summaryrefslogtreecommitdiffstats
path: root/tools/lib
AgeCommit message (Collapse)AuthorFilesLines
2019-09-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds2-17/+88
Pull networking fixes from David Miller: 1) Sanity check URB networking device parameters to avoid divide by zero, from Oliver Neukum. 2) Disable global multicast filter in NCSI, otherwise LLDP and IPV6 don't work properly. Longer term this needs a better fix tho. From Vijay Khemka. 3) Small fixes to selftests (use ping when ping6 is not present, etc.) from David Ahern. 4) Bring back rt_uses_gateway member of struct rtable, it's semantics were not well understood and trying to remove it broke things. From David Ahern. 5) Move usbnet snaity checking, ignore endpoints with invalid wMaxPacketSize. From Bjørn Mork. 6) Missing Kconfig deps for sja1105 driver, from Mao Wenan. 7) Various small fixes to the mlx5 DR steering code, from Alaa Hleihel, Alex Vesker, and Yevgeny Kliteynik 8) Missing CAP_NET_RAW checks in various places, from Ori Nimron. 9) Fix crash when removing sch_cbs entry while offloading is enabled, from Vinicius Costa Gomes. 10) Signedness bug fixes, generally in looking at the result given by of_get_phy_mode() and friends. From Dan Crapenter. 11) Disable preemption around BPF_PROG_RUN() calls, from Eric Dumazet. 12) Don't create VRF ipv6 rules if ipv6 is disabled, from David Ahern. 13) Fix quantization code in tcp_bbr, from Kevin Yang. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (127 commits) net: tap: clean up an indentation issue nfp: abm: fix memory leak in nfp_abm_u32_knode_replace tcp: better handle TCP_USER_TIMEOUT in SYN_SENT state sk_buff: drop all skb extensions on free and skb scrubbing tcp_bbr: fix quantization code to not raise cwnd if not probing bandwidth mlxsw: spectrum_flower: Fail in case user specifies multiple mirror actions Documentation: Clarify trap's description mlxsw: spectrum: Clear VLAN filters during port initialization net: ena: clean up indentation issue NFC: st95hf: clean up indentation issue net: phy: micrel: add Asym Pause workaround for KSZ9021 net: socionext: ave: Avoid using netdev_err() before calling register_netdev() ptp: correctly disable flags on old ioctls lib: dimlib: fix help text typos net: dsa: microchip: Always set regmap stride to 1 nfp: flower: fix memory leak in nfp_flower_spawn_vnic_reprs nfp: flower: prevent memory leak in nfp_flower_spawn_phy_reprs net/sched: Set default of CONFIG_NET_TC_SKB_EXT to N vrf: Do not attempt to create IPv6 mcast rule if IPv6 is disabled net: sched: sch_sfb: don't call qdisc_put() while holding tree lock ...
2019-09-26Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds21-116/+507
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull more perf updates from Ingo Molnar: "The only kernel change is comment typo fixes. The rest is mostly tooling fixes, but also new vendor event additions and updates, a bigger libperf/libtraceevent library and a header files reorganization that came in a bit late" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (108 commits) perf unwind: Fix libunwind build failure on i386 systems perf parser: Remove needless include directives perf build: Add detection of java-11-openjdk-devel package perf jvmti: Include JVMTI support for s390 perf vendor events: Remove P8 HW events which are not supported perf evlist: Fix access of freed id arrays perf stat: Fix free memory access / memory leaks in metrics perf tools: Replace needless mmap.h with what is needed, event.h perf evsel: Move config terms to a separate header perf evlist: Remove unused perf_evlist__fprintf() method perf evsel: Introduce evsel_fprintf.h perf evsel: Remove need for symbol_conf in evsel_fprintf.c perf copyfile: Move copyfile routines to separate files libperf: Add perf_evlist__poll() function libperf: Add perf_evlist__add_pollfd() function libperf: Add perf_evlist__alloc_pollfd() function libperf: Add libperf_init() call to the tests libperf: Merge libperf_set_print() into libperf_init() libperf: Add libperf dependency for tests targets libperf: Use sys/types.h to get ssize_t, not unistd.h ...
2019-09-26libbpf: Teach btf_dumper to emit stand-alone anonymous enum definitionsAndrii Nakryiko1-6/+87
BTF-to-C converter previously skipped anonymous enums in an assumption that those are embedded in struct's field definitions. This is not always the case and a lot of kernel constants are defined as part of anonymous enums. This change fixes the logic by eagerly marking all types as either referenced by any other type or not. This is enough to distinguish two classes of anonymous enums and emit previously omitted enum definitions. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20190925203745.3173184-1-andriin@fb.com
2019-09-25rbtree: avoid generating code twice for the cached versions (tools copy)Michel Lespinasse1-34/+3
As was already noted in rbtree.h, the logic to cache rb_first (or rb_last) can easily be implemented externally to the core rbtree api. This commit takes the changes applied to the include/linux/ and lib/ rbtree files in 9f973cb38088 ("lib/rbtree: avoid generating code twice for the cached versions"), and applies these to the tools/include/linux/ and tools/lib/ files as well to keep them synchronized. Link: http://lkml.kernel.org/r/20190703034812.53002-1-walken@google.com Signed-off-by: Michel Lespinasse <walken@google.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-25libbpf: fix false uninitialized variable warningAndrii Nakryiko1-0/+1
Some compilers emit warning for potential uninitialized next_id usage. The code is correct, but control flow is too complicated for some compilers to figure this out. Re-initialize next_id to satisfy compiler. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-09-25libtraceevent: Man pages for tep plugins APIsTzvetomir Stoyanov1-0/+99
Create man pages for libtraceevent APIs: tep_load_plugins(), tep_unload_plugin() Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: linux-trace-devel@vger.kernel.org Link: http://lore.kernel.org/linux-trace-devel/20190903133434.30417-1-tz.stoyanov@gmail.com Link: http://lore.kernel.org/lkml/20190919212542.216189588@goodmis.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-25libtraceevent: Move traceevent plugins in its own subdirectoryTzvetomir Stoyanov (VMware)14-89/+248
All traceevent plugins code is moved to tools/lib/traceevent/plugins subdirectory. It makes traceevent implementation in trace-cmd and in kernel tree consistent. There is no changes in the way libtraceevent and plugins are compiled and installed. Committer notes: Applied fixup provided by Steven, fixing the tools/perf/Makefile.perf target for the plugin dynamic list file. Problem noticed when cross building to aarch64 from a Ubuntu 19.04 container. Suggested-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com> Cc: linux-trace-devel@vger.kernel.org Link: http://lore.kernel.org/lkml/20190923115929.453b68f1@oasis.local.home Link: http://lore.kernel.org/lkml/20190919212542.377333393@goodmis.org Link: http://lore.kernel.org/linux-trace-devel/20190917105055.18983-1-tz.stoyanov@gmail.com Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-25libtraceevent: Add tep_get_event() in event-parse.hTzvetomir Stoyanov (VMware)1-0/+2
The tep_get_event() function is an official libtracevent API, described in the library man pages. However, it cannot be used by the library users because it is not declared in the event-parse.h file, where all libtracevent APIs are. The function declaration is added in event-parse.h file. Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com> Cc: linux-trace-devel@vger.kernel.org Link: http://lore.kernel.org/linux-trace-devel/20190808113721.13539-1-tz.stoyanov@gmail.com Link: http://lore.kernel.org/lkml/20190919212542.058025937@goodmis.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-25libtraceevent: Man pages fix, changes in event printing APIsTzvetomir Stoyanov (VMware)1-12/+1
APIs for printing various trace event information were redesigned to be more simple. However, the main libtraceevent man page was not updated with those changes. The documentation is updated to describe the new event print API. Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com> Cc: linux-trace-devel@vger.kernel.org Link: http://lore.kernel.org/linux-trace-devel/20190808113636.13299-3-tz.stoyanov@gmail.com Link: http://lore.kernel.org/lkml/20190919212541.869643036@goodmis.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-25libtraceevent: Man pages fix, rename tep_ref_get() to tep_get_ref()Tzvetomir Stoyanov (VMware)2-5/+5
The tep_ref_get() was renamed to tep_get_ref(), to be more consistent with the other tep_ref_* APIs. However, in the man pages the API is still with the old name. The documentation is fixed to reflect the actual name of the API. Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com> Cc: linux-trace-devel@vger.kernel.org Link: http://lore.kernel.org/linux-trace-devel/20190808113636.13299-2-tz.stoyanov@gmail.com Link: http://lore.kernel.org/lkml/20190919212541.697034573@goodmis.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-25libtraceevent: Man pages for libtraceevent event print related APITzvetomir Stoyanov1-0/+130
Added new man page, describing tep_print_event() libtraceevent API. Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: linux-trace-devel@vger.kernel.org Link: http://lore.kernel.org/linux-trace-devel/20190801075012.22098-1-tz.stoyanov@gmail.com Link: http://lore.kernel.org/lkml/20190919212541.553160178@goodmis.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-25libtraceevent: Round up in tep_print_event() time precisionSteven Rostedt (VMware)1-1/+3
When testing the output of the old trace-cmd compared to the one that uses the updated tep_print_event() logic, it was different in that the time stamp precision in the old format would round up to the nearest precision, where as the new logic truncates. Bring back the old method of rounding up. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com> Cc: linux trace devel <linux-trace-devel@vger.kernel.org> Link: http://lore.kernel.org/lkml/20190919165119.5efa5de6@gandalf.local.home Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-20tools lib traceevent: Convert remaining %p[fF] users to %p[sS]Sakari Ailus2-9/+19
There are no in-kernel %p[fF] users left. Convert the traceevent tool, too, to align with the kernel. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: devicetree@vger.kernel.org Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: linux-acpi@vger.kernel.org Cc: linux-trace-devel@vger.kernel.org Cc: Namhyung Kim <namhyung@kernel.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com> Link: http://lore.kernel.org/lkml/20190918133419.7969-2-sakari.ailus@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-19libbpf: Remove getsockopt() check for XDP_OPTIONSToke Høiland-Jørgensen1-11/+0
The xsk_socket__create() function fails and returns an error if it cannot get the XDP_OPTIONS through getsockopt(). However, support for XDP_OPTIONS was not added until kernel 5.3, so this means that creating XSK sockets always fails on older kernels. Since the option is just used to set the zero-copy flag in the xsk struct, and that flag is not really used for anything yet, just remove the getsockopt() call until a proper use for it is introduced. Suggested-by: Yonghong Song <yhs@fb.com> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-09-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds13-349/+1515
Pull networking updates from David Miller: 1) Support IPV6 RA Captive Portal Identifier, from Maciej Żenczykowski. 2) Use bio_vec in the networking instead of custom skb_frag_t, from Matthew Wilcox. 3) Make use of xmit_more in r8169 driver, from Heiner Kallweit. 4) Add devmap_hash to xdp, from Toke Høiland-Jørgensen. 5) Support all variants of 5750X bnxt_en chips, from Michael Chan. 6) More RTNL avoidance work in the core and mlx5 driver, from Vlad Buslov. 7) Add TCP syn cookies bpf helper, from Petar Penkov. 8) Add 'nettest' to selftests and use it, from David Ahern. 9) Add extack support to drop_monitor, add packet alert mode and support for HW drops, from Ido Schimmel. 10) Add VLAN offload to stmmac, from Jose Abreu. 11) Lots of devm_platform_ioremap_resource() conversions, from YueHaibing. 12) Add IONIC driver, from Shannon Nelson. 13) Several kTLS cleanups, from Jakub Kicinski. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1930 commits) mlxsw: spectrum_buffers: Add the ability to query the CPU port's shared buffer mlxsw: spectrum: Register CPU port with devlink mlxsw: spectrum_buffers: Prevent changing CPU port's configuration net: ena: fix incorrect update of intr_delay_resolution net: ena: fix retrieval of nonadaptive interrupt moderation intervals net: ena: fix update of interrupt moderation register net: ena: remove all old adaptive rx interrupt moderation code from ena_com net: ena: remove ena_restore_ethtool_params() and relevant fields net: ena: remove old adaptive interrupt moderation code from ena_netdev net: ena: remove code duplication in ena_com_update_nonadaptive_moderation_interval _*() net: ena: enable the interrupt_moderation in driver_supported_features net: ena: reimplement set/get_coalesce() net: ena: switch to dim algorithm for rx adaptive interrupt moderation net: ena: add intr_moder_rx_interval to struct ena_com_dev and use it net: phy: adin: implement Energy Detect Powerdown mode via phy-tunable ethtool: implement Energy Detect Powerdown support via phy-tunable xen-netfront: do not assume sk_buff_head list is empty in error handling s390/ctcm: Delete unnecessary checks before the macro call “dev_kfree_skb” net: ena: don't wake up tx queue when down drop_monitor: Better sanitize notified packets ...
2019-09-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller6-63/+113
Daniel Borkmann says: ==================== The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Add the ability to use unaligned chunks in the AF_XDP umem. By relaxing where the chunks can be placed, it allows to use an arbitrary buffer size and place whenever there is a free address in the umem. Helps more seamless DPDK AF_XDP driver integration. Support for i40e, ixgbe and mlx5e, from Kevin and Maxim. 2) Addition of a wakeup flag for AF_XDP tx and fill rings so the application can wake up the kernel for rx/tx processing which avoids busy-spinning of the latter, useful when app and driver is located on the same core. Support for i40e, ixgbe and mlx5e, from Magnus and Maxim. 3) bpftool fixes for printf()-like functions so compiler can actually enforce checks, bpftool build system improvements for custom output directories, and addition of 'bpftool map freeze' command, from Quentin. 4) Support attaching/detaching XDP programs from 'bpftool net' command, from Daniel. 5) Automatic xskmap cleanup when AF_XDP socket is released, and several barrier/{read,write}_once fixes in AF_XDP code, from Björn. 6) Relicense of bpf_helpers.h/bpf_endian.h for future libbpf inclusion as well as libbpf versioning improvements, from Andrii. 7) Several new BPF kselftests for verifier precision tracking, from Alexei. 8) Several BPF kselftest fixes wrt endianess to run on s390x, from Ilya. 9) And more BPF kselftest improvements all over the place, from Stanislav. 10) Add simple BPF map op cache for nfp driver to batch dumps, from Jakub. 11) AF_XDP socket umem mapping improvements for 32bit archs, from Ivan. 12) Add BPF-to-BPF call and BTF line info support for s390x JIT, from Yauheni. 13) Small optimization in arm64 JIT to spare 1 insns for BPF_MOD, from Jerin. 14) Fix an error check in bpf_tcp_gen_syncookie() helper, from Petar. 15) Various minor fixes and cleanups, from Nathan, Masahiro, Masanari, Peter, Wei, Yue. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31libtraceevent: Change users plugin directoryTzvetomir Stoyanov2-4/+4
To be compliant with XDG user directory layout, the user's plugin directory is changed from ~/.traceevent/plugins to ~/.local/lib/traceevent/plugins/ Suggested-by: Patrick McLean <chutzpah@gentoo.org> Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Patrick McLean <chutzpah@gentoo.org> Cc: linux-trace-devel@vger.kernel.org Link: https://lore.kernel.org/linux-trace-devel/20190313144206.41e75cf8@patrickm/ Link: http://lore.kernel.org/linux-trace-devel/20190801074959.22023-4-tz.stoyanov@gmail.com Link: http://lore.kernel.org/lkml/20190805204355.344622683@goodmis.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-31libtraceevent: Remove tep_register_trace_clock()Tzvetomir Stoyanov3-14/+0
The tep_register_trace_clock() API is used to instruct the traceevent library how to print the event time stamps. As event print interface if redesigned, this API is not needed any more. The new event print API is flexible and the user can specify how the time stamps are printed. Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Patrick McLean <chutzpah@gentoo.org> Cc: linux-trace-devel@vger.kernel.org Link: http://lore.kernel.org/linux-trace-devel/20190801074959.22023-3-tz.stoyanov@gmail.com Link: http://lore.kernel.org/lkml/20190805204355.195042846@goodmis.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-31libtraceevent, perf tools: Changes in tep_print_event_* APIsTzvetomir Stoyanov4-197/+198
Libtraceevent APIs for printing various trace events information are complicated, there are complex extra parameters. To control the way event information is printed, the user should call a set of functions in a specific sequence. These APIs are reimplemented to provide a more simple interface for printing event information. Removed APIs: tep_print_event_task() tep_print_event_time() tep_print_event_data() tep_event_info() tep_is_latency_format() tep_set_latency_format() tep_data_latency_format() tep_set_print_raw() A new API for printing event information is introduced: void tep_print_event(struct tep_handle *tep, struct trace_seq *s, struct tep_record *record, const char *fmt, ...); where "fmt" is a printf-like format string, followed by the event fields to be printed. Supported fields: TEP_PRINT_PID, "%d" - event PID TEP_PRINT_CPU, "%d" - event CPU TEP_PRINT_COMM, "%s" - event command string TEP_PRINT_NAME, "%s" - event name TEP_PRINT_LATENCY, "%s" - event latency TEP_PRINT_TIME, %d - event time stamp. A divisor and precision can be specified as part of this format string: "%precision.divisord". Example: "%3.1000d" - divide the time by 1000 and print the first 3 digits before the dot. Thus, the time stamp "123456000" will be printed as "123.456" TEP_PRINT_INFO, "%s" - event information. TEP_PRINT_INFO_RAW, "%s" - event information, in raw format. Example: tep_print_event(tep, s, record, "%16s-%-5d [%03d] %s %6.1000d %s %s", TEP_PRINT_COMM, TEP_PRINT_PID, TEP_PRINT_CPU, TEP_PRINT_LATENCY, TEP_PRINT_TIME, TEP_PRINT_NAME, TEP_PRINT_INFO); Output: ls-11314 [005] d.h. 185207.366383 function __wake_up Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: linux-trace-devel@vger.kernel.org Cc: Patrick McLean <chutzpah@gentoo.org> Link: http://lore.kernel.org/linux-trace-devel/20190801074959.22023-2-tz.stoyanov@gmail.com Link: http://lore.kernel.org/lkml/20190805204355.041132030@goodmis.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-31libbpf: add flags to umem configKevin Laatz4-4/+62
This patch adds a 'flags' field to the umem_config and umem_reg structs. This will allow for more options to be added for configuring umems. The first use for the flags field is to add a flag for unaligned chunks mode. These flags can either be user-provided or filled with a default. Since we change the size of the xsk_umem_config struct, we need to version the ABI. This patch includes the ABI versioning for xsk_umem__create. The Makefile was also updated to handle multiple function versions in check-abi. Signed-off-by: Kevin Laatz <kevin.laatz@intel.com> Signed-off-by: Ciara Loftus <ciara.loftus@intel.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-29tools lib traceevent: Remove unneeded qsort and uses memmove insteadSteven Rostedt (VMware)1-6/+49
While reading a trace data file that had 100,000s of tasks, the process took an extremely long time. I profiled it down to add_new_comm(), which was doing a qsort() call on an array that was pretty much already sorted (all but the last element. qsort() isn't very efficient when dealing with mostly sorted arrays, and this definitely showed its issues. When adding a new task to the task list, instead of using qsort(), do another bsearch() with a function that will find the element before where the new task will be inserted in. Then simply shift the rest of the array, and insert the task where it belongs. Fixes: f7d82350e597d ("tools/events: Add files to create libtraceevent.a") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: linux-trace-devel@vger.kernel.org Link: http://lkml.kernel.org/r/20190828191820.127233764@goodmis.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-29tools lib traceevent: Do not free tep->cmdlines in add_new_comm() on failureSteven Rostedt (VMware)1-2/+1
If the re-allocation of tep->cmdlines succeeds, then the previous allocation of tep->cmdlines will be freed. If we later fail in add_new_comm(), we must not free cmdlines, and also should assign tep->cmdlines to the new allocation. Otherwise when freeing tep, the tep->cmdlines will be pointing to garbage. Fixes: a6d2a61ac653a ("tools lib traceevent: Remove some die() calls") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: linux-trace-devel@vger.kernel.org Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20190828191819.970121417@goodmis.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-26Merge tag 'v5.3-rc6' into perf/core, to pick up fixesIngo Molnar1-15/+18
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-08-21libbpf: use LFS (_FILE_OFFSET_BITS) instead of direct mmap2 syscallIvan Khoronzhuk2-35/+15
Drop __NR_mmap2 fork in flavor of LFS, that is _FILE_OFFSET_BITS=64 (glibc & bionic) / LARGEFILE64_SOURCE (for musl) decision. It allows mmap() to use 64bit offset that is passed to mmap2 syscall. As result pgoff is not truncated and no need to use direct access to mmap2 for 32 bits systems. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-20libbpf: add bpf_btf_get_next_id() to cycle through BTF objectsQuentin Monnet3-0/+8
Add an API function taking a BTF object id and providing the id of the next BTF object in the kernel. This can be used to list all BTF objects loaded on the system. v2: - Rebase on top of Andrii's changes regarding libbpf versioning. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-08-20libbpf: refactor bpf_*_get_next_id() functionsQuentin Monnet1-13/+8
In preparation for the introduction of a similar function for retrieving the id of the next BTF object, consolidate the code from bpf_prog_get_next_id() and bpf_map_get_next_id() in libbpf. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-08-20tools lib traceevent: Fix "robust" test of do_generate_dynamic_list_fileSteven Rostedt (VMware)1-2/+2
The tools/lib/traceevent/Makefile had a test added to it to detect a failure of the "nm" when making the dynamic list file (whatever that is). The problem is that the test sorts the values "U W w" and some versions of sort will place "w" ahead of "W" (even though it has a higher ASCII value, and break the test. Add 'tr "w" "W"' to merge the two and not worry about the ordering. Reported-by: Tzvetomir Stoyanov <tstoyanov@vmware.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Carrillo-Cisneros <davidcc@google.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michal rarek <mmarek@suse.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Wang Nan <wangnan0@huawei.com> Cc: stable@vger.kernel.org Fixes: 6467753d61399 ("tools lib traceevent: Robustify do_generate_dynamic_list_file") Link: http://lkml.kernel.org/r/20190805130150.25acfeb1@gandalf.local.home Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-15/+18
Merge conflict of mlx5 resolved using instructions in merge commit 9566e650bf7fdf58384bb06df634f7531ca3a97e. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17libbpf: add support for need_wakeup flag in AF_XDP partMagnus Karlsson2-0/+10
This commit adds support for the new need_wakeup flag in AF_XDP. The xsk_socket__create function is updated to handle this and a new function is introduced called xsk_ring_prod__needs_wakeup(). This function can be used by the application to check if Rx and/or Tx processing needs to be explicitly woken up. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-15libbpf: make libbpf.map source of truth for libbpf versionAndrii Nakryiko2-12/+11
Currently libbpf version is specified in 2 places: libbpf.map and Makefile. They easily get out of sync and it's very easy to update one, but forget to update another one. In addition, Github projection of libbpf has to maintain its own version which has to be remembered to be kept in sync manually, which is very error-prone approach. This patch makes libbpf.map a source of truth for libbpf version and uses shell invocation to parse out correct full and major libbpf version to use during build. Now we need to make sure that once new release cycle starts, we need to add (initially) empty section to libbpf.map with correct latest version. This also will make it possible to keep Github projection consistent with kernel sources version of libbpf by adopting similar parsing of version from libbpf.map. v2->v3: - grep -o + sort -rV (Andrey); v1->v2: - eager version vars evaluation (Jakub); - simplified version regex (Andrey); Cc: Andrey Ignatov <rdna@fb.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-08-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski7-286/+1402
Daniel Borkmann says: ==================== The following pull-request contains BPF updates for your *net-next* tree. There is a small merge conflict in libbpf (Cc Andrii so he's in the loop as well): for (i = 1; i <= btf__get_nr_types(btf); i++) { t = (struct btf_type *)btf__type_by_id(btf, i); if (!has_datasec && btf_is_var(t)) { /* replace VAR with INT */ t->info = BTF_INFO_ENC(BTF_KIND_INT, 0, 0); <<<<<<< HEAD /* * using size = 1 is the safest choice, 4 will be too * big and cause kernel BTF validation failure if * original variable took less than 4 bytes */ t->size = 1; *(int *)(t+1) = BTF_INT_ENC(0, 0, 8); } else if (!has_datasec && kind == BTF_KIND_DATASEC) { ======= t->size = sizeof(int); *(int *)(t + 1) = BTF_INT_ENC(0, 0, 32); } else if (!has_datasec && btf_is_datasec(t)) { >>>>>>> 72ef80b5ee131e96172f19e74b4f98fa3404efe8 /* replace DATASEC with STRUCT */ Conflict is between the two commits 1d4126c4e119 ("libbpf: sanitize VAR to conservative 1-byte INT") and b03bc6853c0e ("libbpf: convert libbpf code to use new btf helpers"), so we need to pick the sanitation fixup as well as use the new btf_is_datasec() helper and the whitespace cleanup. Looks like the following: [...] if (!has_datasec && btf_is_var(t)) { /* replace VAR with INT */ t->info = BTF_INFO_ENC(BTF_KIND_INT, 0, 0); /* * using size = 1 is the safest choice, 4 will be too * big and cause kernel BTF validation failure if * original variable took less than 4 bytes */ t->size = 1; *(int *)(t + 1) = BTF_INT_ENC(0, 0, 8); } else if (!has_datasec && btf_is_datasec(t)) { /* replace DATASEC with STRUCT */ [...] The main changes are: 1) Addition of core parts of compile once - run everywhere (co-re) effort, that is, relocation of fields offsets in libbpf as well as exposure of kernel's own BTF via sysfs and loading through libbpf, from Andrii. More info on co-re: http://vger.kernel.org/bpfconf2019.html#session-2 and http://vger.kernel.org/lpc-bpf2018.html#session-2 2) Enable passing input flags to the BPF flow dissector to customize parsing and allowing it to stop early similar to the C based one, from Stanislav. 3) Add a BPF helper function that allows generating SYN cookies from XDP and tc BPF, from Petar. 4) Add devmap hash-based map type for more flexibility in device lookup for redirects, from Toke. 5) Improvements to XDP forwarding sample code now utilizing recently enabled devmap lookups, from Jesper. 6) Add support for reporting the effective cgroup progs in bpftool, from Jakub and Takshak. 7) Fix reading kernel config from bpftool via /proc/config.gz, from Peter. 8) Fix AF_XDP umem pages mapping for 32 bit architectures, from Ivan. 9) Follow-up to add two more BPF loop tests for the selftest suite, from Alexei. 10) Add perf event output helper also for other skb-based program types, from Allan. 11) Fix a co-re related compilation error in selftests, from Yonghong. ==================== Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-08-13libbpf: attempt to load kernel BTF from sysfs firstAndrii Nakryiko1-7/+57
Add support for loading kernel BTF from sysfs (/sys/kernel/btf/vmlinux) as a target BTF. Also extend the list of on disk search paths for vmlinux ELF image with entries that perf is searching for. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller1-15/+18
Daniel Borkmann says: ==================== pull-request: bpf 2019-08-11 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) x64 JIT code generation fix for backward-jumps to 1st insn, from Alexei. 2) Fix buggy multi-closing of BTF file descriptor in libbpf, from Andrii. 3) Fix libbpf_num_possible_cpus() to make it thread safe, from Takshak. 4) Fix bpftool to dump an error if pinning fails, from Jakub. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-07libbpf: implement BPF CO-RE offset relocation algorithmAndrii Nakryiko2-18/+864
This patch implements the core logic for BPF CO-RE offsets relocations. Every instruction that needs to be relocated has corresponding bpf_offset_reloc as part of BTF.ext. Relocations are performed by trying to match recorded "local" relocation spec against potentially many compatible "target" types, creating corresponding spec. Details of the algorithm are noted in corresponding comments in the code. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-08-07libbpf: add .BTF.ext offset relocation section loadingAndrii Nakryiko3-42/+136
Add support for BPF CO-RE offset relocations. Add section/record iteration macros for .BTF.ext. These macro are useful for iterating over each .BTF.ext record, either for dumping out contents or later for BPF CO-RE relocation handling. To enable other parts of libbpf to work with .BTF.ext contents, moved a bunch of type definitions into libbpf_internal.h. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-08-07libbpf: convert libbpf code to use new btf helpersAndrii Nakryiko3-221/+158
Simplify code by relying on newly added BTF helper functions. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-08-07libbpf: add helpers for working with BTF typesAndrii Nakryiko1-0/+178
Add lots of frequently used helpers that simplify working with BTF types. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds3-19/+31
Pull networking fixes from David Miller: "Yeah I should have sent a pull request last week, so there is a lot more here than usual: 1) Fix memory leak in ebtables compat code, from Wenwen Wang. 2) Several kTLS bug fixes from Jakub Kicinski (circular close on disconnect etc.) 3) Force slave speed check on link state recovery in bonding 802.3ad mode, from Thomas Falcon. 4) Clear RX descriptor bits before assigning buffers to them in stmmac, from Jose Abreu. 5) Several missing of_node_put() calls, mostly wrt. for_each_*() OF loops, from Nishka Dasgupta. 6) Double kfree_skb() in peak_usb can driver, from Stephane Grosjean. 7) Need to hold sock across skb->destructor invocation, from Cong Wang. 8) IP header length needs to be validated in ipip tunnel xmit, from Haishuang Yan. 9) Use after free in ip6 tunnel driver, also from Haishuang Yan. 10) Do not use MSI interrupts on r8169 chips before RTL8168d, from Heiner Kallweit. 11) Upon bridge device init failure, we need to delete the local fdb. From Nikolay Aleksandrov. 12) Handle erros from of_get_mac_address() properly in stmmac, from Martin Blumenstingl. 13) Handle concurrent rename vs. dump in netfilter ipset, from Jozsef Kadlecsik. 14) Setting NETIF_F_LLTX on mac80211 causes complete breakage with some devices, so revert. From Johannes Berg. 15) Fix deadlock in rxrpc, from David Howells. 16) Fix Kconfig deps of enetc driver, we must have PHYLIB. From Yue Haibing. 17) Fix mvpp2 crash on module removal, from Matteo Croce. 18) Fix race in genphy_update_link, from Heiner Kallweit. 19) bpf_xdp_adjust_head() stopped working with generic XDP when we fixes generic XDP to support stacked devices properly, fix from Jesper Dangaard Brouer. 20) Unbalanced RCU locking in rt6_update_exception_stamp_rt(), from David Ahern. 21) Several memory leaks in new sja1105 driver, from Vladimir Oltean" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (214 commits) net: dsa: sja1105: Fix memory leak on meta state machine error path net: dsa: sja1105: Fix memory leak on meta state machine normal path net: dsa: sja1105: Really fix panic on unregistering PTP clock net: dsa: sja1105: Use the LOCKEDS bit for SJA1105 E/T as well net: dsa: sja1105: Fix broken learning with vlan_filtering disabled net: dsa: qca8k: Add of_node_put() in qca8k_setup_mdio_bus() net: sched: sample: allow accessing psample_group with rtnl net: sched: police: allow accessing police->params with rtnl net: hisilicon: Fix dma_map_single failed on arm64 net: hisilicon: fix hip04-xmit never return TX_BUSY net: hisilicon: make hip04_tx_reclaim non-reentrant tc-testing: updated vlan action tests with batch create/delete net sched: update vlan action for batched events operations net: stmmac: tc: Do not return a fragment entry net: stmmac: Fix issues when number of Queues >= 4 net: stmmac: xgmac: Fix XGMAC selftests be2net: disable bh with spin_lock in be_process_mcc net: cxgb3_main: Fix a resource leak in a error path in 'init_one()' net: ethernet: sun4i-emac: Support phy-handle property for finding PHYs net: bridge: move default pvid init/deinit to NETDEV_REGISTER/UNREGISTER ...
2019-08-01libbpf: set BTF FD for prog only when there is supported .BTF.ext dataAndrii Nakryiko1-1/+5
5d01ab7bac46 ("libbpf: fix erroneous multi-closing of BTF FD") introduced backwards-compatibility issue, manifesting itself as -E2BIG error returned on program load due to unknown non-zero btf_fd attribute value for BPF_PROG_LOAD sys_bpf() sub-command. This patch fixes bug by ensuring that we only ever associate BTF FD with program if there is a BTF.ext data that was successfully loaded into kernel, which automatically means kernel supports func_info/line_info and associated BTF FD for progs (checked and ensured also by BTF sanitization code). Fixes: 5d01ab7bac46 ("libbpf: fix erroneous multi-closing of BTF FD") Reported-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-31libbpf : make libbpf_num_possible_cpus function thread safeTakshak Chahande1-7/+11
Having static variable `cpus` in libbpf_num_possible_cpus function without guarding it with mutex makes this function thread-unsafe. If multiple threads accessing this function, in the current form; it leads to incrementing the static variable value `cpus` in the multiple of total available CPUs. Used local stack variable to calculate the number of possible CPUs and then updated the static variable using WRITE_ONCE(). Changes since v1: * added stack variable to calculate cpus * serialized static variable update using WRITE_ONCE() * fixed Fixes tag Fixes: 6446b3155521 ("bpf: add a new API libbpf_num_possible_cpus()") Signed-off-by: Takshak Chahande <ctakshak@fb.com> Acked-by: Andrey Ignatov <rdna@fb.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-29tools/libbpf_probes: Add new devmap_hash typeToke Høiland-Jørgensen1-0/+1
This adds the definition for BPF_MAP_TYPE_DEVMAP_HASH to libbpf_probes.c in tools/lib/bpf. Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-29libbpf: fix missing __WORDSIZE definitionAndrii Nakryiko1-0/+5
hashmap.h depends on __WORDSIZE being defined. It is defined by glibc/musl in different headers. It's an explicit goal for musl to be "non-detectable" at compilation time, so instead include glibc header if glibc is explicitly detected and fall back to musl header otherwise. Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Fixes: e3b924224028 ("libbpf: add resizable non-thread safe internal hashmap") Link: https://lkml.kernel.org/r/20190718173021.2418606-1-andriin@fb.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-27libbpf: return previous print callback from libbpf_set_printAndrii Nakryiko2-2/+5
By returning previously set print callback from libbpf_set_print, it's possible to restore it, eventually. This is useful when running many independent test with one default print function, but overriding log verbosity for particular subset of tests. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-26libbpf: fix erroneous multi-closing of BTF FDAndrii Nakryiko1-8/+3
Libbpf stores associated BTF FD per each instance of bpf_program. When program is unloaded, that FD is closed. This is wrong, because leads to a race and possibly closing of unrelated files, if application simultaneously opens new files while bpf_programs are unloaded. It's also unnecessary, because struct btf "owns" that FD, and btf__free(), called from bpf_object__close() will close it. Thus the fix is to never have per-program BTF FD and fetch it from obj->btf, when necessary. Fixes: 2993e0515bb4 ("tools/bpf: add support to read .BTF.ext sections") Reported-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller3-19/+31
Alexei Starovoitov says: ==================== pull-request: bpf 2019-07-25 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) fix segfault in libbpf, from Andrii. 2) fix gso_segs access, from Eric. 3) tls/sockmap fixes, from Jakub and John. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-25libbpf: silence GCC8 warning about string truncationAndrii Nakryiko1-2/+2
Despite a proper NULL-termination after strncpy(..., ..., IFNAMSIZ - 1), GCC8 still complains about *expected* string truncation: xsk.c:330:2: error: 'strncpy' output may be truncated copying 15 bytes from a string of length 15 [-Werror=stringop-truncation] strncpy(ifr.ifr_name, xsk->ifname, IFNAMSIZ - 1); This patch gets rid of the issue altogether by using memcpy instead. There is no performance regression, as strncpy will still copy and fill all of the bytes anyway. v1->v2: - rebase against bpf tree. Cc: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-23libbpf: provide more helpful message on uninitialized global varAndrii Nakryiko1-3/+10
When BPF program defines uninitialized global variable, it's put into a special COMMON section. Libbpf will reject such programs, but will provide very unhelpful message with garbage-looking section index. This patch detects special section cases and gives more explicit error message. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-23libbpf: fix using uninitialized ioctl resultsIlya Maximets1-4/+3
'channels.max_combined' initialized only on ioctl success and errno is only valid on ioctl failure. The code doesn't produce any runtime issues, but makes memory sanitizers angry: Conditional jump or move depends on uninitialised value(s) at 0x55C056F: xsk_get_max_queues (xsk.c:336) by 0x55C05B2: xsk_create_bpf_maps (xsk.c:354) by 0x55C089F: xsk_setup_xdp_prog (xsk.c:447) by 0x55C0E57: xsk_socket__create (xsk.c:601) Uninitialised value was created by a stack allocation at 0x55C04CD: xsk_get_max_queues (xsk.c:318) Additionally fixed warning on uninitialized bytes in ioctl arguments: Syscall param ioctl(SIOCETHTOOL) points to uninitialised byte(s) at 0x648D45B: ioctl (in /usr/lib64/libc-2.28.so) by 0x55C0546: xsk_get_max_queues (xsk.c:330) by 0x55C05B2: xsk_create_bpf_maps (xsk.c:354) by 0x55C089F: xsk_setup_xdp_prog (xsk.c:447) by 0x55C0E57: xsk_socket__create (xsk.c:601) Address 0x1ffefff378 is on thread 1's stack in frame #1, created by xsk_get_max_queues (xsk.c:318) Uninitialised value was created by a stack allocation at 0x55C04CD: xsk_get_max_queues (xsk.c:318) CC: Magnus Karlsson <magnus.karlsson@intel.com> Fixes: 1cad07884239 ("libbpf: add support for using AF_XDP sockets") Signed-off-by: Ilya Maximets <i.maximets@samsung.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-22libbpf: Avoid designated initializers for unnamed union membersArnaldo Carvalho de Melo1-7/+7
As it fails to build in some systems with: libbpf.c: In function 'perf_buffer__new': libbpf.c:4515: error: unknown field 'sample_period' specified in initializer libbpf.c:4516: error: unknown field 'wakeup_events' specified in initializer Doing as: attr.sample_period = 1; I.e. not as a designated initializer makes it build everywhere. Cc: Andrii Nakryiko <andriin@fb.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: fb84b8224655 ("libbpf: add perf buffer API") Link: https://lkml.kernel.org/n/tip-hnlmch8qit1ieksfppmr32si@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-22libbpf: Fix endianness macro usage for some compilersArnaldo Carvalho de Melo2-4/+6
Using endian.h and its endianness macros makes this code build in a wider range of compilers, as some don't have those macros (__BYTE_ORDER__, __ORDER_LITTLE_ENDIAN__, __ORDER_BIG_ENDIAN__), so use instead endian.h's macros (__BYTE_ORDER, __LITTLE_ENDIAN, __BIG_ENDIAN) which makes this code even shorter :-) Acked-by: Andrii Nakryiko <andriin@fb.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: 12ef5634a855 ("libbpf: simplify endianness check") Fixes: e6c64855fd7a ("libbpf: add btf__parse_elf API to load .BTF and .BTF.ext") Link: https://lkml.kernel.org/n/tip-eep5n8vgwcdphw3uc058k03u@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>