summaryrefslogtreecommitdiffstats
path: root/tools/power
AgeCommit message (Collapse)AuthorFilesLines
2017-11-18kbuild: /bin/pwd -> pwdBjørn Forsman1-1/+1
Most places use pwd and rely on $PATH lookup. Moving the remaining absolute path /bin/pwd users over for consistency. Also, a reason for doing /bin/pwd -> pwd instead of the other way around is because I believe build systems should make little assumptions on host filesystem layout. Case in point, we do this kind of patching already in NixOS. Ref. commit 028568d84da3cfca49f5f846eeeef01441d70451 ("kbuild: revert $(realpath ...) to $(shell cd ... && /bin/pwd)"). Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-13Merge tag 'acpi-4.15-rc1' of ↵Linus Torvalds3-5/+3
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These update ACPICA to upstream revision 20170831, fix APEI to use the fixmap instead of ioremap_page_range(), add an operation region driver for TI PMIC TPS68470, add support for PCC subspace IDs to the ACPI CPPC driver, fix a few assorted issues and clean up some code. Specifics: - Update the ACPICA code to upstream revision 20170831 including * PDTT table header support (Bob Moore). * Cleanup and extension of internal string-to-integer conversion functions (Bob Moore). * Support for 64-bit hardware accesses (Lv Zheng). * ACPI PM Timer code adjustment to deal with 64-bit return values of acpi_hw_read() (Bob Moore). * Support for deferred table verification in acpiexec (Lv Zheng). - Fix APEI to use the fixmap instead of ioremap_page_range() which cannot work correctly the way the code in there attempted to use it and drop some code that's not necessary any more after that change (James Morse). - Clean up the APEI support code and make it use 64-bit timestamps (Arnd Bergmann, Dongjiu Geng, Jan Beulich). - Add operation region driver for TI PMIC TPS68470 (Rajmohan Mani). - Add support for PCC subspace IDs to the ACPI CPPC driver (George Cherian). - Fix an ACPI EC driver regression related to the handling of EC events during the "noirq" phases of system suspend/resume (Lv Zheng). - Delay the initialization of the lid state in the ACPI button driver to fix issues appearing on some systems (Hans de Goede). - Extend the KIOX000A "device always present" quirk to cover all affected BIOS versions (Hans de Goede). - Clean up some code in the ACPI core and drivers (Colin Ian King, Gustavo Silva)" * tag 'acpi-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (24 commits) ACPI: Mark expected switch fall-throughs ACPI / LPSS: Remove redundant initialization of clk ACPI / CPPC: Make CPPC ACPI driver aware of PCC subspace IDs mailbox: PCC: Move the MAX_PCC_SUBSPACES definition to header file ACPI / sysfs: Make function param_set_trace_method_name() static ACPI / button: Delay acpi_lid_initialize_state() until first user space open ACPI / EC: Fix regression related to triggering source of EC event handling APEI / ERST: use 64-bit timestamps ACPI / APEI: Remove arch_apei_flush_tlb_one() arm64: mm: Remove arch_apei_flush_tlb_one() ACPI / APEI: Remove ghes_ioremap_area ACPI / APEI: Replace ioremap_page_range() with fixmap ACPI / APEI: remove the unused dead-code for SEA/NMI notification type ACPI / x86: Extend KIOX000A quirk to cover all affected BIOS versions ACPI / APEI: adjust a local variable type in ghes_ioremap_pfn_irq() ACPICA: Update version to 20170831 ACPICA: Update acpi_get_timer for 64-bit interface to acpi_hw_read ACPICA: String conversions: Update to add new behaviors ACPICA: String conversions: Cleanup/format comments. No functional changes ACPICA: Restructure/cleanup all string-to-integer conversion functions ...
2017-11-13Merge branches 'pm-devfreq' and 'pm-tools'Rafael J. Wysocki3-4/+7
* pm-devfreq: PM / devfreq: Define the constant governor name PM / devfreq: Remove unneeded conditional statement PM / devfreq: Show the all available frequencies PM / devfreq: Change return type of devfreq_set_freq_table() PM / devfreq: Use the available min/max frequency Revert "PM / devfreq: Add show_one macro to delete the duplicate code" PM / devfreq: Set min/max_freq when adding the devfreq device * pm-tools: tools/power/cpupower: add libcpupower.so.0.0.1 to .gitignore tools/power/cpupower: Add 64 bit library detection MAINTAINERS: add maintainer for tools/power/cpupower cpupower: Fix no-rounding MHz frequency output
2017-11-13Merge branch 'acpica'Rafael J. Wysocki3-5/+3
* acpica: ACPICA: Update version to 20170831 ACPICA: Update acpi_get_timer for 64-bit interface to acpi_hw_read ACPICA: String conversions: Update to add new behaviors ACPICA: String conversions: Cleanup/format comments. No functional changes ACPICA: Restructure/cleanup all string-to-integer conversion functions ACPICA: Header support for the PDTT ACPI table ACPICA: acpiexec: Add testability of deferred table verification ACPICA: Hardware: Enable 64-bit support of hardware accesses
2017-11-09tools/power/cpupower: add libcpupower.so.0.0.1 to .gitignorePrarit Bhargava1-2/+1
Commit ac5a181d065d ("cpupower: Add cpuidle parts into library") added libcpupower.so.0.0.1 which should be hidden from git commands. This patch changes the ignore to all libcpupower.so.* . Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-11-09tools/power/cpupower: Add 64 bit library detectionPrarit Bhargava1-0/+6
The kernel-tools-lib rpm is installing the library to /usr/lib64, and not /usr/lib as the cpupower Makefile is doing in the kernel tree. This resulted in a conflict between the two libraries. After looking at how other tools installed libraries, and looking at the perf code in tools/perf it looks like installing to /usr/lib64 for 64-bit arches is the correct thing to do. Checks with 'ldd cpupower' on SLES, RHEL, Fedora, and Ubuntu result in the correct binary AFAICT: [root@testsystem cpupower]# ldd cpupower | grep cpupower libcpupower.so.0 => /lib64/libcpupower.so.0 (0x00007f1dab447000) Commit ac5a181d065d ("cpupower: Add cpuidle parts into library") added a new cpupower library version. On Fedora, executing the cpupower binary then resulted in this error [root@testsystem cpupower]# ./cpupower monitor ./cpupower: symbol lookup error: ./cpupower: undefined symbol: get_cpu_topology 64-bit libraries should be installed to /usr/lib64, and other libraries should be installed to /usr/lib. This code was taken from the perf Makefile.config which supports /usr/lib and /usr/lib64. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-11-03cpupower: Fix no-rounding MHz frequency outputPrarit Bhargava1-2/+0
'cpupower frequency-info -ln' returns kHz values on systems with MHz range minimum CPU frequency range. For example, on a 800MHz to 4.20GHz system the command returns hardware limits: 800000 MHz - 4.200000 GHz The code that causes this error can be removed. The next else if clause will handle the output correctly such that hardware limits: 800.000 MHz - 4.200000 GHz is displayed correctly. [v2]: Remove two lines instead of fixing broken code. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: Thomas Renninger <trenn@suse.com> Cc: Stafford Horne <shorne@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Reviewed-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-11-02Merge tag 'spdx_identifiers-4.14-rc8' of ↵Linus Torvalds21-0/+21
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull initial SPDX identifiers from Greg KH: "License cleanup: add SPDX license identifiers to some files Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: License cleanup: add SPDX license identifier to uapi header files with a license License cleanup: add SPDX license identifier to uapi header files with no license License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman21-0/+21
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-28Merge tag 'kbuild-fixes-v4.14-2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - fix O= building on dash - remove unused dependency in Makefile - fix default of a choice in Kconfig - fix typos and documentation style - fix command options unrecognized by sparse * tag 'kbuild-fixes-v4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: clang: fix build failures with sparse check kbuild doc: a bundle of fixes on makefiles.txt Makefile: kselftest: fix grammar typo kbuild: Fix optimization level choice default kbuild: drop unused symverfile in Makefile.modpost kbuild: revert $(realpath ...) to $(shell cd ... && /bin/pwd)
2017-10-18Revert "tools/power turbostat: stop migrating, unless '-m'"Len Brown1-9/+1
This reverts commit c91fc8519d87715a3a173475ea3778794c139996. That change caused a C6 and PC6 residency regression on large idle systems. Users also complained about new output indicating jitter: turbostat: cpu6 jitter 3794 9142 Signed-off-by: Len Brown <len.brown@intel.com> Cc: 4.13+ <stable@vger.kernel.org> # v4.13+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-10-07kbuild: revert $(realpath ...) to $(shell cd ... && /bin/pwd)Masahiro Yamada1-1/+1
I thought commit 8e9b46679923 ("kbuild: use $(abspath ...) instead of $(shell cd ... && /bin/pwd)") was a safe conversion, but it changed the behavior. $(abspath ...) / $(realpath ...) does not expand shell special characters, such as '~'. Here is a simple Makefile example: ---------------->8---------------- $(info /bin/pwd: $(shell cd ~/; /bin/pwd)) $(info abspath: $(abspath ~/)) $(info realpath: $(realpath ~/)) all: @: ---------------->8---------------- $ make /bin/pwd: /home/masahiro abspath: /home/masahiro/workspace/~ realpath: This can be a real problem if 'make O=~/foo' is invoked from another Makefile or primitive shell like dash. This commit partially reverts 8e9b46679923. Fixes: 8e9b46679923 ("kbuild: use $(abspath ...) instead of $(shell cd ... && /bin/pwd)") Reported-by: Julien Grall <julien.grall@arm.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Julien Grall <julien.grall@arm.com>
2017-10-04ACPICA: Restructure/cleanup all string-to-integer conversion functionsBob Moore3-5/+3
ACPICA commit 610046d444ad781cc36673bf1f030abe50cbc61f Improve adherence to ACPI spec for implicit and explicit conversions Adds octal support for constants in ASL code Adds integer overflow errors for constants during ASL compilation Eliminates most of the existing complex flags parameters Simplify support for implicit/explicit runtime conversions Adds one new file, utilities/utstrsuppt.c Link: https://github.com/acpica/acpica/commit/610046d444ad Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-09-14Merge tag 'kbuild-v4.14' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Use Make-builtin $(abspath ...) helper to get absolute path - Add W=2 extra warning option to detect unused macros - Use more KCONFIG_CONFIG instead hard-coded .config - Fix bugs of tar*-pkg targets * tag 'kbuild-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: buildtar: do not print successful message if tar returns error kbuild: buildtar: fix tar error when CONFIG_MODULES is disabled kbuild: Use KCONFIG_CONFIG in buildtar Kbuild: enable -Wunused-macros warning for "make W=2" kbuild: use $(abspath ...) instead of $(shell cd ... && /bin/pwd)
2017-09-05Merge tag 'acpi-4.14-rc1' of ↵Linus Torvalds3-34/+75
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These include a usual ACPICA code update (this time to upstream revision 20170728), a fix for a boot crash on some systems with Thunderbolt devices connected at boot time, a rework of the handling of PCI bridges when setting up device wakeup, new support for Apple device properties, support for DMA configurations reported via ACPI on ARM64, APEI-related updates, ACPI EC driver updates and assorted minor modifications in several places. Specifics: - Update the ACPICA code in the kernel to upstream revision 20170728 including: * Alias operator handling update (Bob Moore). * Deferred resolution of reference package elements (Bob Moore). * Support for the _DMA method in walk resources (Bob Moore). * Tables handling update and support for deferred table verification (Lv Zheng). * Update of SMMU models for IORT (Robin Murphy). * Compiler and disassembler updates (Alex James, Erik Schmauss, Ganapatrao Kulkarni, James Morse). * Tools updates (Erik Schmauss, Lv Zheng). * Assorted minor fixes and cleanups (Bob Moore, Kees Cook, Lv Zheng, Shao Ming). - Rework the initialization of non-wakeup GPEs with method handlers in order to address a boot crash on some systems with Thunderbolt devices connected at boot time where we miss an early hotplug event due to a delay in GPE enabling (Rafael Wysocki). - Rework the handling of PCI bridges when setting up ACPI-based device wakeup in order to avoid disabling wakeup for bridges prematurely (Rafael Wysocki). - Consolidate Apple DMI checks throughout the tree, add support for Apple device properties to the device properties framework and use these properties for the handling of I2C and SPI devices on Apple systems (Lukas Wunner). - Add support for _DMA to the ACPI-based device properties lookup code and make it possible to use the information from there to configure DMA regions on ARM64 systems (Lorenzo Pieralisi). - Fix several issues in the APEI code, add support for exporting the BERT error region over sysfs and update APEI MAINTAINERS entry with reviewers information (Borislav Petkov, Dongjiu Geng, Loc Ho, Punit Agrawal, Tony Luck, Yazen Ghannam). - Fix a potential initialization ordering issue in the ACPI EC driver and clean it up somewhat (Lv Zheng). - Update the ACPI SPCR driver to extend the existing XGENE 8250 workaround in it to a new platform (m400) and to work around an Xgene UART clock issue (Graeme Gregory). - Add a new utility function to the ACPI core to support using ACPI OEM ID / OEM Table ID / Revision for system identification in blacklisting or similar and switch over the existing code already using this information to this new interface (Toshi Kani). - Fix an xpower PMIC issue related to GPADC reads that always return 0 without extra pin manipulations (Hans de Goede). - Add statements to print debug messages in a couple of places in the ACPI core for easier diagnostics (Rafael Wysocki). - Clean up the ACPI processor driver slightly (Colin Ian King, Hanjun Guo). - Clean up the ACPI x86 boot code somewhat (Andy Shevchenko). - Add a quirk for Dell OptiPlex 9020M to the ACPI backlight driver (Alex Hung). - Assorted fixes, cleanups and updates related to ACPI (Amitoj Kaur Chawla, Bhumika Goyal, Frank Rowand, Jean Delvare, Punit Agrawal, Ronald Tschalär, Sumeet Pawnikar)" * tag 'acpi-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (75 commits) ACPI / APEI: Suppress message if HEST not present intel_pstate: convert to use acpi_match_platform_list() ACPI / blacklist: add acpi_match_platform_list() ACPI, APEI, EINJ: Subtract any matching Register Region from Trigger resources ACPI: make device_attribute const ACPI / sysfs: Extend ACPI sysfs to provide access to boot error region ACPI: APEI: fix the wrong iteration of generic error status block ACPI / processor: make function acpi_processor_check_duplicates() static ACPI / EC: Clean up EC GPE mask flag ACPI: EC: Fix possible issues related to EC initialization order ACPI / PM: Add debug statements to acpi_pm_notify_handler() ACPI: Add debug statements to acpi_global_event_handler() ACPI / scan: Enable GPEs before scanning the namespace ACPICA: Make it possible to enable runtime GPEs earlier ACPICA: Dispatch active GPEs at init time ACPI: SPCR: work around clock issue on xgene UART ACPI: SPCR: extend XGENE 8250 workaround to m400 ACPI / LPSS: Don't abort ACPI scan on missing mem resource mailbox: pcc: Drop uninformative output during boot ACPI/IORT: Add IORT named component memory address limits ...
2017-09-01kbuild: use $(abspath ...) instead of $(shell cd ... && /bin/pwd)Masahiro Yamada1-1/+1
Kbuild conventionally uses $(shell cd ... && /bin/pwd) idiom to get the absolute path of the directory because GNU Make 3.80, the minimal supported version at that time, did not support $(abspath ...) or $(realpath ...). Commit 37d69ee30808 ("docs: bump minimal GNU Make version to 3.81") dropped the GNU Make 3.80 support, so we are now allowed to use those make-builtin helpers. This conversion will provide better portability without relying on the pwd command or its location /bin/pwd. I am intentionally using $(realpath ...) instead $(abspath ...) in some places. The difference between the two is $(realpath ...) returns an empty string if the given path does not exist. It is convenient in places where we need to error-out if the makefile fails to create an output directory. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Thierry Reding <treding@nvidia.com>
2017-08-03ACPICA: acpidump: Add DSDT/FACS instance support for Linux and EFILv Zheng1-32/+73
ACPICA commit 343fc31840d40c06001f3b170ee5bcdfd3c7f3e0 ACPI spec allows to configure different 32-bit/64-bit table addresses for DSDT and FACS. And for FACS, it's meaningful to dump both of them as they are used to support different suspend protocols. While: 1. on Linux, only 1 instance is supported for DSDT/FACS; and 2. on EFI, the code in osl_get_table() is buggy with special table instances, causing endless file dump for such tables (reported by Shao Ming in link #2). This patch adds DSDT/FACS instance support for Linux/EFI acpidump. Fixed by Lv Zheng. Link: https://github.com/acpica/acpica/commit/343fc318 Link: https://bugs.acpica.org/show_bug.cgi?id=1407 [#1] Link: https://github.com/acpica/acpica/issues/285 [#2] Reported-by: Shao Ming <smbest163@163.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-03ACPICA: CLib: Add short multiply/shift supportLv Zheng2-2/+2
ACPICA commit 01b8f5a2350b9cc329cd8402ac8faec36fc501f5 In order to build ACPICA EFI tools with EDK-II on Windows, 64-bit multiply/shift supports are also required to be implemented. Otherwise, MSVC complains: acpidump.lib(utstrtoul64.obj) : error LNK2001: unresolved external symbol __allmul acpidump.lib(uthex.obj) : error LNK2001: unresolved external symbol __aullshr Note: 1. This patch also splits _EDK2_EFI from _GNU_EFI as they might have different math64 supports. 2. Support of gcc math64 is not included in this patch. 3. Support of EDK2 arch independent math64 is done via linking to base_lib. This patch fixes this issue. Reported by Shao Ming, fixed by Lv Zheng. For Linux kernel, this patch is a functional no-op. Link: https://github.com/acpica/acpica/commit/01b8f5a2 Tested-by: "Shao, Ming" <smbest163@163.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-31tools/power/cpupower: allow running without cpu0Prarit Bhargava8-17/+28
Linux-3.7 added CONFIG_BOOTPARAM_HOTPLUG_CPU0, allowing systems to offline cpu0. But when cpu0 is offline, cpupower monitor will not display all processor and Mperf information: [root@intel-skylake-dh-03 cpupower]# ./cpupower monitor WARNING: at least one cpu is offline |Idle_Stats CPU | POLL | C1-S | C1E- | C3-S | C6-S | C7s- | C8-S 4| 0.00| 0.00| 0.00| 0.00| 0.90| 0.00| 96.13 1| 0.00| 0.00| 5.49| 0.00| 0.01| 0.00| 92.26 5| 0.00| 0.00| 0.00| 0.00| 0.46| 0.00| 99.50 2| 45.42| 0.00| 0.00| 0.00| 22.94| 0.00| 28.84 6| 0.00| 37.54| 0.00| 0.00| 0.00| 0.00| 0.00 3| 0.00| 0.00| 0.00| 0.00| 0.30| 0.00| 91.99 7| 0.00| 0.00| 0.00| 0.00| 4.70| 0.00| 0.70 This patch replaces the hard-coded use of cpu0 in cpupower with the current cpu, allowing it to run without a cpu0. After the patch is applied, [root@intel-skylake-dh-03 cpupower]# ./cpupower monitor WARNING: at least one cpu is offline |Nehalem || Mperf || Idle_Stats CPU | C3 | C6 | PC3 | PC6 || C0 | Cx | Freq || POLL | C1-S | C1E- | C3-S | C6-S | C7s- | C8-S 4| 0.01| 1.27| 0.00| 0.00|| 0.04| 99.96| 3957|| 0.00| 0.00| 0.00| 0.00| 1.43| 0.00| 98.52 1| 0.00| 98.82| 0.00| 0.00|| 0.05| 99.95| 3361|| 0.00| 0.00| 0.01| 0.00| 0.03| 0.00| 99.88 5| 0.00| 98.82| 0.00| 0.00|| 0.09| 99.91| 3917|| 0.00| 0.00| 0.00| 0.00| 99.38| 0.00| 0.50 2| 0.33| 0.00| 0.00| 0.00|| 0.00|100.00| 3890|| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00|100.00 6| 0.33| 0.00| 0.00| 0.00|| 0.01| 99.99| 3903|| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 99.99 3| 0.01| 0.71| 0.00| 0.00|| 0.06| 99.94| 3678|| 0.00| 0.00| 0.00| 0.00| 0.80| 0.00| 99.13 7| 0.01| 0.71| 0.00| 0.00|| 0.03| 99.97| 3538|| 0.00| 0.69| 11.70| 0.00| 0.00| 0.00| 87.57 There are some minor cleanups included in this patch. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Thomas Renninger <trenn@suse.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-22pm-graph: package makefile and man pagesTodd E Brandt3-42/+86
update help text and man pages for both tools - added more examples and separated them by category Makefile upgrades - uninstall: remove errors from uninstall if tool not found - install: perform uninstall before install Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-22pm-graph: AnalyzeBoot v2.1Todd E Brandt1-199/+387
- changed output from single html file to dir with html/dmesg/ftrace - add sysinfo to logs and timeline - add -sysinfo command, displays dmidecode values and cpu/mem info - set trace buffer size to lesser of memtotal/2 or 2GB when using callgraph - extended timeline to the last init call in user space separated timeline into two phases, kernel mode & user mode - add kernel version check for ftrace usage, 4.10 minimum - change -filter argument to -func - add strict protections on -func usage with full symbol checks now only works for statically linked functions cmd -flistall now ignores all loadable module functions - add -cgfilter argument for reducing timeline size by removing callgraphs - crontab usage: preserve existing @reboot lines in user crontab - fedora support added: uses grub2 loader, handles fedora crontab - stop using "which" to find binaries, search pre-defined path list - moved most output processing to analyze_suspend library Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-22pm-graph: AnalyzeSuspend v4.7Todd E Brandt1-155/+379
- changed -rtcwake parameter to be on & 15 sec by default, to disable rtcwake use: "-rtcwake off" - changed behavior of -o: renames HTML file on rerun, subdir on new run - changed execution_misalignment error to missing_function_name - add sysinfo to logs and timeline via a custom dmidecode call it supplants dmidecode tool when used as a library call - add -sysinfo command, displays dmidecode values and cpu/mem info - set trace buffer size to lesser of memtotal/2 or 2GB when using callgraph - add support for /sys/power/mem_sleep. if mem_sleep found: mem-shallow=standby, mem-s2idle=freeze, mem-deep=mem - remove redundant javascript - cosmetic changes to HTML layout Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-04Merge tag 'acpi-4.13-rc1' of ↵Linus Torvalds1-3/+7
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These mostly update the ACPICA code in the kernel to upstream revision 20170531 which covers all of the new material from ACPI 6.2, including new tables (WSMT, HMAT, PPTT), new subtables and definition changes for some existing tables (BGRT, HEST, SRAT, TPM2, PCCT), new resource descriptor macros for pin control, support for new predefined methods (_LSI, _LSR, _LSW, _HMA), fixes and cleanups. On top of that, an additional ACPICA change from Kees (which also is upstream already) switches all of the definitions of function pointer structures in ACPICA to use designated initializers so as to make the structure layout randomization GCC plugin work with it. The rest is a few fixes and cleanups in the EC driver, an xpower PMIC driver update, a new backlight blacklist entry, and update of the tables configfs interface and a messages formatting cleanup. Specifics: - Update the ACPICA code in the kernel to upstream revision revision 20170531 (which covers all of the new material from ACPI 6.2) including: * Support for the PinFunction(), PinConfig(), PinGroup(), PinGroupFunction(), and PinGroupConfig() resource descriptors (Mika Westerberg). * Support for new subtables in HEST and SRAT, new notify value for HEST, header support for TPM2 table changes, and BGRT Status field update (Bob Moore). * Support for new PCCT subtables (David Box). * Support for _LSI, _LSR, _LSW, and _HMA as predefined methods (Erik Schmauss). * Support for the new WSMT, HMAT, and PPTT tables (Lv Zheng). * New UUID values for Processor Properties (Bob Moore). * New notify values for memory attributes and graceful shutdown (Bob Moore). * Fix related to the PCAT_COMPAT MADT flag (Janosch Hildebrand). * Resource to AML conversion fix for resources containing GPIOs (Mika Westerberg). * Disassembler-related updates (Bob Moore, David Box, Erik Schmauss). * Assorted fixes and cleanups (Bob Moore, Erik Schmauss, Lv Zheng, Cao Jin). - Modify ACPICA to always use designated initializers for function pointer structures to make the structure layout randomization GCC plugin work with it (Kees Cook). - Update the tables configfs interface to unload SSDTs on configfs entry removal (Jan Kiszka). - Add support for the GPI1 regulator to the xpower PMIC Operation Region handler (Hans de Goede). - Fix ACPI EC issues related to conflicting EC definitions in the ECDT and in the ACPI namespace (Lv Zheng, Carlo Caione, Chris Chiu). - Fix an interrupt storm issue in the EC driver and make its debug output work with dynamic debug as expected (Lv Zheng). - Add ACPI backlight quirk for Dell Precision 7510 (Shih-Yuan Lee). - Fix whitespace in pr_fmt() to align log entries properly in some places in the ACPI subsystem (Vincent Legoll)" * tag 'acpi-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (63 commits) ACPI / EC: Add quirk for GL720VMK ACPI / EC: Fix media keys not working problem on some Asus laptops ACPI / EC: Add support to skip boot stage DSDT probe ACPI / EC: Enhance boot EC sanity check ACPI / video: Add quirks for the Dell Precision 7510 ACPI: EC: Fix EC command visibility for dynamic debug ACPI: EC: Fix an EC event IRQ storming issue ACPICA: Use designated initializers ACPICA: Update version to 20170531 ACPICA: Update a couple of debug output messages ACPICA: acpiexec: enhance local signal handler ACPICA: Simplify output for the ACPI Debug Object ACPICA: Unix application OSL: Correctly handle control-c (EINTR) ACPICA: Improvements for debug output only ACPICA: Disassembler: allow conflicting external declarations to be emitted. ACPICA: Disassembler: add external op to namespace on first pass ACPICA: Disassembler: prevent external op's from opening a new scope ACPICA: Changed Gbl_disasm_flag to acpi_gbl_disasm_flag ACPICA: Changing External to a named object ACPICA: Update two error messages to emit control method name ...
2017-06-27ACPICA: Unix application OSL: Correctly handle control-c (EINTR)Bob Moore1-3/+7
ACPICA commit dfbb87c3a96cfd007375f34a96e6f4a8ee477f97 Handle EINTR from a sem_wait operation. Ignore a control-c. Link: https://github.com/acpica/acpica/commit/dfbb87c3 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-27cpupower: Add support for new AMD family 0x17Sherry Hurwitz3-11/+44
Add support for new AMD family 0x17 - Add bit field changes to the msr_pstate structure - Add the new formula for the calculation of cof - Changed method to access to CpbDis Signed-off-by: Sherry Hurwitz <sherry.hurwitz@amd.com> Acked-by: Thomas Renninger <trenn@suse.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-27cpupower: Fix bug where return value was not usedSherry Hurwitz1-3/+2
Save return value from amd_pci_get_num_boost_states and remove redundant setting of *support Signed-off-by: Sherry Hurwitz <sherry.hurwitz@amd.com> Reviewed-by: Thomas Renninger <trenn@suse.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-27Merge back PM tools material for v4.13.Rafael J. Wysocki3-272/+1500
2017-06-24tools/power turbostat: update version numberLen Brown1-1/+1
Signed-off-by: Len Brown <len.brown@intel.com>
2017-06-24tools/power turbostat: decode MSR_IA32_MISC_ENABLE only on IntelLen Brown1-0/+3
otherwise, turbostat bails on on AMD Opteron boxes: turbostat: cpu26: msr offset 0x1a0 read failed: Input/output error Reported-by: Kamil Kolakowski <kkolakow@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
2017-06-24tools/power turbostat: stop migrating, unless '-m'Len Brown1-1/+9
Turbostat has the capability to set its own affinity to each CPU so that its MSR accesses are on the local CPU. However, using the in-kernel cross-call in the msr driver tends to be less invasive, so do that -- by-default. '-m' remains to get the old behaviour. Signed-off-by: Len Brown <len.brown@intel.com>
2017-06-23tools/power turbostat: if --debug, print sampling overheadLen Brown1-2/+19
The --debug option now pre-pends each row with the number of micro-seconds [usec] to collect the finishing snapshot for that row. Signed-off-by: Len Brown <len.brown@intel.com>
2017-06-23tools/power turbostat: hide SKL counters, when not requestedLen Brown1-13/+45
Skylake has some new counters, and they were erroneously exempt from --show and --hide eg. turbostat --quiet --show CPU CPU Totl%C0 Any%C0 GFX%C0 CPUGFX% - 116.73 90.56 85.69 79.00 0 117.78 91.38 86.47 79.71 2 1 3 is now CPU - 0 2 1 3 Signed-off-by: Len Brown <len.brown@intel.com>
2017-05-22Merge branches 'acpi-button' and 'acpi-tools'Rafael J. Wysocki1-0/+4
* acpi-button: Revert "ACPI / button: Remove lid_init_state=method mode" * acpi-tools: tools/power/acpi: Add .gitignore file
2017-05-16Merge branch 'utilities' of ↵Rafael J. Wysocki3-272/+1500
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull power management utilities updates from Len Brown. * 'utilities' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: intel_pstate: use updated msr-index.h HWP.EPP values tools/power x86_energy_perf_policy: support HWP.EPP x86: msr-index.h: fix shifts to ULL results in HWP macros. x86: msr-index.h: define HWP.EPP values x86: msr-index.h: define EPB mid-points
2017-05-12tools/power/acpi: Add .gitignore filePrarit Bhargava1-0/+4
Add a .gitignore file so that git commands do not pick up the resulting binaries and directories. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Acked-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-05-11tools/power x86_energy_perf_policy: support HWP.EPPLen Brown3-272/+1500
x86_energy_perf_policy(8) was created as an example of how the user, or upper-level OS, can manage MSR_IA32_ENERGY_PERF_BIAS (EPB). Hardware consults EPB when it makes internal decisions balancing energy-saving vs performance. For example, should HW quickly or slowly transition into and out of power-saving idles states? Should HW quickly or slowly ramp frequency up or down in response to demand in the turbo-frequency range? Depending on the processor, EPB may have package, core, or CPU thread scope. As such, the only general policy is to write the same value to EPB on every CPU in the system. Recent platforms add support for Hardware Performance States (HWP). HWP effectively extends hardware frequency control from the opportunistic turbo-frequency range to control the entire range of available processor frequencies. Just as turbo-mode used EPB, HWP can use EPB to help decicde how quickly to ramp frequency and voltage up and down in response to changing demand. Indeed, BDX and BDX-DE, the first processors to support HWP, use EPB for this purpose. Starting in SKL, HWP no longer looks to EPB for influence. Instead, it looks in a new MSR specifically for this purpose: IA32_HWP_REQUEST.Energy_Performance_Preference (HWP.EPP). HWP.EPP is like EPB, except that it is specific to HWP-mode frequency selection. Also, HWP.EPP is defined to have per CPU-thread scope. Starting in SKX, IA32_HWP_REQUEST is augmented by IA32_HWP_REQUEST_PKG -- which has the same function, but is defined to have package-wide scope. A new bit in IA32_HWP_REQUEST determines if it over-rides the IA32_HWP_REQUEST_PKG or not. Note that HWP-mode can be enabled in several ways. The "in-band" method is for HWP to be exposed in CPUID, and for the Linux intel_pstate driver to recognized that, and thus enable HWP. In this case, starting in Linux 4.10, intel_pstate exports cpufreq sysfs attribute "energy_performance_preference" which can be used to manage HWP.EPP. This interface can be used to set HWP.EPP to these values: 0 performance 128 balance_performance (default) 192 balance_power 255 power Here, x86_energy_performance_policy is updated to use idential strings and values as intel_pstate. But HWP-mode may also be enabled by firmware before the OS boots, and the OS may not be aware of HWP. In this case, intel_pstate is not available to provide sysfs attributes, and x86_energy_perf_policy or a similar utility is invaluable for managing HWP.EPP, for this utility works the same, no matter if cpufreq is enabled or not. Signed-off-by: Len Brown <len.brown@intel.com>
2017-04-19tools: power: pm-graph: Package makefile and man pagesTodd E Brandt3-0/+403
BootGraph and SleepGraph man pages - includes full descriptions of tool arguments and commands - includes examples of common use cases Makefile - no build required, used only for install - installs man pages and tools as libraries with links - includes an uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-04-19tools: power: pm-graph: AnalyzeBoot v2.0Todd E Brandt1-0/+824
First release into the kernel tools source - pulls in analyze_suspend.py as as library, same html formatting - supplants scripts/bootgraph.pl, outputs HTML instead of SVG - enables automatic reboot and collection for easy timeline capture - enables ftrace callgraph collection from early boot Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-04-19tools: power: pm-graph: AnalyzeSuspend v4.6Todd E Brandt1-0/+5309
Moved from scripts into tools, and updated from 4.5 to 4.6 - Changed the tool title to SleepGraph - Reformatted the code so analyze_suspend can be used as a library - Reorganized all html/js/css handling code to be used by other tools - upgraded the -summary feature to work faster with better readability Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-04-19tools/power/x86/intel_pstate_tracer: Adjust directory ownershipDoug Smythies1-0/+17
The intel_pstate_tracer.py script only needs to be run as root when it is also used to actually acquire the trace data that it will post process. Otherwise it is generally preferable that it be run as a regular user. If run the first time as root the results directory will be incorrect for any subsequent run as a regular user. For any run as root the specific testname subdirectory will not allow any subsequent file saves by a regular user. Typically, and for example, the regular user might be attempting to save a .csv file converted to a spreadsheet with added calculations or graphs. Set the directories and files owner and groups IDs to be the regular user, if required. Signed-off-by: Doug Smythies <dsmythies@telus.net> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-04-13cpupower: Fix turbo frequency reporting for pre-Sandy Bridge coresBen Hutchings1-0/+1
The switch that conditionally sets CPUPOWER_CAP_HAS_TURBO_RATIO and CPUPOWER_CAP_IS_SNB flags is missing a break, so all cores get both flags set and an assumed base clock of 100 MHz for turbo values. Reported-by: GSR <gsr.bugs@infernal-iceberg.com> Tested-by: GSR <gsr.bugs@infernal-iceberg.com> References: https://bugs.debian.org/859978 Fixes: 8fb2e440b223 (cpupower: Show Intel turbo ratio support via ...) Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-04-13Merge branch 'turbostat' of ↵Rafael J. Wysocki2-13/+15
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull turbostat utility fixes for v4.11 from Len Brown. * 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: update version number tools/power turbostat: fix impossibly large CPU%c1 value tools/power turbostat: turbostat.8 add missing column definitions tools/power turbostat: update HWP dump to decimal from hex tools/power turbostat: enable package THERM_INTERRUPT dump tools/power turbostat: show missing Core and GFX power on SKL and KBL tools/power turbostat: bugfix: GFXMHz column not changing
2017-04-12tools/power turbostat: update version numberLen Brown1-1/+1
Signed-off-by: Len Brown <len.brown@intel.com>
2017-04-12tools/power turbostat: fix impossibly large CPU%c1 valueLen Brown1-1/+1
Most CPUs do not have a hardware c1 counter, and so turbostat derives c1 residency: c1 = TSC - MPERF - other_core_cstate_counters As it is not possible to atomically read these coutners, measurement jitter can case this calcuation to "go negative" when very close to 0. Turbostat detect that case and simply prints c1 = 0.00% But that check neglected to account for systems where the TSC crystal clock domain and the MPERF BCLK domain are differ by a small amount. That allowed very small negative c1 numbers to escape this check and be printed as huge positve numbers. This code begs for a bit of cleanup, but this patch is the minimal change to fix the issue. Signed-off-by: Len Brown <len.brown@intel.com>
2017-04-12tools/power turbostat: turbostat.8 add missing column definitionsDoug Smythies1-0/+2
Add GFX%rc6 and GFXMHz to the column descriptions section of the turbostat man page. Signed-off-by: Doug Smythies <dsmythies@telus.net> Signed-off-by: Len Brown <len.brown@intel.com>
2017-04-12tools/power turbostat: update HWP dump to decimal from hexLen Brown1-3/+3
Syntax only. The HWP CAPABILTIES and REQUEST ratios are more easily viewed in decimal -- just multiply by 100 and you get MHz... new: cpu0: MSR_HWP_CAPABILITIES: 0x010c1b23 (high 35 guar 27 eff 12 low 1) cpu0: MSR_HWP_REQUEST: 0x80002301 (min 1 max 35 des 0 epp 0x80 window 0x0 pkg 0x0) old: cpu0: MSR_HWP_CAPABILITIES: 0x010c1b23 (high 0x23 guar 0x1b eff 0xc low 0x1) cpu0: MSR_HWP_REQUEST: 0x80002301 (min 0x1 max 0x23 des 0x0 epp 0x80 window 0x0 pkg 0x0) Signed-off-by: Len Brown <len.brown@intel.com>
2017-04-12tools/power turbostat: enable package THERM_INTERRUPT dumpLen Brown1-6/+2
cpu0: MSR_IA32_TEMPERATURE_TARGET: 0x00641400 (100 C) cpu0: MSR_IA32_PACKAGE_THERM_STATUS: 0x884b0800 (25 C) cpu0: MSR_IA32_PACKAGE_THERM_INTERRUPT: 0x00000003 (100 C, 100 C) Enable the same per-core output, but hide it behind --debug because it is too verbose on big systems. Signed-off-by: Len Brown <len.brown@intel.com>
2017-04-12tools/power turbostat: show missing Core and GFX power on SKL and KBLLen Brown1-1/+3
While the current SDM is silent on the matter, the Core and GFX RAPL power meters on SKL and KBL appear to work -- so show them. Reported-by: Yaroslav Isakov <yaroslav.isakov@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2017-03-04tools/power turbostat: bugfix: GFXMHz column not changingLen Brown1-1/+3
turbostat displays a GFXMHz column, which comes from reading /sys/class/graphics/fb0/device/drm/card0/gt_cur_freq_mhz But GFXMHz was not changing, even when a manual cat /sys/class/graphics/fb0/device/drm/card0/gt_cur_freq_mhz showed a new value. It turns out that a rewind() on the open file is not sufficient, fflush() (or a close/open) is needed to read fresh values. Reported-by: Yaroslav Isakov <yaroslav.isakov@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2017-03-02Merge tag 'pm-turbostat-4.11-rc1' of ↵Linus Torvalds2-582/+1551
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull turbostat utility updates from Rafael Wysocki: "Power management turbostat utility updates. These update turbostat significantly and in particular: - default output is now verbose, --debug is no longer required to get all counters. As a result, some options have been added to specify exactly what output is wanted. - added --quiet to skip system configuration output - added --list, --show and --hide parameters - added --cpu parameter - enhanced Baytrail SoC support - added Gemini Lake SoC support - added sysfs C-state columns Also the symbol definitions in arch/x86/include/asm/intel-family.h and arch/x86/include/asm/msr-index.h are updated and the intel_idle and intel_pstate drivers are modified to use the updated symbols. Credits to Len Brown for all of these changes" * tag 'pm-turbostat-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (44 commits) tools/power turbostat: version 17.02.24 tools/power turbostat: bugfix: --add u32 was printed as u64 tools/power turbostat: show error on exec tools/power turbostat: dump p-state software config tools/power turbostat: show package number, even without --debug tools/power turbostat: support "--hide C1" etc. tools/power turbostat: move --Package and --processor into the --cpu option tools/power turbostat: turbostat.8 update tools/power turbostat: update --list feature tools/power turbostat: use wide columns to display large numbers tools/power turbostat: Add --list option to show available header names tools/power turbostat: fix zero IRQ count shown in one-shot command mode tools/power turbostat: add --cpu parameter tools/power turbostat: print sysfs C-state stats tools/power turbostat: extend --add option to accept /sys path tools/power turbostat: skip unused counters on BDX tools/power turbostat: fix decoding for GLM, DNV, SKX turbo-ratio limits tools/power turbostat: skip unused counters on SKX tools/power turbostat: Denverton: use HW CC1 counter, skip C3, C7 tools/power turbostat: initial Gemini Lake SOC support ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-21 23:27:53 +0000