summaryrefslogtreecommitdiffstats
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2011-08-02Merge branch 'tools-release' of ↵Linus Torvalds2-26/+25
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6 * 'tools-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6: tools/power turbostat: fit output into 80 columns on snb-ep tools/power x86_energy_perf_policy: fix print of uninitialized string
2011-08-02tools/power turbostat: fit output into 80 columns on snb-epLen Brown1-23/+23
Reduce columns for package number to 1. If you can afford more than 9 packages, you can also afford a terminal with more than 80 columns:-) Also shave a column also off the package C-states Signed-off-by: Len Brown <len.brown@intel.com>
2011-07-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/cpupowerutilsLinus Torvalds70-0/+13855
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/cpupowerutils: cpupower: Do detect IDA (opportunistic processor performance) via cpuid cpupower: Show Intel turbo ratio support via ./cpupower frequency-info cpupowerutils: increase MAX_LINE_LEN cpupower: Rename package from cpupowerutils to cpupower cpupowerutils: Rename: libcpufreq->libcpupower cpupowerutils: use kernel version-derived version string cpupowerutils: utils - ConfigStyle bugfixes cpupowerutils: helpers - ConfigStyle bugfixes cpupowerutils: idle_monitor - ConfigStyle bugfixes cpupowerutils: lib - ConfigStyle bugfixes cpupowerutils: bench - ConfigStyle bugfixes cpupowerutils: do not update po files on each and every compile cpupowerutils: remove ccdv, use kernel quiet/verbose mechanism cpupowerutils: use COPYING, CREDITS from top-level directory cpupowerutils - cpufrequtils extended with quite some features
2011-07-30Merge branch 'slub/lockless' of ↵Linus Torvalds1-19/+40
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6 * 'slub/lockless' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6: (21 commits) slub: When allocating a new slab also prep the first object slub: disable interrupts in cmpxchg_double_slab when falling back to pagelock Avoid duplicate _count variables in page_struct Revert "SLUB: Fix build breakage in linux/mm_types.h" SLUB: Fix build breakage in linux/mm_types.h slub: slabinfo update for cmpxchg handling slub: Not necessary to check for empty slab on load_freelist slub: fast release on full slab slub: Add statistics for the case that the current slab does not match the node slub: Get rid of the another_slab label slub: Avoid disabling interrupts in free slowpath slub: Disable interrupts in free_debug processing slub: Invert locking and avoid slab lock slub: Rework allocator fastpaths slub: Pass kmem_cache struct to lock and freeze slab slub: explicit list_lock taking slub: Add cmpxchg_double_slab() mm: Rearrange struct page slub: Move page->frozen handling near where the page->freelist handling occurs slub: Do not use frozen page flag but a bit in the page counters ...
2011-07-29cpupower: Do detect IDA (opportunistic processor performance) via cpuidThomas Renninger4-41/+9
IA32-Intel Devel guide Volume 3A - 14.3.2.1 ------------------------------------------- ... Opportunistic processor performance operation can be disabled by setting bit 38 of IA32_MISC_ENABLES. This mechanism is intended for BIOS only. If IA32_MISC_ENABLES[38] is set, CPUID.06H:EAX[1] will return 0. Better detect things via cpuid, this cleans up the code a bit and the MSR parts were not working correctly anyway. Signed-off-by: Thomas Renninger <trenn@suse.de> CC: lenb@kernel.org CC: linux@dominikbrodowski.net CC: cpufreq@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-07-29cpupower: Show Intel turbo ratio support via ./cpupower frequency-infoThomas Renninger4-17/+95
This adds the last piece missing from turbostat (if called with -v). It shows on Intel machines supporting Turbo Boost how many cores have to be active/idle to enter which boost mode (frequency). Whether the HW really enters these boost modes can be verified via ./cpupower monitor. Signed-off-by: Thomas Renninger <trenn@suse.de> CC: lenb@kernel.org CC: linux@dominikbrodowski.net CC: cpufreq@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-07-29cpupowerutils: increase MAX_LINE_LENRoman Vasiyarov1-1/+1
larger sysfs data (>255 bytes) was truncated and thus used improperly [linux@dominikbrodowski.net: adapted to cpupowerutils] Signed-off-by: Roman Vasiyarov <rvasiyarov@gmail.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-07-29cpupower: Rename package from cpupowerutils to cpupowerThomas Renninger1-6/+6
Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-07-29cpupowerutils: Rename: libcpufreq->libcpupowerThomas Renninger3-18/+17
[linux@dominikbrodowski.net: fix .gitignore] Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-07-29cpupowerutils: use kernel version-derived version stringDominik Brodowski2-7/+41
As cpupowerutils is intended to be included into the kernel sources, use the kernel versioning instead of a custom version. The script utils/version-gen.sh is largely based on the script already found in tools/perf/util/PERF-VERSION-GEN . Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-07-29cpupowerutils: utils - ConfigStyle bugfixesDominik Brodowski6-108/+122
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-07-29cpupowerutils: helpers - ConfigStyle bugfixesDominik Brodowski9-86/+100
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-07-29cpupowerutils: idle_monitor - ConfigStyle bugfixesDominik Brodowski6-115/+128
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-07-29cpupowerutils: lib - ConfigStyle bugfixesDominik Brodowski4-172/+209
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-07-29cpupowerutils: bench - ConfigStyle bugfixesDominik Brodowski8-58/+75
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-07-29cpupowerutils: do not update po files on each and every compileDominik Brodowski1-7/+16
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-07-29cpupowerutils: remove ccdv, use kernel quiet/verbose mechanismDominik Brodowski4-411/+24
Use the quiet/verbose mechanism found in kernel tools, without relying on the special tool "ccdv" Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-07-29cpupowerutils: use COPYING, CREDITS from top-level directoryDominik Brodowski2-358/+0
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-07-29cpupowerutils - cpufrequtils extended with quite some featuresDominik Brodowski72-0/+14417
CPU power consumption vs performance tuning is no longer limited to CPU frequency switching anymore: deep sleep states, traditional dynamic frequency scaling and hidden turbo/boost frequencies are tied close together and depend on each other. The first two exist on different architectures like PPC, Itanium and ARM, the latter (so far) only on X86. On X86 the APU (CPU+GPU) will only run most efficiently if CPU and GPU has proper power management in place. Users and Developers want to have *one* tool to get an overview what their system supports and to monitor and debug CPU power management in detail. The tool should compile and work on as many architectures as possible. Once this tool stabilizes a bit, it is intended to replace the Intel-specific tools in tools/power/x86 Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-07-26Merge branch 'for-linus' of ↵Linus Torvalds2-149/+963
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-ktest * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-ktest: ktest: Fix bug when ADD_CONFIG is set but MIN_CONFIG is not ktest: Keep fonud configs separate from default configs ktest: Add prompt to use OUTPUT_MIN_CONFIG ktest: Use Kconfig dependencies to shorten time to make min_config ktest: Add test type make_min_config ktest: Require one TEST_START in config file ktest: Add helper function to avoid duplicate code ktest: Add IGNORE_WARNINGS to ignore warnings in some patches ktest: Fix tar extracting of modules to target ktest: Have the testing tmp dir include machine name ktest: Add POST/PRE_BUILD options ktest: Allow initrd processing without modules defined ktest: Have LOG_FILE evaluate options as well ktest: Have wait on stdio honor bug timeout ktest: Implement our own force min config ktest: Add TEST_NAME option ktest: Add CONFIG_BISECT_GOOD option ktest: Add detection of triple faults ktest: Notify reason to break out of monitoring boot
2011-07-23Merge branches 'x86-urgent-for-linus', 'core-debug-for-linus', ↵Linus Torvalds1-1/+4
'irq-core-for-linus' and 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: um: Make rwsem.S depend on CONFIG_RWSEM_XCHGADD_ALGORITHM * 'core-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: debug: Make CONFIG_EXPERT select CONFIG_DEBUG_KERNEL to unhide debug options * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: genirq: Remove unused CHECK_IRQ_PER_CPU() * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf tools, x86: Fix 32-bit compile on 64-bit system
2011-07-21perf tools, x86: Fix 32-bit compile on 64-bit systemDavid Ahern1-1/+4
Builds for 32-bit perf binaries on a 64-bit host currently fail with this error: [...] bench/../../../arch/x86/lib/memcpy_64.S: Assembler messages: bench/../../../arch/x86/lib/memcpy_64.S:29: Error: bad register name `%rdi' bench/../../../arch/x86/lib/memcpy_64.S:34: Error: invalid instruction suffix for `movs' bench/../../../arch/x86/lib/memcpy_64.S:50: Error: bad register name `%rdi' bench/../../../arch/x86/lib/memcpy_64.S:61: Error: bad register name `%rdi' ... The problem is the detection of the host arch without considering passed in flags. This change fixes 32-bit builds via: make EXTRA_CFLAGS=-m32 and 64-bit builds still reference the memcpy_64.S. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: <stable@kernel.org> Link: http://lkml.kernel.org/r/1310420304-21452-1-git-send-email-dsahern@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-21perf tools: Make test use the preset debugfs pathJiri Olsa1-2/+2
Use preset debugfs path instead of hardcoded one. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: acme@redhat.com Cc: a.p.zijlstra@chello.nl Cc: paulus@samba.org Link: http://lkml.kernel.org/r/1310635534-4013-4-git-send-email-jolsa@redhat.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-21perf tools: Add automated tests for events parsingJiri Olsa1-0/+245
Adding builtin test for parse_events function, which is responsible for parsing/processing "-e" option for stat/top/record commands. This new test will run within the builtin test command suite (perf test). One or several tests were added for each type of event. More tests could be added easily if needed. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: acme@redhat.com Cc: a.p.zijlstra@chello.nl Cc: paulus@samba.org Link: http://lkml.kernel.org/r/1310635534-4013-3-git-send-email-jolsa@redhat.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-21perf tools: De-opt the parse_events functionJiri Olsa5-14/+24
Moving out the option parameter from parse_events function, and adding new parse_events_option function instead. The option parameter is used only to carry "struct perf_evlist" pointer for chaining new events. Putting it away, enable us to call parse_events from other places without using the option parameter. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: acme@redhat.com Cc: a.p.zijlstra@chello.nl Cc: paulus@samba.org Link: http://lkml.kernel.org/r/1310635534-4013-2-git-send-email-jolsa@redhat.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-21perf script: Fix display of IP address for non-callchain pathDavid Ahern1-1/+1
Non-callchain path is using al.addr which prints as: openssl 14564 17672.003587: 7862d _x86_64_AES_encrypt_compact This should be sample->ip to print as: openssl 14564 17672.003587: 3f7867862d _x86_64_AES_encrypt_compact Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: acme@ghostprotocols.net Cc: peterz@infradead.org Cc: paulus@samba.org Link: http://lkml.kernel.org/r/1306768587-15376-1-git-send-email-dsahern@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-21perf tools: Fix endian conversion reading event attr from file headerDavid Ahern3-13/+23
The perf_event_attr struct has two __u32's at the top and they need to be swapped individually. With this change I was able to analyze a perf.data collected in a 32-bit PPC VM on an x86 system. I tested both 32-bit and 64-bit binaries for the Intel analysis side; both read the PPC perf.data file correctly. -v2: - changed the existing perf_event__attr_swap() to swap only elements of perf_event_attr and exported it for use in swapping the attributes in the file header - updated swap_ops used for processing events Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: acme@ghostprotocols.net Cc: peterz@infradead.org Cc: paulus@samba.org Cc: <stable@kernel.org> Link: http://lkml.kernel.org/r/1310754849-12474-1-git-send-email-dsahern@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-21perf tools: Add missing 'node' alias to the hw_cache[] arrayJiri Olsa1-5/+8
Add "node" as a simple alias for NODE cache events. The addition of NODE cache events broke the parse_alias function, so any mismatched event caused the segfault, like: # ./perf stat -e krava ls The hw_cache/hw_cache_op/hw_cache_result arrays needs to follow PERF_COUNT_HW_CACHE_*MAX enums. Adding those MAXs to be size of those arrays, so possible ommision in future wil not lead to segfault. Adding read/write/prefetch as allowed operations for node cache event. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: acme@redhat.com Link: http://lkml.kernel.org/r/20110713205818.GB7827@jolsa.brq.redhat.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-15tools/power x86_energy_perf_policy: fix print of uninitialized stringLen Brown1-3/+2
Looks like I was going to stick the brand string in the verbose ouput, but didn't get around to it. Signed-off-by: Len Brown <len.brown@intel.com>
2011-07-15ktest: Fix bug when ADD_CONFIG is set but MIN_CONFIG is notSteven Rostedt1-12/+7
The MIN_CONFIG is a single config that is considered to have all the configs that are required to boot the box. ADD_CONFIG is a list of configs that we add that may contain configs known to be broken (set off) or just configs that we want every box to have and this can include shared configs. If a config has no MIN_CONFIG defined, but has multiple files defined for the ADD_CONFIG, the test will die, because the MIN_CONFIG will default to ADD_CONFIG. The problem is the code to open MIN_CONFIG expects a string of one file, not multiple, and the open will fail. Since the real minconfig that is used is a concatination of MIN_CONFIG and ADD_CONFIG files, we change the code to open that instead of whatever MIN_CONFIG defaults to. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15ktest: Keep fonud configs separate from default configsSteven Rostedt1-4/+8
The IGNORE_CONFIG file holds the configs that we don't want to change (with their proper settings). But on start up, the make noconfig is executed, and the configs that are on are also put into the ignore config category. But these are configs that were forced on by the kconfig scripts and not something that we found must be enabled to boot our machine. By keeping the configs that are forced on by default, separate from the configs we found that are required to boot the box, we can get a much more interesting IGNORE_CONFIG. In fact, the IGNORE_CONFIG can usually end up being the must have configs to boot, and only have 6 or 7 configs set. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15ktest: Add prompt to use OUTPUT_MIN_CONFIGSteven Rostedt2-14/+59
If the defined OUTPUT_MIN_CONFIG in the make_min_config test exists, then give a prompt to ask the user if they want to use that config instead, as it is very often the case, especially when the test has been interrupted. The OUTPUT_MIN_CONFIG is usually the config that one wants to use to continue the test where they left off. But if START_MIN_CONFIG is defined (thus the MIN_CONFIG is not the default), then do not prompt, as it will be annoying if the user has this as one of many tests, and the test pauses waiting for input, while the user is sleeping. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15ktest: Use Kconfig dependencies to shorten time to make min_configSteven Rostedt2-22/+273
To save time, the test does not just grab any option and test it. The Kconfig files are examined to determine the dependencies of the configs. If a config is chosen that depends on another config, that config will be checked first. By checking the parents first, we can eliminate whole groups of configs that may have been enabled. For example, if a USB device config is chosen and depends on CONFIG_USB, the CONFIG_USB will be tested before the device. If CONFIG_USB is found not to be needed, it, as well as all configs that depend on it, will be disabled and removed from the current min_config. Note, the code from streamline_config (make localmodconfig) was copied and used to find the dependencies in the Kconfig file. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15ktest: Add test type make_min_configSteven Rostedt2-4/+301
After doing a make localyesconfig, your kernel configuration may not be the most useful minimum configuration. Having a true minimum config that you can use against other configs is very useful if someone else has a config that breaks on your code. By only forcing those configurations that are truly required to boot your machine will give you less of a chance that one of your set configurations will make the bug go away. This will give you a better chance to be able to reproduce the reported bug matching the broken config. Note, this does take some time, and may require you to run the test over night, or perhaps over the weekend. But it also allows you to interrupt it, and gives you the current minimum config that was found till that time. Note, this test automatically assumes a BUILD_TYPE of oldconfig and its test type acts like boot. TODO: add a test version that makes the config do more than just boot, like having network access. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15perf probe: Support adding probes on offline kernel modulesMasami Hiramatsu3-12/+49
Support adding probes on offline kernel modules. This enables perf-probe to trace kernel-module init functions via perf-probe. If user gives the path of module with -m option, perf-probe expects the module is offline. This feature works with --add, --funcs, and --vars. E.g) # perf probe -m /lib/modules/`uname -r`/kernel/fs/btrfs/btrfs.ko \ -a "extent_io_init:5 extent_state_cache" Add new events: probe:extent_io_init (on extent_io_init:5 with extent_state_cache) probe:extent_io_init_1 (on extent_io_init:5 with extent_state_cache) You can now use it on all perf tools, such as: perf record -e probe:extent_io_init_1 -aR sleep 1 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Link: http://lkml.kernel.org/r/20110627072751.6528.10230.stgit@fedora15 Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15perf probe: Add probed module in front of functionMasami Hiramatsu2-9/+39
Add probed module name and ":" in front of function name if -m module option is given. In the result, the symbol name passed to kprobe-tracer becomes MODULE:FUNCTION, so that kallsyms can solve it as a symbol in the module correctly. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Link: http://lkml.kernel.org/r/20110627072745.6528.26416.stgit@fedora15 Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15perf probe: Introduce debuginfo to encapsulate dwarf informationMasami Hiramatsu3-136/+182
Introduce debuginfo to encapsulate dwarf information. This new object allows us to reuse and expand debuginfo easily. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Link: http://lkml.kernel.org/r/20110627072739.6528.12438.stgit@fedora15 Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15perf-probe: Move dwarf library routines to dwarf-aux.{c, h}Masami Hiramatsu5-523/+768
Move dwarf library related routines to dwarf-aux.{c,h}. This includes several minor changes. - Add simple documents for each API. - Rename die_find_real_subprogram() to die_find_realfunc() - Rename line_walk_handler_t to line_walk_callback_t. - Minor cleanups. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Link: http://lkml.kernel.org/r/20110627072727.6528.57647.stgit@fedora15 Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15perf probe: Remove redundant dwarf functionsMasami Hiramatsu1-37/+13
Since there are dwarf_bitsize, dwarf_bitoffset and dwarf_bytesize defined in libdw, we don't need die_get_bit_size, die_get_bit_offset and die_get_byte_size anymore. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Link: http://lkml.kernel.org/r/20110627072721.6528.2747.stgit@fedora15 Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15perf probe: Move strtailcmp to string.cMasami Hiramatsu3-15/+20
Since strtailcmp() is enough generic, it should be defined in string.c. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Link: http://lkml.kernel.org/r/20110627072715.6528.10677.stgit@fedora15 Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15perf probe: Rename DIE_FIND_CB_FOUND to DIE_FIND_CB_ENDMasami Hiramatsu1-6/+6
Since die_find/walk* callbacks use DIE_FIND_CB_FOUND for both of failed and found cases, it should be "END" instead "FOUND" for avoiding confusion. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reported-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@elte.hu> Link: http://lkml.kernel.org/r/20110627072709.6528.45706.stgit@fedora15 Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-14perf: Robustify proc and debugfs file recordingSonny Rao1-91/+29
While attempting to create a timechart of boot up I found perf didn't tolerate modules being loaded/unloaded. This patch fixes this by reading the file once and then writing the size read at the correct point in the file. It also simplifies the code somewhat. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Sonny Rao <sonnyrao@chromium.org> Signed-off-by: Michael Neuling <mikey@neuling.org> Link: http://lkml.kernel.org/r/10011.1310614483@neuling.org Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-05perf report/annotate/script: Add option to specify a CPU rangeAnton Blanchard8-0/+102
Add an option to perf report/annotate/script to specify which CPUs to operate on. This enables us to take a single system wide profile and analyse each CPU (or group of CPUs) in isolation. This was useful when profiling a multiprocess workload where the bottleneck was on one CPU but this was hidden in the overall profile. Per process and per thread breakdowns didn't help because multiple processes were running on each CPU and no single process consumed an entire CPU. The patch converts the list of CPUs returned by cpu_map__new into a bitmap for fast lookup. I wanted to use -C to be consistent with perf top/record/stat, but unfortunately perf report already uses -C <comms>. v2: Incorporate suggestions from David Ahern: - Added -c to perf script - Check that SAMPLE_CPU is set when -c is used - Update documentation v3: Create perf_session__cpu_bitmap() Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: David Ahern <dsahern@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Link: http://lkml.kernel.org/r/20110704215750.11647eb9@kryten Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-02slub: slabinfo update for cmpxchg handlingChristoph Lameter1-19/+40
Update the statistics handling and the slabinfo tool to include the new statistics in the reports it generates. Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Pekka Enberg <penberg@kernel.org>
2011-07-01perf stat: Add noise output for csv modeZhengyu He1-3/+6
Previously, when you want perf-stat to output the statistics in csv mode, no information of the noise will be printed out. For example right now we output this --repeat information: ./perf stat -r3 -x, sleep 1 1.164789,task-clock 8,context-switches 0,CPU-migrations 219,page-faults 3337800,cycles With this patch, the output will be appended with an additional entry for the noise value: ./perf stat -r3 -x, sleep 1 1.164789,task-clock,3.75% 8,context-switches,75.00% 0,CPU-migrations,100.00% 219,page-faults,0.00% 3337800,cycles,3.36% Signed-off-by: Zhengyu He <zhengyuh@google.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Stephane Eranian <eranian@google.com> Cc: Venkatesh Pallipadi <venki@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/1308861942-4945-1-git-send-email-zhengyuh@google.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-01Merge branch 'perf/core' of ↵Ingo Molnar7-144/+169
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into perf/core
2011-07-01Merge commit 'v3.0-rc5' into perf/coreIngo Molnar3-2/+3
Merge reason: Pick up the latest fixes. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-06-30perf tools: Only display parent field if explictly sortedFrederic Weisbecker1-1/+8
We don't need to display the parent field if the parent sorting machinery is only used for parent filtering (as in "-p foo"). However if parent filtering is used in combination with explicit parent sorting ( -s parent), we want to display it. Result with: perf report -p kernel_thread -s parent Before: # Overhead Parent symbol # ........ ............. # 0.07% | --- ioread8 ata_sff_check_status ata_sff_tf_load ata_sff_qc_issue ata_bmdma_qc_issue ata_qc_issue ata_scsi_translate ata_scsi_queuecmd scsi_dispatch_cmd scsi_request_fn __blk_run_queue __make_request generic_make_request submit_bio submit_bh journal_submit_commit_record jbd2_journal_commit_transaction kjournald2 kthread kernel_thread_helpe After: # Overhead Parent symbol # ........ ............. # 0.07% kernel_thread_helper | --- ioread8 ata_sff_check_status ata_sff_tf_load ata_sff_qc_issue ata_bmdma_qc_issue ata_qc_issue ata_scsi_translate ata_scsi_queuecmd scsi_dispatch_cmd scsi_request_fn __blk_run_queue __make_request generic_make_request submit_bio submit_bh journal_submit_commit_record jbd2_journal_commit_transaction kjournald2 kthread kernel_thread_helper Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: David Ahern <dsahern@gmail.com> Cc: Sam Liao <phyomh@gmail.com>
2011-06-30perf tools: Allow sort dimensions to be registered more than onceFrederic Weisbecker1-6/+6
So that the parent sort dimension can be registered twice: once if we add it as an explicit sort dimension (-s parent) and twice if we request a parent filter (-p foo). We'll have only one parent sort dimension in the end but this allows to override the default parent filter with we gave in "-p" option. The goal of this is to prepare to allow the use of "-s parent" and "-p foo" at the same time, ie: sort by filtered parent. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: David Ahern <dsahern@gmail.com> Cc: Sam Liao <phyomh@gmail.com>
2011-06-30perf tools: Don't display ignored entries on stdio uiFrederic Weisbecker1-0/+3
As for newt ui, don't display entries that have been marked as ignored. The practical current effect of this is to make parent filtering really working. Before, entries that were ignored were given a null parent but were still displayed. This resulted in some weird effects: # Overhead Command Shared Object Symbol # ........ ........... ................. ............ # ^A | --- __lock_acquire | |--95.97%-- lock_acquire | | | |--30.75%-- _raw_spin_lock Discard these from the stdio display. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: David Ahern <dsahern@gmail.com> Cc: Sam Liao <phyomh@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-07 14:31:25 +0000