summaryrefslogtreecommitdiffstats
path: root/tools/objtool
AgeCommit message (Collapse)AuthorFilesLines
2020-05-10Merge tag 'x86-urgent-2020-05-10' of ↵Linus Torvalds2-4/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of fixes for x86: - Ensure that direct mapping alias is always flushed when changing page attributes. The optimization for small ranges failed to do so when the virtual address was in the vmalloc or module space. - Unbreak the trace event registration for syscalls without arguments caused by the refactoring of the SYSCALL_DEFINE0() macro. - Move the printk in the TSC deadline timer code to a place where it is guaranteed to only be called once during boot and cannot be rearmed by clearing warn_once after boot. If it's invoked post boot then lockdep rightfully complains about a potential deadlock as the calling context is different. - A series of fixes for objtool and the ORC unwinder addressing variety of small issues: - Stack offset tracking for indirect CFAs in objtool ignored subsequent pushs and pops - Repair the unwind hints in the register clearing entry ASM code - Make the unwinding in the low level exit to usermode code stop after switching to the trampoline stack. The unwind hint is no longer valid and the ORC unwinder emits a warning as it can't find the registers anymore. - Fix unwind hints in switch_to_asm() and rewind_stack_do_exit() which caused objtool to generate bogus ORC data. - Prevent unwinder warnings when dumping the stack of a non-current task as there is no way to be sure about the validity because the dumped stack can be a moving target. - Make the ORC unwinder behave the same way as the frame pointer unwinder when dumping an inactive tasks stack and do not skip the first frame. - Prevent ORC unwinding before ORC data has been initialized - Immediately terminate unwinding when a unknown ORC entry type is found. - Prevent premature stop of the unwinder caused by IRET frames. - Fix another infinite loop in objtool caused by a negative offset which was not catched. - Address a few build warnings in the ORC unwinder and add missing static/ro_after_init annotations" * tag 'x86-urgent-2020-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/unwind/orc: Move ORC sorting variables under !CONFIG_MODULES x86/apic: Move TSC deadline timer debug printk ftrace/x86: Fix trace event registration for syscalls without arguments x86/mm/cpa: Flush direct map alias during cpa objtool: Fix infinite loop in for_offset_range() x86/unwind/orc: Fix premature unwind stoppage due to IRET frames x86/unwind/orc: Fix error path for bad ORC entry type x86/unwind/orc: Prevent unwinding before ORC initialization x86/unwind/orc: Don't skip the first frame for inactive tasks x86/unwind: Prevent false warnings for non-current tasks x86/unwind/orc: Convert global variables to static x86/entry/64: Fix unwind hints in rewind_stack_do_exit() x86/entry/64: Fix unwind hints in __switch_to_asm() x86/entry/64: Fix unwind hints in kernel exit path x86/entry/64: Fix unwind hints in register clearing code objtool: Fix stack offset tracking for indirect CFAs
2020-05-07objtool: Fix infinite loop in find_jump_table()Josh Poimboeuf1-2/+13
Kristen found a hang in objtool when building with -ffunction-sections. It was caused by evergreen_pcie_gen2_enable.cold() being laid out immediately before evergreen_pcie_gen2_enable(). Since their "pfunc" is always the same, find_jump_table() got into an infinite loop because it didn't recognize the boundary between the two functions. Fix that with a new prev_insn_same_sym() helper, which doesn't cross subfunction boundaries. Reported-by: Kristen Carlson Accardi <kristen@linux.intel.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/378b51c9d9c894dc3294bc460b4b0869e950b7c5.1588110291.git.jpoimboe@redhat.com
2020-04-26objtool: Fix infinite loop in for_offset_range()Josh Poimboeuf1-3/+4
Randy reported that objtool got stuck in an infinite loop when processing drivers/i2c/busses/i2c-parport.o. It was caused by the following code: 00000000000001fd <line_set>: 1fd: 48 b8 00 00 00 00 00 movabs $0x0,%rax 204: 00 00 00 1ff: R_X86_64_64 .rodata-0x8 207: 41 55 push %r13 209: 41 89 f5 mov %esi,%r13d 20c: 41 54 push %r12 20e: 49 89 fc mov %rdi,%r12 211: 55 push %rbp 212: 48 89 d5 mov %rdx,%rbp 215: 53 push %rbx 216: 0f b6 5a 01 movzbl 0x1(%rdx),%ebx 21a: 48 8d 34 dd 00 00 00 lea 0x0(,%rbx,8),%rsi 221: 00 21e: R_X86_64_32S .rodata 222: 48 89 f1 mov %rsi,%rcx 225: 48 29 c1 sub %rax,%rcx find_jump_table() saw the .rodata reference and tried to find a jump table associated with it (though there wasn't one). The -0x8 rela addend is unusual. It caused find_jump_table() to send a negative table_offset (unsigned 0xfffffffffffffff8) to find_rela_by_dest(). The negative offset should have been harmless, but it actually threw for_offset_range() for a loop... literally. When the mask value got incremented past the end value, it also wrapped to zero, causing the loop exit condition to remain true forever. Prevent this scenario from happening by ensuring the incremented value is always >= the starting value. Fixes: 74b873e49d92 ("objtool: Optimize find_rela_by_dest_range()") Reported-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Julien Thierry <jthierry@redhat.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/02b719674b031800b61e33c30b2e823183627c19.1587842122.git.jpoimboe@redhat.com
2020-04-25objtool: Fix stack offset tracking for indirect CFAsJosh Poimboeuf1-1/+1
When the current frame address (CFA) is stored on the stack (i.e., cfa->base == CFI_SP_INDIRECT), objtool neglects to adjust the stack offset when there are subsequent pushes or pops. This results in bad ORC data at the end of the ENTER_IRQ_STACK macro, when it puts the previous stack pointer on the stack and does a subsequent push. This fixes the following unwinder warning: WARNING: can't dereference registers at 00000000f0a6bdba for ip interrupt_entry+0x9f/0xa0 Fixes: 627fce14809b ("objtool: Add ORC unwind table generation") Reported-by: Vince Weaver <vincent.weaver@maine.edu> Reported-by: Dave Jones <dsj@fb.com> Reported-by: Steven Rostedt <rostedt@goodmis.org> Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Reported-by: Joe Mario <jmario@redhat.com> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Jann Horn <jannh@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/853d5d691b29e250333332f09b8e27410b2d9924.1587808742.git.jpoimboe@redhat.com
2020-04-22objtool: Fix off-by-one in symbol_by_offset()Julien Thierry1-1/+1
Sometimes, WARN_FUNC() and other users of symbol_by_offset() will associate the first instruction of a symbol with the symbol preceding it. This is because symbol->offset + symbol->len is already outside of the symbol's range. Fixes: 2a362ecc3ec9 ("objtool: Optimize find_symbol_*() and read_symbols()") Signed-off-by: Julien Thierry <jthierry@redhat.com> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
2020-04-22objtool: Fix 32bit cross buildsPeter Zijlstra1-1/+1
Apparently there's people doing 64bit builds on 32bit machines. Fixes: 74b873e49d92 ("objtool: Optimize find_rela_by_dest_range()") Reported-by: youling257@gmail.com Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2020-04-14objtool: Make BP scratch register warning more robustJosh Poimboeuf1-2/+2
If func is NULL, a seg fault can result. This is a theoretical issue which was found by Coverity, ID: 1492002 ("Dereference after null check"). Fixes: c705cecc8431 ("objtool: Track original function across branches") Reported-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/afc628693a37acd287e843bcc5c0430263d93c74.1585761021.git.jpoimboe@redhat.com
2020-04-14objtool: Fix switch table detection in .text.unlikelyJosh Poimboeuf1-4/+1
If a switch jump table's indirect branch is in a ".cold" subfunction in .text.unlikely, objtool doesn't detect it, and instead prints a false warning: drivers/media/v4l2-core/v4l2-ioctl.o: warning: objtool: v4l_print_format.cold()+0xd6: sibling call from callable instruction with modified stack frame drivers/hwmon/max6650.o: warning: objtool: max6650_probe.cold()+0xa5: sibling call from callable instruction with modified stack frame drivers/media/dvb-frontends/drxk_hard.o: warning: objtool: init_drxk.cold()+0x16f: sibling call from callable instruction with modified stack frame Fix it by comparing the function, instead of the section and offset. Fixes: 13810435b9a7 ("objtool: Support GCC 8's cold subfunctions") Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/157c35d42ca9b6354bbb1604fe9ad7d1153ccb21.1585761021.git.jpoimboe@redhat.com
2020-04-14objtool: Support Clang non-section symbols in ORC generationJosh Poimboeuf1-7/+26
When compiling the kernel with AS=clang, objtool produces a lot of warnings: warning: objtool: missing symbol for section .text warning: objtool: missing symbol for section .init.text warning: objtool: missing symbol for section .ref.text It then fails to generate the ORC table. The problem is that objtool assumes text section symbols always exist. But the Clang assembler is aggressive about removing them. When generating relocations for the ORC table, objtool always tries to reference instructions by their section symbol offset. If the section symbol doesn't exist, it bails. Do a fallback: when a section symbol isn't available, reference a function symbol instead. Reported-by: Dmitry Golovin <dima@golovin.in> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://github.com/ClangBuiltLinux/linux/issues/669 Link: https://lkml.kernel.org/r/9a9cae7fcf628843aabe5a086b1a3c5bf50f42e8.1585761021.git.jpoimboe@redhat.com
2020-04-14objtool: Support Clang non-section symbols in ORC dumpJosh Poimboeuf1-17/+27
Historically, the relocation symbols for ORC entries have only been section symbols: .text+0: sp:sp+8 bp:(und) type:call end:0 However, the Clang assembler is aggressive about stripping section symbols. In that case we will need to use function symbols: freezing_slow_path+0: sp:sp+8 bp:(und) type:call end:0 In preparation for the generation of such entries in "objtool orc generate", add support for reading them in "objtool orc dump". Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/b811b5eb1a42602c3b523576dc5efab9ad1c174d.1585761021.git.jpoimboe@redhat.com
2020-04-14objtool: Fix CONFIG_UBSAN_TRAP unreachable warningsJosh Poimboeuf1-2/+15
CONFIG_UBSAN_TRAP causes GCC to emit a UD2 whenever it encounters an unreachable code path. This includes __builtin_unreachable(). Because the BUG() macro uses __builtin_unreachable() after it emits its own UD2, this results in a double UD2. In this case objtool rightfully detects that the second UD2 is unreachable: init/main.o: warning: objtool: repair_env_string()+0x1c8: unreachable instruction We weren't able to figure out a way to get rid of the double UD2s, so just silence the warning. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/6653ad73c6b59c049211bd7c11ed3809c20ee9f5.1585761021.git.jpoimboe@redhat.com
2020-04-09kbuild: support LLVM=1 to switch the default tools to Clang/LLVMMasahiro Yamada1-0/+6
As Documentation/kbuild/llvm.rst implies, building the kernel with a full set of LLVM tools gets very verbose and unwieldy. Provide a single switch LLVM=1 to use Clang and LLVM tools instead of GCC and Binutils. You can pass it from the command line or as an environment variable. Please note LLVM=1 does not turn on the integrated assembler. You need to pass LLVM_IAS=1 to use it. When the upstream kernel is ready for the integrated assembler, I think we can make it default. We discussed what we need, and we agreed to go with a simple boolean flag that switches both target and host tools: https://lkml.org/lkml/2020/3/28/494 https://lkml.org/lkml/2020/4/3/43 Some items discussed, but not adopted: - LLVM_DIR When multiple versions of LLVM are installed, I just thought supporting LLVM_DIR=/path/to/my/llvm/bin/ might be useful. CC = $(LLVM_DIR)clang LD = $(LLVM_DIR)ld.lld ... However, we can handle this by modifying PATH. So, we decided to not do this. - LLVM_SUFFIX Some distributions (e.g. Debian) package specific versions of LLVM with naming conventions that use the version as a suffix. CC = clang$(LLVM_SUFFIX) LD = ld.lld(LLVM_SUFFIX) ... will allow a user to pass LLVM_SUFFIX=-11 to use clang-11 etc., but the suffixed versions in /usr/bin/ are symlinks to binaries in /usr/lib/llvm-#/bin/, so this can also be handled by PATH. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com> # build Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
2020-04-03Merge tag 'spdx-5.7-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull SPDX updates from Greg KH: "Here are three SPDX patches for 5.7-rc1. One fixes up the SPDX tag for a single driver, while the other two go through the tree and add SPDX tags for all of the .gitignore files as needed. Nothing too complex, but you will get a merge conflict with your current tree, that should be trivial to handle (one file modified by two things, one file deleted.) All three of these have been in linux-next for a while, with no reported issues other than the merge conflict" * tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: ASoC: MT6660: make spdxcheck.py happy .gitignore: add SPDX License Identifier .gitignore: remove too obvious comments
2020-03-30Merge branch 'locking-core-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: "The main changes in this cycle were: - Continued user-access cleanups in the futex code. - percpu-rwsem rewrite that uses its own waitqueue and atomic_t instead of an embedded rwsem. This addresses a couple of weaknesses, but the primary motivation was complications on the -rt kernel. - Introduce raw lock nesting detection on lockdep (CONFIG_PROVE_RAW_LOCK_NESTING=y), document the raw_lock vs. normal lock differences. This too originates from -rt. - Reuse lockdep zapped chain_hlocks entries, to conserve RAM footprint on distro-ish kernels running into the "BUG: MAX_LOCKDEP_CHAIN_HLOCKS too low!" depletion of the lockdep chain-entries pool. - Misc cleanups, smaller fixes and enhancements - see the changelog for details" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits) fs/buffer: Make BH_Uptodate_Lock bit_spin_lock a regular spinlock_t thermal/x86_pkg_temp: Make pkg_temp_lock a raw_spinlock_t Documentation/locking/locktypes: Minor copy editor fixes Documentation/locking/locktypes: Further clarifications and wordsmithing m68knommu: Remove mm.h include from uaccess_no.h x86: get rid of user_atomic_cmpxchg_inatomic() generic arch_futex_atomic_op_inuser() doesn't need access_ok() x86: don't reload after cmpxchg in unsafe_atomic_op2() loop x86: convert arch_futex_atomic_op_inuser() to user_access_begin/user_access_end() objtool: whitelist __sanitizer_cov_trace_switch() [parisc, s390, sparc64] no need for access_ok() in futex handling sh: no need of access_ok() in arch_futex_atomic_op_inuser() futex: arch_futex_atomic_op_inuser() calling conventions change completion: Use lockdep_assert_RT_in_threaded_ctx() in complete_all() lockdep: Add posixtimer context tracing bits lockdep: Annotate irq_work lockdep: Add hrtimer context tracing bits lockdep: Introduce wait-type checks completion: Use simple wait queues sched/swait: Prepare usage in completions ...
2020-03-27objtool: whitelist __sanitizer_cov_trace_switch()Al Viro1-0/+1
it's not really different from e.g. __sanitizer_cov_trace_cmp4(); as it is, the switches that generate an array of labels get rejected by objtool, while slightly different set of cases that gets compiled into a series of comparisons is accepted. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-03-25objtool: Re-arrange validate_functions()Peter Zijlstra1-22/+30
In preparation to adding a vmlinux.o specific pass, rearrange some code. No functional changes intended. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lkml.kernel.org/r/20200324160924.924304616@infradead.org
2020-03-25objtool: Optimize find_rela_by_dest_range()Peter Zijlstra2-5/+26
Perf shows there is significant time in find_rela_by_dest(); this is because we have to iterate the address space per byte, looking for relocation entries. Optimize this by reducing the address space granularity. This reduces objtool on vmlinux.o runtime from 4.8 to 4.4 seconds. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lkml.kernel.org/r/20200324160924.861321325@infradead.org
2020-03-25objtool: Delete cleanup()Peter Zijlstra1-19/+0
Perf shows we spend a measurable amount of time spend cleaning up right before we exit anyway. Avoid the needsless work and just terminate. This reduces objtool on vmlinux.o runtime from 5.4s to 4.8s Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lkml.kernel.org/r/20200324160924.800720170@infradead.org
2020-03-25objtool: Optimize read_sections()Peter Zijlstra5-29/+47
Perf showed that __hash_init() is a significant portion of read_sections(), so instead of doing a per section rela_hash, use an elf-wide rela_hash. Statistics show us there are about 1.1 million relas, so size it accordingly. This reduces the objtool on vmlinux.o runtime to a third, from 15 to 5 seconds. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lkml.kernel.org/r/20200324160924.739153726@infradead.org
2020-03-25objtool: Optimize find_symbol_by_name()Peter Zijlstra2-5/+7
Perf showed that find_symbol_by_name() takes time; add a symbol name hash. This shaves another second off of objtool on vmlinux.o runtime, down to 15 seconds. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lkml.kernel.org/r/20200324160924.676865656@infradead.org
2020-03-25objtool: Resize insn_hashPeter Zijlstra1-1/+1
Perf shows we're spending a lot of time in find_insn() and the statistics show we have around 3.2 million instruction. Increase the hash table size to reduce the bucket load from around 50 to 3. This shaves about 2s off of objtool on vmlinux.o runtime, down to 16s. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lkml.kernel.org/r/20200324160924.617882545@infradead.org
2020-03-25objtool: Rename find_containing_func()Peter Zijlstra3-3/+3
For consistency; we have: find_symbol_by_offset() / find_symbol_containing() find_func_by_offset() / find_containing_func() fix that. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lkml.kernel.org/r/20200324160924.558470724@infradead.org
2020-03-25objtool: Optimize find_symbol_*() and read_symbols()Peter Zijlstra3-58/+144
All of: read_symbols(), find_symbol_by_offset(), find_symbol_containing(), find_containing_func() do a linear search of the symbols. Add an RB tree to make it go faster. This about halves objtool runtime on vmlinux.o, from 34s to 18s. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lkml.kernel.org/r/20200324160924.499016559@infradead.org
2020-03-25objtool: Optimize find_section_by_name()Peter Zijlstra2-1/+12
In order to avoid yet another linear search of (20k) sections, add a name based hash. This reduces objtool runtime on vmlinux.o by some 10s to around 35s. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lkml.kernel.org/r/20200324160924.440174280@infradead.org
2020-03-25objtool: Optimize find_section_by_index()Peter Zijlstra2-5/+10
In order to avoid a linear search (over 20k entries), add an section_hash to the elf object. This reduces objtool on vmlinux.o from a few minutes to around 45 seconds. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lkml.kernel.org/r/20200324160924.381249993@infradead.org
2020-03-25objtool: Add a statistics modePeter Zijlstra4-3/+25
Have it print a few numbers which can be used to size the hashtables. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lkml.kernel.org/r/20200324160924.321381240@infradead.org
2020-03-25objtool: Optimize find_symbol_by_index()Peter Zijlstra2-10/+6
The symbol index is object wide, not per section, so it makes no sense to have the symbol_hash be part of the section object. By moving it to the elf object we avoid the linear sections iteration. This reduces the runtime of objtool on vmlinux.o from over 3 hours (I gave up) to a few minutes. The defconfig vmlinux.o has around 20k sections. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lkml.kernel.org/r/20200324160924.261852348@infradead.org
2020-03-25objtool: Rename func_for_each_insn_all()Peter Zijlstra1-6/+6
Now that func_for_each_insn() is available, rename func_for_each_insn_all(). This gets us: sym_for_each_insn() - iterate on symbol offset/len func_for_each_insn() - iterate on insn->func Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lkml.kernel.org/r/20200324160924.083720147@infradead.org
2020-03-25objtool: Rename func_for_each_insn()Peter Zijlstra1-8/+8
There is func_for_each_insn() and func_for_each_insn_all(), the both iterate the instructions, but the first uses symbol offset/length while the second uses insn->func. Rename func_for_each_insn() to sym_for_eac_insn() because it iterates on symbol information. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lkml.kernel.org/r/20200324160924.024341229@infradead.org
2020-03-25objtool: Introduce validate_return()Peter Zijlstra1-28/+36
Trivial 'cleanup' to save one indentation level and match validate_call(). Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lkml.kernel.org/r/20200324160923.963996225@infradead.org
2020-03-25.gitignore: add SPDX License IdentifierMasahiro Yamada1-0/+1
Add SPDX License Identifier to all .gitignore files. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-21objtool: Improve call destination function detectionJosh Poimboeuf3-11/+31
A recent clang change, combined with a binutils bug, can trigger a situation where a ".Lprintk$local" STT_NOTYPE symbol gets created at the same offset as the "printk" STT_FUNC symbol. This confuses objtool: kernel/printk/printk.o: warning: objtool: ignore_loglevel_setup()+0x10: can't find call dest symbol at .text+0xc67 Improve the call destination detection by looking specifically for an STT_FUNC symbol. Reported-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Link: https://github.com/ClangBuiltLinux/linux/issues/872 Link: https://sourceware.org/bugzilla/show_bug.cgi?id=25551 Link: https://lkml.kernel.org/r/0a7ee320bc0ea4469bd3dc450a7b4725669e0ea9.1581997059.git.jpoimboe@redhat.com
2020-02-21objtool: Fix clang switch table edge caseJosh Poimboeuf1-2/+9
Clang has the ability to create a switch table which is not a jump table, but is rather a table of string pointers. This confuses objtool, because it sees the relocations for the string pointers and assumes they're part of a jump table: drivers/ata/sata_dwc_460ex.o: warning: objtool: sata_dwc_bmdma_start_by_tag()+0x3a2: can't find switch jump table net/ceph/messenger.o: warning: objtool: ceph_con_workfn()+0x47c: can't find switch jump table Make objtool's find_jump_table() smart enough to distinguish between a switch jump table (which has relocations to text addresses in the same function as the original instruction) and other anonymous rodata (which may have relocations to elsewhere). Reported-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Link: https://github.com/ClangBuiltLinux/linux/issues/485 Link: https://lkml.kernel.org/r/263f6aae46d33da0b86d7030ced878cb5cab1788.1581997059.git.jpoimboe@redhat.com
2020-02-11objtool: Add relocation check for alternative sectionsJosh Poimboeuf1-0/+21
Relocations in alternative code can be dangerous, because the code is copy/pasted to the text section after relocations have been resolved, which can corrupt PC-relative addresses. However, relocations might be acceptable in some cases, depending on the architecture. For example, the x86 alternatives code manually fixes up the target addresses for PC-relative jumps and calls. So disallow relocations in alternative code, except where the x86 arch code allows it. This code may need to be tweaked for other arches when objtool gets support for them. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Julien Thierry <jthierry@redhat.com> Link: https://lkml.kernel.org/r/7b90b68d093311e4e8f6b504a9e1c758fd7e0002.1581359535.git.jpoimboe@redhat.com
2020-02-11objtool: Add is_static_jump() helperJosh Poimboeuf1-6/+9
There are several places where objtool tests for a non-dynamic (aka direct) jump. Move the check to a helper function. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Julien Thierry <jthierry@redhat.com> Link: https://lkml.kernel.org/r/9b8b438df918276315e4765c60d2587f3c7ad698.1581359535.git.jpoimboe@redhat.com
2020-02-11objtool: Fail the kernel build on fatal errorsJosh Poimboeuf1-3/+9
When objtool encounters a fatal error, it usually means the binary is corrupt or otherwise broken in some way. Up until now, such errors were just treated as warnings which didn't fail the kernel build. However, objtool is now stable enough that if a fatal error is discovered, it most likely means something is seriously wrong and it should fail the kernel build. Note that this doesn't apply to "normal" objtool warnings; only fatal ones. Suggested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Julien Thierry <jthierry@redhat.com> Link: https://lkml.kernel.org/r/f18c3743de0fef673d49dd35760f26bdef7f6fc3.1581359535.git.jpoimboe@redhat.com
2020-01-22objtool: Fix ARCH=x86_64 build errorShile Zhang1-5/+1
Building objtool with ARCH=x86_64 fails with: $make ARCH=x86_64 -C tools/objtool ... CC arch/x86/decode.o arch/x86/decode.c:10:22: fatal error: asm/insn.h: No such file or directory #include <asm/insn.h> ^ compilation terminated. mv: cannot stat ‘arch/x86/.decode.o.tmp’: No such file or directory make[2]: *** [arch/x86/decode.o] Error 1 ... The root cause is that the command-line variable 'ARCH' cannot be overridden. It can be replaced by 'SRCARCH', which is defined in 'tools/scripts/Makefile.arch'. Signed-off-by: Shile Zhang <shile.zhang@linux.alibaba.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Link: https://lore.kernel.org/r/d5d11370ae116df6c653493acd300ec3d7f5e925.1579543924.git.jpoimboe@redhat.com
2020-01-22objtool: Silence build outputOlof Johansson1-2/+0
The sync-check.sh script prints out the path due to a "cd -" at the end of the script, even on silent builds. This isn't even needed, since the script is executed in our build instead of sourced (so it won't change the working directory of the surrounding build anyway). Just remove the cd to make the build silent. Fixes: 2ffd84ae973b ("objtool: Update sync-check.sh from perf's check-headers.sh") Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/cb002857fafa8186cfb9c3e43fb62e4108a1bab9.1579543924.git.jpoimboe@redhat.com
2019-11-26Merge branch 'perf-core-for-linus' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "The main kernel side changes in this cycle were: - Various Intel-PT updates and optimizations (Alexander Shishkin) - Prohibit kprobes on Xen/KVM emulate prefixes (Masami Hiramatsu) - Add support for LSM and SELinux checks to control access to the perf syscall (Joel Fernandes) - Misc other changes, optimizations, fixes and cleanups - see the shortlog for details. There were numerous tooling changes as well - 254 non-merge commits. Here are the main changes - too many to list in detail: - Enhancements to core tooling infrastructure, perf.data, libperf, libtraceevent, event parsing, vendor events, Intel PT, callchains, BPF support and instruction decoding. - There were updates to the following tools: perf annotate perf diff perf inject perf kvm perf list perf maps perf parse perf probe perf record perf report perf script perf stat perf test perf trace - And a lot of other changes: please see the shortlog and Git log for more details" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (279 commits) perf parse: Fix potential memory leak when handling tracepoint errors perf probe: Fix spelling mistake "addrees" -> "address" libtraceevent: Fix memory leakage in copy_filter_type libtraceevent: Fix header installation perf intel-bts: Does not support AUX area sampling perf intel-pt: Add support for decoding AUX area samples perf intel-pt: Add support for recording AUX area samples perf pmu: When using default config, record which bits of config were changed by the user perf auxtrace: Add support for queuing AUX area samples perf session: Add facility to peek at all events perf auxtrace: Add support for dumping AUX area samples perf inject: Cut AUX area samples perf record: Add aux-sample-size config term perf record: Add support for AUX area sampling perf auxtrace: Add support for AUX area sample recording perf auxtrace: Move perf_evsel__find_pmu() perf record: Add a function to test for kernel support for AUX area sampling perf tools: Add kernel AUX area sampling definitions perf/core: Make the mlock accounting simple again perf report: Jump to symbol source view from total cycles view ...
2019-11-26Merge branch 'x86-asm-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 asm updates from Ingo Molnar: "The main changes in this cycle were: - Cross-arch changes to move the linker sections for NOTES and EXCEPTION_TABLE into the RO_DATA area, where they belong on most architectures. (Kees Cook) - Switch the x86 linker fill byte from x90 (NOP) to 0xcc (INT3), to trap jumps into the middle of those padding areas instead of sliding execution. (Kees Cook) - A thorough cleanup of symbol definitions within x86 assembler code. The rather randomly named macros got streamlined around a (hopefully) straightforward naming scheme: SYM_START(name, linkage, align...) SYM_END(name, sym_type) SYM_FUNC_START(name) SYM_FUNC_END(name) SYM_CODE_START(name) SYM_CODE_END(name) SYM_DATA_START(name) SYM_DATA_END(name) etc - with about three times of these basic primitives with some label, local symbol or attribute variant, expressed via postfixes. No change in functionality intended. (Jiri Slaby) - Misc other changes, cleanups and smaller fixes" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (67 commits) x86/entry/64: Remove pointless jump in paranoid_exit x86/entry/32: Remove unused resume_userspace label x86/build/vdso: Remove meaningless CFLAGS_REMOVE_*.o m68k: Convert missed RODATA to RO_DATA x86/vmlinux: Use INT3 instead of NOP for linker fill bytes x86/mm: Report actual image regions in /proc/iomem x86/mm: Report which part of kernel image is freed x86/mm: Remove redundant address-of operators on addresses xtensa: Move EXCEPTION_TABLE to RO_DATA segment powerpc: Move EXCEPTION_TABLE to RO_DATA segment parisc: Move EXCEPTION_TABLE to RO_DATA segment microblaze: Move EXCEPTION_TABLE to RO_DATA segment ia64: Move EXCEPTION_TABLE to RO_DATA segment h8300: Move EXCEPTION_TABLE to RO_DATA segment c6x: Move EXCEPTION_TABLE to RO_DATA segment arm64: Move EXCEPTION_TABLE to RO_DATA segment alpha: Move EXCEPTION_TABLE to RO_DATA segment x86/vmlinux: Move EXCEPTION_TABLE to RO_DATA segment x86/vmlinux: Actually use _etext for the end of the text segment vmlinux.lds.h: Allow EXCEPTION_TABLE to live in RO_DATA ...
2019-10-28ubsan, x86: Annotate and allow __ubsan_handle_shift_out_of_bounds() in ↵Peter Zijlstra1-0/+1
uaccess regions The new check_zeroed_user() function uses variable shifts inside of a user_access_begin()/user_access_end() section and that results in GCC emitting __ubsan_handle_shift_out_of_bounds() calls, even though through value range analysis it would be able to see that the UB in question is impossible. Annotate and whitelist this UBSAN function; continued use of user_access_begin()/user_access_end() will undoubtedly result in further uses of function. Reported-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: cyphar@cyphar.com Cc: keescook@chromium.org Cc: linux@rasmusvillemoes.dk Fixes: f5a1a536fa14 ("lib: introduce copy_struct_from_user() helper") Link: https://lkml.kernel.org/r/20191021131149.GA19358@hirez.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-10-17x86: xen: insn: Decode Xen and KVM emulate-prefix signatureMasami Hiramatsu1-1/+2
Decode Xen and KVM's emulate-prefix signature by x86 insn decoder. It is called "prefix" but actually not x86 instruction prefix, so this adds insn.emulate_prefix_size field instead of reusing insn.prefixes. If x86 decoder finds a special sequence of instructions of XEN_EMULATE_PREFIX and 'ud2a; .ascii "kvm"', it just counts the length, set insn.emulate_prefix_size and fold it with the next instruction. In other words, the signature and the next instruction is treated as a single instruction. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: x86@kernel.org Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Borislav Petkov <bp@alien8.de> Cc: xen-devel@lists.xenproject.org Cc: Randy Dunlap <rdunlap@infradead.org> Link: https://lkml.kernel.org/r/156777564986.25081.4964537658500952557.stgit@devnote2
2019-09-30objtool: add kunit_try_catch_throw to the noreturn listBrendan Higgins1-0/+1
Fix the following warning seen on GCC 7.3: kunit/test-test.o: warning: objtool: kunit_test_unsuccessful_try() falls through to next function kunit_test_catch() kunit_try_catch_throw is a function added in the following patch in this series; it allows KUnit, a unit testing framework for the kernel, to bail out of a broken test. As a consequence, it is a new __noreturn function that objtool thinks is broken (as seen above). So fix this warning by adding kunit_try_catch_throw to objtool's noreturn list. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://www.spinics.net/lists/linux-kbuild/msg21708.html Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-09-25KVM: x86: Check kvm_rebooting in kvm_spurious_fault()Sean Christopherson1-1/+0
Explicitly check kvm_rebooting in kvm_spurious_fault() prior to invoking BUG(), as opposed to assuming the caller has already done so. Letting kvm_spurious_fault() be called "directly" will allow VMX to better optimize its low level assembly flows. As a happy side effect, kvm_spurious_fault() no longer needs to be marked as a dead end since it doesn't unconditionally BUG(). Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-16Merge branch 'perf-core-for-linus' of ↵Linus Torvalds12-2716/+39
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "Kernel side changes: - Improved kbprobes robustness - Intel PEBS support for PT hardware tracing - Other Intel PT improvements: high order pages memory footprint reduction and various related cleanups - Misc cleanups The perf tooling side has been very busy in this cycle, with over 300 commits. This is an incomplete high-level summary of the many improvements done by over 30 developers: - Lots of updates to the following tools: 'perf c2c' 'perf config' 'perf record' 'perf report' 'perf script' 'perf test' 'perf top' 'perf trace' - Updates to libperf and libtraceevent, and a consolidation of the proliferation of x86 instruction decoder libraries. - Vendor event updates for Intel and PowerPC CPUs, - Updates to hardware tracing tooling for ARM and Intel CPUs, - ... and lots of other changes and cleanups - see the shortlog and Git log for details" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (322 commits) kprobes: Prohibit probing on BUG() and WARN() address perf/x86: Make more stuff static x86, perf: Fix the dependency of the x86 insn decoder selftest objtool: Ignore intentional differences for the x86 insn decoder objtool: Update sync-check.sh from perf's check-headers.sh perf build: Ignore intentional differences for the x86 insn decoder perf intel-pt: Use shared x86 insn decoder perf intel-pt: Remove inat.c from build dependency list perf: Update .gitignore file objtool: Move x86 insn decoder to a common location perf metricgroup: Support multiple events for metricgroup perf metricgroup: Scale the metric result perf pmu: Change convert_scale from static to global perf symbols: Move mem_info and branch_info out of symbol.h perf auxtrace: Uninline functions that touch perf_session perf tools: Remove needless evlist.h include directives perf tools: Remove needless evlist.h include directives perf tools: Remove needless thread_map.h include directives perf tools: Remove needless thread.h include directives perf tools: Remove needless map.h include directives ...
2019-09-10objtool: Clobber user CFLAGS variableJosh Poimboeuf1-1/+1
If the build user has the CFLAGS variable set in their environment, objtool blindly appends to it, which can cause unexpected behavior. Clobber CFLAGS to ensure consistent objtool compilation behavior. Reported-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Tested-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/83a276df209962e6058fcb6c615eef9d401c21bc.1567121311.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-08-31objtool: Ignore intentional differences for the x86 insn decoderArnaldo Carvalho de Melo1-4/+5
Since we need to build this in !x86, we need to explicitely use the x86 files, not things like asm/insn.h, so we intentionally differ from the master copy in the kernel sources, add -I diff directives to ignore just these differences when checking for drift. Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: http://lore.kernel.org/lkml/20190830193109.p7jagidsrahoa4pn@treble Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/n/tip-j965m9b7xtdc83em3twfkh9o@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-31objtool: Update sync-check.sh from perf's check-headers.shArnaldo Carvalho de Melo1-5/+26
To allow using the -I trick that will be needed for checking the x86 insn decoder files. Without the specific -I lines we still get the same warnings as before: $ make -C tools/objtool/ clean ; make -C tools/objtool/ make: Entering directory '/home/acme/git/perf/tools/objtool' CLEAN objtool find -name '*.o' -delete -o -name '\.*.cmd' -delete -o -name '\.*.d' -delete rm -f arch/x86/inat-tables.c fixdep <SNIP> LD objtool-in.o make[1]: Leaving directory '/home/acme/git/perf/tools/objtool' Warning: Kernel ABI header at 'tools/arch/x86/include/asm/inat.h' differs from latest version at 'arch/x86/include/asm/inat.h' diff -u tools/arch/x86/include/asm/inat.h arch/x86/include/asm/inat.h Warning: Kernel ABI header at 'tools/arch/x86/include/asm/insn.h' differs from latest version at 'arch/x86/include/asm/insn.h' diff -u tools/arch/x86/include/asm/insn.h arch/x86/include/asm/insn.h Warning: Kernel ABI header at 'tools/arch/x86/lib/inat.c' differs from latest version at 'arch/x86/lib/inat.c' diff -u tools/arch/x86/lib/inat.c arch/x86/lib/inat.c Warning: Kernel ABI header at 'tools/arch/x86/lib/insn.c' differs from latest version at 'arch/x86/lib/insn.c' diff -u tools/arch/x86/lib/insn.c arch/x86/lib/insn.c /home/acme/git/perf/tools/objtool LINK objtool make: Leaving directory '/home/acme/git/perf/tools/objtool' $ The next patch will add the -I lines for those files. Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: http://lore.kernel.org/lkml/20190830193109.p7jagidsrahoa4pn@treble Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/n/tip-vu3p38mnxlwd80rlsnjkqcf2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-31objtool: Move x86 insn decoder to a common locationJosh Poimboeuf12-2711/+12
The kernel tree has three identical copies of the x86 instruction decoder. Two of them are in the tools subdir. The tools subdir is supposed to be completely standalone and separate from the kernel. So having at least one copy of the kernel decoder in the tools subdir is unavoidable. However, we don't need *two* of them. Move objtool's copy of the decoder to a shared location, so that perf will also be able to use it. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: x86@kernel.org Link: http://lore.kernel.org/lkml/55b486b88f6bcd0c9a2a04b34f964860c8390ca8.1567118001.git.jpoimboe@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-25objtool: Improve UACCESS coveragePeter Zijlstra2-4/+6
A clang build reported an (obvious) double CLAC while a GCC build did not; it turns out that objtool only re-visits instructions if the first visit was with AC=0. If OTOH the first visit was with AC=1, it completely ignores any subsequent visit, even when it has AC=0. Fix this by using a visited mask instead of a boolean, and (explicitly) mark the AC state. $ ./objtool check -b --no-fp --retpoline --uaccess drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool: .altinstr_replacement+0x22: redundant UACCESS disable drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool: eb_copy_relocations.isra.34()+0xea: (alt) drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool: .altinstr_replacement+0xffffffffffffffff: (branch) drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool: eb_copy_relocations.isra.34()+0xd9: (alt) drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool: eb_copy_relocations.isra.34()+0xb2: (branch) drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool: eb_copy_relocations.isra.34()+0x39: (branch) drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool: eb_copy_relocations.isra.34()+0x0: <=== (func) Reported-by: Josh Poimboeuf <jpoimboe@redhat.com> Reported-by: Thomas Gleixner <tglx@linutronix.de> Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Link: https://github.com/ClangBuiltLinux/linux/issues/617 Link: https://lkml.kernel.org/r/5359166aad2d53f3145cd442d83d0e5115e0cd17.1564007838.git.jpoimboe@redhat.com
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-03 08:09:38 +0000