summaryrefslogtreecommitdiffstats
path: root/tools/testing/selftests/net
AgeCommit message (Collapse)AuthorFilesLines
2021-01-19selftests: net: fib_tests: remove duplicate log testHangbin Liu1-1/+0
The previous test added an address with a specified metric and check if correspond route was created. I somehow added two logs for the same test. Remove the duplicated one. Reported-by: Antoine Tenart <atenart@redhat.com> Fixes: 0d29169a708b ("selftests/net/fib_tests: update addr_metric_test for peer route testing") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20210119025930.2810532-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09selftests/tls: fix selftests after adding ChaCha20-Poly1305Vadim Fedorenko1-2/+2
TLS selftests where broken because of wrong variable types used. Fix it by changing u16 -> uint16_t Fixes: 4f336e88a870 ("selftests/tls: add CHACHA20-POLY1305 to tls selftests") Reported-by: kernel test robot <oliver.sang@intel.com> Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Link: https://lore.kernel.org/r/1610141865-7142-1-git-send-email-vfedorenko@novek.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07selftests: fib_nexthops: Fix wrong mausezahn invocationIdo Schimmel1-1/+1
For IPv6 traffic, mausezahn needs to be invoked with '-6'. Otherwise an error is returned: # ip netns exec me mausezahn veth1 -B 2001:db8:101::2 -A 2001:db8:91::1 -c 0 -t tcp "dp=1-1023, flags=syn" Failed to set source IPv4 address. Please check if source is set to a valid IPv4 address. Invalid command line parameters! Fixes: 7c741868ceab ("selftests: Add torture tests to nexthop tests") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07tools: selftests: add test for changing routes with PTMU exceptionsSean Tranchetti1-2/+69
Adds new 2 new tests to the PTMU script: pmtu_ipv4/6_route_change. These tests explicitly test for a recently discovered problem in the IPv6 routing framework where PMTU exceptions were not properly released when replacing a route via "ip route change ...". After creating PMTU exceptions, the route from the device A to R1 will be replaced with a new route, then device A will be deleted. If the PMTU exceptions were properly cleaned up by the kernel, this device deletion will succeed. Otherwise, the unregistration of the device will stall, and messages such as the following will be logged in dmesg: unregister_netdevice: waiting for veth_A-R1 to become free. Usage count = 4 Signed-off-by: Sean Tranchetti <stranche@codeaurora.org> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/1609892546-11389-2-git-send-email-stranche@quicinc.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-05selftests: fix the return value for UDP GRO testPo-Hsu Lin1-0/+34
The udpgro.sh will always return 0 (unless the bpf selftest was not build first) even if there are some failed sub test-cases. Therefore the kselftest framework will report this case is OK. Check and return the exit status of each test to make it easier to spot real failures. Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-22Merge tag 'kbuild-v5.11' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Use /usr/bin/env for shebang lines in scripts - Remove useless -Wnested-externs warning flag - Update documents - Refactor log handling in modpost - Stop building modules without MODULE_LICENSE() tag - Make the insane combination of 'static' and EXPORT_SYMBOL an error - Improve genksyms to handle _Static_assert() * tag 'kbuild-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: Documentation/kbuild: Document platform dependency practises Documentation/kbuild: Document COMPILE_TEST dependencies genksyms: Ignore module scoped _Static_assert() modpost: turn static exports into error modpost: turn section mismatches to error from fatal() modpost: change license incompatibility to error() from fatal() modpost: turn missing MODULE_LICENSE() into error modpost: refactor error handling and clarify error/fatal difference modpost: rename merror() to error() kbuild: don't hardcode depmod path kbuild: doc: document subdir-y syntax kbuild: doc: clarify the difference between extra-y and always-y kbuild: doc: split if_changed explanation to a separate section kbuild: doc: merge 'Special Rules' and 'Custom kbuild commands' sections kbuild: doc: fix 'List directories to visit when descending' section kbuild: doc: replace arch/$(ARCH)/ with arch/$(SRCARCH)/ kbuild: doc: update the description about kbuild Makefiles Makefile.extrawarn: remove -Wnested-externs warning tweewide: Fix most Shebang lines
2020-12-17mptcp: push pending frames when subflow has free spacePaolo Abeni1-3/+3
When multiple subflows are active, we can receive a window update on subflow with no write space available. MPTCP will try to push frames on such subflow and will fail. Pending frames will be pushed only after receiving a window update on a subflow with some wspace available. Overall the above could lead to suboptimal aggregate bandwidth usage. Instead, we should try to push pending frames as soon as the subflow reaches both conditions mentioned above. We can finally enable self-tests with asymmetric links, as the above makes them finally pass. Fixes: 6f8a612a33e4 ("mptcp: keep track of advertised windows right edge") Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14selftests: test_vxlan_under_vrf: mute unnecessary error messagePo-Hsu Lin1-1/+1
The cleanup function in this script that tries to delete hv-1 / hv-2 vm-1 / vm-2 netns will generate some uncessary error messages: Cannot remove namespace file "/run/netns/hv-2": No such file or directory Cannot remove namespace file "/run/netns/vm-1": No such file or directory Cannot remove namespace file "/run/netns/vm-2": No such file or directory Redirect it to /dev/null like other commands in the cleanup function to reduce confusion. Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Link: https://lore.kernel.org/r/20201211042420.16411-1-po-hsu.lin@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14selftests: mptcp: add the flush addrs testcaseGeliang Tang1-14/+36
This patch added the flush addrs testcase. In do_transfer, if the number of removing addresses is less than 8, use the del addr command to remove the addresses one by one. If the number is more than 8, use the flush addrs command to remove the addresses. Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-0/+98
xdp_return_frame_bulk() needs to pass a xdp_buff to __xdp_return(). strlcpy got converted to strscpy but here it makes no functional difference, so just keep the right code. Conflicts: net/netfilter/nf_tables_api.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-10selftests: fix poll error in udpgro.shPaolo Abeni1-0/+3
The test program udpgso_bench_rx always invokes the poll() syscall with a timeout of 10ms. If a larger timeout is specified via the command line, udpgso_bench_rx is supposed to do multiple poll() calls till the timeout is expired or an event is received. Currently the poll() loop errors out after the first invocation with no events, and may causes self-tests failure alike: failed GRO with custom segment size ./udpgso_bench_rx: poll: 0x0 expected 0x1 This change addresses the issue allowing the poll() loop to consume all the configured timeout. Fixes: ada641ff6ed3 ("selftests: fixes for UDP GRO") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-08selftests: forwarding: Add Q-in-VNI testPetr Machata1-0/+347
Add test to check Q-in-VNI traffic. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-08tweewide: Fix most Shebang linesFinn Behrens1-1/+1
Change every shebang which does not need an argument to use /usr/bin/env. This is needed as not every distro has everything under /usr/bin, sometimes not even bash. Signed-off-by: Finn Behrens <me@kloenk.de> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-12-05vrf: packets with lladdr src needs dst at input with orig_iif when needs strictStephen Suryaputra1-0/+95
Depending on the order of the routes to fe80::/64 are installed on the VRF table, the NS for the source link-local address of the originator might be sent to the wrong interface. This patch ensures that packets with link-local addr source is doing a lookup with the orig_iif when the destination addr indicates that it is strict. Add the reproducer as a use case in self test script fcnal-test.sh. Fixes: b4869aa2f881 ("net: vrf: ipv6 support for local traffic to local addresses") Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20201204030604.18828-1-ssuryaextr@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04selftests: forwarding: Add MPLS L2VPN testGuillaume Nault3-0/+196
Connect hosts H1 and H2 using two intermediate encapsulation routers (LER1 and LER2). These routers encapsulate traffic from the hosts, including the original Ethernet header, into MPLS. Use ping to test reachability between H1 and H2. Signed-off-by: Guillaume Nault <gnault@redhat.com> Link: https://lore.kernel.org/r/625f5c1aafa3a8085f8d3e082d680a82e16ffbaa.1606918980.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04selftests: add selftest for the SRv6 End.DT6 (VRF) behaviorAndrea Mayer1-0/+502
this selftest is designed for evaluating the new SRv6 End.DT6 (VRF) behavior used, in this example, for implementing IPv6 L3 VPN use cases. Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Signed-off-by: Paolo Lungaroni <paolo.lungaroni@cnit.it> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04selftests: add selftest for the SRv6 End.DT4 behaviorAndrea Mayer1-0/+494
this selftest is designed for evaluating the new SRv6 End.DT4 behavior used, in this example, for implementing IPv4 L3 VPN use cases. Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27selftests/tls: add CHACHA20-POLY1305 to tls selftestsVadim Fedorenko1-7/+33
Add new cipher as a variant of standard tls selftests Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-24selftests: forwarding: Add blackhole nexthops testsIdo Schimmel1-1/+57
Test that IPv4 and IPv6 ping fail when the route is using a blackhole nexthop or a group with a blackhole nexthop. Test that ping passes when the route starts using a valid nexthop. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-20selftests: mptcp: add ADD_ADDR IPv6 test casesGeliang Tang1-1/+69
This patch added IPv6 support for do_transfer, and the test cases for ADD_ADDR IPv6. Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-20selftests: mptcp: add link failure test caseFlorian Westphal1-22/+82
Add a test case where a link fails with multiple subflows. The expectation is that MPTCP will transmit any data that could not be delivered via the failed link on another subflow. Co-developed-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-20selftests: forwarding: Add multipath tunneling nexthop testIdo Schimmel1-0/+356
Add a nexthop objects version of gre_multipath.sh. Unlike the original test, it also tests IPv6 overlay which is not possible with the legacy nexthop implementation. See commit 9a2ad3623868 ("selftests: forwarding: gre_multipath: Drop IPv6 tests") for more info. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-20selftests: forwarding: Add device-only nexthop testIdo Schimmel1-0/+160
In a similar fashion to router_multipath.sh and its nexthop objects version router_mpath_nh.sh, create a nexthop objects version of router.sh. It reuses the same topology, but uses device-only nexthop objects instead of legacy ones. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-20selftests: forwarding: Test IPv4 routes with IPv6 link-local nexthopsIdo Schimmel1-0/+11
In addition to IPv4 multipath tests with IPv4 nexthops, also test IPv4 multipath with nexthops that use IPv6 link-local addresses. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-20selftests: forwarding: Do not configure nexthop objects twiceIdo Schimmel1-1/+0
routing_nh_obj() is used to configure the nexthop objects employed by the test, but it is called twice resulting in "RTNETLINK answers: File exists" messages. Remove the first call, so that the function is only called after setup_wait(), when all the interfaces are up and ready. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12selftests: set conf.all.rp_filter=0 in bareudp.shGuillaume Nault1-0/+2
When working on the rp_filter problem, I didn't realise that disabling it on the network devices didn't cover all cases: rp_filter could also be enabled globally in the namespace, in which case it would drop packets, even if the net device has rp_filter=0. Fixes: 1ccd58331f6f ("selftests: disable rp_filter when testing bareudp") Fixes: bbbc7aa45eef ("selftests: add test script for bareudp tunnels") Signed-off-by: Guillaume Nault <gnault@redhat.com> Link: https://lore.kernel.org/r/f2d459346471f163b239aa9d63ce3e2ba9c62895.1605107012.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12selftests: pmtu.sh: improve the test result processingPo-Hsu Lin1-1/+14
This test will treat all non-zero return codes as failures, it will make the pmtu.sh test script being marked as FAILED when some sub-test got skipped. Improve the result processing by * Only mark the whole test script as SKIP when all of the sub-tests were skipped * If the sub-tests were either passed or skipped, the overall result will be PASS * If any of them has failed with return code 1 or anything bad happened (e.g. return code 127 for command not found), the overall result will be FAIL Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12selftests: pmtu.sh: use $ksft_skip for skipped return codePo-Hsu Lin1-32/+32
This test uses return code 2 as a hard-coded skipped state, let's use the kselftest framework skip code variable $ksft_skip instead to make it more readable and easier to maintain. Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-10selftests: disable rp_filter when testing bareudpGuillaume Nault1-0/+6
Some systems have rp_filter=1 as default configuration. This breaks bareudp.sh as the intermediate namespaces handle part of the routing with regular IPv4 routes but the reverse path is done with tc (flower/tunnel_key/mirred). Signed-off-by: Guillaume Nault <gnault@redhat.com> Link: https://lore.kernel.org/r/28140b7d20161e4f766b558018fe2718f9bc1117.1604767577.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-09selftests/net: test max_num_members, fanout_args in psock_fanoutTanner Love1-3/+69
Add an additional control test that verifies: -specifying two different max_num_members values fails -specifying max_num_members > PACKET_FANOUT_MAX fails In datapath tests, set max_num_members to PACKET_FANOUT_MAX. Signed-off-by: Tanner Love <tannerlove@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04selftests: mptcp: add ADD_ADDR timeout test caseGeliang Tang2-24/+80
This patch added the test case for retransmitting ADD_ADDR when timeout occurs. It set NS1's add_addr_timeout to 1 second, and drop NS2's ADD_ADDR echo packets. Here we need to slow down the transfer process of all data to let the ADD_ADDR suboptions can be retransmitted three times. So we added a new parameter "speed" for do_transfer, it can be set with fast or slow. We also added three new optional parameters for run_tests, and dropped run_remove_tests function. Since we added the netfilter rules in this test case, we need to update the "config" file. Suggested-by: Matthieu Baerts <matthieu.baerts@tessares.net> Suggested-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04selftests: net: bridge: add test for mldv2 *,g auto-addNikolay Aleksandrov1-1/+30
When we have *,G ports in exclude mode and a new S,G,port is added the kernel has to automatically create an S,G entry for each exclude port to get proper forwarding. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04selftests: net: bridge: add test for mldv2 exclude timeoutNikolay Aleksandrov1-1/+47
Test that when a group in exclude mode expires it changes mode to include and the blocked entries are deleted. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04selftests: net: bridge: add test for mldv2 exc -> block reportNikolay Aleksandrov1-1/+30
The test checks for the following case: Router State Report Received New Router State Actions EXCLUDE (X,Y) BLOCK (A) EXCLUDE (X+(A-Y),Y) (A-X-Y) = Filter Timer Send Q(MA,A-Y) Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04selftests: net: bridge: add test for mldv2 inc -> block reportNikolay Aleksandrov1-1/+36
The test checks for the following case: Router State Report Received New Router State Actions INCLUDE (A) BLOCK (B) INCLUDE (A) Send Q(MA,A*B) Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04selftests: net: bridge: add test for mldv2 exc -> to_exclude reportNikolay Aleksandrov1-1/+29
The test checks for the following case: Router State Report Received New Router State Actions EXCLUDE (X,Y) TO_EX (A) EXCLUDE (A-Y,Y*A) (A-X-Y) = Filter Timer Delete (X-A) Delete (Y-A) Send Q(MA,A-Y) Filter Timer=MALI Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04selftests: net: bridge: add test for mldv2 exc -> is_exclude reportNikolay Aleksandrov1-1/+30
The test checks for the following case: Router State Report Received New Router State Actions EXCLUDE (X,Y) IS_EX (A) EXCLUDE (A-Y, Y*A) (A-X-Y)=MALI Delete (X-A) Delete (Y-A) Filter Timer=MALI Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04selftests: net: bridge: add test for mldv2 exc -> is_include reportNikolay Aleksandrov1-1/+29
The test checks for the following case: Router State Report Received New Router State Actions EXCLUDE (X,Y) IS_IN (A) EXCLUDE (X+A, Y-A) (A)=MALI Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04selftests: net: bridge: add test for mldv2 exc -> allow reportNikolay Aleksandrov1-1/+29
The test checks for the following case: Router State Report Received New Router State Actions EXCLUDE (X,Y) ALLOW (A) EXCLUDE (X+A,Y-A) (A)=MALI Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04selftests: net: bridge: add test for mldv2 inc -> to_exclude reportNikolay Aleksandrov1-1/+55
The test checks for the following case: Router State Report Received New Router State Actions INCLUDE (A) TO_EX (B) EXCLUDE (A*B,B-A) (B-A)=0 Delete (A-B) Send Q(MA,A*B) Filter Timer=MALI Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04selftests: net: bridge: add test for mldv2 inc -> is_exclude reportNikolay Aleksandrov1-1/+53
The test checks for the following case: Router State Report Received New Router State Actions INCLUDE (A) IS_EX (B) EXCLUDE (A*B, B-A) (B-A)=0 Delete (A-B) Filter Timer=MALI Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04selftests: net: bridge: add test for mldv2 inc -> is_include reportNikolay Aleksandrov1-1/+28
The test checks for the following case: Router State Report Received New Router State Actions INCLUDE (A) IS_IN (B) INCLUDE (A+B) (B)=MALI Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04selftests: net: bridge: add test for mldv2 inc -> allow reportNikolay Aleksandrov1-1/+28
The test checks for the following case: Router State Report Received New Router State Actions INCLUDE (A) ALLOW (B) INCLUDE (A+B) (B)=MALI Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04selftests: net: bridge: add initial MLDv2 include testNikolay Aleksandrov1-0/+146
Add the initial setup for MLDv2 tests with the first test of a simple is_include report. For MLDv2 we need to setup the bridge properly and we also send the full precooked packets instead of relying on mausezahn to fill in some parts. For verification we use the generic S,G state checking functions from lib.sh. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04selftests: net: bridge: factor out and rename sg state functionsNikolay Aleksandrov2-123/+123
Factor out S,G entry state checking functions for existence, forwarding, blocking and timer to lib.sh so they can be later used by MLDv2 tests. Add brmcast_ suffix to their name to make the relation to the bridge explicit. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04selftests: net: lib: add support for IPv6 mcast packet testNikolay Aleksandrov1-3/+11
In order to test an IPv6 multicast packet we need to pass different tc and mausezahn protocols only, so add a simple check for the destination address which decides if we should generate an IPv4 or IPv6 mcast packet. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04selftests: net: bridge: factor out mcast_packet_testNikolay Aleksandrov2-32/+32
Factor out mcast_packet_test into lib.sh so it can be later extended and reused by MLDv2 tests. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-02selftests: add test script for bareudp tunnelsGuillaume Nault3-0/+546
Test different encapsulation modes of the bareudp module: * Unicast MPLS, * IPv4 only, * IPv4 in multiproto mode (that is, IPv4 and IPv6), * IPv6. Each mode is tested with both an IPv4 and an IPv6 underlay. v2: * Add build dependencies in config file (Willem de Bruijn). * The MPLS test now uses its own IP addresses. This minimises the amount of cleanup between tests and simplifies the script. * Verify that iproute2 supports bareudp tunnels before running the script (and other minor usability improvements). Signed-off-by: Guillaume Nault <gnault@redhat.com> Link: https://lore.kernel.org/r/8abc0e58f8a7eeb404f82466505a73110bc43ab8.1604088587.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-02selftests/net: timestamping: add ptp v2 supportGrygorii Strashko1-13/+34
The timestamping tool is supporting now only PTPv1 (IEEE-1588 2002) while modern HW often supports also/only PTPv2. Hence timestamping tool is still useful for sanity testing of PTP drivers HW timestamping capabilities it's reasonable to upstate it to support PTPv2. This patch adds corresponding support which can be enabled by using new parameter "PTPV2". Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20201029190931.30883-1-grygorii.strashko@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-30selftests: net: bridge: add test for igmpv3 *,g auto-addNikolay Aleksandrov1-1/+30
When we have *,G ports in exclude mode and a new S,G,port is added the kernel has to automatically create an S,G entry for each exclude port to get proper forwarding. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-01 06:47:19 +0000