summaryrefslogtreecommitdiffstats
path: root/tools/kvm
AgeCommit message (Collapse)AuthorFilesLines
2017-06-27tools/kvm_stat: add new interactive command 'b'Stefan Raspl2-10/+79
Toggle display total number of events by guest (debugfs only). When switching to display of events by guest, field filters remain active. I.e. the number of events per guest reported considers only events matching the filters. Likewise with pid/guest filtering. Note that when switching to display of events by guest, DebugfsProvider remains to collect data for events as it did before, but the read() method summarizes the values by pid. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-27tools/kvm_stat: add new command line switch '-i'Stefan Raspl2-4/+34
It might be handy to display the full history of event stats to compare the current event distribution against any available historic data. Since we have that available for debugfs, we offer a respective command line option to display what's available. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-27tools/kvm_stat: fix error on interactive command 'g'Stefan Raspl1-1/+1
Fix an instance where print_all_gnames() is called without the mandatory argument, resulting in a stack trace. To reproduce, simply press 'g' in interactive mode. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-08tools/kvm_stat: display guest list in pid/guest selection screensStefan Raspl1-12/+37
Display a (possibly inaccurate) list of all running guests. Note that we leave a bit of extra room above the list for potential error messages. Furthermore, we deliberately do not reject pids or guest names that are not in our list, as we cannot rule out that our fuzzy approach might be in error somehow. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-08tools/kvm_stat: add new interactive command 'o'Stefan Raspl2-1/+18
Add new interactive command 'o' to toggle sorting by 'CurAvg/s' (default) and 'Total' columns. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-08tools/kvm_stat: add new interactive command 's'Stefan Raspl2-8/+49
Add new command 's' to modify the update interval. Limited to a maximum of 25.5 sec and a minimum of 0.1 sec, since curses cannot handle longer and shorter delays respectively. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-08tools/kvm_stat: add new interactive command 'h'Stefan Raspl2-5/+34
Display interactive commands reference on 'h'. While at it, sort interactive commands alphabetically in various places. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-08tools/kvm_stat: rename 'Current' column to 'CurAvg/s'Stefan Raspl1-3/+3
'Current' can be misleading as it doesn't tell whether this is the amount of events in the last interval or the current average per second. Note that this necessitates widening the respective column by one more character. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-08tools/kvm_stat: make heading look a bit more like 'top'Stefan Raspl1-1/+2
Print header in standout font just like the 'top' command does. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-08tools/kvm_stat: display message indicating lack of eventsStefan Raspl1-0/+2
Give users some indication on the reason why no data is displayed on the screen yet. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-08tools/kvm_stat: show cursor in selection screensStefan Raspl1-0/+6
Show the cursor in the interactive screens to specify pid, filter or guest name as an orientation for the user. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-08tools/kvm_stat: move functions to corresponding classesStefan Raspl1-162/+165
Quite a few of the functions are used only in a single class. Moving functions accordingly to improve the overall structure. Furthermore, introduce a base class for the providers, which might also come handy for future extensions. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-08tools/kvm_stat: simplify initializersStefan Raspl1-38/+36
Simplify a couple of initialization routines: * TracepointProvider and DebugfsProvider: Pass pid into __init__() instead of switching to the requested value in an extra call after initializing to the default first. * Pass a single options object into Stats.__init__(), delaying options evaluation accordingly, instead of evaluating options first and passing several parts of the options object to Stats.__init__() individually. * Eliminate Stats.update_provider_pid(), since this 2-line function is now used in a single place only. * Remove extra call to update_drilldown() in Tui.__init__() by getting the value of options.fields right initially when parsing options. * Simplify get_providers() logic. * Avoid duplicate fields initialization by handling it once in the providers' __init__() methods. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-08tools/kvm_stat: remove extra statementStefan Raspl1-1/+0
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-08tools/kvm_stat: removed unused functionStefan Raspl1-3/+0
Function available_fields() is not used in any place. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-08tools/kvm_stat: simplify line print logicStefan Raspl1-19/+7
Simplify line print logic for header and data lines in interactive mode as previously suggested by Radim. While at it, add a space between the first two columns to avoid the total bleeding into the event name. Furthermore, for column 'Current', differentiate between no events being reported (empty 'Current' column) vs the case where events were reported but the average was rounded down to zero ('0' in 'Current column), for the folks who appreciate the difference. Finally: Only skip events which were not reported at all yet, instead of events that don't have a value in the current interval. Considered using constants for the field widths in the format strings. However, that would make things a bit more complicated, and considering that there are only two places where output happens, I figured it isn't worth the trouble. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-08tools/kvm_stat: remove unnecessary header redrawsStefan Raspl1-2/+0
Certain interactive commands will not modify any information displayed in the header, hence we can skip them. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-08tools/kvm_stat: fix undue use of initial sleeptimeStefan Raspl1-3/+0
We should not use the initial sleeptime for any key press that does not switch to a different screen, as that introduces an unaesthetic flicker due to two updates in quick succession. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-08tools/kvm_stat: fix event counts display for interrupted intervalsStefan Raspl1-2/+5
When an update interval is interrupted via key press (e.g. space), the 'Current' column value is calculated using the full interval length instead of the elapsed time, which leads to lower than actual numbers. Furthermore, the value should be rounded, not truncated. This is fixed by using the actual elapsed time for the calculation. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-08tools/kvm_stat: fix typoStefan Raspl1-1/+1
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-29tools/kvm_stat: add '%Total' columnStefan Raspl1-1/+8
Add column '%Total' next to 'Total' for easier comparison of numbers between hosts. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-29tools/kvm_stat: add interactive command 'r'Stefan Raspl2-14/+53
Provide an interactive command to reset the tracepoint statistics. Requires some extra work for debugfs, as the counters cannot be reset. On the up side, this offers us the opportunity to have debugfs values reset on startup and whenever a filter is modified, becoming consistent with the tracepoint provider. As a bonus, 'kvmstat -dt' will now provide useful output, instead of mixing values in totally different orders of magnitude. Furthermore, we avoid unnecessary resets when any of the filters is "changed" interactively to the previous value. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Acked-by: Janosch Frank <frankja@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-29tools/kvm_stat: add interactive command 'c'Stefan Raspl2-4/+14
Provide a real simple way to erase any active filter. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-29tools/kvm_stat: add option '--guest'Stefan Raspl2-2/+105
Add a new option '-g'/'--guest' to select a particular process by providing the QEMU guest name. Notes: - The logic to figure out the pid corresponding to the guest name might look scary, but works pretty reliably in practice; in the unlikely event that it returns add'l flukes, it will bail out and hint at using '-p' instead, no harm done. - Mixing '-g' and '-p' is possible, and the final instance specified on the command line is the significant one. This is consistent with current behavior for '-p' which, if specified multiple times, also regards the final instance as the significant one. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-29tools/kvm_stat: remove regex filter on empty inputStefan Raspl1-0/+1
Behavior on empty/0 input for regex and pid filtering was inconsistent, as the former would keep the current filter, while the latter would (naturally) remove any pid filtering. Make things consistent by falling back to the default filter on empty input for the regex filter dialogue. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-29tools/kvm_stat: display regex when set to non-defaultStefan Raspl1-0/+6
If a user defines a regex filter through the interactive command, display the active regex in the header's second line. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-29tools/kvm_stat: print error messages on faulty pid filter inputStefan Raspl1-0/+4
Print helpful messages in case users enter invalid input or invalid pids in the interactive pid filter dialogue. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-29tools/kvm_stat: remove pid filter on empty inputStefan Raspl1-4/+7
Improve consistency in the interactive dialogue for pid filtering by removing any filters on empty input (in addition to entering 0). Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com> Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-29tools/kvm_stat: display guest name when using pid filterStefan Raspl1-2/+39
When running kvm_stat with option '-p' to filter per process, display the QEMU guest name next to the pid, if available. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Reviewed-By: Janosch Frank <frankja@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-29tools/kvm_stat: document list of interactive commandsStefan Raspl2-0/+23
Apart from the source code, there does not seem to be a place that documents the interactive capabilities of kvm_stat yet. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-29tools/kvm_stat: reduce perceived idle time on filter updatesStefan Raspl1-18/+30
Whenever a user adds a filter, we * redraw the header immediately for a snappy response * print a message indicating to the user that we're busy while the noticeable delay induced by updating all of the stats objects takes place * update the statistics ASAP (i.e. after 0.25s instead of 3s) to be consistent with behavior on startup To do so, we split the Tui's refresh() method to allow for drawing header and stats separately, and trigger a header refresh whenever we are about to do something that takes a while - like updating filters. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-29tools/kvm_stat: full PEP8 complianceStefan Raspl1-0/+22
Provides all missing empty lines as required for full PEP compliance. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-29tools/kvm_stat: fix trace setup glitch on field updates in TracepointProviderStefan Raspl1-2/+3
Updating the fields of the TracepointProvider does not propagate changes to the tracepoints. This shows when a pid filter is enabled, whereby subsequent extensions of the fields of the Tracepoint provider (e.g. by toggling drilldown) will not modify the tracepoints as required. To reproduce, select a specific process via interactive command 'p', and enable drilldown via 'x' - none of the fields with the braces will appear although they should. The fix will always leave all available fields in the TracepointProvider enabled. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Based-on-text-by: Janosch Frank <frankja@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-29tools/kvm_stat: fix misc glitchesStefan Raspl1-13/+11
Addresses - eliminate extra import - missing variable initialization - type redefinition from int to float - passing of int type argument instead of string - a couple of PEP8-reported indentation/formatting glitches - remove unused variable drilldown in class Tui Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-29tools/kvm_stat: handle SIGINT in log and batch modesStefan Raspl1-11/+17
SIGINT causes ugly unhandled exceptions in log and batch mode, which we prevent by catching the exceptions accordingly. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-29tools/kvm_stat: catch curses exceptions onlyStefan Raspl1-1/+1
The previous version was catching all exceptions, including SIGINT. We only want to catch the curses exceptions here. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com> Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-29tools/kvm_stat: hide cursorStefan Raspl1-0/+7
When running kvm_stat in interactive mode, the cursor appears at the lower left corner, which looks a bit distracting. This patch hides the cursor by turning it invisible. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Reviewed-By: Sascha Silbe <silbe@linux.vnet.ibm.com> Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2016-05-25tools: kvm_stat: Add commentsJanosch Frank1-2/+159
A lot of the code works with the perf events about which only sparse documentation was available until 2012. Having that information now, we can clarify what is done in the code. Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-25tools: kvm_stat: Introduce pid monitoringJanosch Frank2-22/+167
Having stats for single VMs can help to determine the problem of a VM without the need of running other tools like perf. The tracepoints already allowed pid level monitoring, but kvm_stat didn't have support for it till now. Support for the newly implemented debugfs vm monitoring was also implemented. Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-25tools: kvm_stat: Powerpc related fixesHemant Kumar1-0/+2
kvm_stat script is failing to execute on powerpc : # ./kvm_stat Traceback (most recent call last): File "./kvm_stat", line 825, in <module> main() File "./kvm_stat", line 813, in main providers = get_providers(options) File "./kvm_stat", line 778, in get_providers providers.append(TracepointProvider()) File "./kvm_stat", line 416, in __init__ self.filters = get_filters() File "./kvm_stat", line 315, in get_filters if ARCH.exit_reasons: AttributeError: 'ArchPPC' object has no attribute 'exit_reasons' This is because, its trying to access a non-defined attribute. Also, the IOCTL number of RESET is incorrect for powerpc. The correct number has been added. Signed-off-by: Hemant Kumar <hemant@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-25tools: Add kvm_stat man pagePaolo Bonzini2-2/+99
Converted from the Texinfo source in QEMU to asciidoc. The a2x incantation was provided by Janosch Frank. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-25tools: Add kvm_stat vm monitor scriptJanosch Frank2-0/+830
This tool displays kvm vm exit statistics to ease vm monitoring. It takes its data from the kvm debugfs files or the vm tracepoints and outputs them as a curses ui or simple text. It was moved from qemu, as it is dependent on the kernel whereas qemu works with a large number of kernel versions, some of which may break the script. Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-07 00:02:01 +0000