summaryrefslogtreecommitdiffstats
path: root/tools/build
AgeCommit message (Collapse)AuthorFilesLines
2018-12-21perf build: Don't unconditionally link the libbfd feature test to -liberty ↵Stanislav Fomichev2-7/+7
and -lz Current libbfd feature test unconditionally links against -liberty and -lz. While it's required on some systems (e.g. opensuse), it's completely unnecessary on the others, where only -lbdf is sufficient (debian). This patch streamlines (and renames) the following feature checks: feature-libbfd - only link against -lbfd (debian), see commit 2cf9040714f3 ("perf tools: Fix bfd dependency libraries detection") feature-libbfd-liberty - link against -lbfd and -liberty feature-libbfd-liberty-z - link against -lbfd, -liberty and -lz (opensuse), see commit 280e7c48c3b8 ("perf tools: fix BFD detection on opensuse") (feature-liberty{,-z} were renamed to feature-libbfd-liberty{,z} for clarity) The main motivation is to fix this feature test for bpftool which is currently broken on debian (libbfd feature shows OFF, but we still unconditionally link against -lbfd and it works). Tested on debian with only -lbfd installed (without -liberty); I'd appreciate if somebody on the other systems can test this new detection method. Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/4dfc634cfcfb236883971b5107cf3c28ec8a31be.1542328222.git.sdf@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-17perf cs-etm: Support for ARM A32/T32 instruction sets in CoreSight traceRobert Walker1-0/+8
This patch adds support for generating instruction samples from trace of AArch32 programs using the A32 and T32 instruction sets. T32 has variable 2 or 4 byte instruction size, so the conversion between addresses and instruction counts requires extra information from the trace decoder, requiring version 0.10.0 of OpenCSD. A check for the OpenCSD library version has been added to the feature check for OpenCSD. Signed-off-by: Robert Walker <robert.walker@arm.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1543839526-30348-1-git-send-email-robert.walker@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-17tools build feature: Check if libaio is availableAlexey Budankov4-3/+30
This will be used by 'perf record' to speed up reading the perf ring buffer. Committer testing: $ make -C tools/perf O=/tmp/build/perf make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j8' parallel build Auto-detecting system features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] ... gtk2: [ OFF ] ... libaudit: [ OFF ] ... libbfd: [ OFF ] ... libelf: [ on ] ... libnuma: [ OFF ] ... numa_num_possible_cpus: [ OFF ] ... libperl: [ OFF ] ... libpython: [ OFF ] ... libslang: [ on ] ... libcrypto: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... lzma: [ on ] ... get_cpuid: [ on ] ... bpf: [ on ] ... libaio: [ on ] $ ls -la /tmp/build/perf/feature/test-libaio.* -rwxrwxr-x. 1 acme acme 18296 Nov 26 08:49 /tmp/build/perf/feature/test-libaio.bin -rw-rw-r--. 1 acme acme 1165 Nov 26 08:49 /tmp/build/perf/feature/test-libaio.d -rw-rw-r--. 1 acme acme 0 Nov 26 08:49 /tmp/build/perf/feature/test-libaio.make.output $ $ grep -i aio /tmp/build/perf/FEATURE-DUMP feature-libaio=1 $ Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/5fcda10c-6c63-68df-383a-c6d9e5d1f918@linux.intel.com [ split from a larger patch ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-21perf jvmti: Separate jvmti cmlr checkJiri Olsa3-1/+15
The Compiled Method Load Record (cmlr) is JDK specific interface to access JVM stack info. This makes the jvmti agent code not compile under another jdk, which does not support that. Separating jvmti cmlr check into special feature check, and adding HAVE_JVMTI_CMLR macro to indicate that. Mark cmlr code in jvmti/libjvmti.c with HAVE_JVMTI_CMLR, so we can compile it on system without cmlr support. This change makes the jvmti compile with java-1.8.0-ibm package. It's without the line numbers support, but the rest works. Adding NO_JVMTI_CMLR compile variable for testing. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ben Gainey <ben.gainey@arm.com> Cc: Gustavo Luiz Duarte <gduarte@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20181121154341.21521-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-21tools build feature: Check if eventfd() is availableArnaldo Carvalho de Melo4-0/+19
A new 'perf bench epoll' will use this, and to disable it for older systems, add a feature test for this API. This is just a simple program that if successfully compiled, means that the feature is present, at least at the library level, in a build that sets the output directory to /tmp/build/perf (using O=/tmp/build/perf), we end up with: $ ls -la /tmp/build/perf/feature/test-eventfd* -rwxrwxr-x. 1 acme acme 8176 Nov 21 15:58 /tmp/build/perf/feature/test-eventfd.bin -rw-rw-r--. 1 acme acme 588 Nov 21 15:58 /tmp/build/perf/feature/test-eventfd.d -rw-rw-r--. 1 acme acme 0 Nov 21 15:58 /tmp/build/perf/feature/test-eventfd.make.output $ ldd /tmp/build/perf/feature/test-eventfd.bin linux-vdso.so.1 (0x00007fff3bf3f000) libc.so.6 => /lib64/libc.so.6 (0x00007fa984061000) /lib64/ld-linux-x86-64.so.2 (0x00007fa984417000) $ grep eventfd -A 2 -B 2 /tmp/build/perf/FEATURE-DUMP feature-dwarf=1 feature-dwarf_getlocations=1 feature-eventfd=1 feature-fortify-source=1 feature-sync-compare-and-swap=1 $ The main thing here is that in the end we'll have -DHAVE_EVENTFD in CFLAGS, and then the 'perf bench' entry needing that API can be selectively pruned. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: David Ahern <dsahern@gmail.com> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Jason Baron <jbaron@akamai.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-wkeldwob7dpx6jvtuzl8164k@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-19tools build feature: Check if get_current_dir_name() is availableArnaldo Carvalho de Melo4-0/+20
As the namespace support code will use this, which is not available in some non _GNU_SOURCE libraries such as Android's bionic used in my container build tests (r12b and r15c at the moment). Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-x56ypm940pwclwu45d7jfj47@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds3-0/+13
Pull networking updates from David Miller: "Highlights: - Gustavo A. R. Silva keeps working on the implicit switch fallthru changes. - Support 802.11ax High-Efficiency wireless in cfg80211 et al, From Luca Coelho. - Re-enable ASPM in r8169, from Kai-Heng Feng. - Add virtual XFRM interfaces, which avoids all of the limitations of existing IPSEC tunnels. From Steffen Klassert. - Convert GRO over to use a hash table, so that when we have many flows active we don't traverse a long list during accumluation. - Many new self tests for routing, TC, tunnels, etc. Too many contributors to mention them all, but I'm really happy to keep seeing this stuff. - Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu. - Lots of cleanups and fixes in L2TP code from Guillaume Nault. - Add IPSEC offload support to netdevsim, from Shannon Nelson. - Add support for slotting with non-uniform distribution to netem packet scheduler, from Yousuk Seung. - Add UDP GSO support to mlx5e, from Boris Pismenny. - Support offloading of Team LAG in NFP, from John Hurley. - Allow to configure TX queue selection based upon RX queue, from Amritha Nambiar. - Support ethtool ring size configuration in aquantia, from Anton Mikaev. - Support DSCP and flowlabel per-transport in SCTP, from Xin Long. - Support list based batching and stack traversal of SKBs, this is very exciting work. From Edward Cree. - Busyloop optimizations in vhost_net, from Toshiaki Makita. - Introduce the ETF qdisc, which allows time based transmissions. IGB can offload this in hardware. From Vinicius Costa Gomes. - Add parameter support to devlink, from Moshe Shemesh. - Several multiplication and division optimizations for BPF JIT in nfp driver, from Jiong Wang. - Lots of prepatory work to make more of the packet scheduler layer lockless, when possible, from Vlad Buslov. - Add ACK filter and NAT awareness to sch_cake packet scheduler, from Toke Høiland-Jørgensen. - Support regions and region snapshots in devlink, from Alex Vesker. - Allow to attach XDP programs to both HW and SW at the same time on a given device, with initial support in nfp. From Jakub Kicinski. - Add TLS RX offload and support in mlx5, from Ilya Lesokhin. - Use PHYLIB in r8169 driver, from Heiner Kallweit. - All sorts of changes to support Spectrum 2 in mlxsw driver, from Ido Schimmel. - PTP support in mv88e6xxx DSA driver, from Andrew Lunn. - Make TCP_USER_TIMEOUT socket option more accurate, from Jon Maxwell. - Support for templates in packet scheduler classifier, from Jiri Pirko. - IPV6 support in RDS, from Ka-Cheong Poon. - Native tproxy support in nf_tables, from Máté Eckl. - Maintain IP fragment queue in an rbtree, but optimize properly for in-order frags. From Peter Oskolkov. - Improvde handling of ACKs on hole repairs, from Yuchung Cheng" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits) bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT" hv/netvsc: Fix NULL dereference at single queue mode fallback net: filter: mark expected switch fall-through xen-netfront: fix warn message as irq device name has '/' cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0 net: dsa: mv88e6xxx: missing unlock on error path rds: fix building with IPV6=m inet/connection_sock: prefer _THIS_IP_ to current_text_addr net: dsa: mv88e6xxx: bitwise vs logical bug net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd() ieee802154: hwsim: using right kind of iteration net: hns3: Add vlan filter setting by ethtool command -K net: hns3: Set tx ring' tc info when netdev is up net: hns3: Remove tx ring BD len register in hns3_enet net: hns3: Fix desc num set to default when setting channel net: hns3: Fix for phy link issue when using marvell phy driver net: hns3: Fix for information of phydev lost problem when down/up net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero net: hns3: Add support for serdes loopback selftest bnxt_en: take coredump_record structure off stack ...
2018-07-20Merge ra.kernel.org:/pub/scm/linux/kernel/git/torvalds/linuxDavid S. Miller2-4/+4
All conflicts were trivial overlapping changes, so reasonably easy to resolve. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18kbuild: Rename HOSTLDFLAGS to KBUILD_HOSTLDFLAGSLaura Abbott1-1/+1
In preparation for enabling command line LDFLAGS, re-name HOSTLDFLAGS to KBUILD_HOSTLDFLAGS as the internal use only flags. This should not have any visible effects. Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-18kbuild: Rename HOSTCFLAGS to KBUILD_HOSTCFLAGSLaura Abbott1-1/+1
In preparation for enabling command line CFLAGS, re-name HOSTCFLAGS to KBUILD_HOSTCFLAGS as the internal use only flags. This should not have any visible effects. Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-14tools: include reallocarray feature test in FEATURE_TESTS_BASICJakub Kicinski1-0/+1
perf propagates its feature check results to libbpf. This means features for which perf probes must be a superset of libbpf's required features. perf depends on FEATURE_TESTS_BASIC for its list of features. commit 531b014e7a2f ("tools: bpf: make use of reallocarray") added reallocarray use to libbpf, make perf also perform the reallocarray feature check. Fixes: 531b014e7a2f ("tools: bpf: make use of reallocarray") Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-13tools: build: Use HOSTLDFLAGS with fixdepLaura Abbott1-1/+1
The final link of fixdep uses LDFLAGS but not the existing HOSTLDFLAGS. Fix this. Signed-off-by: Laura Abbott <labbott@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-13tools: build: Fixup host c flagsLaura Abbott1-1/+1
Commit 0c3b7e42616f ("tools build: Add support for host programs format") introduced host_c_flags which referenced CHOSTFLAGS. The actual name of the variable is HOSTCFLAGS. Fix this up. Fixes: 0c3b7e42616f ("tools build: Add support for host programs format") Signed-off-by: Laura Abbott <labbott@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-13tools build: fix # escaping in .cmd files for future MakePaul Menzel1-2/+2
In 2016 GNU Make made a backwards incompatible change to the way '#' characters were handled in Makefiles when used inside functions or macros: http://git.savannah.gnu.org/cgit/make.git/commit/?id=c6966b323811c37acedff05b57 Due to this change, when attempting to run `make prepare' I get a spurious make syntax error: /home/earnest/linux/tools/objtool/.fixdep.o.cmd:1: *** missing separator. Stop. When inspecting `.fixdep.o.cmd' it includes two lines which use unescaped comment characters at the top: \# cannot find fixdep (/home/earnest/linux/tools/objtool//fixdep) \# using basic dep data This is because `tools/build/Build.include' prints these '\#' characters: printf '\# cannot find fixdep (%s)\n' $(fixdep) > $(dot-target).cmd; \ printf '\# using basic dep data\n\n' >> $(dot-target).cmd; \ This completes commit 9564a8cf422d ("Kbuild: fix # escaping in .cmd files for future Make"). Link: https://bugzilla.kernel.org/show_bug.cgi?id=197847 Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: stable@vger.kernel.org Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-11tools: bpf: make use of reallocarrayJakub Kicinski2-0/+12
reallocarray() is a safer variant of realloc which checks for multiplication overflow in case of array allocation. Since it's not available in Glibc < 2.26 import kernel's overflow.h and add a static inline implementation when needed. Use feature detection to probe for existence of reallocarray. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-11Kbuild: fix # escaping in .cmd files for future MakeRasmus Villemoes1-2/+3
I tried building using a freshly built Make (4.2.1-69-g8a731d1), but already the objtool build broke with orc_dump.c: In function ‘orc_dump’: orc_dump.c:106:2: error: ‘elf_getshnum’ is deprecated [-Werror=deprecated-declarations] if (elf_getshdrnum(elf, &nr_sections)) { Turns out that with that new Make, the backslash was not removed, so cpp didn't see a #include directive, grep found nothing, and -DLIBELF_USE_DEPRECATED was wrongly put in CFLAGS. Now, that new Make behaviour is documented in their NEWS file: * WARNING: Backward-incompatibility! Number signs (#) appearing inside a macro reference or function invocation no longer introduce comments and should not be escaped with backslashes: thus a call such as: foo := $(shell echo '#') is legal. Previously the number sign needed to be escaped, for example: foo := $(shell echo '\#') Now this latter will resolve to "\#". If you want to write makefiles portable to both versions, assign the number sign to a variable: C := \# foo := $(shell echo '$C') This was claimed to be fixed in 3.81, but wasn't, for some reason. To detect this change search for 'nocomment' in the .FEATURES variable. This also fixes up the two make-cmd instances to replace # with $(pound) rather than with \#. There might very well be other places that need similar fixup in preparation for whatever future Make release contains the above change, but at least this builds an x86_64 defconfig with the new make. Link: https://bugzilla.kernel.org/show_bug.cgi?id=197847 Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-08perf build: Force llvm/clang test compile output to .make.outputJiri Olsa1-3/+6
So we can see the output of feature compile in following files: tools/build/feature/test-llvm.make.output tools/build/feature/test-llvm-version.make.output tools/build/feature/test-clang.make.output Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180307155020.32613-20-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-08perf build: Add llvm/clang make targets to FILESJiri Olsa1-1/+4
So they can follow the OUTPUT variable setup as the rest of the features. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180307155020.32613-19-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-08perf build: Add llvm/clang/cxx make tests into FEATURE_TESTS_EXTRAJiri Olsa1-1/+5
So we can see the status when we build perf, like: $ make LIBCLANGLLVM=1 VF=1 ... cxx: [ on ] ... llvm: [ on ] ... llvm-version: [ on ] ... clang: [ on ] Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180307155020.32613-18-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2-0/+19
Pull networking updates from David Miller: 1) Significantly shrink the core networking routing structures. Result of http://vger.kernel.org/~davem/seoul2017_netdev_keynote.pdf 2) Add netdevsim driver for testing various offloads, from Jakub Kicinski. 3) Support cross-chip FDB operations in DSA, from Vivien Didelot. 4) Add a 2nd listener hash table for TCP, similar to what was done for UDP. From Martin KaFai Lau. 5) Add eBPF based queue selection to tun, from Jason Wang. 6) Lockless qdisc support, from John Fastabend. 7) SCTP stream interleave support, from Xin Long. 8) Smoother TCP receive autotuning, from Eric Dumazet. 9) Lots of erspan tunneling enhancements, from William Tu. 10) Add true function call support to BPF, from Alexei Starovoitov. 11) Add explicit support for GRO HW offloading, from Michael Chan. 12) Support extack generation in more netlink subsystems. From Alexander Aring, Quentin Monnet, and Jakub Kicinski. 13) Add 1000BaseX, flow control, and EEE support to mvneta driver. From Russell King. 14) Add flow table abstraction to netfilter, from Pablo Neira Ayuso. 15) Many improvements and simplifications to the NFP driver bpf JIT, from Jakub Kicinski. 16) Support for ipv6 non-equal cost multipath routing, from Ido Schimmel. 17) Add resource abstration to devlink, from Arkadi Sharshevsky. 18) Packet scheduler classifier shared filter block support, from Jiri Pirko. 19) Avoid locking in act_csum, from Davide Caratti. 20) devinet_ioctl() simplifications from Al viro. 21) More TCP bpf improvements from Lawrence Brakmo. 22) Add support for onlink ipv6 route flag, similar to ipv4, from David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1925 commits) tls: Add support for encryption using async offload accelerator ip6mr: fix stale iterator net/sched: kconfig: Remove blank help texts openvswitch: meter: Use 64-bit arithmetic instead of 32-bit tcp_nv: fix potential integer overflow in tcpnv_acked r8169: fix RTL8168EP take too long to complete driver initialization. qmi_wwan: Add support for Quectel EP06 rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK ipmr: Fix ptrdiff_t print formatting ibmvnic: Wait for device response when changing MAC qlcnic: fix deadlock bug tcp: release sk_frag.page in tcp_disconnect ipv4: Get the address of interface correctly. net_sched: gen_estimator: fix lockdep splat net: macb: Handle HRESP error net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoring ipv6: addrconf: break critical section in addrconf_verify_rtnl() ipv6: change route cache aging logic i40e/i40evf: Update DESC_NEEDED value to reflect larger value bnxt_en: cleanup DIM work on device shutdown ...
2018-01-25perf tools: Integrating the CoreSight decoding libraryMathieu Poirier4-2/+21
The Open CoreSight Decoding Library (openCSD) is a free and open library to decode traces collected by the CoreSight hardware infrastructure. This patch adds the required mechanic to recognise the presence of the openCSD library on a system and set up miscellaneous flags to be used in the compilation of the trace decoding feature. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kim Phillips <kim.phillips@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Mike Leach <mike.leach@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Link: http://lkml.kernel.org/r/1516211539-5166-2-git-send-email-mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1516635644-24819-1-git-send-email-mathieu.poirier@linaro.org [ Merged missing test-libopencsd.c file, provided later by Mathieu ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-17tools: bpftool: add -DPACKAGE when including bfd.hJiong Wang1-1/+1
bfd.h is requiring including of config.h except when PACKAGE or PACKAGE_VERSION are defined. /* PR 14072: Ensure that config.h is included first. */ #if !defined PACKAGE && !defined PACKAGE_VERSION #error config.h must be included before this header #endif This check has been introduced since May-2012. It doesn't show up in bfd.h on some Linux distribution, probably because distributions have remove it when building the package. However, sometimes the user might just build libfd from source code then link bpftool against it. For this case, bfd.h will be original that we need to define PACKAGE or PACKAGE_VERSION. Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-30tools/bpftool: fix bpftool build with bintutils >= 2.9Roman Gushchin2-0/+19
Bpftool build is broken with binutils version 2.29 and later. The cause is commit 003ca0fd2286 ("Refactor disassembler selection") in the binutils repo, which changed the disassembler() function signature. Fix this by adding a new "feature" to the tools/build/features infrastructure and make it responsible for decision which disassembler() function signature to use. Signed-off-by: Roman Gushchin <guro@fb.com> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-05tools build feature: Check if pthread_barrier_t is availableArnaldo Carvalho de Melo4-0/+22
As 'perf bench futex wake-parallel" will use this, which is not available in older systems such as versions of the android NDK used in my container build tests (r12b and r15c at the moment). Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: James Yang <james.yang@arm.com Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kim Phillips <kim.phillips@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-1i7iv54in4wj08lwo55b0pzv@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman63-0/+63
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28tools build tests: Don't hardcode gcc nameDavid Carrillo-Cisneros1-1/+1
Use $(CC) instead of harcoded gcc binary name. Signed-off-by: David Carrillo-Cisneros <davidcc@google.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Paul Turner <pjt@google.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20170827075442.108534-2-davidcc@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-10Merge branch 'perf/urgent' into perf/core, to pick up fixesIngo Molnar1-0/+2
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-04bpf, s390: fix build for libbpf and selftest suiteDaniel Borkmann1-0/+2
The BPF feature test as well as libbpf is missing the __NR_bpf define for s390 and currently refuses to compile (selftest suite depends on libbpf as well). Similar issue was fixed some time ago via b0c47807d31d ("bpf: Add sparc support to tools and samples."), just do the same and add definitions. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-30Merge branch 'perf/urgent' into perf/core, to pick up latest fixes and ↵Ingo Molnar1-7/+1
refresh the tree Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-18tools build: Add test for setns()Arnaldo Carvalho de Melo4-2/+19
And provide an alternative implementation to keep perf building on older distros as we're about to add initial support for namespaces. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Krister Johansen <kjlx@templeofstupid.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-bqdwijunhjlvps1ardykhw1i@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-06kbuild: simplify silent build (-s) detectionMasahiro Yamada1-7/+1
This allows to detect -s (--silent) option without checking GNU Make version. As commit e36aaea28972 ("kbuild: Fix silent builds with make-4") pointed out, GNU Make 4.x changed the way/order it presents the command line options into MAKEFLAGS. In Make 3.8x, 's' is always the first in a group of short options. The group may be prefixed with '-' in some cases. In Make 4.x, 's' is always the last in a group of short options. As commit e6ac89fabd03 ("kbuild: Correctly deal with make options which contain an 's'") addressed, we also need to deal with long options that contain 's', like --warn-undefined-variables. Test cases: [1] command line input: make --silent -> MAKEFLAGS for Make 3.8x: s -> MAKEFLAGS for Make 4.x : s [2] command line input: make -srR -> MAKEFLAGS for Make 3.8x: sRr -> MAKEFLAGS for Make 4.x : rRs [3] command line input: make -s -rR --warn-undefined-variables -> MAKEFLAGS for Make 3.8x: --warn-undefined-variables -sRr -> MAKEFLAGS for Make 4.x : rRs --warn-undefined-variables My idea to cater to all the cases more easily is to filter out long options (--%), then search 's' with $(findstring ...). This way will be more future-proof even if future versions of Make put 's' in the middle of the group. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-05-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-0/+1
Pull networking fixes from David Miller: 1) Track alignment in BPF verifier so that legitimate programs won't be rejected on !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS architectures. 2) Make tail calls work properly in arm64 BPF JIT, from Deniel Borkmann. 3) Make the configuration and semantics Generic XDP make more sense and don't allow both generic XDP and a driver specific instance to be active at the same time. Also from Daniel. 4) Don't crash on resume in xen-netfront, from Vitaly Kuznetsov. 5) Fix use-after-free in VRF driver, from Gao Feng. 6) Use netdev_alloc_skb_ip_align() to avoid unaligned IP headers in qca_spi driver, from Stefan Wahren. 7) Always run cleanup routines in BPF samples when we get SIGTERM, from Andy Gospodarek. 8) The mdio phy code should bring PHYs out of reset using the shared GPIO lines before invoking bus->reset(). From Florian Fainelli. 9) Some USB descriptor access endian fixes in various drivers from Johan Hovold. 10) Handle PAUSE advertisements properly in mlx5 driver, from Gal Pressman. 11) Fix reversed test in mlx5e_setup_tc(), from Saeed Mahameed. 12) Cure netdev leak in AF_PACKET when using timestamping via control messages. From Douglas Caetano dos Santos. 13) netcp doesn't support HWTSTAMP_FILTER_ALl, reject it. From Miroslav Lichvar. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits) ldmvsw: stop the clean timer at beginning of remove ldmvsw: unregistering netdev before disable hardware net: netcp: fix check of requested timestamping filter ipv6: avoid dad-failures for addresses with NODAD qed: Fix uninitialized data in aRFS infrastructure mdio: mux: fix device_node_continue.cocci warnings net/packet: fix missing net_device reference release net/mlx4_core: Use min3 to select number of MSI-X vectors macvlan: Fix performance issues with vlan tagged packets net: stmmac: use correct pointer when printing normal descriptor ring net/mlx5: Use underlay QPN from the root name space net/mlx5e: IPoIB, Only support regular RQ for now net/mlx5e: Fix setup TC ndo net/mlx5e: Fix ethtool pause support and advertise reporting net/mlx5e: Use the correct pause values for ethtool advertising vmxnet3: ensure that adapter is in proper state during force_close sfc: revert changes to NIC revision numbers net: ch9200: add missing USB-descriptor endianness conversions net: irda: irda-usb: fix firmware name on big-endian hosts net: dsa: mv88e6xxx: add default case to switch ...
2017-05-12Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates/fixes from Ingo Molnar: "Mostly tooling updates, but also two kernel fixes: a call chain handling robustness fix and an x86 PMU driver event definition fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/callchain: Force USER_DS when invoking perf_callchain_user() tools build: Fixup sched_getcpu feature test perf tests kmod-path: Don't fail if compressed modules aren't supported perf annotate: Fix AArch64 comment char perf tools: Fix spelling mistakes perf/x86: Fix Broadwell-EP DRAM RAPL events perf config: Refactor a duplicated code for obtaining config file name perf symbols: Allow user probes on versioned symbols perf symbols: Accept symbols starting at address 0 tools lib string: Adopt prefixcmp() from perf and subcmd perf units: Move parse_tag_value() to units.[ch] perf ui gtk: Move gtk .so name to the only place where it is used perf tools: Move HAS_BOOL define to where perl headers are used perf memswap: Split the byteswap memory range wrappers from util.[ch] perf tools: Move event prototypes from util.h to event.h perf buildid: Move prototypes from util.h to build-id.h
2017-05-11bpf: Add strict alignment flag for BPF_PROG_LOAD.David S. Miller1-0/+1
Add a new field, "prog_flags", and an initial flag value BPF_F_STRICT_ALIGNMENT. When set, the verifier will enforce strict pointer alignment regardless of the setting of CONFIG_EFFICIENT_UNALIGNED_ACCESS. The verifier, in this mode, will also use a fixed value of "2" in place of NET_IP_ALIGN. This facilitates test cases that will exercise and validate this part of the verifier even when run on architectures where alignment doesn't matter. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net>
2017-05-04tools build: Fixup sched_getcpu feature testArnaldo Carvalho de Melo1-0/+2
We have tools/build/feature/test-all.c to speed up feature testing, doing all tests at once, but then all tests in this file should normally pass. That is not the case with the sched-getcpu one, that wasn't passing when included from test-all.c because it needs to have _GNU_SOURCE defined before including sched.h, but _GNU_SOURCE is defined by a header included from another feature test included earlier in test-all.d, test-libpython.c, resulting in: $ cat /tmp/build/perf/feature/test-all.make.output In file included from test-all.c:121:0: test-sched_getcpu.c:1:0: error: "_GNU_SOURCE" redefined [-Werror] #define _GNU_SOURCE In file included from /usr/include/python2.7/pyconfig.h:6:0, from /usr/include/python2.7/Python.h:8, from test-libpython.c:1, from test-all.c:13: /usr/include/python2.7/pyconfig-64.h:1177:0: note: this is the location of the previous definition #define _GNU_SOURCE 1 cc1: all warnings being treated as errors Which would trigger testing the tests individually, when that _GNU_SOURCE redefinition would not take place, and the whole process would continue, just slower... Fix it. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Fixes: 120010cb1eea ("tools build: Add test for sched_getcpu()") Link: http://lkml.kernel.org/n/tip-3qp1it69xsc4w8gnuu1e9ayh@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-05-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-0/+3
Pull networking updates from David Millar: "Here are some highlights from the 2065 networking commits that happened this development cycle: 1) XDP support for IXGBE (John Fastabend) and thunderx (Sunil Kowuri) 2) Add a generic XDP driver, so that anyone can test XDP even if they lack a networking device whose driver has explicit XDP support (me). 3) Sparc64 now has an eBPF JIT too (me) 4) Add a BPF program testing framework via BPF_PROG_TEST_RUN (Alexei Starovoitov) 5) Make netfitler network namespace teardown less expensive (Florian Westphal) 6) Add symmetric hashing support to nft_hash (Laura Garcia Liebana) 7) Implement NAPI and GRO in netvsc driver (Stephen Hemminger) 8) Support TC flower offload statistics in mlxsw (Arkadi Sharshevsky) 9) Multiqueue support in stmmac driver (Joao Pinto) 10) Remove TCP timewait recycling, it never really could possibly work well in the real world and timestamp randomization really zaps any hint of usability this feature had (Soheil Hassas Yeganeh) 11) Support level3 vs level4 ECMP route hashing in ipv4 (Nikolay Aleksandrov) 12) Add socket busy poll support to epoll (Sridhar Samudrala) 13) Netlink extended ACK support (Johannes Berg, Pablo Neira Ayuso, and several others) 14) IPSEC hw offload infrastructure (Steffen Klassert)" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2065 commits) tipc: refactor function tipc_sk_recv_stream() tipc: refactor function tipc_sk_recvmsg() net: thunderx: Optimize page recycling for XDP net: thunderx: Support for XDP header adjustment net: thunderx: Add support for XDP_TX net: thunderx: Add support for XDP_DROP net: thunderx: Add basic XDP support net: thunderx: Cleanup receive buffer allocation net: thunderx: Optimize CQE_TX handling net: thunderx: Optimize RBDR descriptor handling net: thunderx: Support for page recycling ipx: call ipxitf_put() in ioctl error path net: sched: add helpers to handle extended actions qed*: Fix issues in the ptp filter config implementation. qede: Fix concurrency issue in PTP Tx path processing. stmmac: Add support for SIMATIC IOT2000 platform net: hns: fix ethtool_get_strings overflow in hns driver tcp: fix wraparound issue in tcp_lp bpf, arm64: fix jit branch offset related to ldimm64 bpf, arm64: implement jiting of BPF_XADD ...
2017-04-22bpf: Add sparc support to tools and samples.David S. Miller1-0/+3
Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net>
2017-04-13tools build: Fix feature detection redefinion of build flagsDavid Carrillo-Cisneros1-5/+5
This change is a follow up of https://lkml.org/lkml/2017/2/2/16 The patch above avoided redefining CC, CXX and PKG_CONFIG in feature detection. The patch was not merged due to a unsolved concern with the -MD flag. Later, commit c8c188679ccf ("tools build: Use the same CC for feature detection and actual build") did the change for CC and CXX but not PKG_CONFIG. This patch makes PKG_CONFIG consistent with CC and CXX and moves the -MD to CFLAGS, as suggested by Jiri in the thread above. Signed-off-by: David Carrillo-Cisneros <davidcc@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Simon Que <sque@chromium.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20170412064919.92449-3-davidcc@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-12perf tools: Pass PYTHON config to feature detectionDavid Carrillo-Cisneros1-1/+1
( This is a rebased version of https://lkml.org/lkml/2017/2/7/662 ) Python's CC and link Makefile variables were not passed to feature detection, causing feature detection to use system's Python rather than PYTHON_CONFIG's one. This created a mismatch between the detected Python support and the one actually used by perf when PYTHON_CONFIG is specified. Fix it by moving Python's variable initialization to before feature detection and pass FLAGS_PYTHON_EMBED to Python's feature detection's build target. Signed-off-by: David Carrillo-Cisneros <davidcc@google.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: He Kuang <hekuang@huawei.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Simon Que <sque@chromium.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20170412064919.92449-2-davidcc@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-03tools build: Use the same CC for feature detection and actual buildArnaldo Carvalho de Melo1-2/+2
When build with: 'make CC=clang' we were not using that CC to do feature detection, which resulted in features being detected with gcc and then the actual tools being built with clang. Most of the time these compilers are compatible enough, so no problem was being noticed. As soon as a system with an old enough clang, one that hasn't the cpuid.h header is used, and a gcc with it, the "get_cpuid" feature will be found available but then code that will use can't be compiled. Noticed with this combination: / $ gcc --version | head -1 gcc (Alpine 6.3.0) 6.3.0 / $ clang --version | head -1 clang version 3.8.1 (tags/RELEASE_381/final) / $ cat /etc/alpine-release 3.5.0 / $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-60q18nvlvgpyfv7e2qqgx4ou@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-03tools build: Add test for sched_getcpu()Arnaldo Carvalho de Melo4-1/+18
Instead of trying to go on adding more ifdef conditions, do a feature test and define HAVE_SCHED_GETCPU_SUPPORT instead, then use it to provide the prototype. No need to change the stub, as it is already a __weak symbol. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-yge89er9g90sc0v6k0a0r5tr@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-17perf build: Add special fixdep cleaning ruleJiri Olsa2-2/+5
Ingo reported following build failure: On Sat, Feb 11, 2017 at 12:12:34PM +0100, Ingo Molnar wrote: > > So I had this oldish 32-bit 15.10 Ubuntu installation around (fully updated), and > trying to build perf gave me: > > deimos:~/tip/tools/perf> make > BUILD: Doing 'make -j4' parallel build > make[3]: *** No rule to make target '/usr/include/x86_64-linux-gnu/sys/types.h', needed by 'fixdep.o'. Stop. > Makefile:42: recipe for target 'fixdep-in.o' failed > make[2]: *** [fixdep-in.o] Error 2 > /home/mingo/tip/tools/build/Makefile.include:4: recipe for target 'fixdep' failed > make[1]: *** [fixdep] Error 2 > Makefile:68: recipe for target 'all' failed > make: *** [all] Error 2 > > Now this got a bit better after I did a 'make mrproper' in the kernel tree: > > deimos:~/tip/tools/perf> make > BUILD: Doing 'make -j4' parallel build > HOSTCC fixdep.o > /home/mingo/tip/tools/build/fixdep: 1: /home/mingo/tip/tools/build/fixdep: Syntax error: "(" unexpected > /home/mingo/tip/tools/build/Makefile.build:101: recipe for target 'fixdep.o' failed > make[3]: *** [fixdep.o] Error 2 > Makefile:42: recipe for target 'fixdep-in.o' failed > make[2]: *** [fixdep-in.o] Error 2 > /home/mingo/tip/tools/build/Makefile.include:4: recipe for target 'fixdep' failed > make[1]: *** [fixdep] Error 2 > Makefile:68: recipe for target 'all' failed > make: *** [all] Error 2 > > After some digging it turns out that my 'fixdep' binary was 64-bit: > > deimos:~/tip/tools/perf> file /home/mingo/tip/tools/build/fixdep > /home/mingo/tip/tools/build/fixdep: ELF 64-bit LSB executable, x86-64, version 1 > (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux > 2.6.32, BuildID[sha1]=d527f736b57b5ba47210fbcb562a3b52867d21c1, not stripped > > But it did not get cleaned out by 'make clean'. > > Only after I did a 'make clean' in tools/ itself, did it get built properly. It shows we don't clean up properly the fixdep objects, so adding special rule for that. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Reported-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1487340058-10496-2-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-26tools build: Add tools tree support for 'make -s'Josh Poimboeuf1-0/+10
When doing a kernel build with 'make -s', everything is silenced except the objtool build. That's because the tools tree support for silent builds is some combination of missing and broken. Three changes are needed to fix it: - Makefile: propagate '-s' to the sub-make's MAKEFLAGS variable so the tools Makefiles can see it. - tools/scripts/Makefile.include: fix the tools Makefiles' ability to recognize '-s'. The MAKE_VERSION and MAKEFLAGS checks are copied from the top-level Makefile. This silences the "DESCEND objtool" message. - tools/build/Makefile.build: add support to the tools Build files for recognizing '-s'. Again the MAKE_VERSION and MAKEFLAGS checks are copied from the top-level Makefile. This silences all the object compile/link messages. Reported-and-Tested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michal Marek <mmarek@suse.com> Link: http://lkml.kernel.org/r/e8967562ef640c3ae9a76da4ae0f4e47df737c34.1484799200.git.jpoimboe@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-17Merge branch 'kbuild' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild updates from Michal Marek: - prototypes for x86 asm-exported symbols (Adam Borowski) and a warning about missing CRCs (Nick Piggin) - asm-exports fix for LTO (Nicolas Pitre) - thin archives improvements (Nick Piggin) - linker script fix for CONFIG_LD_DEAD_CODE_DATA_ELIMINATION (Nick Piggin) - genksyms support for __builtin_va_list keyword - misc minor fixes * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: x86/kbuild: enable modversions for symbols exported from asm kbuild: fix scripts/adjust_autoksyms.sh* for the no modules case scripts/kallsyms: remove last remnants of --page-offset option make use of make variable CURDIR instead of calling pwd kbuild: cmd_export_list: tighten the sed script kbuild: minor improvement for thin archives build kbuild: modpost warn if export version crc is missing kbuild: keep data tables through dead code elimination kbuild: improve linker compatibility with lib-ksyms.o build genksyms: Regenerate parser kbuild/genksyms: handle va_list type kbuild: thin archives for multi-y targets kbuild: kallsyms allow 3-pass generation if symbols size has changed
2016-12-11make use of make variable CURDIR instead of calling pwdUwe Kleine-König1-1/+1
make already provides the current working directory in a variable, so make use of it instead of forking a shell. Also replace usage of PWD by CURDIR. PWD is provided by most shells, but not all, so this makes the build system more robust. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Michal Marek <mmarek@suse.com>
2016-12-06perf build: Check LLVM version in feature checkWang Nan3-2/+22
Cancel builtin llvm and clang support when LLVM version is less than 3.9.0: following commits uses newer API. Since Clang/LLVM's API is not guaranteed to be stable, add a test-llvm-version.cpp feature checker, issue warning if LLVM found in compiling environment is not tested yet. Committer Notes: Testing it: Environment: $ cat /etc/fedora-release Fedora release 25 (Twenty Five) $ rpm -q llvm-devel clang-devel llvm-devel-3.8.0-1.fc25.x86_64 clang-devel-3.8.0-2.fc25.x86_64 $ Before: $ make -k LIBCLANGLLVM=1 O=/tmp/build/perf -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' BUILD: Doing 'make -j4' parallel build Warning: tools/include/uapi/linux/bpf.h differs from kernel Warning: tools/arch/arm/include/uapi/asm/kvm.h differs from kernel INSTALL GTK UI LINK /tmp/build/perf/perf /tmp/build/perf/libperf.a(libperf-in.o): In function `perf::createCompilerInvocation(llvm::SmallVector<char const*, 16u>, llvm::StringRef&, clang::DiagnosticsEngine&)': /home/acme/git/linux/tools/perf/util/c++/clang.cpp:56: undefined reference to `clang::tooling::newInvocation(clang::DiagnosticsEngine*, llvm::SmallVector<char const*, 16u> const&)' /tmp/build/perf/libperf.a(libperf-in.o): In function `perf::getModuleFromSource(llvm::SmallVector<char const*, 16u>, llvm::StringRef, llvm::IntrusiveRefCntPtr<clang::vfs::FileSystem>)': /home/acme/git/linux/tools/perf/util/c++/clang.cpp:68: undefined reference to `clang::CompilerInstance::CompilerInstance(std::shared_ptr<clang::PCHContainerOperations>, bool)' /home/acme/git/linux/tools/perf/util/c++/clang.cpp:69: undefined reference to `clang::CompilerInstance::createDiagnostics(clang::DiagnosticConsumer*, bool)' <SNIP> After: Makefile.config:807: No suitable libLLVM found, disabling builtin clang and llvm support. Please install llvm-dev(el) (>= 3.9.0) Updating the environment to a locally built LLVM 4.0 + clang 3.9 (forgot to git pull, duh) combo, all works as expected, it is properly detected and built into the resulting perf binary. Signed-off-by: Wang Nan <wangnan0@huawei.com> Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joe Stringer <joe@ovn.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161206072230.7651-1-wangnan0@huawei.com [ Change the warning message a bit (add 'suitable' and 'builtin'), clarifying it, see committer notes above ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-05tools build: Move tabs to spaces where suitableJiri Olsa3-126/+126
We've been hit several times by a Makefile bug where line indented by tab was falsely considered as target command. We prevent this by always using space indentation for everything except for the target commands. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1480884178-8072-3-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-05tools build: Make the .cmd file more readableJiri Olsa1-1/+1
Putting extra line between dependencies and cmd_* definition to make it more readable. Before: $ cat .builtin-top.o.cmd ... /home/jolsa/kernel/linux-perf/tools/include/linux/stringify.h \ /home/jolsa/kernel/linux-perf/tools/include/linux/time64.h cmd_builtin-top.o := gcc -Wp,-MD,./.builtin-top.o.d -Wp,-MT,builtin-... ... After: $ cat .builtin-top.o.cmd ... /home/jolsa/kernel/linux-perf/tools/include/linux/stringify.h \ /home/jolsa/kernel/linux-perf/tools/include/linux/time64.h cmd_builtin-top.o := gcc -Wp,-MD,./.builtin-top.o.d -Wp,-MT,builtin-... ... Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1480884178-8072-2-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-05tools build: Add feature detection for clangWang Nan2-0/+31
Check if basic clang compiling environment is ready. Doesn't like 'llvm-config --libs' which can returns llvm libraries in right order and duplicates some libraries if necessary, there's no correspondence for clang libraries (-lclangxxx). to avoid extra complexity and to avoid new clang breaking libraries ordering, use --start-group and --end-group. In this test case, manually identify required clang libs and hope it to be stable. Putting all clang libraries here is possible (use make's wildcard), but then feature checking becomes very slow. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joe Stringer <joe@ovn.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161126070354.141764-9-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-05tools build: Add feature detection for LLVMWang Nan2-0/+16
Check if basic LLVM compiling environment is ready. Use llvm-config to detect include and library directories. Avoid using 'llvm-config --cxxflags' because its result contain some unwanted flags like --sysroot (if LLVM is built by yocto). Use '?=' to set LLVM_CONFIG, so explicitly passing LLVM_CONFIG to make would override it. Use 'llvm-config --libs BPF' to check if BPF backend is compiled in. Since now BPF bytecode is the only required backend, no need to waste time linking llvm and clang if BPF backend is missing. This also introduce an implicit requirement that LLVM should be new enough. Old LLVM doesn't support BPF backend. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joe Stringer <joe@ovn.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161126070354.141764-8-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>