summaryrefslogtreecommitdiffstats
path: root/tools/usb
AgeCommit message (Collapse)AuthorFilesLines
2018-02-21tools: fix cross-compile var clobberingMartin Kelly1-1/+0
Currently a number of Makefiles break when used with toolchains that pass extra flags in CC and other cross-compile related variables (such as --sysroot). Thus we get this error when we use a toolchain that puts --sysroot in the CC var: ~/src/linux/tools$ make iio [snip] iio_event_monitor.c:18:10: fatal error: unistd.h: No such file or directory #include <unistd.h> ^~~~~~~~~~ This occurs because we clobber several env vars related to cross-compiling with lines like this: CC = $(CROSS_COMPILE)gcc Although this will point to a valid cross-compiler, we lose any extra flags that might exist in the CC variable, which can break toolchains that rely on them (for example, those that use --sysroot). This easily shows up using a Yocto SDK: $ . [snip]/sdk/environment-setup-cortexa8hf-neon-poky-linux-gnueabi $ echo $CC arm-poky-linux-gnueabi-gcc -march=armv7-a -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a8 --sysroot=[snip]/sdk/sysroots/cortexa8hf-neon-poky-linux-gnueabi $ echo $CROSS_COMPILE arm-poky-linux-gnueabi- $ echo ${CROSS_COMPILE}gcc krm-poky-linux-gnueabi-gcc Although arm-poky-linux-gnueabi-gcc is a cross-compiler, we've lost the --sysroot and other flags that enable us to find the right libraries to link against, so we can't find unistd.h and other libraries and headers. Normally with the --sysroot flag we would find unistd.h in the sdk directory in the sysroot: $ find [snip]/sdk/sysroots -path '*/usr/include/unistd.h' [snip]/sdk/sysroots/cortexa8hf-neon-poky-linux-gnueabi/usr/include/unistd.h The perf Makefile adds CC = $(CROSS_COMPILE)gcc if and only if CC is not already set, and it compiles correctly with the above toolchain. So, generalize the logic that perf uses in the common Makefile and remove the manual CC = $(CROSS_COMPILE)gcc lines from each Makefile. Note that this patch does not fix cross-compile for all the tools (some have other bugs), but it does fix it for all except usb and acpi, which still have other unrelated issues. I tested both with and without the patch on native and cross-build and there appear to be no regressions. Link: http://lkml.kernel.org/r/20180107214028.23771-1-martin@martingkelly.com Signed-off-by: Martin Kelly <martin@martingkelly.com> Acked-by: Mark Brown <broonie@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Pali Rohar <pali.rohar@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Lv Zheng <lv.zheng@intel.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Valentina Manea <valentina.manea.m@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-01-22usbip: list: don't list devices attached to vhci_hcdShuah Khan1-0/+9
usbip host lists devices attached to vhci_hcd on the same server when user does attach over localhost or specifies the server as the remote. usbip attach -r localhost -b busid or usbip attach -r servername (or server IP) Fix it to check and not list devices that are attached to vhci_hcd. Cc: stable@vger.kernel.org Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-22usbip: prevent bind loops on devices attached to vhci_hcdShuah Khan1-0/+9
usbip host binds to devices attached to vhci_hcd on the same server when user does attach over localhost or specifies the server as the remote. usbip attach -r localhost -b busid or usbip attach -r servername (or server IP) Unbind followed by bind works, however device is left in a bad state with accesses via the attached busid result in errors and system hangs during shutdown. Fix it to check and bail out if the device is already attached to vhci_hcd. Cc: stable@vger.kernel.org Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-04tools: usb: usbip: fix fd leak in case of 'fread' failureElad Wexler1-1/+4
Fix possible resource leak: fd Signed-off-by: Elad Wexler <elad.wexler@gmail.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-04tools: usb: usbip_device_driver: prefer 'unsigned int' to 'unsigned'Elad Wexler1-1/+1
Fixup a coding style issue Signed-off-by: Elad Wexler <elad.wexler@gmail.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02Merge 4.15.0-rc6 into usb-nextGreg Kroah-Hartman1-3/+6
We want the USB fixes in here, and this resolves a merge issue with the vhci_rx.c file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-19usbip: fix usbip bind writing random string after command in match_busidJuan Zea1-3/+6
usbip bind writes commands followed by random string when writing to match_busid attribute in sysfs, caused by using full variable size instead of string length. Signed-off-by: Juan Zea <juan.zea@qindel.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-18Merge 4.15-rc4 into usb-nextGreg Kroah-Hartman1-8/+16
We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-08usbip: prevent vhci_hcd driver from leaking a socket pointer addressShuah Khan1-4/+4
When a client has a USB device attached over IP, the vhci_hcd driver is locally leaking a socket pointer address via the /sys/devices/platform/vhci_hcd/status file (world-readable) and in debug output when "usbip --debug port" is run. Fix it to not leak. The socket pointer address is not used at the moment and it was made visible as a convenient way to find IP address from socket pointer address by looking up /proc/net/{tcp,tcp6}. As this opens a security hole, the fix replaces socket pointer address with sockfd. Reported-by: Secunia Research <vuln@secunia.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-08tools/usbip: fixes potential (minor) "buffer overflow" (detected on recent ↵Julien BOIBESSOT1-1/+1
gcc with -Werror) Fixes following build error: vhci_driver.c: In function 'refresh_imported_device_list': vhci_driver.c:118:37: error: 'snprintf' output may be truncated before the last format character [-Werror=format-truncation=] snprintf(status, sizeof(status), "status.%d", i); ^~~~~~~~~~~ vhci_driver.c:118:4: note: 'snprintf' output between 9 and 18 bytes into a destination of size 17 snprintf(status, sizeof(status), "status.%d", i); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-07tools/usbip: fixes build with musl libc toolchainJulien BOIBESSOT1-1/+1
Indeed musl doesn't define old SIGCLD signal name but only new one SIGCHLD. SIGCHLD is the new POSIX name for that signal so it doesn't change anything on other libcs. This fixes this kind of build error: usbipd.c: In function ‘set_signal’: usbipd.c:459:12: error: 'SIGCLD' undeclared (first use in this function) sigaction(SIGCLD, &act, NULL); ^~~~~~ usbipd.c:459:12: note: each undeclared identifier is reported only once for each function it appears in Makefile:407: recipe for target 'usbipd.o' failed make[3]: *** [usbipd.o] Error 1 Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30usbip: fix usbip attach to find a port that matches the requested speedShuah Khan1-3/+11
usbip attach fails to find a free port when the device on the first port is a USB_SPEED_SUPER device and non-super speed device is being attached. It keeps checking the first port and returns without a match getting stuck in a loop. Fix it check to find the first port with matching speed. Reported-by: Juan Zea <juan.zea@qindel.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-13Merge tag 'usb-4.15-rc1' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big set of USB and PHY driver updates for 4.15-rc1. There is the usual amount of gadget and xhci driver updates, along with phy and chipidea enhancements. There's also a lot of SPDX tags and license boilerplate cleanups as well, which provide some churn in the diffstat. Other major thing is the typec code that moved out of staging and into the "real" part of the drivers/usb/ tree, which was nice to see happen. All of these have been in linux-next with no reported issues for a while" * tag 'usb-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits) usb: gadget: f_fs: Fix use-after-free in ffs_free_inst USB: usbfs: compute urb->actual_length for isochronous usb: core: message: remember to reset 'ret' to 0 when necessary USB: typec: Remove remaining redundant license text USB: typec: add SPDX identifiers to some files USB: renesas_usbhs: rcar?.h: add SPDX tags USB: chipidea: ci_hdrc_tegra.c: add SPDX line USB: host: xhci-debugfs: add SPDX lines USB: add SPDX identifiers to all remaining Makefiles usb: host: isp1362-hcd: remove a couple of redundant assignments USB: adutux: remove redundant variable minor usb: core: add a new usb_get_ptm_status() helper usb: core: add a 'type' parameter to usb_get_status() usb: core: introduce a new usb_get_std_status() helper usb: core: rename usb_get_status() 'type' argument to 'recip' usb: core: add Status Type definitions USB: gadget: Remove redundant license text USB: gadget: function: Remove redundant license text USB: gadget: udc: Remove redundant license text USB: gadget: legacy: Remove redundant license text ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman15-0/+15
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-04usbip: tools: Install all headers needed for libusbip developmentBen Hutchings1-1/+2
usbip_host_driver.h now depends on several additional headers, which need to be installed along with it. Fixes: 021aed845303 ("staging: usbip: userspace: migrate usbip_host_driver ...") Fixes: 3391ba0e2792 ("usbip: tools: Extract generic code to be shared with ...") Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-31usbip: auto retry for concurrent attachNobuo Iwata1-15/+20
This patch adds recovery from false busy state on concurrent attach operation. The procedure of attach operation is as below. 1) Find an unused port in /sys/devices/platform/vhci_hcd/status. (userspace) 2) Request attach found port to driver through /sys/devices/platform/vhci_hcd/attach. (userspace) 3) Lock table, reserve requested port and unlock table. (vhci driver) Attaching more than one remote devices concurrently, same unused port number will be found in step-1. Then one request will succeed and others will fail even though there are some unused ports. With this patch, driver returns EBUSY when requested port has already been used. In this case, attach command retries from step-1: finding another unused port. If there's no unused port, the attach operation will fail in step-1. Otherwise it retries automatically using another unused port. vhci-hcd's interface (only errno) is changed as following. Current errno New errno Condition EINVAL same as left specified port number is in invalid range EAGAIN same as left platform_get_drvdata() failed EINVAL same as left specified socket fd is not valid EINVAL EBUSY specified port status is not free The errno EBUSY was not used in userspace src/usbip_attach.c:import_device(). It is needed to distinguish the condition to be able to retry from other unrecoverable errors. It is possible to avoid this failure by introducing userspace exclusive control. But it's exaggerated for this special condition. The locking itself has done in driver. As an alternate solution, userspace doesn't specify port number, driver searches unused port and it returns port number to the userspace. With this solution, the interface is much different than this patch. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-20Merge tag 'usb-for-v4.13' of ↵Greg Kroah-Hartman1-7/+9
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-testing Felipe writes: usb: changes for v4.13 merge window This time around we have a total of 57 non-merge commits. A list of most important changes follows: - Improvements to dwc3 tracing interface - Initial dual-role support for dwc3 - Improvements to how we handle DMA resources in dwc3 - A new f_uac1 implementation which much more flexible - Removal of AVR32 bits - Improvements to f_mass_storage driver
2017-06-13usbip: vhci-hcd: Add USB3 SuperSpeed supportYuyang Du3-9/+25
This patch adds a USB3 HCD to an existing USB2 HCD and provides the support of SuperSpeed, in case the device can only be enumerated with SuperSpeed. The bulk of the added code in usb3_bos_desc and hub_control to support SuperSpeed is borrowed from the commit 1cd8fd2887e162ad ("usb: gadget: dummy_hcd: add SuperSpeed support"). With this patch, each vhci will have VHCI_HC_PORTS HighSpeed ports and VHCI_HC_PORTS SuperSpeed ports. Suggested-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Yuyang Du <yuyang.du@intel.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-13usbip: vhci-hcd: Rework vhci_hcd_initYuyang Du2-1/+2
A vhci struct is added as the platform-specific data to the vhci platform device, in order to get the vhci by its platform device. This is done in vhci_hcd_init(). Signed-off-by: Yuyang Du <yuyang.du@intel.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-13usb: usbip tool: Fix parse_status()Yuyang Du2-23/+17
In parse_status(), all nports number of idev's are initiated to 0 by memset(), it is simply wrong, because parse_status() reads the status sys file one by one, therefore, it can only update the according vhci_driver->idev's for it to parse. Reviewed-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Yuyang Du <yuyang.du@intel.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-13usb: usbip tool: Fix refresh_imported_device_list()Yuyang Du1-6/+21
The commit 0775a9cbc694e8c7 ("usbip: vhci extension: modifications to vhci driver") introduced multiple controllers, but the status of the ports are only extracted from the first status file, fix it. Reviewed-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Yuyang Du <yuyang.du@intel.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-13usb: usbip tool: Add ncontrollers in vhci_driver structureYuyang Du2-0/+37
A new field ncontrollers is added to the vhci_driver structure. And this field is stored by scanning the vhci_hcd* dirs in the platform udev. Suggested-and-reviewed-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Yuyang Du <yuyang.du@intel.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-13usb: usbip tool: Check the return of get_nports()Yuyang Du1-1/+8
If we get nonpositive number of ports, there is no sense to continue, then fail gracefully. In addition, the commit 0775a9cbc694e8c72 ("usbip: vhci extension: modifications to vhci driver") introduced configurable numbers of controllers and ports, but we have a static port number maximum, MAXNPORT. If exceeded, the idev array will be overflown. We fix it by validating the nports to make sure the port number max is not exceeded. Reviewed-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Yuyang Du <yuyang.du@intel.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-02tools: usb: testusb: update default vary for superspeedFelipe Balbi1-7/+9
Currently, default vary will not accomodate superspeed endpoints causing unexpected babble errors in the IN direction. Let's update default 'vary' parameter so that we can maintain a "short-less" transfer as hinted at the comment. Reported-by: Ammy Yi <ammy.yi@intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-04-18usb: fix some references for /proc/bus/usbMauro Carvalho Chehab1-1/+1
Since when we got rid of usbfs, the /proc/bus/usb is now elsewhere. Fix references for it. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Acked-by: Serge Hallyn <serge@hallyn.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08usb: usbip tool: Fix get_nports()Yuyang Du1-23/+5
The commit 0775a9cbc694e8c72 ("usbip: vhci extension: modifications to vhci driver") introduced multiple controllers, and nports as a sys file, and claimed to read the nports from it, but it didn't. In addition, the get_nports() has been so wrong that even with 8 port lines for instance, it gets 7 (I am guessing it is due to a '\n' mess). Nevertheless, we fix it by reading the nports attribute. Reviewed-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Yuyang Du <yuyang.du@intel.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17usbip: Fix implicit fallthrough warningJonathan Dieter1-0/+2
GCC 7 now warns when switch statements fall through implicitly, and with -Werror enabled in configure.ac, that makes these tools unbuildable. We fix this by notifying the compiler that this particular case statement is meant to fall through. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Jonathan Dieter <jdieter@lesbg.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17usbip: Fix potential format overflow in userspace toolsJonathan Dieter2-6/+31
The usbip userspace tools call sprintf()/snprintf() and don't check for the return value which can lead the paths to overflow, truncating the final file in the path. More urgently, GCC 7 now warns that these aren't checked with -Wformat-overflow, and with -Werror enabled in configure.ac, that makes these tools unbuildable. This patch fixes these problems by replacing sprintf() with snprintf() in one place and adding checks for the return value of snprintf(). Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Jonathan Dieter <jdieter@lesbg.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-16tools/usb: Add .gitignore filePrarit Bhargava1-0/+2
Add .gitignore file for untracked files in tools/usb. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-26Merge tag 'usb-for-v4.11' of ↵Greg Kroah-Hartman1-2/+50
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: USB: changes for v4.11 Here's the big pull request for the Gadget API. Again the majority of changes sit in dwc2 driver. Most important changes contain a workaround for GOTGCTL being wrong, a sleep-inside-spinlock fix and the big series of cleanups on dwc2. One important thing on dwc3 is that we don't anymore need gadget drivers to cope with unaligned OUT transfers for us. We have support for appending one extra chained TRB to align transfer ourselves. Apart from these, the usual set of typos, non-critical fixes, etc.
2017-01-24tools: usb: ffs-test: add SS descriptorsFelipe Balbi1-1/+49
Without SS descriptors, we have no possibility of running on SS controllers such as DWC3. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-24tools: usb: ffs-test: switch to _DEFAULT_SOURCEFelipe Balbi1-1/+1
_BSD_SOURCE is deprecated and gives a build warning. Let's use _DEFAULT_SOURCE instead. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-10tools: usb: usbip: Update READMEKrzysztof Opasiak1-1/+56
Update README file: - remove outdated parts - clarify terminology and general structure - add some description of vUDC Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-10tools: usb: usbip: Add simple script to show how to setup vUDCKrzysztof Opasiak1-0/+107
Add some simple script which creates a USB gadget using ConfigFS and then exports it using vUDC. This may be useful for people who just started playing with USB/IP and vUDC as it shows exact steps how to setup all stuff. Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-06usbip: add missing compile time generated files to .gitignoreShuah Khan1-0/+4
Add the following files to .gitignore compile libsrc/libusbip_la-sysfs_utils.lo libsrc/libusbip_la-usbip_device_driver.lo libsrc/libusbip_la-usbip_host_common.lo Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-07usbip: deletion of incorrect socket descriptor checkingNobuo Iwata1-7/+0
This patch removes checking of socket descriptor value in daemons. It was checked to be less than FD_SETSIZE(1024 usually) but it's not correct. To be exact, the maximum value of descriptor comes from rlimit(RLIMIT_NOFILE). Following kernel code determines the value : get_unused_fd_flags() : fs/files.c __alloc_fd() : fs/files.c expand_files() : fs/files.c The defalut (soft limit) is defines as INR_OPEN_CUR(1024) in include/linux/fs.h which is referenced form INIT_RLIMS in include/asm-generic/resource.h. The value may be modified with ulimt, sysctl, security configuration and etc. With the kernel code above, when socket() system call returns positive value, the value must be within rlimit(RLIMIT_NOFILE). No extra checking is needed when socket() returns positive. Without 'usbip: vhci number of ports extension' patch set, there's no practical problem because of number of USB port restriction. With the patch set, the value of socket descriptor can exceed FD_SETSIZE(1024 usually) if the rlimit is changed. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-03usbip: adding names db to port operationNobuo Iwata1-2/+11
Adding names database to port command. BEFORE) 'unknown' for vendor and product string. Imported USB devices ==================== Port 00: <Port in Use> at Low Speed(1.5Mbps) unknown vendor : unknown product (03f0:0224) 3-1 -> usbip://10.0.2.15:3240/5-1 -> remote bus/dev 005/002 AFTER) Most vendor string will be converted. Imported USB devices ==================== Port 00: <Port in Use> at Low Speed(1.5Mbps) Hewlett-Packard : unknown product (03f0:0224) 3-1 -> usbip://10.0.2.15:3240/5-1 -> remote bus/dev 005/002 Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-26usbip: tools: Start using VUDC backend in usbip toolsIgor Kotrasinski3-6/+112
Modify userspace tools to allow exporting and connecting to vudc. This commit is a result of cooperation between Samsung R&D Institute Poland and Open Operating Systems Student Society at University of Warsaw (O2S3@UW) consisting of: Igor Kotrasinski <ikotrasinsk@gmail.com> Karol Kosik <karo9@interia.eu> Ewelina Kosmider <3w3lfin@gmail.com> Dawid Lazarczyk <lazarczyk.dawid@gmail.com> Piotr Szulc <ps347277@students.mimuw.edu.pl> Tutor and project owner: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Igor Kotrasinski <i.kotrasinsk@samsung.com> Signed-off-by: Ewelina Kosmider <3w3lfin@gmail.com> [Various bug fixes and improvements] Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-26usbip: tools: Add vudc backend to usbip toolsKrzysztof Opasiak4-0/+201
Adds an equivalent of usbip_host_driver for the vudc. Most of the code is already shared, but this adds some vudc specific code for getting information about devices. Based on code created in cooperation with Open Operating Systems Student Society at University of Warsaw (O2S3@UW) consisting of: Igor Kotrasinski <ikotrasinsk@gmail.com> Karol Kosik <karo9@interia.eu> Ewelina Kosmider <3w3lfin@gmail.com> Dawid Lazarczyk <lazarczyk.dawid@gmail.com> Piotr Szulc <ps347277@students.mimuw.edu.pl> Tutor and project owner: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-26usbip: tools: Extract generic code to be shared with vudc backendKrzysztof Opasiak6-278/+428
Extract the code from current stub driver backend and a common interface for both stub driver and vudc. This allows to share most of the usbipd code for both of them. Based on code created in cooperation with Open Operating Systems Student Society at University of Warsaw (O2S3@UW) consisting of: Igor Kotrasinski <ikotrasinsk@gmail.com> Karol Kosik <karo9@interia.eu> Ewelina Kosmider <3w3lfin@gmail.com> Dawid Lazarczyk <lazarczyk.dawid@gmail.com> Piotr Szulc <ps347277@students.mimuw.edu.pl> Tutor and project owner: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22Merge tag 'usb-for-v4.4' of ↵Greg Kroah-Hartman1-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v4.4 merge window This pull request is large with a total of 136 non-merge commits. Because of its size, we will only describe the big things in broad terms. Many will be happy to know that dwc3 is now almost twice as fast after some profiling and speed improvements. Also in dwc3, John Youn from Synopsys added support for their new DWC USB3.1 IP Core and the HAPS platform which can be used to validate it. A series of patches from Robert Baldyga cleaned up uses of ep->driver_data as a flag for "claimed endpoint" in favor of the new ep->claimed flag. Sudip Mukherjee fixed a ton of really old problems on the amd5536udc driver. That should make a few people happy. Heikki Krogerus worked on converting dwc3 to the unified device property interface. Together with these, there's a ton of non-critical fixes, typos and stuff like that. Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-27tools: usb: testusb: change the default value for length from 512 to 1024Peter Chen1-2/+2
For ctrl out test, it needs length > vary, so in order to run it with default parameters, we do this change. Acked-by: Michal Nazarewicz <mina86@mina86.com> Cc: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-27tools: usb: testusb: change the help textPeter Chen1-4/+4
The 'length' is the transfer length, not the packet size, so change the help text. Acked-by: Michal Nazarewicz <mina86@mina86.com> Cc: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-22tools: usbip: detach: avoid calling strlen() at each iterationEric Curtin1-1/+3
Instead of calling strlen on every iteration of the for loop, just call it once and cache the result in a temporary local variable which will be used in the for loop instead. Signed-off-by: Eric Curtin <ericcurtin17@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-15tools: ffs-aio-example: use endpoint addresses from descriptorsRobert Baldyga2-13/+18
This makes examples more platform independent and more compatible with USB standard, as endpoint addresses in given interface may differ between hardware platforms or even between configurations in single USB device. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12tools: ffs-aio-example: add missing wMaxPacketSize for HS descsRobert Baldyga1-0/+2
It's needed, to have more than 64 bytes of maxpacketsize. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-12-14Merge tag 'usb-3.19-rc1' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here's the big set of USB and PHY patches for 3.19-rc1. The normal churn in the USB gadget area is in here, as well as xhci and other individual USB driver updates. The PHY tree is also in here, as there were dependancies on the USB tree. All of these have been in linux-next" * tag 'usb-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (351 commits) arm: omap3: twl: remove usb phy init data usbip: fix error handling in stub_probe() usb: gadget: udc: missing curly braces USB: mos7720: delete some unneeded code wusb: replace memset by memzero_explicit usbip: remove unneeded structure usb: xhci: fix comment for PORT_DEV_REMOVE xhci: don't use the same variable for stopped and halted rings current TD xhci: clear extra bits from slot context when setting max exit latency xhci: cleanup finish_td function USB: adutux: NULL dereferences on disconnect usb: chipidea: fix platform_no_drv_owner.cocci warnings usb: chipidea: Fixed a few typos in comments Documentation: bindings: add doc for the USB2 ChipIdea USB driver usb: chipidea: add a usb2 driver for ci13xxx usb: chipidea: fix phy handling usb: chipidea: remove duplicate dev_set_drvdata for host_start usb: chipidea: parameter 'mode' isn't needed for hw_device_reset usb: chipidea: add controller reset API usb: chipidea: remove flag CI_HDRC_REQUIRE_TRANSCEIVER ...
2014-12-02usbip: remove unneeded structureJulia Lawall1-2/+0
Delete a local structure that is only used to be initialized by memset. A semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier x,i; @@ { ... when any -struct i x; <+... when != x - memset(&x,...); ...+> } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Valentina Manea <valentina.manea.m@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-20treewide: fix typo in printk and KconfigMasanari Iida1-1/+1
This patch fix spelling typo in printk and Kconfig within various part of kernel sources. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-20Replace mentions of "list_struct" to "list_head"Andrey Utkin1-1/+1
There's no such thing as "list_struct". Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-02 11:42:21 +0000