summaryrefslogtreecommitdiffstats
path: root/tools/thermal
AgeCommit message (Collapse)AuthorFilesLines
2020-04-07Merge tag 'thermal-v5.7-rc1' of ↵Linus Torvalds1-17/+9
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal updates from Daniel Lezcano: - Convert tsens configuration DT binding to yaml (Rajeshwari) - Add interrupt support on the rcar sensor (Niklas Söderlund) - Add a new Spreadtrum thermal driver (Baolin Wang) - Add thermal binding for the fsl scu board, a new API to retrieve the sensor id bound to the thermal zone and i.MX system controller sensor (Anson Huang)) - Remove warning log when a deferred probe is requested on Exynos (Marek Szyprowski) - Add the thermal monitoring unit support for imx8mm with its DT bindings (Anson Huang) - Rephrase the Kconfig text for clarity (Linus Walleij) - Use the gpio descriptor for the ti-soc-thermal (Linus Walleij) - Align msg structure to 4 bytes for i.MX SC, fix the Kconfig dependency, add the __may_be unused annotation for PM functions and the COMPILE_TEST option for imx8mm (Anson Huang) - Fix a dependency on regmap in Kconfig for qoriq (Yuantian Tang) - Add DT binding and support for the rcar gen3 r8a77961 and improve the error path on the rcar init function (Niklas Söderlund) - Cleanup and improvements for the tsens Qcom sensor (Amit Kucheria) - Improve code by removing lock and caching values in the rcar thermal sensor (Niklas Söderlund) - Cleanup in the qoriq drivers and add a call to imx_thermal_unregister_legacy_cooling in the removal function (Anson Huang) - Remove redundant 'maxItems' in tsens and sprd DT bindings (Rob Herring) - Change the thermal DT bindings by making the cooling-maps optional (Yuantian Tang) - Add Tiger Lake support (Sumeet Pawnikar) - Use scnprintf() for avoiding potential buffer overflow (Takashi Iwai) - Make pkg_temp_lock a raw_spinlock_t(Clark Williams) - Fix incorrect data types by changing them to signed on i.MX SC (Anson Huang) - Replace zero-length array with flexible-array member (Gustavo A. R. Silva) - Add support for i.MX8MP in the driver and in the DT bindings (Anson Huang) - Fix return value of the cpufreq_set_cur_state() function (Willy Wolff) - Remove abusing and scary WARN_ON in the cpufreq cooling device (Daniel Lezcano) - Fix build warning of incorrect argument type reported by sparse on imx8mm (Anson Huang) - Fix stub for the devfreq cooling device (Martin Blumenstingl) - Fix cpu idle cooling documentation (Sergey Vidishev) * tag 'thermal-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (52 commits) Documentation: cpu-idle-cooling: Fix diagram for 33% duty cycle thermal: devfreq_cooling: inline all stubs for CONFIG_DEVFREQ_THERMAL=n thermal: imx8mm: Fix build warning of incorrect argument type thermal/drivers/cpufreq_cooling: Remove abusing WARN_ON thermal/drivers/cpufreq_cooling: Fix return of cpufreq_set_cur_state thermal: imx8mm: Add i.MX8MP support dt-bindings: thermal: imx8mm-thermal: Add support for i.MX8MP thermal: qcom: tsens.h: Replace zero-length array with flexible-array member thermal: imx_sc_thermal: Fix incorrect data type thermal: int340x_thermal: Use scnprintf() for avoiding potential buffer overflow thermal: int340x: processor_thermal: Add Tiger Lake support thermal/x86_pkg_temp: Make pkg_temp_lock a raw_spinlock_t dt-bindings: thermal: make cooling-maps property optional dt-bindings: thermal: qcom-tsens: Remove redundant 'maxItems' dt-bindings: thermal: sprd: Remove redundant 'maxItems' thermal: imx: Calling imx_thermal_unregister_legacy_cooling() in .remove thermal: qoriq: Sort includes alphabetically thermal: qoriq: Use devm_add_action_or_reset() to handle all cleanups thermal: rcar_thermal: Remove lock in rcar_thermal_get_current_temp() thermal: rcar_thermal: Do not store ctemp in rcar_thermal_priv ...
2020-03-25.gitignore: add SPDX License IdentifierMasahiro Yamada1-0/+1
Add SPDX License Identifier to all .gitignore files. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-23thermal: int340x: processor_thermal: Add Tiger Lake supportSumeet Pawnikar1-17/+9
Added new PCI id for Tiger Lake processor thermal device along with MMIO RAPL support. Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1583489952-29612-1-git-send-email-sumeet.r.pawnikar@intel.com
2019-05-24treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 89Thomas Gleixner5-52/+5
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 or later as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 6 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520075211.856638608@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-04tools thermal tmon: Use -O3 instead of -O1 if availableJiri Olsa1-1/+1
Using -O3 instead of -O1 if it's supported by compiler. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Markus Mayer <mmayer@broadcom.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zhang Rui <rui.zhang@intel.com> Link: http://lkml.kernel.org/r/20190103161350.11446-2-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-28tools thermal tmon: Allow overriding CFLAGS assignmentsJiri Olsa1-4/+4
So that the user can provide, e.g. distro package alternative values. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Herton Krzesinski <herton@redhat.com> Cc: Markus Mayer <mmayer@broadcom.com> Cc: Zhang Rui <rui.zhang@intel.com> Link: http://lkml.kernel.org/r/20181212102537.25902-3-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-27tools/thermal: tmon: fix for segfaultFrank Asseg2-6/+7
Fixes a segfault occurring when e.g. <TAB> is pressed multiple times in the ncurses tmon application. The segfault is caused by incrementing cur_thermal_record in the main function without checking if it's value reached NR_THERMAL_RECORD immediately. Since the boundary check only occurred in update_thermal_data a race condition existed, which lead to an attempted read beyond the last element of the trec array. The fix was implemented by moving the cur_thermal_record incrementation to the update_thermal_data function using a temporary variable on which the boundary condition is checked before updating cur_thread_record, so that the variable is never incremented beyond the trec array's boundary. It seems the segfault does not occur on every machine: On a HP EliteBook G4 the segfault happens, while it does not happen on a Thinkpad T540p. Signed-off-by: Frank Asseg <frank.asseg@objecthunter.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-17Merge branch 'next' of ↵Linus Torvalds1-6/+12
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: - introduce brcmstb AVS TMON thermal driver (Brian Norris) - add Rockchip RV1108 support in rockchip thermal driver (Rocky Hao) - major rework on HISI driver plus additional support of hisi3660 (Daniel Lezcano) - add nvmem-cells binding on imx6sx (Leonard Crestez) - fix a NULL pointer dereference on ti thermal driver unloading (Tony Lindgren) - improve tmon tool to make it easier to cross-compile tmon (Markus Mayer) - add Coffee Lake and Cannon Lake support for intel processor and pch thermal drivers (Srinivas Pandruvada) - other small fixes and cleanups (Arvind Yadav, Colin Ian King, Allen Wild, Nicolin Chen, Baruch SiachNiklas Söderlund, Arnd Bergmann) * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (44 commits) thermal: pch: Add Cannon Lake support thermal: int340x: processor_thermal: Add Coffee Lake support thermal: int340x: processor_thermal: Add Cannon Lake support thermal: bxt: remove redundant variable trip thermal: cpu_cooling: pr_err() strings should end with newlines thermal: add brcmstb AVS TMON driver Documentation: devicetree: add binding for Broadcom STB AVS TMON thermal/drivers/hisi: Add support for hi3660 SoC thermal/drivers/hisi: Prepare to add support for other hisi platforms thermal/drivers/hisi: Add platform prefix to function name thermal/drivers/hisi: Put platform code together thermal/drivers/qcom-spmi: Use devm_iio_channel_get thermal/drivers/generic-iio-adc: Switch tz request to devm version thermal/drivers/step_wise: Fix temperature regulation misbehavior thermal/drivers/hisi: Use round up step value thermal/drivers/hisi: Move the clk setup in the corresponding functions thermal/drivers/hisi: Remove mutex_lock in the code thermal/drivers/hisi: Remove thermal data back pointer thermal/drivers/hisi: Convert long to int thermal/drivers/hisi: Rename and remove unused field ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2-0/+2
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-18tools/thermal: tmon: use $(PKG_CONFIG) instead of hard-coding pkg-configMarkus Mayer1-4/+5
To ease cross-compiling, make use of the $(PKG_CONFIG) variable rather than hard-coding calls to pkg-config. Signed-off-by: Markus Mayer <mmayer@broadcom.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2017-10-18tools/thermal: tmon: allow $(CC) to be defined externallyMarkus Mayer1-1/+1
It can be helpful, especially when using a build system, to set the C compiler externally. Signed-off-by: Markus Mayer <mmayer@broadcom.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2017-10-18tools/thermal: tmon: use "-fstack-protector" only if supportedMarkus Mayer1-1/+6
Most, but not all, toolchains support the "-fstack-protector" flag. We check if the compiler supports the flag before using it. This allows tmon to be compiled for more environments. Signed-off-by: Markus Mayer <mmayer@broadcom.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-10-10tools/thermal: tmon: use pkg-config also for CFLAGSOlaf Hering1-0/+3
The header <panel.h> might be in /usr/include/ncursesw, which is not part of the standard include path. This fixes compile on openSUSE. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-05-09tools/thermal: tmon: fixed the 'make install' commandAnand Moon1-8/+0
To install tmon we issue "make install" which produces bellow error. root@odroidxu3:/usr/src/odroidxu3-4.y-testing/tools/thermal/tmon# make install mkdir -p /usr/bin install -m 755 -p "tmon" "/usr/bin/tmon" mkdir -p / install -m 644 -p "" "/" install: cannot stat ‘’: No such file or directory make: [install] Error 1 (ignored) Signed-off-by: Anand Moon <linux.amoon@gmail.com> Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-02-28tools/thermal: tmon: silence 'set but not used' warningsBrian Norris1-0/+3
gcc complains about the 'cols' variable being unused. This is unavoidable, given the ncurses getmaxyx() macro-based API, which wants to assign to a variable directly, even when we're not going to use it. Warning: gcc -O1 -Wall -Wshadow -W -Wformat -Wimplicit-function-declaration -Wimplicit-int -fstack-protector -D VERSION=\"1.0\" -c -o tui.o tui.c tui.c: In function ‘show_dialogue’: tui.c:288:12: warning: variable ‘cols’ set but not used [-Wunused-but-set-variable] int rows, cols; ^ So, add a hack to get rid of that warning. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-02-28tools/thermal: tmon: use pkg-config to determine library dependenciesBrian Norris1-1/+10
Some distros (e.g., Arch Linux) don't package the tinfo library separately from ncurses, so don't unconditionally include it. Instead, use pkg-config. The $(STATIC) ugliness is to handle the reported build case from commit 6b533269fb25 ("tools/thermal: tmon: fix compilation errors when building statically"), where a developer wants to be able to build with: make LDFLAGS=-static which requires an additional pkg-config flag. Finally, support a lowest common denominator fallback (-lpanel -lncurses) for build systems that don't have pkg-config entries for ncurses. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-02-28tools/thermal: tmon: support cross-compilingBrian Norris1-2/+2
We might want to prepare CFLAGS outside of this Makefile, so don't overwrite its initial value. Then, support $(CROSS_COMPILE), so we can use a cross-compile toolchain. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-02-28tools/thermal: tmon: add .gitignoreBrian Norris1-0/+1
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-02-28tools/thermal: tmon: fixup tui windowing calculationsBrian Norris1-5/+16
The number of rows in the dialog vary according to the number of cooling devices. However, some of the windowing computations were assuming a fixed number of rows. This computation is OK when we have between 4 and 9 cooling devices (and they wrap to the next column), but with fewer devices, we end up printing off the end of the window. This unifies the row computation into a single function and uses that throughout the TUI code. This also accounts for increasing the number of rows when there are more than 9 total cooling devices. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-02-28tools/thermal: tmon: tui: don't hard-code dialog window size assumptionsBrian Norris1-4/+5
We can use the ncurses API to get the number of rows. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-02-28tools/thermal: tmon: add min/max macrosBrian Norris1-0/+12
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-02-28tools/thermal: tmon: add --target-temp parameterBrian Norris2-2/+14
If we launch in daemon mode (--daemon), we don't have the ncurses UI, but we might want to set the target temperature still. For example, someone might stick the following in their boot script: tmon --control intel_powerclamp --target-temp 90 --log --daemon This would turn on CPU idle injection when we're around 90 degrees celsius, and would log temperature and throttling info to /var/tmp/tmon.log. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-12-09calloc/xcalloc: Fix argument orderArjun Sreedharan1-3/+3
The calloc() and xcalloc() functions takes @nmemb first and then @size. Fix all w/ pattern "calloc\s*(\s*sizeof". Signed-off-by: Arjun Sreedharan <arjun024@gmail.com> Cc: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1417866043-1877-1-git-send-email-arjun024@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-07-01tmon: set umask to a reasonable valueNeil Horman1-1/+1
Currently, the tmon umask value is set to 0, which means whatever the permission mask in the shell are when starting tmon in daemon mode are what the permissions of any created files will be. We should likely set something more explicit, so lets go with the usual 022 Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-07-01tmon: Check log file for common secuirty issuesNeil Horman1-0/+24
The tmon logging system blindly opens its log file on a static path, making it very easy for someone to redirect that log information to inappropriate places or overwrite other users data. Do some easy checking to make sure we're not logging to a symlink or a file owned by another user. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-07-01tools/thermal: tmon: fix compilation errors when building staticallyJavi Merino1-1/+1
tmon fails to build statically with the following error: $ make LDFLAGS=-static gcc -O1 -Wall -Wshadow -W -Wformat -Wimplicit-function-declaration -Wimplicit-int -fstack-protector -D VERSION=\"1.0\" -static tmon.o tui.o sysfs.o pid.o -o tmon -lm -lpanel -lncursesw -lpthread tmon.o: In function `tmon_sig_handler': tmon.c:(.text+0x21): undefined reference to `stdscr' tmon.o: In function `tmon_cleanup': tmon.c:(.text+0xb9): undefined reference to `stdscr' tmon.c:(.text+0x11e): undefined reference to `stdscr' tmon.c:(.text+0x123): undefined reference to `keypad' tmon.c:(.text+0x12d): undefined reference to `nocbreak' tmon.o: In function `main': tmon.c:(.text+0x785): undefined reference to `stdscr' tmon.c:(.text+0x78a): undefined reference to `nodelay' tui.o: In function `setup_windows': tui.c:(.text+0x131): undefined reference to `stdscr' tui.c:(.text+0x176): undefined reference to `stdscr' tui.c:(.text+0x19f): undefined reference to `stdscr' tui.c:(.text+0x1cc): undefined reference to `stdscr' tui.c:(.text+0x1ff): undefined reference to `stdscr' tui.o:tui.c:(.text+0x229): more undefined references to `stdscr' follow tui.o: In function `show_cooling_device': [...] stdscr() and friends are in libtinfo (part of ncurses) so add it to the libraries that are linked in when compiling tmon to fix it. Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Javi Merino <javi.merino@arm.com> Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
2013-11-07tools/thermal: Introduce tmon, a tool for thermal subsystemJacob Pan8-0/+2160
Increasingly, Linux is running on thermally constrained devices. The simple thermal relationship between processor and fan has become past for modern computers. As hardware vendors cope with the thermal constraints on their products, more sensors are added, new cooling capabilities are introduced. The complexity of the thermal relationship can grow exponentially among cooling devices, zones, sensors, and trip points. They can also change dynamically. To expose such relationship to the userspace, Linux generic thermal layer introduced sysfs entry at /sys/class/thermal with a matrix of symbolic links, trip point bindings, and device instances. To traverse such matrix by hand is not a trivial task. Testing is also difficult in that thermal conditions are often exception cases that hard to reach in normal operations. TMON is conceived as a tool to help visualize, tune, and test the complex thermal subsystem. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>