summaryrefslogtreecommitdiffstats
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2019-01-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds12-92/+1317
Pull networking fixes from David Miller: 1) Fix endless loop in nf_tables, from Phil Sutter. 2) Fix cross namespace ip6_gre tunnel hash list corruption, from Olivier Matz. 3) Don't be too strict in phy_start_aneg() otherwise we might not allow restarting auto negotiation. From Heiner Kallweit. 4) Fix various KMSAN uninitialized value cases in tipc, from Ying Xue. 5) Memory leak in act_tunnel_key, from Davide Caratti. 6) Handle chip errata of mv88e6390 PHY, from Andrew Lunn. 7) Remove linear SKB assumption in fou/fou6, from Eric Dumazet. 8) Missing udplite rehash callbacks, from Alexey Kodanev. 9) Log dirty pages properly in vhost, from Jason Wang. 10) Use consume_skb() in neigh_probe() as this is a normal free not a drop, from Yang Wei. Likewise in macvlan_process_broadcast(). 11) Missing device_del() in mdiobus_register() error paths, from Thomas Petazzoni. 12) Fix checksum handling of short packets in mlx5, from Cong Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (96 commits) bpf: in __bpf_redirect_no_mac pull mac only if present virtio_net: bulk free tx skbs net: phy: phy driver features are mandatory isdn: avm: Fix string plus integer warning from Clang net/mlx5e: Fix cb_ident duplicate in indirect block register net/mlx5e: Fix wrong (zero) TX drop counter indication for representor net/mlx5e: Fix wrong error code return on FEC query failure net/mlx5e: Force CHECKSUM_UNNECESSARY for short ethernet frames tools: bpftool: Cleanup license mess bpf: fix inner map masking to prevent oob under speculation bpf: pull in pkt_sched.h header for tooling to fix bpftool build selftests: forwarding: Add a test case for externally learned FDB entries selftests: mlxsw: Test FDB offload indication mlxsw: spectrum_switchdev: Do not treat static FDB entries as sticky net: bridge: Mark FDB entries that were added by user as such mlxsw: spectrum_fid: Update dummy FID index mlxsw: pci: Return error on PCI reset timeout mlxsw: pci: Increase PCI SW reset timeout mlxsw: pci: Ring CQ's doorbell before RDQ's MAINTAINERS: update email addresses of liquidio driver maintainers ...
2019-01-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller7-16/+1218
Daniel Borkmann says: ==================== pull-request: bpf 2019-01-20 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix a out-of-bounds access in __bpf_redirect_no_mac, from Willem. 2) Fix bpf_setsockopt to reset sock dst on SO_MARK changes, from Peter. 3) Fix map in map masking to prevent out-of-bounds access under speculative execution, from Daniel. 4) Fix bpf_setsockopt's SO_MAX_PACING_RATE to support TCP internal pacing, from Yuchung. 5) Fix json writer license in bpftool, from Thomas. 6) Fix AF_XDP to check if an actually queue exists during umem setup, from Krzysztof. 7) Several fixes to BPF stackmap's build id handling. Another fix for bpftool build to account for libbfd variations wrt linking requirements, from Stanislav. 8) Fix BPF samples build with clang by working around missing asm goto, from Yonghong. 9) Fix libbpf to retry program load on signal interrupt, from Lorenz. 10) Various minor compile warning fixes in BPF code, from Mathieu. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18tools: bpftool: Cleanup license messThomas Gleixner2-11/+1
Precise and non-ambiguous license information is important. The recent relicensing of the bpftools introduced a license conflict. The files have now: SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause and * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version Amazingly about 20 people acked that change and neither they nor the committer noticed. Oh well. Digging deeper: The files were imported from the iproute2 repository with the GPL V2 or later boiler plate text in commit b66e907cfee2 ("tools: bpftool: copy JSON writer from iproute2 repository") Looking at the iproute2 repository at git://git.kernel.org/pub/scm/network/iproute2/iproute2.git the following commit is the equivivalent: commit d9d8c839 ("json_writer: add SPDX Identifier (GPL-2/BSD-2)") That commit explicitly removes the boiler plate and relicenses the code uner GPL-2.0-only and BSD-2-Clause. As Steven wrote the original code and also the relicensing commit, it's assumed that the relicensing was intended to do exaclty that. Just the kernel side update failed to remove the boiler plate. Do so now. Fixes: 907b22365115 ("tools: bpftool: dual license all files") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Roman Gushchin <guro@fb.com> Cc: YueHaibing <yuehaibing@huawei.com> Cc: Yonghong Song <yhs@fb.com> Cc: Stanislav Fomichev <sdf@google.com> Cc: Sean Young <sean@mess.org> Cc: Jiri Benc <jbenc@redhat.com> Cc: David Calavera <david.calavera@gmail.com> Cc: Andrey Ignatov <rdna@fb.com> Cc: Joe Stringer <joe@wand.net.nz> Cc: David Ahern <dsahern@gmail.com> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Petar Penkov <ppenkov@stanford.edu> Cc: Sandipan Das <sandipan@linux.ibm.com> Cc: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Taeung Song <treeze.taeung@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Quentin Monnet <quentin.monnet@netronome.com> CC: okash.khawaja@gmail.com Cc: netdev@vger.kernel.org Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-18bpf: pull in pkt_sched.h header for tooling to fix bpftool buildDaniel Borkmann1-0/+1163
Dan reported that bpftool does not compile for him: $ make tools/bpf DESCEND bpf Auto-detecting system features: .. libbfd: [ on ] .. disassembler-four-args: [ OFF ] DESCEND bpftool Auto-detecting system features: .. libbfd: [ on ] .. disassembler-four-args: [ OFF ] CC /opt/linux.git/tools/bpf/bpftool/net.o In file included from /opt/linux.git/tools/include/uapi/linux/pkt_cls.h:6:0, from /opt/linux.git/tools/include/uapi/linux/tc_act/tc_bpf.h:14, from net.c:13: net.c: In function 'show_dev_tc_bpf': net.c:164:21: error: 'TC_H_CLSACT' undeclared (first use in this function) handle = TC_H_MAKE(TC_H_CLSACT, TC_H_MIN_INGRESS); [...] Fix it by importing pkt_sched.h header copy into tooling infrastructure. Fixes: 49a249c38726 ("tools/bpftool: copy a few net uapi headers to tools directory") Fixes: f6f3bac08ff9 ("tools/bpf: bpftool: add net support") Reported-by: Dan Gilson <dan_gilson@yahoo.com> Reference: https://bugzilla.kernel.org/show_bug.cgi?id=202315 Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-18selftests: forwarding: Add a test case for externally learned FDB entriesIdo Schimmel1-1/+33
Test that externally learned FDB entries can roam, but not age out. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18selftests: mlxsw: Test FDB offload indicationIdo Schimmel1-0/+20
Test that externally learned FDB entries added from user space are marked as offloaded. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-19Merge tag 'powerpc-5.0-3' of ↵Linus Torvalds3-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "A couple of weeks of fixes. There's one fix for an oops on Power9 machines with Open CAPI adapters. And a fix for probable memory corruption in some of the new NPU code, caught by smatch though and not seen in the wild. Plus a few other minor fixes. There's one non-fix which is the perf_regs change. That was sent during the merge window but I accidentally only merged the first of two patches in the series. It's been in linux-next so hopefully doesn't conflict with anything in acme's tree. Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Breno Leitao, Christian Lamparter, Christophe Leroy, Dan Carpenter, Frederic Barrat, Greg Kurz, Jason A. Donenfeld, Madhavan Srinivasan" * tag 'powerpc-5.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/syscalls: Fix syscall tracing powerpc/pseries: Fix build break due to pnv_npu2_init() powerpc/4xx/ocm: Fix fix for phys_addr_t printf warnings powerpc/powernv/npu: Fix oops in pnv_try_setup_npu_table_group() powerpc/tm: Limit TM code inside PPC_TRANSACTIONAL_MEM powerpc/8xx: fix setting of pagetable for Abatron BDI debug tool. powerpc/powernv/npu: Allocate enough memory in pnv_try_setup_npu_table_group() powerpc/perf: Update perf_regs structure to include MMCRA
2019-01-17selftests/bpf: retry tests that expect build-idStanislav Fomichev1-0/+30
While running test_progs in a loop I found out that I'm sometimes hitting "Didn't find expected build ID from the map" error. Looking at stack_map_get_build_id_offset() it seems that it is racy (by design) and can sometimes return BPF_STACK_BUILD_ID_IP (i.e. can't trylock current->mm->mmap_sem). Let's retry this test a single time. Fixes: 13790d1cc72c ("bpf: add selftest for stackmap with build_id in NMI context") Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-16selftests: tc-testing: fix parsing of ife typeDavide Caratti1-44/+44
In iproute2 commit 90c5c969f0b9 ("fix print_0xhex on 32 bit"), the format specifier for the ife type changed from 0x%X to %#llX, causing systematic failures in the following TDC test cases: 7682 - Create valid ife encode action with mark and pass control ef47 - Create valid ife encode action with mark and pipe control df43 - Create valid ife encode action with mark and continue control e4cf - Create valid ife encode action with mark and drop control ccba - Create valid ife encode action with mark and reclassify control a1cf - Create valid ife encode action with mark and jump control cb3d - Create valid ife encode action with mark value at 32-bit maximum 95ed - Create valid ife encode action with prio and pass control aa17 - Create valid ife encode action with prio and pipe control 74c7 - Create valid ife encode action with prio and continue control 7a97 - Create valid ife encode action with prio and drop control f66b - Create valid ife encode action with prio and reclassify control 3056 - Create valid ife encode action with prio and jump control 7dd3 - Create valid ife encode action with prio value at 32-bit maximum 05bb - Create valid ife encode action with tcindex and pass control ce65 - Create valid ife encode action with tcindex and pipe control 09cd - Create valid ife encode action with tcindex and continue control 8eb5 - Create valid ife encode action with tcindex and continue control 451a - Create valid ife encode action with tcindex and drop control d76c - Create valid ife encode action with tcindex and reclassify control e731 - Create valid ife encode action with tcindex and jump control b7b8 - Create valid ife encode action with tcindex value at 16-bit maximum 2a9c - Create valid ife encode action with mac src parameter cf5c - Create valid ife encode action with mac dst parameter 2353 - Create valid ife encode action with mac src and mac dst parameters 552c - Create valid ife encode action with mark and type parameters 0421 - Create valid ife encode action with prio and type parameters 4017 - Create valid ife encode action with tcindex and type parameters fac3 - Create valid ife encode action with index at 32-bit maximnum 7c25 - Create valid ife decode action with pass control dccb - Create valid ife decode action with pipe control 7bb9 - Create valid ife decode action with continue control d9ad - Create valid ife decode action with drop control 219f - Create valid ife decode action with reclassify control 8f44 - Create valid ife decode action with jump control b330 - Create ife encode action with cookie Change 'matchPattern' values, allowing '0' and '0x0' if ife type is equal to 0, and accepting both '0x' and '0X' otherwise, to let these tests pass both with old and new tc binaries. While at it, fix a small typo in test case fac3 ('maximnum'->'maximum'). Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-15selftests: tc-testing: fix tunnel_key failure if dst_port is unspecifiedDavide Caratti1-1/+1
After commit 1c25324caf82 ("net/sched: act_tunnel_key: Don't dump dst port if it wasn't set"), act_tunnel_key doesn't dump anymore the destination port, unless it was explicitly configured. This caused systematic failures in the following TDC test case: 7a88 - Add tunnel_key action with cookie parameter Avoid matching zero values of TCA_TUNNEL_KEY_ENC_DST_PORT to let the test pass again. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-15selftests: tc-testing: drop test on missing tunnel key idDavide Caratti1-29/+0
After merge of commit 80ef0f22ceda ("net/sched: act_tunnel_key: Allow key-less tunnels"), act_tunnel_key does not reject anymore requests to install 'set' rules where the key id is missing. Therefore, drop the following TDC testcase: ba4e - Add tunnel_key set action with missing mandatory id parameter because it's going to become a systematic fail as soon as userspace iproute2 will start supporting key-less tunnels. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-16tools/bpf: properly account for libbfd variationsStanislav Fomichev1-1/+8
On some platforms, in order to link against libbfd, we need to link against liberty and even possibly libz. Account for that in the bpftool Makefile. We now have proper feature detection for each case, so handle each one separately. See recent commit 14541b1e7e72 ("perf build: Don't unconditionally link the libbfd feature test to -liberty and -lz") where I fixed feature detection. v2 (addressed Jakub's nits): * better syntax for 'else ifeq' * no space between ifeq args v3: * use LIBS, not EXTLIBS for -DHAVE_LIBBFD_SUPPORT Fixes: 29a9c10e4110 ("bpftool: make libbfd optional") Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-15selftests/txtimestamp: Fix an equals vs assign bugDan Carpenter1-1/+1
This should be == instead of =. Fixes: b52354aa068e ("selftests: expand txtimestamp with ipv6 dgram + raw and pf_packet") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-15bpf: libbpf: retry loading program on EAGAINLorenz Bauer1-4/+15
Commit c3494801cd17 ("bpf: check pending signals while verifying programs") makes it possible for the BPF_PROG_LOAD to fail with EAGAIN. Retry unconditionally in this case. Fixes: c3494801cd17 ("bpf: check pending signals while verifying programs") Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-15selftests/bpf: install with_tunnels.sh for test_flow_dissector.shStanislav Fomichev1-0/+1
test_flow_dissector.sh depends on both with_addr.sh and with_tunnels.sh However, we install only with_addr.sh. Add with_tunnels.sh to TEST_PROGS_EXTENDED to make sure it gets installed as well. Tested with: make TARGETS=bpf install INSTALL_PATH=$PWD/x Fixes: ef4ab8447aa26 ("selftests: bpf: install script with_addr.sh") Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds22-42/+357
Pull networking fixes from David Miller: 1) Fix regression in multi-SKB responses to RTM_GETADDR, from Arthur Gautier. 2) Fix ipv6 frag parsing in openvswitch, from Yi-Hung Wei. 3) Unbounded recursion in ipv4 and ipv6 GUE tunnels, from Stefano Brivio. 4) Use after free in hns driver, from Yonglong Liu. 5) icmp6_send() needs to handle the case of NULL skb, from Eric Dumazet. 6) Missing rcu read lock in __inet6_bind() when operating on mapped addresses, from David Ahern. 7) Memory leak in tipc-nl_compat_publ_dump(), from Gustavo A. R. Silva. 8) Fix PHY vs r8169 module loading ordering issues, from Heiner Kallweit. 9) Fix bridge vlan memory leak, from Ido Schimmel. 10) Dev refcount leak in AF_PACKET, from Jason Gunthorpe. 11) Infoleak in ipv6_local_error(), flow label isn't completely initialized. From Eric Dumazet. 12) Handle mv88e6390 errata, from Andrew Lunn. 13) Making vhost/vsock CID hashing consistent, from Zha Bin. 14) Fix lack of UMH cleanup when it unexpectedly exits, from Taehee Yoo. 15) Bridge forwarding must clear skb->tstamp, from Paolo Abeni. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (87 commits) bnxt_en: Fix context memory allocation. bnxt_en: Fix ring checking logic on 57500 chips. mISDN: hfcsusb: Use struct_size() in kzalloc() net: clear skb->tstamp in bridge forwarding path net: bpfilter: disallow to remove bpfilter module while being used net: bpfilter: restart bpfilter_umh when error occurred net: bpfilter: use cleanup callback to release umh_info umh: add exit routine for UMH process isdn: i4l: isdn_tty: Fix some concurrency double-free bugs vhost/vsock: fix vhost vsock cid hashing inconsistent net: stmmac: Prevent RX starvation in stmmac_napi_poll() net: stmmac: Fix the logic of checking if RX Watchdog must be enabled net: stmmac: Check if CBS is supported before configuring net: stmmac: dwxgmac2: Only clear interrupts that are active net: stmmac: Fix PCI module removal leak tools/bpf: fix bpftool map dump with bitfields tools/bpf: test btf bitfield with >=256 struct member offset bpf: fix bpffs bitfield pretty print net: ethernet: mediatek: fix warning in phy_start_aneg tcp: change txhash on SYN-data timeout ...
2019-01-11Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds43-697/+797
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf tooling updates from Ingo Molnar: "Tooling changes only: fixes and a few stray improvements. Most of the diffstat is dominated by a PowerPC related fix of system call trace output beautification that allows us to (again) use the UAPI header version and sync up with the kernel's version of PowerPC system call names in the arch/powerpc/kernel/syscalls/syscall.tbl header" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) tools headers powerpc: Remove unistd.h perf powerpc: Rework syscall table generation perf symbols: Add 'arch_cpu_idle' to the list of kernel idle symbols tools include uapi: Sync linux/if_link.h copy with the kernel sources tools include uapi: Sync linux/vhost.h with the kernel sources tools include uapi: Sync linux/fs.h copy with the kernel sources perf beauty: Switch from using uapi/linux/fs.h to uapi/linux/mount.h tools include uapi: Grab a copy of linux/mount.h perf top: Lift restriction on using callchains without "sym" in --sort tools lib traceevent: Remove tep_data_event_from_type() API tools lib traceevent: Rename tep_is_file_bigendian() to tep_file_bigendian() tools lib traceevent: Changed return logic of tep_register_event_handler() API tools lib traceevent: Changed return logic of trace_seq_printf() and trace_seq_vprintf() APIs tools lib traceevent: Rename struct cmdline to struct tep_cmdline tools lib traceevent: Initialize host_bigendian at tep_handle allocation tools lib traceevent: Introduce new libtracevent API: tep_override_comm() perf tests: Add a test for the ARM 32-bit [vectors] page perf tools: Make find_vdso_map() more modular perf trace: Fix alignment for [continued] lines perf trace: Fix ')' placement in "interrupted" syscall lines ...
2019-01-11tools/bpf: fix bpftool map dump with bitfieldsYonghong Song1-6/+7
Commit 8772c8bc093b ("tools: bpftool: support pretty print with kind_flag set") added bpftool map dump with kind_flag support. When bitfield_size can be retrieved directly from btf_member, function btf_dumper_bitfield() is called to dump the bitfield. The implementation passed the wrong parameter "bit_offset" to the function. The excepted value is the bit_offset within a byte while the passed-in value is the struct member offset. This commit fixed the bug with passing correct "bit_offset" with adjusted data pointer. Fixes: 8772c8bc093b ("tools: bpftool: support pretty print with kind_flag set") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-11tools/bpf: test btf bitfield with >=256 struct member offsetYonghong Song1-8/+21
This patch modified test_btf pretty print test to cover the bitfield with struct member equal to or greater 256. Without the previous kernel patch fix, the modified test will fail: $ test_btf -p ...... BTF pretty print array(#1)......unexpected pprint output expected: 0: {0,0,0,0x3,0x0,0x3,{0|[0,0,0,0,0,0,0,0]},ENUM_ZERO,4,0x1} read: 0: {0,0,0,0x3,0x0,0x3,{0|[0,0,0,0,0,0,0,0]},ENUM_ZERO,4,0x0} BTF pretty print array(#2)......unexpected pprint output expected: 0: {0,0,0,0x3,0x0,0x3,{0|[0,0,0,0,0,0,0,0]},ENUM_ZERO,4,0x1} read: 0: {0,0,0,0x3,0x0,0x3,{0|[0,0,0,0,0,0,0,0]},ENUM_ZERO,4,0x0} PASS:6 SKIP:0 FAIL:2 With the kernel fix, the modified test will succeed: $ test_btf -p ...... BTF pretty print array(#1)......OK BTF pretty print array(#2)......OK PASS:8 SKIP:0 FAIL:0 Fixes: 9d5f9f701b18 ("bpf: btf: fix struct/union/fwd types with kind_flag") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-10Merge tag 'riscv-for-linus-4.21-rc2-v2' of ↵Linus Torvalds2-0/+27
git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Pull RISC-V updates from Palmer Dabbelt: "This tag contains a handful of updates that slipped through the cracks during the merge window due to the holidays. The fixes are mostly independent, with the exception of one larger audit-related branch. Core RISC-V updates: - The BSS has been moved, which shrinks flat images. - A fix to test-bpf so it compiles on RV64I-based systems. - A fix to respect the kernel commandline when there is no device tree. - A fix to prevent CPUs from trying to put themselves to sleep when bringing down the system. - Support for MODULE_SECTIONS on RV32I-based systems. - [new in v2] The addition of an SBI earlycon driver. This is definately a new feature, but I'd like to include it now because I dropped this patch when submitting the merge window PR that removed our EARLY_PRINTK support. RISC-V audit updates: - The addition of NR_syscalls into unistd.h, which is necessary for CONFIG_FTRACE_SYSCALLS. - The definition of CREATE_TRACE_POINTS so __tracepoint_sys_{enter,exit} get defined. - A fix for trace_sys_exit() so we can enable HAVE_SYSCALL_TRACEPOINTS As usual, I've tested this by booting a Fedora-based image on a recent QEMU (this time just whatever I had lying around). * tag 'riscv-for-linus-4.21-rc2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: tty/serial: Add RISC-V SBI earlycon support riscv: add HAVE_SYSCALL_TRACEPOINTS to Kconfig riscv: fix trace_sys_exit hook riscv: define CREATE_TRACE_POINTS in ptrace.c riscv: define NR_syscalls in unistd.h riscv: audit: add audit hook in do_syscall_trace_enter/exit() riscv: add audit support RISC-V: Support MODULE_SECTIONS mechanism on RV32 MAINTAINERS: SiFive drivers: add myself as a SiFive driver maintainer MAINTAINERS: SiFive drivers: change the git tree to a SiFive git tree riscv: don't stop itself in smp_send_stop arch: riscv: support kernel command line forcing when no DTB passed tools uapi: fix RISC-V 64-bit support RISC-V: Make BSS section as the last section in vmlinux.lds.S
2019-01-10selftests: bpf: install files tcp_(server|client)*.pyAnders Roxell1-1/+3
When test_tcpbpf_user runs it complains that it can't find files tcp_server.py and tcp_client.py. Rework so that tcp_server.py and tcp_client.py gets installed, added them to the variable TEST_PROGS_EXTENDED. Fixes: d6d4f60c3a09 ("bpf: add selftest for tcpbpf") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-10selftests/bpf: add missing executables to .gitignoreStanislav Fomichev2-0/+2
We build test_libbpf with CXX to make sure linking against C++ works. $ make -s -C tools/lib/bpf $ git status -sb ? tools/lib/bpf/test_libbpf $ make -s -C tools/testing/selftests/bpf $ git status -sb ? tools/lib/bpf/test_libbpf ? tools/testing/selftests/bpf/test_libbpf Fixes: 8c4905b995c6 ("libbpf: make sure bpf headers are c++ include-able") Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-10tools headers powerpc: Remove unistd.hRavi Bangoria2-405/+0
We use syscall.tbl to generate system call table on powerpc. The unistd.h copy is no longer required now. Remove it. Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Namhyung Kim <namhyung@kernel.org> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20190110094936.3132-2-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-10perf powerpc: Rework syscall table generationRavi Bangoria3-14/+450
Commit aff850393200 ("powerpc: add system call table generation support") changed how systemcall table is generated for powerpc. Incorporate these changes into perf as well. Committer testing: $ podman run --entrypoint=/bin/sh --privileged -v /home/acme/git:/git --rm -ti docker.io/acmel/linux-perf-tools-build-ubuntu:18.04-x-powerpc64 perfbuilder@d7a7af166a80:/git/perf$ head -2 /etc/os-release NAME="Ubuntu" VERSION="18.04.1 LTS (Bionic Beaver)" perfbuilder@d7a7af166a80:/git/perf$ perfbuilder@d7a7af166a80:/git/perf$ make ARCH=powerpc CROSS_COMPILE=powerpc64-linux-gnu- EXTRA_CFLAGS= -C /git/linux/tools/perf O=/tmp/build/perf make: Entering directory '/git/linux/tools/perf' BUILD: Doing 'make -j8' parallel build HOSTCC /tmp/build/perf/fixdep.o HOSTLD /tmp/build/perf/fixdep-in.o LINK /tmp/build/perf/fixdep Warning: Kernel ABI header at 'tools/include/uapi/linux/mman.h' differs from latest version at 'include/uapi/linux/mman.h' diff -u tools/include/uapi/linux/mman.h include/uapi/linux/mman.h sh: 1: command: Illegal option -c Auto-detecting system features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] ... gtk2: [ OFF ] ... libaudit: [ OFF ] ... libbfd: [ OFF ] ... libelf: [ on ] ... libnuma: [ OFF ] ... numa_num_possible_cpus: [ OFF ] ... libperl: [ OFF ] ... libpython: [ OFF ] ... libslang: [ OFF ] ... libcrypto: [ OFF ] ... libunwind: [ OFF ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... lzma: [ OFF ] ... get_cpuid: [ OFF ] ... bpf: [ on ] Makefile.config:445: No sys/sdt.h found, no SDT events are defined, please install systemtap-sdt-devel or systemtap-sdt-dev Makefile.config:491: No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR Makefile.config:583: No libcrypto.h found, disables jitted code injection, please install libssl-devel or libssl-dev Makefile.config:598: slang not found, disables TUI support. Please install slang-devel, libslang-dev or libslang2-dev Makefile.config:612: GTK2 not found, disables GTK2 support. Please install gtk2-devel or libgtk2.0-dev Makefile.config:639: Missing perl devel files. Disabling perl scripting support, please install perl-ExtUtils-Embed/libperl-dev Makefile.config:666: No python interpreter was found: disables Python support - please install python-devel/python-dev Makefile.config:721: No bfd.h/libbfd found, please install binutils-dev[el]/zlib-static/libiberty-dev to gain symbol demangling Makefile.config:750: No liblzma found, disables xz kernel module decompression, please install xz-devel/liblzma-dev Makefile.config:763: No numa.h found, disables 'perf bench numa mem' benchmark, please install numactl-devel/libnuma-devel/libnuma-dev Makefile.config:814: No libbabeltrace found, disables 'perf data' CTF format support, please install libbabeltrace-dev[el]/libbabeltrace-ctf-dev Makefile.config:840: No alternatives command found, you need to set JDIR= to point to the root of your Java directory GEN /tmp/build/perf/common-cmds.h <SNIP> CC /tmp/build/perf/util/syscalltbl.o <SNIP> LD /tmp/build/perf/libperf-in.o AR /tmp/build/perf/libperf.a LINK /tmp/build/perf/perf make: Leaving directory '/git/linux/tools/perf' perfbuilder@d7a7af166a80:/git/perf$ head /tmp/build/perf/arch/powerpc/include/generated/asm/syscalls_64.c static const char *syscalltbl_powerpc_64[] = { [0] = "restart_syscall", [1] = "exit", [2] = "fork", [3] = "read", [4] = "write", [5] = "open", [6] = "close", [7] = "waitpid", [8] = "creat", perfbuilder@d7a7af166a80:/git/perf$ tail /tmp/build/perf/arch/powerpc/include/generated/asm/syscalls_64.c [381] = "pwritev2", [382] = "kexec_file_load", [383] = "statx", [384] = "pkey_alloc", [385] = "pkey_free", [386] = "pkey_mprotect", [387] = "rseq", [388] = "io_pgetevents", }; #define SYSCALLTBL_POWERPC_64_MAX_ID 388 perfbuilder@d7a7af166a80:/git/perf$ head /tmp/build/perf/arch/powerpc/include/generated/asm/syscalls_32.c static const char *syscalltbl_powerpc_32[] = { [0] = "restart_syscall", [1] = "exit", [2] = "fork", [3] = "read", [4] = "write", [5] = "open", [6] = "close", [7] = "waitpid", [8] = "creat", perfbuilder@d7a7af166a80:/git/perf$ tail /tmp/build/perf/arch/powerpc/include/generated/asm/syscalls_32.c [381] = "pwritev2", [382] = "kexec_file_load", [383] = "statx", [384] = "pkey_alloc", [385] = "pkey_free", [386] = "pkey_mprotect", [387] = "rseq", [388] = "io_pgetevents", }; #define SYSCALLTBL_POWERPC_32_MAX_ID 388 perfbuilder@d7a7af166a80:/git/perf$ Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Namhyung Kim <namhyung@kernel.org> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20190110094936.3132-1-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-09perf symbols: Add 'arch_cpu_idle' to the list of kernel idle symbolsArnaldo Carvalho de Melo1-0/+1
When testing 'perf top' on a armhf system (32-bit, Orange Pi Zero), I noticed that 'arch_cpu_idle' dominated, add it to the list of idle symbols, so that we can see what is that being done when not idle. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-4q2b5g4p2hrstrhp9t2mrlho@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-09tools include uapi: Sync linux/if_link.h copy with the kernel sourcesArnaldo Carvalho de Melo1-0/+19
To pick the changes from: a428afe82f98 ("net: bridge: add support for user-controlled bool options") a025fb5f49ad ("geneve: Allow configuration of DF behaviour") b4d3069783bc ("vxlan: Allow configuration of DF behaviour") Silencing this tools/ build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/if_link.h' differs from latest version at 'include/uapi/linux/if_link.h' Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Cc: Stefano Brivio <sbrivio@redhat.com> Link: https://lkml.kernel.org/n/tip-wq410s2wuqv5k980bidw0ju8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-08tools/vm/page_owner: use page_owner_sort in the use exampleMiles Chen1-1/+3
The example in comment does not useable because the output binary is named "page_owner_sort", not "sort". Also add a reference to Documentation/vm/page_owner.rst Link: http://lkml.kernel.org/r/1546515361-8317-1-git-send-email-miles.chen@mediatek.com Signed-off-by: Miles Chen <miles.chen@mediatek.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-08selftests: forwarding: Add a test for VLAN deletionIdo Schimmel1-1/+14
Add a VLAN on a bridge port, delete it and make sure the PVID VLAN is not affected. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-08selftests: forwarding: Fix test for different devicesIdo Schimmel1-1/+1
When running the test on the Spectrum ASIC the generated packets are counted on the ingress filter and injected back to the pipeline because of the 'pass' action. The router block then drops the packets due to checksum error, as the test generates packets with zero checksum. When running the test on an emulator that is not as strict about checksum errors the test fails since packets are counted twice. Once by the emulated ASIC on its ingress filter and again by the kernel as the emulator does not perform checksum validation and allows the packets to be trapped by a matching host route. Fix this by changing the action to 'drop', which will prevent the packet from continuing further in the pipeline to the router block. For veth pairs this change is essentially a NOP given packets are only processed once (by the kernel). Fixes: a0b61f3d8ebf ("selftests: forwarding: vxlan_bridge_1d: Add an ECN decap test") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-08selftests: mlxsw: Add a test case for VLAN addition error flowIdo Schimmel1-0/+18
Add a test case for the issue fixed by previous commit. In case the offloading of an unsupported VxLAN tunnel was triggered by adding the mapped VLAN to a local port, then error should be returned to the user. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-08tools include uapi: Sync linux/vhost.h with the kernel sourcesArnaldo Carvalho de Melo1-111/+2
To get the changes in: 4b86713236e4 ("vhost: split structs into a separate header file") Silencing this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h' diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h Those didn't touch things used in tools, i.e. the following continues working: $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh static const char *vhost_virtio_ioctl_cmds[] = { [0x00] = "SET_FEATURES", [0x01] = "SET_OWNER", [0x02] = "RESET_OWNER", [0x03] = "SET_MEM_TABLE", [0x04] = "SET_LOG_BASE", [0x07] = "SET_LOG_FD", [0x10] = "SET_VRING_NUM", [0x11] = "SET_VRING_ADDR", [0x12] = "SET_VRING_BASE", [0x13] = "SET_VRING_ENDIAN", [0x14] = "GET_VRING_ENDIAN", [0x20] = "SET_VRING_KICK", [0x21] = "SET_VRING_CALL", [0x22] = "SET_VRING_ERR", [0x23] = "SET_VRING_BUSYLOOP_TIMEOUT", [0x24] = "GET_VRING_BUSYLOOP_TIMEOUT", [0x25] = "SET_BACKEND_FEATURES", [0x30] = "NET_SET_BACKEND", [0x40] = "SCSI_SET_ENDPOINT", [0x41] = "SCSI_CLEAR_ENDPOINT", [0x42] = "SCSI_GET_ABI_VERSION", [0x43] = "SCSI_SET_EVENTS_MISSED", [0x44] = "SCSI_GET_EVENTS_MISSED", [0x60] = "VSOCK_SET_GUEST_CID", [0x61] = "VSOCK_SET_RUNNING", }; static const char *vhost_virtio_ioctl_read_cmds[] = { [0x00] = "GET_FEATURES", [0x12] = "GET_VRING_BASE", [0x26] = "GET_BACKEND_FEATURES", }; $ At some point in the eBPFication of perf, using something like: # perf trace -e ioctl(cmd=VHOST_VRING*) Will setup a BPF filter right at the raw_syscalls:sys_enter tracepoint, i.e. filtering at the origin. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-g28usrt7l59lwq3wuh8vzbig@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-08tools include uapi: Sync linux/fs.h copy with the kernel sourcesArnaldo Carvalho de Melo1-52/+8
To get the changes in: e262e32d6bde ("vfs: Suppress MS_* flag defs within the kernel unless explicitly enabled") That made the mount flags string table generator to switch to using mount.h instead. This silences the following perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/fs.h' differs from latest version at 'include/uapi/linux/fs.h' diff -u tools/include/uapi/linux/fs.h include/uapi/linux/fs.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Howells <dhowells@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-mosz81pa6iwxko4p2owbm3ss@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-08perf beauty: Switch from using uapi/linux/fs.h to uapi/linux/mount.hArnaldo Carvalho de Melo1-2/+2
As now we'll update our fs.h copy and what tools/perf/trace/beauty/mount_flags.sh needs just got moved to mount.h, use that instead. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Howells <dhowells@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-ls19h376xukeouxrw9dswkcn@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-08tools include uapi: Grab a copy of linux/mount.hArnaldo Carvalho de Melo2-0/+59
We were using a copy of uapi/linux/fs.h to create the mount syscall 'flags' string table to use in 'perf trace', to convert from the number obtained via the raw_syscalls:sys_enter into a string, using tools/perf/trace/beauty/mount_flags.sh, but in e262e32d6bde ("vfs: Suppress MS_* flag defs within the kernel unless explicitly enabled") those defines got moved to linux/mount.h, so grab a copy of mount.h too. Keep the uapi/linux/fs.h as we'll use it for the SEEK_ constants. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Howells <dhowells@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-i2ricmpwpdrpukfq3298jr1z@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-08perf top: Lift restriction on using callchains without "sym" in --sortArnaldo Carvalho de Melo1-6/+1
This restriction is not present in 'perf report' and since 'perf top' uses the same hists browser, remove it from it as well. With this we create per event buckets with callchain trees, so that # perf top --sort dso -g --no-children Bucketizes samples by DSO and below it shows the callchains leading to functions in this DSO. Try also: # perf top -e sched:*switch -g --no-children To see the callchains leading to sched switches, pressing 'E' to expand all one can quickly see the most common scheduler switches and what leads to them, for instance, calls to IO, futexes, etc. Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: https://lkml.kernel.org/r/20190107140854.GA28965@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-08tools lib traceevent: Remove tep_data_event_from_type() APITzvetomir Stoyanov2-13/+0
In order to make libtraceevent into a proper library, its API should be straightforward. After discussion with Steven Rostedt, we decided to remove the tep_data_event_from_type() API and to replace it with tep_find_event(), as it does the same. Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20181201040852.913841066@goodmis.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-08tools lib traceevent: Rename tep_is_file_bigendian() to tep_file_bigendian()Tzvetomir Stoyanov3-4/+4
In order to make libtraceevent into a proper library, its API should be straightforward. After a discussion with Steven Rostedt, we decided to rename a few APIs, to have more intuitive names. This patch renames tep_is_file_bigendian() to tep_file_bigendian(). Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20181201040852.767549746@goodmis.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-08tools lib traceevent: Changed return logic of tep_register_event_handler() APITzvetomir Stoyanov2-2/+13
In order to make libtraceevent into a proper library, its API should be straightforward. The tep_register_event_handler() functions returns -1 in case it successfully registers the new event handler. Such return code is used by the other library APIs in case of an error. To unify the return logic of tep_register_event_handler() with the other APIs, this patch introduces enum tep_reg_handler, which is used by this function as return value, to handle all possible successful return cases. Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20181201040852.628034497@goodmis.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-08tools lib traceevent: Changed return logic of trace_seq_printf() and ↵Tzvetomir Stoyanov1-5/+12
trace_seq_vprintf() APIs In order to make libtraceevent into a proper library, its API should be straightforward. The trace_seq_printf() and trace_seq_vprintf() APIs have inconsistent returned values with the other trace_seq_* APIs. This path changes the return logic of trace_seq_printf() and trace_seq_vprintf() to return the number of printed characters, as the other trace_seq_* related APIs. Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20181201040852.485792891@goodmis.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-08tools lib traceevent: Rename struct cmdline to struct tep_cmdlineTzvetomir Stoyanov3-24/+24
In order to make libtraceevent a proper library, variables, data structures and functions should have a unique prefix to prevent name space conflicts. That prefix will be "tep_". This patch renames 'struct cmdline' to 'struct tep_cmdline'. Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20181201040852.358871851@goodmis.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-08tools lib traceevent: Initialize host_bigendian at tep_handle allocationTzvetomir Stoyanov1-1/+3
This patch initializes the host_bigendian member of the tep_handle structure with the byte order of the current host, when this handler is created - in tep_alloc() API. We need this in order to remove the tep_set_host_bigendian() API. Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20181201040852.216292134@goodmis.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-08tools lib traceevent: Introduce new libtracevent API: tep_override_comm()Tzvetomir Stoyanov2-15/+55
This patch adds a new API of tracevent library: tep_override_comm() It registers a pid / command mapping. If a mapping with the same pid already exists, the entry is updated with the new command. Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20181130154648.038915912@goodmis.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-08perf tests: Add a test for the ARM 32-bit [vectors] pageFlorian Fainelli4-0/+34
perf on ARM requires CONFIG_KUSER_HELPERS to be turned on to allow some independance with respect to the ARM CPU being used. Add a test which tries to locate the [vectors] page, created when CONFIG_KUSER_HELPERS is turned on to help asses the system's health. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Kim Phillips <kim.phillips@arm.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Richter <tmricht@linux.ibm.com> Link: http://lkml.kernel.org/r/20181221034337.26663-3-f.fainelli@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-08perf tools: Make find_vdso_map() more modularFlorian Fainelli4-12/+11
In preparation for checking that the vectors page on the ARM architecture, refactor the find_vdso_map() function to accept finding an arbitrary string and create a dedicated helper function for that under util/find-map.c and update the filename to find-map.c and all references to it: perf-read-vdso.c and util/vdso.c. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Kim Phillips <kim.phillips@arm.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Richter <tmricht@linux.ibm.com> Link: http://lkml.kernel.org/r/20181221034337.26663-2-f.fainelli@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-08perf trace: Fix alignment for [continued] linesArnaldo Carvalho de Melo1-2/+3
We were not taking into account the "... [continued]" printed characters, fix it. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-qt20y0acmf8k0bzisce8kw95@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-08perf trace: Fix ')' placement in "interrupted" syscall linesArnaldo Carvalho de Melo1-2/+8
When we get the sys_enter for a syscall we check if the last one is still waiting for its matching sys_exit, if so we print this: 468.753 ( ): firefox/32382 poll(ufds: 0x7f3988d3dd00, nfds: 7, timeout_msecs: 4294967295) ... 449.575 ( 0.004 ms): Softwar~cThrea/32434 futex(uaddr: 0x7f39a18a9b70, op: WAKE|PRIVATE_FLAG, val: 1) = 0 At some point we'll get that poll sys_exit event and will print a "[continued]" line. While making the sizing of the alignment after the syscall arg list and its result configurable, so that we can mimic strace, which uses a smaller alingment by default, a bug was introduced where the closing parens appeared before the syscall name and its arg list, fix it. Fixes: 4b8a240ed5e0 ("perf trace: Add alignment spaces after the closing parens") Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-oi45i54s59h1w1kmgpzrfuum@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-08Merge tag 'perf-core-for-mingo-4.21-20190104' of ↵Ingo Molnar17-28/+89
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: perf annotate: Ivan Krylov: - Pass filename to objdump via execl, fixing usage with filenames with special characters. perf report: Jin Yao: Fix wrong iteration count in --branch-history perf stat: Jin Yao: - Fix endless wait for child process perf test: Arnaldo Carvalho de Melo: - Use a fallback to get the pathname in vfs_getname in tools build: Jiri Olsa: - Allow overriding CFLAGS assignments. Misc: Arnaldo Carvalho de Melo: - Syncronize UAPI headers Mattias Jacobsson: - Remove redundant va_end() in strbuf_addv() Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-01-08powerpc/perf: Update perf_regs structure to include MMCRAMadhavan Srinivasan3-1/+4
On each sample, Monitor Mode Control Register A (MMCRA) content is saved in pt_regs. MMCRA does not have a entry as-is in the pt_regs but instead, MMCRA content is saved in the "dsisr" register of pt_regs. Patch adds another entry to the perf_regs structure to include the "MMCRA" printing which internally maps to the "dsisr" of pt_regs. It also check for the MMCRA availability in the platform and present value accordingly mpe: This was the 2nd patch in a series with commit 333804dc3b7a ("powerpc/perf: Update perf_regs structure to include SIER") but I accidentally only merged the 1st patch, so merge this one now. Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-01-07bpf, doc: add note for libbpf's stand-alone buildDaniel Borkmann1-0/+14
Given this came up couple of times, add a note to libbpf's readme about the semi-automated mirror for a stand-alone build which is officially managed by BPF folks. While at it, also explicitly state the libbpf license in the readme file. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-07selftests/bpf: fix incorrect users of create_and_get_cgroupStanislav Fomichev10-12/+12
We have some tests that assume create_and_get_cgroup returns -1 on error which is incorrect (it returns 0 on error). Since fd might be zero in general case, change create_and_get_cgroup to return -1 on error and fix the users that assume 0 on error. Fixes: f269099a7e7a ("tools/bpf: add a selftest for bpf_get_current_cgroup_id() helper") Fixes: 7d2c6cfc5411 ("bpf: use --cgroup in test_suite if supplied") v2: - instead of fixing the uses that assume -1 on error, convert the users that assume 0 on error (fd might be zero in general case) Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>