summaryrefslogtreecommitdiffstats
path: root/tools/perf/arch/s390
AgeCommit message (Collapse)AuthorFilesLines
2019-11-26perf map_symbol: Rename ms->mg to ms->mapsArnaldo Carvalho de Melo1-1/+1
One more step on the merge of 'struct maps' with 'struct map_groups'. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-61rra2wg392rhvdgw421wzpt@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-26perf maps: Merge 'struct maps' with 'struct map_groups'Arnaldo Carvalho de Melo1-1/+1
And pick the shortest name: 'struct maps'. The split existed because we used to have two groups of maps, one for functions and one for variables, but that only complicated things, sometimes we needed to figure out what was at some address and then had to first try it on the functions group and if that failed, fall back to the variables one. That split is long gone, so for quite a while we had only one struct maps per struct map_groups, simplify things by combining those structs. First patch is the minimum needed to merge both, follow up patches will rename 'thread->mg' to 'thread->maps', etc. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-hom6639ro7020o708trhxh59@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-12perf annotate: Stop using map->groups, use map_symbol->mg insteadArnaldo Carvalho de Melo1-1/+1
These were the last uses of map->groups, next cset will nuke it. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-n3g0foos7l7uxq9nar0zo0vj@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-12pref tools: Make 'struct addr_map_symbol' contain 'struct map_symbol'Arnaldo Carvalho de Melo1-3/+3
So that we pass that substructure around and with it consolidate lots of functions that receive a (map, symbol) pair and now can receive just a 'struct map_symbol' pointer. This further paves the way to add 'struct map_groups' to 'struct map_symbol' so that we can have all we need for annotation so that we can ditch 'struct map'->groups, i.e. have the map_groups pointer in a more central place, avoiding the pointer in the 'struct map' that have tons of instances. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-fs90ttd9q12l7989fo7pw81q@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-12perf map_groups: Pass the object to map_groups__find_ams()Arnaldo Carvalho de Melo1-1/+1
We were just passing a map to look for and reuse its map->groups member, but the idea is that this is going away, as a map can be in multiple rb_trees when being reused via a map_node, so do as all the other map_groups methods and pass as its first arg the object being operated on. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-nmi2pbggqloogwl6vxrvex5a@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-10-10perf tools: Avoid 'sample_reg_masks' being const + weakIan Rogers2-0/+7
Being const + weak breaks with some compilers that constant-propagate from the weak symbol. This behavior is outside of the specification, but in LLVM is chosen to match GCC's behavior. LLVM's implementation was set in this patch: https://github.com/llvm/llvm-project/commit/f49573d1eedcf1e44893d5a062ac1b72c8419646 A const + weak symbol is set to be weak_odr: https://llvm.org/docs/LangRef.html ODR is one definition rule, and given there is one constant definition constant-propagation is possible. It is possible to get this code to miscompile with LLVM when applying link time optimization. As compilers become more aggressive, this is likely to break in more instances. Move the definition of sample_reg_masks to the conditional part of perf_regs.h and guard usage with HAVE_PERF_REGS_SUPPORT. This avoids the weak symbol. Fix an issue when HAVE_PERF_REGS_SUPPORT isn't defined from patch v1. In v3, add perf_regs.c for architectures that HAVE_PERF_REGS_SUPPORT but don't declare sample_regs_masks. Further notes: Jiri asked: "Is this just a precaution or you actualy saw some breakage?" Ian answered: "We saw a breakage with clang with thinlto enabled for linking. Our compiler team had recently seen, and were surprised by, a similar issue and were able to dig out the weak ODR issue." Signed-off-by: Ian Rogers <irogers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: clang-built-linux@googlegroups.com Cc: Guo Ren <guoren@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: linux-riscv@lists.infradead.org Cc: Mao Han <han_mao@c-sky.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20191001003623.255186-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-30perf annotate: Fix arch specific ->init() failure errorsArnaldo Carvalho de Melo1-2/+4
They are called from symbol__annotate() and to propagate errors that can help understand the problem make them return what symbol__strerror_disassemble() known, i.e. errno codes and other annotation specific errors in a special, out of errnos, range. Reported-by: Russell King - ARM Linux admin <linux@armlinux.org.uk> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org>, Cc: Will Deacon <will@kernel.org> Link: https://lkml.kernel.org/n/tip-pqx7srcv7tixgid251aeboj6@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-30perf tools: Propagate get_cpuid() errorArnaldo Carvalho de Melo1-4/+5
For consistency, propagate the exact cause for get_cpuid() to have failed. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-9ig269f7ktnhh99g4l15vpu2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-25perf jvmti: Include JVMTI support for s390Thomas Richter1-0/+1
Enable JVMTI support for s390 perf tool chain. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Link: http://lore.kernel.org/lkml/20190909114116.50469-3-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-25libperf: Move 'page_size' global variable to libperfJiri Olsa1-1/+1
We need the 'page_size' variable in libperf, so move it there. Add a libperf_init() as a global libperf init function to obtain this value via sysconf() at tool start. Committer notes: Add internal/lib.h to tools/perf/ files using 'page_size', sometimes replacing util.h with it if that was the only reason for having util.h included. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lore.kernel.org/lkml/20190913132355.21634-33-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-25perf evlist: Adopt backwards ring buffer state enumArnaldo Carvalho de Melo1-0/+1
As this isn't used at all in mmap.h but in evlist.h, so to cut down the header dependency tree, move it to where it is used. Also add mmap.h to the places using it but previously getting it indirectly via evlist.h. Add missing pthread.h to evlist.h, as it has a pthread_t struct member and was getting the header via mmap.h. Noticed while processing a Jiri's libperf batch touching mmap.h, where almost everything gets rebuilt because evlist.h is so popular, so cut down't this rebuild the world party. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Link: https://lkml.kernel.org/n/tip-he0uljeftl0xfveh3d6vtode@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-20perf tools: Remove util.h from where it is not neededArnaldo Carvalho de Melo1-1/+1
Check that it is not needed and remove, fixing up some fallout for places where it was only serving to get something else. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-9h6dg6lsqe2usyqjh5rrues4@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-29libperf: Rename the PERF_RECORD_ structs to have a "perf" prefixJiri Olsa1-1/+1
Even more, to have a "perf_record_" prefix, so that they match the PERF_RECORD_ enum they map to. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190828135717.7245-23-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-26perf record: Move record_opts and other record decls out of perf.hArnaldo Carvalho de Melo1-0/+1
And into a separate util/record.h, to better isolate things and make sure that those who use record_opts and the other moved declarations are explicitly including the necessary header. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-31q8mei1qkh74qvkl9nwidfq@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-22perf kvm s390: Add missing string.h headerArnaldo Carvalho de Melo1-0/+1
It uses strstr(), needs to include string.h or its not going to build when we remove string.h from the place it is getting from indirectly, by luck. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-72y0i0uiaqght5b83e3ae7p4@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-12Merge remote-tracking branch 'torvalds/master' into perf/coreArnaldo Carvalho de Melo1-1/+30
To get closer to upstream and check if we need to sync more UAPI headers, pick up fixes for libbpf that prevent perf's container tests from completing successfuly, etc. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-08perf annotate: Fix s390 gap between kernel end and module startThomas Richter1-0/+17
During execution of command 'perf top' the error message: Not enough memory for annotating '__irf_end' symbol!) is emitted from this call sequence: __cmd_top perf_top__mmap_read perf_top__mmap_read_idx perf_event__process_sample hist_entry_iter__add hist_iter__top_callback perf_top__record_precise_ip hist_entry__inc_addr_samples symbol__inc_addr_samples symbol__get_annotation symbol__alloc_hist In this function the size of symbol __irf_end is calculated. The size of a symbol is the difference between its start and end address. When the symbol was read the first time, its start and end was set to: symbol__new: __irf_end 0xe954d0-0xe954d0 which is correct and maps with /proc/kallsyms: root@s8360046:~/linux-4.15.0/tools/perf# fgrep _irf_end /proc/kallsyms 0000000000e954d0 t __irf_end root@s8360046:~/linux-4.15.0/tools/perf# In function symbol__alloc_hist() the end of symbol __irf_end is symbol__alloc_hist sym:__irf_end start:0xe954d0 end:0x3ff80045a8 which is identical with the first module entry in /proc/kallsyms This results in a symbol size of __irf_req for histogram analyses of 70334140059072 bytes and a malloc() for this requested size fails. The root cause of this is function __dso__load_kallsyms() +-> symbols__fixup_end() Function symbols__fixup_end() enlarges the last symbol in the kallsyms map: # fgrep __irf_end /proc/kallsyms 0000000000e954d0 t __irf_end # to the start address of the first module: # cat /proc/kallsyms | sort | egrep ' [tT] ' .... 0000000000e952d0 T __security_initcall_end 0000000000e954d0 T __initramfs_size 0000000000e954d0 t __irf_end 000003ff800045a8 T fc_get_event_number [scsi_transport_fc] 000003ff800045d0 t store_fc_vport_disable [scsi_transport_fc] 000003ff800046a8 T scsi_is_fc_rport [scsi_transport_fc] 000003ff800046d0 t fc_target_setup [scsi_transport_fc] On s390 the kernel is located around memory address 0x200, 0x10000 or 0x100000, depending on linux version. Modules however start some- where around 0x3ff xxxx xxxx. This is different than x86 and produces a large gap for which histogram allocation fails. Fix this by detecting the kernel's last symbol and do no adjustment for it. Introduce a weak function and handle s390 specifics. Reported-by: Klaus Theurich <klaus.theurich@de.ibm.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20190724122703.3996-2-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-08perf record: Fix module size on s390Thomas Richter1-1/+13
On s390 the modules loaded in memory have the text segment located after the GOT and Relocation table. This can be seen with this output: [root@m35lp76 perf]# fgrep qeth /proc/modules qeth 151552 1 qeth_l2, Live 0x000003ff800b2000 ... [root@m35lp76 perf]# cat /sys/module/qeth/sections/.text 0x000003ff800b3990 [root@m35lp76 perf]# There is an offset of 0x1990 bytes. The size of the qeth module is 151552 bytes (0x25000 in hex). The location of the GOT/relocation table at the beginning of a module is unique to s390. commit 203d8a4aa6ed ("perf s390: Fix 'start' address of module's map") adjusts the start address of a module in the map structures, but does not adjust the size of the modules. This leads to overlapping of module maps as this example shows: [root@m35lp76 perf] # ./perf report -D 0 0 0xfb0 [0xa0]: PERF_RECORD_MMAP -1/0: [0x3ff800b3990(0x25000) @ 0]: x /lib/modules/.../qeth.ko.xz 0 0 0x1050 [0xb0]: PERF_RECORD_MMAP -1/0: [0x3ff800d85a0(0x8000) @ 0]: x /lib/modules/.../ip6_tables.ko.xz The module qeth.ko has an adjusted start address modified to b3990, but its size is unchanged and the module ends at 0x3ff800d8990. This end address overlaps with the next modules start address of 0x3ff800d85a0. When the size of the leading GOT/Relocation table stored in the beginning of the text segment (0x1990 bytes) is subtracted from module qeth end address, there are no overlaps anymore: 0x3ff800d8990 - 0x1990 = 0x0x3ff800d7000 which is the same as 0x3ff800b2000 + 0x25000 = 0x0x3ff800d7000. To fix this issue, also adjust the modules size in function arch__fix_module_text_start(). Add another function parameter named size and reduce the size of the module when the text segment start address is changed. Output after: 0 0 0xfb0 [0xa0]: PERF_RECORD_MMAP -1/0: [0x3ff800b3990(0x23670) @ 0]: x /lib/modules/.../qeth.ko.xz 0 0 0x1050 [0xb0]: PERF_RECORD_MMAP -1/0: [0x3ff800d85a0(0x7a60) @ 0]: x /lib/modules/.../ip6_tables.ko.xz Reported-by: Stefan Liebler <stli@linux.ibm.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: stable@vger.kernel.org Fixes: 203d8a4aa6ed ("perf s390: Fix 'start' address of module's map") Link: http://lkml.kernel.org/r/20190724122703.3996-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29libperf: Move perf_event_attr field from perf's evsel to libperf's perf_evselJiri Olsa1-1/+1
Move the perf_event_attr struct fron 'struct evsel' to 'struct perf_evsel'. Committer notes: Fixed up these: tools/perf/arch/arm/util/auxtrace.c tools/perf/arch/arm/util/cs-etm.c tools/perf/arch/arm64/util/arm-spe.c tools/perf/arch/s390/util/auxtrace.c tools/perf/util/cs-etm.c Also cc1: warnings being treated as errors tests/sample-parsing.c: In function 'do_test': tests/sample-parsing.c:162: error: missing initializer tests/sample-parsing.c:162: error: (near initialization for 'evsel.core.cpus') struct evsel evsel = { .needs_swap = false, - .core.attr = { - .sample_type = sample_type, - .read_format = read_format, + .core = { + . attr = { + .sample_type = sample_type, + .read_format = read_format, + }, [perfbuilder@a70e4eeb5549 /]$ gcc --version |& head -1 gcc (GCC) 4.4.7 Also we don't need to include perf_event.h in tools/perf/lib/include/perf/evsel.h, forward declaring 'struct perf_event_attr' is enough. And this even fixes the build in some systems where things are used somewhere down the include path from perf_event.h without defining __always_inline. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-43-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29libperf: Add nr_entries to struct perf_evlistJiri Olsa1-1/+1
Move nr_entries count from 'struct perf' to into perf_evlist struct. Committer notes: Fix tools/perf/arch/s390/util/auxtrace.c case. And also the comment in tools/perf/util/annotate.h. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-42-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29perf evlist: Rename struct perf_evlist to struct evlistJiri Olsa1-3/+3
Rename struct perf_evlist to struct evlist, so we don't have a name clash when we add struct perf_evlist in libperf. Committer notes: Added fixes to build on arm64, from Jiri and from me (tools/perf/util/cs-etm.c) Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-6-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29perf evsel: Rename struct perf_evsel to struct evselJiri Olsa2-5/+5
Rename struct perf_evsel to struct evsel, so we don't have a name clash when we add struct perf_evsel in libperf. Committer notes: Added fixes for arm64, provided by Jiri. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-5-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-09tools lib: Adopt zalloc()/zfree() from tools/perfArnaldo Carvalho de Melo2-1/+2
Eroding a bit more the tools/perf/util/util.h hodpodge header. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-natazosyn9rwjka25tvcnyi0@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-09perf tools: Add missing headers, mostly stdlib.hArnaldo Carvalho de Melo1-0/+1
Part of the erosion of util/util.h, that will lose its include stdlib.h, we need to add it to places where it is needed but was getting it indirectly. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-1imnqezw99ahc07fjeb51qby@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-06-25perf tools: Use linux/ctype.h in more placesArnaldo Carvalho de Melo1-1/+1
There were a few places where we still were using the libc version of ctype.h, switch to the one in tools/lib/ctype.c that the rest of perf uses. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-wa4nz4kt61eze88eprk20tfd@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 376Thomas Gleixner2-8/+2
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 only as published by the free software foundation extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531081036.798138318@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-02Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds1-3/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "On the kernel side there's a bunch of ring-buffer ordering fixes for a reproducible bug, plus a PEBS constraints regression fix. Plus tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tools headers UAPI: Sync kvm.h headers with the kernel sources perf record: Fix s390 missing module symbol and warning for non-root users perf machine: Read also the end of the kernel perf test vmlinux-kallsyms: Ignore aliases to _etext when searching on kallsyms perf session: Add missing swap ops for namespace events perf namespace: Protect reading thread's namespace tools headers UAPI: Sync drm/drm.h with the kernel tools headers UAPI: Sync drm/i915_drm.h with the kernel tools headers UAPI: Sync linux/fs.h with the kernel tools headers UAPI: Sync linux/sched.h with the kernel tools arch x86: Sync asm/cpufeatures.h with the with the kernel tools include UAPI: Update copy of files related to new fspick, fsmount, fsconfig, fsopen, move_mount and open_tree syscalls perf arm64: Fix mksyscalltbl when system kernel headers are ahead of the kernel perf data: Fix 'strncat may truncate' build failure with recent gcc perf/ring-buffer: Use regular variables for nesting perf/ring-buffer: Always use {READ,WRITE}_ONCE() for rb->user_page data perf/ring_buffer: Add ordering to rb->nest increment perf/ring_buffer: Fix exposing a temporarily decreased data_head perf/x86/intel/ds: Fix EVENT vs. UEVENT PEBS constraints
2019-05-28perf record: Fix s390 missing module symbol and warning for non-root usersThomas Richter1-3/+6
Command 'perf record' and 'perf report' on a system without kernel debuginfo packages uses /proc/kallsyms and /proc/modules to find addresses for kernel and module symbols. On x86 this works for root and non-root users. On s390, when invoked as non-root user, many of the following warnings are shown and module symbols are missing: proc/{kallsyms,modules} inconsistency while looking for "[sha1_s390]" module! Command 'perf record' creates a list of module start addresses by parsing the output of /proc/modules and creates a PERF_RECORD_MMAP record for the kernel and each module. The following function call sequence is executed: machine__create_kernel_maps machine__create_module modules__parse machine__create_module --> for each line in /proc/modules arch__fix_module_text_start Function arch__fix_module_text_start() is s390 specific. It opens file /sys/module/<name>/sections/.text to extract the module's .text section start address. On s390 the module loader prepends a header before the first section, whereas on x86 the module's text section address is identical the the module's load address. However module section files are root readable only. For non-root the read operation fails and machine__create_module() returns an error. Command perf record does not generate any PERF_RECORD_MMAP record for loaded modules. Later command perf report complains about missing module maps. To fix this function arch__fix_module_text_start() always returns success. For root users there is no change, for non-root users the module's load address is used as module's text start address (the prepended header then counts as part of the text section). This enable non-root users to use module symbols and avoid the warning when perf report is executed. Output before: [tmricht@m83lp54 perf]$ ./perf report -D | fgrep MMAP 0 0x168 [0x50]: PERF_RECORD_MMAP ... x [kernel.kallsyms]_text Output after: [tmricht@m83lp54 perf]$ ./perf report -D | fgrep MMAP 0 0x168 [0x50]: PERF_RECORD_MMAP ... x [kernel.kallsyms]_text 0 0x1b8 [0x98]: PERF_RECORD_MMAP ... x /lib/modules/.../autofs4.ko.xz 0 0x250 [0xa8]: PERF_RECORD_MMAP ... x /lib/modules/.../sha_common.ko.xz 0 0x2f8 [0x98]: PERF_RECORD_MMAP ... x /lib/modules/.../des_generic.ko.xz Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Link: http://lkml.kernel.org/r/20190522144601.50763-4-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-06perf annotate: Calculate the max instruction name, align column to thatArnaldo Carvalho de Melo1-1/+1
We were hardcoding '6' as the max instruction name, and we have lots that are longer than that, see the diff from two 'P' printed TUI annotations for a libc function that uses instructions with long names, such as 'vpmovmskb' with its 9 chars: --- __strcmp_avx2.annotation.before 2019-03-06 16:31:39.368020425 -0300 +++ __strcmp_avx2.annotation 2019-03-06 16:32:12.079450508 -0300 @@ -2,284 +2,284 @@ Event: cycles:ppp Percent endbr64 - 0.10 mov %edi,%eax + 0.10 mov %edi,%eax - xor %edx,%edx + xor %edx,%edx - 3.54 vpxor %ymm7,%ymm7,%ymm7 + 3.54 vpxor %ymm7,%ymm7,%ymm7 - or %esi,%eax + or %esi,%eax - and $0xfff,%eax + and $0xfff,%eax - cmp $0xf80,%eax + cmp $0xf80,%eax - ↓ jg 370 + ↓ jg 370 - 27.07 vmovdqu (%rdi),%ymm1 + 27.07 vmovdqu (%rdi),%ymm1 - 7.97 vpcmpeqb (%rsi),%ymm1,%ymm0 + 7.97 vpcmpeqb (%rsi),%ymm1,%ymm0 - 2.15 vpminub %ymm1,%ymm0,%ymm0 + 2.15 vpminub %ymm1,%ymm0,%ymm0 - 4.09 vpcmpeqb %ymm7,%ymm0,%ymm0 + 4.09 vpcmpeqb %ymm7,%ymm0,%ymm0 - 0.43 vpmovmskb %ymm0,%ecx + 0.43 vpmovmskb %ymm0,%ecx - 1.53 test %ecx,%ecx + 1.53 test %ecx,%ecx - ↓ je b0 + ↓ je b0 - 5.26 tzcnt %ecx,%edx + 5.26 tzcnt %ecx,%edx - 18.40 movzbl (%rdi,%rdx,1),%eax + 18.40 movzbl (%rdi,%rdx,1),%eax - 7.09 movzbl (%rsi,%rdx,1),%edx + 7.09 movzbl (%rsi,%rdx,1),%edx - 3.34 sub %edx,%eax + 3.34 sub %edx,%eax 2.37 vzeroupper ← retq nop - 50: tzcnt %ecx,%edx + 50: tzcnt %ecx,%edx - movzbl 0x20(%rdi,%rdx,1),%eax + movzbl 0x20(%rdi,%rdx,1),%eax - movzbl 0x20(%rsi,%rdx,1),%edx + movzbl 0x20(%rsi,%rdx,1),%edx - sub %edx,%eax + sub %edx,%eax vzeroupper ← retq - data16 nopw %cs:0x0(%rax,%rax,1) + data16 nopw %cs:0x0(%rax,%rax,1) Reported-by: Travis Downs <travis.downs@gmail.com> LPU-Reference: CAOBGo4z1KfmWeOm6Et0cnX5Z6DWsG2PQbAvRn1MhVPJmXHrc5g@mail.gmail.com Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-89wsdd9h9g6bvq52sgp6d0u4@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-02-14perf tools: Rename build libperf to perfJiri Olsa2-7/+7
Rename build libperf to perf, because it's used to build perf. The libperf build object name will be used for libperf library. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190213123246.4015-4-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-02-06perf kvm stat: Replace kvm-stat.h includes with forward declarationsArnaldo Carvalho de Melo1-0/+1
To reduce the include header dependency tree and speed up perf builds. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-dngwaxuhfnhksawgdpo6e74n@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-30perf annotate: Handle arm64 move instructionsKim Phillips1-2/+0
Add default handler for non-jump instructions. This really only has an effect on instructions that compute a PC-relative address, such as 'adrp,' as seen in these couple of examples: BEFORE: adrp x0, ffff20000aa11000 <kallsyms_token_index+0xce000> AFTER: adrp x0, kallsyms_token_index+0xce000 BEFORE: adrp x23, ffff20000ae94000 <__per_cpu_load> AFTER: adrp x23, __per_cpu_load The implementation is identical to that of s390, but with a slight adjustment for objdump whitespace propagation (arm64 objdump puts spaces after commas, whereas s390's presumably doesn't). The mov__scnprintf() declaration is moved from s390's to arm64's instructions.c because arm64's gets included before s390's. Committer testing: Ran 'perf annotate --stdio2 > /tmp/{before,after}' no diff. Signed-off-by: Kim Phillips <kim.phillips@arm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/20180827150807.304110d2e9919a17c832ca48@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-03perf auxtrace: Support for perf report -D for s390Thomas Richter1-0/+1
Add initial support for s390 auxiliary traces using the CPU-Measurement Sampling Facility. Support and ignore PERF_REPORT_AUXTRACE_INFO records in the perf data file. Later patches will show the contents of the auxiliary traces. Setup the auxtrace queues and data structures for s390. A raw dump of the perf.data file now does not show an error when an auxtrace event is encountered. Output before: [root@s35lp76 perf]# ./perf report -D -i perf.data.auxtrace 0x128 [0x10]: failed to process type: 70 Error: failed to process sample 0x128 [0x10]: event: 70 . . ... raw event: size 16 bytes . 0000: 00 00 00 46 00 00 00 10 00 00 00 00 00 00 00 00 ...F............ 0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 0 [root@s35lp76 perf]# Output after: # ./perf report -D -i perf.data.auxtrace |fgrep PERF_RECORD_AUXTRACE 0 0 0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 5 0 0 0x25a66 [0x30]: PERF_RECORD_AUXTRACE size: 0x40000 offset: 0 ref: 0 idx: 4 tid: -1 cpu: 4 .... Additional notes about the underlying hardware and software implementation, provided by Hendrik Brueckner (see Link: below). ============================================================================= The CPU-Measurement Facility (CPU-MF) provides a set of functions to obtain performance information on the mainframe. Basically, it was introduced with System z10 years ago for the z/Architecture, that means, 64-bit. For Linux, there are two facilities of interest, counter facility and sampling facility. The counter facility provides hardware counters for instructions, cycles, crypto-activities, and many more. The sampling facility is a hardware sampler that when started will write samples at a particular interval into a sampling buffer. At some point, for example, if a sample block is full, it generates an interrupt to collect samples (while the sampler continues to run). Few years ago, I started to provide the a perf PMU to use the counter and sampling facilities. Recently, the device driver was updated to also "export" the sampling buffer into the AUX area. Thomas now completed the related perf work to interpret and process these AUX data. If people are more interested in the sampling facility, they can have a look into: - The Load-Program-Parameter and the CPU-Measurement Facilities, SA23-2260-05 http://www-01.ibm.com/support/docview.wss?uid=isg26fcd1cc32246f4c8852574ce0044734a and to learn how-to use it for Linux on Z, have look at chapter 54, "Using the CPU-measurement facilities" in the: - Device Drivers, Features, and Commands, SC33-8411-34 http://public.dhe.ibm.com/software/dw/linux390/docu/l416dd34.pdf ============================================================================= Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Link: http://lkml.kernel.org/r/20180803100758.GA28475@linux.ibm.com Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180802074622.13641-2-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-07-24perf kvm: Fix subcommands on s390Thomas Richter1-1/+1
With commit eca0fa28cd0d ("perf record: Provide detailed information on s390 CPU") s390 platform provides detailed type/model/capacity information in the CPU identifier string instead of just "IBM/S390". This breaks 'perf kvm' support which uses hard coded string IBM/S390 to compare with the CPU identifier string. Fix this by changing the comparison. Reported-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Tested-by: Stefan Raspl <raspl@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: stable@vger.kernel.org Fixes: eca0fa28cd0d ("perf record: Provide detailed information on s390 CPU") Link: http://lkml.kernel.org/r/20180712070936.67547-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-23perf record: Fix s390 undefined record__auxtrace_init() return valueThomas Richter1-0/+1
Command 'perf record' calls: cmd_report() record__auxtrace_init() auxtrace_record__init() On s390 function auxtrace_record__init() returns random return value due to missing initialization. This sometime causes 'perf record' to exit immediately without error message and creating a perf.data file. Fix this by setting error the return code to zero before returning from platform specific functions which may not set the error code in call cases. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180423142940.21143-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-23perf list: Remove s390 specific strcmp_cpuid_cmp functionThomas Richter1-18/+0
Make the type field in pmu-events/arch/s390/mapfile.cvs more generic to match the created cpuid string for s390. The pattern also checks for the counter first version number and counter second version number ([13]\.[1-5]) and the authorization field which follows. These numbers do not exist in the cpuid identification string when perf commands are executed on a z/VM environment (which does not support CPU counter measurement facility). CPUID string for LPAR: cpuid : IBM,3906,704,M03,3.5,002f CPUID string for z/VM: cpuid : IBM,2964,702,N96 This allows the removal of s390 specific cpuid compare code and uses the common compare function with its regular expression matching algorithm. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180423081745.3672-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-21perf annotate: Pass function descriptor to its instruction parsing routinesArnaldo Carvalho de Melo1-2/+3
We need that to figure out if jumps have targets in a different function. E.g. _cpp_lex_token(), in /usr/libexec/gcc/x86_64-redhat-linux/5.3.1/cc1 has a line like this: jne c469be <cpp_named_operator2name@@Base+0xa72> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-ris0ioziyp469pofpzix2atb@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-08perf annotate: Handle s390 PC relative load and store instruction.Thomas Richter1-0/+63
S390 has several load and store instructions with target operand addressing relative to the program counter, for example lrl, lgrl, strl, stgrl. These instructions are handled similar to x86. Objdump output displays those instructions as: 9595c: c4 2d 00 09 9c 54 lgrl %r7,1c8540 <mp_+0x60> This output is parsed (like on x86) and perf annotate shows those lines as: lgrl %r7,mp_+0x60 This patch handles the s390 specific instruction parsing for PC relative load and store instructions. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180308120913.14802-1-tmricht@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-08perf annotate: Fix s390 target function disassemblyThomas Richter1-1/+52
'perf annotate' displays function call assembler instructions with a right arrow. Hitting enter on this line/instruction causes the browser to disassemble this target function and show it on the screen. On s390 this results in an error message 'The called function was not found.' The function call assembly line parsing does not handle the s390 bras and brasl instructions. Function call__parse expects the target as first operand: callq e9140 <__fxstat> S390 has a register number as first operand: brasl %r14,41d60 <abort> Therefore the target addresses on s390 are always zero which is an invalid address. Introduce a s390 specific call parsing function which skips the first operand on s390. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180307134325.96106-1-tmricht@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-02-19perf s390: Fix reading cpuid model informationThomas Richter1-1/+1
Commit eca0fa28cd0d (perf record: Provide detailed information on s390 CPU") fixed a build error on Ubuntu. However the fix uses the wrong size to print the model information. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Fixes: eca0fa28cd0d ("perf record: Provide detailed information on s390 CPU") Link: http://lkml.kernel.org/r/20180219102444.96900-1-tmricht@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-02-16perf cpuid: Introduce a platform specific cpuid compare functionThomas Richter1-0/+18
The function get_cpuid_str() is called by perf_pmu__getcpuid() and on s390 returns a complete description of the CPU and its capabilities, which is a comma separated list. To map the CPU type with the value defined in the pmu-events/arch/s390/mapfile.csv, introduce an architecture specific cpuid compare function named strcmp_cpuid_str() The currently used regex algorithm is defined as the weak default and will be used if no platform specific one is defined. This matches the current behavior. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180213151419.80737-3-tmricht@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-02-16perf annotate: Scan cpuid for s390 and save machine typeThomas Richter1-1/+26
Scan the cpuid string and extract the type number for later use. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180213151419.80737-2-tmricht@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-02-16perf record: Provide detailed information on s390 CPUThomas Richter1-5/+125
When perf record ... is setup to record data, the s390 cpu information was a fixed string "IBM/S390". Replace this string with one containing more information about the machine. The information included in the cpuid is a comma separated list: manufacturer,type,model-capacity,model[,version,authorization] with - manufacturer: up to 16 byte name of the manufacturer (IBM). - type: a four digit number refering to the machine generation. - model-capacitiy: up to 16 characters describing number of cpus etc. - model: up to 16 characters describing model. - version: the CPU-MF counter facility version number, available on LPARs only, omitted on z/VM guests. - authorization: the CPU-MF counter facility authorization level, available on LPARs only, omitted on z/VM guests. Before: [root@s8360047 perf]# ./perf record -- sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.001 MB perf.data (4 samples) ] [root@s8360047 perf]# ./perf report --header | fgrep cpuid # cpuid : IBM/S390 [root@s8360047 perf]# After: [root@s35lp76 perf]# ./perf report --header|fgrep cpuid # cpuid : IBM,3906,704,M03,3.5,002f [root@s35lp76 perf]# Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180213151419.80737-1-tmricht@linux.vnet.ibm.com [ Use scnprintf instead of strncat to fix build errors on gcc GNU C99 5.4.0 20160609 -march=zEC12 -m64 -mzarch -ggdb3 -O6 -std=gnu99 -fPIC -fno-omit-frame-pointer -funwind-tables -fstack-protector-all ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-02-15perf s390: Rework system call table creation by using syscall.tblHendrik Brueckner2-14/+14
Recently, s390 uses a syscall.tbl input file to generate its system call table and unistd uapi header files. Hence, update mksyscalltbl to use it as input to create the system table for perf. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: linux-s390@vger.kernel.org LPU-Reference: 1518090470-2899-4-git-send-email-brueckner@linux.vnet.ibm.com Link: https://lkml.kernel.org/n/tip-bdyhllhsq1zgxv2qx4m377y6@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-02-15perf s390: Grab a copy of arch/s390/kernel/syscall/syscall.tblHendrik Brueckner1-0/+390
Grab a copy of the s390 system call table file introduced with commit 857f46bfb07f53dc112d69bdfb137cc5ec3da7c5 "s390/syscalls: add system call table". Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: linux-s390@vger.kernel.org LPU-Reference: 1518090470-2899-3-git-send-email-brueckner@linux.vnet.ibm.com Link: https://lkml.kernel.org/n/tip-hpw7vdjp7g92ivgpddrp5ydq@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-12-27perf s390: Generate system call table from asm/unistd.hHendrik Brueckner2-0/+57
This should speed up accessing new system calls introduced with the kernel rather than waiting for libaudit updates to include them. Committer testing: $ rm -rf /tmp/build/perf $ mkdir /tmp/build/perf $ make srctree=/home/acme/git/perf -C tools/perf/arch/s390 OUTPUT=/tmp/build/perf/ archheaders make: Entering directory '/home/acme/git/perf/tools/perf/arch/s390' /bin/sh '/home/acme/git/perf/tools/perf/arch/s390/entry/syscalls//mksyscalltbl' 'cc' /home/acme/git/perf/tools/arch/s390/include/uapi/asm/unistd.h > /tmp/build/perf/arch/s390/include/generated/asm/syscalls_64.c make: Leaving directory '/home/acme/git/perf/tools/perf/arch/s390' $ head -5 /tmp/build/perf/arch/s390/include/generated/asm/syscalls_64.c static const char *syscalltbl_s390_64[] = { [1] = "exit", [2] = "fork", [3] = "read", [4] = "write", $ tail -5 /tmp/build/perf/arch/s390/include/generated/asm/syscalls_64.c [378] = "s390_guarded_storage", [379] = "statx", [380] = "s390_sthyi", }; #define SYSCALLTBL_S390_64_MAX_ID 380 $ Now to plug this into 'perf trace' proper. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: linux-s390@vger.kernel.org LPU-Reference: 1512635281-20733-2-git-send-email-brueckner@linux.vnet.ibm.com Link: https://lkml.kernel.org/n/tip-h5km60rdg3rqxvsys85q50l3@git.kernel.org [ split from a larger patch ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-12-18Merge branch 'perf/urgent' into perf/core, to pick up fixesIngo Molnar1-1/+1
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-18tools arch s390: Do not include header files from the kernel sourcesArnaldo Carvalho de Melo1-1/+1
Long ago we decided to be verbotten including files in the kernel git sources from tools/ living source code, to avoid disturbing kernel development (and perf's and other tools/) when, say, a kernel hacker adds something, tests everything but tools/ and have tools/ build broken. This got broken recently by s/390, fix it by copying arch/s390/include/uapi/asm/perf_regs.h to tools/arch/s390/include/uapi/asm/, making this one be used by means of <asm/perf_regs.h> and updating tools/perf/check_headers.sh to make sure we are notified when the original changes, so that we can check if anything is needed on the tooling side. This would have been caught by the 'tarkpg' test entry in: $ make -C tools/perf build-test When run on a s/390 build system or container. Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Fixes: f704ef44602f ("s390/perf: add support for perf_regs and libdw") Link: https://lkml.kernel.org/n/tip-n57139ic0v9uffx8wdqi3d8a@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-12-12Merge tag 'v4.15-rc3' into perf/core, to refresh the treeIngo Molnar2-3/+30
Signed-off-by: Ingo Molnar <mingo@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-26 01:47:47 +0000