summaryrefslogtreecommitdiffstats
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2016-12-09Merge branch 'libnvdimm-fixes' of ↵Linus Torvalds4-6/+262
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: "Several fixes to the DSM (ACPI device specific method) marshaling implementation. I consider these urgent enough to send for 4.9 consideration since they fix the kernel's handling of ARS (Address Range Scrub) commands. Especially for platforms without machine-check-recovery capabilities, successful execution of ARS commands enables the platform to potentially break out of an infinite reboot problem if a media error is present in the boot path. There is also a one line fix for a device-dax read-only mapping regression. Commits 9a901f5495e2 ("acpi, nfit: fix extended status translations for ACPI DSMs") and 325896ffdf90 ("device-dax: fix private mapping restriction, permit read-only") are true regression fixes for changes introduced this cycle. Commit efda1b5d87cb ("acpi, nfit, libnvdimm: fix / harden ars_status output length handling") fixes the kernel's handling of zero-length results, this never would have worked in the past, but we only just recently discovered a BIOS implementation that emits this arguably spec non-compliant result. The remaining two commits are additional fall out from thinking through the implications of a zero / truncated length result of the ARS Status command. In order to mitigate the risk that these changes introduce yet more regressions they are backstopped by a new unit test in commit a7de92dac9f0 ("tools/testing/nvdimm: unit test acpi_nfit_ctl()") that mocks up inputs to acpi_nfit_ctl()" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: device-dax: fix private mapping restriction, permit read-only tools/testing/nvdimm: unit test acpi_nfit_ctl() acpi, nfit: fix bus vs dimm confusion in xlat_status acpi, nfit: validate ars_status output buffer size acpi, nfit, libnvdimm: fix / harden ars_status output length handling acpi, nfit: fix extended status translations for ACPI DSMs
2016-12-09Revert "radix tree test suite: fix compilation"Linus Torvalds2-1/+29
This reverts commit 53855d10f4567a0577360b6448d52a863929775b. It shouldn't have come in yet - it depends on the changes in linux-next that will come in during the next merge window. As Matthew Wilcox says, the test suite is broken with the current state without the revert. Requested-by: Matthew Wilcox <mawilcox@microsoft.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-07radix tree test suite: fix compilationMatthew Wilcox2-29/+1
Patch "lib/radix-tree: Convert to hotplug state machine" breaks the test suite as it adds a call to cpuhp_setup_state_nocalls() which is not currently emulated in the test suite. Add it, and delete the emulation of the old CPU hotplug mechanism. Link: http://lkml.kernel.org/r/1480369871-5271-36-git-send-email-mawilcox@linuxonhyperv.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-06tools/testing/nvdimm: unit test acpi_nfit_ctl()Dan Williams4-6/+262
A recent flurry of bug discoveries in the nfit driver's DSM marshalling routine has highlighted the fact that we do not have unit test coverage for this routine. Add a self-test of acpi_nfit_ctl() routine before probing the "nfit_test.0" device. This mocks stimulus to acpi_nfit_ctl() and if any of the tests fail "nfit_test.0" will be unavailable causing the rest of the tests to not run / fail. This unit test will also be a place to land reproductions of quirky BIOS behavior discovered in the field and ensure the kernel does not regress against implementations it has seen in practice. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-12-06objtool: Fix bytes check of lea's rex_prefixJiri Slaby1-1/+1
For the "lea %(rsp), %rbp" case, we check if there is a rex_prefix. But we check 'bytes' which is insn_byte_t[4] in rex_prefix (insn_field structure). Therefore, the check is always true. Instead, check 'nbytes' which is the right one. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161205105551.25917-1-jslaby@suse.cz Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-18Merge tag 'acpi-4.9-rc6' of ↵Linus Torvalds5-34/+53
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "They fix an ACPI thermal management regression introduced by a recent FADT handling cleanup, an ACPI tools build issue introduced by a recent ACPICA commit and a PCC mailbox initialization bug causing lockdep to complain loudly. Specifics: - Revert a recent ACPICA cleanup that attempted to get rid of all FADT version 2 legacy, but broke ACPI thermal management on at least one system (Rafael Wysocki). - Fix cross-compiled builds of ACPI tools that stopped working after a recent cleanup related to the handling of header files in ACPICA (Lv Zheng). - Fix a locking issue in the PCC channel initialization code that invokes devm_request_irq() under a spinlock (among other things) and causes lockdep to complain (Hoan Tran)" * tag 'acpi-4.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: tools/power/acpi: Remove direct kernel source include reference mailbox: PCC: Fix lockdep warning when request PCC channel Revert "ACPICA: FADT support cleanup"
2016-11-16tools/power/acpi: Remove direct kernel source include referenceLv Zheng5-34/+53
Avoid breaking cross-compiled ACPI tools builds by rearranging the handling of kernel header files. This patch also contains OUTPUT/srctree cleanups in order to make above fix working for various build environments. Fixes: e323c02dee59 (ACPICA: MSVC9: Fix <sys/stat.h> inclusion order issue) Reported-and-tested-by: Yisheng Xie <xieyisheng1@huawei.com> Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-14Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds2-17/+43
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "An uncore PMU driver hardware enablement change for Intel SkyLake uncore PMUs (Skylake Y, U, H and S platforms), plus a number of tooling fixes for the histogram handling/displaying code" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/uncore: Add more Intel uncore IMC PCI IDs for SkyLake perf hists: Fix column length on --hierarchy perf hists browser: Fix column indentation on --hierarchy perf hists browser: Show folded sign properly on --hierarchy perf hists browser: Fix indentation of folded sign on --hierarchy perf hist browser: Fix hierarchy column counts
2016-11-12Merge tag 'perf-hists-hierarchy-fixes-for-mingo-20161111' of ↵Ingo Molnar2-17/+43
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes for perf {top,report} --hierarchy, from Arnaldo Carvalho de Melo: - These are fixes for the --hierarchy view of perf top and report, fixing output oddities, mostly related to scrolling. (Namhyung Kim) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-11Merge branches 'pm-tools-fixes' and 'pm-sleep-fixes'Rafael J. Wysocki1-5/+2
* pm-tools-fixes: cpupower: Correct return type of cpu_power_is_cpu_online() in cpufreq-set * pm-sleep-fixes: PM / sleep: don't suspend parent when async child suspend_{noirq, late} fails PM / sleep: fix device reference leak in test_suspend
2016-11-09perf hists: Fix column length on --hierarchyNamhyung Kim1-6/+6
Markus reported that there's a weird behavior on perf top --hierarchy regarding the column length. Looking at the code, I found a dubious code which affects the symptoms. When --hierarchy option is used, the last column length might be inaccurate since it skips to update the length on leaf entries. I cannot remember why it did and looks like a leftover from previous version during the development. Anyway, updating the column length often is not harmful. So let's move the code out. Reported-and-Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: 1a3906a7e6b9 ("perf hists: Resort hist entries with hierarchy") Link: http://lkml.kernel.org/r/20161108130833.9263-5-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-09perf hists browser: Fix column indentation on --hierarchyNamhyung Kim1-6/+13
When horizontall scrolling is used in hierarchy mode, the the right most column has unnecessary indentation. Actually it's needed only if some of left (overhead) columns were shown. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161108130833.9263-4-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-09perf hists browser: Show folded sign properly on --hierarchyNamhyung Kim1-1/+7
When horizontal scrolling is used in hierarchy mode, the folded signed disappears at the right most column. Committer note: To test it, run 'perf top --hierarchy, see the '+' symbol at the first column, then press the right arrow key, the '+' symbol will disappear, this patch fixes that. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161108130833.9263-3-namhyung@kernel.org [ Move 'width -= 2' invariant to right after the if/else ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-09perf hists browser: Fix indentation of folded sign on --hierarchyNamhyung Kim1-3/+3
It should indent 2 spaces for folded sign and a whitespace. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161108130833.9263-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-09perf hist browser: Fix hierarchy column countsNamhyung Kim1-1/+14
The perf report/top on TUI supports horizontal scrolling using LEFT and RIGHT keys. But it calculate the number of columns incorrectly when hierarchy mode is enabled so that keep pressing RIGHT key can make the output disappeared. In the hierarchy mode, all sort keys are collapsed into a single column, so it needs to be applied when calculating column numbers. Reported-and-Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161024162110.17918-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-01cpupower: Correct return type of cpu_power_is_cpu_online() in cpufreq-setLaura Abbott1-5/+2
When converting to a shared library in ac5a181d065d ("cpupower: Add cpuidle parts into library"), cpu_freq_cpu_exists() was converted to cpupower_is_cpu_online(). cpu_req_cpu_exists() returned 0 on success and -ENOSYS on failure whereas cpupower_is_cpu_online returns 1 on success. Check for the correct return value in cpufreq-set. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1374212 Fixes: ac5a181d065d (cpupower: Add cpuidle parts into library) Reported-by: Julian Seward <jseward@acm.org> Signed-off-by: Laura Abbott <labbott@redhat.com> Acked-by: Thomas Renninger <trenn@suse.com> Cc: 4.7+ <stable@vger.kernel.org> # 4.7+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-31ringtest: poll for new buffers once before updating event indexPaolo Bonzini1-2/+2
Updating the event index has a memory barrier and causes more work on the other side to actually signal the event. It is unnecessary if a new buffer has already appeared on the ring, so poll once before doing the update. The effect of this on the 0.9 ring implementation is pretty much invisible, but on the new-style ring it provides a consistent 3% performance improvement. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-31ringtest: commonize implementation of poll_avail/poll_usedPaolo Bonzini6-83/+43
Provide new primitives used_empty/avail_empty and build poll_avail/poll_used on top of it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-31ringtest: use link-time optimizationPaolo Bonzini2-4/+4
By using -flto and -fwhole-program, all functions from the ring implementation can be treated as static and possibly inlined. Force this to happen through the GCC flatten attribute. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-27objtool: Fix rare switch jump table pattern detectionJosh Poimboeuf1-1/+1
The following commit: 3732710ff6f2 ("objtool: Improve rare switch jump table pattern detection") ... improved objtool's ability to detect GCC switch statement jump tables for GCC 6. However the check to allow short jumps with the scanned range of instructions wasn't quite right. The pattern detection should allow jumps to the indirect jump instruction itself. This fixes the following warning: drivers/infiniband/sw/rxe/rxe_comp.o: warning: objtool: rxe_completer()+0x315: sibling call from callable instruction with changed frame pointer Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 3732710ff6f2 ("objtool: Improve rare switch jump table pattern detection") Link: http://lkml.kernel.org/r/20161026153408.2rifnw7bvoc5sex7@treble Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-19x86/cpufeature: Add AVX512_4VNNIW and AVX512_4FMAPS featuresPiotr Luc1-0/+2
AVX512_4VNNIW - Vector instructions for deep learning enhanced word variable precision. AVX512_4FMAPS - Vector instructions for deep learning floating-point single precision. These new instructions are to be used in future Intel Xeon & Xeon Phi processors. The bits 2&3 of CPUID[level:0x07, EDX] inform that new instructions are supported by a processor. The spec can be found in the Intel Software Developer Manual (SDM) or in the Instruction Set Extensions Programming Reference (ISE). Define new feature flags to enumerate the new instructions in /proc/cpuinfo accordingly to CPUID bits and add the required xsave extensions which are required for proper operation. Signed-off-by: Piotr Luc <piotr.luc@intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20161018150111.29926-1-piotr.luc@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-18Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds4-5/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Four tooling fixes, two kprobes KASAN related fixes and an x86 PMU driver fix/cleanup" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf jit: Fix build issue on Ubuntu perf jevents: Handle events including .c and .o perf/x86/intel: Remove an inconsistent NULL check kprobes: Unpoison stack in jprobe_return() for KASAN kprobes: Avoid false KASAN reports during stack copy perf header: Set nr_numa_nodes only when we parsed all the data perf top: Fix refreshing hierarchy entries on TUI
2016-10-18Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds2-33/+44
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc fixes from Ingo Molnar: "A CPU hotplug debuggability fix and three objtool false positive warnings fixes for new GCC6 code generation patterns" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu/hotplug: Use distinct name for cpu_hotplug.dep_map objtool: Skip all "unreachable instruction" warnings for gcov kernels objtool: Improve rare switch jump table pattern detection objtool: Support '-mtune=atom' stack frame setup instruction
2016-10-17Merge tag 'perf-urgent-for-mingo-20161017' of ↵Ingo Molnar4-5/+6
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: - Fix handling of NUMA nodes in perf.data files (Jiri Olsa) - Fix scrolling when refreshing 'perf top --tui --hierarchy' entries (Namhyung Kim) - Fix building of JIT support on Ubuntu 16.04 (Anton Blanchard) - Fix handling of events including .c and .o, that were being treated as BPF scripts instead of vendor ones (Wang Nan) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-17perf jit: Fix build issue on UbuntuAnton Blanchard1-1/+1
When building on Ubuntu 16.04, I get the following error: Makefile:49: *** the openjdk development package appears to me missing, install and try again. Stop. The problem is that update-java-alternatives has multiple spaces between fields, and cut treats each space as a new delimiter: java-1.8.0-openjdk-ppc64el 1081 /usr/lib/jvm/java-1.8.0-openjdk-ppc64el Fix this by using awk, which handles this fine. Signed-off-by: Anton Blanchard <anton@samba.org> Reviewed-by: Stephane Eranian <eranian@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1476325243-15788-1-git-send-email-anton@ozlabs.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-10-17perf jevents: Handle events including .c and .oWang Nan1-2/+2
This patch helps with Sukadev's vendor event tree where such events can happen. >From Andi Kleen: Any event including a .c/.o/.bpf currently triggers BPF compilation or loading and then an error. This can happen for some Intel vendor events, which cannot be used. This patch fixes this problem by forbidding BPF file patch containing '{', '}' and ',', make sure flex consumes the leading '{', instead of matching it using a BPF file path. Tested result: $ perf stat -e '{unc_p_clockticks,unc_p_power_state_occupancy.cores_c0}' -a -I 1000 invalid or unsupported event: '{unc_p_clockticks,unc_p_power_state_occupancy.cores_c0}' Run 'perf list' for a list of valid events (as expected, interperted as event) $ perf stat -e 'aaa.c' -a -I 1000 ERROR: problems with path aaa.c: No such file or directory (as expected, interpreted as BPF source) $ perf stat -e 'aaa.ccc' -a -I 1000 invalid or unsupported event: 'aaa.ccc' (as expected, interpreted as event) $ perf stat -e '{aaa.c}' -a -I 1000 ERROR: problems with path aaa.c: No such file or directory event syntax error: '{aaa.c}' <SKIP> (as expected, interpreted as BPF source) $ perf stat -e '{cycles,aaa.c}' -a -I 1000 ERROR: problems with path aaa.c: No such file or directory event syntax error: '{cycles,aaa.c}' (as expected, interpreted as BPF source) Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Reported-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1475900185-37967-1-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-10-16objtool: Skip all "unreachable instruction" warnings for gcov kernelsJosh Poimboeuf1-31/+26
Recently objtool has started reporting a few "unreachable instruction" warnings when CONFIG_GCOV is enabled for newer versions of GCC. Usually this warning means there's some new control flow that objtool doesn't understand. But in this case, objtool is correct and the instructions really are inaccessible. It's an annoying quirk of gcov, but it's harmless, so it's ok to just silence the warnings. With older versions of GCC, it was relatively easy to detect gcov-specific instructions and to skip any unreachable warnings produced by them. But GCC 6 has gotten craftier. Instead of continuing to play whack-a-mole with gcov, just use a bigger, more permanent hammer and disable unreachable warnings for the whole file when gcov is enabled. This is fine to do because a) unreachable warnings are usually of questionable value; and b) gcov isn't used for production kernels and we can relax the checks a bit there. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/38d5c87d61d9cd46486dd2c86f46603dff0df86f.1476393584.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-16objtool: Improve rare switch jump table pattern detectionJosh Poimboeuf1-2/+9
GCC 6 added a new switch statement jump table optimization which makes objtool's life harder. It looks like: mov [rodata addr],%reg1 ... some instructions ... jmpq *(%reg1,%reg2,8) The optimization is quite rare, but objtool still needs to be able to identify the pattern so that it can follow all possible control flow paths related to the switch statement. In order to detect the pattern, objtool starts from the indirect jump and scans backwards through the function until it finds the first instruction in the pattern. If it encounters an unconditional jump along the way, it stops and considers the pattern to be not found. As it turns out, unconditional jumps can happen, as long as they are small forward jumps within the range being scanned. This fixes the following warnings: drivers/infiniband/sw/rxe/rxe_comp.o: warning: objtool: rxe_completer()+0x2f4: sibling call from callable instruction with changed frame pointer drivers/infiniband/sw/rxe/rxe_resp.o: warning: objtool: rxe_responder()+0x10f: sibling call from callable instruction with changed frame pointer Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/8a9ed68ae1780e8d3963e4ee13f2f257fe3a3c33.1476393584.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-14Merge tag 'linux-kselftest-4.9-rc1-update' of ↵Linus Torvalds41-5/+3775
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest updates from Shuah Khan: "This update consists of: - Fixes and improvements to existing tests - Moving code from Documentation to selftests, samples, and tools: * Moves dnotify_test, prctl, ptp, vDSO, ia64, watchdog, and networking tests from Documentation to selftests. * Moves mic/mpssd, misc-devices/mei, timers, watchdog, auxdisplay, and blackfin examples from Documentation to samples. * Moves accounting, laptops/dslm, and pcmcia/crc32hash tools from Documentation to tools. * Deletes BUILD_DOCSRC and its dependencies" * tag 'linux-kselftest-4.9-rc1-update' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (21 commits) selftests/futex: Check ANSI terminal color support Doc: update 00-INDEX files to reflect the runnable code move samples: move blackfin gptimers-example from Documentation tools: move pcmcia crc32hash tool from Documentation tools: move laptops dslm tool from Documentation tools: move accounting tool from Documentation samples: move auxdisplay example code from Documentation samples: move watchdog example code from Documentation samples: move timers example code from Documentation samples: move misc-devices/mei example code from Documentation samples: move mic/mpssd example code from Documentation selftests: Move networking/timestamping from Documentation selftests: move watchdog tests from Documentation/watchdog selftests: move ia64 tests from Documentation/ia64 selftests: move vDSO tests from Documentation/vDSO selftests: move ptp tests from Documentation/ptp selftests: move prctl tests from Documentation/prctl selftests: move dnotify_test from Documentation/filesystems selftests/timers: Add missing error code assignment before test selftests/zram: replace ZRAM_LZ4_COMPRESS ...
2016-10-14Merge tag 'powerpc-4.9-2' of ↵Linus Torvalds5-0/+9
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull more powerpc updates from Michael Ellerman: "Some more powerpc updates for 4.9: Freescale updates from Scott Wood: - qbman support (a prerequisite for datapath drivers such as ethernet) - a PCI DMA fix+improvement - reset handler changes - more 8xx optimizations - some cleanups and fixes.' Fixes: - selftests/powerpc: Add missing binaries to .gitignores (Michael Ellerman) - selftests/powerpc: Fix build break caused by EXPORT_SYMBOL changes (Michael Ellerman) - powerpc/pseries: Fix stack corruption in htpe code (Laurent Dufour) - powerpc/64s: Fix power4_fixup_nap placement (Nicholas Piggin) - powerpc/64: Fix incorrect return value from __copy_tofrom_user (Paul Mackerras) - powerpc/mm/hash64: Fix might_have_hea() check (Michael Ellerman) Other: - MAINTAINERS: Remove myself from PA Semi entries (Olof Johansson) - MAINTAINERS: Drop separate pseries entry (Michael Ellerman) - MAINTAINERS: Update powerpc website & add selftests (Michael Ellerman): * tag 'powerpc-4.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (35 commits) powerpc/mm/hash64: Fix might_have_hea() check powerpc/64: Fix incorrect return value from __copy_tofrom_user powerpc/64s: Fix power4_fixup_nap placement powerpc/pseries: Fix stack corruption in htpe code selftests/powerpc: Fix build break caused by EXPORT_SYMBOL changes MAINTAINERS: Update powerpc website & add selftests MAINTAINERS: Drop separate pseries entry MAINTAINERS: Remove myself from PA Semi entries selftests/powerpc: Add missing binaries to .gitignores arch/powerpc: Add CONFIG_FSL_DPAA to corenetXX_smp_defconfig soc/qman: Add self-test for QMan driver soc/bman: Add self-test for BMan driver soc/fsl: Introduce DPAA 1.x QMan device driver soc/fsl: Introduce DPAA 1.x BMan device driver powerpc/8xx: make user addr DTLB miss the short path powerpc/8xx: Move additional DTLBMiss handlers out of exception area powerpc/8xx: use r3 to scratch CR in ITLBmiss soc/fsl/qe: fix gpio save_regs functions powerpc/8xx: add dedicated machine check handler powerpc/8xx: add system_reset_exception ...
2016-10-13perf header: Set nr_numa_nodes only when we parsed all the dataJiri Olsa1-1/+1
Sukadev reported segfault on releasing perf env's numa data. It's due to nr_numa_nodes being set no matter if the numa data gets parsed properly. The perf_env__exit crash the on releasing non existed data. Setting nr_numa_nodes only when data are parsed out properly. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Reported-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-dt9c0zgkt4hybn2cr4xiawta@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-10-13perf top: Fix refreshing hierarchy entries on TUINamhyung Kim1-1/+2
Markus reported that 'perf top --hierarchy' cannot scroll down after refresh. This was because the number of entries are not updated when hierarchy is enabled. Unlike normal report view, hierarchy mode needs to keep its own entry count since it can have non-leaf entries which can expand/collapse. Reported-and-Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Fixes: f5b763feebe9 ("perf hists browser: Count number of hierarchy entries") Link: http://lkml.kernel.org/r/20161007050412.3000-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-10-11Merge branch 'akpm' (patches from Andrew)Linus Torvalds6-3/+185
Merge more updates from Andrew Morton: - a few block updates that fell in my lap - lib/ updates - checkpatch - autofs - ipc - a ton of misc other things * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (100 commits) mm: split gfp_mask and mapping flags into separate fields fs: use mapping_set_error instead of opencoded set_bit treewide: remove redundant #include <linux/kconfig.h> hung_task: allow hung_task_panic when hung_task_warnings is 0 kthread: add kerneldoc for kthread_create() kthread: better support freezable kthread workers kthread: allow to modify delayed kthread work kthread: allow to cancel kthread work kthread: initial support for delayed kthread work kthread: detect when a kthread work is used by more workers kthread: add kthread_destroy_worker() kthread: add kthread_create_worker*() kthread: allow to call __kthread_create_on_node() with va_list args kthread/smpboot: do not park in kthread_create_on_cpu() kthread: kthread worker API cleanup kthread: rename probe_kthread_data() to kthread_probe_data() scripts/tags.sh: enable code completion in VIM mm: kmemleak: avoid using __va() on addresses that don't have a lowmem mapping kdump, vmcoreinfo: report memory sections virtual addresses ipc/sem.c: add cond_resched in exit_sme ...
2016-10-11treewide: remove redundant #include <linux/kconfig.h>Masahiro Yamada1-1/+0
Kernel source files need not include <linux/kconfig.h> explicitly because the top Makefile forces to include it with: -include $(srctree)/include/linux/kconfig.h This commit removes explicit includes except the following: * arch/s390/include/asm/facilities_src.h * tools/testing/radix-tree/linux/kernel.h These two are used for host programs. Link: http://lkml.kernel.org/r/1473656164-11929-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-11radix-tree tests: properly initialize mutexRoss Zwisler1-1/+1
The pthread_mutex_t in regression1.c wasn't being initialized properly. Link: http://lkml.kernel.org/r/20160815194237.25967-4-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-11radix-tree tests: add iteration testRoss Zwisler4-1/+184
There are four cases I can see where we could end up with a NULL 'slot' in radix_tree_next_slot(). This unit test exercises all four of them, making sure that if in the future we have an unsafe path through radix_tree_next_slot(), we'll catch it. Here are details on the four cases: 1) radix_tree_iter_retry() via a non-tagged iteration like radix_tree_for_each_slot(). In this case we currently aren't seeing a bug because radix_tree_iter_retry() sets iter->next_index = iter->index; which means that in in the else case in radix_tree_next_slot(), 'count' is zero, so we skip over the while() loop and effectively just return NULL without ever dereferencing 'slot'. 2) radix_tree_iter_retry() via tagged iteration like radix_tree_for_each_tagged(). This case was giving us NULL pointer dereferences in testing, and was fixed with this commit: commit 3cb9185c6730 ("radix-tree: fix radix_tree_iter_retry() for tagged iterators.") This fix doesn't explicitly check for 'slot' being NULL, though, it works around the NULL pointer dereference by instead zeroing iter->tags in radix_tree_iter_retry(), which makes us bail out of the if() case in radix_tree_next_slot() before we dereference 'slot'. 3) radix_tree_iter_next() via via a non-tagged iteration like radix_tree_for_each_slot(). This currently happens in shmem_tag_pins() and shmem_partial_swap_usage(). As with non-tagged iteration, 'count' in the else case of radix_tree_next_slot() is zero, so we skip over the while() loop and effectively just return NULL without ever dereferencing 'slot'. 4) radix_tree_iter_next() via tagged iteration like radix_tree_for_each_tagged(). This happens in shmem_wait_for_pins(). radix_tree_iter_next() zeros out iter->tags, so we end up exiting radix_tree_next_slot() here: if (flags & RADIX_TREE_ITER_TAGGED) { void *canon = slot; iter->tags >>= 1; if (unlikely(!iter->tags)) return NULL; Link: http://lkml.kernel.org/r/20160815194237.25967-3-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-11Merge tag 'libnvdimm-for-4.9' of ↵Linus Torvalds4-48/+276
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "Aside from the recently added pmem sub-division support these have been in -next for several releases with no reported issues. The sub- division support was included in next-20161010 with no reported issues. It passes all unit tests including new tests for all the new functionality below. Summary: - PMEM sub-division support: Allow a single PMEM region to be divided into multiple namespaces. Originally, ~2 years ago, it was thought that partitions of a /dev/pmemX block device could handle sub-allocations of persistent memory for different use cases. With the decision to not support DAX mappings of raw block-devices, and the genesis of device-dax, the need for having multiple pmem-namespace per region has grown. - Device-DAX unified inode: In support of dynamic-resizing of a device-dax instance the kernel arranges for all mappings of a device-dax node to share the same inode. This allows unmap / truncate / invalidation events to affect all instances of the device similar to the behavior of mmap on block devices. - Hardware error scrubbing reworks: The original address-range-scrub and badblocks tracking solution allowed clearing entries at the individual namespace level, but it failed to clear the internal list of media errors maintained at the bus level. The result was that the next scrub or namespace disable/re-enable event would restore the cleared badblocks, but now that is fixed. The v4.8 kernel introduced an auto-scrub-on-machine-check behavior to repopulate the badblocks list. Now, in v4.9, the auto-scrub behavior can be disabled and simply arrange for the error reported in the machine-check to be added to the list. - DIMM health-event notification support: ACPI 6.1 defines a notification event code that can be send to ACPI NVDIMM devices. A poll(2) capable file descriptor for these events can be obtained from the nmemX/nfit/flags sysfs-attribute of a libnvdimm memory device. - Miscellaneous fixes: NVDIMM-N probe error, device-dax build error, and a change to dedup the flush hint list to not flush the memory controller more than necessary" * tag 'libnvdimm-for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (39 commits) /dev/dax: fix Kconfig dependency build breakage dax: use correct dev_t value dax: convert devm_create_dax_dev to PTR_ERR libnvdimm, namespace: allow creation of multiple pmem-namespaces per region libnvdimm, namespace: lift single pmem limit in scan_labels() libnvdimm, namespace: filter out of range labels in scan_labels() libnvdimm, namespace: enable allocation of multiple pmem namespaces libnvdimm, namespace: update label implementation for multi-pmem libnvdimm, namespace: expand pmem device naming scheme for multi-pmem libnvdimm, region: update nd_region_available_dpa() for multi-pmem support libnvdimm, namespace: sort namespaces by dpa at init libnvdimm, namespace: allow multiple pmem-namespaces per region at scan time tools/testing/nvdimm: support for sub-dividing a pmem region libnvdimm, namespace: unify blk and pmem label scanning libnvdimm, namespace: refactor uuid_show() into a namespace_to_uuid() helper libnvdimm, label: convert label tracking to a linked list libnvdimm, region: move region-mapping input-paramters to nd_mapping_desc nvdimm: reduce duplicated wpq flushes libnvdimm: clear the internal poison_list when clearing badblocks pmem: reduce kmap_atomic sections to the memcpys only ...
2016-10-11selftests/futex: Check ANSI terminal color supportSeongJae Park2-2/+2
Because test for color support of the running shell does not aware ANSI type terminals, it does not print colorful messages on some environemnt. This commit modifies the test to aware ANSI type terminal, too. Signed-off-by: SeongJae Park <sj38.park@gmail.com> Acked-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2016-10-11objtool: Support '-mtune=atom' stack frame setup instructionJosh Poimboeuf1-0/+9
Arnd reported that enabling CONFIG_MATOM results in a bunch of objtool false positive frame pointer warnings: arch/x86/events/intel/ds.o: warning: objtool: intel_pmu_pebs_del()+0x43: call without frame pointer save/setup security/keys/keyring.o: warning: objtool: keyring_read()+0x59: call without frame pointer save/setup kernel/signal.o: warning: objtool: __dequeue_signal()+0xd8: call without frame pointer save/setup ... objtool gets confused by the fact that the '-mtune=atom' GCC option sometimes uses 'lea (%rsp),%rbp' instead of 'mov %rsp,%rbp'. The instructions are effectively the same, but objtool doesn't know about the 'lea' variant. Fix the false warnings by adding support for 'lea (%rsp),%rbp' in the objtool decoder. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-10Merge branch 'mm-pkeys-for-linus' of ↵Linus Torvalds3-1/+1631
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull protection keys syscall interface from Thomas Gleixner: "This is the final step of Protection Keys support which adds the syscalls so user space can actually allocate keys and protect memory areas with them. Details and usage examples can be found in the documentation. The mm side of this has been acked by Mel" * 'mm-pkeys-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/pkeys: Update documentation x86/mm/pkeys: Do not skip PKRU register if debug registers are not used x86/pkeys: Fix pkeys build breakage for some non-x86 arches x86/pkeys: Add self-tests x86/pkeys: Allow configuration of init_pkru x86/pkeys: Default to a restrictive init PKRU pkeys: Add details of system call use to Documentation/ generic syscalls: Wire up memory protection keys syscalls x86: Wire up protection keys system calls x86/pkeys: Allocation/free syscalls x86/pkeys: Make mprotect_key() mask off additional vm_flags mm: Implement new pkey_mprotect() system call x86/pkeys: Add fault handling for PF_PK page fault bit
2016-10-10Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds42-75/+2011
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf tooling updates from Thomas Gleixner: - handle uretprobe placement proper on little endian PPC64 - fix buffer handling in libtraceevent - add a missing pointer derefence in perf probe - fix the build of host tools in cross builds - fix Intel PT timestamp handling - synchronize memcpy, cpufeatures and bpf headers with the kernel headers - support for vendor supplied JSON files describing PMU events - a new set of tool tips - initial work for clang/llvm support - address some style issues found by cppcheck * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (35 commits) tools build: Add feature detection for g++ tools build: Support compiling C++ source file perf top/report: Add tips about a list option perf report/top: Add a tip about system-wide collection from all CPUs perf report/top: Add a tip about source line numbers with overhead tools: Synchronize tools/include/uapi/linux/bpf.h tools: Synchronize tools/arch/x86/include/asm/cpufeatures.h perf bench mem: Sync memcpy assembly sources with the kernel perf jevents: Fix Intel JSON fixed counter conversions tools lib traceevent: Fix kbuffer_read_at_offset() perf intel-pt: Fix MTC timestamp calculation for large MTC periods perf intel-pt: Fix estimated timestamps for cycle-accurate mode perf uretprobe ppc64le: Fix probe location perf pmu-events: Add Skylake frontend MSR support perf pmu-events: Fix fixed counters on Intel perf tools: Make alias matching case-insensitive perf tools: Allow period= in perf stat CPU event descriptions. perf tools: Add README for info on parsing JSON/map files perf list jevents: Add support for event list topics perf list: Support long jevents descriptions ...
2016-10-07Merge branch 'akpm' (patches from Andrew)Linus Torvalds5-62/+361
Merge updates from Andrew Morton: - fsnotify updates - ocfs2 updates - all of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (127 commits) console: don't prefer first registered if DT specifies stdout-path cred: simpler, 1D supplementary groups CREDITS: update Pavel's information, add GPG key, remove snail mail address mailmap: add Johan Hovold .gitattributes: set git diff driver for C source code files uprobes: remove function declarations from arch/{mips,s390} spelling.txt: "modeled" is spelt correctly nmi_backtrace: generate one-line reports for idle cpus arch/tile: adopt the new nmi_backtrace framework nmi_backtrace: do a local dump_stack() instead of a self-NMI nmi_backtrace: add more trigger_*_cpu_backtrace() methods min/max: remove sparse warnings when they're nested Documentation/filesystems/proc.txt: add more description for maps/smaps mm, proc: fix region lost in /proc/self/smaps proc: fix timerslack_ns CAP_SYS_NICE check when adjusting self proc: add LSM hook checks to /proc/<tid>/timerslack_ns proc: relax /proc/<tid>/timerslack_ns capability requirements meminfo: break apart a very long seq_printf with #ifdefs seq/proc: modify seq_put_decimal_[u]ll to take a const char *, not char proc: faster /proc/*/status ...
2016-10-07Merge tag 'powerpc-4.9-1' of ↵Linus Torvalds23-157/+1426
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Highlights: - Major rework of Book3S 64-bit exception vectors (Nicholas Piggin) - Use gas sections for arranging exception vectors et. al. - Large set of TM cleanups and selftests (Cyril Bur) - Enable transactional memory (TM) lazily for userspace (Cyril Bur) - Support for XZ compression in the zImage wrapper (Oliver O'Halloran) - Add support for bpf constant blinding (Naveen N. Rao) - Beginnings of upstream support for PA Semi Nemo motherboards (Darren Stevens) Fixes: - Ensure .mem(init|exit).text are within _stext/_etext (Michael Ellerman) - xmon: Don't use ld on 32-bit (Michael Ellerman) - vdso64: Use double word compare on pointers (Anton Blanchard) - powerpc/nvram: Fix an incorrect partition merge (Pan Xinhui) - powerpc: Fix usage of _PAGE_RO in hugepage (Christophe Leroy) - powerpc/mm: Update FORCE_MAX_ZONEORDER range to allow hugetlb w/4K (Aneesh Kumar K.V) - Fix memory leak in queue_hotplug_event() error path (Andrew Donnellan) - Replay hypervisor maintenance interrupt first (Nicholas Piggin) Various performance optimisations (Anton Blanchard): - Align hot loops of memset() and backwards_memcpy() - During context switch, check before setting mm_cpumask - Remove static branch prediction in atomic{, 64}_add_unless - Only disable HAVE_EFFICIENT_UNALIGNED_ACCESS on POWER7 little endian - Set default CPU type to POWER8 for little endian builds Cleanups & features: - Sparse fixes/cleanups (Daniel Axtens) - Preserve CFAR value on SLB miss caused by access to bogus address (Paul Mackerras) - Radix MMU fixups for POWER9 (Aneesh Kumar K.V) - Support for setting used_(vsr|vr|spe) in sigreturn path (for CRIU) (Simon Guo) - Optimise syscall entry for virtual, relocatable case (Nicholas Piggin) - Optimise MSR handling in exception handling (Nicholas Piggin) - Support for kexec with Radix MMU (Benjamin Herrenschmidt) - powernv EEH fixes (Russell Currey) - Suprise PCI hotplug support for powernv (Gavin Shan) - Endian/sparse fixes for powernv PCI (Gavin Shan) - Defconfig updates (Anton Blanchard) - KVM: PPC: Book3S HV: Migrate pinned pages out of CMA (Balbir Singh) - cxl: Flush PSL cache before resetting the adapter (Frederic Barrat) - cxl: replace loop with for_each_child_of_node(), remove unneeded of_node_put() (Andrew Donnellan) - Fix HV facility unavailable to use correct handler (Nicholas Piggin) - Remove unnecessary syscall trampoline (Nicholas Piggin) - fadump: Fix build break when CONFIG_PROC_VMCORE=n (Michael Ellerman) - Quieten EEH message when no adapters are found (Anton Blanchard) - powernv: Add PHB register dump debugfs handle (Russell Currey) - Use kprobe blacklist for exception handlers & asm functions (Nicholas Piggin) - Document the syscall ABI (Nicholas Piggin) - MAINTAINERS: Update cxl maintainers (Michael Neuling) - powerpc: Remove all usages of NO_IRQ (Michael Ellerman) Minor cleanups: - Andrew Donnellan, Christophe Leroy, Colin Ian King, Cyril Bur, Frederic Barrat, Pan Xinhui, PrasannaKumar Muralidharan, Rui Teng, Simon Guo" * tag 'powerpc-4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (156 commits) powerpc/bpf: Add support for bpf constant blinding powerpc/bpf: Implement support for tail calls powerpc/bpf: Introduce accessors for using the tmp local stack space powerpc/fadump: Fix build break when CONFIG_PROC_VMCORE=n powerpc: tm: Enable transactional memory (TM) lazily for userspace powerpc/tm: Add TM Unavailable Exception powerpc: Remove do_load_up_transact_{fpu,altivec} powerpc: tm: Rename transct_(*) to ck(\1)_state powerpc: tm: Always use fp_state and vr_state to store live registers selftests/powerpc: Add checks for transactional VSXs in signal contexts selftests/powerpc: Add checks for transactional VMXs in signal contexts selftests/powerpc: Add checks for transactional FPUs in signal contexts selftests/powerpc: Add checks for transactional GPRs in signal contexts selftests/powerpc: Check that signals always get delivered selftests/powerpc: Add TM tcheck helpers in C selftests/powerpc: Allow tests to extend their kill timeout selftests/powerpc: Introduce GPR asm helper header file selftests/powerpc: Move VMX stack frame macros to header file selftests/powerpc: Rework FPU stack placement macros and move to header file selftests/powerpc: Check for VSX preservation across userspace preemption ...
2016-10-07selftests: expanding more mlock selftestSimon Guo3-78/+295
This patch will randomly perform mlock/mlock2 on a given memory region, and verify the RLIMIT_MEMLOCK limitation works properly. Suggested-by: David Rientjes <rientjes@google.com> Link: http://lkml.kernel.org/r/1473325970-11393-4-git-send-email-wei.guo.simon@gmail.com Signed-off-by: Simon Guo <wei.guo.simon@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Eric B Munson <emunson@akamai.com> Cc: Simon Guo <wei.guo.simon@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Alexey Klimov <klimov.linux@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07selftest: move seek_to_smaps_entry() out of mlock2-tests.cSimon Guo2-42/+42
Function seek_to_smaps_entry() can be useful for other selftest functionalities, so move it out to header file. Link: http://lkml.kernel.org/r/1473325970-11393-3-git-send-email-wei.guo.simon@gmail.com Signed-off-by: Simon Guo <wei.guo.simon@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Eric B Munson <emunson@akamai.com> Cc: Simon Guo <wei.guo.simon@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Alexey Klimov <klimov.linux@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07selftests/vm: add test for mlock() when areas are intersectedSimon Guo3-0/+81
This patch adds mlock() test for multiple invocation on the same address area, and verify it doesn't mess the rlimit mlock limitation. Link: http://lkml.kernel.org/r/1472554781-9835-5-git-send-email-wei.guo.simon@gmail.com Signed-off-by: Simon Guo <wei.guo.simon@gmail.com> Cc: Alexey Klimov <klimov.linux@gmail.com> Cc: Eric B Munson <emunson@akamai.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Simon Guo <wei.guo.simon@gmail.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07selftest: split mlock2_ funcs into separate mlock2.hSimon Guo2-20/+21
To prepare mlock2.h whose functionality will be reused. Link: http://lkml.kernel.org/r/1472554781-9835-4-git-send-email-wei.guo.simon@gmail.com Signed-off-by: Simon Guo <wei.guo.simon@gmail.com> Cc: Alexey Klimov <klimov.linux@gmail.com> Cc: Eric B Munson <emunson@akamai.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Simon Guo <wei.guo.simon@gmail.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07Merge branch 'for-4.9/libnvdimm' into libnvdimm-for-nextDan Williams4-48/+276
2016-10-07tools/testing/nvdimm: support for sub-dividing a pmem regionDan Williams3-43/+124
Update nfit_test to handle multiple sub-allocations within a given pmem region. The mock resource now tracks and un-tracks sub-ranges as they are requested and released (either explicitly or via devm callback). Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-10-06Merge branch 'for-linus' of ↵Linus Torvalds4-0/+182
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull namespace updates from Eric Biederman: "This set of changes is a number of smaller things that have been overlooked in other development cycles focused on more fundamental change. The devpts changes are small things that were a distraction until we managed to kill off DEVPTS_MULTPLE_INSTANCES. There is an trivial regression fix to autofs for the unprivileged mount changes that went in last cycle. A pair of ioctls has been added by Andrey Vagin making it is possible to discover the relationships between namespaces when referring to them through file descriptors. The big user visible change is starting to add simple resource limits to catch programs that misbehave. With namespaces in general and user namespaces in particular allowing users to use more kinds of resources, it has become important to have something to limit errant programs. Because the purpose of these limits is to catch errant programs the code needs to be inexpensive to use as it always on, and the default limits need to be high enough that well behaved programs on well behaved systems don't encounter them. To this end, after some review I have implemented per user per user namespace limits, and use them to limit the number of namespaces. The limits being per user mean that one user can not exhause the limits of another user. The limits being per user namespace allow contexts where the limit is 0 and security conscious folks can remove from their threat anlysis the code used to manage namespaces (as they have historically done as it root only). At the same time the limits being per user namespace allow other parts of the system to use namespaces. Namespaces are increasingly being used in application sand boxing scenarios so an all or nothing disable for the entire system for the security conscious folks makes increasing use of these sandboxes impossible. There is also added a limit on the maximum number of mounts present in a single mount namespace. It is nontrivial to guess what a reasonable system wide limit on the number of mount structure in the kernel would be, especially as it various based on how a system is using containers. A limit on the number of mounts in a mount namespace however is much easier to understand and set. In most cases in practice only about 1000 mounts are used. Given that some autofs scenarious have the potential to be 30,000 to 50,000 mounts I have set the default limit for the number of mounts at 100,000 which is well above every known set of users but low enough that the mount hash tables don't degrade unreaonsably. These limits are a start. I expect this estabilishes a pattern that other limits for resources that namespaces use will follow. There has been interest in making inotify event limits per user per user namespace as well as interest expressed in making details about what is going on in the kernel more visible" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (28 commits) autofs: Fix automounts by using current_real_cred()->uid mnt: Add a per mount namespace limit on the number of mounts netns: move {inc,dec}_net_namespaces into #ifdef nsfs: Simplify __ns_get_path tools/testing: add a test to check nsfs ioctl-s nsfs: add ioctl to get a parent namespace nsfs: add ioctl to get an owning user namespace for ns file descriptor kernel: add a helper to get an owning user namespace for a namespace devpts: Change the owner of /dev/pts/ptmx to the mounter of /dev/pts devpts: Remove sync_filesystems devpts: Make devpts_kill_sb safe if fsi is NULL devpts: Simplify devpts_mount by using mount_nodev devpts: Move the creation of /dev/pts/ptmx into fill_super devpts: Move parse_mount_options into fill_super userns: When the per user per user namespace limit is reached return ENOSPC userns; Document per user per user namespace limits. mntns: Add a limit on the number of mount namespaces. netns: Add a limit on the number of net namespaces cgroupns: Add a limit on the number of cgroup namespaces ipcns: Add a limit on the number of ipc namespaces ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 12:32:31 +0000