summaryrefslogtreecommitdiffstats
path: root/tools/perf
AgeCommit message (Collapse)AuthorFilesLines
2018-04-02Merge tag 'arch-removal' of ↵Linus Torvalds1-4/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pul removal of obsolete architecture ports from Arnd Bergmann: "This removes the entire architecture code for blackfin, cris, frv, m32r, metag, mn10300, score, and tile, including the associated device drivers. I have been working with the (former) maintainers for each one to ensure that my interpretation was right and the code is definitely unused in mainline kernels. Many had fond memories of working on the respective ports to start with and getting them included in upstream, but also saw no point in keeping the port alive without any users. In the end, it seems that while the eight architectures are extremely different, they all suffered the same fate: There was one company in charge of an SoC line, a CPU microarchitecture and a software ecosystem, which was more costly than licensing newer off-the-shelf CPU cores from a third party (typically ARM, MIPS, or RISC-V). It seems that all the SoC product lines are still around, but have not used the custom CPU architectures for several years at this point. In contrast, CPU instruction sets that remain popular and have actively maintained kernel ports tend to all be used across multiple licensees. [ See the new nds32 port merged in the previous commit for the next generation of "one company in charge of an SoC line, a CPU microarchitecture and a software ecosystem" - Linus ] The removal came out of a discussion that is now documented at https://lwn.net/Articles/748074/. Unlike the original plans, I'm not marking any ports as deprecated but remove them all at once after I made sure that they are all unused. Some architectures (notably tile, mn10300, and blackfin) are still being shipped in products with old kernels, but those products will never be updated to newer kernel releases. After this series, we still have a few architectures without mainline gcc support: - unicore32 and hexagon both have very outdated gcc releases, but the maintainers promised to work on providing something newer. At least in case of hexagon, this will only be llvm, not gcc. - openrisc, risc-v and nds32 are still in the process of finishing their support or getting it added to mainline gcc in the first place. They all have patched gcc-7.3 ports that work to some degree, but complete upstream support won't happen before gcc-8.1. Csky posted their first kernel patch set last week, their situation will be similar [ Palmer Dabbelt points out that RISC-V support is in mainline gcc since gcc-7, although gcc-7.3.0 is the recommended minimum - Linus ]" This really says it all: 2498 files changed, 95 insertions(+), 467668 deletions(-) * tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (74 commits) MAINTAINERS: UNICORE32: Change email account staging: iio: remove iio-trig-bfin-timer driver tty: hvc: remove tile driver tty: remove bfin_jtag_comm and hvc_bfin_jtag drivers serial: remove tile uart driver serial: remove m32r_sio driver serial: remove blackfin drivers serial: remove cris/etrax uart drivers usb: Remove Blackfin references in USB support usb: isp1362: remove blackfin arch glue usb: musb: remove blackfin port usb: host: remove tilegx platform glue pwm: remove pwm-bfin driver i2c: remove bfin-twi driver spi: remove blackfin related host drivers watchdog: remove bfin_wdt driver can: remove bfin_can driver mmc: remove bfin_sdh driver input: misc: remove blackfin rotary driver input: keyboard: remove bf54x driver ...
2018-03-27perf vendor events s390: Add JSON files for IBM z14Thomas Richter4-0/+469
Add CPU measurement counter facility event description files (json files) for IBM z14. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180326082538.2258-5-tmricht@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-27perf vendor events s390: Add JSON files for IBM z13Thomas Richter4-0/+511
Add CPU measurement counter facility event description files (json files) for IBM z13. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180326082538.2258-4-tmricht@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-27perf vendor events s390: Add JSON files for IBM zEC12 zBC12Thomas Richter4-0/+385
Add CPU measurement counter facility event description files (json files) for IBM zEC12 and zBC12. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180326082538.2258-3-tmricht@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-27perf vendor events s390: Add JSON files for IBM z196Thomas Richter4-0/+319
Add CPU measurement counter facility event description files (json files) for IBM z196. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180326082538.2258-2-tmricht@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-27perf vendor events s390: Add JSON files for IBM z10EC z10BCThomas Richter4-0/+284
Add CPU measurement counter facility event description files (JSON files) for IBM z10EC and z10BC. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180326082538.2258-1-tmricht@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-27perf mmap: Be consistent when checking for an unmaped ring bufferArnaldo Carvalho de Melo1-1/+12
The previous patch is insufficient to cure the reported 'perf trace' segfault, as it only cures the perf_mmap__read_done() case, moving the segfault to perf_mmap__read_init() functio, fix it by doing the same refcount check. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Fixes: 8872481bd048 ("perf mmap: Introduce perf_mmap__read_init()") Link: https://lkml.kernel.org/r/20180326144127.GF18897@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-27perf mmap: Fix accessing unmapped mmap in perf_mmap__read_done()Kan Liang1-0/+6
There is a segmentation fault when running 'perf trace'. For example: [root@jouet e]# perf trace -e *chdir -o /tmp/bla perf report --ignore-vmlinux -i ../perf.data The perf_mmap__consume() could unmap the mmap. It needs to check the refcnt in perf_mmap__read_done(). Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Fixes: ee023de05f35 ("perf mmap: Introduce perf_mmap__read_done()") Link: http://lkml.kernel.org/r/1522071729-16776-1-git-send-email-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-27perf build: Fix check-headers.sh opts assignmentJiri Olsa1-0/+1
Currently the "opts" variable is not zero-ed and we keep on adding to it, ending up with: $ check-headers.sh 2>&1 + opts=' "-B"' + opts=' "-B" "-B"' + opts=' "-B" "-B" "-B"' + opts=' "-B" "-B" "-B" "-B"' + opts=' "-B" "-B" "-B" "-B" "-B"' + opts=' "-B" "-B" "-B" "-B" "-B" "-B"' Fix this by initializing it in the check() function, right before starting the loop. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180321140515.2252-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-23perf annotate: Use absolute addresses to calculate jump target offsetsArnaldo Carvalho de Melo1-3/+2
These types of jumps were confusing the annotate browser: entry_SYSCALL_64 /lib/modules/4.16.0-rc5-00086-gdf09348f78dc/build/vmlinux entry_SYSCALL_64 /lib/modules/4.16.0-rc5-00086-gdf09348f78dc/build/vmlinux Percent│ffffffff81a00020: swapgs <SNIP> │ffffffff81a00128: ↓ jae ffffffff81a00139 <syscall_return_via_sysret+0x53> <SNIP> │ffffffff81a00155: → jmpq *0x825d2d(%rip) # ffffffff82225e88 <pv_cpu_ops+0xe8> I.e. the syscall_return_via_sysret function is actually "inside" the entry_SYSCALL_64 function, and the offsets in jumps like these (+0x53) are relative to syscall_return_via_sysret, not to syscall_return_via_sysret. Or this may be some artifact in how the assembler marks the start and end of a function and how this ends up in the ELF symtab for vmlinux, i.e. syscall_return_via_sysret() isn't "inside" entry_SYSCALL_64, but just right after it. From readelf -sw vmlinux: 80267: ffffffff81a00020 315 NOTYPE GLOBAL DEFAULT 1 entry_SYSCALL_64 316: ffffffff81a000e6 0 NOTYPE LOCAL DEFAULT 1 syscall_return_via_sysret 0xffffffff81a00020 + 315 > 0xffffffff81a000e6 So instead of looking for offsets after that last '+' sign, calculate offsets for jump target addresses that are inside the function being disassembled from the absolute address, 0xffffffff81a00139 in this case, subtracting from it the objdump address for the start of the function being disassembled, entry_SYSCALL_64() in this case. So, before this patch: entry_SYSCALL_64 /lib/modules/4.16.0-rc5-00086-gdf09348f78dc/build/vmlinux Percent│ pop %r10 │ pop %r9 │ pop %r8 │ pop %rax │ pop %rsi │ pop %rdx │ pop %rsi │ mov %rsp,%rdi │ mov %gs:0x5004,%rsp │ pushq 0x28(%rdi) │ pushq (%rdi) │ push %rax │ ↑ jmp 6c │ mov %cr3,%rdi │ ↑ jmp 62 │ mov %rdi,%rax │ and $0x7ff,%rdi │ bt %rdi,%gs:0x2219a │ ↑ jae 53 │ btr %rdi,%gs:0x2219a │ mov %rax,%rdi │ ↑ jmp 5b After: entry_SYSCALL_64 /lib/modules/4.16.0-rc5-00086-gdf09348f78dc/build/vmlinux 0.65 │ → jne swapgs_restore_regs_and_return_to_usermode │ pop %r10 │ pop %r9 │ pop %r8 │ pop %rax │ pop %rsi │ pop %rdx │ pop %rsi │ mov %rsp,%rdi │ mov %gs:0x5004,%rsp │ pushq 0x28(%rdi) │ pushq (%rdi) │ push %rax │ ↓ jmp 132 │ mov %cr3,%rdi │ ┌──jmp 128 │ │ mov %rdi,%rax │ │ and $0x7ff,%rdi │ │ bt %rdi,%gs:0x2219a │ │↓ jae 119 │ │ btr %rdi,%gs:0x2219a │ │ mov %rax,%rdi │ │↓ jmp 121 │119:│ mov %rax,%rdi │ │ bts $0x3f,%rdi │121:│ or $0x800,%rdi │128:└─→or $0x1000,%rdi │ mov %rdi,%cr3 │132: pop %rax │ pop %rdi │ pop %rsp │ → jmpq *0x825d2d(%rip) # ffffffff82225e88 <pv_cpu_ops+0xe8> With those at least navigating to the right destination, an improvement for these cases seems to be to be to somehow mark those inner functions, which in this case could be: entry_SYSCALL_64 /lib/modules/4.16.0-rc5-00086-gdf09348f78dc/build/vmlinux │syscall_return_via_sysret: │ pop %r15 │ pop %r14 │ pop %r13 │ pop %r12 │ pop %rbp │ pop %rbx │ pop %rsi │ pop %r10 │ pop %r9 │ pop %r8 │ pop %rax │ pop %rsi │ pop %rdx │ pop %rsi │ mov %rsp,%rdi │ mov %gs:0x5004,%rsp │ pushq 0x28(%rdi) │ pushq (%rdi) │ push %rax │ ↓ jmp 132 │ mov %cr3,%rdi │ ┌──jmp 128 │ │ mov %rdi,%rax │ │ and $0x7ff,%rdi │ │ bt %rdi,%gs:0x2219a │ │↓ jae 119 │ │ btr %rdi,%gs:0x2219a │ │ mov %rax,%rdi │ │↓ jmp 121 │119:│ mov %rax,%rdi │ │ bts $0x3f,%rdi │121:│ or $0x800,%rdi │128:└─→or $0x1000,%rdi │ mov %rdi,%cr3 │132: pop %rax │ pop %rdi │ pop %rsp │ → jmpq *0x825d2d(%rip) # ffffffff82225e88 <pv_cpu_ops+0xe8> This all gets much better viewed if one uses 'perf report --ignore-vmlinux' forcing the usage of /proc/kcore + /proc/kallsyms, when the above actually gets down to: # perf report --ignore-vmlinux ## do '/64', will show the function names containing '64', ## navigate to /entry_SYSCALL_64_after_hwframe.annotation, ## press 'A' to annotate, then 'P' to print that annotation ## to a file ## From another xterm (or see on screen, this 'P' thing is for ## getting rid of those right side scroll bars/spaces): # cat /entry_SYSCALL_64_after_hwframe.annotation entry_SYSCALL_64_after_hwframe() /proc/kcore Event: cycles:ppp Percent Disassembly of section load0: ffffffff9aa00044 <load0>: 11.97 push %rax 4.85 push %rdi push %rsi 2.59 push %rdx 2.27 push %rcx 0.32 pushq $0xffffffffffffffda 1.29 push %r8 xor %r8d,%r8d 1.62 push %r9 0.65 xor %r9d,%r9d 1.62 push %r10 xor %r10d,%r10d 5.50 push %r11 xor %r11d,%r11d 3.56 push %rbx xor %ebx,%ebx 4.21 push %rbp xor %ebp,%ebp 2.59 push %r12 0.97 xor %r12d,%r12d 3.24 push %r13 xor %r13d,%r13d 2.27 push %r14 xor %r14d,%r14d 4.21 push %r15 xor %r15d,%r15d 0.97 mov %rsp,%rdi 5.50 → callq do_syscall_64 14.56 mov 0x58(%rsp),%rcx 7.44 mov 0x80(%rsp),%r11 0.32 cmp %rcx,%r11 → jne swapgs_restore_regs_and_return_to_usermode 0.32 shl $0x10,%rcx 0.32 sar $0x10,%rcx 3.24 cmp %rcx,%r11 → jne swapgs_restore_regs_and_return_to_usermode 2.27 cmpq $0x33,0x88(%rsp) 1.29 → jne swapgs_restore_regs_and_return_to_usermode mov 0x30(%rsp),%r11 8.74 cmp %r11,0x90(%rsp) → jne swapgs_restore_regs_and_return_to_usermode 0.32 test $0x10100,%r11 → jne swapgs_restore_regs_and_return_to_usermode 0.32 cmpq $0x2b,0xa0(%rsp) 0.65 → jne swapgs_restore_regs_and_return_to_usermode I.e. using kallsyms makes the function start/end be done differently than using what is in the vmlinux ELF symtab and actually the hits goes to entry_SYSCALL_64_after_hwframe, which is a GLOBAL() after the start of entry_SYSCALL_64: ENTRY(entry_SYSCALL_64) UNWIND_HINT_EMPTY <SNIP> pushq $__USER_CS /* pt_regs->cs */ pushq %rcx /* pt_regs->ip */ GLOBAL(entry_SYSCALL_64_after_hwframe) pushq %rax /* pt_regs->orig_ax */ PUSH_AND_CLEAR_REGS rax=$-ENOSYS And it goes and ends at: cmpq $__USER_DS, SS(%rsp) /* SS must match SYSRET */ jne swapgs_restore_regs_and_return_to_usermode /* * We win! This label is here just for ease of understanding * perf profiles. Nothing jumps here. */ syscall_return_via_sysret: /* rcx and r11 are already restored (see code above) */ UNWIND_HINT_EMPTY POP_REGS pop_rdi=0 skip_r11rcx=1 So perhaps some people should really just play with '--ignore-vmlinux' to force /proc/kcore + kallsyms. One idea is to do both, i.e. have a vmlinux annotation and a kcore+kallsyms one, when possible, and even show the patched location, etc. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-r11knxv8voesav31xokjiuo6@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-23perf annotate: Defer searching for comma in raw line till it is neededArnaldo Carvalho de Melo1-1/+2
That strchr() in jump__scnprintf() needs to be nuked somehow, as it, IIRC is already done in jump__parse() and if needed at scnprintf() time, should be stashed in the struct filled in parse() time. For now jus defer it to just before where it is used. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-j0t5hagnphoz9xw07bh3ha3g@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-23perf annotate: Support jumping from one function to anotherArnaldo Carvalho de Melo2-7/+22
For instance: entry_SYSCALL_64 /lib/modules/4.16.0-rc5-00086-gdf09348f78dc/build/vmlinux 5.50 │ → callq do_syscall_64 14.56 │ mov 0x58(%rsp),%rcx 7.44 │ mov 0x80(%rsp),%r11 0.32 │ cmp %rcx,%r11 │ → jne swapgs_restore_regs_and_return_to_usermode 0.32 │ shl $0x10,%rcx 0.32 │ sar $0x10,%rcx 3.24 │ cmp %rcx,%r11 │ → jne swapgs_restore_regs_and_return_to_usermode 2.27 │ cmpq $0x33,0x88(%rsp) 1.29 │ → jne swapgs_restore_regs_and_return_to_usermode │ mov 0x30(%rsp),%r11 8.74 │ cmp %r11,0x90(%rsp) │ → jne swapgs_restore_regs_and_return_to_usermode 0.32 │ test $0x10100,%r11 │ → jne swapgs_restore_regs_and_return_to_usermode 0.32 │ cmpq $0x2b,0xa0(%rsp) 0.65 │ → jne swapgs_restore_regs_and_return_to_usermode It'll behave just like a "call" instruction, i.e. press enter or right arrow over one such line and the browser will navigate to the annotated disassembly of that function, which when exited, via left arrow or esc, will come back to the calling function. Now to support jump to an offset on a different function... Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-78o508mqvr8inhj63ddtw7mo@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-23perf annotate: Add "_local" to jump/offset validation routinesArnaldo Carvalho de Melo3-9/+16
Because they all really check if we can access data structures/visual constructs where a "jump" instruction targets code in the same function, i.e. things like: __pthread_mutex_lock /usr/lib64/libpthread-2.26.so 1.95 │ mov __pthread_force_elision,%ecx │ ┌──test %ecx,%ecx 0.07 │ ├──je 60 │ │ test $0x300,%esi │ │↓ jne 60 │ │ or $0x100,%esi │ │ mov %esi,0x10(%rdi) │ 42:│ mov %esi,%edx │ │ lea 0x16(%r8),%rsi │ │ mov %r8,%rdi │ │ and $0x80,%edx │ │ add $0x8,%rsp │ │→ jmpq __lll_lock_elision │ │ nop 0.29 │ 60:└─→and $0x80,%esi 0.07 │ mov $0x1,%edi 0.29 │ xor %eax,%eax 2.53 │ lock cmpxchg %edi,(%r8) And not things like that "jmpq __lll_lock_elision", that instead should behave like a "call" instruction and "jump" to the disassembly of "___lll_lock_elision". Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-3cwx39u3h66dfw9xjrlt7ca2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-23perf python: Reference Py_None before returning itPetr Machata1-1/+3
Python None objects are handled just like all the other objects with respect to their reference counting. Before returning Py_None, its reference count thus needs to be bumped. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Machata <petrm@mellanox.com> Link: http://lkml.kernel.org/r/b1e565ecccf68064d8d54f37db5d028dda8fa522.1521675563.git.petrm@mellanox.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-21perf annotate: Mark jumps to outher functions with the call arrowArnaldo Carvalho de Melo2-3/+53
Things like this in _cpp_lex_token (gcc's cc1 program): cpp_named_operator2name@@Base+0xa72 Point to a place that is after the cpp_named_operator2name boundaries, i.e. in the ELF symbol table for cc1 cpp_named_operator2name is marked as being 32-bytes long, but it in fact is much larger than that, so we seem to need a symbols__find() routine that looks for >= current->start and < next_symbol->start, possibly just for C++ objects? For now lets just make some progress by marking jumps to outside the current function as call like. Actual navigation will come next, with further understanding of how the symbol searching and disassembly should be done. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-aiys0a0bsgm3e00hbi6fg7yy@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-21perf annotate: Pass function descriptor to its instruction parsing routinesArnaldo Carvalho de Melo3-16/+21
We need that to figure out if jumps have targets in a different function. E.g. _cpp_lex_token(), in /usr/libexec/gcc/x86_64-redhat-linux/5.3.1/cc1 has a line like this: jne c469be <cpp_named_operator2name@@Base+0xa72> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-ris0ioziyp469pofpzix2atb@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-21perf annotate: No need to calculate notes->start twiceArnaldo Carvalho de Melo1-5/+4
Since we already set notes->start to map__rip_2objdump(map, sym->start) in symbol__annotate2(), no need to calculate that address again in symbol__calc_lines(), just use notes->start. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-ycxlg8mm5ueuj21w6gi62l7g@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-21perf annotate browser: Add 'P' hotkey to dump annotation to fileArnaldo Carvalho de Melo3-0/+37
Just like we have in the histograms browser used as the main screen for 'perf top --tui' and 'perf report --tui', to print the current annotation to a file with a named composed by the symbol name and the ".annotation" suffix. Here is one example of pressing 'A' on 'perf top' to live annotate a kernel function and then press 'P' to dump that annotation, the resulting file: # cat _raw_spin_lock_irqsave.annotation _raw_spin_lock_irqsave() /proc/kcore Event: cycles:ppp 7.14 nop 21.43 push %rbx 7.14 pushfq pop %rax nop mov %rax,%rbx cli nop xor %eax,%eax mov $0x1,%edx 64.29 lock cmpxchg %edx,(%rdi) test %eax,%eax ↓ jne 2b mov %rbx,%rax pop %rbx ← retq 2b: mov %eax,%esi → callq queued_spin_lock_slowpath mov %rbx,%rax pop %rbx ← retq # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-zzmnrwugb5vtk7bvg0rbx150@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-21perf report: Introduce --ignore-vmlinux command line optionArnaldo Carvalho de Melo2-0/+5
We've had this in 'perf top' for quite a while, useful if one wishes to force using /proc/kcore to do annotation using the patched kernel instead of the ELF image it started from, aka vmlinux. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-ircpvox4wzsv7gasrpb28fw9@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-21perf annotate: Introduce --ignore-vmlinux command line optionArnaldo Carvalho de Melo2-0/+5
This is already present in 'perf top', albeit undocumented (will fix), and is useful to use /proc/kcore instead of vmlinux and then get what is really in place, not what the kernel starts with, before alternatives, ftrace .text patching, etc, see the differences: # perf annotate --stdio2 _raw_spin_lock_irqsave _raw_spin_lock_irqsave() /lib/modules/4.16.0-rc4/build/vmlinux Event: anon group { cycles, instructions } 0.00 3.17 → callq __fentry__ 0.00 7.94 push %rbx 7.69 36.51 → callq __page_file_index mov %rax,%rbx 7.69 3.17 → callq *ffffffff82225cd0 xor %eax,%eax mov $0x1,%edx 80.77 49.21 lock cmpxchg %edx,(%rdi) test %eax,%eax ↓ jne 2b 3.85 0.00 mov %rbx,%rax pop %rbx ← retq 2b: mov %eax,%esi → callq queued_spin_lock_slowpath mov %rbx,%rax pop %rbx ← retq [root@jouet ~]# perf annotate --ignore-vmlinux --stdio2 _raw_spin_lock_irqsave _raw_spin_lock_irqsave() /proc/kcore Event: anon group { cycles, instructions } 0.00 3.17 nop 0.00 7.94 push %rbx 0.00 23.81 pushfq 7.69 12.70 pop %rax nop mov %rax,%rbx 7.69 3.17 cli nop xor %eax,%eax mov $0x1,%edx 80.77 49.21 lock cmpxchg %edx,(%rdi) test %eax,%eax ↓ jne 2b 3.85 0.00 mov %rbx,%rax pop %rbx ← retq 2b: mov %eax,%esi → callq *ffffffff820e96b0 mov %rbx,%rax pop %rbx ← retq # Diff of the output of those commands: # perf annotate --stdio2 _raw_spin_lock_irqsave > /tmp/vmlinux # perf annotate --ignore-vmlinux --stdio2 _raw_spin_lock_irqsave > /tmp/kcore # diff -y /tmp/vmlinux /tmp/kcore _raw_spin_lock_irqsave() vmlinux | _raw_spin_lock_irqsave() /proc/kcore Event: anon group { cycles, instructions } Event: anon group { cycles, instructions } 0.00 3.17 → callq __fentry__ | 0.00 3.17 nop 0.00 7.94 push %rbx 0.00 7.94 push %rbx 7.69 36.51 → callq __page_file_index | 0.00 23.81 pushfq > 7.69 12.70 pop %rax > nop mov %rax,%rbx mov %rax,%rbx 7.69 3.17 → callq *ffffffff82225cd0 | 7.69 3.17 cli > nop xor %eax,%eax xor %eax,%eax mov $0x1,%edx mov $0x1,%edx 80.77 49.21 lock cmpxchg %edx,(%rdi) 80.77 49.21 lock cmpxchg %edx,(%rdi) test %eax,%eax test %eax,%eax ↓ jne 2b ↓ jne 2b 3.85 0.00 mov %rbx,%rax 3.85 0.00 mov %rbx,%rax pop %rbx pop %rbx ← retq ← retq 2b: mov %eax,%esi 2b: mov %eax,%esi → callq queued_spin_lock_slowpath| → callq *ffffffff820e96b0 mov %rbx,%rax mov %rbx,%rax pop %rbx pop %rbx ← retq ← retq # This should be further streamlined by doing both annotations and allowing the TUI to toggle initial/current, and show the patched instructions in a slightly different color. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-wz8d269hxkcwaczr0r4rhyjg@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-21perf annotate: Add function header to --stdio2Arnaldo Carvalho de Melo1-0/+8
# perf annotate --stdio2 _raw_spin_lock_irqsave _raw_spin_lock_irqsave() /lib/modules/4.16.0-rc4/build/vmlinux Event: anon group { cycles, instructions } 0.00 3.17 → callq __fentry__ 0.00 7.94 push %rbx 7.69 36.51 → callq __page_file_index mov %rax,%rbx 7.69 3.17 → callq *ffffffff82225cd0 xor %eax,%eax mov $0x1,%edx 80.77 49.21 lock cmpxchg %edx,(%rdi) test %eax,%eax ↓ jne 2b 3.85 0.00 mov %rbx,%rax pop %rbx ← retq 2b: mov %eax,%esi → callq queued_spin_lock_slowpath mov %rbx,%rax pop %rbx ← retq # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-i86yfyzl8m194ioxgj1jo32f@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-21perf annotate: Use the default annotation options for --stdio2Arnaldo Carvalho de Melo1-3/+1
With an empty '[annotate]' section in ~/.perfconfig: # perf record -a --all-kernel -e '{cycles,instructions}:P' sleep 5 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 2.243 MB perf.data (5513 samples) ] # perf annotate --stdio2 _raw_spin_lock | head -20 Disassembly of section .text: ffffffff81868790 <_raw_spin_lock>: _raw_spin_lock(): EXPORT_SYMBOL(_raw_spin_trylock_bh); #endif #ifndef CONFIG_INLINE_SPIN_LOCK void __lockfunc _raw_spin_lock(raw_spinlock_t *lock) { → callq __fentry__ atomic_cmpxchg(): return xadd(&v->counter, -i); } static __always_inline int atomic_cmpxchg(atomic_t *v, int old, int new) { # perf annotate --stdio2 _raw_spin_lock | head -20 → callq __fentry__ xor %eax,%eax mov $0x1,%edx 87.50 100.00 lock cmpxchg %edx,(%rdi) 6.25 0.00 test %eax,%eax ↓ jne 16 6.25 0.00 repz retq 16: mov %eax,%esi ↑ jmpq ffffffff810e96b0 <queued_spin_lock_slowpath> # # cat ~/.perfconfig [annotate] hide_src_code = false show_linenr = true # perf annotate --stdio2 _raw_spin_lock | head -20 3 Disassembly of section .text: 5 ffffffff81868790 <_raw_spin_lock>: 6 _raw_spin_lock(): 143 EXPORT_SYMBOL(_raw_spin_trylock_bh); 144 #endif 146 #ifndef CONFIG_INLINE_SPIN_LOCK 147 void __lockfunc _raw_spin_lock(raw_spinlock_t *lock) 148 { → callq __fentry__ 150 atomic_cmpxchg(): 187 return xadd(&v->counter, -i); 188 } 190 static __always_inline int atomic_cmpxchg(atomic_t *v, int old, int new) 191 { # # cat ~/.perfconfig [annotate] hide_src_code = true show_total_period = true # perf annotate --stdio2 _raw_spin_lock | head -20 → callq __fentry__ xor %eax,%eax mov $0x1,%edx 1411316 152339 lock cmpxchg %edx,(%rdi) 344694 0 test %eax,%eax ↓ jne 16 80806 0 repz retq 16: mov %eax,%esi ↑ jmpq ffffffff810e96b0 <queued_spin_lock_slowpath> # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-nu4rxg5zkdtgs1b2gc40p7v7@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-21perf annotate: Move the default annotate options to the libraryArnaldo Carvalho de Melo8-69/+72
One more thing that goes from the TUI code to be used more widely, for instance it'll affect the default options used by: perf annotate --stdio2 Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-0nsz0dm0akdbo30vgja2a10e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-21perf annotate: Introduce the --stdio2 output modeArnaldo Carvalho de Melo4-7/+115
This uses the TUI augmented formatting routines, modulo interactivity. # perf annotate --ignore-vmlinux --stdio2 _raw_spin_lock_irqsave _raw_spin_lock_irqsave() /proc/kcore Event: cycles:ppp Percent Disassembly of section load0: ffffffff9a8734b0 <load0>: nop push %rbx 50.00 pushfq pop %rax nop mov %rax,%rbx cli nop xor %eax,%eax mov $0x1,%edx 50.00 lock cmpxchg %edx,(%rdi) test %eax,%eax ↓ jne 2b mov %rbx,%rax pop %rbx ← retq 2b: mov %eax,%esi → callq queued_spin_lock_slowpath mov %rbx,%rax pop %rbx ← retq Tested-by: Jin Yao <yao.jin@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-6cte5o8z84mbivbvqlg14uh1@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-20perf annotate: Introduce annotation_line__filter()Arnaldo Carvalho de Melo2-12/+11
Out of the TUI logic that allows toggling the presentation of source code lines. Will be used in the upcoming --stdio2 mode. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-g0ckz9ajy6unswrv2iy39mxk@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-20perf annotate: Use a ops table for annotation_line__write()Arnaldo Carvalho de Melo3-42/+53
To simplify the passing of arguments, the --stdio2 code will have to set all the fields with operations printing to stdout. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-pcs3c7vdy9ucygxflo4nl1o7@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-20perf annotate: Finish the generalization of annotate_browser__write()Arnaldo Carvalho de Melo3-96/+127
We pass some more callbacks and all of annotate_browser__write() seems to be free of TUI code (except for some arrow constants, will fix). Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-5uo6yvwnxtsbe8y6v0ysaakf@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-20perf annotate: Introduce annotation_line__print_start() out of TUI codeArnaldo Carvalho de Melo3-61/+101
For the --tui and --stdio2 cases using callbacks for print() and set_percent_color() end up being the easiest path, real GUI remains as an exercise. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-1o7az1ng55g2g6ppr2jpeuct@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-20perf ui browser: Add vprintf() methodArnaldo Carvalho de Melo2-1/+8
We'll need it for some callbacks for the upcoming annotation__line_print() routines. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-t3qiobj4ua38xzsq8cyw9ky5@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-20perf annotate: Introduce annotation_line__max_percent()Arnaldo Carvalho de Melo3-6/+18
Out of the annotate_browser__write() routine, to be used in the --stdio2 mode. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-0he0wyy4haswqi1qb35x37do@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-20perf annotate: Introduce symbol__annotate2 methodArnaldo Carvalho de Melo3-27/+44
That does all the extended boilerplate the TUI browser did, leaving the symbol__annotate() function to be used by the old --stdio output mode. Now the upcoming --stdio2 output mode should just use this one to set things up. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-e2x8wuf6gvdhzdryo229vj4i@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-20perf annotate: Introduce init_column_widths() method out of TUI codeArnaldo Carvalho de Melo3-13/+19
More non-TUI stuff goes to the UI-agnostic library Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-hngv7rpqvtta69ouj7ne770q@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-20perf annotate: Move update_column_widths() to the generic libArnaldo Carvalho de Melo3-13/+14
Previous patch left it where it was to ease review, move it to its right place. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-ikdjr014p7k5kachgyjrgiey@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-20perf annotate: Move the column widths from the TUI to generic libArnaldo Carvalho de Melo2-26/+26
This also will be used in other output formats, such as --stdio2. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-86h6ftebc62ij1rx8q9zkpwk@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-20perf annotate: Introduce set_offsets() method out of TUI codeArnaldo Carvalho de Melo3-22/+33
More non-strictly TUI code being moved to the UI neutral annotation library, to be used in the upcoming --stdio2 output mode. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-ek20dnd8z2y5v54pcepihybz@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-20perf annotate: Move nr_{asm_}entries to struct annotationArnaldo Carvalho de Melo2-12/+13
More non-TUI stuff. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-yd4g6q0rngq4i49hz6iymtta@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-20perf annotate: Move 'start' to struct annotationArnaldo Carvalho de Melo2-3/+3
Another field that is not TUI specific. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-jj3dwswndft5mln8hu9k0idv@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-20perf annotate: Nuke struct browser_lineArnaldo Carvalho de Melo2-46/+22
The information in there are all related to things already moved to struct annotation, so move those members to struct annotation_line. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-uc2b9c8iocvuuvbl7hyind84@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-20perf annotate: Move mark_jump_targets from the TUI to the annotation libraryArnaldo Carvalho de Melo3-51/+51
This also is not TUI specific, should be used in the upcoming --stdio2 mode. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-v827xec8z3hxrmgp7bwa6ohs@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-20perf annotate: Move nr_jumps to struct annotationArnaldo Carvalho de Melo2-9/+5
This is another information that will be useful for the --stdio2 mode, to provide symbol statistics, so move it from the TUI and change the mark_jump_targets() method to struct annotation. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-kpgle1qxe7thajvrqleuvi80@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-20perf annotate: Move jumps_percent_color to ui_browserArnaldo Carvalho de Melo1-10/+8
Since all it needs is in ui_browser and annotation structs members. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-9f8c2f9aetbibcw33d615y9o@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-20perf annotate: Move max_jump_sources to struct annotationArnaldo Carvalho de Melo2-5/+7
This is not useful only for the TUI, we'll want to somehow mark the --stdio2 lines with the most jump sources too. And moving this will allow us to change some function signatures from annotate_browser to ui_browser, reducing boilerplate. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-vyggbbqd05k3k4mvv7z9l5px@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-20perf annotate tui: Add browser__annotation() helperArnaldo Carvalho de Melo1-24/+16
To reduce the boilerplate to get to the symbol being annotated from the struct browser ->priv area. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-ficdyqhe9esjseflvkriskwn@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-20perf annotate: Move pcnt_with() to the annotation libraryArnaldo Carvalho de Melo2-11/+8
Out of the TUI code, since now all it touches is what is in 'struct annotation'. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-kh5bbbgd7l4agv9oc5hnw0ui@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-20perf annotate: Stop using a global config structArnaldo Carvalho de Melo2-34/+51
For the TUI, that is interactive, its interesting to have a configuration that one can go on changing and then when moving from one symbol annotation to another symbol, the options set while browsing the first symbol to be kept. But since we're trying to make this code reusable by a --stdio formatter, we better have a pointer in struct annotation and in the TUI case set it to the global, but use something else for other cases, such as --stdio2. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-kv1ngr159jfu5h9ddgiuwcvg@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-20perf annotate: Move nr_events from annotate_browser to annotation structArnaldo Carvalho de Melo2-5/+7
Paving the way to move more stuff out of TUI and into the generic annotation library. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-8vqax6wgfqohelot8j8zsfvs@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-20perf annotate: Move compute_ipc() to annotation libraryArnaldo Carvalho de Melo3-68/+63
Out of the TUI code, as it has nothing specific to that UI and should be used in the other output modes as well. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-0jahghvqdodb8vu2591pkv3d@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-20perf annotate: Move annotation_line array from TUI to generic codeArnaldo Carvalho de Melo2-22/+20
This is needed to reduce the differences between the TUI mode and the other annotation UIs, next csets will move that code to the UI-neutral annotation library. Leaving it in place for now to ease review. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-gz09ahsd5xm1eip7ura5ow6x@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-20perf annotate tui: Move have_cycles to struct annotationArnaldo Carvalho de Melo2-11/+15
This is to pave the way to have more functions shared between TUI, stdio and the upcoming stdio2 formatting, that will use the __scnprintf functions used by --tui in a --stdio fashion. This partially addresses the comments added in cset 30e863bb6f70 ("perf annotate: Compute IPC and basic block cycles"): /* * This should probably be in util/annotate.c to share with the tty * annotate, but right now we need the per byte offsets arrays, * which are only here. */ The following patches will address the rest. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-yftvybgx1s8sevs6kp1an0ft@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-20perf annotate tui: Use annotate_browser__cycles_width() mroeArnaldo Carvalho de Melo1-3/+2
Instead of an open coded equivalent, will reduce a bit noise in the following patches. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-pnwn1dg9345zawhgiorpsadf@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-26 09:20:29 +0000