| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull single ktest fix from Steven Rostedt:
"This just contains a single update by Satoru Takeuchi, which adds
CLOSE_CONSOLE_SIGNAL to the kvm.conf file, as the kvm guest requires a
different signal than a normal console uses"
* tag 'ktest-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: Set CLOSE_CONSOLE_SIGNAL in the kvm.conf
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull main powerpc updates from Ben Herrenschmidt:
"This time around, the powerpc merges are going to be a little bit more
complicated than usual.
This is the main pull request with most of the work for this merge
window. I will describe it a bit more further down.
There is some additional cpuidle driver work, however I haven't
included it in this tree as it depends on some work in tip/timer-core
which Thomas accidentally forgot to put in a topic branch. Since I
didn't want to carry all of that tip timer stuff in powerpc -next, I
setup a separate branch on top of Thomas tree with just that cpuidle
driver in it, and Stephen has been carrying that in next separately
for a while now. I'll send a separate pull request for it.
Additionally, two new pieces in this tree add users for a sysfs API
that Tejun and Greg have been deprecating in drivers-core-next.
Thankfully Greg reverted the patch that removes the old API so this
merge can happen cleanly, but once merged, I will send a patch
adjusting our new code to the new API so that Greg can send you the
removal patch.
Now as for the content of this branch, we have a lot of perf work for
power8 new counters including support for our new "nest" counters
(also called 24x7) under pHyp (not natively yet).
We have new functionality when running under the OPAL firmware
(non-virtualized or KVM host), such as access to the firmware error
logs and service processor dumps, system parameters and sensors, along
with a hwmon driver for the latter.
There's also a bunch of bug fixes accross the board, some LE fixes,
and a nice set of selftests for validating our various types of copy
loops.
On the Freescale side, we see mostly new chip/board revisions, some
clock updates, better support for machine checks and debug exceptions,
etc..."
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (70 commits)
powerpc/book3s: Fix CFAR clobbering issue in machine check handler.
powerpc/compat: 32-bit little endian machine name is ppcle, not ppc
powerpc/le: Big endian arguments for ppc_rtas()
powerpc: Use default set of netfilter modules (CONFIG_NETFILTER_ADVANCED=n)
powerpc/defconfigs: Enable THP in pseries defconfig
powerpc/mm: Make sure a local_irq_disable prevent a parallel THP split
powerpc: Rate-limit users spamming kernel log buffer
powerpc/perf: Fix handling of L3 events with bank == 1
powerpc/perf/hv_{gpci, 24x7}: Add documentation of device attributes
powerpc/perf: Add kconfig option for hypervisor provided counters
powerpc/perf: Add support for the hv 24x7 interface
powerpc/perf: Add support for the hv gpci (get performance counter info) interface
powerpc/perf: Add macros for defining event fields & formats
powerpc/perf: Add a shared interface to get gpci version and capabilities
powerpc/perf: Add 24x7 interface headers
powerpc/perf: Add hv_gpci interface header
powerpc: Add hvcalls for 24x7 and gpci (Get Performance Counter Info)
sysfs: create bin_attributes under the requested group
powerpc/perf: Enable BHRB access for EBB events
powerpc/perf: Add BHRB constraint and IFM MMCRA handling for EBB
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
"Main changes:
- Torture-test changes, including refactoring of rcutorture and
introduction of a vestigial locktorture.
- Real-time latency fixes.
- Documentation updates.
- Miscellaneous fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits)
rcu: Provide grace-period piggybacking API
rcu: Ensure kernel/rcu/rcu.h can be sourced/used stand-alone
rcu: Fix sparse warning for rcu_expedited from kernel/ksysfs.c
notifier: Substitute rcu_access_pointer() for rcu_dereference_raw()
Documentation/memory-barriers.txt: Clarify release/acquire ordering
rcutorture: Save kvm.sh output to log
rcutorture: Add a lock_busted to test the test
rcutorture: Place kvm-test-1-run.sh output into res directory
rcutorture: Rename TREE_RCU-Kconfig.txt
locktorture: Add kvm-recheck.sh plug-in for locktorture
rcutorture: Gracefully handle NULL cleanup hooks
locktorture: Add vestigial locktorture configuration
rcutorture: Introduce "rcu" directory level underneath configs
rcutorture: Rename kvm-test-1-rcu.sh
rcutorture: Remove RCU dependencies from ver_functions.sh API
rcutorture: Create CFcommon file for common Kconfig parameters
rcutorture: Create config files for scripted test-the-test testing
rcutorture: Add an rcu_busted to test the test
locktorture: Add a lock-torture kernel module
rcutorture: Abstract kvm-recheck.sh
...
|
|
A failed msgget causes the test to return an uninitialised value in ret.
Assign ret to -errno on error exit.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Turn Anton's memcpy / copy_tofrom_user test into something that can
live in tools/testing/selftests.
It requires one turd in arch/powerpc/lib/memcpy_64.S, but it's pretty
harmless IMHO.
We are sailing very close to the wind with the feature macros. We define
them to nothing, which currently means we get a few extra nops and
include the unaligned calls.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
|
As mentioned at commit 5a5d8e48449, we can't terminate 'virsh console'
with the default signal(INT). So it's better to set CLOSE_CONSOLE_SIGNAL
in the kvm.conf.
Link: http://lkml.kernel.org/r/8738jatylb.wl%satoru.takeuchi@gmail.com
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
[ Typo fixed by ]
Signed-off-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
This commit logs the progress text that kvm.sh outputs, improving
after-the-fact troubleshooting.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
The output of each kvm-test-1-run.sh script is placed into a file
whose name parallels that of the build directory. This means that
the kvm-test-1-run.sh output is overwritten by later run. This
commit therefore places the kvm-test-1-run.sh output into the
per-test-case directory in the "res" hierarchy.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
It used to be that:
git ls-files "*Kconfig*"
would find all Kconfig files and would only find Kconfig files. This
commit renames TREE_RCU-Kconfig.txt to TREE_RCU-kconfig.txt so that this
is once again true.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
This commit adds the kvm-recheck-lock.sh plug-in for locktorture to
print out lock-specific progress statistics.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
This commit adds a trivial set of configuration files for lock
torturing.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
This commit uses the standard software ploy of introducing another
level of indirection below the configs directory. This allows each
torture-test suite to have its own set of Kconfig files, boot parameters,
and version-specific scripts. Initially, we have only rcu, but lock
will follow soonish.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
The kvm-test-1-rcu.sh is not specific to RCU, so this commit renames it
to kvm-test-1-run.sh.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
The current set of functions in ver_functions.sh have APIs that are
specific to RCU. This commit therefore makes an RCU-independent function
that outputs version-specific boot arguments. This has the benefit that
a test-type-independent call in kvm-test-1-rcu.sh can now handle any type
of test, given a test-type-specific set of files in a configs directory.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
Currently, CONFIG_RCU_TORTURE_TEST=y is hardcoded into the
kvm-test-1-rcu.sh script and CONFIG_PRINTK_TIME=y is mentioned in each
and every configs file. This commit creates a CFcommon file for these
two Kconfig parameters, and modifies kvm-test-1-rcu.sh to copy this new
file into the .config file during the build. This change will allow
these scripts to operate on torture types other than just rcutorture.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
This commit adds a pair of files in the configs directory to allow
test-the-test runs of rcutorture via a "--configs BUSTED" argument to
the kvm.sh script.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
This commit creates a plug-in to allow kvm-recheck.sh to process
non-rcutorture console output.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
This commit prevents the results directory from being created for
dryruns. However, a script generated from a dryrun will create
the results directory should it be run.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org
|
|
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
This commit adds a "(!)" flag after the number of CPUs required by a
given test if that test requires more than the available number of CPUs.
Note that these flags appear only when the number of CPUs is specified
using the --cpus argument. In the absence of a --cpus argument, no
tests are flagged.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
Running the standard set of rcutorture tests on 24 CPUs results in
the following sub-optimal schedule:
----start batch----
TREE07 16
----start batch----
TREE08 16
SRCU-P 8
----start batch----
TREE01 8
TREE02 8
TREE03 8
----start batch----
TREE04 8
TREE05 8
TREE06 8
----start batch----
SRCU-N 4
TINY01 1
TINY02 1
TREE09 1
If one of the eight-CPU runs were to be moved into the first batch,
the test suite would complete in four batches rather than five.
This commit therefore uses a greedy algorithm to re-order the test
entries so that the sequential batching will produce an optimal schedule
in this case:
----start batch----
TREE07 16
SRCU-P 8
----start batch----
TREE08 16
TREE01 8
----start batch----
TREE02 8
TREE03 8
TREE04 8
----start batch----
TREE05 8
TREE06 8
SRCU-N 4
TINY01 1
TINY02 1
TREE09 1
Please note that this is still not an optimal bin-packing algorithm,
however, it does produce optimal solutions for most common scenarios.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
This commit fixes handling numbering of multiple runs of the same test
so as to disambiguate output.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
Actual rcutorture tests take considerable time and machine resources,
so it is inconvenient to actually do an rcutorture run when optimizing
the bin-packing algorithm. This commit therefore adds a --dryrun
argument, which defaults to doing a run, but for which "sched"
says to simply print the run schedule and "script" dumps the script
without running it.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
The message complains about a build directory when it should instead
be complaining about the results directory, so this commit fixes it.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
The rcutorture tests run by default range from using one CPU to using
sixteen of them. Therefore, rcutorture testing could be sped up
significantly simply by running the kernels in parallel. Building
them in parallel is not all that helpful: "make -j" is usually a
better bet. So this commit takes a new "--cpus" argument that
specifies how many CPUs rcutorture is permitted to use for its
parallel runs. The default of zero does sequential runs as before.
The bin-packing is minimal, and will be grossly suboptimal for
some configurations. However, powers of two work reasonably well.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
Both SRCU-P and SRCU-N specify eight CPUs, which results in four
iterations for a parallel run on 32 CPUs. This commit reduces SRCU-N
to four CPUs (but leaving SRCU-P at eight) to speed up parallel runs,
while maintaining essentially the same test coverage.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
Currently, most qemu flags are calculated in kvm-test-1-rcu.sh,
except that -nographics is set up by kvm.sh. This commit promotes
one-stop shopping by consolidating the determination of qemu flags into
kvm-test-1-rcu.sh.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
Parallel rcutorture runs is valuable on large systems, but it is not a
good idea to do (say) five builds in parallel if each build believes it
has the whole system at its disposal, especially if the system is shared.
It is also bad to restrict the build to (say) a single CPU just because
the corresponding rcutorture run uses only a single CPU. This commit
therefore adds a kvm-test-1-rcu.sh ability to pause after the build
completes, which will allow kvm.sh to do a number of builds serially
(with each build thus having the full system at its disposal), then
allow the rcutorture runs to proceed in parallel.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
Currently, most boot flags are calculated in kvm-test-1-rcu.sh, except
that rcutorture.test_no_idle_hz and rcutorture.verbose are set up by
kvm.sh. This commit promotes one-stop shopping by consolidating the
determination of boot flags into kvm-test-1-rcu.sh.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
Although the script name and arguments are logged in the results directory,
it is more convenient to see it in the output. This commit therefore
adds the output of this information.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
Sometime problems can manifest themselves as unusually slow grace periods.
This commit therefore prints the number of rcutorture updates during the
test and the number per second. These statistics are harvested from the
config.out and qemu-cmd files, and are silently omitted if these files
are not available, as would be the case if there was a build failure or
a boot-time hang.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
To help avoid an architecture failing to correctly check kernel/user
boundaries when handling copy_to_user, copy_from_user, put_user, or
get_user, perform some simple tests and fail to load if any of them
behave unexpectedly.
Specifically, this is to make sure there is a way to notice if things
like what was fixed in commit 8404663f81d2 ("ARM: 7527/1: uaccess:
explicitly check __user pointer when !CPU_USE_DOMAINS") ever regresses
again, for any architecture.
Additionally, adds new "user" selftest target, which loads this module.
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
- add RCU torture scripts/tooling
- static analysis improvements
- update RCU documentation
- miscellaneous fixes
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
rcu: Remove "extern" from function declarations in kernel/rcu/rcu.h
rcu: Remove "extern" from function declarations in include/linux/*rcu*.h
rcu/torture: Dynamically allocate SRCU output buffer to avoid overflow
rcu: Don't activate RCU core on NO_HZ_FULL CPUs
rcu: Warn on allegedly impossible rcu_read_unlock_special() from irq
rcu: Add an RCU_INITIALIZER for global RCU-protected pointers
rcu: Make rcu_assign_pointer's assignment volatile and type-safe
bonding: Use RCU_INIT_POINTER() for better overhead and for sparse
rcu: Add comment on evaluate-once properties of rcu_assign_pointer().
rcu: Provide better diagnostics for blocking in RCU callback functions
rcu: Improve SRCU's grace-period comments
rcu: Fix CONFIG_RCU_FANOUT_EXACT for odd fanout/leaf values
rcu: Fix coccinelle warnings
rcutorture: Stop tracking FSF's postal address
rcutorture: Move checkarg to functions.sh
rcutorture: Flag errors and warnings with color coding
rcutorture: Record results from repeated runs of the same test scenario
rcutorture: Test summary at end of run with less chattiness
rcutorture: Update comment in kvm.sh listing typical RCU trace events
rcutorture: Add tracing-enabled version of TREE08
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest updates from Steven Rostedt:
"Here's some basic updates to ktest.pl. They include:
- add config to modify the signal to terminate console
- update to documentation (missing some config options)
- add KERNEL_VERSION variable to use for other configs
- add '=~' to let configs eval other configs
- add BISECT_TRIES to run multiple tests per git bisect good"
* tag 'ktest-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: Add BISECT_TRIES to bisect test
ktest: Add eval '=~' command to modify variables in config file
ktest: Add special variable ${KERNEL_VERSION}
ktest: Add documentation of CLOSE_CONSOLE_SIGNAL
ktest: Make the signal to terminate the console configurable
|
|
For those cases that it takes several tries to hit a bug, it would be
useful for ktest.pl to try a test multiple times before it considers
the test as a pass. To accomplish this, BISECT_TRIES ktest config
option has been added. It is default to one, as most of the time a
bisect only needs to try a test once. But the user can now up this
to make ktest run a given test multiple times. The first failure
that is detected will set a bisect bad. It only repeats on success.
Note, as with all race bugs, there's no guarantee that if it succeeds,
it is really a good bisect. But it helps in case the bug is somewhat
reliable.
You can set BISECT_TRIES to zero, and all tests will be considered
good, unless you also set BISECT_MANUAL.
Suggested-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
With the added variable ${KERNEL_VERSION}, it is useful to be
able to use parts of it for other variables.
For example, if you want to create a warnings file for each major
kernel version to test sub versions against you can create
your warnings file with like this:
WARNINGS_FILE = warnings-file-${KERNEL_VERSION}
But this may add 3.8.12 or something, and we want all 3.8.* to
use the same file, and 3.10.* to use another file, and so on.
With the eval command we can, by adding:
WARNINGS_FILE =~ s/(-file-\d+\.\d+).*/$1/
Which will chop off the extra characters after the 3.8.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Add a special variable that can be used in other variables called
${KERNEL_VERSION}. This will embed the current kernel version into
the variable. For example:
WARNINGS_FILE = ${OUTPUT_DIR}/warnings-${KERNEL_VERSION}
If the current version is v3.8 then the WARNINGS_FILE will become
${OUTPUT_DIR}/warnings-v3.8
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
All of the rcutorture scripts has the usual GPL header, which contains
a long-obsolete postal address for FSF. To avoid the need to track the
FSF office's movements, this commit substitutes the URL where GPL may
be found.
Reported-by: Greg KH <gregkh@linuxfoundation.org>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
|
|
The output of the rcutorture scripts often requires interpretation, so
this commit simplifies this interpretation by tagging messages as
BUGs (colored red) or WARNINGs (colored yellow).
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
|
|
Repeatedly running a given test, for example, by repeating the name
as in "--configs "TREE08 TREE08 TREE08" records the results only of
the last run of this test. This is because the earlier results are
overwritten by the later results.
This commit therefore checks for earlier results, using numbered
file extensions to distinguish multiple runs. The earlier example
would therefore create directories TREE01, TREE01.2, and TREE01.3.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
|
|
The commit causes kvm.sh to invoke kvm-recheck.sh at the end of each
run, and causes kvm-recheck.sh to print only the name of the test, not
the full path to the corresponding Kconfig file.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
|
|
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
|
|
The TREE08 Kconfig fragment does not enable tracing, which is appropriate
for its test case. However, this can be inconvenient in cases where
TREE08 locates RCU bugs. This commit therefore adds a TREE08-T that
differs from TREE08 only in enabling CONFIG_RCU_TRACE.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
|
|
This commit adds the --kmake-arg to kvm.sh, which allows passing in
things like "V=1" to see the build commands, as well as enabling the
CROSS_COMPILE= make macro used for cross-building.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
|
|
This commit adds the --no-initrd argument to kvm.sh, which permits
initrd to be contained in a root partition specified by the --bootargs
argument. Without --no-initrd, the kernel build expects an initrd
directory in the same rcutorture directory that contains bin and configs.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
|
|
This commits adds the --qemu-args argument to kvm.sh that is required
to pass boot devices down through to qemu.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
|
|
This commit allows easy specification of trace_event lists, among other
things.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
|
