuntu 12.04.5. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Vinson Lee <vlee@freedesktop.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-9l7luqkq4gfnx7vrklkq4obs@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-12perf dwarf: Guard !x86_64 definitions under #ifdef else clauseArnaldo Carvalho de Melo1-4/+4
To fix the build on Fedora Rawhide (gcc 6.0.0 20160311 (Red Hat 6.0.0-0.17): CC /tmp/build/perf/arch/x86/util/dwarf-regs.o arch/x86/util/dwarf-regs.c:66:36: error: 'x86_32_regoffset_table' defined but not used [-Werror=unused-const-variable=] static const struct pt_regs_offset x86_32_regoffset_table[] = { ^~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-fghuksc1u8ln82bof4lwcj0o@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-12perf tools: Use readdir() instead of deprecated readdir_r()Arnaldo Carvalho de Melo1-30/+30
The readdir() function is thread safe as long as just one thread uses a DIR, which is the case when parsing tracepoint event definitions, to avoid breaking the build with glibc-2.23.90 (upcoming 2.24), use it instead of readdir_r(). See: http://man7.org/linux/man-pages/man3/readdir.3.html "However, in modern implementations (including the glibc implementation), concurrent calls to readdir() that specify different directory streams are thread-safe. In cases where multiple threads must read from the same directory stream, using readdir() with external synchronization is still preferable to the use of the deprecated readdir_r(3) function." Noticed while building on a Fedora Rawhide docker container. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-wddn49r6bz6wq4ee3dxbl7lo@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-12perf thread_map: Use readdir() instead of deprecated readdir_r()Arnaldo Carvalho de Melo1-4/+4
The readdir() function is thread safe as long as just one thread uses a DIR, which is the case in thread_map, so, to avoid breaking the build with glibc-2.23.90 (upcoming 2.24), use it instead of readdir_r(). See: http://man7.org/linux/man-pages/man3/readdir.3.html "However, in modern implementations (including the glibc implementation), concurrent calls to readdir() that specify different directory streams are thread-safe. In cases where multiple threads must read from the same directory stream, using readdir() with external synchronization is still preferable to the use of the deprecated readdir_r(3) function." Noticed while building on a Fedora Rawhide docker container. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-del8h2a0f40z75j4r42l96l0@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-12perf script: Use readdir() instead of deprecated readdir_r()Arnaldo Carvalho de Melo1-36/+34
The readdir() function is thread safe as long as just one thread uses a DIR, which is the case in 'perf script', so, to avoid breaking the build with glibc-2.23.90 (upcoming 2.24), use it instead of readdir_r(). See: http://man7.org/linux/man-pages/man3/readdir.3.html "However, in modern implementations (including the glibc implementation), concurrent calls to readdir() that specify different directory streams are thread-safe. In cases where multiple threads must read from the same directory stream, using readdir() with external synchronization is still preferable to the use of the deprecated readdir_r(3) function." Noticed while building on a Fedora Rawhide docker container. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-mt3xz7n2hl49ni2vx7kuq74g@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-12perf tools: Use readdir() instead of deprecated readdir_r()Arnaldo Carvalho de Melo1-6/+6
The readdir() function is thread safe as long as just one thread uses a DIR, which is the case when synthesizing events for pre-existing threads by traversing /proc, so, to avoid breaking the build with glibc-2.23.90 (upcoming 2.24), use it instead of readdir_r(). See: http://man7.org/linux/man-pages/man3/readdir.3.html "However, in modern implementations (including the glibc implementation), concurrent calls to readdir() that specify different directory streams are thread-safe. In cases where multiple threads must read from the same directory stream, using readdir() with external synchronization is still preferable to the use of the deprecated readdir_r(3) function." Noticed while building on a Fedora Rawhide docker container. CC /tmp/build/perf/util/event.o util/event.c: In function '__event__synthesize_thread': util/event.c:466:2: error: 'readdir_r' is deprecated [-Werror=deprecated-declarations] while (!readdir_r(tasks, &dirent, &next) && next) { ^~~~~ In file included from /usr/include/features.h:368:0, from /usr/include/stdint.h:25, from /usr/lib/gcc/x86_64-redhat-linux/6.0.0/include/stdint.h:9, from /git/linux/tools/include/linux/types.h:6, from util/event.c:1: /usr/include/dirent.h:189:12: note: declared here Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-i1vj7nyjp2p750rirxgrfd3c@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-11perf diff: Fix duplicated output columnNamhyung Kim1-0/+3
The commit b97511c5bc94 ("perf tools: Add overhead/overhead_children keys defaults via string") moved initialization of column headers but it missed to check the sort__mode. As 'perf diff' doesn't call perf_hpp__init(), the setup_overhead() also should not be called. Before: # Baseline Delta Children Overhead Shared Object Symbol # ........ ....... ........ ........ ................... ....................... # 28.48% -28.47% 28.48% 28.48% [kernel.vmlinux ] [k] intel_idle 11.51% -11.47% 11.51% 11.51% libxul.so [.] 0x0000000001a360f7 3.49% -3.49% 3.49% 3.49% [kernel.vmlinux] [k] generic_exec_single 2.91% -2.89% 2.91% 2.91% libdbus-1.so.3.8.11 [.] 0x000000000000cdc2 2.86% -2.85% 2.86% 2.86% libxcb.so.1.1.0 [.] 0x000000000000c890 2.44% -2.39% 2.44% 2.44% [kernel.vmlinux] [k] perf_event_aux_ctx After: # Baseline Delta Shared Object Symbol # ........ ....... ................... ....................... # 28.48% -28.47% [kernel.vmlinux] [k] intel_idle 11.51% -11.47% libxul.so [.] 0x0000000001a360f7 3.49% -3.49% [kernel.vmlinux] [k] generic_exec_single 2.91% -2.89% libdbus-1.so.3.8.11 [.] 0x000000000000cdc2 2.86% -2.85% libxcb.so.1.1.0 [.] 0x000000000000c890 2.44% -2.39% [kernel.vmlinux] [k] perf_event_aux_ctx Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: <stable@vger.kernel.org> # 4.5+ Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: b97511c5bc94 ("perf tools: Add overhead/overhead_children keys defaults via string") Link: http://lkml.kernel.org/r/1462890384-12486-2-git-send-email-acme@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-05-08tools: bpf_jit_disasm: check for klogctl failureColin Ian King1-0/+3
klogctl can fail and return -ve len, so check for this and return NULL to avoid passing a (size_t)-1 to malloc. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-23Merge branches 'perf-urgent-for-linus', 'smp-urgent-for-linus' and ↵Linus Torvalds1-1/+1
'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf, cpu hotplug and timer fixes from Ingo Molnar: "perf: - A single tooling fix for a user-triggerable segfault. CPU hotplug: - Fix a CPU hotplug corner case regression, introduced by the recent hotplug rework timers: - Fix a boot hang in the ARM based Tango SoC clocksource driver" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf intel-pt: Fix segfault tracing transactions * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu/hotplug: Fix rollback during error-out in __cpu_disable() * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/tango-xtal: Fix boot hang due to incorrect test
2016-04-23Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds2-34/+101
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fixes from Ingo Molnar: "A handful of objtool fixes: two improvements to how warnings are printed plus a false positive warning fix, and build environment fix" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix Makefile to properly see if libelf is supported objtool: Detect falling through to the next function objtool: Add workaround for GCC switch jump table bug
2016-04-19Merge tag 'perf-urgent-for-mingo-20160418' of ↵Ingo Molnar1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull a perf/urgent fix from Arnaldo Carvalho de Melo: - Fix segfault tracing transactions in Intel PT (Adrian Hunter) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-18perf intel-pt: Fix segfault tracing transactionsAdrian Hunter1-1/+1
Tracing a workload that uses transactions gave a seg fault as follows: perf record -e intel_pt// workload perf report Program received signal SIGSEGV, Segmentation fault. 0x000000000054b58c in intel_pt_reset_last_branch_rb (ptq=0x1a36110) at util/intel-pt.c:929 929 ptq->last_branch_rb->nr = 0; (gdb) p ptq->last_branch_rb $1 = (struct branch_stack *) 0x0 (gdb) up 1148 intel_pt_reset_last_branch_rb(ptq); (gdb) l 1143 if (ret) 1144 pr_err("Intel Processor Trace: failed to deliver transaction event 1145 ret); 1146 1147 if (pt->synth_opts.callchain) 1148 intel_pt_reset_last_branch_rb(ptq); 1149 1150 return ret; 1151 } 1152 (gdb) p pt->synth_opts.callchain $2 = true (gdb) (gdb) bt #0 0x000000000054b58c in intel_pt_reset_last_branch_rb (ptq=0x1a36110) #1 0x000000000054c1e0 in intel_pt_synth_transaction_sample (ptq=0x1a36110) #2 0x000000000054c5b2 in intel_pt_sample (ptq=0x1a36110) Caused by checking the 'callchain' flag when it should have been the 'last_branch' flag. Fix that. Reported-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org # v4.4+ Fixes: f14445ee72c5 ("perf intel-pt: Support generating branch stack") Link: http://lkml.kernel.org/r/1460977068-11566-1-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-16objtool: Detect falling through to the next functionJosh Poimboeuf2-23/+61
There are several cases in compiled C code where a function may not return at the end, and may instead fall through to the next function. That may indicate a bug in the code, or a gcc bug, or even an objtool bug. But in each case, objtool reports an unhelpful warning, something like: drivers/scsi/qla2xxx/qla_attr.o: warning: objtool: qla2x00_get_fc_host_stats()+0x0: duplicate frame pointer save drivers/scsi/qla2xxx/qla_attr.o: warning: objtool: qla2x00_get_fc_host_stats()+0x0: frame pointer state mismatch Detect this situation and print a more useful error message: drivers/scsi/qla2xxx/qla_attr.o: warning: objtool: qla2x00_get_host_fabric_name() falls through to next function qla2x00_get_starget_node_name() Also add some information about this warning and its potential causes to the documentation. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/caa4ec6c687931db805e692d4e4bf06cd87d33e6.1460729697.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-15objtool: Add workaround for GCC switch jump table bugJosh Poimboeuf1-12/+41
GCC has a rare quirk, currently only seen in three driver functions in the kernel, and only with certain obscure non-distro configs, which can cause objtool to produce "unreachable instruction" false positive warnings. As part of an optimization, GCC makes a copy of an existing switch jump table, modifies it, and then hard-codes the jump (albeit with an indirect jump) to use a single entry in the table. The rest of the jump table and some of its jump targets remain as dead code. In such a case we can just crudely ignore all unreachable instruction warnings for the entire object file. Ideally we would just ignore them for the function, but that would require redesigning the code quite a bit. And honestly that's just not worth doing: unreachable instruction warnings are of questionable value anyway, and this is a very rare issue. kbuild reports: https://lkml.kernel.org/r/201603231906.LWcVUpxm%25fengguang.wu@intel.com https://lkml.kernel.org/r/201603271114.K9i45biy%25fengguang.wu@intel.com https://lkml.kernel.org/r/201603291058.zuJ6ben1%25fengguang.wu@intel.com GCC bug: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=70604 Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/700fa029bbb0feff34f03ffc69d666a3c3b57a61.1460663532.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-14soreuseport: test mixed v4/v6 socketsCraig Gallek3-1/+210
Test to validate the behavior of SO_REUSEPORT sockets that are created with both AF_INET and AF_INET6. See the commit prior to this for a description of this behavior. Signed-off-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-09Merge tag 'pm+acpi-4.6-rc3' of ↵Linus Torvalds1-10/+107
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI fixes from Rafael Wysocki: "Fixes for some issues discovered after recent changes and for some that have just been found lately regardless of those changes (intel_pstate, intel_idle, PM core, mailbox/pcc, turbostat) plus support for some new CPU models (intel_idle, Intel RAPL driver, turbostat) and documentation updates (intel_pstate, PM core). Specifics: - intel_pstate fixes for two issues exposed by the recent switch over from using timers and for one issue introduced during the 4.4 cycle plus new comments describing data structures used by the driver (Rafael Wysocki, Srinivas Pandruvada). - intel_idle fixes related to CPU offline/online (Richard Cochran). - intel_idle support (new CPU IDs and state definitions mostly) for Skylake-X and Kabylake processors (Len Brown). - PCC mailbox driver fix for an out-of-bounds memory access that may cause the kernel to panic() (Shanker Donthineni). - New (missing) CPU ID for one apparently overlooked Haswell model in the Intel RAPL power capping driver (Srinivas Pandruvada). - Fix for the PM core's wakeup IRQs framework to make it work after wakeup settings reconfiguration from sysfs (Grygorii Strashko). - Runtime PM documentation update to make it describe what needs to be done during device removal more precisely (Krzysztof Kozlowski). - Stale comment removal cleanup in the cpufreq-dt driver (Viresh Kumar). - turbostat utility fixes and support for Broxton, Skylake-X and Kabylake processors (Len Brown)" * tag 'pm+acpi-4.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (28 commits) PM / wakeirq: fix wakeirq setting after wakup re-configuration from sysfs tools/power turbostat: work around RC6 counter wrap tools/power turbostat: initial KBL support tools/power turbostat: initial SKX support tools/power turbostat: decode BXT TSC frequency via CPUID tools/power turbostat: initial BXT support tools/power turbostat: print IRTL MSRs tools/power turbostat: SGX state should print only if --debug intel_idle: Add KBL support intel_idle: Add SKX support intel_idle: Clean up all registered devices on exit. intel_idle: Propagate hot plug errors. intel_idle: Don't overreact to a cpuidle registration failure. intel_idle: Setup the timer broadcast only on successful driver load. intel_idle: Avoid a double free of the per-CPU data. intel_idle: Fix dangling registration on error path. intel_idle: Fix deallocation order on the driver exit path. intel_idle: Remove redundant initialization calls. intel_idle: Fix a helper function's return value. intel_idle: remove useless return from void function. ...
2016-04-08Merge branches 'pm-core', 'powercap' and 'pm-tools'Rafael J. Wysocki1-10/+107
* pm-core: PM / wakeirq: fix wakeirq setting after wakup re-configuration from sysfs PM / runtime: Document steps for device removal * powercap: powercap: intel_rapl: Add missing Haswell model * pm-tools: tools/power turbostat: work around RC6 counter wrap tools/power turbostat: initial KBL support tools/power turbostat: initial SKX support tools/power turbostat: decode BXT TSC frequency via CPUID tools/power turbostat: initial BXT support tools/power turbostat: print IRTL MSRs tools/power turbostat: SGX state should print only if --debug
2016-04-07tools/power turbostat: work around RC6 counter wrapLen Brown1-4/+15
Sometimes the rc6 sysfs counter spontaneously resets, causing turbostat prints a very large number as it tries to calcuate % = 100 * (old - new) / interval When we see (old > new), print ***.**% instead of a bogus huge number. Note that this detection is not fool-proof, as the counter could reset several times and still result in new > old. Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07tools/power turbostat: initial KBL supportLen Brown1-0/+14
KBL is similar to SKL Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07tools/power turbostat: initial SKX supportLen Brown1-1/+8
SKX has a lot in common with HSX Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07tools/power turbostat: decode BXT TSC frequency via CPUIDLen Brown1-1/+4
Hard-code BXT ART to 19200MHz, so turbostat --debug can fully enumerate TSC: CPUID(0x15): eax_crystal: 3 ebx_tsc: 186 ecx_crystal_hz: 0 TSC: 1190 MHz (19200000 Hz * 186 / 3 / 1000000) Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07tools/power turbostat: initial BXT supportLen Brown1-0/+9
Broxton has a lot in common with SKL Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07tools/power turbostat: print IRTL MSRsLen Brown1-3/+56
Some processors use the Interrupt Response Time Limit (IRTL) MSR value to describe the maximum IRQ response time latency for deep package C-states. (Though others have the register, but do not use it) Lets print it out to give insight into the cases where it is used. IRTL begain in SNB, with PC3/PC6/PC7, and HSW added PC8/PC9/PC10. Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07tools/power turbostat: SGX state should print only if --debugLen Brown1-1/+1
The CPUID.SGX bit was printed, even if --debug was used Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-04Merge tag 'linux-kselftest-4.6-rc3' of ↵Linus Torvalds1-11/+11
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "This update for Kselftest contains seccomp fixes" * tag 'linux-kselftest-4.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftest/seccomp: Fix the seccomp(2) signature selftest/seccomp: Fix the flag name SECCOMP_FILTER_FLAG_TSYNC
2016-04-03Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds9-23/+37
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Misc kernel side fixes: - fix event leak - fix AMD PMU driver bug - fix core event handling bug - fix build bug on certain randconfigs Plus misc tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/amd/ibs: Fix pmu::stop() nesting perf/core: Don't leak event in the syscall error path perf/core: Fix time tracking bug with multiplexing perf jit: genelf makes assumptions about endian perf hists: Fix determination of a callchain node's childlessness perf tools: Add missing initialization of perf_sample.cpumode in synthesized samples perf tools: Fix build break on powerpc perf/x86: Move events_sysfs_show() outside CPU_SUP_INTEL perf bench: Fix detached tarball building due to missing 'perf bench memcpy' headers perf tests: Fix tarpkg build test error output redirection
2016-03-30perf jit: genelf makes assumptions about endianAnton Blanchard1-14/+10
Commit 9b07e27f88b9 ("perf inject: Add jitdump mmap injection support") incorrectly assumed that PowerPC is big endian only. Simplify things by consolidating the define of GEN_ELF_ENDIAN and checking for __BYTE_ORDER == __BIG_ENDIAN. The PowerPC checks were also incorrect, they do not match what gcc emits. We should first look for __powerpc64__, then __powerpc__. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Carl Love <cel@us.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Fixes: 9b07e27f88b9 ("perf inject: Add jitdump mmap injection support") Link: http://lkml.kernel.org/r/20160329175944.33a211cc@kryten Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-30perf hists: Fix determination of a callchain node's childlessnessAndres Freund1-1/+1
The 4b3a3212233a ("perf hists browser: Support flat callchains") commit over-aggressively tried to optimize callchain_node__init_have_children(). That lead to --tui mode not allowing to expand call chain elements if a call chain element had only one parent. That's why --inverted callgraphs looked halfway sane, but plain ones didn't. Revert that individual optimization, it wasn't really related to the rest of the commit. Signed-off-by: Andres Freund <andres@anarazel.de> Acked-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Fixes: 4b3a3212233a ("perf hists browser: Support flat callchains") Link: http://lkml.kernel.org/r/20160330190245.GB13305@awork2.anarazel.de Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-30tools/lib/lockdep: Fix unsupported 'basename -s' in run_tests.shSedat Dilek1-4/+8
Here on Ubuntu/precise I have GNU/coreutils v8.13 installed where 'basename -s' is not supported. The result is that run_tests.sh is not done properly. How to reproduce: $ cd $BUILD_DIR $ LC_ALL=C make -C tools/ liblockdep $ cd tools/lib/lockdep/ $ LC_ALL=C ./run_tests.sh basename: invalid option -- 's' Try `basename --help' for more information. ... timeout: failed to run command `./tests/': Permission denied FAILED! rm: cannot remove `tests/': Is a directory Due to unsupported basename the tests programs are not generated and cannot be removed. Fix this by doing a compatible basename invocation and check for the existence of generated tests programs. For more details see this LKML thread: http://marc.info/?t=145906667300001&r=1&w=2 Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sasha Levin <sasha.levin@oracle.com> (maintainer:LIBLOCKDEP) Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-fsdevel <linux-fsdevel@vger.kernel.org> Link: http://lkml.kernel.org/r/1459326169-7009-1-git-send-email-sedat.dilek@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-29perf tools: Add missing initialization of perf_sample.cpumode in synthesized ↵Arnaldo Carvalho de Melo4-7/+22
samples In 473398a21d28 ("perf tools: Add cpumode to struct perf_sample"), I missed some places where perf_sample fields are directly initialized in addition to what is done in perf_evsel__parse_sample(), namely when synthesizing PERF_RECORD_{MMAP*,COMM,FORK,EXIT} for pre-existing threads and also in intel_pt and intel_bts when synthesizing events from processor trace, the jitdump code also was affected, fix it. The problem was noticed with running: # perf record -e intel_pt//u true # perf script Where the samples wouldn't get resolved because perf_sample.cpumode would be left as zero, i.e. PERF_RECORD_MISC_CPUMODE_UNKNOWN, not resolving as kernel, hypervisor or user cpu modes. Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 473398a21d28 ("perf tools: Add cpumode to struct perf_sample") Link: http://lkml.kernel.org/n/tip-n5sdauxgk24d5nun8kuuu2mh@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-29selftest/seccomp: Fix the seccomp(2) signatureMickaël Salaün1-2/+2
Signed-off-by: Mickaël Salaün <mic@digikod.net> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Kees Cook <keescook@chromium.org> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Will Drewry <wad@chromium.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2016-03-29selftest/seccomp: Fix the flag name SECCOMP_FILTER_FLAG_TSYNCMickaël Salaün1-9/+9
Rename SECCOMP_FLAG_FILTER_TSYNC to SECCOMP_FILTER_FLAG_TSYNC to match the UAPI. Signed-off-by: Mickaël Salaün <mic@digikod.net> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Kees Cook <keescook@chromium.org> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Will Drewry <wad@chromium.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2016-03-28perf tools: Fix build break on powerpcSukadev Bhattiprolu1-0/+2
Commit 531d2410635c ("perf tools: Do not include stringify.h from the kernel sources") seems to have accidentially removed the inclusion of "util/header.h" from "arch/powerpc/util/header.c". "util/header.h" provides the prototype for get_cpuid() and is needed to build perf on Powerpc: arch/powerpc/util/header.c:17:1: error: no previous prototype for 'get_cpuid' [-Werror=missing-prototypes] Reported-by: Michael Ellerman <mpe@ellerman.id.au> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 531d2410635c ("perf tools: Do not include stringify.h from the kernel sources") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> [ Included "util.h" too, to get the scnprintf() prototype ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-24Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds79-557/+385
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "This tree contains various perf fixes on the kernel side, plus three hw/event-enablement late additions: - Intel Memory Bandwidth Monitoring events and handling - the AMD Accumulated Power Mechanism reporting facility - more IOMMU events ... and a final round of perf tooling updates/fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits) perf llvm: Use strerror_r instead of the thread unsafe strerror one perf llvm: Use realpath to canonicalize paths perf tools: Unexport some methods unused outside strbuf.c perf probe: No need to use formatting strbuf method perf help: Use asprintf instead of adhoc equivalents perf tools: Remove unused perf_pathdup, xstrdup functions perf tools: Do not include stringify.h from the kernel sources tools include: Copy linux/stringify.h from the kernel tools lib traceevent: Remove redundant CPU output perf tools: Remove needless 'extern' from function prototypes perf tools: Simplify die() mechanism perf tools: Remove unused DIE_IF macro perf script: Remove lots of unused arguments perf thread: Rename perf_event__preprocess_sample_addr to thread__resolve perf machine: Rename perf_event__preprocess_sample to machine__resolve perf tools: Add cpumode to struct perf_sample perf tests: Forward the perf_sample in the dwarf unwind test perf tools: Remove misplaced __maybe_unused perf list: Fix documentation of :ppp perf bench numa: Fix assertion for nodes bitfield ...
2016-03-24Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds2-1/+136
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: - fix hotplug bugs - fix irq live lock - fix various topology handling bugs - fix APIC ACK ordering - fix PV iopl handling - fix speling - fix/tweak memcpy_mcsafe() return value - fix fbcon bug - remove stray prototypes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/msr: Remove unused native_read_tscp() x86/apic: Remove declaration of unused hw_nmi_is_cpu_stuck x86/oprofile/nmi: Add missing hotplug FROZEN handling x86/hpet: Use proper mask to modify hotplug action x86/apic/uv: Fix the hotplug notifier x86/apb/timer: Use proper mask to modify hotplug action x86/topology: Use total_cpus not nr_cpu_ids for logical packages x86/topology: Fix Intel HT disable x86/topology: Fix logical package mapping x86/irq: Cure live lock in fixup_irqs() x86/tsc: Prevent NULL pointer deref in calibrate_delay_is_known() x86/apic: Fix suspicious RCU usage in smp_trace_call_function_interrupt() x86/iopl: Fix iopl capability check on Xen PV x86/iopl/64: Properly context-switch IOPL on Xen PV selftests/x86: Add an iopl test x86/mm, x86/mce: Fix return type/value for memcpy_mcsafe() x86/video: Don't assume all FB devices are PCI devices arch/x86/irq: Purge useless handler declarations from hw_irq.h x86: Fix misspellings in comments
2016-03-24perf bench: Fix detached tarball building due to missing 'perf bench memcpy' ↵Arnaldo Carvalho de Melo1-0/+1
headers A change on kernel files included by the 'perf bench memcpy' code grew some new include deps, breaking the detached tarball build: $ make -C tools/perf build-test make: Entering directory '/home/acme/git/linux/tools/perf' - tarpkg: ./tests/perf-targz-src-pkg . tests/make:302: recipe for target 'tarpkg' failed make[1]: *** [tarpkg] Error 2 Makefile:102: recipe for target 'build-test' failed make: *** [build-test] Error 2 make: Leaving directory '/home/acme/git/linux/tools/perf' $ cat tools/perf/tarpkg ./tests/perf-targz-src-pkg . PERF_VERSION = 4.5.g05f5ec PERF_VERSION = 4.5.g05f5ec In file included from bench/mem-memcpy-x86-64-asm.S:9:0: bench/../../../arch/x86/lib/memcpy_64.S:5:29: fatal error: asm/cpufeatures.h: No such file or directory compilation terminated. mv: cannot stat ‘bench/.mem-memcpy-x86-64-asm.o.tmp’: No such file or directory make[5]: *** [bench/mem-memcpy-x86-64-asm.o] Error 1 make[5]: *** Waiting for unfinished jobs.... make[4]: *** [bench] Error 2 make[4]: *** Waiting for unfinished jobs.... make[3]: *** [perf-in.o] Error 2 make[3]: *** Waiting for unfinished jobs.... make[2]: *** [all] Error 2 $ Add arch/*/include/asm/*features.h to tools/perf/MANIFEST so that we can continue to use detached tarballs to build perf. Now it builds ok, doing it manually: $ make help | grep perf perf-tar-src-pkg - Build perf-4.5.0.tar source tarball perf-targz-src-pkg - Build perf-4.5.0.tar.gz source tarball perf-tarbz2-src-pkg - Build perf-4.5.0.tar.bz2 source tarball perf-tarxz-src-pkg - Build perf-4.5.0.tar.xz source tarball $ ls -la perf-4.5.0.tar ls: cannot access perf-4.5.0.tar: No such file or directory $ make perf-tar-src-pkg TAR PERF_VERSION = 4.5.g32c25b $ ls -la perf-4.5.0.tar -rw-rw-r--. 1 acme acme 6318080 Mar 24 11:52 perf-4.5.0.tar $ mv perf-4.5.0.tar /tmp $ cd /tmp $ tar xf perf-4.5.0.tar $ cd perf-4.5.0/tools/perf $ make > /dev/null PERF_VERSION = 4.5.g32c25b $ ls -la perf -rwxrwxr-x. 1 acme acme 14046416 Mar 24 11:53 perf $ ./perf --version perf version 4.5.g32c25b $ perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks futex: Futex stressing benchmarks all: All benchmarks $ perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() functions memset: Benchmark for memset() functions all: Run all memory access benchmarks $ perf bench mem memcpy # Running 'mem/memcpy' benchmark: # function 'default' (Default memcpy() provided by glibc) # Copying 1MB bytes ... 15.024038 GB/sec # function 'x86-64-unrolled' (unrolled memcpy() in arch/x86/lib/memcpy_64.S) # Copying 1MB bytes ... 17.438616 GB/sec # function 'x86-64-movsq' (movsq-based memcpy() in arch/x86/lib/memcpy_64.S) # Copying 1MB bytes ... 25.040064 GB/sec # function 'x86-64-movsb' (movsb-based memcpy() in arch/x86/lib/memcpy_64.S) # Copying 1MB bytes ... 25.040064 GB/sec $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-2c2sncwffuabw58fj1pw86gu@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-24perf tests: Fix tarpkg build test error output redirectionArnaldo Carvalho de Melo1-1/+1
So we need to trow away just stdout, leaving stderr to be caught by the build tests infrastructure, so that we can see what went wrong when the tarpkg build test fails: $ make -C tools/perf build-test make: Entering directory '/home/acme/git/linux/tools/perf' - tarpkg: ./tests/perf-targz-src-pkg . tests/make:302: recipe for target 'tarpkg' failed make[1]: *** [tarpkg] Error 2 Makefile:102: recipe for target 'build-test' failed make: *** [build-test] Error 2 make: Leaving directory '/home/acme/git/linux/tools/perf' $ cat tools/perf/tarpkg ./tests/perf-targz-src-pkg . PERF_VERSION = 4.5.g05f5ec PERF_VERSION = 4.5.g05f5ec In file included from bench/mem-memcpy-x86-64-asm.S:9:0: bench/../../../arch/x86/lib/memcpy_64.S:5:29: fatal error: asm/cpufeatures.h: No such file or directory compilation terminated. mv: cannot stat ‘bench/.mem-memcpy-x86-64-asm.o.tmp’: No such file or directory make[5]: *** [bench/mem-memcpy-x86-64-asm.o] Error 1 make[5]: *** Waiting for unfinished jobs.... make[4]: *** [bench] Error 2 make[4]: *** Waiting for unfinished jobs.... make[3]: *** [perf-in.o] Error 2 make[3]: *** Waiting for unfinished jobs.... make[2]: *** [all] Error 2 $ So the test flow is: 1. Run: 'make -C tools/perf build-test' 2. One of its tests failed, in this case, the 'tarpkg' one 3. Look at what went wrong, by looking at the output of that test, in tools/perf/tarpkg Admittedly, this should be shortcircuited to showing what went wrong directly from the 'make build-test' step, but lets first fix this tarpkg one and the problem it spotted, which should be fixed by adding some extra file to the tools/perf/MANIFEST so that detached tarballs continue being self contained and build successfully. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-ynld6egoxolmftcddpnd7oh6@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-24Merge tag 'perf-core-for-mingo-20160323' of ↵Ingo Molnar79-557/+385
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/core improvements and fixes: User visible fixes: - Fix documentation of :ppp modifier in 'perf list' (Andi Kleen) - Fix silly nodes bitfield bits/bytes length assertion in 'perf bench numa' (Jakub Jelen) - Remove redundant CPU output in libtraceevent (Steven Rostedt) - Remove 'core_id' check in topology 'perf test' (Sukadev Bhattiprolu) Infrastructure changes/fixes: - Record text offset in dso to calculate objdump address, to use with modules in addition to vDSO symbol address calculations (Wang Nan) - Move utilities.mak from perf to tools/scripts/ (Arnaldo Carvalho de Melo) - Add cpumode to the perf_sample struct, this way we don't need to pass the union event to the machine and thread resolving routines, shortening function signatures and allowing the future introduction of a way to use tracepoint events instead of the unavailable HW cycles counter on powerpc guests in perf kvm by just hooking on perf_evsel__parse_sample, at the end (Arnaldo Carvalho de Melo) - Remove/unexport die() related infrastructure, that at some point will finally be removed (Arnaldo Carvalho de Melo) - Adopt linux/stringify.h from the kernel sources, not to touch this kernel header from tools/ (Arnaldo Carvalho de Melo) - Stop using strbuf for things we can instead trivially use libc's asprintf() (Arnaldo Carvalho de Melo) - Ditch tools/lib/util/abspath.c, its only exported function was used at just one place and can be replaced by libc's realpath() (Arnaldo Carvalho de Melo) - Use strerror_r() in the llvm infrastructure, tread safe, its what is used elsewhere in tools/perf/ (Arnaldo Carvalho de Melo) Cleanups: - Removed misplaced or needless __maybe_unused/export (Arnaldo Carvalho de Melo) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-23perf llvm: Use strerror_r instead of the thread unsafe strerror oneArnaldo Carvalho de Melo1-3/+4
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-5njrq9dltckgm624omw9ljgu@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-23perf llvm: Use realpath to canonicalize pathsArnaldo Carvalho de Melo4-44/+12
To kill the last user of make_nonrelative_path(), that gets ditched, one more panicking function killed. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-3hu56rvyh4q5gxogovb6ko8a@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-23perf tools: Unexport some methods unused outside strbuf.cArnaldo Carvalho de Melo2-7/+9
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-nq1wvtky4mpu0nupjyar7sbw@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-23perf probe: No need to use formatting strbuf methodArnaldo Carvalho de Melo3-10/+10
We have addch() for chars, add() for fixed size data, and addstr() for variable length strings, use them. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-0ap02fn2xtvpduj2j6b2o1j4@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-23perf help: Use asprintf instead of adhoc equivalentsArnaldo Carvalho de Melo1-38/+31
That doesn't chekcs malloc return and that, when using strbuf, if it can't grow, just explodes away via die(). Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-vr8qsjbwub7e892hpa9msz95@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-23perf tools: Remove unused perf_pathdup, xstrdup functionsArnaldo Carvalho de Melo4-46/+0
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-s87zi5d03m6rz622y1z6rlsa@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-23perf tools: Do not include stringify.h from the kernel sourcesArnaldo Carvalho de Melo4-5/+3
Use instead the copy just made to tools/include/linux/. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-q736w12nwy98x5ox2hamp5ow@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-23tools include: Copy linux/stringify.h from the kernelArnaldo Carvalho de Melo1-0/+12
There is code in tools/ that is directly including this file from the kernel, and this is verboten for a while, copy it so that the next csets can fix this situation. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-e0r3nks2uai020ndghvxv5qw@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-29 03:51:50 +0000