summaryrefslogtreecommitdiffstats
path: root/tools/testing/selftests/livepatch/functions.sh
AgeCommit message (Collapse)AuthorFilesLines
2022-10-05Merge branch 'for-6.1/sysfs-patched-object' into for-linusPetr Mladek1-0/+34
2022-09-23selftests/livepatch: add sysfs testSong Liu1-0/+34
Add a test for livepatch sysfs entries. Signed-off-by: Song Liu <song@kernel.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20220902205208.3117798-3-song@kernel.org
2022-09-23selftests/livepatch: normalize sysctl error messageJoe Lawrence1-1/+1
The livepatch kselftests rely on comparing expected and actual output from such commands as sysctl. A recent commit in procps-ng v4.0.0 [1] changed sysctl's output to emit key pathnames like: sysctl: setting key "/proc/sys/kernel/ftrace_enabled": Device or resource busy versus previous dotted output: sysctl: setting key "kernel.ftrace_enabled": Device or resource busy The modification in output was later reverted [2], but since the change has been tagged in procps-ng v4.0.0, update the livepatch kselftest to handle either case. [1] https://gitlab.com/procps-ng/procps/-/commit/6389deca5bf667f5fab5912acde78ba8e0febbc7 [2] https://gitlab.com/procps-ng/procps/-/commit/b159c198c9160a8eb13254e2b631d0035b9b542c Reported-by: Dennis(Zhuoheng) Li <denli@redhat.com> Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com> Reviewed-by: Kamalesh Babulal <kamalesh.babulal@oracle.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20220811212138.182575-1-joe.lawrence@redhat.com
2022-02-23livepatch: Skip livepatch tests if ftrace cannot be configuredDavid Vernet1-3/+19
livepatch has a set of selftests that are used to validate the behavior of the livepatching subsystem. One of the testcases in the livepatch testsuite is test-ftrace.sh, which among other things, validates that livepatching gracefully fails when ftrace is disabled. In the event that ftrace cannot be disabled using 'sysctl kernel.ftrace_enabled=0', the test will fail later due to it unexpectedly successfully loading the test_klp_livepatch module. While the livepatch selftests are careful to remove any of the livepatch test modules between testcases to avoid this situation, ftrace may still fail to be disabled if another trace is active on the system that was enabled with FTRACE_OPS_FL_PERMANENT. For example, any active BPF programs that use trampolines will cause this test to fail due to the trampoline being implemented with register_ftrace_direct(). The following is an example of such a trace: tcp_drop (1) R I D tramp: ftrace_regs_caller+0x0/0x58 (call_direct_funcs+0x0/0x30) direct-->bpf_trampoline_6442550536_0+0x0/0x1000 In order to make the test more resilient to system state that is out of its control, this patch updates set_ftrace_enabled() to detect sysctl failures, and skip the testrun when appropriate. Suggested-by: Petr Mladek <pmladek@suse.com> Signed-off-by: David Vernet <void@manifault.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Reviewed-by: Petr Mladek <pmladek@suse.com> Tested-by: Petr Mladek <pmladek@suse.com> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20220216161100.3243100-1-void@manifault.com
2020-08-27selftests/livepatch: Do not check order when using "comm" for dmesg checkingMiroslav Benes1-1/+1
check_result() uses "comm" to check expected results of selftests output in dmesg. Everything works fine if timestamps in dmesg are unique. If not, like in this example [ 86.844422] test_klp_callbacks_demo: pre_unpatch_callback: test_klp_callbacks_mod -> [MODULE_STATE_LIVE] Normal state [ 86.844422] livepatch: 'test_klp_callbacks_demo': starting unpatching transition , "comm" fails with "comm: file 2 is not in sorted order". Suppress the order checking with --nocheck-order option. Fixes: 2f3f651f3756 ("selftests/livepatch: Use "comm" instead of "diff" for dmesg") Signed-off-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-07-15selftests/livepatch: adopt to newer sysctl error formatPetr Mladek1-1/+2
With procfs v3.3.16, the sysctl command doesn't print the set key and value on error. This change breaks livepatch selftest test-ftrace.sh, that tests the interaction of sysctl ftrace_enabled: Make it work with all sysctl versions using '-q' option. Explicitly print the final status on success so that it can be verified in the log. The error message is enough on failure. Reported-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Reviewed-by: Joe Lawrence <joe.lawrence@redhat.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Link: https://lore.kernel.org/r/20200714091030.1611-1-pmladek@suse.com
2020-07-14selftests/livepatch: Use "comm" instead of "diff" for dmesgJoe Lawrence1-1/+1
BusyBox diff doesn't support the GNU diff '--LTYPE-line-format' options that were used in the selftests to filter older kernel log messages from dmesg output. Use "comm" which is more available in smaller boot environments. Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com> Reviewed-by: Yannick Cote <ycote@redhat.com> Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20200710183745.19730-1-joe.lawrence@redhat.com
2020-06-19selftests/livepatch: add test delimiter to dmesgJoe Lawrence1-0/+1
Make it bit easier to parse the kernel logs during the selftests by adding a "===== TEST: $test =====" delimiter when each individual test begins. Suggested-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com> Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Reviewed-by: Yannick Cote <ycote@redhat.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20200618181040.21132-4-joe.lawrence@redhat.com
2020-06-19selftests/livepatch: refine dmesg 'taints' in dmesg comparisonJoe Lawrence1-1/+2
The livepatch selftests currently grep on "taints" to filter out "tainting kernel with TAINT_LIVEPATCH" messages which may be logged when loading livepatch modules. Further filter the log to drop "loading out-of-tree module taints kernel" in the rare case the klp_test modules have been built out-of-tree. Look for the longer "taints kernel" or "tainting kernel" strings to avoid inadvertent partial matching. Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com> Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Reviewed-by: Yannick Cote <ycote@redhat.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20200618181040.21132-3-joe.lawrence@redhat.com
2020-06-19selftests/livepatch: Don't clear dmesg when running testsJoe Lawrence1-2/+33
Inspired by commit f131d9edc29d ("selftests/lkdtm: Don't clear dmesg when running tests"), keep a reference dmesg copy when beginning each test. This way check_result() can compare against the initial copy rather than relying upon an empty log. Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com> Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Reviewed-by: Yannick Cote <ycote@redhat.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20200618181040.21132-2-joe.lawrence@redhat.com
2020-01-16selftests/livepatch: Remove unused local variable in set_ftrace_enabled()Miroslav Benes1-1/+0
set_ftrace_enabled() contains unused local variable "sysctl". Remove it. Signed-off-by: Miroslav Benes <mbenes@suse.cz> Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-12-23selftests: livepatch: Fix it to do root uid check and skipShuah Khan1-1/+14
livepatch test configures the system and debug environment to run tests. Some of these actions fail without root access and test dumps several permission denied messages before it exits. Fix test-state.sh to call setup_config instead of set_dynamic_debug as suggested by Petr Mladek <pmladek@suse.com> Fix it to check root uid and exit with skip code instead. Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-11-04selftests/livepatch: Test interaction with ftrace_enabledJoe Lawrence1-1/+13
Since livepatching depends upon ftrace handlers to implement "patched" code functionality, verify that the ftrace_enabled sysctl value interacts with livepatch registration as expected. At the same time, ensure that ftrace_enabled is set and part of the test environment configuration that is saved and restored when running the selftests. Link: http://lkml.kernel.org/r/20191016113316.13415-4-mbenes@suse.cz Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com> Signed-off-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-11-04selftests/livepatch: Make dynamic debug setup and restore genericJoe Lawrence1-9/+13
Livepatch selftests currently save the current dynamic debug config and tweak it for the selftests. The config is restored at the end. Make the infrastructure generic, so that more variables can be saved and restored. Link: http://lkml.kernel.org/r/20191016113316.13415-3-mbenes@suse.cz Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com> Signed-off-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-07-30selftests/livepatch: push and pop dynamic debug configJoe Lawrence1-6/+20
The livepatching self-tests tweak the dynamic debug config to verify the kernel log during the tests. Enhance set_dynamic_debug() so that the config changes are restored when the script exits. Note this functionality needs to keep in sync with: - dynamic_debug input/output formatting - functions affected by set_dynamic_debug() For example, push_dynamic_debug() transforms: kernel/livepatch/transition.c:530 [livepatch]klp_init_transition =_ "'%s': initializing %s transition\012" to the following: file kernel/livepatch/transition.c line 530 =_ Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com> Tested-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-07-24selftests/livepatch: add test skip handlingJoe Lawrence1-0/+20
Add a skip() message function that stops the test, logs an explanation, and sets the "skip" return code (4). Before loading a livepatch self-test kernel module, first verify that we've built and installed it by running a 'modprobe --dry-run'. This should catch a few environment issues, including !CONFIG_LIVEPATCH and !CONFIG_TEST_LIVEPATCH. In these cases, exit gracefully with the new skip() function. Reported-by: Jiri Benc <jbenc@redhat.com> Suggested-by: Shuah Khan <shuah@kernel.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-02-12livepatch/selftests: use "$@" to preserve argument listJoe Lawrence1-12/+7
The livepatch selftest functions.sh library uses "$*" and an intermediate variable to extract and then pass arguments from function to function call. The effect of this combination is that the argument list is flattened into a single argument. Sometimes this is benign, but in cases like __load_mod(), the modprobe invocation will interpret all the module parameters as a single parameter. Drop the intermediate variable and use the "$@" special parameter as described in the bash manual. Link: https://www.gnu.org/software/bash/manual/bash.html#Special-Parameters Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com> Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-01-11selftests/livepatch: introduce testsJoe Lawrence1-0/+203
Add a few livepatch modules and simple target modules that the included regression suite can run tests against: - basic livepatching (multiple patches, atomic replace) - pre/post (un)patch callbacks - shadow variable API Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Tested-by: Miroslav Benes <mbenes@suse.cz> Tested-by: Alice Ferrazzi <alice.ferrazzi@gmail.com> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-10 16:11:13 +0000