Age | Commit message (Collapse) | Author | Files | Lines |
|
Permissions are necessary to get a tracepoint id. Fail the test when the
read fails.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210114180250.3853825-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
If a test fails return -1 rather than 0. This is consistent with the
return value in test-cpumap.c
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210114180250.3853825-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The variable 'bf' is read (for a write call) without being initialized
triggering a memory sanitizer warning. Use 'bf' in the read and switch
the write to reading from a string.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210114212304.4018119-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up fixes and check what UAPI headers need to be synched.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-12-14
1) Expose bpf_sk_storage_*() helpers to iterator programs, from Florent Revest.
2) Add AF_XDP selftests based on veth devs to BPF selftests, from Weqaar Janjua.
3) Support for finding BTF based kernel attach targets through libbpf's
bpf_program__set_attach_target() API, from Andrii Nakryiko.
4) Permit pointers on stack for helper calls in the verifier, from Yonghong Song.
5) Fix overflows in hash map elem size after rlimit removal, from Eric Dumazet.
6) Get rid of direct invocation of llc in BPF selftests, from Andrew Delgadillo.
7) Fix xsk_recvmsg() to reorder socket state check before access, from Björn Töpel.
8) Add new libbpf API helper to retrieve ring buffer epoll fd, from Brendan Jackman.
9) Batch of minor BPF selftest improvements all over the place, from Florian Lehner,
KP Singh, Jiri Olsa and various others.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (31 commits)
selftests/bpf: Add a test for ptr_to_map_value on stack for helper access
bpf: Permits pointers on stack for helper calls
libbpf: Expose libbpf ring_buffer epoll_fd
selftests/bpf: Add set_attach_target() API selftest for module target
libbpf: Support modules in bpf_program__set_attach_target() API
selftests/bpf: Silence ima_setup.sh when not running in verbose mode.
selftests/bpf: Drop the need for LLVM's llc
selftests/bpf: fix bpf_testmod.ko recompilation logic
samples/bpf: Fix possible hang in xdpsock with multiple threads
selftests/bpf: Make selftest compilation work on clang 11
selftests/bpf: Xsk selftests - adding xdpxceiver to .gitignore
selftests/bpf: Drop tcp-{client,server}.py from Makefile
selftests/bpf: Xsk selftests - Bi-directional Sockets - SKB, DRV
selftests/bpf: Xsk selftests - Socket Teardown - SKB, DRV
selftests/bpf: Xsk selftests - DRV POLL, NOPOLL
selftests/bpf: Xsk selftests - SKB POLL, NOPOLL
selftests/bpf: Xsk selftests framework
bpf: Only provide bpf_sock_from_file with CONFIG_NET
bpf: Return -ENOTSUPP when attaching to non-kernel BTF
xsk: Validate socket state in xsk_recvmsg, prior touching socket members
...
====================
Link: https://lore.kernel.org/r/20201214214316.20642-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This provides a convenient perf ringbuf -> libbpf ringbuf migration
path for users of external polling systems. It is analogous to
perf_buffer__epoll_fd.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201214113812.305274-1-jackmanb@google.com
|
|
Support finding kernel targets in kernel modules when using
bpf_program__set_attach_target() API. This brings it up to par with what
libbpf supports when doing declarative SEC()-based target determination.
Some minor internal refactoring was needed to make sure vmlinux BTF can be
loaded before bpf_object's load phase.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20201211215825.3646154-2-andrii@kernel.org
|
|
xdp_return_frame_bulk() needs to pass a xdp_buff
to __xdp_return().
strlcpy got converted to strscpy but here it makes no
functional difference, so just keep the right code.
Conflicts:
net/netfilter/nf_tables_api.c
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-12-03
The main changes are:
1) Support BTF in kernel modules, from Andrii.
2) Introduce preferred busy-polling, from Björn.
3) bpf_ima_inode_hash() and bpf_bprm_opts_set() helpers, from KP Singh.
4) Memcg-based memory accounting for bpf objects, from Roman.
5) Allow bpf_{s,g}etsockopt from cgroup bind{4,6} hooks, from Stanislav.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (118 commits)
selftests/bpf: Fix invalid use of strncat in test_sockmap
libbpf: Use memcpy instead of strncpy to please GCC
selftests/bpf: Add fentry/fexit/fmod_ret selftest for kernel module
selftests/bpf: Add tp_btf CO-RE reloc test for modules
libbpf: Support attachment of BPF tracing programs to kernel modules
libbpf: Factor out low-level BPF program loading helper
bpf: Allow to specify kernel module BTFs when attaching BPF programs
bpf: Remove hard-coded btf_vmlinux assumption from BPF verifier
selftests/bpf: Add CO-RE relocs selftest relying on kernel module BTF
selftests/bpf: Add support for marking sub-tests as skipped
selftests/bpf: Add bpf_testmod kernel module for testing
libbpf: Add kernel module BTF support for CO-RE relocations
libbpf: Refactor CO-RE relocs to not assume a single BTF object
libbpf: Add internal helper to load BTF data by FD
bpf: Keep module's btf_data_size intact after load
bpf: Fix bpf_put_raw_tracepoint()'s use of __module_address()
selftests/bpf: Add Userspace tests for TCP_WINDOW_CLAMP
bpf: Adds support for setting window clamp
samples/bpf: Fix spelling mistake "recieving" -> "receiving"
bpf: Fix cold build of test_progs-no_alu32
...
====================
Link: https://lore.kernel.org/r/20201204021936.85653-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some versions of GCC are really nit-picky about strncpy() use. Use memcpy(),
as they are pretty much equivalent for the case of fixed length strings.
Fixes: e459f49b4394 ("libbpf: Separate XDP program load with xsk socket creation")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203235440.2302137-1-andrii@kernel.org
|
|
Teach libbpf to search for BTF types in kernel modules for tracing BPF
programs. This allows attachment of raw_tp/fentry/fexit/fmod_ret/etc BPF
program types to tracepoints and functions in kernel modules.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-13-andrii@kernel.org
|
|
Refactor low-level API for BPF program loading to not rely on public API
types. This allows painless extension without constant efforts to cleverly not
break backwards compatibility.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-12-andrii@kernel.org
|
|
Teach libbpf to search for candidate types for CO-RE relocations across kernel
modules BTFs, in addition to vmlinux BTF. If at least one candidate type is
found in vmlinux BTF, kernel module BTFs are not iterated. If vmlinux BTF has
no matching candidates, then find all kernel module BTFs and search for all
matching candidates across all of them.
Kernel's support for module BTFs are inferred from the support for BTF name
pointer in BPF UAPI.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-6-andrii@kernel.org
|
|
Refactor CO-RE relocation candidate search to not expect a single BTF, rather
return all candidate types with their corresponding BTF objects. This will
allow to extend CO-RE relocations to accommodate kernel module BTFs.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-5-andrii@kernel.org
|
|
Add a btf_get_from_fd() helper, which constructs struct btf from in-kernel BTF
data by FD. This is used for loading module BTFs.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-4-andrii@kernel.org
|
|
I've seen a situation, where a process that's under pprof constantly
generates SIGPROF which prevents program loading indefinitely.
The right thing to do probably is to disable signals in the upper
layers while loading, but it still would be nice to get some error from
libbpf instead of an endless loop.
Let's add some small retry limit to the program loading:
try loading the program 5 (arbitrary) times and give up.
v2:
* 10 -> 5 retires (Andrii Nakryiko)
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201202231332.3923644-1-sdf@google.com
|
|
When we added sanitising of map names before loading programs to libbpf, we
still allowed periods in the name. While the kernel will accept these for
the map names themselves, they are not allowed in file names when pinning
maps. This means that bpf_object__pin_maps() will fail if called on an
object that contains internal maps (such as sections .rodata).
Fix this by replacing periods with underscores when constructing map pin
paths. This only affects the paths generated by libbpf when
bpf_object__pin_maps() is called with a path argument. Any pin paths set
by bpf_map__set_pin_path() are unaffected, and it will still be up to the
caller to avoid invalid characters in those.
Fixes: 113e6b7e15e2 ("libbpf: Sanitise internal map names so they are not rejected by the kernel")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201203093306.107676-1-toke@redhat.com
|
|
Before this patch, a program with unspecified type
(BPF_PROG_TYPE_UNSPEC) would be passed to the BPF syscall, only to have
the kernel reject it with an opaque invalid argument error. This patch
makes libbpf reject such programs with a nicer error message - in
particular libbpf now tries to diagnose bad ELF section names at both
open time and load time.
Signed-off-by: Andrei Matei <andreimatei1@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201203043410.59699-1-andreimatei1@gmail.com
|
|
Add support for separation of eBPF program load and xsk socket
creation.
This is needed for use-case when you want to privide as little
privileges as possible to the data plane application that will
handle xsk socket creation and incoming traffic.
With this patch the data entity container can be run with only
CAP_NET_RAW capability to fulfill its purpose of creating xsk
socket and handling packages. In case your umem is larger or
equal process limit for MEMLOCK you need either increase the
limit or CAP_IPC_LOCK capability.
To resolve privileges issue two APIs are introduced:
- xsk_setup_xdp_prog - loads the built in XDP program. It can
also return xsks_map_fd which is needed by unprivileged process
to update xsks_map with AF_XDP socket "fd"
- xsk_socket__update_xskmap - inserts an AF_XDP socket into an xskmap
for a particular xsk_socket
Signed-off-by: Mariusz Dudek <mariuszx.dudek@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20201203090546.11976-2-mariuszx.dudek@intel.com
|
|
Add ability to get base BTF. It can be also used to check if BTF is split BTF.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201202065244.530571-3-andrii@kernel.org
|
|
Fix ring_buffer__poll() to return the number of non-discarded records
consumed, just like its documentation states. It's also consistent with
ring_buffer__consume() return. Fix up selftests with wrong expected results.
Fixes: bf99c936f947 ("libbpf: Add BPF ring buffer support")
Fixes: cb1c9ddd5525 ("selftests/bpf: Add BPF ringbuf selftests")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201130223336.904192-1-andrii@kernel.org
|
|
To pick up fixes.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Replace size_t with __u32 in the xsk interfaces that contain this.
There is no reason to have size_t since the internal variable that
is manipulated is a __u32. The following APIs are affected:
__u32 xsk_ring_prod__reserve(struct xsk_ring_prod *prod, __u32 nb, __u32 *idx)
void xsk_ring_prod__submit(struct xsk_ring_prod *prod, __u32 nb)
__u32 xsk_ring_cons__peek(struct xsk_ring_cons *cons, __u32 nb, __u32 *idx)
void xsk_ring_cons__cancel(struct xsk_ring_cons *cons, __u32 nb)
void xsk_ring_cons__release(struct xsk_ring_cons *cons, __u32 nb)
The "nb" variable and the return values have been changed from size_t
to __u32.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/1606383455-8243-1-git-send-email-magnus.karlsson@gmail.com
|
|
We'll use it to check for undefined/zero data.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201126170026.2619053-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a new function for returning descriptors the user received
after an xsk_ring_cons__peek call. After the application has
gotten a number of descriptors from a ring, it might not be able
to or want to process them all for various reasons. Therefore,
it would be useful to have an interface for returning or
cancelling a number of them so that they are returned to the ring.
This patch adds a new function called xsk_ring_cons__cancel that
performs this operation on nb descriptors counted from the end of
the batch of descriptors that was received through the peek call.
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
[ Magnus Karlsson: rewrote changelog ]
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/1606202474-8119-1-git-send-email-lirongqing@baidu.com
|
|
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We remove "other info" from "readelf -s --wide" output when
parsing GLOBAL_SYM_COUNT variable, which was added in [1].
But we don't do that for VERSIONED_SYM_COUNT and it's failing
the check_abi target on powerpc Fedora 33.
The extra "other info" wasn't problem for VERSIONED_SYM_COUNT
parsing until commit [2] added awk in the pipe, which assumes
that the last column is symbol, but it can be "other info".
Adding "other info" removal for VERSIONED_SYM_COUNT the same
way as we did for GLOBAL_SYM_COUNT parsing.
[1] aa915931ac3e ("libbpf: Fix readelf output parsing for Fedora")
[2] 746f534a4809 ("tools/libbpf: Avoid counting local symbols in ABI check")
Fixes: 746f534a4809 ("tools/libbpf: Avoid counting local symbols in ABI check")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201118211350.1493421-1-jolsa@kernel.org
|
|
When operating on split BTF, btf__find_by_name[_kind] will not
iterate over all types since they use btf->nr_types to show
the number of types to iterate over. For split BTF this is
the number of types _on top of base BTF_, so it will
underestimate the number of types to iterate over, especially
for vmlinux + module BTF, where the latter is much smaller.
Use btf__get_nr_types() instead.
Fixes: ba451366bf44 ("libbpf: Implement basic split BTF support")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1605437195-2175-1-git-send-email-alan.maguire@oracle.com
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-11-14
1) Add BTF generation for kernel modules and extend BTF infra in kernel
e.g. support for split BTF loading and validation, from Andrii Nakryiko.
2) Support for pointers beyond pkt_end to recognize LLVM generated patterns
on inlined branch conditions, from Alexei Starovoitov.
3) Implements bpf_local_storage for task_struct for BPF LSM, from KP Singh.
4) Enable FENTRY/FEXIT/RAW_TP tracing program to use the bpf_sk_storage
infra, from Martin KaFai Lau.
5) Add XDP bulk APIs that introduce a defer/flush mechanism to optimize the
XDP_REDIRECT path, from Lorenzo Bianconi.
6) Fix a potential (although rather theoretical) deadlock of hashtab in NMI
context, from Song Liu.
7) Fixes for cross and out-of-tree build of bpftool and runqslower allowing build
for different target archs on same source tree, from Jean-Philippe Brucker.
8) Fix error path in htab_map_alloc() triggered from syzbot, from Eric Dumazet.
9) Move functionality from test_tcpbpf_user into the test_progs framework so it
can run in BPF CI, from Alexander Duyck.
10) Lift hashtab key_size limit to be larger than MAX_BPF_STACK, from Florian Lehner.
Note that for the fix from Song we have seen a sparse report on context
imbalance which requires changes in sparse itself for proper annotation
detection where this is currently being discussed on linux-sparse among
developers [0]. Once we have more clarification/guidance after their fix,
Song will follow-up.
[0] https://lore.kernel.org/linux-sparse/CAHk-=wh4bx8A8dHnX612MsDO13st6uzAz1mJ1PaHHVevJx_ZCw@mail.gmail.com/T/
https://lore.kernel.org/linux-sparse/20201109221345.uklbp3lzgq6g42zb@ltop.local/T/
* git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (66 commits)
net: mlx5: Add xdp tx return bulking support
net: mvpp2: Add xdp tx return bulking support
net: mvneta: Add xdp tx return bulking support
net: page_pool: Add bulk support for ptr_ring
net: xdp: Introduce bulking for xdp tx return path
bpf: Expose bpf_d_path helper to sleepable LSM hooks
bpf: Augment the set of sleepable LSM hooks
bpf: selftest: Use bpf_sk_storage in FENTRY/FEXIT/RAW_TP
bpf: Allow using bpf_sk_storage in FENTRY/FEXIT/RAW_TP
bpf: Rename some functions in bpf_sk_storage
bpf: Folding omem_charge() into sk_storage_charge()
selftests/bpf: Add asm tests for pkt vs pkt_end comparison.
selftests/bpf: Add skb_pkt_end test
bpf: Support for pointers beyond pkt_end.
tools/bpf: Always run the *-clean recipes
tools/bpf: Add bootstrap/ to .gitignore
bpf: Fix NULL dereference in bpf_task_storage
tools/bpftool: Fix build slowdown
tools/runqslower: Build bpftool using HOSTCC
tools/runqslower: Enable out-of-tree build
...
====================
Link: https://lore.kernel.org/r/20201114020819.29584-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If BPF code contains unused BPF subprogram and there are no other subprogram
calls (which can realistically happen in real-world applications given
sufficiently smart Clang code optimizations), libbpf will erroneously assume
that subprograms are entry-point programs and will attempt to load them with
UNSPEC program type.
Fix by not relying on subcall instructions and rather detect it based on the
structure of BPF object's sections.
Fixes: 9a94f277c4fb ("tools: libbpf: restore the ability to load programs from .text section")
Reported-by: Dmitrii Banshchikov <dbanschikov@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20201107000251.256821-1-andrii@kernel.org
|
|
Updates the bpf_probe_map_type API to also support
BPF_MAP_TYPE_TASK_STORAGE similar to other local storage maps.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20201106103747.2780972-4-kpsingh@chromium.org
|
|
In some cases compiler seems to generate distinct DWARF types for identical
arrays within the same CU. That seems like a bug, but it's already out there
and breaks type graph equivalence checks, so accommodate it anyway by checking
for identical arrays, regardless of their type ID.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201105043402.2530976-10-andrii@kernel.org
|
|
Add support for deduplication split BTFs. When deduplicating split BTF, base
BTF is considered to be immutable and can't be modified or adjusted. 99% of
BTF deduplication logic is left intact (module some type numbering adjustments).
There are only two differences.
First, each type in base BTF gets hashed (expect VAR and DATASEC, of course,
those are always considered to be self-canonical instances) and added into
a table of canonical table candidates. Hashing is a shallow, fast operation,
so mostly eliminates the overhead of having entire base BTF to be a part of
BTF dedup.
Second difference is very critical and subtle. While deduplicating split BTF
types, it is possible to discover that one of immutable base BTF BTF_KIND_FWD
types can and should be resolved to a full STRUCT/UNION type from the split
BTF part. This is, obviously, can't happen because we can't modify the base
BTF types anymore. So because of that, any type in split BTF that directly or
indirectly references that newly-to-be-resolved FWD type can't be considered
to be equivalent to the corresponding canonical types in base BTF, because
that would result in a loss of type resolution information. So in such case,
split BTF types will be deduplicated separately and will cause some
duplication of type information, which is unavoidable.
With those two changes, the rest of the algorithm manages to deduplicate split
BTF correctly, pointing all the duplicates to their canonical counter-parts in
base BTF, but also is deduplicating whatever unique types are present in split
BTF on their own.
Also, theoretically, split BTF after deduplication could end up with either
empty type section or empty string section. This is handled by libbpf
correctly in one of previous patches in the series.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201105043402.2530976-9-andrii@kernel.org
|
|
Make data section layout checks stricter, disallowing overlap of types and
strings data.
Additionally, allow BTFs with no type data. There is nothing inherently wrong
with having BTF with no types (put potentially with some strings). This could
be a situation with kernel module BTFs, if module doesn't introduce any new
type information.
Also fix invalid offset alignment check for btf->hdr->type_off.
Fixes: 8a138aed4a80 ("bpf: btf: Add BTF support to libbpf")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201105043402.2530976-8-andrii@kernel.org
|
|
Support split BTF operation, in which one BTF (base BTF) provides basic set of
types and strings, while another one (split BTF) builds on top of base's types
and strings and adds its own new types and strings. From API standpoint, the
fact that the split BTF is built on top of the base BTF is transparent.
Type numeration is transparent. If the base BTF had last type ID #N, then all
types in the split BTF start at type ID N+1. Any type in split BTF can
reference base BTF types, but not vice versa. Programmatically construction of
a split BTF on top of a base BTF is supported: one can create an empty split
BTF with btf__new_empty_split() and pass base BTF as an input, or pass raw
binary data to btf__new_split(), or use btf__parse_xxx_split() variants to get
initial set of split types/strings from the ELF file with .BTF section.
String offsets are similarly transparent and are a logical continuation of
base BTF's strings. When building BTF programmatically and adding a new string
(explicitly with btf__add_str() or implicitly through appending new
types/members), string-to-be-added would first be looked up from the base
BTF's string section and re-used if it's there. If not, it will be looked up
and/or added to the split BTF string section. Similarly to type IDs, types in
split BTF can refer to strings from base BTF absolutely transparently (but not
vice versa, of course, because base BTF doesn't "know" about existence of
split BTF).
Internal type index is slightly adjusted to be zero-indexed, ignoring a fake
[0] VOID type. This allows to handle split/base BTF type lookups transparently
by using btf->start_id type ID offset, which is always 1 for base/non-split
BTF and equals btf__get_nr_types(base_btf) + 1 for the split BTF.
BTF deduplication is not yet supported for split BTF and support for it will
be added in separate patch.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201105043402.2530976-5-andrii@kernel.org
|
|
Revamp BTF dedup's string deduplication to match the approach of writable BTF
string management. This allows to transfer deduplicated strings index back to
BTF object after deduplication without expensive extra memory copying and hash
map re-construction. It also simplifies the code and speeds it up, because
hashmap-based string deduplication is faster than sort + unique approach.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201105043402.2530976-4-andrii@kernel.org
|
|
Factor out commiting of appended type data. Also extract fetching the very
last type in the BTF (to append members to). These two operations are common
across many APIs and will be easier to refactor with split BTF, if they are
extracted into a single place.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201105043402.2530976-2-andrii@kernel.org
|
|
Fix a possible use after free in xsk_socket__delete that will happen
if xsk_put_ctx() frees the ctx. To fix, save the umem reference taken
from the context and just use that instead.
Fixes: 2f6324a3937f ("libbpf: Support shared umems between queues and devices")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1604396490-12129-3-git-send-email-magnus.karlsson@gmail.com
|
|
Fix a possible null pointer dereference in xsk_socket__delete that
will occur if a null pointer is fed into the function.
Fixes: 2f6324a3937f ("libbpf: Support shared umems between queues and devices")
Reported-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1604396490-12129-2-git-send-email-magnus.karlsson@gmail.com
|
|
If bits is 0, the case when the map is empty, then the >> is the size of
the register which is undefined behavior - on x86 it is the same as a
shift by 0.
Fix by handling the 0 case explicitly and guarding calls to hash_bits for
empty maps in hashmap__for_each_key_entry and hashmap__for_each_entry_safe.
Fixes: e3b924224028 ("libbpf: add resizable non-thread safe internal hashmap")
Suggested-by: Andrii Nakryiko <andriin@fb.com>,
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201029223707.494059-1-irogers@google.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Cross-tree/merge window issues:
- rtl8150: don't incorrectly assign random MAC addresses; fix late in
the 5.9 cycle started depending on a return code from a function
which changed with the 5.10 PR from the usb subsystem
Current release regressions:
- Revert "virtio-net: ethtool configurable RXCSUM", it was causing
crashes at probe when control vq was not negotiated/available
Previous release regressions:
- ixgbe: fix probing of multi-port 10 Gigabit Intel NICs with an MDIO
bus, only first device would be probed correctly
- nexthop: Fix performance regression in nexthop deletion by
effectively switching from recently added synchronize_rcu() to
synchronize_rcu_expedited()
- netsec: ignore 'phy-mode' device property on ACPI systems; the
property is not populated correctly by the firmware, but firmware
configures the PHY so just keep boot settings
Previous releases - always broken:
- tcp: fix to update snd_wl1 in bulk receiver fast path, addressing
bulk transfers getting "stuck"
- icmp: randomize the global rate limiter to prevent attackers from
getting useful signal
- r8169: fix operation under forced interrupt threading, make the
driver always use hard irqs, even on RT, given the handler is light
and only wants to schedule napi (and do so through a _irqoff()
variant, preferably)
- bpf: Enforce pointer id generation for all may-be-null register
type to avoid pointers erroneously getting marked as null-checked
- tipc: re-configure queue limit for broadcast link
- net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN
tunnels
- fix various issues in chelsio inline tls driver
Misc:
- bpf: improve just-added bpf_redirect_neigh() helper api to support
supplying nexthop by the caller - in case BPF program has already
done a lookup we can avoid doing another one
- remove unnecessary break statements
- make MCTCP not select IPV6, but rather depend on it"
* tag 'net-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
tcp: fix to update snd_wl1 in bulk receiver fast path
net: Properly typecast int values to set sk_max_pacing_rate
netfilter: nf_fwd_netdev: clear timestamp in forwarding path
ibmvnic: save changed mac address to adapter->mac_addr
selftests: mptcp: depends on built-in IPv6
Revert "virtio-net: ethtool configurable RXCSUM"
rtnetlink: fix data overflow in rtnl_calcit()
net: ethernet: mtk-star-emac: select REGMAP_MMIO
net: hdlc_raw_eth: Clear the IFF_TX_SKB_SHARING flag after calling ether_setup
net: hdlc: In hdlc_rcv, check to make sure dev is an HDLC device
bpf, libbpf: Guard bpf inline asm from bpf_tail_call_static
bpf, selftests: Extend test_tc_redirect to use modified bpf_redirect_neigh()
bpf: Fix bpf_redirect_neigh helper api to support supplying nexthop
mptcp: depends on IPV6 but not as a module
sfc: move initialisation of efx->filter_sem to efx_init_struct()
mpls: load mpls_gso after mpls_iptunnel
net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN tunnels
net/sched: act_gate: Unlock ->tcfa_lock in tc_setup_flow_action()
net: dsa: bcm_sf2: make const array static, makes object smaller
mptcp: MPTCP_IPV6 should depend on IPV6 instead of selecting it
...
|
|
Yaniv reported a compilation error after pulling latest libbpf:
[...]
../libbpf/src/root/usr/include/bpf/bpf_helpers.h:99:10: error:
unknown register name 'r0' in asm
: "r0", "r1", "r2", "r3", "r4", "r5");
[...]
The issue got triggered given Yaniv was compiling tracing programs with native
target (e.g. x86) instead of BPF target, hence no BTF generated vmlinux.h nor
CO-RE used, and later llc with -march=bpf was invoked to compile from LLVM IR
to BPF object file. Given that clang was expecting x86 inline asm and not BPF
one the error complained that these regs don't exist on the former.
Guard bpf_tail_call_static() with defined(__bpf__) where BPF inline asm is valid
to use. BPF tracing programs on more modern kernels use BPF target anyway and
thus the bpf_tail_call_static() function will be available for them. BPF inline
asm is supported since clang 7 (clang <= 6 otherwise throws same above error),
and __bpf_unreachable() since clang 8, therefore include the latter condition
in order to prevent compilation errors for older clang versions. Given even an
old Ubuntu 18.04 LTS has official LLVM packages all the way up to llvm-10, I did
not bother to special case the __bpf_unreachable() inside bpf_tail_call_static()
further.
Also, undo the sockex3_kern's use of bpf_tail_call_static() sample given they
still have the old hacky way to even compile networking progs with native instead
of BPF target so bpf_tail_call_static() won't be defined there anymore.
Fixes: 0e9f6841f664 ("bpf, libbpf: Add bpf_tail_call_static helper for bpf programs")
Reported-by: Yaniv Agman <yanivagman@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Tested-by: Yaniv Agman <yanivagman@gmail.com>
Link: https://lore.kernel.org/bpf/CAMy7=ZUk08w5Gc2Z-EKi4JFtuUCaZYmE4yzhJjrExXpYKR4L8w@mail.gmail.com
Link: https://lore.kernel.org/bpf/20201021203257.26223-1-daniel@iogearbox.net
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools updates from Arnaldo Carvalho de Melo:
- cgroup improvements for 'perf stat', allowing for compact
specification of events and cgroups in the command line.
- Support per thread topdown metrics in 'perf stat'.
- Support sample-read topdown metric group in 'perf record'
- Show start of latency in addition to its start in 'perf sched
latency'.
- Add min, max to 'perf script' futex-contention output, in addition to
avg.
- Allow usage of 'perf_event_attr->exclusive' attribute via the new
':e' event modifier.
- Add 'snapshot' command to 'perf record --control', using it with
Intel PT.
- Support FIFO file names as alternative options to 'perf record
--control'.
- Introduce branch history "streams", to compare 'perf record' runs
with 'perf diff' based on branch records and report hot streams.
- Support PE executable symbol tables using libbfd, to profile, for
instance, wine binaries.
- Add filter support for option 'perf ftrace -F/--funcs'.
- Allow configuring the 'disassembler_style' 'perf annotate' knob via
'perf config'
- Update CascadelakeX and SkylakeX JSON vendor events files.
- Add support for parsing perchip/percore JSON vendor events.
- Add power9 hv_24x7 core level metric events.
- Add L2 prefetch, ITLB instruction fetch hits JSON events for AMD
zen1.
- Enable Family 19h users by matching Zen2 AMD vendor events.
- Use debuginfod in 'perf probe' when required debug files not found
locally.
- Display negative tid in non-sample events in 'perf script'.
- Make GTK2 support opt-in
- Add build test with GTK+
- Add missing -lzstd to the fast path feature detection
- Add scripts to auto generate 'mmap', 'mremap' string<->id tables for
use in 'perf trace'.
- Show python test script in verbose mode.
- Fix uncore metric expressions
- Msan uninitialized use fixes.
- Use condition variables in 'perf bench numa'
- Autodetect python3 binary in systems without python2.
- Support md5 build ids in addition to sha1.
- Add build id 'perf test' regression test.
- Fix printable strings in python3 scripts.
- Fix off by ones in 'perf trace' in arches using libaudit.
- Fix JSON event code for events referencing std arch events.
- Introduce 'perf test' shell script for Arm CoreSight testing.
- Add rdtsc() for Arm64 for used in the PERF_RECORD_TIME_CONV metadata
event and in 'perf test tsc'.
- 'perf c2c' improvements: Add "RMT Load Hit" metric, "Total Stores",
fixes and documentation update.
- Fix usage of reloc_sym in 'perf probe' when using both kallsyms and
debuginfo files.
- Do not print 'Metric Groups:' unnecessarily in 'perf list'
- Refcounting fixes in the event parsing code.
- Add expand cgroup event 'perf test' entry.
- Fix out of bounds CPU map access when handling armv8_pmu events in
'perf stat'.
- Add build-id injection 'perf bench' benchmark.
- Enter namespace when reading build-id in 'perf inject'.
- Do not load map/dso when injecting build-id speeding up the 'perf
inject' process.
- Add --buildid-all option to avoid processing all samples, just the
mmap metadata events.
- Add feature test to check if libbfd has buildid support
- Add 'perf test' entry for PE binary format support.
- Fix typos in power8 PMU vendor events JSON files.
- Hide libtraceevent non API functions.
* tag 'perf-tools-for-v5.10-2020-10-15' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (113 commits)
perf c2c: Update documentation for metrics reorganization
perf c2c: Add metrics "RMT Load Hit"
perf c2c: Correct LLC load hit metrics
perf c2c: Change header for LLC local hit
perf c2c: Use more explicit headers for HITM
perf c2c: Change header from "LLC Load Hitm" to "Load Hitm"
perf c2c: Organize metrics based on memory hierarchy
perf c2c: Display "Total Stores" as a standalone metrics
perf c2c: Display the total numbers continuously
perf bench: Use condition variables in numa.
perf jevents: Fix event code for events referencing std arch events
perf diff: Support hot streams comparison
perf streams: Report hot streams
perf streams: Calculate the sum of total streams hits
perf streams: Link stream pair
perf streams: Compare two streams
perf streams: Get the evsel_streams by evsel_idx
perf streams: Introduce branch history "streams"
perf intel-pt: Improve PT documentation slightly
perf tools: Add support for exclusive groups/events
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
- Add redirect_neigh() BPF packet redirect helper, allowing to limit
stack traversal in common container configs and improving TCP
back-pressure.
Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.
- Expand netlink policy support and improve policy export to user
space. (Ge)netlink core performs request validation according to
declared policies. Expand the expressiveness of those policies
(min/max length and bitmasks). Allow dumping policies for particular
commands. This is used for feature discovery by user space (instead
of kernel version parsing or trial and error).
- Support IGMPv3/MLDv2 multicast listener discovery protocols in
bridge.
- Allow more than 255 IPv4 multicast interfaces.
- Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
packets of TCPv6.
- In Multi-patch TCP (MPTCP) support concurrent transmission of data on
multiple subflows in a load balancing scenario. Enhance advertising
addresses via the RM_ADDR/ADD_ADDR options.
- Support SMC-Dv2 version of SMC, which enables multi-subnet
deployments.
- Allow more calls to same peer in RxRPC.
- Support two new Controller Area Network (CAN) protocols - CAN-FD and
ISO 15765-2:2016.
- Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
kernel problem.
- Add TC actions for implementing MPLS L2 VPNs.
- Improve nexthop code - e.g. handle various corner cases when nexthop
objects are removed from groups better, skip unnecessary
notifications and make it easier to offload nexthops into HW by
converting to a blocking notifier.
- Support adding and consuming TCP header options by BPF programs,
opening the doors for easy experimental and deployment-specific TCP
option use.
- Reorganize TCP congestion control (CC) initialization to simplify
life of TCP CC implemented in BPF.
- Add support for shipping BPF programs with the kernel and loading
them early on boot via the User Mode Driver mechanism, hence reusing
all the user space infra we have.
- Support sleepable BPF programs, initially targeting LSM and tracing.
- Add bpf_d_path() helper for returning full path for given 'struct
path'.
- Make bpf_tail_call compatible with bpf-to-bpf calls.
- Allow BPF programs to call map_update_elem on sockmaps.
- Add BPF Type Format (BTF) support for type and enum discovery, as
well as support for using BTF within the kernel itself (current use
is for pretty printing structures).
- Support listing and getting information about bpf_links via the bpf
syscall.
- Enhance kernel interfaces around NIC firmware update. Allow
specifying overwrite mask to control if settings etc. are reset
during update; report expected max time operation may take to users;
support firmware activation without machine reboot incl. limits of
how much impact reset may have (e.g. dropping link or not).
- Extend ethtool configuration interface to report IEEE-standard
counters, to limit the need for per-vendor logic in user space.
- Adopt or extend devlink use for debug, monitoring, fw update in many
drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx,
dpaa2-eth).
- In mlxsw expose critical and emergency SFP module temperature alarms.
Refactor port buffer handling to make the defaults more suitable and
support setting these values explicitly via the DCBNL interface.
- Add XDP support for Intel's igb driver.
- Support offloading TC flower classification and filtering rules to
mscc_ocelot switches.
- Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
fixed interval period pulse generator and one-step timestamping in
dpaa-eth.
- Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
offload.
- Add Lynx PHY/PCS MDIO module, and convert various drivers which have
this HW to use it. Convert mvpp2 to split PCS.
- Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
7-port Mediatek MT7531 IP.
- Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
and wcn3680 support in wcn36xx.
- Improve performance for packets which don't require much offloads on
recent Mellanox NICs by 20% by making multiple packets share a
descriptor entry.
- Move chelsio inline crypto drivers (for TLS and IPsec) from the
crypto subtree to drivers/net. Move MDIO drivers out of the phy
directory.
- Clean up a lot of W=1 warnings, reportedly the actively developed
subsections of networking drivers should now build W=1 warning free.
- Make sure drivers don't use in_interrupt() to dynamically adapt their
code. Convert tasklets to use new tasklet_setup API (sadly this
conversion is not yet complete).
* tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits)
Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH"
net, sockmap: Don't call bpf_prog_put() on NULL pointer
bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo
bpf, sockmap: Add locking annotations to iterator
netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements
net: fix pos incrementment in ipv6_route_seq_next
net/smc: fix invalid return code in smcd_new_buf_create()
net/smc: fix valid DMBE buffer sizes
net/smc: fix use-after-free of delayed events
bpfilter: Fix build error with CONFIG_BPFILTER_UMH
cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr
net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
bpf: Fix register equivalence tracking.
rxrpc: Fix loss of final ack on shutdown
rxrpc: Fix bundle counting for exclusive connections
netfilter: restore NF_INET_NUMHOOKS
ibmveth: Identify ingress large send packets.
ibmveth: Switch order of ibmveth_helper calls.
cxgb4: handle 4-tuple PEDIT to NAT mode translation
selftests: Add VRF route leaking tests
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
- a selftests harness fix to flush stdout before forking to avoid
parent and child printing duplicates messages. This is evident when
test output is redirected to a file.
- a tools/ wide change to avoid comma separated statements from Joe
Perches. This fix spans tools/lib, tools/power/cpupower, and
selftests.
* tag 'linux-kselftest-fixes-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
tools: Avoid comma separated statements
selftests/harness: Flush stdout before forking
|
|
We do not store size with build ids in perf data, but there's enough
space to do it. Adding misc bit PERF_RECORD_MISC_BUILD_ID_SIZE to mark
build id event with size.
With this fix the dso with md5 build id will have correct build id data
and will be usable for debuginfod processing if needed (coming in
following patches).
Committer notes:
Use %zu with size_t to fix this error on 32-bit arches:
util/header.c: In function '__event_process_build_id':
util/header.c:2105:3: error: format '%lu' expects argument of type 'long unsigned int', but argument 6 has type 'size_t' [-Werror=format=]
pr_debug("build id event received for %s: %s [%lu]\n",
^
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20201013192441.1299447-8-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick fixes that missed v5.9.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
There are internal library functions, which are not declared as a static.
They are used inside the library from different files. Hide them from
the library users, as they are not part of the API.
These functions are made hidden and are renamed without the prefix "tep_":
tep_free_plugin_paths
tep_peek_char
tep_buffer_init
tep_get_input_buf_ptr
tep_get_input_buf
tep_read_token
tep_free_token
tep_free_event
tep_free_format_field
__tep_parse_format
Link: https://lore.kernel.org/linux-trace-devel/e4afdd82deb5e023d53231bb13e08dca78085fb0.camel@decadent.org.uk/
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200930110733.280534-1-tz.stoyanov@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-10-12
The main changes are:
1) The BPF verifier improvements to track register allocation pattern, from Alexei and Yonghong.
2) libbpf relocation support for different size load/store, from Andrii.
3) bpf_redirect_peer() helper and support for inner map array with different max_entries, from Daniel.
4) BPF support for per-cpu variables, form Hao.
5) sockmap improvements, from John.
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use generalized BTF parsing logic, making it possible to parse BTF both from
ELF file, as well as a raw BTF dump. This makes it easier to write custom
tests with manually generated BTFs.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201008001025.292064-4-andrii@kernel.org
|