summaryrefslogtreecommitdiffstats
path: root/tools/testing/selftests/bpf/test_sysctl.c
AgeCommit message (Collapse)AuthorFilesLines
2020-01-20selftests: Use consistent include paths for libbpfToke Høiland-Jørgensen1-1/+1
Fix all selftests to include libbpf header files with the bpf/ prefix, to be consistent with external users of the library. Also ensure that all includes of exported libbpf header files (those that are exported on 'make install' of the library) use bracketed includes instead of quoted. To not break the build, keep the old include path until everything has been changed to the new one; a subsequent patch will remove that. Fixes: 6910d7d3867a ("selftests/bpf: Ensure bpf_helper_defs.h are taken from selftests dir") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/157952560568.1683545.9649335788846513446.stgit@toke.dk
2019-11-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-1/+7
One conflict in the BPF samples Makefile, some fixes in 'net' whilst we were converting over to Makefile.target rules in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30bpf: Allow narrow loads of bpf_sysctl fields with offset > 0Ilya Leoshkevich1-1/+7
"ctx:file_pos sysctl:read read ok narrow" works on s390 by accident: it reads the wrong byte, which happens to have the expected value of 0. Improve the test by seeking to the 4th byte and expecting 4 instead of 0. This makes the latent problem apparent: the test attempts to read the first byte of bpf_sysctl.file_pos, assuming this is the least-significant byte, which is not the case on big-endian machines: a non-zero offset is needed. The point of the test is to verify narrow loads, so we cannot cheat our way out by simply using BPF_W. The existence of the test means that such loads have to be supported, most likely because llvm can generate them. Fix the test by adding a big-endian variant, which uses an offset to access the least-significant byte of bpf_sysctl.file_pos. This reveals the final problem: verifier rejects accesses to bpf_sysctl fields with offset > 0. Such accesses are already allowed for a wide range of structs: __sk_buff, bpf_sock_addr and sk_msg_md to name a few. Extend this support to bpf_sysctl by using bpf_ctx_range instead of offsetof when matching field offsets. Fixes: 7b146cebe30c ("bpf: Sysctl hook") Fixes: e1550bfe0de4 ("bpf: Add file_pos field to bpf_sysctl ctx") Fixes: 9a1027e52535 ("selftests/bpf: Test file_pos field in bpf_sysctl ctx") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrey Ignatov <rdna@fb.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20191028122902.9763-1-iii@linux.ibm.com
2019-10-30selftests/bpf: Test narrow load from bpf_sysctl.writeIlya Leoshkevich1-0/+23
There are tests for full and narrows loads from bpf_sysctl.file_pos, but for bpf_sysctl.write only full load is tested. Add the missing test. Suggested-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrey Ignatov <rdna@fb.com> Link: https://lore.kernel.org/bpf/20191029143027.28681-1-iii@linux.ibm.com
2019-09-25selftests/bpf: delete unused variables in test_sysctlAndrii Nakryiko1-1/+0
Remove no longer used variables and avoid compiler warnings. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-09-16bpf: fix accessing bpf_sysctl.file_pos on s390Ilya Leoshkevich1-1/+8
"ctx:file_pos sysctl:read write ok" fails on s390 with "Read value != nux". This is because verifier rewrites a complete 32-bit bpf_sysctl.file_pos update to a partial update of the first 32 bits of 64-bit *bpf_sysctl_kern.ppos, which is not correct on big-endian systems. Fix by using an offset on big-endian systems. Ditto for bpf_sysctl.file_pos reads. Currently the test does not detect a problem there, since it expects to see 0, which it gets with high probability in error cases, so change it to seek to offset 3 and expect 3 in bpf_sysctl.file_pos. Fixes: e1550bfe0de4 ("bpf: Add file_pos field to bpf_sysctl ctx") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20190816105300.49035-1-iii@linux.ibm.com/
2019-09-03selftests/bpf: fix endianness issues in test_sysctlIlya Leoshkevich1-43/+82
A lot of test_sysctl sub-tests fail due to handling strings as a bunch of immediate values in a little-endian-specific manner. Fix by wrapping all immediates in bpf_ntohl and the new bpf_be64_to_cpu. fixup_sysctl_value() dynamically writes an immediate, and thus should be endianness-aware. Implement this by simply memcpy()ing the raw user-provided value, since testcase endianness and bpf program endianness match. Fixes: 1f5fa9ab6e2e ("selftests/bpf: Test BPF_CGROUP_SYSCTL") Fixes: 9a1027e52535 ("selftests/bpf: Test file_pos field in bpf_sysctl ctx") Fixes: 6041c67f28d8 ("selftests/bpf: Test bpf_sysctl_get_name helper") Fixes: 11ff34f74e32 ("selftests/bpf: Test sysctl_get_current_value helper") Fixes: 786047dd08de ("selftests/bpf: Test bpf_sysctl_{get,set}_new_value helpers") Fixes: 8549ddc832d6 ("selftests/bpf: Test bpf_strtol and bpf_strtoul helpers") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-09-03selftests/bpf: improve unexpected success reporting in test_syctlIlya Leoshkevich1-1/+2
When tests fail because sysctl() unexpectedly succeeds, they print an inappropriate "Unexpected failure" message and a random errno. Zero out errno before calling sysctl() and replace the message with "Unexpected success". Fixes: 1f5fa9ab6e2e ("selftests/bpf: Test BPF_CGROUP_SYSCTL") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-09-03selftests/bpf: fix "ctx:write sysctl:write read ok" on s390Ilya Leoshkevich1-1/+1
"ctx:write sysctl:write read ok" fails on s390 because it reads the first byte of an int assuming it's the least-significant one, which is not the case on big-endian arches. Since we are not testing narrow accesses here (there is e.g. "ctx:file_pos sysctl:read read ok narrow" for that), simply read the whole int. Fixes: 1f5fa9ab6e2e ("selftests/bpf: Test BPF_CGROUP_SYSCTL") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-12selftests/bpf: C based test for sysctl and strtoXAndrey Ignatov1-1/+56
Add C based test for a few bpf_sysctl_* helpers and bpf_strtoul. Make sure that sysctl can be identified by name and that multiple integers can be parsed from sysctl value with bpf_strtoul. net/ipv4/tcp_mem is chosen as a testing sysctl, it contains 3 unsigned longs, they all are parsed and compared (val[0] < val[1] < val[2]). Example of output: # ./test_sysctl ... Test case: C prog: deny all writes .. [PASS] Test case: C prog: deny access by name .. [PASS] Test case: C prog: read tcp_mem .. [PASS] Summary: 39 PASSED, 0 FAILED Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-12selftests/bpf: Test bpf_strtol and bpf_strtoul helpersAndrey Ignatov1-0/+485
Test that bpf_strtol and bpf_strtoul helpers can be used to convert provided buffer to long or unsigned long correspondingly and return both correct result and number of consumed bytes, or proper errno. Example of output: # ./test_sysctl .. Test case: bpf_strtoul one number string .. [PASS] Test case: bpf_strtoul multi number string .. [PASS] Test case: bpf_strtoul buf_len = 0, reject .. [PASS] Test case: bpf_strtoul supported base, ok .. [PASS] Test case: bpf_strtoul unsupported base, EINVAL .. [PASS] Test case: bpf_strtoul buf with spaces only, EINVAL .. [PASS] Test case: bpf_strtoul negative number, EINVAL .. [PASS] Test case: bpf_strtol negative number, ok .. [PASS] Test case: bpf_strtol hex number, ok .. [PASS] Test case: bpf_strtol max long .. [PASS] Test case: bpf_strtol overflow, ERANGE .. [PASS] Summary: 36 PASSED, 0 FAILED Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-12selftests/bpf: Test file_pos field in bpf_sysctl ctxAndrey Ignatov1-0/+64
Test access to file_pos field of bpf_sysctl context, both read (incl. narrow read) and write. # ./test_sysctl ... Test case: ctx:file_pos sysctl:read read ok .. [PASS] Test case: ctx:file_pos sysctl:read read ok narrow .. [PASS] Test case: ctx:file_pos sysctl:read write ok .. [PASS] ... Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-12selftests/bpf: Test bpf_sysctl_{get,set}_new_value helpersAndrey Ignatov1-0/+222
Test that new value provided by user space on sysctl write can be read by bpf_sysctl_get_new_value and overridden by bpf_sysctl_set_new_value. # ./test_sysctl ... Test case: sysctl_get_new_value sysctl:read EINVAL .. [PASS] Test case: sysctl_get_new_value sysctl:write ok .. [PASS] Test case: sysctl_get_new_value sysctl:write ok long .. [PASS] Test case: sysctl_get_new_value sysctl:write E2BIG .. [PASS] Test case: sysctl_set_new_value sysctl:read EINVAL .. [PASS] Test case: sysctl_set_new_value sysctl:write ok .. [PASS] Summary: 22 PASSED, 0 FAILED Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-12selftests/bpf: Test sysctl_get_current_value helperAndrey Ignatov1-0/+228
Test sysctl_get_current_value on sysctl read and write, buffers with enough space and too small buffers to get E2BIG and truncated result, etc. # ./test_sysctl ... Test case: sysctl_get_current_value sysctl:read ok, gt .. [PASS] Test case: sysctl_get_current_value sysctl:read ok, eq .. [PASS] Test case: sysctl_get_current_value sysctl:read E2BIG truncated .. [PASS] Test case: sysctl_get_current_value sysctl:read EINVAL .. [PASS] Test case: sysctl_get_current_value sysctl:write ok .. [PASS] Summary: 16 PASSED, 0 FAILED Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-12selftests/bpf: Test bpf_sysctl_get_name helperAndrey Ignatov1-0/+222
Test w/ and w/o BPF_F_SYSCTL_BASE_NAME, buffers with enough space and too small buffers to get E2BIG and truncated result, etc. # ./test_sysctl ... Test case: sysctl_get_name sysctl_value:base ok .. [PASS] Test case: sysctl_get_name sysctl_value:base E2BIG truncated .. [PASS] Test case: sysctl_get_name sysctl:full ok .. [PASS] Test case: sysctl_get_name sysctl:full E2BIG truncated .. [PASS] Test case: sysctl_get_name sysctl:full E2BIG truncated small .. [PASS] Summary: 11 PASSED, 0 FAILED Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-12selftests/bpf: Test BPF_CGROUP_SYSCTLAndrey Ignatov1-0/+291
Add unit test for BPF_PROG_TYPE_CGROUP_SYSCTL program type. Test that program can allow/deny access. Test both valid and invalid accesses to ctx->write. Example of output: # ./test_sysctl Test case: sysctl wrong attach_type .. [PASS] Test case: sysctl:read allow all .. [PASS] Test case: sysctl:read deny all .. [PASS] Test case: ctx:write sysctl:read read ok .. [PASS] Test case: ctx:write sysctl:write read ok .. [PASS] Test case: ctx:write sysctl:read write reject .. [PASS] Summary: 6 PASSED, 0 FAILED Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-19 14:56:08 +0000