summaryrefslogtreecommitdiffstats
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2020-12-06Merge tag 'x86-urgent-2020-12-06' of ↵Linus Torvalds1-0/+15
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of fixes for x86: - Make the AMD L3 QoS code and data priorization enable/disable mechanism work correctly. The control bit was only set/cleared on one of the CPUs in a L3 domain, but it has to be modified on all CPUs in the domain. The initial documentation was not clear about this, but the updated one from Oct 2020 spells it out. - Fix an off by one in the UV platform detection code which causes the UV hubs to be identified wrongly. The chip revisions start at 1 not at 0. - Fix a long standing bug in the evaluation of prefixes in the uprobes code which fails to handle repeated prefixes properly. The aggregate size of the prefixes can be larger than the bytes array but the code blindly iterated over the aggregate size beyond the array boundary. Add a macro to handle this case properly and use it at the affected places" * tag 'x86-urgent-2020-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sev-es: Use new for_each_insn_prefix() macro to loop over prefixes bytes x86/insn-eval: Use new for_each_insn_prefix() macro to loop over prefixes bytes x86/uprobes: Do not use prefixes.nbytes when looping over prefixes.bytes x86/platform/uv: Fix UV4 hub revision adjustment x86/resctrl: Fix AMD L3 QOS CDP enable/disable
2020-12-06userfaultfd: selftests: fix SIGSEGV if huge mmap failsAxel Rasmussen1-9/+16
The error handling in hugetlb_allocate_area() was incorrect for the hugetlb_shared test case. Previously the behavior was: - mmap a hugetlb area - If this fails, set the pointer to NULL, and carry on - mmap an alias of the same hugetlb fd - If this fails, munmap the original area If the original mmap failed, it's likely the second one did too. If both failed, we'd blindly try to munmap a NULL pointer, causing a SIGSEGV. Instead, "goto fail" so we return before trying to mmap the alias. This issue can be hit "in real life" by forgetting to set /proc/sys/vm/nr_hugepages (leaving it at 0), and then trying to run the hugetlb_shared test. Another small improvement is, when the original mmap fails, don't just print "it failed": perror(), so we can see *why*. :) Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Peter Xu <peterx@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Alan Gilbert <dgilbert@redhat.com> Link: https://lkml.kernel.org/r/20201204203443.2714693-1-axelrasmussen@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-06tools/testing/selftests/vm: fix build errorXingxing Su1-0/+4
Only x86 and PowerPC implement the pkey-xxx.h, and an error was reported when compiling protection_keys.c. Add a Arch judgment to compile "protection_keys" in the Makefile. If other arch implement this, add the arch name to the Makefile. eg: ifneq (,$(findstring $(ARCH),powerpc mips ... )) Following build errors: pkey-helpers.h:93:2: error: #error Architecture not supported #error Architecture not supported pkey-helpers.h:96:20: error: `PKEY_DISABLE_ACCESS' undeclared #define PKEY_MASK (PKEY_DISABLE_ACCESS | PKEY_DISABLE_WRITE) ^ protection_keys.c:218:45: error: `PKEY_DISABLE_WRITE' undeclared pkey_assert(flags & (PKEY_DISABLE_ACCESS | PKEY_DISABLE_WRITE)); ^ Signed-off-by: Xingxing Su <suxingxing@loongson.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Sandipan Das <sandipan@linux.ibm.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Brian Geffon <bgeffon@google.com> Cc: Mina Almasry <almasrymina@google.com> Link: https://lkml.kernel.org/r/1606826876-30656-1-git-send-email-suxingxing@loongson.cn Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-06x86/uprobes: Do not use prefixes.nbytes when looping over prefixes.bytesMasami Hiramatsu1-0/+15
Since insn.prefixes.nbytes can be bigger than the size of insn.prefixes.bytes[] when a prefix is repeated, the proper check must be insn.prefixes.bytes[i] != 0 and i < 4 instead of using insn.prefixes.nbytes. Introduce a for_each_insn_prefix() macro for this purpose. Debugged by Kees Cook <keescook@chromium.org>. [ bp: Massage commit message, sync with the respective header in tools/ and drop "we". ] Fixes: 2b1444983508 ("uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints") Reported-by: syzbot+9b64b619f10f19d19a7c@syzkaller.appspotmail.com Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/160697103739.3146288.7437620795200799020.stgit@devnote2
2020-12-03Merge tag 'net-5.10-rc7' of ↵Linus Torvalds2-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.10-rc7, including fixes from bpf, netfilter, wireless drivers, wireless mesh and can. Current release - regressions: - mt76: usb: fix crash on device removal Current release - always broken: - xsk: Fix umem cleanup from wrong context in socket destruct Previous release - regressions: - net: ip6_gre: set dev->hard_header_len when using header_ops - ipv4: Fix TOS mask in inet_rtm_getroute() - net, xsk: Avoid taking multiple skbuff references Previous release - always broken: - net/x25: prevent a couple of overflows - netfilter: ipset: prevent uninit-value in hash_ip6_add - geneve: pull IP header before ECN decapsulation - mpls: ensure LSE is pullable in TC and openvswitch paths - vxlan: respect needed_headroom of lower device - batman-adv: Consider fragmentation for needed packet headroom - can: drivers: don't count arbitration loss as an error - netfilter: bridge: reset skb->pkt_type after POST_ROUTING traversal - inet_ecn: Fix endianness of checksum update when setting ECT(1) - ibmvnic: fix various corner cases around reset handling - net/mlx5: fix rejecting unsupported Connect-X6DX SW steering - net/mlx5: Enforce HW TX csum offload with kTLS" * tag 'net-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits) net/mlx5: DR, Proper handling of unsupported Connect-X6DX SW steering net/mlx5e: kTLS, Enforce HW TX csum offload with kTLS net: mlx5e: fix fs_tcp.c build when IPV6 is not enabled net/mlx5: Fix wrong address reclaim when command interface is down net/sched: act_mpls: ensure LSE is pullable before reading it net: openvswitch: ensure LSE is pullable before reading it net: skbuff: ensure LSE is pullable before decrementing the MPLS ttl net: mvpp2: Fix error return code in mvpp2_open() chelsio/chtls: fix a double free in chtls_setkey() rtw88: debug: Fix uninitialized memory in debugfs code vxlan: fix error return code in __vxlan_dev_create() net: pasemi: fix error return code in pasemi_mac_open() cxgb3: fix error return code in t3_sge_alloc_qset() net/x25: prevent a couple of overflows dpaa_eth: copy timestamp fields to new skb in A-050385 workaround net: ip6_gre: set dev->hard_header_len when using header_ops mt76: usb: fix crash on device removal iwlwifi: pcie: add some missing entries for AX210 iwlwifi: pcie: invert values of NO_160 device config entries iwlwifi: pcie: add one missing entry for AX210 ...
2020-12-02Merge tag 'trace-v5.10-rc6-bootconfig' of ↵Linus Torvalds1-2/+5
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull bootconfig fixes from Steven Rostedt: "Have bootconfig size and checksum be little endian In case the bootconfig is created on one kind of endian machine, and then read on the other kind of endian kernel, the size and checksum will be incorrect. Instead, have both the size and checksum always be little endian and have the tool and the kernel convert it from little endian to or from the host endian" * tag 'trace-v5.10-rc6-bootconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: docs: bootconfig: Add the endianness of fields tools/bootconfig: Store size and checksum in footer as le32 bootconfig: Load size and checksum in the footer as le32
2020-12-01Merge tag 'trace-v5.10-rc6' of ↵Linus Torvalds2-42/+85
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: - Use correct timestamp variable for ring buffer write stamp update - Fix up before stamp and write stamp when crossing ring buffer sub buffers - Keep a zero delta in ring buffer in slow path if cmpxchg fails - Fix trace_printk static buffer for archs that care - Fix ftrace record accounting for ftrace ops with trampolines - Fix DYNAMIC_FTRACE_WITH_DIRECT_CALLS dependency - Remove WARN_ON in hwlat tracer that triggers on something that is OK - Make "my_tramp" trampoline in ftrace direct sample code global - Fixes in the bootconfig tool for better alignment management * tag 'trace-v5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ring-buffer: Always check to put back before stamp when crossing pages ftrace: Fix DYNAMIC_FTRACE_WITH_DIRECT_CALLS dependency ftrace: Fix updating FTRACE_FL_TRAMP tracing: Fix alignment of static buffer tracing: Remove WARN_ON in start_thread() samples/ftrace: Mark my_tramp[12]? global ring-buffer: Set the right timestamp in the slow path of __rb_reserve_next() ring-buffer: Update write stamp with the correct ts docs: bootconfig: Update file format on initrd image tools/bootconfig: Align the bootconfig applied initrd image size to 4 tools/bootconfig: Fix to check the write failure correctly tools/bootconfig: Fix errno reference after printf()
2020-11-30tools/bootconfig: Store size and checksum in footer as le32Masami Hiramatsu1-2/+5
Store the size and the checksum fields in the footer as le32 instead of u32. This will allow us to apply bootconfig to the cross build initrd without caring the endianness. Link: https://lkml.kernel.org/r/160583935332.547349.5897811300636587426.stgit@devnote2 Reported-by: Steven Rostedt <rostedt@goodmis.org> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-11-28selftests: tc-testing: enable CONFIG_NET_SCH_RED as a moduleDavide Caratti1-0/+1
a proper kernel configuration for running kselftest can be obtained with: $ yes | make kselftest-merge enable compile support for the 'red' qdisc: otherwise, tdc kselftest fail when trying to run tdc test items contained in red.json. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Link: https://lore.kernel.org/r/cfa23f2d4f672401e6cebca3a321dd1901a9ff07.1606416464.git.dcaratti@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-28Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski1-0/+1
Daniel Borkmann says: ==================== pull-request: bpf 2020-11-28 1) Do not reference the skb for xsk's generic TX side since when looped back into RX it might crash in generic XDP, from Björn Töpel. 2) Fix umem cleanup on a partially set up xsk socket when being destroyed, from Magnus Karlsson. 3) Fix an incorrect netdev reference count when failing xsk_bind() operation, from Marek Majtyka. 4) Fix bpftool to set an error code on failed calloc() in build_btf_type_table(), from Zhen Lei. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Add MAINTAINERS entry for BPF LSM bpftool: Fix error return value in build_btf_type_table net, xsk: Avoid taking multiple skbuff references xsk: Fix incorrect netdev reference count xsk: Fix umem cleanup bug at socket destruct MAINTAINERS: Update XDP and AF_XDP entries ==================== Link: https://lore.kernel.org/r/20201128005104.1205-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27perf probe: Change function definition check due to broken DWARFMasami Hiramatsu2-4/+19
Since some gcc generates a broken DWARF which lacks DW_AT_declaration attribute from the subprogram DIE of function prototype. (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=97060) So, in addition to the DW_AT_declaration check, we also check the subprogram DIE has DW_AT_inline or actual entry pc. Committer testing: # cat /etc/fedora-release Fedora release 33 (Thirty Three) # Before: # perf test vfs_getname 78: Use vfs_getname probe to get syscall args filenames : FAILED! 79: Check open filename arg using perf trace + vfs_getname : FAILED! 81: Add vfs_getname probe to get syscall args filenames : FAILED! # After: # perf test vfs_getname 78: Use vfs_getname probe to get syscall args filenames : Ok 79: Check open filename arg using perf trace + vfs_getname : Ok 81: Add vfs_getname probe to get syscall args filenames : Ok # Reported-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Link: http://lore.kernel.org/lkml/160645613571.2824037.7441351537890235895.stgit@devnote2 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-11-27perf probe: Fix to die_entrypc() returns error correctlyMasami Hiramatsu1-0/+8
Fix die_entrypc() to return error correctly if the DIE has no DW_AT_ranges attribute. Since dwarf_ranges() will treat the case as an empty ranges and return 0, we have to check it by ourselves. Fixes: 91e2f539eeda ("perf probe: Fix to show function entry line as probe-able") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Link: http://lore.kernel.org/lkml/160645612634.2824037.5284932731175079426.stgit@devnote2 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-11-27perf stat: Use proper cpu for shadow statsNamhyung Kim1-4/+1
Currently perf stat shows some metrics (like IPC) for defined events. But when no aggregation mode is used (-A option), it shows incorrect values since it used a value from a different cpu. Before: $ perf stat -aA -e cycles,instructions sleep 1 Performance counter stats for 'system wide': CPU0 116,057,380 cycles CPU1 86,084,722 cycles CPU2 99,423,125 cycles CPU3 98,272,994 cycles CPU0 53,369,217 instructions # 0.46 insn per cycle CPU1 33,378,058 instructions # 0.29 insn per cycle CPU2 58,150,086 instructions # 0.50 insn per cycle CPU3 40,029,703 instructions # 0.34 insn per cycle 1.001816971 seconds time elapsed So the IPC for CPU1 should be 0.38 (= 33,378,058 / 86,084,722) but it was 0.29 (= 33,378,058 / 116,057,380) and so on. After: $ perf stat -aA -e cycles,instructions sleep 1 Performance counter stats for 'system wide': CPU0 109,621,384 cycles CPU1 159,026,454 cycles CPU2 99,460,366 cycles CPU3 124,144,142 cycles CPU0 44,396,706 instructions # 0.41 insn per cycle CPU1 120,195,425 instructions # 0.76 insn per cycle CPU2 44,763,978 instructions # 0.45 insn per cycle CPU3 69,049,079 instructions # 0.56 insn per cycle 1.001910444 seconds time elapsed Fixes: 44d49a600259 ("perf stat: Support metrics in --per-core/socket mode") Reported-by: Sam Xi <xyzsam@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20201127041404.390276-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-11-27perf record: Synthesize cgroup events only if neededNamhyung Kim1-0/+3
It didn't check the tool->cgroup_events bit which is set when the --all-cgroups option is given. Without it, samples will not have cgroup info so no reason to synthesize. We can check the PERF_RECORD_CGROUP records after running perf record *WITHOUT* the --all-cgroups option: Before: $ perf report -D | grep CGROUP 0 0 0x8430 [0x38]: PERF_RECORD_CGROUP cgroup: 1 / CGROUP events: 1 CGROUP events: 0 CGROUP events: 0 After: $ perf report -D | grep CGROUP CGROUP events: 0 CGROUP events: 0 CGROUP events: 0 Committer testing: Before: # perf record -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 2.208 MB perf.data (10003 samples) ] # perf report -D | grep "CGROUP events" CGROUP events: 146 CGROUP events: 0 CGROUP events: 0 # After: # perf record -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 2.208 MB perf.data (10448 samples) ] # perf report -D | grep "CGROUP events" CGROUP events: 0 CGROUP events: 0 CGROUP events: 0 # With all-cgroups: # perf record --all-cgroups -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 2.374 MB perf.data (11526 samples) ] # perf report -D | grep "CGROUP events" CGROUP events: 146 CGROUP events: 0 CGROUP events: 0 # Fixes: 8fb4b67939e16 ("perf record: Add --all-cgroups option") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20201127054356.405481-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-11-27perf diff: Fix error return value in __cmd_diff()Zhen Lei1-1/+3
An appropriate return value should be set on the failed path. Fixes: 2a09a84c720b436a ("perf diff: Support hot streams comparison") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20201124103652.438-1-thunder.leizhen@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-11-27perf tools: Update copy of libbpf's hashmap.cArnaldo Carvalho de Melo1-6/+9
To pick the changes in: 7a078d2d18801bba ("libbpf, hashmap: Fix undefined behavior in hash_bits") That don't entail any changes in tools/perf. This addresses this perf build warning: Warning: Kernel ABI header at 'tools/perf/util/hashmap.h' differs from latest version at 'tools/lib/bpf/hashmap.h' diff -u tools/perf/util/hashmap.h tools/lib/bpf/hashmap.h Not a kernel ABI, its just that this uses the mechanism in place for checking kernel ABI files drift. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-11-24bpftool: Fix error return value in build_btf_type_tableZhen Lei1-0/+1
An appropriate return value should be set on the failed path. Fixes: 4d374ba0bf30 ("tools: bpftool: implement "bpftool btf show|list"") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20201124104100.491-1-thunder.leizhen@huawei.com
2020-11-21Merge tag 'seccomp-v5.10-rc5' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull seccomp fixes from Kees Cook: "This gets the seccomp selftests running again on powerpc and sh, and fixes an audit reporting oversight noticed in both seccomp and ptrace. - Fix typos in seccomp selftests on powerpc and sh (Kees Cook) - Fix PF_SUPERPRIV audit marking in seccomp and ptrace (Mickaël Salaün)" * tag 'seccomp-v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: selftests/seccomp: sh: Fix register names selftests/seccomp: powerpc: Fix typo in macro variable name seccomp: Set PF_SUPERPRIV when checking capability ptrace: Set PF_SUPERPRIV when checking capability
2020-11-20selftests/seccomp: sh: Fix register namesKees Cook1-2/+2
It looks like the seccomp selftests was never actually built for sh. This fixes it, though I don't have an environment to do a runtime test of it yet. Fixes: 0bb605c2c7f2b4b3 ("sh: Add SECCOMP_FILTER") Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://lore.kernel.org/lkml/a36d7b48-6598-1642-e403-0c77a86f416d@physik.fu-berlin.de Signed-off-by: Kees Cook <keescook@chromium.org>
2020-11-20selftests/seccomp: powerpc: Fix typo in macro variable nameKees Cook1-2/+2
A typo sneaked into the powerpc selftest. Fix the name so it builds again. Fixes: 46138329faea ("selftests/seccomp: powerpc: Fix seccomp return value testing") Acked-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/lkml/87y2ix2895.fsf@mpe.ellerman.id.au Signed-off-by: Kees Cook <keescook@chromium.org>
2020-11-19Merge tag 'net-5.10-rc5' of ↵Linus Torvalds10-20/+169
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.10-rc5, including fixes from the WiFi (mac80211), can and bpf (including the strncpy_from_user fix). Current release - regressions: - mac80211: fix memory leak of filtered powersave frames - mac80211: free sta in sta_info_insert_finish() on errors to avoid sleeping in atomic context - netlabel: fix an uninitialized variable warning added in -rc4 Previous release - regressions: - vsock: forward all packets to the host when no H2G is registered, un-breaking AWS Nitro Enclaves - net: Exempt multicast addresses from five-second neighbor lifetime requirement, decreasing the chances neighbor tables fill up - net/tls: fix corrupted data in recvmsg - qed: fix ILT configuration of SRC block - can: m_can: process interrupt only when not runtime suspended Previous release - always broken: - page_frag: Recover from memory pressure by not recycling pages allocating from the reserves - strncpy_from_user: Mask out bytes after NUL terminator - ip_tunnels: Set tunnel option flag only when tunnel metadata is present, always setting it confuses Open vSwitch - bpf, sockmap: - Fix partial copy_page_to_iter so progress can still be made - Fix socket memory accounting and obeying SO_RCVBUF - net: Have netpoll bring-up DSA management interface - net: bridge: add missing counters to ndo_get_stats64 callback - tcp: brr: only postpone PROBE_RTT if RTT is < current min_rtt - enetc: Workaround MDIO register access HW bug - net/ncsi: move netlink family registration to a subsystem init, instead of tying it to driver probe - net: ftgmac100: unregister NC-SI when removing driver to avoid crash - lan743x: - prevent interrupt storm on open - fix freeing skbs in the wrong context - net/mlx5e: Fix socket refcount leak on kTLS RX resync - net: dsa: mv88e6xxx: Avoid VLAN database corruption on 6097 - fix 21 unset return codes and other mistakes on error paths, mostly detected by the Hulk Robot" * tag 'net-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (115 commits) fail_function: Remove a redundant mutex unlock selftest/bpf: Test bpf_probe_read_user_str() strips trailing bytes after NUL lib/strncpy_from_user.c: Mask out bytes after NUL terminator. net/smc: fix direct access to ib_gid_addr->ndev in smc_ib_determine_gid() net/smc: fix matching of existing link groups ipv6: Remove dependency of ipv6_frag_thdr_truncated on ipv6 module libbpf: Fix VERSIONED_SYM_COUNT number parsing net/mlx4_core: Fix init_hca fields offset atm: nicstar: Unmap DMA on send error page_frag: Recover from memory pressure net: dsa: mv88e6xxx: Wait for EEPROM done after HW reset mlxsw: core: Use variable timeout for EMAD retries mlxsw: Fix firmware flashing net: Have netpoll bring-up DSA management interface atl1e: fix error return code in atl1e_probe() atl1c: fix error return code in atl1c_probe() ah6: fix error return code in ah6_input() net: usb: qmi_wwan: Set DTR quirk for MR400 can: m_can: process interrupt only when not runtime suspended can: flexcan: flexcan_chip_start(): fix erroneous flexcan_transceiver_enable() during bus-off recovery ...
2020-11-19Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds2-2/+3
Pull rdma fixes from Jason Gunthorpe: "The last two weeks have been quiet here, just the usual smattering of long standing bug fixes. A collection of error case bug fixes: - Improper nesting of spinlock types in cm - Missing error codes and kfree() - Ensure dma_virt_ops users have the right kconfig symbols to work properly - Compilation failure of tools/testing" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: tools/testing/scatterlist: Fix test to compile and run IB/hfi1: Fix error return code in hfi1_init_dd() RMDA/sw: Don't allow drivers using dma_virt_ops on highmem configs RDMA/pvrdma: Fix missing kfree() in pvrdma_register_device() RDMA/cm: Make the local_id_table xarray non-irq
2020-11-19Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski10-20/+169
Alexei Starovoitov says: ==================== 1) libbpf should not attempt to load unused subprogs, from Andrii. 2) Make strncpy_from_user() mask out bytes after NUL terminator, from Daniel. 3) Relax return code check for subprograms in the BPF verifier, from Dmitrii. 4) Fix several sockmap issues, from John. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: fail_function: Remove a redundant mutex unlock selftest/bpf: Test bpf_probe_read_user_str() strips trailing bytes after NUL lib/strncpy_from_user.c: Mask out bytes after NUL terminator. libbpf: Fix VERSIONED_SYM_COUNT number parsing bpf, sockmap: Avoid failures from skb_to_sgvec when skb has frag_list bpf, sockmap: Handle memory acct if skb_verdict prog redirects to self bpf, sockmap: Avoid returning unneeded EAGAIN when redirecting to self bpf, sockmap: Use truesize with sk_rmem_schedule() bpf, sockmap: Ensure SO_RCVBUF memory is observed on ingress redirect bpf, sockmap: Fix partial copy_page_to_iter so progress can still be made selftests/bpf: Fix error return code in run_getsockopt_test() bpf: Relax return code check for subprograms tools, bpftool: Add missing close before bpftool net attach exit MAINTAINERS/bpf: Update Andrii's entry. selftests/bpf: Fix unused attribute usage in subprogs_unused test bpf: Fix unsigned 'datasec_id' compared with zero in check_pseudo_btf_id bpf: Fix passing zero to PTR_ERR() in bpf_btf_printf_prepare libbpf: Don't attempt to load unused subprog as an entry-point BPF program ==================== Link: https://lore.kernel.org/r/20201119200721.288-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-19selftest/bpf: Test bpf_probe_read_user_str() strips trailing bytes after NULDaniel Xu2-0/+96
Previously, bpf_probe_read_user_str() could potentially overcopy the trailing bytes after the NUL due to how do_strncpy_from_user() does the copy in long-sized strides. The issue has been fixed in the previous commit. This commit adds a selftest that ensures we don't regress bpf_probe_read_user_str() again. Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/4d977508fab4ec5b7b574b85bdf8b398868b6ee9.1605642949.git.dxu@dxuuu.xyz
2020-11-19Merge tag 'powerpc-cve-2020-4788' of ↵Linus Torvalds7-67/+265
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Fixes for CVE-2020-4788. From Daniel's cover letter: IBM Power9 processors can speculatively operate on data in the L1 cache before it has been completely validated, via a way-prediction mechanism. It is not possible for an attacker to determine the contents of impermissible memory using this method, since these systems implement a combination of hardware and software security measures to prevent scenarios where protected data could be leaked. However these measures don't address the scenario where an attacker induces the operating system to speculatively execute instructions using data that the attacker controls. This can be used for example to speculatively bypass "kernel user access prevention" techniques, as discovered by Anthony Steinhauser of Google's Safeside Project. This is not an attack by itself, but there is a possibility it could be used in conjunction with side-channels or other weaknesses in the privileged code to construct an attack. This issue can be mitigated by flushing the L1 cache between privilege boundaries of concern. This patch series flushes the L1 cache on kernel entry (patch 2) and after the kernel performs any user accesses (patch 3). It also adds a self-test and performs some related cleanups" * tag 'powerpc-cve-2020-4788' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: rename pnv|pseries_setup_rfi_flush to _setup_security_mitigations selftests/powerpc: refactor entry and rfi_flush tests selftests/powerpc: entry flush test powerpc: Only include kup-radix.h for 64-bit Book3S powerpc/64s: flush L1D after user accesses powerpc/64s: flush L1D on kernel entry selftests/powerpc: rfi_flush: disable entry flush if present
2020-11-19libbpf: Fix VERSIONED_SYM_COUNT number parsingJiri Olsa1-0/+2
We remove "other info" from "readelf -s --wide" output when parsing GLOBAL_SYM_COUNT variable, which was added in [1]. But we don't do that for VERSIONED_SYM_COUNT and it's failing the check_abi target on powerpc Fedora 33. The extra "other info" wasn't problem for VERSIONED_SYM_COUNT parsing until commit [2] added awk in the pipe, which assumes that the last column is symbol, but it can be "other info". Adding "other info" removal for VERSIONED_SYM_COUNT the same way as we did for GLOBAL_SYM_COUNT parsing. [1] aa915931ac3e ("libbpf: Fix readelf output parsing for Fedora") [2] 746f534a4809 ("tools/libbpf: Avoid counting local symbols in ABI check") Fixes: 746f534a4809 ("tools/libbpf: Avoid counting local symbols in ABI check") Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201118211350.1493421-1-jolsa@kernel.org
2020-11-19tools/bootconfig: Align the bootconfig applied initrd image size to 4Masami Hiramatsu2-24/+39
Align the bootconfig applied initrd image size to 4. To fill the gap, the bootconfig command uses null characters in between the bootconfig data and the footer. This will expands the footer size but don't change the checksum. Thus the block image of the initrd file with bootconfig is as follows. [initrd][bootconfig][(pad)][size][csum]["#BOOTCONFIG\n"] Link: https://lkml.kernel.org/r/160576522046.320071.8550680670010950634.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-11-19tools/bootconfig: Fix to check the write failure correctlyMasami Hiramatsu1-4/+26
Fix to check the write(2) failure including partial write correctly and try to rollback the partial write, because if there is no BOOTCONFIG_MAGIC string, we can not remove it. Link: https://lkml.kernel.org/r/160576521135.320071.3883101436675969998.stgit@devnote2 Fixes: 85c46b78da58 ("bootconfig: Add bootconfig magic word for indicating bootconfig explicitly") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-11-19tools/bootconfig: Fix errno reference after printf()Masami Hiramatsu1-23/+29
Fix not to refer the errno variable as the result of previous libc functions after printf() because printf() can change the errno. Link: https://lkml.kernel.org/r/160576520243.320071.51093664672431249.stgit@devnote2 Fixes: 85c46b78da58 ("bootconfig: Add bootconfig magic word for indicating bootconfig explicitly") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-11-19selftests/powerpc: refactor entry and rfi_flush testsDaniel Axtens6-120/+96
For simplicity in backporting, the original entry_flush test contained a lot of duplicated code from the rfi_flush test. De-duplicate that code. Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2020-11-19selftests/powerpc: entry flush testDaniel Axtens3-1/+200
Add a test modelled on the RFI flush test which counts the number of L1D misses doing a simple syscall with the entry flush on and off. For simplicity of backporting, this test duplicates a lot of code from rfi_flush. We clean that up in the next patch. Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2020-11-19selftests/powerpc: rfi_flush: disable entry flush if presentRussell Currey1-6/+29
We are about to add an entry flush. The rfi (exit) flush test measures the number of L1D flushes over a syscall with the RFI flush enabled and disabled. But if the entry flush is also enabled, the effect of enabling and disabling the RFI flush is masked. If there is a debugfs entry for the entry flush, disable it during the RFI flush and restore it later. Reported-by: Spoorthy S <spoorts2@in.ibm.com> Signed-off-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2020-11-18Merge tag 'linux-kselftest-kunit-fixes-5.10-rc5' of ↵Linus Torvalds5-38/+64
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kunit fixes from Shuah Khan: "Several fixes to Kunit documentation and tools, and to not pollute the source directory. Also remove the incorrect kunit .gitattributes file" * tag 'linux-kselftest-kunit-fixes-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: fix display of failed expectations for strings kunit: tool: fix extra trailing \n in raw + parsed test output kunit: tool: print out stderr from make (like build warnings) KUnit: Docs: usage: wording fixes KUnit: Docs: style: fix some Kconfig example issues KUnit: Docs: fix a wording typo kunit: Do not pollute source directory with generated files (test.log) kunit: Do not pollute source directory with generated files (.kunitconfig) kunit: tool: fix pre-existing python type annotation errors kunit: Fix kunit.py parse subcommand (use null build_dir) kunit: tool: unmark test_data as binary blobs
2020-11-17tools/testing/scatterlist: Fix test to compile and runMaor Gottlieb2-2/+3
Add missing define of ALIGN_DOWN to make the test build and run. In addition, __sg_alloc_table_from_pages now support unaligned maximum segment, so adapt the test result accordingly. Fixes: 07da1223ec93 ("lib/scatterlist: Add support in dynamic allocation of SG table from pages") Link: https://lore.kernel.org/r/20201115120623.139113-1-leon@kernel.org Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-11-17Merge tag 'perf-tools-fixes-for-v5.10-2020-11-17' of ↵Linus Torvalds9-25/+34
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix file corruption due to event deletion in 'perf inject'. - Update arch/x86/lib/mem{cpy,set}_64.S copies used in 'perf bench mem memcpy', silencing perf build warning. - Avoid an msan warning in a copied stack in 'perf test'. - Correct tracepoint field name "flags" in ARM's CS-ETM hardware tracing 'perf test' entry. - Update branch sample pattern for cs-etm to cope with excluding guest in userspace counting. - Don't free "lock_seq_stat" if read_count isn't zero in 'perf lock'. * tag 'perf-tools-fixes-for-v5.10-2020-11-17' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf test: Avoid an msan warning in a copied stack. perf inject: Fix file corruption due to event deletion perf test: Update branch sample pattern for cs-etm perf test: Fix a typo in cs-etm testing tools arch: Update arch/x86/lib/mem{cpy,set}_64.S copies used in 'perf bench mem memcpy' perf lock: Don't free "lock_seq_stat" if read_count isn't zero perf lock: Correct field name "flags"
2020-11-16selftests/bpf: Fix error return code in run_getsockopt_test()Wang Hai1-1/+2
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 65b4414a05eb ("selftests/bpf: add sockopt test that exercises BPF_F_ALLOW_MULTI") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20201116101633.64627-1-wanghai38@huawei.com
2020-11-16perf test: Avoid an msan warning in a copied stack.Ian Rogers1-0/+7
This fix is for a failure that occurred in the DWARF unwind perf test. Stack unwinders may probe memory when looking for frames. Memory sanitizer will poison and track uninitialized memory on the stack, and on the heap if the value is copied to the heap. This can lead to false memory sanitizer failures for the use of an uninitialized value. Avoid this problem by removing the poison on the copied stack. The full msan failure with track origins looks like: ==2168==WARNING: MemorySanitizer: use-of-uninitialized-value #0 0x559ceb10755b in handle_cfi elfutils/libdwfl/frame_unwind.c:648:8 #1 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4 #2 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7 #3 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10 #4 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17 #5 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17 #6 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14 #7 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10 #8 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8 #9 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8 #10 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26 #11 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0) #12 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2 #13 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9 #14 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9 #15 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8 #16 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9 #17 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9 #18 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4 #19 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9 #20 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11 #21 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8 #22 0x559cea95fbce in run_argv tools/perf/perf.c:409:2 #23 0x559cea95fbce in main tools/perf/perf.c:539:3 Uninitialized value was stored to memory at #0 0x559ceb106acf in __libdwfl_frame_reg_set elfutils/libdwfl/frame_unwind.c:77:22 #1 0x559ceb106acf in handle_cfi elfutils/libdwfl/frame_unwind.c:627:13 #2 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4 #3 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7 #4 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10 #5 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17 #6 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17 #7 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14 #8 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10 #9 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8 #10 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8 #11 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26 #12 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0) #13 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2 #14 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9 #15 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9 #16 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8 #17 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9 #18 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9 #19 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4 #20 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9 #21 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11 #22 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8 #23 0x559cea95fbce in run_argv tools/perf/perf.c:409:2 #24 0x559cea95fbce in main tools/perf/perf.c:539:3 Uninitialized value was stored to memory at #0 0x559ceb106a54 in handle_cfi elfutils/libdwfl/frame_unwind.c:613:9 #1 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4 #2 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7 #3 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10 #4 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17 #5 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17 #6 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14 #7 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10 #8 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8 #9 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8 #10 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26 #11 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0) #12 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2 #13 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9 #14 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9 #15 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8 #16 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9 #17 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9 #18 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4 #19 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9 #20 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11 #21 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8 #22 0x559cea95fbce in run_argv tools/perf/perf.c:409:2 #23 0x559cea95fbce in main tools/perf/perf.c:539:3 Uninitialized value was stored to memory at #0 0x559ceaff8800 in memory_read tools/perf/util/unwind-libdw.c:156:10 #1 0x559ceb10f053 in expr_eval elfutils/libdwfl/frame_unwind.c:501:13 #2 0x559ceb1060cc in handle_cfi elfutils/libdwfl/frame_unwind.c:603:18 #3 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4 #4 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7 #5 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10 #6 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17 #7 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17 #8 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14 #9 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10 #10 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8 #11 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8 #12 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26 #13 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0) #14 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2 #15 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9 #16 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9 #17 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8 #18 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9 #19 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9 #20 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4 #21 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9 #22 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11 #23 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8 #24 0x559cea95fbce in run_argv tools/perf/perf.c:409:2 #25 0x559cea95fbce in main tools/perf/perf.c:539:3 Uninitialized value was stored to memory at #0 0x559cea9027d9 in __msan_memcpy llvm/llvm-project/compiler-rt/lib/msan/msan_interceptors.cpp:1558:3 #1 0x559cea9d2185 in sample_ustack tools/perf/arch/x86/tests/dwarf-unwind.c:41:2 #2 0x559cea9d202c in test__arch_unwind_sample tools/perf/arch/x86/tests/dwarf-unwind.c:72:9 #3 0x559ceabc9cbd in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:106:6 #4 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26 #5 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0) #6 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2 #7 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9 #8 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9 #9 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8 #10 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9 #11 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9 #12 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4 #13 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9 #14 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11 #15 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8 #16 0x559cea95fbce in run_argv tools/perf/perf.c:409:2 #17 0x559cea95fbce in main tools/perf/perf.c:539:3 Uninitialized value was created by an allocation of 'bf' in the stack frame of function 'perf_event__synthesize_mmap_events' #0 0x559ceafc5f60 in perf_event__synthesize_mmap_events tools/perf/util/synthetic-events.c:445 SUMMARY: MemorySanitizer: use-of-uninitialized-value elfutils/libdwfl/frame_unwind.c:648:8 in handle_cfi Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: clang-built-linux@googlegroups.com Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sandeep Dasgupta <sdasgup@google.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20201113182053.754625-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-11-16perf inject: Fix file corruption due to event deletionAl Grant1-11/+1
"perf inject" can create corrupt files when synthesizing sample events from AUX data. This happens when in the input file, the first event (for the AUX data) has a different sample_type from the second event (generally dummy). Specifically, they differ in the bits that indicate the standard fields appended to perf records in the mmap buffer. "perf inject" deletes the first event and moves up the second event to first position. The problem is with the synthetic PERF_RECORD_MMAP (etc.) events created by "perf record". Since these are synthetic versions of events which are normally produced by the kernel, they have to have the standard fields appended as described by sample_type. "perf record" fills these in with zeroes, including the IDENTIFIER field; perf readers interpret records with zero IDENTIFIER using the descriptor for the first event in the file. Since "perf inject" changes the first event, these synthetic records are then processed with the wrong value of sample_type, and the perf reader reads bad data, reports on incorrect length records etc. Mismatching sample_types are seen with "perf record -e cs_etm//", where the AUX event has TID|TIME|CPU|IDENTIFIER and the dummy event has TID|TIME|IDENTIFIER. Perhaps they could be the same, but it isn't normally a problem if they aren't - perf has no problems reading the file. The sample_types have to agree on the position of IDENTIFIER, because that's how perf finds the right event descriptor in the first place, but they don't normally have to agree on other fields, and perf doesn't check that they do. The problem is specific to the way "perf inject" reorganizes the events and the way synthetic MMAP events are recorded with a zero identifier. A simple solution is to stop "perf inject" deleting the tracing event. Committer testing Removed the now unused 'evsel' variable, update the comment about the evsel removal not being performed anymore, and apply the patch manually as it failed with this warning: warning: Patch sent with format=flowed; space at the end of lines might be lost. Testing it with: $ perf bench internals inject-build-id # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 8.543 msec (+- 0.130 msec) Average time per event: 0.838 usec (+- 0.013 usec) Average memory usage: 12717 KB (+- 9 KB) Average build-id-all injection took: 5.710 msec (+- 0.058 msec) Average time per event: 0.560 usec (+- 0.006 usec) Average memory usage: 12079 KB (+- 7 KB) $ Signed-off-by: Al Grant <al.grant@arm.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> LPU-Reference: b9cf5611-daae-2390-3439-6617f8f0a34b@foss.arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-11-14bpf: Relax return code check for subprogramsDmitrii Banshchikov2-0/+20
Currently verifier enforces return code checks for subprograms in the same manner as it does for program entry points. This prevents returning arbitrary scalar values from subprograms. Scalar type of returned values is checked by btf_prepare_func_args() and hence it should be safe to allow only scalars for now. Relax return code checks for subprograms and allow any correct scalar values. Fixes: 51c39bb1d5d10 (bpf: Introduce function-by-function verification) Signed-off-by: Dmitrii Banshchikov <me@ubique.spb.ru> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201113171756.90594-1-me@ubique.spb.ru
2020-11-13tools, bpftool: Add missing close before bpftool net attach exitWang Hai1-9/+9
progfd is created by prog_parse_fd() in do_attach() and before the latter returns in case of success, the file descriptor should be closed. Fixes: 04949ccc273e ("tools: bpftool: add net attach command to attach XDP on interface") Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20201113115152.53178-1-wanghai38@huawei.com
2020-11-12Merge tag 'net-5.10-rc4' of ↵Linus Torvalds9-18/+281
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Current release - regressions: - arm64: dts: fsl-ls1028a-kontron-sl28: specify in-band mode for ENETC Current release - bugs in new features: - mptcp: provide rmem[0] limit offset to fix oops Previous release - regressions: - IPv6: Set SIT tunnel hard_header_len to zero to fix path MTU calculations - lan743x: correctly handle chips with internal PHY - bpf: Don't rely on GCC __attribute__((optimize)) to disable GCSE - mlx5e: Fix VXLAN port table synchronization after function reload Previous release - always broken: - bpf: Zero-fill re-used per-cpu map element - fix out-of-order UDP packets when forwarding with UDP GSO fraglists turned on: - fix UDP header access on Fast/frag0 UDP GRO - fix IP header access and skb lookup on Fast/frag0 UDP GRO - ethtool: netlink: add missing netdev_features_change() call - net: Update window_clamp if SOCK_RCVBUF is set - igc: Fix returning wrong statistics - ch_ktls: fix multiple leaks and corner cases in Chelsio TLS offload - tunnels: Fix off-by-one in lower MTU bounds for ICMP/ICMPv6 replies - r8169: disable hw csum for short packets on all chip versions - vrf: Fix fast path output packet handling with async Netfilter rules" * tag 'net-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits) lan743x: fix use of uninitialized variable net: udp: fix IP header access and skb lookup on Fast/frag0 UDP GRO net: udp: fix UDP header access on Fast/frag0 UDP GRO devlink: Avoid overwriting port attributes of registered port vrf: Fix fast path output packet handling with async Netfilter rules cosa: Add missing kfree in error path of cosa_write net: switch to the kernel.org patchwork instance ch_ktls: stop the txq if reaches threshold ch_ktls: tcb update fails sometimes ch_ktls/cxgb4: handle partial tag alone SKBs ch_ktls: don't free skb before sending FIN ch_ktls: packet handling prior to start marker ch_ktls: Correction in middle record handling ch_ktls: missing handling of header alone ch_ktls: Correction in trimmed_len calculation cxgb4/ch_ktls: creating skbs causes panic ch_ktls: Update cheksum information ch_ktls: Correction in finding correct length cxgb4/ch_ktls: decrypted bit is not enough net/x25: Fix null-ptr-deref in x25_connect ...
2020-11-12perf test: Update branch sample pattern for cs-etmLeo Yan1-1/+1
Since the commit 943b69ac1884 ("perf parse-events: Set exclude_guest=1 for user-space counting"), 'exclude_guest=1' is set for user-space counting; and the branch sample's modifier has been altered, the sample event name has been changed from "branches:u:" to "branches:uH:", which gives out info for "user-space and host counting". But the cs-etm testing's regular expression cannot match the updated branch sample event and leads to test failure. This patch updates the branch sample pattern by using a more flexible expression '.*' to match branch sample's modifiers, so that allows the testing to work as expected. Fixes: 943b69ac1884 ("perf parse-events: Set exclude_guest=1 for user-space counting") Signed-off-by: Leo Yan <leo.yan@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: coresight ml <coresight@lists.linaro.org> Cc: stable@kernel.org Link: http://lore.kernel.org/lkml/20201110063417.14467-2-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-11-12perf test: Fix a typo in cs-etm testingLeo Yan1-1/+1
Fix a typo: s/devce_name/device_name. Fixes: fe0aed19b266 ("perf test: Introduce script for Arm CoreSight testing") Signed-off-by: Leo Yan <leo.yan@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: coresight ml <coresight@lists.linaro.org> Cc: stable@kernel.org Link: http://lore.kernel.org/lkml/20201110063417.14467-1-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-11-12tools arch: Update arch/x86/lib/mem{cpy,set}_64.S copies used in 'perf bench ↵Arnaldo Carvalho de Melo5-10/+22
mem memcpy' To bring in the change made in this cset: 4d6ffa27b8e5116c ("x86/lib: Change .weak to SYM_FUNC_START_WEAK for arch/x86/lib/mem*_64.S") 6dcc5627f6aec4cb ("x86/asm: Change all ENTRY+ENDPROC to SYM_FUNC_*") I needed to define SYM_FUNC_START_LOCAL() as SYM_L_GLOBAL as mem{cpy,set}_{orig,erms} are used by 'perf bench'. This silences these perf tools build warnings: Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S' diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S Warning: Kernel ABI header at 'tools/arch/x86/lib/memset_64.S' differs from latest version at 'arch/x86/lib/memset_64.S' diff -u tools/arch/x86/lib/memset_64.S arch/x86/lib/memset_64.S Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Fangrui Song <maskray@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-11-12perf lock: Don't free "lock_seq_stat" if read_count isn't zeroLeo Yan1-1/+1
When execute command "perf lock report", it hits failure and outputs log as follows: perf: builtin-lock.c:623: report_lock_release_event: Assertion `!(seq->read_count < 0)' failed. Aborted This is an imbalance issue. The locking sequence structure "lock_seq_stat" contains the reader counter and it is used to check if the locking sequence is balance or not between acquiring and releasing. If the tool wrongly frees "lock_seq_stat" when "read_count" isn't zero, the "read_count" will be reset to zero when allocate a new structure at the next time; thus it causes the wrong counting for reader and finally results in imbalance issue. To fix this issue, if detects "read_count" is not zero (means still have read user in the locking sequence), goto the "end" tag to skip freeing structure "lock_seq_stat". Fixes: e4cef1f65061 ("perf lock: Fix state machine to recognize lock sequence") Signed-off-by: Leo Yan <leo.yan@linaro.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/r/20201104094229.17509-2-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-11-12perf lock: Correct field name "flags"Leo Yan1-1/+1
The tracepoint "lock:lock_acquire" contains field "flags" but not "flag". Current code wrongly retrieves value from field "flag" and it always gets zero for the value, thus "perf lock" doesn't report the correct result. This patch replaces the field name "flag" with "flags", so can read out the correct flags for locking. Fixes: e4cef1f65061 ("perf lock: Fix state machine to recognize lock sequence") Signed-off-by: Leo Yan <leo.yan@linaro.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/r/20201104094229.17509-1-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-11-12selftests/bpf: Fix unused attribute usage in subprogs_unused testAndrii Nakryiko1-2/+2
Correct attribute name is "unused". maybe_unused is a C++17 addition. This patch fixes compilation warning during selftests compilation. Fixes: 197afc631413 ("libbpf: Don't attempt to load unused subprog as an entry-point BPF program") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20201111231215.1779147-1-andrii@kernel.org
2020-11-10selftest: fix flower terse dump testsVlad Buslov1-2/+2
Iproute2 tc classifier terse dump has been accepted with modified syntax. Update the tests accordingly. Signed-off-by: Vlad Buslov <vlad@buslov.dev> Fixes: e7534fd42a99 ("selftests: implement flower classifier terse dump tests") Link: https://lore.kernel.org/r/20201107111928.453534-1-vlad@buslov.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-10kunit: tool: fix extra trailing \n in raw + parsed test outputDaniel Latypov2-3/+4
For simplcity, strip all trailing whitespace from parsed output. I imagine no one is printing out meaningful trailing whitespace via KUNIT_FAIL() or similar, and that if they are, they really shouldn't. `isolate_kunit_output()` yielded liens with trailing \n, which results in artifacty output like this: $ ./tools/testing/kunit/kunit.py run [16:16:46] [FAILED] example_simple_test [16:16:46] # example_simple_test: EXPECTATION FAILED at lib/kunit/kunit-example-test.c:29 [16:16:46] Expected 1 + 1 == 3, but [16:16:46] 1 + 1 == 2 [16:16:46] 3 == 3 [16:16:46] not ok 1 - example_simple_test [16:16:46] After this change: [16:16:46] # example_simple_test: EXPECTATION FAILED at lib/kunit/kunit-example-test.c:29 [16:16:46] Expected 1 + 1 == 3, but [16:16:46] 1 + 1 == 2 [16:16:46] 3 == 3 [16:16:46] not ok 1 - example_simple_test [16:16:46] We should *not* be expecting lines to end with \n in kunit_tool_test.py for this reason. Do the same for `raw_output()` as well which suffers from the same issue. This is a followup to [1], but rebased onto kunit-fixes to pick up the other raw_output() fix and fixes for kunit_tool_test.py. [1] https://lore.kernel.org/linux-kselftest/20201020233219.4146059-1-dlatypov@google.com/ Signed-off-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: David Gow <davidgow@google.com> Tested-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-11-10kunit: tool: print out stderr from make (like build warnings)Daniel Latypov1-4/+9
Currently the tool redirects make stdout + stderr, and only shows them if the make command fails. This means build warnings aren't shown to the user. This change prints the contents of stderr even if make succeeds, under the assumption these are only build warnings or other messages the user likely wants to see. We drop stdout from the raised exception since we can no longer easily collate stdout and stderr and just showing the stderr seems fine. Example with a warning: [14:56:35] Building KUnit Kernel ... ../lib/kunit/kunit-test.c: In function ‘kunit_test_successful_try’: ../lib/kunit/kunit-test.c:19:6: warning: unused variable ‘unused’ [-Wunused-variable] 19 | int unused; | ^~~~~~ [14:56:40] Starting KUnit Kernel ... Note the stderr has a trailing \n, and since we use print, we add another, but it helps separate make and kunit.py output. Example with a build error: [15:02:45] Building KUnit Kernel ... ERROR:root:../lib/kunit/kunit-test.c: In function ‘kunit_test_successful_try’: ../lib/kunit/kunit-test.c:19:2: error: unknown type name ‘invalid_type’ 19 | invalid_type *test = data; | ^~~~~~~~~~~~ ... Signed-off-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-11 02:46:41 +0000