summaryrefslogtreecommitdiffstats
path: root/tools/testing/selftests
AgeCommit message (Collapse)AuthorFilesLines
2022-02-10selftests: net: cmsg_so_mark: test with SO_MARK set by setsockoptJakub Kicinski2-11/+31
Test if setting SO_MARK with setsockopt works and if cmsg takes precedence over it. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-10selftests: net: cmsg_so_mark: test ICMP and RAW socketsJakub Kicinski1-8/+16
Use new capabilities of cmsg_sender to test ICMP and RAW sockets, previously only UDP was tested. Before SO_MARK support was added to ICMPv6: # ./cmsg_so_mark.sh Case ICMP rejection returned 0, expected 1 FAIL - 1/12 cases failed After: # ./cmsg_so_mark.sh OK Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-10selftests: net: cmsg_sender: support icmp and raw socketsJakub Kicinski1-9/+55
Support sending fake ICMP(v6) messages and UDP via RAW sockets. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-10selftests: net: make cmsg_so_mark ready for more optionsJakub Kicinski2-26/+117
Parametrize the code so that it can support UDP and ICMP sockets in the future, and more cmsg types. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-10selftests: net: rename cmsg_so_markJakub Kicinski4-6/+6
Rename the file in prep for generalization. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-09Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski116-1235/+1965
Daniel Borkmann says: ==================== pull-request: bpf-next 2022-02-09 We've added 126 non-merge commits during the last 16 day(s) which contain a total of 201 files changed, 4049 insertions(+), 2215 deletions(-). The main changes are: 1) Add custom BPF allocator for JITs that pack multiple programs into a huge page to reduce iTLB pressure, from Song Liu. 2) Add __user tagging support in vmlinux BTF and utilize it from BPF verifier when generating loads, from Yonghong Song. 3) Add per-socket fast path check guarding from cgroup/BPF overhead when used by only some sockets, from Pavel Begunkov. 4) Continued libbpf deprecation work of APIs/features and removal of their usage from samples, selftests, libbpf & bpftool, from Andrii Nakryiko and various others. 5) Improve BPF instruction set documentation by adding byte swap instructions and cleaning up load/store section, from Christoph Hellwig. 6) Switch BPF preload infra to light skeleton and remove libbpf dependency from it, from Alexei Starovoitov. 7) Fix architecture-agnostic macros in libbpf for accessing syscall arguments from BPF progs for non-x86 architectures, from Ilya Leoshkevich. 8) Rework port members in struct bpf_sk_lookup and struct bpf_sock to be of 16-bit field with anonymous zero padding, from Jakub Sitnicki. 9) Add new bpf_copy_from_user_task() helper to read memory from a different task than current. Add ability to create sleepable BPF iterator progs, from Kenny Yu. 10) Implement XSK batching for ice's zero-copy driver used by AF_XDP and utilize TX batching API from XSK buffer pool, from Maciej Fijalkowski. 11) Generate temporary netns names for BPF selftests to avoid naming collisions, from Hangbin Liu. 12) Implement bpf_core_types_are_compat() with limited recursion for in-kernel usage, from Matteo Croce. 13) Simplify pahole version detection and finally enable CONFIG_DEBUG_INFO_DWARF5 to be selected with CONFIG_DEBUG_INFO_BTF, from Nathan Chancellor. 14) Misc minor fixes to libbpf and selftests from various folks. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (126 commits) selftests/bpf: Cover 4-byte load from remote_port in bpf_sk_lookup bpf: Make remote_port field in struct bpf_sk_lookup 16-bit wide libbpf: Fix compilation warning due to mismatched printf format selftests/bpf: Test BPF_KPROBE_SYSCALL macro libbpf: Add BPF_KPROBE_SYSCALL macro libbpf: Fix accessing the first syscall argument on s390 libbpf: Fix accessing the first syscall argument on arm64 libbpf: Allow overriding PT_REGS_PARM1{_CORE}_SYSCALL selftests/bpf: Skip test_bpf_syscall_macro's syscall_arg1 on arm64 and s390 libbpf: Fix accessing syscall arguments on riscv libbpf: Fix riscv register names libbpf: Fix accessing syscall arguments on powerpc selftests/bpf: Use PT_REGS_SYSCALL_REGS in bpf_syscall_macro libbpf: Add PT_REGS_SYSCALL_REGS macro selftests/bpf: Fix an endianness issue in bpf_syscall_macro test bpf: Fix bpf_prog_pack build HPAGE_PMD_SIZE bpf: Fix leftover header->pages in sparc and powerpc code. libbpf: Fix signedness bug in btf_dump_array_data() selftests/bpf: Do not export subtest as standalone test bpf, x86_64: Fail gracefully on bpf_jit_binary_pack_finalize failures ... ==================== Link: https://lore.kernel.org/r/20220209210050.8425-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-09selftests/bpf: Cover 4-byte load from remote_port in bpf_sk_lookupJakub Sitnicki1-0/+6
Extend the context access tests for sk_lookup prog to cover the surprising case of a 4-byte load from the remote_port field, where the expected value is actually shifted by 16 bits. Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20220209184333.654927-3-jakub@cloudflare.com
2022-02-08selftests/bpf: Test BPF_KPROBE_SYSCALL macroHengqi Chen2-0/+29
Add tests for the newly added BPF_KPROBE_SYSCALL macro. Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220207143134.2977852-3-hengqi.chen@gmail.com
2022-02-08selftests/bpf: Skip test_bpf_syscall_macro's syscall_arg1 on arm64 and s390Ilya Leoshkevich2-1/+7
These architectures can provide access to the first syscall argument only through PT_REGS_PARM1_CORE_SYSCALL(). Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220209021745.2215452-8-iii@linux.ibm.com
2022-02-08selftests/bpf: Use PT_REGS_SYSCALL_REGS in bpf_syscall_macroIlya Leoshkevich1-1/+1
Ensure that PT_REGS_SYSCALL_REGS works correctly. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220209021745.2215452-4-iii@linux.ibm.com
2022-02-08selftests/bpf: Fix an endianness issue in bpf_syscall_macro testIlya Leoshkevich1-1/+4
bpf_syscall_macro reads a long argument into an int variable, which produces a wrong value on big-endian systems. Fix by reading the argument into an intermediate long variable first. Fixes: 77fc0330dfe5 ("selftests/bpf: Add a test to confirm PT_REGS_PARM4_SYSCALL") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220209021745.2215452-2-iii@linux.ibm.com
2022-02-08selftests/bpf: Do not export subtest as standalone testHou Tao5-8/+8
Two subtests in ksyms_module.c are not qualified as static, so these subtests are exported as standalone tests in tests.h and lead to confusion for the output of "./test_progs -t ksyms_module". By using the following command ... grep "^void \(serial_\)\?test_[a-zA-Z0-9_]\+(\(void\)\?)" \ tools/testing/selftests/bpf/prog_tests/*.c | \ awk -F : '{print $1}' | sort | uniq -c | awk '$1 != 1' ... one finds out that other tests also have a similar problem, so fix these tests by marking subtests in these tests as static. Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20220208065444.648778-1-houtao1@huawei.com
2022-02-07ipv4: Reject routes specifying ECN bits in rtm_tosGuillaume Nault1-0/+76
Use the new dscp_t type to replace the fc_tos field of fib_config, to ensure IPv4 routes aren't influenced by ECN bits when configured with non-zero rtm_tos. Before this patch, IPv4 routes specifying an rtm_tos with some of the ECN bits set were accepted. However they wouldn't work (never match) as IPv4 normally clears the ECN bits with IPTOS_RT_MASK before doing a FIB lookup (although a few buggy code paths don't). After this patch, IPv4 routes specifying an rtm_tos with any ECN bit set is rejected. Note: IPv6 routes ignore rtm_tos altogether, any rtm_tos is accepted, but treated as if it were 0. Signed-off-by: Guillaume Nault <gnault@redhat.com> Acked-by: David Ahern <dsahern@kernel.org> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-07ipv4: Stop taking ECN bits into account in fib4-rulesGuillaume Nault1-1/+29
Use the new dscp_t type to replace the tos field of struct fib4_rule, so that fib4-rules consistently ignore ECN bits. Before this patch, fib4-rules did accept rules with the high order ECN bit set (but not the low order one). Also, it relied on its callers masking the ECN bits of ->flowi4_tos to prevent those from influencing the result. This was brittle and a few call paths still do the lookup without masking the ECN bits first. After this patch fib4-rules only compare the DSCP bits. ECN can't influence the result anymore, even if the caller didn't mask these bits. Also, fib4-rules now must have both ECN bits cleared or they will be rejected. Signed-off-by: Guillaume Nault <gnault@redhat.com> Acked-by: David Ahern <dsahern@kernel.org> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-07ipv6: Define dscp_t and stop taking ECN bits into account in fib6-rulesGuillaume Nault1-1/+29
Define a dscp_t type and its appropriate helpers that ensure ECN bits are not taken into account when handling DSCP. Use this new type to replace the tclass field of struct fib6_rule, so that fib6-rules don't get influenced by ECN bits anymore. Before this patch, fib6-rules didn't make any distinction between the DSCP and ECN bits. Therefore, rules specifying a DSCP (tos or dsfield options in iproute2) stopped working as soon a packets had at least one of its ECN bits set (as a work around one could create four rules for each DSCP value to match, one for each possible ECN value). After this patch fib6-rules only compare the DSCP bits. ECN doesn't influence the result anymore. Also, fib6-rules now must have the ECN bits cleared or they will be rejected. Signed-off-by: Guillaume Nault <gnault@redhat.com> Acked-by: David Ahern <dsahern@kernel.org> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-07selftests/bpf: Fix strict mode calculationMauricio Vásquez1-1/+1
"(__LIBBPF_STRICT_LAST - 1) & ~LIBBPF_STRICT_MAP_DEFINITIONS" is wrong as it is equal to 0 (LIBBPF_STRICT_NONE). Let's use "LIBBPF_STRICT_ALL & ~LIBBPF_STRICT_MAP_DEFINITIONS" now that the previous commit makes it possible in libbpf. Fixes: 93b8952d223a ("libbpf: deprecate legacy BPF map definitions") Signed-off-by: Mauricio Vásquez <mauricio@kinvolk.io> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220207145052.124421-4-mauricio@kinvolk.io
2022-02-07selftests/bpf: Fix tests to use arch-dependent syscall entry pointsNaveen N. Rao11-23/+34
Some of the tests are using x86_64 ABI-specific syscall entry points (such as __x64_sys_nanosleep and __x64_sys_getpgid). Update them to use architecture-dependent syscall entry names. Also update fexit_sleep test to not use BPF_PROG() so that it is clear that the syscall parameters aren't being accessed in the bpf prog. Note that none of the bpf progs in these tests are actually accessing any of the syscall parameters. The only exception is perfbuf_bench, which passes on the bpf prog context into bpf_perf_event_output() as a pointer to pt_regs, but that looks to be mostly ignored. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/e35f7051f03e269b623a68b139d8ed131325f7b7.1643973917.git.naveen.n.rao@linux.vnet.ibm.com
2022-02-07selftests/bpf: Use "__se_" prefix on architectures without syscall wrapperNaveen N. Rao1-1/+1
On architectures that don't use a syscall wrapper, sys_* function names are set as an alias of __se_sys_* functions. Due to this, there is no BTF associated with sys_* function names. This results in some of the test progs failing to load. Set the SYS_PREFIX to "__se_" to fix this issue. Fixes: 38261f369fb905 ("selftests/bpf: Fix probe_user test failure with clang build kernel") Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/013d632aacd3e41290445c0025db6a7055ec6e18.1643973917.git.naveen.n.rao@linux.vnet.ibm.com
2022-02-07selftests: forwarding: Add a test for pedit munge SIP and DIPDanielle Ratson1-0/+201
Add a test that checks that pedit adjusts source and destination addresses of IPv4 and IPv6 packets. Output example: $ ./pedit_ip.sh TEST: ping [ OK ] TEST: ping6 [ OK ] TEST: dev swp2 ingress pedit ip src set 198.51.100.1 [ OK ] TEST: dev swp3 egress pedit ip src set 198.51.100.1 [ OK ] TEST: dev swp2 ingress pedit ip dst set 198.51.100.1 [ OK ] TEST: dev swp3 egress pedit ip dst set 198.51.100.1 [ OK ] TEST: dev swp2 ingress pedit ip6 src set 2001:db8:2::1 [ OK ] TEST: dev swp3 egress pedit ip6 src set 2001:db8:2::1 [ OK ] TEST: dev swp2 ingress pedit ip6 dst set 2001:db8:2::1 [ OK ] TEST: dev swp3 egress pedit ip6 dst set 2001:db8:2::1 [ OK ] Signed-off-by: Danielle Ratson <danieller@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-04selftests: mptcp: set ip_mptcp in command lineGeliang Tang1-3/+9
This patch added a command line option '-i' for mptcp_join.sh to use 'ip mptcp' commands instead of using 'pm_nl_ctl' commands to deal with PM netlink. Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-04selftests: mptcp: add set_flags tests in pm_netlink.shGeliang Tang1-0/+18
This patch added the setting flags test cases, using both addr-based and id-based lookups for the setting address. The output looks like this: set flags (backup) [ OK ] (nobackup) [ OK ] (fullmesh) [ OK ] (nofullmesh) [ OK ] (backup,fullmesh) [ OK ] Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-04selftests: mptcp: add the id argument for set_flagsGeliang Tang1-21/+42
This patch added the id argument for setting the address flags in pm_nl_ctl. Usage: pm_nl_ctl set id 1 flags backup Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-04selftests: mptcp: add wrapper for setting flagsGeliang Tang1-3/+21
This patch implemented a new function named pm_nl_set_endpoint(), wrapped the PM netlink commands 'ip mptcp endpoint change flags' and 'pm_nl_ctl set flags' in it, and used a new argument 'ip_mptcp' to choose which one to use to set the flags of the PM endpoint. 'ip mptcp' used the ID number argument to find out the address to change flags, while 'pm_nl_ctl' used the address and port number arguments. So we need to parse the address ID from the PM dump output as well as the address and port number. Used this wrapper in do_transfer() instead of using the pm_nl_ctl command directly. Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-04selftests: mptcp: add wrapper for showing addrsGeliang Tang1-28/+50
This patch implemented a new function named pm_nl_show_endpoints(), wrapped the PM netlink commands 'ip mptcp endpoint show' and 'pm_nl_ctl dump' in it, used a new argument 'ip_mptcp' to choose which one to use to show all the PM endpoints. Used this wrapper in do_transfer() instead of using the pm_nl_ctl commands directly. The original 'pos+=5' in the remoing tests only works for the output of 'pm_nl_ctl show': id 1 flags subflow 10.0.1.1 It doesn't work for the output of 'ip mptcp endpoint show': 10.0.1.1 id 1 subflow So implemented a more flexible approach to get the address ID from the PM dump output to fit for both commands. Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-04selftests: mptcp: add ip mptcp wrappersGeliang Tang1-330/+407
This patch added four basic 'ip mptcp' wrappers: pm_nl_set_limits() pm_nl_add_endpoint() pm_nl_del_endpoint() pm_nl_flush_endpoint(). Wrapped the PM netlink commands 'ip mptcp' and 'pm_nl_ctl' in them, and used a new argument 'ip_mptcp' to choose which one to use for setting the PM limits, adding or deleting the PM endpoint. Used the wrappers in all the selftests in mptcp_join.sh instead of using the pm_nl_ctl commands directly. Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-04selftests: mptcp: add backup with port testcaseGeliang Tang1-5/+39
This patch added the backup testcase using an address with a port number. The original backup tests only work for the output of 'pm_nl_ctl dump' without the port number. It chooses the last item in the dump to parse the address in it, and in this case, the address is showed at the end of the item. But it doesn't work for the dump with the port number, in this case, the port number is showed at the end of the item, not the address. So implemented a more flexible approach to get the address and the port number from the dump to fit for the port number case. Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-04selftests: mptcp: add the port argument for set_flagsGeliang Tang1-1/+13
This patch added the port argument for setting the address flags in pm_nl_ctl. Usage: pm_nl_ctl set 10.0.2.1 flags backup port 10100 Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-04selftests/bpf: Test bpf_core_types_are_compat() functionality.Matteo Croce6-2/+74
Add several tests to check bpf_core_types_are_compat() functionality: - candidate type name exists and types match - candidate type name exists but types don't match - nested func protos at kernel recursion limit - nested func protos above kernel recursion limit. Such bpf prog is rejected during the load. Signed-off-by: Matteo Croce <mcroce@microsoft.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20220204005519.60361-3-mcroce@linux.microsoft.com
2022-02-03selftests: rtnetlink: Use more sensible tos valuesGuillaume Nault1-2/+2
Using tos 0x1 with 'ip route get <IPv4 address> ...' doesn't test much of the tos option handling: 0x1 just sets an ECN bit, which is cleared by inet_rtm_getroute() before doing the fib lookup. Let's use 0x10 instead, which is actually taken into account in the route lookup (and is less surprising for the reader). For consistency, use 0x10 for the IPv6 route lookup too (IPv6 currently doesn't clear ECN bits, but might do so in the future). Signed-off-by: Guillaume Nault <gnault@redhat.com> Link: https://lore.kernel.org/r/d61119e68d01ba7ef3ba50c1345a5123a11de123.1643815297.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-03selftests: fib offload: use sensible tos valuesGuillaume Nault1-6/+6
Although both iproute2 and the kernel accept 1 and 2 as tos values for new routes, those are invalid. These values only set ECN bits, which are ignored during IPv4 fib lookups. Therefore, no packet can actually match such routes. This selftest therefore only succeeds because it doesn't verify that the new routes do actually work in practice (it just checks if the routes are offloaded or not). It makes more sense to use tos values that don't conflict with ECN. This way, the selftest won't be affected if we later decide to warn or even reject invalid tos configurations for new routes. Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/5e43b343720360a1c0e4f5947d9e917b26f30fbf.1643826556.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski26-202/+464
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-03Merge tag 'net-5.17-rc3' of ↵Linus Torvalds4-8/+229
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf, netfilter, and ieee802154. Current release - regressions: - Partially revert "net/smc: Add netlink net namespace support", fix uABI breakage - netfilter: - nft_ct: fix use after free when attaching zone template - nft_byteorder: track register operations Previous releases - regressions: - ipheth: fix EOVERFLOW in ipheth_rcvbulk_callback - phy: qca8081: fix speeds lower than 2.5Gb/s - sched: fix use-after-free in tc_new_tfilter() Previous releases - always broken: - tcp: fix mem under-charging with zerocopy sendmsg() - tcp: add missing tcp_skb_can_collapse() test in tcp_shift_skb_data() - neigh: do not trigger immediate probes on NUD_FAILED from neigh_managed_work, avoid a deadlock - bpf: use VM_MAP instead of VM_ALLOC for ringbuf, avoid KASAN false-positives - netfilter: nft_reject_bridge: fix for missing reply from prerouting - smc: forward wakeup to smc socket waitqueue after fallback - ieee802154: - return meaningful error codes from the netlink helpers - mcr20a: fix lifs/sifs periods - at86rf230, ca8210: stop leaking skbs on error paths - macsec: add missing un-offload call for NETDEV_UNREGISTER of parent - ax25: add refcount in ax25_dev to avoid UAF bugs - eth: mlx5e: - fix SFP module EEPROM query - fix broken SKB allocation in HW-GRO - IPsec offload: fix tunnel mode crypto for non-TCP/UDP flows - eth: amd-xgbe: - fix skb data length underflow - ensure reset of the tx_timer_active flag, avoid Tx timeouts - eth: stmmac: fix runtime pm use in stmmac_dvr_remove() - eth: e1000e: handshake with CSME starts from Alder Lake platforms" * tag 'net-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits) ax25: fix reference count leaks of ax25_dev net: stmmac: ensure PTP time register reads are consistent net: ipa: request IPA register values be retained dt-bindings: net: qcom,ipa: add optional qcom,qmp property tools/resolve_btfids: Do not print any commands when building silently bpf: Use VM_MAP instead of VM_ALLOC for ringbuf net, neigh: Do not trigger immediate probes on NUD_FAILED from neigh_managed_work tcp: add missing tcp_skb_can_collapse() test in tcp_shift_skb_data() net: sparx5: do not refer to skb after passing it on Partially revert "net/smc: Add netlink net namespace support" net/mlx5e: Avoid field-overflowing memcpy() net/mlx5e: Use struct_group() for memcpy() region net/mlx5e: Avoid implicit modify hdr for decap drop rule net/mlx5e: IPsec: Fix tunnel mode crypto offload for non TCP/UDP traffic net/mlx5e: IPsec: Fix crypto offload for non TCP/UDP encapsulated traffic net/mlx5e: Don't treat small ceil values as unlimited in HTB offload net/mlx5: E-Switch, Fix uninitialized variable modact net/mlx5e: Fix handling of wrong devices during bond netevent net/mlx5e: Fix broken SKB allocation in HW-GRO net/mlx5e: Fix wrong calculation of header index in HW_GRO ...
2022-02-03Merge tag 'linux-kselftest-fixes-5.17-rc3' of ↵Linus Torvalds14-177/+201
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fixes from Shuah Khan: "Important fixes to several tests and documentation clarification on running mainline kselftest on stable releases. A few notable fixes: - fix kselftest run hang due to child processes that haven't been terminated. Fix signals all child processes - fix false pass/fail results from vdso_test_abi, openat2, mincore - build failures when using -j (multiple jobs) option - exec test build failure due to incorrect build rule for a run-time created "pipe" - zram test fixes related to interaction with zram-generator to make sure zram test to coordinate deleted with zram-generator - zram test compression ratio calculation fix and skipping max_comp_streams. - increasing rtc test timeout - cpufreq test to write test results to stdout which will necessary on automated test systems" * tag 'linux-kselftest-fixes-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kselftest: Fix vdso_test_abi return status selftests: skip mincore.check_file_mmap when fs lacks needed support selftests: openat2: Skip testcases that fail with EOPNOTSUPP selftests: openat2: Add missing dependency in Makefile selftests: openat2: Print also errno in failure messages selftests: futex: Use variable MAKE instead of make selftests/exec: Remove pipe from TEST_GEN_FILES selftests/zram: Adapt the situation that /dev/zram0 is being used selftests/zram01.sh: Fix compression ratio calculation selftests/zram: Skip max_comp_streams interface on newer kernel docs/kselftest: clarify running mainline tests on stables kselftest: signal all child processes selftests: cpufreq: Write test output to stdout as well selftests: rtc: Increase test timeout so that all tests run
2022-02-03Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski1-1/+0
Daniel Borkmann says: ==================== pull-request: bpf 2022-02-03 We've added 6 non-merge commits during the last 10 day(s) which contain a total of 7 files changed, 11 insertions(+), 236 deletions(-). The main changes are: 1) Fix BPF ringbuf to allocate its area with VM_MAP instead of VM_ALLOC flag which otherwise trips over KASAN, from Hou Tao. 2) Fix unresolved symbol warning in resolve_btfids due to LSM callback rename, from Alexei Starovoitov. 3) Fix a possible race in inc_misses_counter() when IRQ would trigger during counter update, from He Fengqing. 4) Fix tooling infra for cross-building with clang upon probing whether gcc provides the standard libraries, from Jean-Philippe Brucker. 5) Fix silent mode build for resolve_btfids, from Nathan Chancellor. 6) Drop unneeded and outdated lirc.h header copy from tooling infra as BPF does not require it anymore, from Sean Young. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: tools/resolve_btfids: Do not print any commands when building silently bpf: Use VM_MAP instead of VM_ALLOC for ringbuf tools: Ignore errors from `which' when searching a GCC toolchain tools headers UAPI: remove stale lirc.h bpf: Fix possible race in inc_misses_counter bpf: Fix renaming task_getsecid_subj->current_getsecid_subj. ==================== Link: https://lore.kernel.org/r/20220203155815.25689-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-03selftests/bpf: Add a selftest for invalid func btf with btf decl_tagYonghong Song1-0/+19
Added a selftest similar to [1] which exposed a kernel bug. Without the fix in the previous patch, the similar kasan error will appear. [1] https://lore.kernel.org/bpf/0000000000009b6eaa05d71a8c06@google.com/ Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20220203191732.742285-1-yhs@fb.com
2022-02-03selftests/bpf: Redo the switch to new libbpf XDP APIsAndrii Nakryiko7-50/+47
Switch to using new bpf_xdp_*() APIs across all selftests. Take advantage of a more straightforward and user-friendly semantics of old_prog_fd (0 means "don't care") in few places. This is a redo of 544356524dd6 ("selftests/bpf: switch to new libbpf XDP APIs"), which was previously reverted to minimize conflicts during bpf and bpf-next tree merge. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20220202225916.3313522-6-andrii@kernel.org
2022-02-03selftests/bpf: Remove usage of deprecated feature probing APIsAndrii Nakryiko2-3/+3
Switch to libbpf_probe_*() APIs instead of the deprecated ones. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20220202225916.3313522-5-andrii@kernel.org
2022-02-03selftests: net: bridge: Parameterize ageing timeoutTobias Waldekranz4-4/+9
Allow the ageing timeout that is set on bridges to be customized from forwarding.config. This allows the tests to be run on hardware which does not support a 10s timeout (e.g. mv88e6xxx). Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-03selftests: mptcp: add fullmesh setting testsGeliang Tang1-6/+43
This patch added the fullmesh setting and clearing selftests in mptcp_join.sh. Now we can set both backup and fullmesh flags, so avoid using the words 'backup' and 'bkup'. Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-03selftests: mptcp: set fullmesh flag in pm_nl_ctlGeliang Tang1-3/+5
This patch added the fullmesh flag setting and clearing support in pm_nl_ctl: # pm_nl_ctl set ip flags fullmesh # pm_nl_ctl set ip flags nofullmesh Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-02selftests/bpf: Migrate from bpf_prog_test_run_xattrDelyan Kratunov14-283/+218
bpf_prog_test_run_xattr is being deprecated in favor of the OPTS-based bpf_prog_test_run_opts. We end up unable to use CHECK_ATTR so replace usages with ASSERT_* calls. Also, prog_run_xattr is now prog_run_opts. Signed-off-by: Delyan Kratunov <delyank@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220202235423.1097270-3-delyank@fb.com
2022-02-02selftests/bpf: Migrate from bpf_prog_test_runDelyan Kratunov38-523/+649
bpf_prog_test_run is being deprecated in favor of the OPTS-based bpf_prog_test_run_opts. We end up unable to use CHECK in most cases, so replace usages with ASSERT_* calls. Signed-off-by: Delyan Kratunov <delyank@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220202235423.1097270-2-delyank@fb.com
2022-02-01selftests/bpf: Update cpumap/devmap sec_nameLorenzo Bianconi5-5/+5
Substitute deprecated xdp_cpumap and xdp_devmap sec_name with xdp/cpumap and xdp/devmap respectively in bpf kselftests. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/9a4286cd36781e2c31ba3773bfdcf45cf1bbaa9e.1643727185.git.lorenzo@kernel.org
2022-02-01selftests: fib rule: Don't echo modified sysctlsGuillaume Nault1-3/+3
Run sysctl in quiet mode. Echoing the modified sysctl doesn't bring any useful information. Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-01selftests: fib rule: Log test descriptionGuillaume Nault1-4/+6
All callers of fib_rule6_test_match_n_redirect() and fib_rule4_test_match_n_redirect() pass a third argument containing a description of the test being run. Instead of ignoring this argument, let's use it for logging instead of printing a truncated version of the command. Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-01selftests: fib rule: Drop erroneous TABLE variableGuillaume Nault1-2/+2
The fib_rule6_del_by_pref() and fib_rule4_del_by_pref() functions use an uninitialised $TABLE variable. They should use $RTABLE instead. This doesn't alter the result of the test, as it just makes the grep command less specific (but since the script always uses the same table number, that doesn't really matter). Let's fix it anyway and, while there, specify the filtering parameters directly in 'ip -X rule show' to avoid the extra grep command entirely. Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-01selftests: fib rule: Make 'getmatch' and 'match' local variablesGuillaume Nault1-0/+6
Let's restrict the scope of these variables to avoid possible interferences. Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-31selftests/bpf: Extend verifier and bpf_sock tests for dst_port loadsJakub Sitnicki3-20/+160
Add coverage to the verifier tests and tests for reading bpf_sock fields to ensure that 32-bit, 16-bit, and 8-bit loads from dst_port field are allowed only at intended offsets and produce expected values. While 16-bit and 8-bit access to dst_port field is straight-forward, 32-bit wide loads need be allowed and produce a zero-padded 16-bit value for backward compatibility. Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/r/20220130115518.213259-3-jakub@cloudflare.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-01-31kselftest: Fix vdso_test_abi return statusVincenzo Frascino1-73/+62
vdso_test_abi contains a batch of tests that verify the validity of the vDSO ABI. When a vDSO symbol is not found the relevant test is skipped reporting KSFT_SKIP. All the tests return values are then added in a single variable which is checked to verify failures. This approach can have side effects which result in reporting the wrong kselftest exit status. Fix vdso_test_abi verifying the return code of each test separately. Cc: Shuah Khan <shuah@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Reported-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-01-31selftests/net: timestamping: Fix bind_phc checkGerhard Engleder1-2/+2
timestamping checks socket options during initialisation. For the field bind_phc of the socket option SO_TIMESTAMPING it expects the value -1 if PHC is not bound. Actually the value of bind_phc is 0 if PHC is not bound. This results in the following output: SIOCSHWTSTAMP: tx_type 0 requested, got 0; rx_filter 0 requested, got 0 SO_TIMESTAMP 0 SO_TIMESTAMPNS 0 SO_TIMESTAMPING flags 0, bind phc 0 not expected, flags 0, bind phc -1 This is fixed by setting default value and expected value of bind_phc to 0. Fixes: 2214d7032479 ("selftests/net: timestamping: support binding PHC") Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 15:14:14 +0000