Age | Commit message (Collapse) | Author | Files | Lines |
|
Set up the default number of mmap pages, default sample size and default
psb_period for AUX area sampling. Add documentation also.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-14-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To allow individual events to be selected for AUX area sampling, add
aux-sample-size config term. attr.aux_sample_size is updated by
auxtrace_parse_sample_options() so that the existing validation will see
the value. Any event that has a non-zero aux_sample_size will cause AUX
area sampling to be configured, irrespective of the --aux-sample option.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-8-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a 'perf record' option '--aux-sample' to request AUX area sampling.
AUX area sampling uses an overwriting buffer much like snapshot mode, so
adjust the AUX buffer mmapping accordingly. To make it easy to queue
samples for decoding, synthesize an ID index.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Perf record with verbose=2 already prints this information along with
whole lot of other traces which requires lot of scrolling. Introduce
an option to print only perf_event_open() arguments and return value.
Sample o/p:
$ perf --debug perf-event-open=1 record -- ls > /dev/null
------------------------------------------------------------
perf_event_attr:
size 112
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|PERIOD
read_format ID
disabled 1
inherit 1
exclude_kernel 1
mmap 1
comm 1
freq 1
enable_on_exec 1
task 1
precise_ip 3
sample_id_all 1
exclude_guest 1
mmap2 1
comm_exec 1
ksymbol 1
bpf_event 1
------------------------------------------------------------
sys_perf_event_open: pid 4308 cpu 0 group_fd -1 flags 0x8 = 4
sys_perf_event_open: pid 4308 cpu 1 group_fd -1 flags 0x8 = 5
sys_perf_event_open: pid 4308 cpu 2 group_fd -1 flags 0x8 = 6
sys_perf_event_open: pid 4308 cpu 3 group_fd -1 flags 0x8 = 8
sys_perf_event_open: pid 4308 cpu 4 group_fd -1 flags 0x8 = 9
sys_perf_event_open: pid 4308 cpu 5 group_fd -1 flags 0x8 = 10
sys_perf_event_open: pid 4308 cpu 6 group_fd -1 flags 0x8 = 11
sys_perf_event_open: pid 4308 cpu 7 group_fd -1 flags 0x8 = 12
------------------------------------------------------------
perf_event_attr:
type 1
size 112
config 0x9
watermark 1
sample_id_all 1
bpf_event 1
{ wakeup_events, wakeup_watermark } 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8
sys_perf_event_open failed, error -13
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.002 MB perf.data (9 samples) ]
Committer notes:
Just like the 'verbose' variable this new 'debug_peo_args' needs to be
added to util/python.c, since we don't link the debug.o file in the
python binding, which ended up making 'perf test python' fail with:
# perf test -v python
18: 'import perf' in python :
--- start ---
test child forked, pid 19237
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: /tmp/build/perf/python/perf.so: undefined symbol: debug_peo_args
test child finished with -1
---- end ----
'import perf' in python: FAILED!
#
After adding that new variable to util/python.c:
# perf test -v python
18: 'import perf' in python :
--- start ---
test child forked, pid 22364
test child finished with 0
---- end ----
'import perf' in python: Ok
#
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20191108094128.28769-1-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It would be useful to support sorting for all blocks by the sampled
cycles percent per block. This is useful to concentrate on the globally
hottest blocks.
This patch implements a new option "--total-cycles" which sorts all
blocks by 'Sampled Cycles%'. The 'Sampled Cycles%' is the percent:
percent = block sampled cycles aggregation / total sampled cycles
Note that, this patch only supports "--stdio" mode.
For example,
# perf record -b ./div
# perf report --total-cycles --stdio
# To display the perf.data header info, please use --header/--header-only options.
#
# Total Lost Samples: 0
#
# Samples: 2M of event 'cycles'
# Event count (approx.): 2753248
#
# Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles [Program Block Range] Shared Object
# ............... .............. ........... .......... ................................................ .................
#
26.04% 2.8M 0.40% 18 [div.c:42 -> div.c:39] div
15.17% 1.2M 0.16% 7 [random_r.c:357 -> random_r.c:380] libc-2.27.so
5.11% 402.0K 0.04% 2 [div.c:27 -> div.c:28] div
4.87% 381.6K 0.04% 2 [random.c:288 -> random.c:291] libc-2.27.so
4.53% 381.0K 0.04% 2 [div.c:40 -> div.c:40] div
3.85% 300.9K 0.02% 1 [div.c:22 -> div.c:25] div
3.08% 241.1K 0.02% 1 [rand.c:26 -> rand.c:27] libc-2.27.so
3.06% 240.0K 0.02% 1 [random.c:291 -> random.c:291] libc-2.27.so
2.78% 215.7K 0.02% 1 [random.c:298 -> random.c:298] libc-2.27.so
2.52% 198.3K 0.02% 1 [random.c:293 -> random.c:293] libc-2.27.so
2.36% 184.8K 0.02% 1 [rand.c:28 -> rand.c:28] libc-2.27.so
2.33% 180.5K 0.02% 1 [random.c:295 -> random.c:295] libc-2.27.so
2.28% 176.7K 0.02% 1 [random.c:295 -> random.c:295] libc-2.27.so
2.20% 168.8K 0.02% 1 [rand@plt+0 -> rand@plt+0] div
1.98% 158.2K 0.02% 1 [random_r.c:388 -> random_r.c:388] libc-2.27.so
1.57% 123.3K 0.02% 1 [div.c:42 -> div.c:44] div
1.44% 116.0K 0.42% 19 [random_r.c:357 -> random_r.c:394] libc-2.27.so
0.25% 182.5K 0.02% 1 [random_r.c:388 -> random_r.c:391] libc-2.27.so
0.00% 48 1.07% 48 [x86_pmu_enable+284 -> x86_pmu_enable+298] [kernel.kallsyms]
0.00% 74 1.64% 74 [vm_mmap_pgoff+0 -> vm_mmap_pgoff+92] [kernel.kallsyms]
0.00% 73 1.62% 73 [vm_mmap+0 -> vm_mmap+48] [kernel.kallsyms]
0.00% 63 0.69% 31 [up_write+0 -> up_write+34] [kernel.kallsyms]
0.00% 13 0.29% 13 [setup_arg_pages+396 -> setup_arg_pages+413] [kernel.kallsyms]
0.00% 3 0.07% 3 [setup_arg_pages+418 -> setup_arg_pages+450] [kernel.kallsyms]
0.00% 616 6.84% 308 [security_mmap_file+0 -> security_mmap_file+72] [kernel.kallsyms]
0.00% 23 0.51% 23 [security_mmap_file+77 -> security_mmap_file+87] [kernel.kallsyms]
0.00% 4 0.02% 1 [sched_clock+0 -> sched_clock+4] [kernel.kallsyms]
0.00% 4 0.02% 1 [sched_clock+9 -> sched_clock+12] [kernel.kallsyms]
0.00% 1 0.02% 1 [rcu_nmi_exit+0 -> rcu_nmi_exit+9] [kernel.kallsyms]
Committer testing:
This should provide material for hours of endless joy, both from looking
for suspicious things in the implementation of this patch, such as the
top one:
# Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles [Program Block Range] Shared Object
2.17% 1.7M 0.08% 607 [compiler.h:199 -> common.c:221] [kernel.vmlinux]
As well from things that look legit:
# Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles [Program Block Range] Shared Object
0.16% 123.0K 0.60% 4.7K [nospec-branch.h:265 -> nospec-branch.h:278] [kernel.vmlinux]
:-)
Very short system wide taken branches session:
# perf record -h -b
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-b, --branch-any sample any taken branches
#
# perf record -b
^C[ perf record: Woken up 595 times to write data ]
[ perf record: Captured and wrote 156.672 MB perf.data (196873 samples) ]
#
# perf evlist -v
cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD|BRANCH_STACK, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1, branch_sample_type: ANY
#
# perf report --total-cycles --stdio
# To display the perf.data header info, please use --header/--header-only options.
#
# Total Lost Samples: 0
#
# Samples: 6M of event 'cycles'
# Event count (approx.): 6299936
#
# Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles [Program Block Range] Shared Object
# ............... .............. ........... .......... ...................................................................... ....................
#
2.17% 1.7M 0.08% 607 [compiler.h:199 -> common.c:221] [kernel.vmlinux]
1.75% 1.3M 8.34% 65.5K [memset-vec-unaligned-erms.S:147 -> memset-vec-unaligned-erms.S:151] libc-2.29.so
0.72% 544.5K 0.03% 230 [entry_64.S:657 -> entry_64.S:662] [kernel.vmlinux]
0.56% 541.8K 0.09% 672 [compiler.h:199 -> common.c:300] [kernel.vmlinux]
0.39% 293.2K 0.01% 104 [list_debug.c:43 -> list_debug.c:61] [kernel.vmlinux]
0.36% 278.6K 0.03% 272 [entry_64.S:1289 -> entry_64.S:1308] [kernel.vmlinux]
0.30% 260.8K 0.07% 564 [clear_page_64.S:47 -> clear_page_64.S:50] [kernel.vmlinux]
0.28% 215.3K 0.05% 369 [traps.c:623 -> traps.c:628] [kernel.vmlinux]
0.23% 178.1K 0.04% 278 [entry_64.S:271 -> entry_64.S:275] [kernel.vmlinux]
0.20% 152.6K 0.09% 706 [paravirt.c:177 -> paravirt.c:179] [kernel.vmlinux]
0.20% 155.8K 0.05% 373 [entry_64.S:153 -> entry_64.S:175] [kernel.vmlinux]
0.18% 136.6K 0.03% 222 [msr.h:105 -> msr.h:166] [kernel.vmlinux]
0.16% 123.0K 0.60% 4.7K [nospec-branch.h:265 -> nospec-branch.h:278] [kernel.vmlinux]
0.16% 118.3K 0.01% 44 [entry_64.S:632 -> entry_64.S:657] [kernel.vmlinux]
0.14% 104.5K 0.00% 28 [rwsem.c:1541 -> rwsem.c:1544] [kernel.vmlinux]
0.13% 99.2K 0.01% 53 [spinlock.c:150 -> spinlock.c:152] [kernel.vmlinux]
0.13% 95.5K 0.00% 35 [swap.c:456 -> swap.c:471] [kernel.vmlinux]
0.12% 96.2K 0.05% 407 [copy_user_64.S:175 -> copy_user_64.S:209] [kernel.vmlinux]
0.11% 85.9K 0.00% 31 [swap.c:400 -> page-flags.h:188] [kernel.vmlinux]
0.10% 73.0K 0.01% 52 [paravirt.h:763 -> list.h:131] [kernel.vmlinux]
0.07% 56.2K 0.03% 214 [filemap.c:1524 -> filemap.c:1557] [kernel.vmlinux]
0.07% 54.2K 0.02% 145 [memory.c:1032 -> memory.c:1049] [kernel.vmlinux]
0.07% 50.3K 0.00% 39 [mmzone.c:49 -> mmzone.c:69] [kernel.vmlinux]
0.06% 48.3K 0.01% 40 [paravirt.h:768 -> page_alloc.c:3304] [kernel.vmlinux]
0.06% 46.7K 0.02% 155 [memory.c:1032 -> memory.c:1056] [kernel.vmlinux]
0.06% 46.9K 0.01% 103 [swap.c:867 -> swap.c:902] [kernel.vmlinux]
0.06% 47.8K 0.00% 34 [entry_64.S:1201 -> entry_64.S:1202] [kernel.vmlinux]
-----------------------------------------------------------
v7:
---
Use use_browser in report__browse_block_hists for supporting
stdio and potential tui mode.
v6:
---
Create report__browse_block_hists in block-info.c (codes are
moved from builtin-report.c). It's called from
perf_evlist__tty_browse_hists.
v5:
---
1. Move all block functions to block-info.c
2. Move the code of setting ms in block hist_entry to
other patch.
v4:
---
1. Use new option '--total-cycles' to replace
'-s total_cycles' in v3.
2. Move block info collection out of block info
printing.
v3:
---
1. Use common function block_info__process_sym to
process the blocks per symbol.
2. Remove the nasty hack for skipping calculation
of column length
3. Some minor cleanup
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191107074719.26139-6-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The patch adds a new option to limit the output file size, then based on
it, we can create a wrapper of the perf command that uses the option to
avoid exhausting the disk space by the unconscious user.
In order to make the perf.data parsable, we just limit the sample data
size, since the perf.data consists of many headers and sample data and
other data, the actual size of the recorded file will bigger than the
setting value.
Testing it:
# ./perf record -a -g --max-size=10M
Couldn't synthesize bpf events.
[ perf record: perf size limit reached (10249 KB), stopping session ]
[ perf record: Woken up 32 times to write data ]
[ perf record: Captured and wrote 10.133 MB perf.data (71964 samples) ]
# ls -lh perf.data
-rw------- 1 root root 11M Oct 22 14:32 perf.data
# ./perf record -a -g --max-size=10K
[ perf record: perf size limit reached (10 KB), stopping session ]
Couldn't synthesize bpf events.
[ perf record: Woken up 0 times to write data ]
[ perf record: Captured and wrote 1.546 MB perf.data (69 samples) ]
# ls -l perf.data
-rw------- 1 root root 1626952 Oct 22 14:36 perf.data
Committer notes:
Fixed the build in multiple distros by using PRIu64 to print u64 struct
members, fixing this:
builtin-record.c: In function 'record__write':
builtin-record.c:150:5: error: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'u64' [-Werror=format=]
rec->bytes_written >> 10);
^
CC /tmp/build/pe
Signed-off-by: Jiwei Sun <jiwei.sun@windriver.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Danter <richard.danter@windriver.com>
Link: http://lore.kernel.org/lkml/20191022080901.3841-1-jiwei.sun@windriver.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Adding new --per-node option to aggregate counts per NUMA
nodes for system-wide mode measurements.
You can specify --per-node in live mode:
# perf stat -a -I 1000 -e cycles --per-node
# time node cpus counts unit events
1.000542550 N0 20 6,202,097 cycles
1.000542550 N1 20 639,559 cycles
2.002040063 N0 20 7,412,495 cycles
2.002040063 N1 20 2,185,577 cycles
3.003451699 N0 20 6,508,917 cycles
3.003451699 N1 20 765,607 cycles
...
Or in the record/report stat session:
# perf stat record -a -I 1000 -e cycles
# time counts unit events
1.000536937 10,008,468 cycles
2.002090152 9,578,539 cycles
3.003625233 7,647,869 cycles
4.005135036 7,032,086 cycles
^C 4.340902364 3,923,893 cycles
# perf stat report --per-node
# time node cpus counts unit events
1.000536937 N0 20 9,355,086 cycles
1.000536937 N1 20 653,382 cycles
2.002090152 N0 20 7,712,838 cycles
2.002090152 N1 20 1,865,701 cycles
3.003625233 N0 20 6,604,441 cycles
3.003625233 N1 20 1,043,428 cycles
4.005135036 N0 20 6,350,522 cycles
4.005135036 N1 20 681,564 cycles
4.340902364 N0 20 3,403,188 cycles
4.340902364 N1 20 520,705 cycles
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20190904073415.723-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a new 'perf record' option '--kcore' which will put a copy of
/proc/kcore, kallsyms and modules into a perf.data directory. Note, that
without the --kcore option, output goes to a file as previously. The
tools' -o and -i options work with either a file name or directory name.
Example:
$ sudo perf record --kcore uname
$ sudo tree perf.data
perf.data
├── kcore_dir
│ ├── kallsyms
│ ├── kcore
│ └── modules
└── data
$ sudo perf script -v
build id event received for vmlinux: 1eaa285996affce2d74d8e66dcea09a80c9941de
build id event received for [vdso]: 8bbaf5dc62a9b644b4d4e4539737e104e4a84541
Samples for 'cycles' event do not have CPU attribute set. Skipping 'cpu' field.
Using CPUID GenuineIntel-6-8E-A
Using perf.data/kcore_dir/kcore for kernel data
Using perf.data/kcore_dir/kallsyms for symbols
perf 19058 506778.423729: 1 cycles: ffffffffa2caa548 native_write_msr+0x8 (vmlinux)
perf 19058 506778.423733: 1 cycles: ffffffffa2caa548 native_write_msr+0x8 (vmlinux)
perf 19058 506778.423734: 7 cycles: ffffffffa2caa548 native_write_msr+0x8 (vmlinux)
perf 19058 506778.423736: 117 cycles: ffffffffa2caa54a native_write_msr+0xa (vmlinux)
perf 19058 506778.423738: 2092 cycles: ffffffffa2c9b7b0 native_apic_msr_write+0x0 (vmlinux)
perf 19058 506778.423740: 37380 cycles: ffffffffa2f121d0 perf_event_addr_filters_exec+0x0 (vmlinux)
uname 19058 506778.423751: 582673 cycles: ffffffffa303a407 propagate_protected_usage+0x147 (vmlinux)
uname 19058 506778.423892: 2241841 cycles: ffffffffa2cae0c9 unwind_next_frame.part.5+0x79 (vmlinux)
uname 19058 506778.424430: 2457397 cycles: ffffffffa3019232 check_memory_region+0x52 (vmlinux)
Committer testing:
# rm -rf perf.data*
# perf record sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.024 MB perf.data (7 samples) ]
# ls -l perf.data
-rw-------. 1 root root 34772 Oct 21 11:08 perf.data
# perf record --kcore uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.024 MB perf.data (7 samples) ]
ls[root@quaco ~]# ls -lad perf.data*
drwx------. 3 root root 4096 Oct 21 11:08 perf.data
-rw-------. 1 root root 34772 Oct 21 11:08 perf.data.old
# perf evlist -v
cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1
# perf evlist -v -i perf.data/data
cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1
#
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lore.kernel.org/lkml/20191004083121.12182-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Support directory output that contains a regular perf.data file, named
"data". By default the directory is named perf.data i.e.
perf.data
└── data
Most of the infrastructure to support a directory is already there. This
patch makes the changes needed to support the format above.
Presently there is no 'perf record' option to output a directory.
This is preparation for adding support for putting a copy of /proc/kcore in
the directory.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20191004083121.12182-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
There are some deprecated events listed by perf list. But we can't
remove them from perf list with ease because some old scripts may use
them.
Deprecated events are old names of renamed events. When an event gets
renamed the old name is kept around for some time and marked with
Deprecated. The newer Intel event lists in the tree already have these
headers.
So we need to keep them in the event list, but provide a new option to
show them. The new option is "--deprecated".
With this patch, the deprecated events are hidden by default but they
can be displayed when option "--deprecated" is enabled.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191015025357.8708-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To be used with -S or -s, using just this new option implies -s,
examples:
# perf trace --errno-summary sleep 1
Summary of events:
sleep (10793), 80 events, 93.0%
syscall calls errors total min avg max stddev
(msec) (msec) (msec) (msec) (%)
--------------- -------- ------ -------- --------- --------- --------- ------
nanosleep 1 0 1000.427 1000.427 1000.427 1000.427 0.00%
mmap 8 0 0.026 0.002 0.003 0.005 9.18%
close 5 0 0.018 0.001 0.004 0.009 48.97%
mprotect 4 0 0.017 0.003 0.004 0.006 16.49%
openat 3 0 0.012 0.003 0.004 0.005 9.41%
munmap 1 0 0.010 0.010 0.010 0.010 0.00%
brk 4 0 0.005 0.001 0.001 0.002 22.77%
read 4 0 0.005 0.001 0.001 0.002 22.33%
access 1 1 0.004 0.004 0.004 0.004 0.00%
ENOENT: 1
fstat 3 0 0.004 0.001 0.001 0.002 17.18%
lseek 3 0 0.003 0.001 0.001 0.001 11.62%
arch_prctl 2 1 0.002 0.001 0.001 0.001 3.32%
EINVAL: 1
execve 1 0 0.000 0.000 0.000 0.000 0.00%
#
Works as well together with --failure and -S, i.e. collect the stats and
show just the syscalls that failed:
# perf trace --failure -S --errno-summary sleep 1
0.032 arch_prctl(option: 0x3001, arg2: 0x7fffdb11b580) = -1 EINVAL (Invalid argument)
0.045 access(filename: "/etc/ld.so.preload", mode: R) = -1 ENOENT (No such file or directory)
Summary of events:
sleep (10806), 80 events, 93.0%
syscall calls errors total min avg max stddev
(msec) (msec) (msec) (msec) (%)
--------------- -------- ------ -------- --------- --------- --------- ------
nanosleep 1 0 1000.094 1000.094 1000.094 1000.094 0.00%
mmap 8 0 0.026 0.002 0.003 0.005 9.06%
close 5 0 0.018 0.001 0.004 0.010 49.58%
mprotect 4 0 0.017 0.003 0.004 0.006 17.56%
openat 3 0 0.014 0.004 0.005 0.006 12.29%
munmap 1 0 0.010 0.010 0.010 0.010 0.00%
brk 4 0 0.005 0.001 0.001 0.002 22.75%
read 4 0 0.005 0.001 0.001 0.002 17.19%
access 1 1 0.005 0.005 0.005 0.005 0.00%
ENOENT: 1
fstat 3 0 0.004 0.001 0.001 0.002 21.66%
lseek 3 0 0.003 0.001 0.001 0.001 11.71%
arch_prctl 2 1 0.002 0.001 0.001 0.001 2.66%
EINVAL: 1
execve 1 0 0.000 0.000 0.000 0.000 0.00%
#
Suggested-by: Andi Kleen <ak@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-l0mjwczkpouov7lss5zn8d9h@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
'perf record' has supported --all-kernel / --all-user to configure all
used events to run in kernel space or run in user space. But 'perf stat'
doesn't support these options.
It would be useful to support these options in 'perf stat' too to keep
the same semantics available in both tools.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191011050545.3899-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch prints the stddev and hist for the cycles diff of program
block. It can help us to understand if the cycles is noisy or not.
This patch is inspired by Andi Kleen's patch:
https://lwn.net/Articles/600471/
We create new option '--cycles-hist'.
Example:
perf record -b ./div
perf record -b ./div
perf diff -c cycles
# Baseline [Program Block Range] Cycles Diff Shared Object Symbol
# ........ .......................................................... .... ................. ............................
#
46.72% [div.c:40 -> div.c:40] 0 div [.] main
46.72% [div.c:42 -> div.c:44] 0 div [.] main
46.72% [div.c:42 -> div.c:39] 0 div [.] main
20.54% [random_r.c:357 -> random_r.c:394] 1 libc-2.27.so [.] __random_r
20.54% [random_r.c:357 -> random_r.c:380] 0 libc-2.27.so [.] __random_r
20.54% [random_r.c:388 -> random_r.c:388] 0 libc-2.27.so [.] __random_r
20.54% [random_r.c:388 -> random_r.c:391] 0 libc-2.27.so [.] __random_r
17.04% [random.c:288 -> random.c:291] 0 libc-2.27.so [.] __random
17.04% [random.c:291 -> random.c:291] 0 libc-2.27.so [.] __random
17.04% [random.c:293 -> random.c:293] 0 libc-2.27.so [.] __random
17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random
17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random
17.04% [random.c:298 -> random.c:298] 0 libc-2.27.so [.] __random
8.40% [div.c:22 -> div.c:25] 0 div [.] compute_flag
8.40% [div.c:27 -> div.c:28] 0 div [.] compute_flag
5.14% [rand.c:26 -> rand.c:27] 0 libc-2.27.so [.] rand
5.14% [rand.c:28 -> rand.c:28] 0 libc-2.27.so [.] rand
2.15% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt
0.00% [kernel.kallsyms] [k] __x86_indirect_thunk_rax
0.00% [do_mmap+714 -> do_mmap+732] -10 [kernel.kallsyms] [k] do_mmap
0.00% [do_mmap+737 -> do_mmap+765] 1 [kernel.kallsyms] [k] do_mmap
0.00% [do_mmap+262 -> do_mmap+299] 0 [kernel.kallsyms] [k] do_mmap
0.00% [__x86_indirect_thunk_r15+0 -> __x86_indirect_thunk_r15+0] 7 [kernel.kallsyms] [k] __x86_indirect_thunk_r15
0.00% [native_sched_clock+0 -> native_sched_clock+119] -1 [kernel.kallsyms] [k] native_sched_clock
0.00% [native_write_msr+0 -> native_write_msr+16] -13 [kernel.kallsyms] [k] native_write_msr
When we enable the option '--cycles-hist', the output is
perf diff -c cycles --cycles-hist
# Baseline [Program Block Range] Cycles Diff stddev/Hist Shared Object Symbol
# ........ .......................................................... .... ................. ................. ............................
#
46.72% [div.c:40 -> div.c:40] 0 ± 37.8% ▁█▁▁██▁█ div [.] main
46.72% [div.c:42 -> div.c:44] 0 ± 49.4% ▁▁▂█▂▂▂▂ div [.] main
46.72% [div.c:42 -> div.c:39] 0 ± 24.1% ▃█▂▄▁▃▂▁ div [.] main
20.54% [random_r.c:357 -> random_r.c:394] 1 ± 33.5% ▅▂▁█▃▁▂▁ libc-2.27.so [.] __random_r
20.54% [random_r.c:357 -> random_r.c:380] 0 ± 39.4% ▁▁█▁██▅▁ libc-2.27.so [.] __random_r
20.54% [random_r.c:388 -> random_r.c:388] 0 libc-2.27.so [.] __random_r
20.54% [random_r.c:388 -> random_r.c:391] 0 ± 41.2% ▁▃▁▂█▄▃▁ libc-2.27.so [.] __random_r
17.04% [random.c:288 -> random.c:291] 0 ± 48.8% ▁▁▁▁███▁ libc-2.27.so [.] __random
17.04% [random.c:291 -> random.c:291] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random
17.04% [random.c:293 -> random.c:293] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random
17.04% [random.c:295 -> random.c:295] 0 ±100.0% ▁█▁▁▁▁▁▁ libc-2.27.so [.] __random
17.04% [random.c:295 -> random.c:295] 0 libc-2.27.so [.] __random
17.04% [random.c:298 -> random.c:298] 0 ± 75.6% ▃█▁▁▁▁▁▁ libc-2.27.so [.] __random
8.40% [div.c:22 -> div.c:25] 0 ± 42.1% ▁▃▁▁███▁ div [.] compute_flag
8.40% [div.c:27 -> div.c:28] 0 ± 41.8% ██▁▁▄▁▁▄ div [.] compute_flag
5.14% [rand.c:26 -> rand.c:27] 0 ± 37.8% ▁▁▁████▁ libc-2.27.so [.] rand
5.14% [rand.c:28 -> rand.c:28] 0 libc-2.27.so [.] rand
2.15% [rand@plt+0 -> rand@plt+0] 0 div [.] rand@plt
0.00% [kernel.kallsyms] [k] __x86_indirect_thunk_rax
0.00% [do_mmap+714 -> do_mmap+732] -10 [kernel.kallsyms] [k] do_mmap
0.00% [do_mmap+737 -> do_mmap+765] 1 [kernel.kallsyms] [k] do_mmap
0.00% [do_mmap+262 -> do_mmap+299] 0 [kernel.kallsyms] [k] do_mmap
0.00% [__x86_indirect_thunk_r15+0 -> __x86_indirect_thunk_r15+0] 7 [kernel.kallsyms] [k] __x86_indirect_thunk_r15
0.00% [native_sched_clock+0 -> native_sched_clock+119] -1 ± 38.5% ▄█▁ [kernel.kallsyms] [k] native_sched_clock
0.00% [native_write_msr+0 -> native_write_msr+16] -13 ± 47.1% ▁█▇▃▁▁ [kernel.kallsyms] [k] native_write_msr
v8:
---
Rebase to perf/core branch
v7:
---
1. v6 got Jiri's ACK.
2. Rebase to latest perf/core branch.
v6:
---
1. Jiri provides better code for using data__hpp_register() in ui_init().
Use this code in v6.
v5:
---
1. Refine the use of data__hpp_register() in ui_init() according to
Jiri's suggestion.
v4:
---
1. Rename the new option from '--noisy' to '--cycles-hist'
2. Remove the option '-n'.
3. Only update the spark value and stats when '--cycles-hist' is enabled.
4. Remove the code of printing '..'.
v3:
---
1. Move the histogram to a separate column
2. Move the svals[] out of struct stats
v2:
---
Jiri got a compile error,
CC builtin-diff.o
builtin-diff.c: In function ‘compute_cycles_diff’:
builtin-diff.c:712:10: error: taking the absolute value of unsigned type ‘u64’ {aka ‘long unsigned int’} has no effect [-Werror=absolute-value]
712 | labs(pair->block_info->cycles_spark[i] -
| ^~~~
Because the result of u64 - u64 is still u64. Now we change the type of
cycles_spark[] to s64.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20190925011446.30678-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Similar to what is in 'perf record', works just like there:
# perf trace -e msr:*
328.297 :0/0 msr:write_msr(msr: FS_BASE, val: 140240388381888)
328.302 :0/0 msr:write_msr(msr: FS_BASE, val: 140240388381888)
328.306 :0/0 msr:write_msr(msr: FS_BASE, val: 140240388381888)
328.317 :0/0 msr:write_msr(msr: FS_BASE, val: 140240388381888)
328.322 :0/0 msr:write_msr(msr: FS_BASE, val: 140240388381888)
328.327 :0/0 msr:write_msr(msr: FS_BASE, val: 140240388381888)
328.331 :0/0 msr:write_msr(msr: FS_BASE, val: 140240388381888)
328.336 :0/0 msr:write_msr(msr: FS_BASE, val: 140240388381888)
328.340 :0/0 ^Cmsr:write_msr(msr: FS_BASE, val: 140240388381888)
#
So, for a system wide trace session looking at the write_msr tracepoint
we see a flood of MSR_FS_BASE, we need to get the number for that:
# grep FS_BASE /tmp/build/perf/trace/beauty/generated/x86_arch_MSRs_array.c
[0xc0000100 - x86_64_specific_MSRs_offset] = "FS_BASE",
#
And then use it in a filter:
# perf trace -e msr:* --filter="msr!=0xc0000100"
<SNIP>
942.177 :0/0 msr:write_msr(msr: IA32_TSC_DEADLINE, val: 3056931068232)
942.199 :0/0 msr:write_msr(msr: IA32_TSC_DEADLINE, val: 3057135655252)
942.203 :0/0 msr:write_msr(msr: IA32_TSC_DEADLINE, val: 3056931068222)
942.231 :0/0 msr:write_msr(msr: IA32_TSC_DEADLINE, val: 3056998373022)
942.241 :0/0 msr:write_msr(msr: IA32_TSC_DEADLINE, val: 3056931068236)
<SNIP>
#
Ok, lets filter that too, too noisy:
# grep TSC_DEADLINE /tmp/build/perf/trace/beauty/generated/x86_arch_MSRs_array.c
[0x000006E0] = "IA32_TSC_DEADLINE",
#
# perf trace -e msr:* --filter="msr!=0xc0000100 && msr!=0x6e0" -a sleep 0.1
0.000 :0/0 msr:read_msr(msr: IA32_TSC_ADJUST)
0.066 CPU 0/KVM/4895 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6)
0.070 CPU 0/KVM/4895 msr:write_msr(msr: 0x830, val: 34359740667)
0.099 CPU 0/KVM/4895 msr:read_msr(msr: IA32_SYSENTER_ESP, val: -2199021993472)
0.100 CPU 0/KVM/4895 msr:read_msr(msr: IA32_APICBASE, val: 4276096000)
0.101 CPU 0/KVM/4895 msr:read_msr(msr: IA32_DEBUGCTLMSR)
0.109 :0/0 msr:write_msr(msr: IA32_SPEC_CTRL)
1.000 :0/0 msr:write_msr(msr: 0x830, val: 17179871485)
18.893 :0/0 msr:write_msr(msr: 0x83f, val: 246)
28.810 :0/0 msr:write_msr(msr: 0x830, val: 68719479037)
40.117 CPU 0/KVM/4895 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6)
40.127 CPU 0/KVM/4895 msr:read_msr(msr: IA32_DEBUGCTLMSR)
40.139 CPU 0/KVM/4895 msr:write_msr(msr: LSTAR, val: -2130661312)
40.141 CPU 0/KVM/4895 msr:write_msr(msr: SYSCALL_MASK, val: 14080)
40.142 CPU 0/KVM/4895 msr:write_msr(msr: TSC_AUX)
40.144 CPU 0/KVM/4895 msr:write_msr(msr: KERNEL_GS_BASE)
40.147 CPU 0/KVM/4895 msr:write_msr(msr: IA32_SPEC_CTRL)
40.148 CPU 0/KVM/4895 msr:write_msr(msr: IA32_FLUSH_CMD, val: 1)
40.151 CPU 0/KVM/4895 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6)
^C
#
One can combine that with filtering pids as well:
# perf trace -e msr:* --filter="msr!=0xc0000100 && msr!=0x6e0" --filter-pids 4895 -a sleep 0.09
0.000 :0/0 msr:write_msr(msr: 0x830, val: 4294969597)
0.291 gnome-terminal/2790 msr:write_msr(msr: SYSCALL_MASK, val: 292608)
0.294 gnome-terminal/2790 msr:write_msr(msr: LSTAR, val: -1935671280)
0.295 gnome-terminal/2790 msr:write_msr(msr: TSC_AUX, val: 6)
10.940 gnome-terminal/2790 msr:write_msr(msr: 0x830, val: 4294969597)
15.943 gnome-shell/2096 msr:write_msr(msr: 0x830, val: 4294969597)
16.975 :0/0 msr:write_msr(msr: 0x830, val: 4294969597)
19.560 :0/0 msr:write_msr(msr: 0x83f, val: 246)
25.162 :0/0 msr:read_msr(msr: IA32_TSC_ADJUST)
25.807 JS Watchdog/3635 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6)
25.820 :0/0 msr:write_msr(msr: IA32_SPEC_CTRL)
25.941 gnome-terminal/2790 msr:write_msr(msr: 0x830, val: 4294969597)
26.941 gnome-terminal/2790 msr:write_msr(msr: 0x830, val: 4294969597)
29.942 gnome-terminal/2790 msr:write_msr(msr: 0x830, val: 4294969597)
45.313 :0/0 msr:write_msr(msr: 0x83f, val: 246)
56.945 gnome-terminal/2790 msr:write_msr(msr: 0x830, val: 4294969597)
60.946 gnome-terminal/2790 msr:write_msr(msr: 0x830, val: 4294969597)
74.096 JS Watchdog/8971 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6)
74.130 :0/0 msr:write_msr(msr: IA32_SPEC_CTRL)
79.673 :0/0 msr:write_msr(msr: 0x83f, val: 246)
79.947 gnome-terminal/2790 msr:write_msr(msr: 0x830, val: 17179871485)
#
Or for just a pid, with callchains:
# grep SYSCALL_MAS /tmp/build/perf/trace/beauty/generated/x86_arch_MSRs_array.c
[0xc0000084 - x86_64_specific_MSRs_offset] = "SYSCALL_MASK",
# perf trace -e msr:* --filter="msr==0xc0000084" --pid 2790 --call-graph=dwarf
0.000 gnome-terminal/2790 msr:write_msr(msr: SYSCALL_MASK, val: 292608)
do_trace_write_msr ([kernel.kallsyms])
do_trace_write_msr ([kernel.kallsyms])
kvm_on_user_return ([kvm])
fire_user_return_notifiers ([kernel.kallsyms])
exit_to_usermode_loop ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
entry_SYSCALL_64 ([kernel.kallsyms])
__GI___poll (inlined)
9299.073 gnome-terminal/2790 msr:write_msr(msr: SYSCALL_MASK, val: 292608)
do_trace_write_msr ([kernel.kallsyms])
do_trace_write_msr ([kernel.kallsyms])
kvm_on_user_return ([kvm])
fire_user_return_notifiers ([kernel.kallsyms])
exit_to_usermode_loop ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
entry_SYSCALL_64 ([kernel.kallsyms])
__GI___poll (inlined)
9348.374 gnome-terminal/2790 msr:write_msr(msr: SYSCALL_MASK, val: 292608)
do_trace_write_msr ([kernel.kallsyms])
do_trace_write_msr ([kernel.kallsyms])
kvm_on_user_return ([kvm])
fire_user_return_notifiers ([kernel.kallsyms])
exit_to_usermode_loop ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
entry_SYSCALL_64 ([kernel.kallsyms])
__GI___poll (inlined)
<SNIP>
#
Ok, just another form of KVM to emit MSRs :-)
Next step: elliminate those greps by getting the filter expression,
looking for arg names, then for the arrays associated with it to do a
reverse lookup.
Also allow those filters to be associated with strace-like syscall
names.
After that: augment the 'val' arg for 'msr:write_msr' based on the first
arg, 'msr'.
Then, do that with eBPF too, not just with tracepoint filters.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-95bfe5d4tzy5f66bx49d05rj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
So far we used the libtraceevent printing routines when showing
tracepoint arguments, but since 'perf trace' has a lot of beautifiers
for syscall arguments, and since some of those can be used to augment
tracepoint arguments, add a routine to make use of those beautifiers
and allow the user to choose which one to use.
The default now is to use the same beautifiers used for the strace-like
sys_enter+sys_exit lines, but the user can choose the libtraceevent ones
by either using the:
perf trace --libtraceevent_print
command line option, or by setting:
# cat ~/.perfconfig
[trace]
tracepoint_beautifiers = libtraceevent
For instance, here are some examples:
# perf trace -e sched:*switch,*sleep,sched:*wakeup,exit*,sched:*exit sleep 1
0.000 sched:sched_wakeup(comm: "perf", pid: 5273 (perf), prio: 120, success: 1, target_cpu: 6)
0.621 nanosleep(rqtp: 0x7ffdd06d1140, rmtp: NULL) ...
0.628 sched:sched_switch(prev_comm: "sleep", prev_pid: 5273 (sleep), prev_prio: 120, prev_state: 1, next_comm: "swapper/6", next_pid: 0, next_prio: 120)
1000.879 sched:sched_wakeup(comm: "sleep", pid: 5273 (sleep), prio: 120, success: 1, target_cpu: 6)
0.621 ... [continued]: nanosleep()) = 0
1001.026 exit_group(error_code: 0) = ?
1001.216 sched:sched_process_exit(comm: "sleep", pid: 5273 (sleep), prio: 120)
#
And then using libtraceevent, as before:
# perf trace --libtraceevent_print -e sched:*switch,*sleep,sched:*wakeup,exit*,sched:*exit sleep 1
0.000 sched:sched_wakeup(comm=perf pid=5288 prio=120 target_cpu=001)
0.739 nanosleep(rqtp: 0x7ffeba6c2f40, rmtp: NULL) ...
0.747 sched:sched_switch(prev_comm=sleep prev_pid=5288 prev_prio=120 prev_state=S ==> next_comm=swapper/1 next_pid=0 next_prio=120)
1000.902 sched:sched_wakeup(comm=sleep pid=5288 prio=120 target_cpu=001)
0.739 ... [continued]: nanosleep()) = 0
1001.012 exit_group(error_code: 0) = ?
#
The new default allocates an array of 'struct syscall_arg_fmt' for the
tracepoint arguments and, just like with syscall arguments, tries to
find suitable syscall_arg__scnprintf_NAME() routines to augment those
tracepoint arguments based on their type (as in the tracefs "format"
file), or even in their name + type, for instance arguntents with names
ending in "fd" with type "int" get the fd scnprintf beautifier attached,
etc.
Soon this will take advantage of the kernel BTF information to augment
enumerations based on the tracefs "format" type info.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-o8qdluotkcb3b1x2gjqrejcl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Specification claims latest version of jitdump file format is 2. Current
jit dump reading code treats 1 as the latest version.
Correct spec to match code.
The original language made it unclear the value to be written in the
magic field.
Revise language that the writer always writes the same value. Specify
that the reader uses the value to detect endian mismatches.
Signed-off-by: Steve MacLean <Steve.MacLean@Microsoft.com>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Brian Robbins <brianrob@microsoft.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Eric Saint-Etienne <eric.saint.etienne@oracle.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Keeping <john@metanate.com>
Cc: John Salem <josalem@microsoft.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Tom McDonald <thomas.mcdonald@microsoft.com>
Link: http://lore.kernel.org/lkml/BN8PR21MB1362F63CDE7AC69736FC7F9EF7800@BN8PR21MB1362.namprd21.prod.outlook.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
With this change if a perf_date parameter is provided to asciidoc then
it will override the default date written to the man page metadata.
Without this change, or if the perf_date isn't specified, then the
current date is written to the metadata.
Having this parameter allows the metadata to be constant if builds
happen on different dates.
The name of the parameter is intended to be consistent with the existing
perf_version parameter.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20190921041327.155054-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Since 'perf top' shares the histogram browser with 'perf report', then
the same explanation in the previous cset applies.
An additional example uses a pair of SDT events available for systemtap:
# perf probe --exec=/usr/bin/stap '%*:*'
Added new events:
sdt_stap:benchmark__thread__start (on %* in /usr/bin/stap)
sdt_stap:benchmark (on %* in /usr/bin/stap)
sdt_stap:benchmark__thread__end (on %* in /usr/bin/stap)
sdt_stap:pass6__start (on %* in /usr/bin/stap)
sdt_stap:pass6__end (on %* in /usr/bin/stap)
sdt_stap:pass5__start (on %* in /usr/bin/stap)
sdt_stap:pass5__end (on %* in /usr/bin/stap)
sdt_stap:pass0__start (on %* in /usr/bin/stap)
sdt_stap:pass0__end (on %* in /usr/bin/stap)
sdt_stap:pass1a__start (on %* in /usr/bin/stap)
sdt_stap:pass1b__start (on %* in /usr/bin/stap)
sdt_stap:pass1__end (on %* in /usr/bin/stap)
sdt_stap:pass2__start (on %* in /usr/bin/stap)
sdt_stap:pass2__end (on %* in /usr/bin/stap)
sdt_stap:pass3__start (on %* in /usr/bin/stap)
sdt_stap:pass3__end (on %* in /usr/bin/stap)
sdt_stap:pass4__start (on %* in /usr/bin/stap)
sdt_stap:pass4__end (on %* in /usr/bin/stap)
sdt_stap:benchmark__start (on %* in /usr/bin/stap)
sdt_stap:benchmark__end (on %* in /usr/bin/stap)
sdt_stap:cache__get (on %* in /usr/bin/stap)
sdt_stap:cache__clean (on %* in /usr/bin/stap)
sdt_stap:cache__add__module (on %* in /usr/bin/stap)
sdt_stap:cache__add__source (on %* in /usr/bin/stap)
sdt_stap:stap_system__complete (on %* in /usr/bin/stap)
sdt_stap:stap_system__start (on %* in /usr/bin/stap)
sdt_stap:stap_system__spawn (on %* in /usr/bin/stap)
sdt_stap:stap_system__fork (on %* in /usr/bin/stap)
sdt_stap:intern_string (on %* in /usr/bin/stap)
sdt_stap:client__start (on %* in /usr/bin/stap)
sdt_stap:client__end (on %* in /usr/bin/stap)
You can now use it in all perf tools, such as:
perf record -e sdt_stap:client__end -aR sleep 1
#
From these we're use the two below to run systemtap's test suite:
# perf record -e sdt_stap:pass2__*,cycles:P make installcheck > /dev/null
^C[ perf record: Woken up 8 times to write data ]
[ perf record: Captured and wrote 2.691 MB perf.data (39638 samples) ]
Terminated
# perf script | grep sdt_stap
stap 28979 [000] 19424.302660: sdt_stap:pass2__start: (561b9a537de3) arg1=140730364262544
stap 28979 [000] 19424.333083: sdt_stap:pass2__end: (561b9a53a9e1) arg1=140730364262544
stap 29045 [006] 19424.933460: sdt_stap:pass2__start: (563edddcede3) arg1=140722674883152
stap 29045 [006] 19424.963794: sdt_stap:pass2__end: (563edddd19e1) arg1=140722674883152
# perf script | grep cycles | wc -l
39634
#
Looking at the whole perf.data file:
[root@quaco testsuite]# perf report | grep cycles:P -A25
# Samples: 39K of event 'cycles:P'
# Event count (approx.): 34044267368
#
# Overhead Command Shared Object Symbol
# ........ ....... .................... ................................
#
3.50% cc1 cc1 [.] ht_lookup_with_hash
3.04% cc1 cc1 [.] _cpp_lex_token
2.11% cc1 cc1 [.] ggc_internal_alloc
1.83% cc1 cc1 [.] cpp_get_token_with_location
1.68% cc1 libc-2.29.so [.] _int_malloc
1.41% cc1 cc1 [.] linemap_position_for_column
1.25% cc1 cc1 [.] ggc_internal_cleared_alloc
1.20% cc1 cc1 [.] c_lex_with_flags
1.18% cc1 cc1 [.] get_combined_adhoc_loc
1.05% cc1 libc-2.29.so [.] malloc
1.01% cc1 libc-2.29.so [.] _int_free
0.96% stap stap [.] std::_Hashtable<std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >, std::allocator<std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > >, std::__detail::_Identity, std::equal_to<std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > >, stringtable_hash, std::__detail::_Mod_range_hashing, std::__detail::_Default_ranged_hash, std::__detail::_Prime_rehash_policy, std::__detail::_Hashtable_traits<true, true, true> >::_M_insert<std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, std::__detail::_AllocNode<std::allocator<std::__detail::_Hash_node<std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >, true> > > >
0.78% stap stap [.] lexer::scan
0.74% cc1 cc1 [.] _cpp_lex_direct
0.70% cc1 cc1 [.] pop_scope
0.70% cc1 cc1 [.] c_parser_declspecs
0.69% stap libc-2.29.so [.] _int_malloc
0.68% cc1 cc1 [.] htab_find_slot
0.68% cc1 [kernel.vmlinux] [k] prepare_exit_to_usermode
0.64% cc1 [kernel.vmlinux] [k] clear_page_erms
[root@quaco testsuite]#
And now only what happens in slices demarcated by those start/end SDT
events:
[root@quaco testsuite]# perf report --switch-on=sdt_stap:pass2__start --switch-off=sdt_stap:pass2__end | grep cycles:P -A100
# Samples: 240 of event 'cycles:P'
# Event count (approx.): 206491934
#
# Overhead Command Shared Object Symbol
# ........ ....... ................... ................................................
#
38.99% stap stap [.] systemtap_session::register_library_aliases
19.47% stap stap [.] match_key::operator<
15.01% stap libc-2.29.so [.] __memcmp_avx2_movbe
5.19% stap libc-2.29.so [.] _int_malloc
2.50% stap libstdc++.so.6.0.26 [.] std::_Rb_tree_insert_and_rebalance
2.30% stap stap [.] match_node::build_no_more
2.07% stap libc-2.29.so [.] malloc
1.66% stap stap [.] std::_Rb_tree<match_key, std::pair<match_key const, match_node*>, std::_Select1st<std::pair<match_key const, match_node*> >, std::less<match_key>, std::allocator<std::pair<match_key const, match_node*> > >::find
1.66% stap stap [.] match_node::bind
1.58% stap [kernel.vmlinux] [k] prepare_exit_to_usermode
1.17% stap [kernel.vmlinux] [k] native_irq_return_iret
0.87% stap stap [.] 0x0000000000032ec4
0.77% stap libstdc++.so.6.0.26 [.] std::_Rb_tree_increment
0.47% stap stap [.] std::vector<derived_probe_builder*, std::allocator<derived_probe_builder*> >::_M_realloc_insert<derived_probe_builder* const&>
0.47% stap [kernel.vmlinux] [k] get_page_from_freelist
0.47% stap [kernel.vmlinux] [k] swapgs_restore_regs_and_return_to_usermode
0.47% stap [kernel.vmlinux] [k] do_user_addr_fault
0.46% stap [kernel.vmlinux] [k] __pagevec_lru_add_fn
0.46% stap stap [.] std::_Rb_tree<match_key, std::pair<match_key const, match_node*>, std::_Select1st<std::pair<match_key const, match_node*> >, std::less<match_key>, std::allocator<std::pair<match_key const, match_node*> > >::_M_emplace_unique<std::pair<match_key, match_node*> >
0.42% stap libstdc++.so.6.0.26 [.] 0x00000000000c18fa
0.40% stap [kernel.vmlinux] [k] interrupt_entry
0.40% stap [kernel.vmlinux] [k] update_load_avg
0.40% stap [kernel.vmlinux] [k] __intel_pmu_disable_all
0.40% stap [kernel.vmlinux] [k] clear_page_erms
0.39% stap [kernel.vmlinux] [k] __mod_node_page_state
0.39% stap [kernel.vmlinux] [k] error_entry
0.39% stap [kernel.vmlinux] [k] sync_regs
0.38% stap [kernel.vmlinux] [k] __handle_mm_fault
0.38% stap stap [.] derive_probes
#
# (Tip: System-wide collection from all CPUs: perf record -a)
#
[root@quaco testsuite]#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: William Cohen <wcohen@redhat.com>
Link: https://lkml.kernel.org/n/tip-408hvumcnyn93a0auihnawew@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Just like 'perf trace' and 'perf script', should be useful for instance
to only consider samples after the initialization phase of some
workload.
The man page has some examples and considerations about its current
interface, that still doesn't handle the on/off events in a special way,
behaving just like when multiple events are specified, i.e.:
- In non-group mode (when the event list is not enclosed in {}) show a
a menu to allow choosing which event the user wants to see in the
histograms browser
- In group mode, be it using {} or asking for --group, show one column
per event.
Try for instance:
# perf top -e '{cycles,instructions,probe:icmp_rcv}' --switch-on=probe:icmp_rcv
Replace probe:icmp_rcv, that I put in place using:
# perf probe icmp_rcv:59
To hit when broadcast packets arrive, with a probe installed after an
initialization phase is over or after some other point of interest, some
garbage collection, etc, and also use --switch-off, for instance, on a
probe installed after said garbage collection is over.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: William Cohen <wcohen@redhat.com>
Link: https://lkml.kernel.org/n/tip-c7q7qjeqtyvc9mkeipxza6ne@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Just like with 'perf script':
# perf trace -e sched:*,syscalls:*sleep* sleep 1
0.000 :28345/28345 sched:sched_waking:comm=perf pid=28346 prio=120 target_cpu=005
0.005 :28345/28345 sched:sched_wakeup:perf:28346 [120] success=1 CPU:005
0.383 sleep/28346 sched:sched_process_exec:filename=/usr/bin/sleep pid=28346 old_pid=28346
0.613 sleep/28346 sched:sched_stat_runtime:comm=sleep pid=28346 runtime=607375 [ns] vruntime=23289041218 [ns]
0.689 sleep/28346 syscalls:sys_enter_nanosleep:rqtp: 0x7ffc491789b0
0.693 sleep/28346 sched:sched_stat_runtime:comm=sleep pid=28346 runtime=72021 [ns] vruntime=23289113239 [ns]
0.694 sleep/28346 sched:sched_switch:sleep:28346 [120] S ==> swapper/5:0 [120]
1000.787 :0/0 sched:sched_waking:comm=sleep pid=28346 prio=120 target_cpu=005
1000.824 :0/0 sched:sched_wakeup:sleep:28346 [120] success=1 CPU:005
1000.908 sleep/28346 syscalls:sys_exit_nanosleep:0x0
1001.218 sleep/28346 sched:sched_process_exit:comm=sleep pid=28346 prio=120
# perf trace -e sched:*,syscalls:*sleep* --switch-on=syscalls:sys_enter_nanosleep sleep 1
0.000 sleep/28349 sched:sched_stat_runtime:comm=sleep pid=28349 runtime=603036 [ns] vruntime=23873537697 [ns]
0.001 sleep/28349 sched:sched_switch:sleep:28349 [120] S ==> swapper/4:0 [120]
1000.392 :0/0 sched:sched_waking:comm=sleep pid=28349 prio=120 target_cpu=004
1000.443 :0/0 sched:sched_wakeup:sleep:28349 [120] success=1 CPU:004
1000.540 sleep/28349 syscalls:sys_exit_nanosleep:0x0
1000.852 sleep/28349 sched:sched_process_exit:comm=sleep pid=28349 prio=120
# perf trace -e sched:*,syscalls:*sleep* --switch-on=syscalls:sys_enter_nanosleep --switch-off=syscalls:sys_exit_nanosleep sleep 1
0.000 sleep/28352 sched:sched_stat_runtime:comm=sleep pid=28352 runtime=610543 [ns] vruntime=24811686681 [ns]
0.001 sleep/28352 sched:sched_switch:sleep:28352 [120] S ==> swapper/0:0 [120]
1000.397 :0/0 sched:sched_waking:comm=sleep pid=28352 prio=120 target_cpu=000
1000.440 :0/0 sched:sched_wakeup:sleep:28352 [120] success=1 CPU:000
#
# perf trace -e sched:*,syscalls:*sleep* --switch-on=syscalls:sys_enter_nanosleep --switch-off=syscalls:sys_exit_nanosleep --show-on-off sleep 1
0.000 sleep/28367 syscalls:sys_enter_nanosleep:rqtp: 0x7fffd1a25fc0
0.004 sleep/28367 sched:sched_stat_runtime:comm=sleep pid=28367 runtime=628760 [ns] vruntime=22170052672 [ns]
0.005 sleep/28367 sched:sched_switch:sleep:28367 [120] S ==> swapper/2:0 [120]
1000.367 :0/0 sched:sched_waking:comm=sleep pid=28367 prio=120 target_cpu=002
1000.412 :0/0 sched:sched_wakeup:sleep:28367 [120] success=1 CPU:002
1000.512 sleep/28367 syscalls:sys_exit_nanosleep:0x0
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: William Cohen <wcohen@redhat.com>
Link: https://lkml.kernel.org/n/tip-t3ngpt1brcc1fm9gep9gxm4q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Counterpart of --switch-on:
# perf record -e sched:*,syscalls:sys_*_nanosleep sleep 1
[ perf record: Woken up 36 times to write data ]
[ perf record: Captured and wrote 0.032 MB perf.data (10 samples) ]
#
# perf script
:20918 20918 [002] 109866.143696: sched:sched_waking: comm=perf pid=20919 prio=120 target_cpu=001
:20918 20918 [002] 109866.143702: sched:sched_wakeup: perf:20919 [120] success=1 CPU:001
sleep 20919 [001] 109866.144081: sched:sched_process_exec: filename=/usr/bin/sleep pid=20919 old_pid=20919
sleep 20919 [001] 109866.144408: syscalls:sys_enter_nanosleep: rqtp: 0x7ffc2384fef0, rmtp: 0x00000000
sleep 20919 [001] 109866.144411: sched:sched_stat_runtime: comm=sleep pid=20919 runtime=521249 [ns] vruntime=202919398131 [n>
sleep 20919 [001] 109866.144412: sched:sched_switch: sleep:20919 [120] S ==> swapper/1:0 [120]
swapper 0 [001] 109867.144568: sched:sched_waking: comm=sleep pid=20919 prio=120 target_cpu=001
swapper 0 [001] 109867.144586: sched:sched_wakeup: sleep:20919 [120] success=1 CPU:001
sleep 20919 [001] 109867.144614: syscalls:sys_exit_nanosleep: 0x0
sleep 20919 [001] 109867.144753: sched:sched_process_exit: comm=sleep pid=20919 prio=120
#
# perf script --switch-off syscalls:sys_exit_nanosleep
:20918 20918 [002] 109866.143696: sched:sched_waking: comm=perf pid=20919 prio=120 target_cpu=001
:20918 20918 [002] 109866.143702: sched:sched_wakeup: perf:20919 [120] success=1 CPU:001
sleep 20919 [001] 109866.144081: sched:sched_process_exec: filename=/usr/bin/sleep pid=20919 old_pid=20919
sleep 20919 [001] 109866.144408: syscalls:sys_enter_nanosleep: rqtp: 0x7ffc2384fef0, rmtp: 0x00000000
sleep 20919 [001] 109866.144411: sched:sched_stat_runtime: comm=sleep pid=20919 runtime=521249 [ns] vruntime=202919398131 [n>
sleep 20919 [001] 109866.144412: sched:sched_switch: sleep:20919 [120] S ==> swapper/1:0 [120]
swapper 0 [001] 109867.144568: sched:sched_waking: comm=sleep pid=20919 prio=120 target_cpu=001
swapper 0 [001] 109867.144586: sched:sched_wakeup: sleep:20919 [120] success=1 CPU:001
sleep 20919 [001] 109867.144753: sched:sched_process_exit: comm=sleep pid=20919 prio=120
#
# perf script --switch-on syscalls:sys_enter_nanosleep --switch-off syscalls:sys_exit_nanosleep
sleep 20919 [001] 109866.144411: sched:sched_stat_runtime: comm=sleep pid=20919 runtime=521249 [ns] vruntime=202919398131 [n>
sleep 20919 [001] 109866.144412: sched:sched_switch: sleep:20919 [120] S ==> swapper/1:0 [120]
swapper 0 [001] 109867.144568: sched:sched_waking: comm=sleep pid=20919 prio=120 target_cpu=001
swapper 0 [001] 109867.144586: sched:sched_wakeup: sleep:20919 [120] success=1 CPU:001
#
# perf script --switch-on syscalls:sys_enter_nanosleep --switch-off syscalls:sys_exit_nanosleep --show-on-off
sleep 20919 [001] 109866.144408: syscalls:sys_enter_nanosleep: rqtp: 0x7ffc2384fef0, rmtp: 0x00000000
sleep 20919 [001] 109866.144411: sched:sched_stat_runtime: comm=sleep pid=20919 runtime=521249 [ns] vruntime=202919398131 [n>
sleep 20919 [001] 109866.144412: sched:sched_switch: sleep:20919 [120] S ==> swapper/1:0 [120]
swapper 0 [001] 109867.144568: sched:sched_waking: comm=sleep pid=20919 prio=120 target_cpu=001
swapper 0 [001] 109867.144586: sched:sched_wakeup: sleep:20919 [120] success=1 CPU:001
sleep 20919 [001] 109867.144614: syscalls:sys_exit_nanosleep: 0x0
#
Now think about using this together with 'perf probe' to create custom on/off
events in your app :-)
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: William Cohen <wcohen@redhat.com>
Link: https://lkml.kernel.org/n/tip-li3j01c4tmj9kw6ydsl8swej@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
One may want to see the --switch-on event as well, allow for that, using
the previous cset example:
# perf script --switch-on syscalls:sys_enter_nanosleep --show-on-off
sleep 13638 [001] 108237.582286: syscalls:sys_enter_nanosleep: rqtp: 0x7fff1948ac40, rmtp: 0x00000000
sleep 13638 [001] 108237.582289: sched:sched_stat_runtime: comm=sleep pid=13638 runtime=578104 [ns] vruntime=202889459556 [ns]
sleep 13638 [001] 108237.582291: sched:sched_switch: sleep:13638 [120] S ==> swapper/1:0 [120]
swapper 0 [001] 108238.582428: sched:sched_waking: comm=sleep pid=13638 prio=120 target_cpu=001
swapper 0 [001] 108238.582458: sched:sched_wakeup: sleep:13638 [120] success=1 CPU:001
sleep 13638 [001] 108238.582698: sched:sched_stat_runtime: comm=sleep pid=13638 runtime=173915 [ns] vruntime=202889633471 [ns]
sleep 13638 [001] 108238.582782: sched:sched_process_exit: comm=sleep pid=13638 prio=120
#
# perf script --switch-on syscalls:sys_enter_nanosleep
sleep 13638 [001] 108237.582289: sched:sched_stat_runtime: comm=sleep pid=13638 runtime=578104 [ns] vruntime=202889459556 [ns]
sleep 13638 [001] 108237.582291: sched:sched_switch: sleep:13638 [120] S ==> swapper/1:0 [120]
swapper 0 [001] 108238.582428: sched:sched_waking: comm=sleep pid=13638 prio=120 target_cpu=001
swapper 0 [001] 108238.582458: sched:sched_wakeup: sleep:13638 [120] success=1 CPU:001
sleep 13638 [001] 108238.582698: sched:sched_stat_runtime: comm=sleep pid=13638 runtime=173915 [ns] vruntime=202889633471 [ns]
sleep 13638 [001] 108238.582782: sched:sched_process_exit: comm=sleep pid=13638 prio=120
#
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: William Cohen <wcohen@redhat.com>
Cc: Florian Weimer <fweimer@redhat.com>
Link: https://lkml.kernel.org/n/tip-0omwwoywj1v63gu8cz0tr0cy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Sometime we want to only consider events after something happens, so
allow discarding events till such events is found, e.g.:
Record all scheduler tracepoints and the sys_enter_nanosleep syscall
event for the 'sleep 1' workload:
# perf record -e sched:*,syscalls:sys_enter_nanosleep sleep 1
[ perf record: Woken up 31 times to write data ]
[ perf record: Captured and wrote 0.032 MB perf.data (10 samples) ]
#
So we have these events in the generated perf data file:
# perf evlist
sched:sched_kthread_stop
sched:sched_kthread_stop_ret
sched:sched_waking
sched:sched_wakeup
sched:sched_wakeup_new
sched:sched_switch
sched:sched_migrate_task
sched:sched_process_free
sched:sched_process_exit
sched:sched_wait_task
sched:sched_process_wait
sched:sched_process_fork
sched:sched_process_exec
sched:sched_stat_wait
sched:sched_stat_sleep
sched:sched_stat_iowait
sched:sched_stat_blocked
sched:sched_stat_runtime
sched:sched_pi_setprio
sched:sched_move_numa
sched:sched_stick_numa
sched:sched_swap_numa
sched:sched_wake_idle_without_ipi
syscalls:sys_enter_nanosleep
# Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events
#
Then show all of the events that actually took place in this 'perf record' session:
# perf script
:13637 13637 [002] 108237.581529: sched:sched_waking: comm=perf pid=13638 prio=120 target_cpu=001
:13637 13637 [002] 108237.581537: sched:sched_wakeup: perf:13638 [120] success=1 CPU:001
sleep 13638 [001] 108237.581992: sched:sched_process_exec: filename=/usr/bin/sleep pid=13638 old_pid=13638
sleep 13638 [001] 108237.582286: syscalls:sys_enter_nanosleep: rqtp: 0x7fff1948ac40, rmtp: 0x00000000
sleep 13638 [001] 108237.582289: sched:sched_stat_runtime: comm=sleep pid=13638 runtime=578104 [ns] vruntime=202889459556 [ns]
sleep 13638 [001] 108237.582291: sched:sched_switch: sleep:13638 [120] S ==> swapper/1:0 [120]
swapper 0 [001] 108238.582428: sched:sched_waking: comm=sleep pid=13638 prio=120 target_cpu=001
swapper 0 [001] 108238.582458: sched:sched_wakeup: sleep:13638 [120] success=1 CPU:001
sleep 13638 [001] 108238.582698: sched:sched_stat_runtime: comm=sleep pid=13638 runtime=173915 [ns] vruntime=202889633471 [ns]
sleep 13638 [001] 108238.582782: sched:sched_process_exit: comm=sleep pid=13638 prio=120
#
Now lets see only the ones that took place after a certain "marker":
# perf script --switch-on syscalls:sys_enter_nanosleep
sleep 13638 [001] 108237.582289: sched:sched_stat_runtime: comm=sleep pid=13638 runtime=578104 [ns] vruntime=202889459556 [ns]
sleep 13638 [001] 108237.582291: sched:sched_switch: sleep:13638 [120] S ==> swapper/1:0 [120]
swapper 0 [001] 108238.582428: sched:sched_waking: comm=sleep pid=13638 prio=120 target_cpu=001
swapper 0 [001] 108238.582458: sched:sched_wakeup: sleep:13638 [120] success=1 CPU:001
sleep 13638 [001] 108238.582698: sched:sched_stat_runtime: comm=sleep pid=13638 runtime=173915 [ns] vruntime=202889633471 [ns]
sleep 13638 [001] 108238.582782: sched:sched_process_exit: comm=sleep pid=13638 prio=120
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: William Cohen <wcohen@redhat.com>
Link: https://lkml.kernel.org/n/tip-f1oo0ufdhrkx6nhy2lj1ierm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The perf.data file format documentation for HEADER_SAMPLE_TOPOLOGY
specifies the layout in a confusing manner that doesn't match the rest
of the document. This patch attempts to describe things consistent with
the rest of the file.
Signed-off-by: Vince Weaver <vincent.weaver@maine.edu>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Chong Jiang <chongjiang@chromium.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1908011425240.14303@macbook-air
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Document how to select PEBS via Intel PT and how to display synthesized
PEBS samples.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190806084606.4021-8-alexander.shishkin@linux.intel.com
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
[ Update the example to use a group with intel_pt// as the group leader, as per Alex comment ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Expose the aux_output attribute flag to the user to configure, by adding a
config term 'aux-output'. For events that support it, selection of
'aux-output' causes the generation of AUX records instead of event records.
This requires that an AUX area event is also provided.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190806084606.4021-7-alexander.shishkin@linux.intel.com
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add itrace option 'o' to synthesize events recorded in the AUX area due
to the use of perf record's aux-output config term.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190806084606.4021-5-alexander.shishkin@linux.intel.com
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It is sometimes useful to generate a snapshot when perf record exits;
I've been using a wrapper script around the workload that would do a
killall -USR2 perf when the workload exits.
This patch makes it easier and also works when perf record is attached
to a pre-existing task. A new snapshot option 'e' can be specified in
-S to enable this behavior:
root@elsewhere:~# perf record -e intel_pt// -Se sleep 1
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.085 MB perf.data ]
Co-developed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190806144101.62892-1-alexander.shishkin@linux.intel.com
[ Fixed up !HAVE_AUXTRACE_SUPPORT build in builtin-record.c, adding 2 missing __maybe_unused ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
There was a provision for setting this variable, but not the
getenv("PERF_CONFIG") call to set it, as this was fixed in the previous
cset, document that it can be used to ask for using an alternative
.perfconfig file or to disable reading whatever file exists in the
system or home directory, i.e. using:
export PERF_CONFIG=/dev/null
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: https://lkml.kernel.org/n/tip-0u4o967hsk7j0o50zp9ctn89@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch fix a spelling typo in a variable name in the Documentation Makefile.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190801032812.25018-1-standby24x7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The perf.data-file-format documentation incorrectly says the
HEADER_TOTAL_MEM results are in bytes. The results are in kilobytes
(perf reads the value from /proc/meminfo)
Signed-off-by: Vince Weaver <vincent.weaver@maine.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1907251155500.22624@macbook-air
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
perf.data:
Alexey Budankov:
- Fix loading of compressed data split across adjacent records
Jiri Olsa:
- Fix buffer size setting for processing CPU topology perf.data header.
perf stat:
Jiri Olsa:
- Fix segfault for event group in repeat mode
Cong Wang:
- Always separate "stalled cycles per insn" line, it was being appended to
the "instructions" line.
perf script:
Andi Kleen:
- Fix --max-blocks man page description.
- Improve man page description of metrics.
- Fix off by one in brstackinsn IPC computation.
perf probe:
Arnaldo Carvalho de Melo:
- Avoid calling freeing routine multiple times for same pointer.
perf build:
- Do not use -Wshadow on gcc < 4.8, avoiding too strict warnings
treated as errors, breaking the build.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Clarify that a metric is based on events, not referring to itself. Also
some improvements with the sentences.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20190711181922.18765-3-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The --max-blocks description was using the old name brstackasm. Use
brstackinsn instead.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20190711181922.18765-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"The main changes in this release include:
- Add user space specific memory reading for kprobes
- Allow kprobes to be executed earlier in boot
The rest are mostly just various clean ups and small fixes"
* tag 'trace-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (33 commits)
tracing: Make trace_get_fields() global
tracing: Let filter_assign_type() detect FILTER_PTR_STRING
tracing: Pass type into tracing_generic_entry_update()
ftrace/selftest: Test if set_event/ftrace_pid exists before writing
ftrace/selftests: Return the skip code when tracing directory not configured in kernel
tracing/kprobe: Check registered state using kprobe
tracing/probe: Add trace_event_call accesses APIs
tracing/probe: Add probe event name and group name accesses APIs
tracing/probe: Add trace flag access APIs for trace_probe
tracing/probe: Add trace_event_file access APIs for trace_probe
tracing/probe: Add trace_event_call register API for trace_probe
tracing/probe: Add trace_probe init and free functions
tracing/uprobe: Set print format when parsing command
tracing/kprobe: Set print format right after parsed command
kprobes: Fix to init kprobes in subsys_initcall
tracepoint: Use struct_size() in kmalloc()
ring-buffer: Remove HAVE_64BIT_ALIGNED_ACCESS
ftrace: Enable trampoline when rec count returns back to one
tracing/kprobe: Do not run kprobe boot tests if kprobe_event is on cmdline
tracing: Make a separate config for trace event self tests
...
|
|
- Fix a typo in the man page
- Fix a tip that doesn't make any sense.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20190628220900.13741-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Documentation the new computation selection 'cycles'.
v4:
---
Change the column 'Block cycles diff [start:end]' to
'[Program Block Range] Cycles Diff'
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1561713784-30533-8-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently only a single explicit time range is accepted. Add support for
multiple ranges separated by spaces, which requires the string to be
quoted. Update the time utils test accordingly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190604130017.31207-20-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Correct some punctuation and spelling and correct the format to show
that the time resolution is nanoseconds not microseconds.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190604130017.31207-16-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The clang bpf cmdline template has defined default value in the file
tools/perf/util/llvm-utils.c, which has been changed for several times.
This patch updates the documentation to reflect the latest default value
for the configuration llvm.clang-bpf-cmd-template.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Drayton <mbd@fb.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Fixes: d35b168c3dcd ("perf bpf: Give precedence to bpf header dir")
Fixes: cb76371441d0 ("perf llvm: Allow passing options to llc in addition to clang")
Fixes: 1b16fffa389d ("perf llvm-utils: Add bpf include path to clang command line")
Link: http://lkml.kernel.org/r/20190607143508.18141-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The 'die' info isn't in the same array as core and socket ids, and we
missed the 'dies' string list, that comes right after the 'core' +
'socket' id variable length array, followed by the VLA for the dies.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: c9cb12c5ba08 ("perf header: Add die information in CPU topology")
Link: https://lkml.kernel.org/n/tip-nubi6mxp2n8ofvlx7ph6k3h6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The "sibling cores" actually shows the sibling CPUs of a socket. The
name "sibling cores" is very misleading.
Rename "sibling cores" to "sibling sockets"
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1559688644-106558-4-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It is useful to aggregate counts per die. E.g. Uncore becomes die-scope
on Xeon Cascade Lake-AP.
Introduce a new option "--per-die" to support per-die aggregation.
The global id for each core has been changed to socket + die id + core
id. The global id for each die is socket + die id.
Add die information for per-core aggregation. The output of per-core
aggregation will be changed from "S0-C0" to "S0-D0-C0". Any scripts
which rely on the output format of per-core aggregation probably be
broken.
For 'perf stat record/report', there is no die information when
processing the old perf.data. The per-die result will be the same as
per-socket.
Committer notes:
Renamed 'die' variable to 'die_id' to fix the build in some systems:
CC /tmp/build/perf/builtin-script.o
cc1: warnings being treated as errors
builtin-stat.c: In function 'perf_env__get_die':
builtin-stat.c:963: error: declaration of 'die' shadows a global declaration
util/util.h:19: error: shadowed declaration is here
mv: cannot stat `/tmp/build/perf/.builtin-stat.o.tmp': No such file or directory
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/n/tip-bsnhx7vgsuu6ei307mw60mbj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
With the new CPUID.1F, a new level type of CPU topology, 'die', is
introduced. The 'die' information in CPU topology should be added in
perf header.
To be compatible with old perf.data, the patch checks the section size
before reading the die information. The new info is added at the end of
the cpu_topology section, the old perf tool ignores the extra data. It
never reads data crossing the section boundary.
The new perf tool with the patch can be used on legacy kernel. Add a new
function has_die_topology() to check if die topology information is
supported by kernel. The function only check X86 and CPU 0. Assuming
other CPUs have same topology.
Use similar method for core and socket to support die id and sibling
dies string.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1559688644-106558-2-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
One can just record callchains in the kernel or user space with this new
options.
We can use it together with "--all-kernel" options.
This two options is used just like print_stack(sys) or print_ustack(usr)
for systemtap.
Shown below is the usage of this new option combined with "--all-kernel"
options:
1. Configure all used events to run in kernel space and just collect
kernel callchains.
$ perf record -a -g --all-kernel --kernel-callchains
2. Configure all used events to run in kernel space and just collect
user callchains.
$ perf record -a -g --all-kernel --user-callchains
Committer notes:
Improved documentation to state that asking for kernel callchains really
is asking for excluding user callchains, and vice versa.
Further mentioned that using both won't get both, but nothing, as both
will be excluded.
Signed-off-by: yuzhoujian <yuzhoujian@didichuxing.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1559222962-22891-1-git-send-email-ufo19890607@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add brief documentation to explain how the database export maintains
backward and forward compatibility.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190520113728.14389-15-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add brief documentation about instructions-per-cycle (IPC) information
derived from Intel PT.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190520113728.14389-13-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add field 'ipc' to display instructions-per-cycle.
Example:
perf record -e intel_pt/cyc/u ls
perf script --insn-trace --xed -F+ipc,-dso,-cpu,-tid
ls 2670177.697113434: 7f0dfdbcd090 _start+0x0 mov %rsp, %rdi IPC: 0.00 (1/877)
ls 2670177.697113434: 7f0dfdbcd093 _start+0x3 callq 0x7f0dfdbce030
ls 2670177.697113434: 7f0dfdbce030 _dl_start+0x0 pushq %rbp
ls 2670177.697113434: 7f0dfdbce031 _dl_start+0x1 mov %rsp, %rbp
ls 2670177.697113434: 7f0dfdbce034 _dl_start+0x4 pushq %r15
ls 2670177.697113434: 7f0dfdbce036 _dl_start+0x6 pushq %r14
ls 2670177.697113434: 7f0dfdbce038 _dl_start+0x8 pushq %r13
ls 2670177.697113434: 7f0dfdbce03a _dl_start+0xa pushq %r12
ls 2670177.697113434: 7f0dfdbce03c _dl_start+0xc mov %rdi, %r12
ls 2670177.697113434: 7f0dfdbce03f _dl_start+0xf pushq %rbx
ls 2670177.697113434: 7f0dfdbce040 _dl_start+0x10 sub $0x38, %rsp
ls 2670177.697113434: 7f0dfdbce044 _dl_start+0x14 rdtsc
ls 2670177.697113434: 7f0dfdbce046 _dl_start+0x16 mov %eax, %eax
ls 2670177.697113434: 7f0dfdbce048 _dl_start+0x18 shl $0x20, %rdx
ls 2670177.697113434: 7f0dfdbce04c _dl_start+0x1c or %rax, %rdx
ls 2670177.697114471: 7f0dfdbce04f _dl_start+0x1f movq 0x27e22(%rip), %rax IPC: 0.00 (15/1685)
ls 2670177.697116177: 7f0dfdbce056 _dl_start+0x26 movq %rdx, 0x27683(%rip) IPC: 0.00 (1/881)
Note, the IPC values are low due to page faults at the beginning of
execution. The additional cycles are due to the time to enter the
kernel, not the actual kernel page fault handler.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190520113728.14389-9-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We forgot to update the perf.data file format document for the
HEADER_DIR_FORMAT header, do it now from comments in the patch
introducing it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Chong Jiang <chongjiang@chromium.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Fixes: 258031c017c3 ("perf header: Add DIR_FORMAT feature to describe directory data")
Link: https://lkml.kernel.org/n/tip-jbrzb7ijb5al33gi8br6f9rr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We forgot to update the perf.data file format document for the
HEADER_CLOCKID header, do it now from comments in the patch introducing
it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Chong Jiang <chongjiang@chromium.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Fixes: cf7905165fee ("perf record: Encode -k clockid frequency into Perf trace")
Link: https://lkml.kernel.org/n/tip-slhnjp06027j3ae17qqetzxj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|