summaryrefslogtreecommitdiffstats
path: root/tools/perf/tests
AgeCommit message (Collapse)AuthorFilesLines
2016-08-03perf tests bpf: Use SyS_epoll_wait aliasArnaldo Carvalho de Melo1-2/+2
Something made the sys_epoll_wait() function alias not to be found in the vmlinux DWARF info, being found only in /proc/kallsyms, which made the BPF perf tests to fail: [root@jouet ~]# perf test BPF 37: Test BPF filter : 37.1: Test basic BPF filtering : FAILED! 37.2: Test BPF prologue generation : Skip 37.3: Test BPF relocation checker : Skip [root@jouet ~]# Using -v we can see it is failing to find DWARF info for the probed function, sys_epoll_wait, which we can find in /proc/kallsyms but not in vmlinux with CONFIG_DEBUG_INFO: [root@jouet ~]# grep -w sys_epoll_wait /proc/kallsyms ffffffffbd295b50 T sys_epoll_wait [root@jouet ~]# [root@jouet ~]# readelf -wi /lib/modules/4.7.0+/build/vmlinux | grep -w sys_epoll_wait [root@jouet ~]# If we try to use perf probe: [root@jouet ~]# perf probe sys_epoll_wait Failed to find debug information for address ffffffffbd295b50 Probe point 'sys_epoll_wait' not found. Error: Failed to add events. [root@jouet ~]# It all works if we use SyS_epoll_wait, that is just an alias to the probed function: [root@jouet ~]# grep -i sys_epoll_wait /proc/kallsyms ffffffffbd295b50 T SyS_epoll_wait ffffffffbd295b50 T sys_epoll_wait [root@jouet ~]# So use it: [root@jouet ~]# perf test BPF 37: Test BPF filter : 37.1: Test basic BPF filtering : Ok 37.2: Test BPF prologue generation : Ok 37.3: Test BPF relocation checker : Ok [root@jouet ~]# Further info: [root@jouet ~]# gcc --version gcc (GCC) 6.1.1 20160621 (Red Hat 6.1.1-3) [acme@jouet linux]$ cat /etc/fedora-release Fedora release 24 (Twenty Four) Investigation as to why it fails is still underway, but it was always going from sys_epoll_wait to SyS_epoll_wait when looking up the DWARF info in vmlinux, and this is what is breaking now. Switching to use SyS_epoll_wait allows this test to proceed and test the BPF code it was designed for, so lets have this in to allow passing this test while we fix the root cause. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-7hekjp0bodwjbb419sl2b55h@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-02perf tests: objdump output can contain multi byte chunksJan Stancek1-29/+71
objdump's raw insn output can vary across architectures on the number of bytes per chunk (bpc) displayed and their endianness. The code-reading test relied on reading objdump output as 1 bpc. Kaixu Xia reported test failure on ARM64, where objdump displays 4 bpc: 70c48: f90027bf str xzr, [x29,#72] 70c4c: 91224000 add x0, x0, #0x890 70c50: f90023a0 str x0, [x29,#64] This patch adds support to read raw insn output for any bpc length. In case of 2+ bpc it also guesses objdump's display endian. Reported-and-Tested-by: Kaixu Xia <xiakaixu@huawei.com> Signed-off-by: Jan Stancek <jstancek@redhat.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/07f0f7bcbda78deb423298708ef9b6a54d6b92bd.1452592712.git.jstancek@redhat.com [ Fix up pr_fmt() call to use %zd for size_t variables, fixing the build on Ubuntu cross-compiling to armhf and ppc64 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-02perf tests: Add test for bitmap_scnprintf functionJiri Olsa4-0/+59
Automatically test the bitmap_scnprintf function. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1470074555-24889-5-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-22perf tests kmod-path: Fix build on ubuntu:16.04-x-armhfArnaldo Carvalho de Melo1-0/+1
Cross building it on Ubuntu 16.04 to ARM ends up showing we get the free() prototype by luck in other environments, fix it. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-0ktfgmmyhcfw8ondka2013f3@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-18perf tests: Add is_printable_array testJiri Olsa4-0/+42
Add automated test for is_printable_array function. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Pirko <jiri@mellanox.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1468685480-18951-4-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-15perf tools: Enable overwrite settingsWang Nan1-5/+5
This patch allows following config terms and option: Globally setting events to overwrite; # perf record --overwrite ... Set specific events to be overwrite or no-overwrite. # perf record --event cycles/overwrite/ ... # perf record --event cycles/no-overwrite/ ... Add missing config terms and update the config term array size because the longest string length has changed. For overwritable events, it automatically selects attr.write_backward since perf requires it to be backward for reading. Test result: # perf record --overwrite -e syscalls:*enter_nanosleep* usleep 1 [ perf record: Woken up 2 times to write data ] [ perf record: Captured and wrote 0.011 MB perf.data (1 samples) ] # perf evlist -v syscalls:sys_enter_nanosleep: type: 2, size: 112, config: 0x134, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW, disabled: 1, inherit: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, write_backward: 1 # Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1468485287-33422-14-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-15perf evlist: Drop evlist->backwardWang Nan1-1/+0
Now there's no real user of evlist->backward. Drop it. We are going to use evlist->backward_mmap as a container for backward ring buffer. Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: He Kuang <hekuang@huawei.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1468485287-33422-10-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-15perf evlist: Map backward events to backward_mmapWang Nan1-2/+2
In perf_evlist__mmap_per_evsel(), select backward_mmap for backward events. Utilize new perf_mmap APIs. Dynamically alloc backward_mmap. Remove useless functions. Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: He Kuang <hekuang@huawei.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1468485287-33422-9-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-15perf evlist: Drop redundant evsel->overwrite indicatorArnaldo Carvalho de Melo1-0/+1
evsel->overwrite indicator means an event should be put into overwritable ring buffer. In current implementation, it equals to evsel->attr.write_backward. To reduce compliexity, remove evsel->overwrite, use evsel->attr.write_backward instead. In addition, in __perf_evsel__open(), if kernel doesn't support write_backward and user explicitly set it in evsel, don't fallback like other missing feature, since it is meaningless to fall back to a forward ring buffer in this case: we are unable to stably read from an forward overwritable ring buffer. Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1468485287-33422-2-git-send-email-wangnan0@huawei.com Signed-off-by: Wang Nan <wangnan0@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-13perf test: Add a test case for SDT eventMasami Hiramatsu4-0/+121
Add a basic test case for SDT event support. This test scans an SDT event in perftools and check whether the SDT event is correctly stored into the buildid cache. Here is an example: ---- $ perf test sdt -v 47: Test SDT event probing : --- start --- test child forked, pid 20732 Found 72 SDTs in /home/mhiramat/ksrc/linux/tools/perf/perf Writing cache: %sdt_perf:test_target=test_target Cache committed: 0 symbol:test_target file:(null) line:0 offset:0 return:0 lazy:(null) test child finished with 0 ---- end ---- Test SDT event probing: Ok ---- Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/146831796546.17065.1502584370844087537.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-13perf build: Add sdt feature detectionMasami Hiramatsu1-1/+2
This checks whether sys/sdt.h is available or not, which is required for DTRACE_PROBE(). We can disable this feature by passing NO_SDT=1 when building. This flag will be used for SDT test case and further SDT events in perftools. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/146831795615.17065.17513820540591053933.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12perf test bpf: Use epoll_wait() instead of epoll_pwait()Arnaldo Carvalho de Melo2-5/+5
The prototype for epoll_wait() is available in older distros, so use it instead of epoll_pwait() (removing the last NULL arg, the sigmask, makes it the same thing anyway) to avoid breaking the build. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-pwiwizloxt0jujy8em80qut3@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12perf tools: Remove needless includes from cache.hArnaldo Carvalho de Melo1-0/+1
The cache.h header doesn't use any of the definitions in some of the headers it includes, ditch them and fix the fallout, where files were getting stuff they needed just because they were including it, sometimes not using what it really exports at all. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-l6r2bmj8h1g3e01wr981on0n@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12perf test fdarray: Add missing poll.h headerArnaldo Carvalho de Melo1-0/+1
It uses poll() but was getting the needed header by chance, do it explicitely. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-76b3c5imnl6p69j4lqewzu9l@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12perf tests cpumap: Add missing headersArnaldo Carvalho de Melo1-0/+7
It was getting all sort of needed stuff by sheer luck, via indirect includes, fix it. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-tvjgo39t8k0ye6dntv3knran@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12perf tests openat-syscall-tp-fields: Add some conditional definesArnaldo Carvalho de Melo1-0/+7
These were only defined if _GNU_SOURCE was set in older glibc versions, check that and provide the defines in such cases. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-b8esouhpg4tk6vi4n3d7ipch@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12perf tests: Add missing pthread.h include for CPU_*() macrosArnaldo Carvalho de Melo3-0/+9
Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-dfcynqzvecsu55zmpxub9jgv@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12tools: Introduce str_error_r()Arnaldo Carvalho de Melo11-22/+22
The tools so far have been using the strerror_r() GNU variant, that returns a string, be it the buffer passed or something else. But that, besides being tricky in cases where we expect that the function using strerror_r() returns the error formatted in a provided buffer (we have to check if it returned something else and copy that instead), breaks the build on systems not using glibc, like Alpine Linux, where musl libc is used. So, introduce yet another wrapper, str_error_r(), that has the GNU interface, but uses the portable XSI variant of strerror_r(), so that users rest asured that the provided buffer is used and it is what is returned. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-d4t42fnf48ytlk8rjxs822tf@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-04perf tests: Fix hist accumulation testJiri Olsa1-0/+4
User's values from .perfconfig could overload the default callchain setup and cause this test to fail. Making sure the test is using default callchain_param values. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1467634583-29147-3-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-30perf tools: Change cpu_map__fprintf outputJiri Olsa3-0/+29
Display cpu map in standard list form. (perf report -D output on perf stat data). before: 0x590 [0x18]: PERF_RECORD_CPU_MAP nr: 4 cpus: 0, 1, 2, 3 after: 0x590 [0x18]: PERF_RECORD_CPU_MAP: 0-3 Adding automated testcase. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1467113345-12669-4-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-30perf test: Add -F/--dont-fork optionJiri Olsa1-22/+33
Adding -F/--dont-fork option to bypass forking for each test. It's useful for debugging test. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Nilay Vaish <nilayvaish@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1467113345-12669-1-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-30perf tests: Fix thread map test for -F optionJiri Olsa1-3/+13
I hit a bug when running test suite without forking each test (-F option): $ perf test -Fv ... 34: Test thread map : --- start --- FAILED tests/thread-map.c:24 wrong comm ---- end ---- Test thread map: FAILED! The reason was the process name wasn't 'perf' as expected by the test, because other tests set the name as well. Setting it explicitly now. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Nilay Vaish <nilayvaish@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1467113345-12669-3-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-30perf tools: Allow to reset open files counterJiri Olsa1-0/+6
I hit a bug when running test suite without forking each test (-F option): $ perf test -F dso 8: Test dso data read : Ok 9: Test dso data cache : FAILED! 10: Test dso data reopen : FAILED! The reason the session file limit is set just once for perf process so we need to reset it for each test, otherwise wrong limit is taken into account. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Nilay Vaish <nilayvaish@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1467113345-12669-2-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-28perf build: Add libbabeltrace to build-testWang Nan1-0/+2
'make build-test' doesn't test LIBBABELTRACE=1. It misses a building failure caused by commit 41840d211c51 ("perf config: Move config declarations from util/cache.h to util/config.h"), breaks bisect. Add LIBBABELTRACE=1 to build-test. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1466818918-131281-1-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-23perf evlist: Rename for_each() macros to for_each_entry()Arnaldo Carvalho de Melo7-10/+10
To match the semantics for list.h in the kernel, that are used to implement those macros. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Taeung Song <treeze.taeung@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-qbcjlgj0ffxquxscahbpddi3@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-22perf evlist: Destructors should accept NULLArnaldo Carvalho de Melo2-4/+2
And do nothing, just like free(), to avoid having to test it in callers, usually in error paths. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-mexbavy0ft387j5w89t365eu@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-21perf hists: Rename __hists__add_entry to hists__add_entryJiri Olsa1-2/+2
There's no reason we should suffer the '__' prefix for the base global function. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1465928361-2442-12-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-08Merge tag 'perf-core-for-mingo-20160606' of ↵Ingo Molnar1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: User visible changes: - Tooling support for TopDown counters, recently added to the kernel (Andi Kleen) - Show call graphs in 'perf script' when 1st event doesn't have it but some other has (He Kuang) - Fix terminal cleanup when handling invalid .perfconfig files in 'perf top' (Taeung Song) Build fixes: - Respect CROSS_COMPILE for the linker in libapi (Lucas Stach) Infrastructure changes: - Fix perf_evlist__alloc_mmap() failure path (Wang Nan) - Provide way to extract integer value from format_field (Arnaldo Carvalho de Melo) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-08Merge branch 'linus' into perf/core, to refresh the branchIngo Molnar1-1/+1
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-06perf test: Ignore .scale and other special filesAndi Kleen1-2/+2
'perf test' tries to parse all entries in /sys/devices/cpu/events/. Ignore the special entries like '.scale', which cannot be directly parsed as an event. This patch assumes all files containing a '.' are special and can be ignored. Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/1465223766-29902-1-git-send-email-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-30tools: Pass arg to fdarray__filter's call back functionWang Nan1-4/+4
Before this patch there's no way to pass arguments to fdarray__filter's call back function. This improvement will be used by 'perf record' to support unmapping ring buffer for both main evlist and overwrite evlist. Without this patch there's no way to track overwrite evlist from 'struct fdarray'. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1464183898-174512-10-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-17Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (21 commits) gitignore: fix wording mfd: ab8500-debugfs: fix "between" in printk memstick: trivial fix of spelling mistake on management cpupowerutils: bench: fix "average" treewide: Fix typos in printk IB/mlx4: printk fix pinctrl: sirf/atlas7: fix printk spelling serial: mctrl_gpio: Grammar s/lines GPIOs/line GPIOs/, /sets/set/ w1: comment spelling s/minmum/minimum/ Blackfin: comment spelling s/divsor/divisor/ metag: Fix misspellings in comments. ia64: Fix misspellings in comments. hexagon: Fix misspellings in comments. tools/perf: Fix misspellings in comments. cris: Fix misspellings in comments. c6x: Fix misspellings in comments. blackfin: Fix misspelling of 'register' in comment. avr32: Fix misspelling of 'definitions' in comment. treewide: Fix typos in printk Doc: treewide : Fix typos in DocBook/filesystem.xml ...
2016-05-09perf tests: Add test to check backward ring bufferWang Nan4-0/+157
This test checks reading from backward ring buffer. Test result: # ~/perf test 'ring buffer' 45: Test backward reading from ring buffer : Ok The test case is a while loop which calls prctl(PR_SET_NAME) multiple times. Each prctl should issue 2 events: one PERF_RECORD_SAMPLE, one PERF_RECORD_COMM. The first round creates a relative large ring buffer (256 pages). It can afford all events. Read from it and check the count of each type of events. The second round creates a small ring buffer (1 page) and makes it overwritable. Check the correctness of the buffer. Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1462758471-89706-3-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-05perf hists: Move sort__need_collapse into struct perf_hpp_listJiri Olsa4-5/+5
Now we have sort dimensions private for struct hists, we need to make dimension booleans hists specific as well. Moving sort__need_collapse into struct perf_hpp_list. Adding hists__has macro to easily access this info perf struct hists object. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1462276488-26683-2-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-28perf tests: Do not use sizeof on pointer typeVaishali Thakkar1-1/+1
Using sizeof on a malloced pointer type will return the wordsize which can often cause one to allocate a buffer much smaller than it is needed. So, here do not use sizeof on pointer type. Note that this has no effect on runtime because 'dsos' is a pointer to a pointer. Problem found using Coccinelle. Signed-off-by: Vaishali Thakkar <vaishali.thakkar@oracle.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1461862017-23358-1-git-send-email-vaishali.thakkar@oracle.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-27perf tools: Set the maximum allowed stack from ↵Arnaldo Carvalho de Melo3-3/+3
/proc/sys/kernel/perf_event_max_stack There is an upper limit to what tooling considers a valid callchain, and it was tied to the hardcoded value in the kernel, PERF_MAX_STACK_DEPTH (127), now that this can be tuned via a sysctl, make it read it and use that as the upper limit, falling back to PERF_MAX_STACK_DEPTH for kernels where this sysctl isn't present. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-yjqsd30nnkogvj5oyx9ghir9@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-25perf tests: Replace assignment with comparison on assert checkColin Ian King1-1/+1
The current assert check is checking an assignment, which will always be true. Instead, the assert should be checking if scale is equal to 0.122 Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1461419154-16918-1-git-send-email-colin.king@canonical.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-19perf test: Add missing verbose output explaining the reason for failureArnaldo Carvalho de Melo1-0/+3
One of the branches leading to an error had no debug message emitted, fix it, the new lines are: # perf test -v kallsyms <SNIP> 0xffffffff81001000: diff name v: xen_hypercall_set_trap_table k: hypercall_page 0xffffffff810691f0: diff name v: try_to_free_pud_page k: try_to_free_pmd_page <SNIP> 0xffffffff8150bb20: diff name v: wakeup_expire_count_show.part.5 k: wakeup_active_count_show.part.7 0xffffffff816bc7f0: diff name v: phys_switch_id_show.part.11 k: phys_port_name_show.part.12 0xffffffff817bbb90: diff name v: __do_softirq k: __softirqentry_text_start <SNIP> This in turn exercises another bug, still under investigation, because those aliases _are_ in kallsyms, with the same name... Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Fixes: ab414dcda8fa ("perf test: Fixup aliases checking in the 'vmlinux matches kallsyms' test") Link: http://lkml.kernel.org/n/tip-5fhea7a54a54gsmagu9obpr4@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-19perf test: Ignore kcore files in the "vmlinux matches kallsyms" testArnaldo Carvalho de Melo1-1/+7
Before: # perf test -v kallsyms <SNIP> Maps only in vmlinux: ffffffff81d5e000-ffffffff81ec3ac8 115e000 [kernel].init.text ffffffff81ec3ac8-ffffffffa0000000 12c3ac8 [kernel].exit.text ffffffffa0000000-ffffffffa000c000 0 [fjes] ffffffffa000c000-ffffffffa0017000 0 [video] ffffffffa0017000-ffffffffa001c000 0 [grace] <SNIP> ffffffffa0a7f000-ffffffffa0ba5000 0 [xfs] ffffffffa0ba5000-ffffffffffffffff 0 [veth] Maps in vmlinux with a different name in kallsyms: Maps only in kallsyms: ffff880000100000-ffff88001000b000 80000103000 [kernel.kallsyms] ffff88001000b000-ffff880100000000 8001000e000 [kernel.kallsyms] ffff880100000000-ffffc90000000000 80100003000 [kernel.kallsyms] <SNIP> ffffffffa0000000-ffffffffff600000 7fffa0003000 [kernel.kallsyms] ffffffffff600000-ffffffffffffffff 7fffff603000 [kernel.kallsyms] test child finished with -1 ---- end ---- vmlinux symtab matches kallsyms: FAILED! # After: # perf test -v 1 1: vmlinux symtab matches kallsyms : --- start --- test child forked, pid 7058 Looking at the vmlinux_path (8 entries long) Using /lib/modules/4.6.0-rc1+/build/vmlinux for symbols 0xffffffff81076870: diff end addr for aesni_gcm_dec v: 0xffffffff810791f2 k: 0xffffffff81076902 0xffffffff81079200: diff end addr for aesni_gcm_enc v: 0xffffffff8107bb03 k: 0xffffffff81079292 0xffffffff8107e8d0: diff end addr for aesni_gcm_enc_avx_gen2 v: 0xffffffff81083e76 k: 0xffffffff8107e943 0xffffffff81083e80: diff end addr for aesni_gcm_dec_avx_gen2 v: 0xffffffff81089611 k: 0xffffffff81083ef3 0xffffffff81089990: diff end addr for aesni_gcm_enc_avx_gen4 v: 0xffffffff8108e7c4 k: 0xffffffff81089a03 0xffffffff8108e7d0: diff end addr for aesni_gcm_dec_avx_gen4 v: 0xffffffff810937ef k: 0xffffffff8108e843 Maps only in vmlinux: ffffffff81d5e000-ffffffff81ec3ac8 115e000 [kernel].init.text ffffffff81ec3ac8-ffffffffa0000000 12c3ac8 [kernel].exit.text Maps in vmlinux with a different name in kallsyms: Maps only in kallsyms: test child finished with -1 ---- end ---- vmlinux symtab matches kallsyms: FAILED! # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Fixes: 8e0cf965f95e ("perf symbols: Add support for reading from /proc/kcore") Link: http://lkml.kernel.org/n/tip-n6vrwt9t89w8k769y349govx@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-18tools/perf: Fix misspellings in comments.Adam Buchbinder1-1/+1
Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-04-11perf evsel: Do not use globals in config()Arnaldo Carvalho de Melo6-6/+6
Instead receive a callchain_param pointer to configure callchain aspects, not doing so if NULL is passed. This will allow fine grained control over which evsels in an evlist gets callchains enabled. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-2mupip6khc92mh5x4nw9to82@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-30perf tests: Add test to check for event timesJiri Olsa4-0/+242
This test creates software event 'cpu-clock' attaches it in several ways and checks that enabled and running times match. Committer notes: Testing it: [acme@jouet linux]$ perf test -v times 44: Test events times : --- start --- test child forked, pid 27170 attaching to spawned child, enable on exec OK : ena 307328, run 307328 attaching to current thread as enabled OK : ena 7826, run 7826 attaching to current thread as disabled OK : ena 738, run 738 attaching to CPU 0 as enabled SKIP : not enough rights attaching to CPU 0 as enabled SKIP : not enough rights test child finished with -2 ---- end ---- Test events times: Skip [acme@jouet linux]$ [root@jouet ~]# perf test times 44: Test events times : Ok [root@jouet ~]# perf test -v times 44: Test events times : --- start --- test child forked, pid 27306 attaching to spawned child, enable on exec OK : ena 479290, run 479290 attaching to current thread as enabled OK : ena 11356, run 11356 attaching to current thread as disabled OK : ena 987, run 987 attaching to CPU 0 as enabled OK : ena 3717, run 3717 attaching to CPU 0 as enabled OK : ena 2323, run 2323 test child finished with 0 ---- end ---- Test events times: Ok [root@jouet ~]# Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1458823940-24583-7-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-24perf tests: Fix tarpkg build test error output redirectionArnaldo Carvalho de Melo1-1/+1
So we need to trow away just stdout, leaving stderr to be caught by the build tests infrastructure, so that we can see what went wrong when the tarpkg build test fails: $ make -C tools/perf build-test make: Entering directory '/home/acme/git/linux/tools/perf' - tarpkg: ./tests/perf-targz-src-pkg . tests/make:302: recipe for target 'tarpkg' failed make[1]: *** [tarpkg] Error 2 Makefile:102: recipe for target 'build-test' failed make: *** [build-test] Error 2 make: Leaving directory '/home/acme/git/linux/tools/perf' $ cat tools/perf/tarpkg ./tests/perf-targz-src-pkg . PERF_VERSION = 4.5.g05f5ec PERF_VERSION = 4.5.g05f5ec In file included from bench/mem-memcpy-x86-64-asm.S:9:0: bench/../../../arch/x86/lib/memcpy_64.S:5:29: fatal error: asm/cpufeatures.h: No such file or directory compilation terminated. mv: cannot stat ‘bench/.mem-memcpy-x86-64-asm.o.tmp’: No such file or directory make[5]: *** [bench/mem-memcpy-x86-64-asm.o] Error 1 make[5]: *** Waiting for unfinished jobs.... make[4]: *** [bench] Error 2 make[4]: *** Waiting for unfinished jobs.... make[3]: *** [perf-in.o] Error 2 make[3]: *** Waiting for unfinished jobs.... make[2]: *** [all] Error 2 $ So the test flow is: 1. Run: 'make -C tools/perf build-test' 2. One of its tests failed, in this case, the 'tarpkg' one 3. Look at what went wrong, by looking at the output of that test, in tools/perf/tarpkg Admittedly, this should be shortcircuited to showing what went wrong directly from the 'make build-test' step, but lets first fix this tarpkg one and the problem it spotted, which should be fixed by adding some extra file to the tools/perf/MANIFEST so that detached tarballs continue being self contained and build successfully. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-ynld6egoxolmftcddpnd7oh6@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-23perf machine: Rename perf_event__preprocess_sample to machine__resolveArnaldo Carvalho de Melo4-37/+6
Since we only deal with fields in the passed struct perf_sample move this method to struct machine, that is where the perf_sample fields will be resolved to a struct addr_location, i.e. thread, map, symbol, etc. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-a1ww2lbm2vbuqsv4p7ilubu9@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-23perf tools: Add cpumode to struct perf_sampleArnaldo Carvalho de Melo6-6/+9
To avoid parsing event->header.misc in many locations. This will also allow setting perf.sample.{ip,cpumode} in a single place, from tracepoint fields, as needed by 'perf kvm' with PPC guests, where the guest hardware counters is not available at the host. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-qp3yradhyt6q3wl895b1aat0@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-23perf tests: Forward the perf_sample in the dwarf unwind testArnaldo Carvalho de Melo1-2/+2
It _will_ be used, no sense in receiving it and nor fowarding it along. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-ht8v5et209wuoh5o6nh9pzyq@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-26perf config: Bring perf_default_config to the very beginning at main()Wang Nan1-8/+0
Before this patch each subcommand calls perf_config() by themself, reading the default configuration together with subcommand specific options. If a subcommand doesn't have it own options, it needs to call 'perf_config(perf_default_config, NULL)' to ensure .perfconfig is loaded. This patch brings perf_config(perf_default_config, NULL) to the very start of main(), so subcommands don't need to do it. After this patch, 'llvm.clang-path' works for 'perf trace'. Signed-off-by: Wang Nan <wangnan0@huawei.com> Suggested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1456479154-136027-4-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-22perf tools: Apply tracepoint event definition options to BPF scriptWang Nan1-1/+1
Users can pass options to tracepoints defined in the BPF script. For example: # perf record -e ./test.c/no-inherit/ bash # dd if=/dev/zero of=/dev/null count=10000 # exit [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.022 MB perf.data (139 samples) ] (no-inherit works, only the sys_read issued by bash are captured, at least 10000 sys_read issued by dd are skipped.) test.c: #define SEC(NAME) __attribute__((section(NAME), used)) SEC("func=sys_read") int bpf_func__sys_read(void *ctx) { return 1; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; no-inherit is applied to the kprobe event defined in test.c. Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Cody P Schafer <dev@codyps.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kirill Smelkov <kirr@nexedi.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1456132275-98875-10-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-19perf tools: Enable config and setting names for legacy cache eventsWang Nan1-0/+12
This patch allows setting config terms for legacy cache events. For example: # perf stat -e L1-icache-misses/name=valA/ -e branches/name=valB/ ls ... Performance counter stats for 'ls': 11299 valA 451605 valB 0.000779091 seconds time elapsed # perf record -e cache-misses/name=inh/ -e cache-misses/name=noinh,no-inherit/ bash # ls # exit [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.023 MB perf.data (131 samples) ] # perf report --stdio | grep -B 1 'Event count' # Samples: 105 of event 'inh' # Event count (approx.): 109118 -- # Samples: 26 of event 'noinh' # Event count (approx.): 48302 A test case is introduced to test this feature. Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Cody P Schafer <dev@codyps.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kirill Smelkov <kirr@nexedi.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1455882283-79592-14-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-19perf tools: Enable config raw and numeric eventsWang Nan1-0/+40
This patch allows setting config terms for raw and numeric events. For example: # perf stat -e cycles/name=cyc/ ls ... 1821108 cyc ... # perf stat -e r6530160/name=event/ ls ... 1103195 event ... # perf record -e cycles -e 4:0x6530160/name=evtx,call-graph=fp/ -a sleep 1 ... # perf report --stdio ... # Samples: 124 of event 'cycles' 46.61% 0.00% swapper [kernel.vmlinux] [k] cpu_startup_entry 41.26% 0.00% swapper [kernel.vmlinux] [k] start_secondary ... # Samples: 91 of event 'evtx' ... 93.76% 0.00% swapper [kernel.vmlinux] [k] cpu_startup_entry | ---cpu_startup_entry | |--66.63%--call_cpuidle | cpuidle_enter | | ... 3 test cases are introduced to test config terms for symbol, raw and numeric events. Committer note: Further testing shows that we can retrieve the event name using 'perf evlist -v' and looking at the 'config' perf_event_attr field, i.e.: # perf record -e cycles -e 4:0x6530160/name=evtx,call-graph=fp/ -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.724 MB perf.data (2076 samples) ] # perf evlist cycles evtx # perf evlist -v cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 evtx: type: 4, size: 112, config: 0x6530160, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, freq: 1, sample_id_all: 1, exclude_guest: 1 # Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Cody P Schafer <dev@codyps.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Kirill Smelkov <kirr@nexedi.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1455882283-79592-13-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 09:23:20 +0000