summaryrefslogtreecommitdiffstats
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2015-05-16Merge branch 'for-rc' of ↵Linus Torvalds1-8/+0
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal fixes from Zhang Rui: "Specifics: - fix an issue in intel_powerclamp driver that idle injection target is not accurately maintained on newer Intel CPUs. Package C8 to C10 states are introduced on these CPUs but they were not included in the package c-state residency calculation. From Jacob Pan. - fix a problem that package c-state idle injection was missing on Broadwell server, by adding its id to intel_powerclamp driver. From Jacob Pan. - a couple of small fixes and cleanups from Joe Perches, Mathias Krause, Dan Carpenter and Anand Moon" * 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: tools/thermal: tmon: fixed the 'make install' command thermal: rockchip: fix an error code thermal/powerclamp: fix missing newer package c-states thermal/intel_powerclamp: add id for broadwell server thermal/intel_powerclamp: add __init / __exit annotations thermal: Use bool function return values of true/false not 1/0
2015-05-16Merge tag 'linux-kselftest-4.1-rc4' of ↵Linus Torvalds5-35/+69
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "Urgent fix for Kselftest regression introduced in 4.1-rc1 by the new x86 test due to its hard dependency on 32-bit build environment. A set of 5 patches fix the make kselftest run and kselftest install" * tag 'linux-kselftest-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests, x86: Rework x86 target architecture detection selftests, x86: Remove useless run_tests rule selftests/x86: install tests selftest/x86: have no dependency on all when cross building selftest/x86: build both bitnesses
2015-05-15Merge branch 'liblockdep-fixes' of ↵Ingo Molnar2-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/sashal/linux into perf/urgent Pull liblockdep fixes from Sasha Levin: "two fixes that deal with compilation errors in liblockdep." Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-13tools/liblockdep: Fix compilation errorEunbong Song1-0/+3
Recent changes to kernel/locking/lockdep.c broke the liblockdep build. Fix that. Signed-off-by: Eunbong Song <eunb.song@samsung.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-05-13tools/liblockdep: Fix linker error in case of cross compileEunbong Song1-1/+2
If we try to cross compile liblockdep, even if we set the CROSS_COMPILE variable the linker error can occur because LD is not set with CROSS_COMPILE. This patch adds "LD" can be set automatically with CROSS_COMPILE variable so fixes linker error problem. Signed-off-by: Eunbong Song <eunb.song@samsung.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-05-12selftests, x86: Rework x86 target architecture detectionAndy Lutomirski4-26/+67
We currently fail to build on a non-multilib x86_64 target. We print a helpful error, but it's nicer to allow the build to succeed. Fix it and improve cross-compilation support by detecting architecture support directly and building only the relevant tests. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-05-12selftests, x86: Remove useless run_tests ruleAndy Lutomirski2-18/+2
Now that selftests/x86 uses the kselftest infrastructure, the run_x86_tests.sh mechanism is just in the way. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-05-12selftests/x86: install testsTyler Baker1-0/+6
Include lib.mk and set TEST_PROGS where appropriate. Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Tyler Baker <tyler.baker@linaro.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-05-12selftest/x86: have no dependency on all when cross buildingTyler Baker1-1/+4
If the CROSS_COMPILE is set remove all's dependency on all_32 and all_64. Cc: Andy Lutomirski <luto@amacapital.net> Acked-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Tyler Baker <tyler.baker@linaro.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-05-12selftest/x86: build both bitnessesTyler Baker1-2/+2
Using uname with the processor flag option in some cases can yield 'unknown' so lets use the machine flag option as it is deterministic. Add a dependency for all_32 when building on a x86 64 bit host so that both bitnesses are built in this case. Cc: Andy Lutomirski <luto@amacapital.net> Acked-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Tyler Baker <tyler.baker@linaro.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-05-12perf tools: Use getconf to determine number of online CPUsWill Deacon1-1/+1
Parsing /proc/cpuinfo is a fiddly, arch-dependent business and a recent change to get it working for Sparc broke arm and arm64 platforms. Use sysconf to determine the number of online CPUs only parsing /proc/cpuinfo when sysconf is not available. Signed-off-by: Will Deacon <will.deacon@arm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <david.ahern@oracle.com> Cc: Mark Rutland <Mark.Rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20150423140454.GJ1652@arm.com [ Made it fall back to parsing /proc when getconf not found ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-12tools: Fix tools/vm buildAndi Kleen1-1/+1
libabikfs.a doesn't exist anymore, so we now need to link with libapi.a. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/1426199953-15324-1-git-send-email-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-09tools/thermal: tmon: fixed the 'make install' commandAnand Moon1-8/+0
To install tmon we issue "make install" which produces bellow error. root@odroidxu3:/usr/src/odroidxu3-4.y-testing/tools/thermal/tmon# make install mkdir -p /usr/bin install -m 755 -p "tmon" "/usr/bin/tmon" mkdir -p / install -m 644 -p "" "/" install: cannot stat ‘’: No such file or directory make: [install] Error 1 (ignored) Signed-off-by: Anand Moon <linux.amoon@gmail.com> Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-05-06Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds10-45/+64
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Mostly tooling fixes, but also an uncore PMU driver fix and an uncore PMU driver hardware-enablement addition" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf probe: Fix segfault if passed with ''. perf report: Fix -T/--threads option to work again perf bench numa: Fix immediate meeting of convergence condition perf bench numa: Fixes of --quiet argument perf bench futex: Fix hung wakeup tasks after requeueing perf probe: Fix bug with global variables handling perf top: Fix a segfault when kernel map is restricted. tools lib traceevent: Fix build failure on 32-bit arch perf kmem: Fix compiles on RHEL6/OL6 tools lib api: Undefine _FORTIFY_SOURCE before setting it perf kmem: Consistently use PRIu64 for printing u64 values perf trace: Disable events and drain events when forked workload ends perf trace: Enable events when doing system wide tracing and starting a workload perf/x86/intel/uncore: Move PCI IDs for IMC to uncore driver perf/x86/intel/uncore: Add support for Intel Haswell ULT (lower power Mobile Processor) IMC uncore PMUs perf/x86/intel: Add cpu_(prepare|starting|dying) for core_pmu
2015-05-05perf probe: Fix segfault if passed with ''.Wang Nan1-0/+2
Since parse_perf_probe_point() deals with a user passed argument, we should not assume it to be a valid string. Without this patch, if pass '' to perf probe, a segfault raises: $ perf probe -a '' Segmentation fault This patch checks argument of parse_perf_probe_point() before string processing. After this patch: $ perf probe -a '' usage: perf probe [<options>] 'PROBEDEF' ['PROBEDEF' ...] or: perf probe [<options>] --add 'PROBEDEF' [--add 'PROBEDEF' ...] ... Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/r/1430210769-94177-1-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-01perf report: Fix -T/--threads option to work againNamhyung Kim1-1/+1
The commit 512ae1bd6acb ("perf tools: Consolidate management of default sort orders") changed default value of the 'sort_order' variable to NULL indicating that users don't set any sort keys on the command line. However it missed to update a check in perf_evlist__tty_browse_hists() so that 'perf report -T' cannot show the per-thread values after the normal output. This patch fixes it to work again. Note that the -T option only works on --stdio and neither --sort nor --parent option was given. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1430309328-28317-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-05-01selftests/powerpc: Fix the pmu install ruleMichael Ellerman1-1/+1
My patch to add install support for the powerpc selftests had a typo, leading to the three tests in the pmu directory itself not being installed. Fixes: 6faeeea44b84 ("selftests: Add install support for the powerpc tests") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-04-30Revert "powerpc/tm: Abort syscalls in active transactions"Michael Ellerman1-1/+1
This reverts commit feba40362b11341bee6d8ed58d54b896abbd9f84. Although the principle of this change is good, the implementation has a few issues. Firstly we can sometimes fail to abort a syscall because r12 may have been clobbered by C code if we went down the virtual CPU accounting path, or if syscall tracing was enabled. Secondly we have decided that it is safer to abort the syscall even earlier in the syscall entry path, so that we avoid the syscall tracing path when we are transactional. So that we have time to thoroughly test those changes we have decided to revert this for this merge window and will merge the fixed version in the next window. NB. Rather than reverting the selftest we just drop tm-syscall from TEST_PROGS so that it's not run by default. Fixes: feba40362b11 ("powerpc/tm: Abort syscalls in active transactions") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-04-27perf bench numa: Fix immediate meeting of convergence conditionPetr Holasek1-0/+8
This patch fixes the race in the beginning of benchmark run when some threads hasn't got assigned curr_cpu yet so they don't occur in nodes-of-process stats and benchmark concludes that all remaining threads are converged already. The race can be reproduced with small amount of threads and some bigger amount of shared process memory, e.g. one process, two threads and 5GB of process memory. Signed-off-by: Petr Holasek <pholasek@redhat.com> Reviewed-by: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1429198699-25039-4-git-send-email-pholasek@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-27perf bench numa: Fixes of --quiet argumentPetr Holasek1-2/+2
Corrected description and fixed function of --quiet argument. Signed-off-by: Petr Holasek <pholasek@redhat.com> Reviewed-by: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1429198699-25039-2-git-send-email-pholasek@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-27perf bench futex: Fix hung wakeup tasks after requeueingDavidlohr Bueso1-7/+8
The futex-requeue benchmark can hang because of missing wakeups once the benchmark is done, ie: [Run 1]: Requeued 1024 of 1024 threads in 0.3290 ms perf: couldn't wakeup all tasks (135/1024) This bug, while perhaps suggesting missing wakeups in kernel futex code, is merely a consequence of the crappy FUTEX_CMP_REQUEUE man page, incorrectly mentioning that the number of requeued tasks is in fact returned, not the wakeups. This patch acknowledges this and updates the corresponding futex_wake code around it. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Mel Gorman <mgorman@suse.de> Link: http://lkml.kernel.org/r/1429894848.10273.44.camel@stgolabs.net Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-27perf probe: Fix bug with global variables handlingHe Kuang1-1/+3
There are missing curly braces which causes find_variable() return wrong value when probing with global variables. This problem can be reproduced as following: $ perf probe -v --add='generic_perform_write global_variable_for_test' ... Try to find probe point from debuginfo. Probe point found: generic_perform_write+0 Searching 'global_variable_for_test' variable in context. An error occurred in debuginfo analysis (-2). Error: Failed to add events. Reason: No such file or directory (Code: -2) After this patch: $ perf probe -v --add='generic_perform_write global_variable_for_test' ... Converting variable global_variable_for_test into trace event. global_variable_for_test type is int. Found 1 probe_trace_events. Opening /sys/kernel/debug/tracing/kprobe_events write=1 Added new event: Writing event: p:probe/generic_perform_write _stext+1237464 global_variable_for_test=@global_variable_for_test+0:s32 probe:generic_perform_write (on generic_perform_write with global_variable_for_test) You can now use it in all perf tools, such as: perf record -e probe:generic_perform_write -aR sleep 1 Signed-off-by: He Kuang <hekuang@huawei.com> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1429949338-18678-1-git-send-email-hekuang@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-27perf top: Fix a segfault when kernel map is restricted.Wang Nan1-1/+1
Perf top raise a warning if a kernel sample is collected but kernel map is restricted. The warning message needs to dereference al.map->dso... However, previous perf_event__preprocess_sample() doesn't always guarantee al.map != NULL, for example, when kernel map is restricted. This patch validates al.map before dereferencing, avoid the segfault. Before this patch: $ cat /proc/sys/kernel/kptr_restrict 1 $ perf top -p 120183 perf: Segmentation fault -------- backtrace -------- /path/to/perf[0x509868] /lib64/libc.so.6(+0x3545f)[0x7f9a1540045f] /path/to/perf[0x448820] /path/to/perf(cmd_top+0xe3c)[0x44a5dc] /path/to/perf[0x4766a2] /path/to/perf(main+0x5f5)[0x42e545] /lib64/libc.so.6(__libc_start_main+0xf4)[0x7f9a153ecbd4] /path/to/perf[0x42e674] And gdb call trace: Program received signal SIGSEGV, Segmentation fault. perf_event__process_sample (machine=0xa44030, sample=0x7fffffffa4c0, evsel=0xa43b00, event=0x7ffff41c3000, tool=0x7fffffffa8a0) at builtin-top.c:736 736 !RB_EMPTY_ROOT(&al.map->dso->symbols[MAP__FUNCTION]) ? (gdb) bt #0 perf_event__process_sample (machine=0xa44030, sample=0x7fffffffa4c0, evsel=0xa43b00, event=0x7ffff41c3000, tool=0x7fffffffa8a0) at builtin-top.c:736 #1 perf_top__mmap_read_idx (top=top@entry=0x7fffffffa8a0, idx=idx@entry=0) at builtin-top.c:855 #2 0x000000000044a5dd in perf_top__mmap_read (top=0x7fffffffa8a0) at builtin-top.c:872 #3 __cmd_top (top=0x7fffffffa8a0) at builtin-top.c:997 #4 cmd_top (argc=<optimized out>, argv=<optimized out>, prefix=<optimized out>) at builtin-top.c:1267 #5 0x00000000004766a3 in run_builtin (p=p@entry=0x8a6ce8 <commands+264>, argc=argc@entry=3, argv=argv@entry=0x7fffffffdf70) at perf.c:371 #6 0x000000000042e546 in handle_internal_command (argv=0x7fffffffdf70, argc=3) at perf.c:430 #7 run_argv (argv=0x7fffffffdcf0, argcp=0x7fffffffdcfc) at perf.c:474 #8 main (argc=3, argv=0x7fffffffdf70) at perf.c:589 (gdb) Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/r/1429946703-80807-1-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-26Merge tag 'pm+acpi-4.1-rc1-2' of ↵Linus Torvalds1-2/+9
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management and ACPI updates from Rafael Wysocki: "These are fixes mostly (intel_pstate, ACPI core, ACPI EC driver, cpupower tool), a new CPU ID for the Intel RAPL driver and one intel_pstate driver improvement that didn't make it to my previous pull requests due to timing. Specifics: - Fix a build warning in the intel_pstate driver showing up in non-SMP builds (Borislav Petkov) - Change one of the intel_pstate's P-state selection parameters for Baytrail and Cherrytrail CPUs to significantly improve performance at the cost of a small increase in energy consumption (Kristen Carlson Accardi) - Fix a NULL pointer dereference in the ACPI EC driver due to an unsafe list walk in the query handler removal routine (Chris Bainbridge) - Get rid of a false-positive lockdep warning in the ACPI container hot-remove code (Rafael J Wysocki) - Prevent the ACPI device enumeration code from creating device objects of a wrong type in some cases (Rafael J Wysocki) - Add Skylake processors support to the Intel RAPL power capping driver (Brian Bian) - Drop the stale MAINTAINERS entry for the ACPI dock driver that is regarded as part of the ACPI core and maintained along with it now (Chao Yu) - Fix cpupower tool breakage caused by a library API change in libpci 3.3.0 (Lucas Stach)" * tag 'pm+acpi-4.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / scan: Add a scan handler for PRP0001 ACPI / scan: Annotate physical_node_lock in acpi_scan_is_offline() ACPI / EC: fix NULL pointer dereference in acpi_ec_remove_query_handler() MAINTAINERS: remove maintainship entry of docking station driver powercap / RAPL: Add support for Intel Skylake processors cpufreq: intel_pstate: Fix an annoying !CONFIG_SMP warning intel_pstate: Change the setpoint for Atom params cpupower: fix breakage from libpci API change
2015-04-24tools lib traceevent: Fix build failure on 32-bit archNamhyung Kim1-1/+1
In my i386 build, it failed like this: CC event-parse.o event-parse.c: In function 'print_str_arg': event-parse.c:3868:5: warning: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'uint64_t' [-Wformat] Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Javi Merino <javi.merino@arm.com> Link: http://lkml.kernel.org/r/20150424020218.GF1905@sejong Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-24perf kmem: Fix compiles on RHEL6/OL6David Ahern1-27/+27
0d68bc92c48 breaks compiles on RHEL6/OL6: cc1: warnings being treated as errors builtin-kmem.c: In function ‘search_page_alloc_stat’: builtin-kmem.c:322: error: declaration of ‘stat’ shadows a global declaration node = &parent->rb_left; /usr/include/sys/stat.h:455: error: shadowed declaration is here builtin-kmem.c: In function ‘perf_evsel__process_page_alloc_event’: builtin-kmem.c:378: error: declaration of ‘stat’ shadows a global declaration /usr/include/sys/stat.h:455: error: shadowed declaration is here builtin-kmem.c: In function ‘perf_evsel__process_page_free_event’: builtin-kmem.c:431: error: declaration of ‘stat’ shadows a global declaration /usr/include/sys/stat.h:455: error: shadowed declaration is here Rename local variable to pstat to avoid the name conflict. Signed-off-by: David Ahern <david.ahern@oracle.com> Link: http://lkml.kernel.org/r/1429033773-31383-1-git-send-email-david.ahern@oracle.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-23tools lib api: Undefine _FORTIFY_SOURCE before setting itBobby Powers1-1/+1
Some toolchains (like Hardened Gentoo) define _FORTIFY_SOURCE in the built-in, default args. This causes perf builds to fail with: <command-line>:0:0: error: "_FORTIFY_SOURCE" redefined [-Werror] <built-in>: note: this is the location of the previous definition cc1: all warnings being treated as errors To avoid this, undefine _FORTIFY_SOURCE before (possibly re-)defining it in tools/lib/api. v2 applies cleanly on top of already pulled kbuild changes for 4.1-rc1. Signed-off-by: Bobby Powers <bobbypowers@gmail.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Dirk Gouders <dirk@gouders.net> Cc: Michal Marek <mmarek@suse.cz> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: linux-kbuild@vger.kernel.org Link: http://lkml.kernel.org/r/1429658381-3039-1-git-send-email-bobbypowers@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-23perf kmem: Consistently use PRIu64 for printing u64 valuesWill Deacon1-2/+2
Building the perf tool for 32-bit ARM results in the following build error due to a combination of an incorrect conversion specifier and compiling with -Werror: builtin-kmem.c: In function ‘print_page_summary’: builtin-kmem.c:644:9: error: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 3 has type ‘u64’ [-Werror=format=] nr_alloc_freed, (total_alloc_freed_bytes) / 1024); ^ builtin-kmem.c:647:9: error: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 3 has type ‘u64’ [-Werror=format=] (total_page_alloc_bytes - total_alloc_freed_bytes) / 1024); ^ cc1: all warnings being treated as errors This patch fixes the problem by consistently using PRIu64 for printing out u64 values. Signed-off-by: Will Deacon <will.deacon@arm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1429796437-1790-1-git-send-email-will.deacon@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-23perf trace: Disable events and drain events when forked workload endsArnaldo Carvalho de Melo1-0/+5
We were not checking in the inner event processing loop if the forked workload had finished, which, on a busy system, may make it take a long time trying to drain events, entering a seemingly neverending loop, waiting for the system to get idle enough to make it drain the buffers. Fix it by disabling the events when 'done' is true, in the inner loop, to start draining what is in the buffers. Now: [root@ssdandy ~]# time trace --filter-pids 14003 -a sleep 1 | tail 996.748 ( 0.002 ms): sh/30296 rt_sigprocmask(how: SETMASK, nset: 0x7ffc83418160, sigsetsize: 8) = 0 996.751 ( 0.002 ms): sh/30296 rt_sigprocmask(how: BLOCK, nset: 0x7ffc834181f0, oset: 0x7ffc83418270, sigsetsize: 8) = 0 996.755 ( 0.002 ms): sh/30296 rt_sigaction(sig: INT, act: 0x7ffc83417f50, oact: 0x7ffc83417ff0, sigsetsize: 8) = 0 1004.543 ( 0.362 ms): tail/30198 ... [continued]: read()) = 4096 1004.548 ( 7.791 ms): sh/30296 wait4(upid: -1, stat_addr: 0x7ffc834181a0) ... 1004.975 ( 0.427 ms): tail/30198 read(buf: 0x7633f0, count: 8192) = 4096 1005.390 ( 0.410 ms): tail/30198 read(buf: 0x765410, count: 8192) = 4096 1005.743 ( 0.348 ms): tail/30198 read(buf: 0x7633f0, count: 8192) = 4096 1006.197 ( 0.449 ms): tail/30198 read(buf: 0x765410, count: 8192) = 4096 1006.492 ( 0.290 ms): tail/30198 read(buf: 0x7633f0, count: 8192) = 4096 real 0m1.219s user 0m0.704s sys 0m0.331s [root@ssdandy ~]# Reported-by: Michael Petlan <mpetlan@redhat.com> Suggested-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-p6kpn1b26qcbe47pufpw0tex@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-23perf trace: Enable events when doing system wide tracing and starting a workloadArnaldo Carvalho de Melo1-2/+3
commit f7aa222ff397 Author: Arnaldo Carvalho de Melo <acme@redhat.com> Date: Tue Feb 3 13:25:39 2015 -0300 perf trace: No need to enable evsels for workload started from perf The assumption was that whenever a workload is specified, the attr.enable_on_exec evsel flag would be set, but that is not happening when perf_record_opts.system_wide is set, for instance That resulted in both perf_evlist__enable() and attr.enable_on_exec being not called/set, which made the events to remain disabled while the workload runs, producing no output. Fix it, by calling perf_evlist__enable() in the 'trace' tool when forking and not targetting a workload started from trace v2: Test against !target__none(), as suggested by Namhyung Kim, that is what is used in perf_evsel__config() when deciding if the attr.enable_on_exec flag to be set. More work is needed to cover other cases such as opts->initial_delay. Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-27z7169pvfxgj8upic636syv@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-21Merge tag 'char-misc-4.1-rc1' of ↵Linus Torvalds2-3/+9
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here's the big char/misc driver patchset for 4.1-rc1. Lots of different driver subsystem updates here, nothing major, full details are in the shortlog. All of this has been in linux-next for a while" * tag 'char-misc-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (133 commits) mei: trace: remove unused TRACE_SYSTEM_STRING DTS: ARM: OMAP3-N900: Add lis3lv02d support Documentation: DT: lis302: update wakeup binding lis3lv02d: DT: add wakeup unit 2 and wakeup threshold lis3lv02d: DT: use s32 to support negative values Drivers: hv: hv_balloon: correctly handle num_pages>INT_MAX case Drivers: hv: hv_balloon: correctly handle val.freeram<num_pages case mei: replace check for connection instead of transitioning mei: use mei_cl_is_connected consistently mei: fix mei_poll operation hv_vmbus: Add gradually increased delay for retries in vmbus_post_msg() Drivers: hv: hv_balloon: survive ballooning request with num_pages=0 Drivers: hv: hv_balloon: eliminate jumps in piecewiese linear floor function Drivers: hv: hv_balloon: do not online pages in offline blocks hv: remove the per-channel workqueue hv: don't schedule new works in vmbus_onoffer()/vmbus_onoffer_rescind() hv: run non-blocking message handlers in the dispatch tasklet coresight: moving to new "hwtracing" directory coresight-tmc: Adding a status interface to sysfs coresight: remove the unnecessary configuration coresight-default-sink ...
2015-04-19Merge branch 'turbostat' of ↵Linus Torvalds3-161/+419
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull turbostat update from Len Brown: "Updates to the turbostat utility. Just one kernel dependency in this batch -- added a #define to msr-index.h" * 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: correct dumped pkg-cstate-limit value tools/power turbostat: calculate TSC frequency from CPUID(0x15) on SKL tools/power turbostat: correct DRAM RAPL units on recent Xeon processors tools/power turbostat: Initial Skylake support tools/power turbostat: Use $(CURDIR) instead of $(PWD) and add support for O= option in Makefile tools/power turbostat: modprobe msr, if needed tools/power turbostat: dump MSR_TURBO_RATIO_LIMIT2 tools/power turbostat: use new MSR_TURBO_RATIO_LIMIT names x86 msr-index: define MSR_TURBO_RATIO_LIMIT,1,2 tools/power turbostat: label base frequency tools/power turbostat: update PERF_LIMIT_REASONS decoding tools/power turbostat: simplify default output
2015-04-19Merge branches 'pm-cpufreq', 'powercap' and 'pm-tools'Rafael J. Wysocki1-2/+9
* pm-cpufreq: cpufreq: intel_pstate: Fix an annoying !CONFIG_SMP warning intel_pstate: Change the setpoint for Atom params * powercap: powercap / RAPL: Add support for Intel Skylake processors * pm-tools: cpupower: fix breakage from libpci API change
2015-04-18tools/power turbostat: correct dumped pkg-cstate-limit valueLen Brown1-9/+8
HSW expanded MSR_PKG_CST_CONFIG_CONTROL.Package-C-State-Limit, from bits[2:0] used by previous implementations, to [3:0]. The value 1000b is unlimited, and is used by BDW and SKL too. Signed-off-by: Len Brown <len.brown@intel.com>
2015-04-18tools/power turbostat: calculate TSC frequency from CPUID(0x15) on SKLLen Brown1-1/+38
turbostat --debug ... CPUID(0x15): eax_crystal: 2 ebx_tsc: 100 ecx_crystal_hz: 0 TSC: 1200 MHz (24000000 Hz * 100 / 2 / 1000000) Signed-off-by: Len Brown <len.brown@intel.com>
2015-04-18tools/power turbostat: correct DRAM RAPL units on recent Xeon processorsAndrey Semin1-3/+25
While not yet documented in the Software Developer's Manual, the data-sheet for modern Xeon states that DRAM RAPL ENERGY units are fixed at 15.3 uJ, rather than being discovered via MSR. Before this patch, DRAM energy on these products is over-stated by turbostat because the RAPL units are 4x larger. ref: "Xeon E5-2600 v3/E5-1600 v3 Datasheet Volume 2" http://www.intel.com/content/dam/www/public/us/en/documents/datasheets/xeon-e5-v3-datasheet-vol-2.pdf Signed-off-by: Andrey Semin <andrey.semin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2015-04-18tools/power turbostat: Initial Skylake supportLen Brown1-13/+111
Skylake adds some additional residency counters. Skylake supports a different mix of RAPL registers from any previous product. In most other ways, Skylake is like Broadwell. Signed-off-by: Len Brown <len.brown@intel.com>
2015-04-18tools/power turbostat: Use $(CURDIR) instead of $(PWD) and add support for ↵Thomas D1-1/+5
O= option in Makefile Since commit ee0778a30153 ("tools/power: turbostat: make Makefile a bit more capable") turbostat's Makefile is using [...] BUILD_OUTPUT := $(PWD) [...] which obviously causes trouble when building "turbostat" with make -C /usr/src/linux/tools/power/x86/turbostat ARCH=x86 turbostat because GNU make does not update nor guarantee that $PWD is set. This patch changes the Makefile to use $CURDIR instead, which GNU make guarantees to set and update (i.e. when using "make -C ...") and also adds support for the O= option (see "make help" in your root of your kernel source tree for more details). Link: https://bugs.gentoo.org/show_bug.cgi?id=533918 Fixes: ee0778a30153 ("tools/power: turbostat: make Makefile a bit more capable") Signed-off-by: Thomas D. <whissi@whissi.de> Cc: Mark Asselstine <mark.asselstine@windriver.com> Signed-off-by: Len Brown <len.brown@intel.com>
2015-04-18tools/power turbostat: modprobe msr, if neededLen Brown1-2/+3
Some distros (Ubuntu) ship the msr driver as a module. If turbosat is run as root on those systems, and discovers that there is no /dev/cpu/cpu0/msr, it will now "modprobe msr" for the user. If not root, the modprobe attempt will fail, and turbostat will exit as before: turbostat: no /dev/cpu/0/msr, Try "# modprobe msr" : No such file or directory Signed-off-by: Len Brown <len.brown@intel.com>
2015-04-18tools/power turbostat: dump MSR_TURBO_RATIO_LIMIT2Len Brown1-36/+105
and up to 18 cores of turbo ratio limit when using the turbostat --debug option. Signed-off-by: Len Brown <len.brown@intel.com>
2015-04-18tools/power turbostat: use new MSR_TURBO_RATIO_LIMIT namesLen Brown1-4/+4
s/MSR_NHM_TURBO_RATIO_LIMIT/MSR_TURBO_RATIO_LIMIT/ s/MSR_IVT_TURBO_RATIO_LIMIT/MSR_TURBO_RATIO_LIMIT1/ syntax only -- use the documented strings describing these registers. Signed-off-by: Len Brown <len.brown@intel.com>
2015-04-18Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds3-1/+184
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "This tree includes: - an FPU related crash fix - a ptrace fix (with matching testcase in tools/testing/selftests/) - an x86 Kconfig DMA-config defaults tweak to better avoid non-working drivers" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: config: Enable NEED_DMA_MAP_STATE by default when SWIOTLB is selected x86/fpu: Load xsave pointer *after* initialization x86/ptrace: Fix the TIF_FORCED_TF logic in handle_signal() x86, selftests: Add single_step_syscall test
2015-04-18Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds5-78/+567
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "This update has mostly fixes, but also other bits: - perf tooling fixes - PMU driver fixes - Intel Broadwell PMU driver HW-enablement for LBR callstacks - a late coming 'perf kmem' tool update that enables it to also analyze page allocation data. Note, this comes with MM tracepoint changes that we believe to not break anything: because it changes the formerly opaque 'struct page *' field that uniquely identifies pages to 'pfn' which identifies pages uniquely too, but isn't as opaque and can be used for other purposes as well" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/pt: Fix and clean up error handling in pt_event_add() perf/x86/intel: Add Broadwell support for the LBR callstack perf/x86/intel/rapl: Fix energy counter measurements but supporing per domain energy units perf/x86/intel: Fix Core2,Atom,NHM,WSM cycles:pp events perf/x86: Fix hw_perf_event::flags collision perf probe: Fix segfault when probe with lazy_line to file perf probe: Find compilation directory path for lazy matching perf probe: Set retprobe flag when probe in address-based alternative mode perf kmem: Analyze page allocator events also tracing, mm: Record pfn instead of pointer to struct page
2015-04-17Merge tag 'acpica-4.1-rc1' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPICA updates from Rafael Wysocki: "This updates the kernel's ACPICA code to upstream revision 20150410 and adds a fix for a GPE handling regression introduced during the 3.19 cycle on top of that. Included are two stable-candidate bug fixes (one of them fixing a 3.16 regression), multiple other fixes and a bunch of cleanups. Specifics: - Fix for a GPE handling regression on Dell Latitude D600 that caused GPE signaling to stop working on that machine, which appears to be due to a hardware glitch, but it used to work and it can be made work again in a relativly straightforward way (Rafael J Wysocki). - Fix for a mutex unlock regression related to the handling of ACPI tables introduced during the 3.16 development cycle (Octavian Purdila). - _REV modification to always return 2 which has been done by all versions of Windows since NT and the firmware people started to use it to distinguish between OSes in their AML and do some silly and wrong things on that basis (Bob Moore). - Fixes and cleanups related to the acpi_physicall_address data type including one stable-candidate fix for an issue occasionally occuring on 64-bit machines running 32-bit kernels where using offsets provided by the firmware may lead to address overflows (Lv Zheng). - External() opcode support infrastructure needed for recompiling disassembled ACPI tables in some cases including interpreter modification to ignore that opcode (Bob Moore). - Support for the "Windows 2015" string in _OSI (Bob Moore). - GPE debug interface change to return values read from hardware registers (Lv Zheng). - Removal of the __DATE__ macro usage in tools (Rasmus Villemoes). - Assorted minor fixes and cleanups (Lv Zheng, Rickard Strandqvist, Bob Moore)" * tag 'acpica-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits) ACPICA: Store GPE register enable masks upfront ACPICA: Update version to 20150410. ACPICA: Fix a couple issues with the local printf module. ACPICA: Disassembler: Some cleanup of the table dump module. ACPICA: iASL: Add support for MSDM ACPI table. ACPICA: Update for SLIC ACPI table. ACPICA: Add "//" before ascii output of buffers. ACPICA: Remove unused internal AML opcode. ACPICA: Permanently set _REV to the value '2'. ACPICA: Add "Windows 2015" string to _OSI support. ACPICA: Add infrastructure for External() opcode. ACPICA: iASL: Enhancement for constant folding. ACPICA: iASL/Disassembler: Add option to assume table contains valid AML. ACPICA: Update AML Debugger global variables. ACPICA: Update Resource descriptor dump module. ACPICA: Fix a sscanf format string. ACPICA: Casting changes around acpi_physical_address/acpi_size. ACPICA: Resources: Correct conditional compilation definitions. ACPICA: Utilities: Correct conditional compilation definitions. ACPICA: Tables: Move an iasl specific table function to iasl source file. ...
2015-04-16Merge tag 'powerpc-4.1-1' of ↵Linus Torvalds21-91/+852
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc updates from Michael Ellerman: - Numerous minor fixes, cleanups etc. - More EEH work from Gavin to remove its dependency on device_nodes. - Memory hotplug implemented entirely in the kernel from Nathan Fontenot. - Removal of redundant CONFIG_PPC_OF by Kevin Hao. - Rewrite of VPHN parsing logic & tests from Greg Kurz. - A fix from Nish Aravamudan to reduce memory usage by clamping nodes_possible_map. - Support for pstore on powernv from Hari Bathini. - Removal of old powerpc specific byte swap routines by David Gibson. - Fix from Vasant Hegde to prevent the flash driver telling you it was flashing your firmware when it wasn't. - Patch from Ben Herrenschmidt to add an OPAL heartbeat driver. - Fix for an oops causing get/put_cpu_var() imbalance in perf by Jan Stancek. - Some fixes for migration from Tyrel Datwyler. - A new syscall to switch the cpu endian by Michael Ellerman. - Large series from Wei Yang to implement SRIOV, reviewed and acked by Bjorn. - A fix for the OPAL sensor driver from Cédric Le Goater. - Fixes to get STRICT_MM_TYPECHECKS building again by Michael Ellerman. - Large series from Daniel Axtens to make our PCI hooks per PHB rather than per machine. - Small patch from Sam Bobroff to explicitly abort non-suspended transactions on syscalls, plus a test to exercise it. - Numerous reworks and fixes for the 24x7 PMU from Sukadev Bhattiprolu. - Small patch to enable the hard lockup detector from Anton Blanchard. - Fix from Dave Olson for missing L2 cache information on some CPUs. - Some fixes from Michael Ellerman to get Cell machines booting again. - Freescale updates from Scott: Highlights include BMan device tree nodes, an MSI erratum workaround, a couple minor performance improvements, config updates, and misc fixes/cleanup. * tag 'powerpc-4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (196 commits) powerpc/powermac: Fix build error seen with powermac smp builds powerpc/pseries: Fix compile of memory hotplug without CONFIG_MEMORY_HOTREMOVE powerpc: Remove PPC32 code from pseries specific find_and_init_phbs() powerpc/cell: Fix iommu breakage caused by controller_ops change powerpc/eeh: Fix crash in eeh_add_device_early() on Cell powerpc/perf: Cap 64bit userspace backtraces to PERF_MAX_STACK_DEPTH powerpc/perf/hv-24x7: Fail 24x7 initcall if create_events_from_catalog() fails powerpc/pseries: Correct memory hotplug locking powerpc: Fix missing L2 cache size in /sys/devices/system/cpu powerpc: Add ppc64 hard lockup detector support oprofile: Disable oprofile NMI timer on ppc64 powerpc/perf/hv-24x7: Add missing put_cpu_var() powerpc/perf/hv-24x7: Break up single_24x7_request powerpc/perf/hv-24x7: Define update_event_count() powerpc/perf/hv-24x7: Whitespace cleanup powerpc/perf/hv-24x7: Define add_event_to_24x7_request() powerpc/perf/hv-24x7: Rename hv_24x7_event_update powerpc/perf/hv-24x7: Move debug prints to separate function powerpc/perf/hv-24x7: Drop event_24x7_request() powerpc/perf/hv-24x7: Use pr_devel() to log message ... Conflicts: tools/testing/selftests/powerpc/Makefile tools/testing/selftests/powerpc/tm/Makefile
2015-04-16x86, selftests: Add single_step_syscall testAndy Lutomirski3-1/+184
This is a very simple test that makes system calls with TF set. This test currently fails when running the 32-bit build on a 64-bit kernel on an Intel CPU. This bug will be fixed by the next commit. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Shuah Khan <shuah.kh@samsung.com> Link: http://lkml.kernel.org/r/20e68021155f6ab5c60590dcad81d37c68ea2c4f.1429139075.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-15mm, selftests: test return value of munmap for MAP_HUGETLB memoryDavid Rientjes3-4/+14
When MAP_HUGETLB memory is unmapped, the length must be hugepage aligned, otherwise it fails with -EINVAL. All tests currently behave correctly, but it's better to explcitly test the return value for completeness and document the requirement, especially if users copy map_hugetlb.c as a sample implementation. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Joern Engel <joern@logfs.org> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Eric B Munson <emunson@akamai.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15cpupower: fix breakage from libpci API changeLucas Stach1-2/+9
libpci 3.3.0 introduced an additional member in the pci_filter struct which needs to be initialized to -1 to get the same behavior as before the API change. The libpci internal helpers got updated accordingly, but as the cpupower pci helpers initialized the struct themselves the behavior changed. Use the libpci helper pci_filter_init() to fix this and guard against similar breakages in the future. This fixes probing of the AMD fam12h/14h cpuidle monitor on systems with libpci >= 3.3.0. Signed-off-by: Lucas Stach <dev@lynxeye.de> Acked-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-04-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2-9/+20
Pull networking updates from David Miller: 1) Add BQL support to via-rhine, from Tino Reichardt. 2) Integrate SWITCHDEV layer support into the DSA layer, so DSA drivers can support hw switch offloading. From Floria Fainelli. 3) Allow 'ip address' commands to initiate multicast group join/leave, from Madhu Challa. 4) Many ipv4 FIB lookup optimizations from Alexander Duyck. 5) Support EBPF in cls_bpf classifier and act_bpf action, from Daniel Borkmann. 6) Remove the ugly compat support in ARP for ugly layers like ax25, rose, etc. And use this to clean up the neigh layer, then use it to implement MPLS support. All from Eric Biederman. 7) Support L3 forwarding offloading in switches, from Scott Feldman. 8) Collapse the LOCAL and MAIN ipv4 FIB tables when possible, to speed up route lookups even further. From Alexander Duyck. 9) Many improvements and bug fixes to the rhashtable implementation, from Herbert Xu and Thomas Graf. In particular, in the case where an rhashtable user bulk adds a large number of items into an empty table, we expand the table much more sanely. 10) Don't make the tcp_metrics hash table per-namespace, from Eric Biederman. 11) Extend EBPF to access SKB fields, from Alexei Starovoitov. 12) Split out new connection request sockets so that they can be established in the main hash table. Much less false sharing since hash lookups go direct to the request sockets instead of having to go first to the listener then to the request socks hashed underneath. From Eric Dumazet. 13) Add async I/O support for crytpo AF_ALG sockets, from Tadeusz Struk. 14) Support stable privacy address generation for RFC7217 in IPV6. From Hannes Frederic Sowa. 15) Hash network namespace into IP frag IDs, also from Hannes Frederic Sowa. 16) Convert PTP get/set methods to use 64-bit time, from Richard Cochran. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1816 commits) fm10k: Bump driver version to 0.15.2 fm10k: corrected VF multicast update fm10k: mbx_update_max_size does not drop all oversized messages fm10k: reset head instead of calling update_max_size fm10k: renamed mbx_tx_dropped to mbx_tx_oversized fm10k: update xcast mode before synchronizing multicast addresses fm10k: start service timer on probe fm10k: fix function header comment fm10k: comment next_vf_mbx flow fm10k: don't handle mailbox events in iov_event path and always process mailbox fm10k: use separate workqueue for fm10k driver fm10k: Set PF queues to unlimited bandwidth during virtualization fm10k: expose tx_timeout_count as an ethtool stat fm10k: only increment tx_timeout_count in Tx hang path fm10k: remove extraneous "Reset interface" message fm10k: separate PF only stats so that VF does not display them fm10k: use hw->mac.max_queues for stats fm10k: only show actual queues, not the maximum in hardware fm10k: allow creation of VLAN on default vid fm10k: fix unused warnings ...
2015-04-14Merge branch 'perf-core-for-linus' of ↵Linus Torvalds229-2445/+6322
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf changes from Ingo Molnar: "Core kernel changes: - One of the more interesting features in this cycle is the ability to attach eBPF programs (user-defined, sandboxed bytecode executed by the kernel) to kprobes. This allows user-defined instrumentation on a live kernel image that can never crash, hang or interfere with the kernel negatively. (Right now it's limited to root-only, but in the future we might allow unprivileged use as well.) (Alexei Starovoitov) - Another non-trivial feature is per event clockid support: this allows, amongst other things, the selection of different clock sources for event timestamps traced via perf. This feature is sought by people who'd like to merge perf generated events with external events that were measured with different clocks: - cluster wide profiling - for system wide tracing with user-space events, - JIT profiling events etc. Matching perf tooling support is added as well, available via the -k, --clockid <clockid> parameter to perf record et al. (Peter Zijlstra) Hardware enablement kernel changes: - x86 Intel Processor Trace (PT) support: which is a hardware tracer on steroids, available on Broadwell CPUs. The hardware trace stream is directly output into the user-space ring-buffer, using the 'AUX' data format extension that was added to the perf core to support hardware constraints such as the necessity to have the tracing buffer physically contiguous. This patch-set was developed for two years and this is the result. A simple way to make use of this is to use BTS tracing, the PT driver emulates BTS output - available via the 'intel_bts' PMU. More explicit PT specific tooling support is in the works as well - will probably be ready by 4.2. (Alexander Shishkin, Peter Zijlstra) - x86 Intel Cache QoS Monitoring (CQM) support: this is a hardware feature of Intel Xeon CPUs that allows the measurement and allocation/partitioning of caches to individual workloads. These kernel changes expose the measurement side as a new PMU driver, which exposes various QoS related PMU events. (The partitioning change is work in progress and is planned to be merged as a cgroup extension.) (Matt Fleming, Peter Zijlstra; CPU feature detection by Peter P Waskiewicz Jr) - x86 Intel Haswell LBR call stack support: this is a new Haswell feature that allows the hardware recording of call chains, plus tooling support. To activate this feature you have to enable it via the new 'lbr' call-graph recording option: perf record --call-graph lbr perf report or: perf top --call-graph lbr This hardware feature is a lot faster than stack walk or dwarf based unwinding, but has some limitations: - It reuses the current LBR facility, so LBR call stack and branch record can not be enabled at the same time. - It is only available for user-space callchains. (Yan, Zheng) - x86 Intel Broadwell CPU support and various event constraints and event table fixes for earlier models. (Andi Kleen) - x86 Intel HT CPUs event scheduling workarounds. This is a complex CPU bug affecting the SNB,IVB,HSW families that results in counter value corruption. The mitigation code is automatically enabled and is transparent. (Maria Dimakopoulou, Stephane Eranian) The perf tooling side had a ton of changes in this cycle as well, so I'm only able to list the user visible changes here, in addition to the tooling changes outlined above: User visible changes affecting all tools: - Improve support of compressed kernel modules (Jiri Olsa) - Save DSO loading errno to better report errors (Arnaldo Carvalho de Melo) - Bash completion for subcommands (Yunlong Song) - Add 'I' event modifier for perf_event_attr.exclude_idle bit (Jiri Olsa) - Support missing -f to override perf.data file ownership. (Yunlong Song) - Show the first event with an invalid filter (David Ahern, Arnaldo Carvalho de Melo) User visible changes in individual tools: 'perf data': New tool for converting perf.data to other formats, initially for the CTF (Common Trace Format) from LTTng (Jiri Olsa, Sebastian Siewior) 'perf diff': Add --kallsyms option (David Ahern) 'perf list': Allow listing events with 'tracepoint' prefix (Yunlong Song) Sort the output of the command (Yunlong Song) 'perf kmem': Respect -i option (Jiri Olsa) Print big numbers using thousands' group (Namhyung Kim) Allow -v option (Namhyung Kim) Fix alignment of slab result table (Namhyung Kim) 'perf probe': Support multiple probes on different binaries on the same command line (Masami Hiramatsu) Support unnamed union/structure members data collection. (Masami Hiramatsu) Check kprobes blacklist when adding new events. (Masami Hiramatsu) 'perf record': Teach 'perf record' about perf_event_attr.clockid (Peter Zijlstra) Support recording running/enabled time (Andi Kleen) 'perf sched': Improve the performance of 'perf sched replay' on high CPU core count machines (Yunlong Song) 'perf report' and 'perf top': Allow annotating entries in callchains in the hists browser (Arnaldo Carvalho de Melo) Indicate which callchain entries are annotated in the TUI hists browser (Arnaldo Carvalho de Melo) Add pid/tid filtering to 'report' and 'script' commands (David Ahern) Consider PERF_RECORD_ events with cpumode == 0 in 'perf top', removing one cause of long term memory usage buildup, i.e. not processing PERF_RECORD_EXIT events (Arnaldo Carvalho de Melo) 'perf stat': Report unsupported events properly (Suzuki K. Poulose) Output running time and run/enabled ratio in CSV mode (Andi Kleen) 'perf trace': Handle legacy syscalls tracepoints (David Ahern, Arnaldo Carvalho de Melo) Only insert blank duration bracket when tracing syscalls (Arnaldo Carvalho de Melo) Filter out the trace pid when no threads are specified (Arnaldo Carvalho de Melo) Dump stack on segfaults (Arnaldo Carvalho de Melo) No need to explicitely enable evsels for workload started from perf, let it be enabled via perf_event_attr.enable_on_exec, removing some events that take place in the 'perf trace' before a workload is really started by it. (Arnaldo Carvalho de Melo) Allow mixing with tracepoints and suppressing plain syscalls. (Arnaldo Carvalho de Melo) There's also been a ton of infrastructure work done, such as the split-out of perf's build system into tools/build/ and other changes - see the shortlog and changelog for details" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (358 commits) perf/x86/intel/pt: Clean up the control flow in pt_pmu_hw_init() perf evlist: Fix type for references to data_head/tail perf probe: Check the orphaned -x option perf probe: Support multiple probes on different binaries perf buildid-list: Fix segfault when show DSOs with hits perf tools: Fix cross-endian analysis perf tools: Fix error path to do closedir() when synthesizing threads perf tools: Fix synthesizing fork_event.ppid for non-main thread perf tools: Add 'I' event modifier for exclude_idle bit perf report: Don't call map__kmap if map is NULL. perf tests: Fix attr tests perf probe: Fix ARM 32 building error perf tools: Merge all perf_event_attr print functions perf record: Add clockid parameter perf sched replay: Use replay_repeat to calculate the runavg of cpu usage instead of the default value 10 perf sched replay: Support using -f to override perf.data file ownership perf sched replay: Fix the EMFILE error caused by the limitation of the maximum open files perf sched replay: Handle the dead halt of sem_wait when create_tasks() fails for any task perf sched replay: Fix the segmentation fault problem caused by pr_err in threads perf sched replay: Realloc the memory of pid_to_task stepwise to adapt to the different pid_max configurations ...